Sequence-specific detection of individual DNA strands using engineered nanopores

Comparative analysis of nucleotide translocation through protein nanopores using steered molecular dynamics and an adaptive biasing force

The translocation of nucleotide molecules across biological and synthetic nanopores has attracted attention as a next generation technique for sequencing DNA. Computer simulations have the ability to provide atomistic-level insight into important states and processes, delivering a means to develop a fundamental understanding of the translocation event, for example, by extracting the free energy of the process. Even with current supercomputing facilities, the simulation of many-atom systems in fine detail is limited to shorter timescales than the real events they attempt to recreate. This imposes the need for enhanced simulation techniques that expand the scope of investigation in a given timeframe. There are numerous free energy calculation and translocation methodologies available, and it is by no means clear which method is best applied to a particular problem. This article explores the use of two popular free energy calculation methodologies in a nucleotide-nanopore translocation system, using the α-hemolysin nanopore. The first uses constant velocity-steered molecular dynamics (cv-SMD) in conjunction with Jarzynski's equality. The second applies an adaptive biasing force (ABF), which has not previously been applied to the nucleotide-nanpore system. The purpose of this study is to provide a comprehensive comparison of these methodologies, allowing for a detailed comparative assessment of the scientific merits, the computational cost, and the statistical quality of the data obtained from each technique. We find that the ABF method produces results that are closer to experimental measurements than those from cv-SMD, whereas the net errors are smaller for the same computational cost.

DNA translocation through short nanofluidic channels under asymmetric pulsed electric field

Investigation of single molecule DNA dynamics in confined environments has led to important applications in DNA analysis, separation, and sequencing. Here, we studied the electrophoretic transport of DNA molecules through nanochannels shorter than the DNA contour length and calculated the associated translocation time curves. We found that the longer T4 DNA molecules required a longer time to traverse a fixed length nanochannel than shorter λ DNA molecules and that the translocation time decreased with increasing electric field which agreed with theoretical predictions. We applied this knowledge to design an asymmetric electric pulse and demonstrate the different responses of λ and T4 DNA to the pulses. We used Brownian dynamics simulations to corroborate our experimental results on DNA translocation behaviour. This work contributes to the fundamental understanding of polymer transport through nanochannels and may help in designing better separation techniques in the future.

Detection of 3'-end RNA uridylation with a protein nanopore

Post-transcriptional modifications of the 3'-ends of RNA molecules have a profound impact on their stability and processing in the cell. Uridylation, the addition of uridines to 3'-ends, has recently been found to be an important regulatory signal to stabilize the tagged molecules or to direct them toward degradation. Simple and cost-effective methods for the detection of this post-transcriptional modification are not yet available. Here, we demonstrate the selective and transient binding of 3'-uridylated ssRNAs inside the β barrel of the staphylococcal α-hemolysin (αHL) nanopore and investigate the molecular basis of uridine recognition by the pore. We show the discrimination of 3'-oligouridine tails on the basis of their lengths and propose the αHL nanopore as a useful sensor for this biologically relevant RNA modification.

Polymer escape from a confining potential

The rate of escape of polymers from a two-dimensionally confining potential well has been evaluated using self-avoiding as well as ideal chain representations of varying length, up to 80 beads. Long timescale Langevin trajectories were calculated using the path integral hyperdynamics method to evaluate the escape rate. A minimum is found in the rate for self-avoiding polymers of intermediate length while the escape rate decreases monotonically with polymer length for ideal polymers. The increase in the rate for long, self-avoiding polymers is ascribed to crowding in the potential well which reduces the free energy escape barrier. An effective potential curve obtained using the centroid as an independent variable was evaluated by thermodynamic averaging and Kramers rate theory then applied to estimate the escape rate. While the qualitative features are well reproduced by this approach, it significantly overestimates the rate, especially for the longer polymers. The reason for this is illustrated by constructing a two-dimensional effective energy surface using the radius of gyration as well as the centroid as controlled variables. This shows that the description of a transition state dividing surface using only the centroid fails to confine the system to the region corresponding to the free energy barrier and this problem becomes more pronounced the longer the polymer is. A proper definition of a transition state for polymer escape needs to take into account the shape as well as the location of the polymer.

Single-molecule site-specific detection of protein phosphorylation with a nanopore

We demonstrate single-molecule, site-specific detection of protein phosphorylation with protein nanopore technology. A model protein, thioredoxin, was phosphorylated at two adjacent sites. Analysis of the ionic current amplitude and noise, as the protein unfolds and moves through an α-hemolysin pore, enables the distinction between unphosphorylated, monophosphorylated and diphosphorylated variants. Our results provide a step toward nanopore proteomics.

A rapid and sensitive detection of HBV DNA using a nanopore sensor

The simplest single-molecule nanopore sensor can be used for the rapid and sensitive detection of pathogenic DNA at the single-base recognition level.

Nanopore stochastic detection: diversity, sensitivity, and beyond

Nanopore sensors have emerged as a label-free and amplification-free technique for measuring single molecules. First proposed in the mid-1990s, nanopore detection takes advantage of the ionic current modulations produced by the passage of target analytes through a single nanopore at a fixed applied potential. Over the last 15 years, these nanoscale pores have been used to sequence DNA, to study covalent and non-covalent bonding interactions, to investigate biomolecular folding and unfolding, and for other applications. A major issue in the application of nanopore sensors is the rapid transport of target analyte molecules through the nanopore. Current recording techniques do not always accurately detect these rapid events. Therefore, researchers have looked for methods that slow molecular and ionic transport. Thus far, several strategies can improve the resolution and sensitivity of nanopore sensors including variation of the experimental conditions, use of a host compound, and modification of the analyte molecule and the nanopore sensor. In this Account, we highlight our recent research efforts that have focused on applications of nanopore sensors including the differentiation of chiral molecules, the study of enzyme kinetics, and the determination of sample purity and composition. Then we summarize our efforts to regulate molecular transport. We show that the introduction of various surface functional groups such as hydrophobic, aromatic, positively charged, and negatively charged residues in the nanopore interior, an increase in the ionic strength of the electrolyte solution, and the use of ionic liquid solutions as the electrolyte instead of inorganic salts may improve the resolution and sensitivity of nanopore stochastic sensors. Our experiments also demonstrate that the introduction of multiple functional groups into a single nanopore and the development of a pattern-recognition nanopore sensor array could further enhance sensor resolution. Although we have demonstrated the feasibility of nanopore sensors for various applications, challenges remain before nanopore sensing is deployed for routine use in applications such as medical diagnosis, homeland security, pharmaceutical screening, and environmental monitoring.

Decreased aperture surface energy enhances electrical, mechanical, and temporal stability of suspended lipid membranes

The development of next-generation transmembrane protein-based biosensors relies heavily on the use of black lipid membranes (BLMs); however, electrical, mechanical, and temporal instability of BLMs poses a limiting challenge to biosensor development. In this work, micrometer-sized glass apertures were modified with silanes of different chain length and fluorine composition, including 3-cyanopropyldimethychlorosilane (CPDCS), ethyldimethylchlorosilane (EDCS), n-octyldimethylchlorosilane (ODCS), (tridecafluoro-1, 1, 2, 2-tetrahydrooctyl)dimethylchlorosilane (PFDCS), or (heptadecafluoro-1,1,2,2-tetrahydrodecyl)dimethylchlorosilane (PFDDCS), to explore the effect of substrate surface energy on BLM stability. Low energy silane-modified surfaces promoted enhanced lipid-substrate interactions that facilitate the formation of low-leakage, stable BLMs. The surface energies of silane-modified substrates were 30 ± 3, 16 ± 1, 14 ± 2, 11 ± 1, and 7.1 ± 2 mJ m(-2) for CDCS, EDCS, ODCS, PFDCS, and PFDDCS, respectively. Decreased surface energy directly correlated to improved electrical, mechanical, and temporal BLM stability. Amphiphobic perfluorinated surface modifiers yielded superior performance compared to traditional hydrocarbon modifiers in terms of stability and BLM formation, with only marginal effects on BLM membrane permeability. Leakage currents obtained for PFDCS and PFDDCS BLMs were elevated only 10-30%, though PFDDCS modification yielded >5-fold increase in electrical stability as indicated by breakdown voltage (> 2000 mV vs 418 ± 73 mV), and >25-fold increase in mechanical stability as indicated by air-water transfers (> 50 vs 2 ± 0.2) when compared to previously reported CPDCS modification. Importantly, the dramatically improved membrane stabilities were achieved with no deleterious effects on reconstituted ion channel function, as evidenced by α-hemolysin activity. Thus, this approach provides a simple, low cost, and broadly applicable alternative for BLM stabilization and should contribute significantly toward the development of next-generation ion-channel-functionalized biosensors.

Stochastic detection of Pim protein kinases reveals electrostatically enhanced association of a peptide substrate

In stochastic sensing, the association and dissociation of analyte molecules is observed as the modulation of an ionic current flowing through a single engineered protein pore, enabling the label-free determination of rate and equilibrium constants with respect to a specific binding site. We engineered sensors based on the staphylococcal α-hemolysin pore to allow the single-molecule detection and characterization of protein kinase-peptide interactions. We enhanced this approach by using site-specific proteolysis to generate pores bearing a single peptide sensor element attached by an N-terminal peptide bond to the trans mouth of the pore. Kinetics and affinities for the Pim protein kinases (Pim-1, Pim-2, and Pim-3) and cAMP-dependent protein kinase were measured and found to be independent of membrane potential and in good agreement with previously reported data. Kinase binding exhibited a distinct current noise behavior that forms a basis for analyte discrimination. Finally, we observed unusually high association rate constants for the interaction of Pim kinases with their consensus substrate Pimtide (~10(7) to 10(8) M(-1) · s(-1)), the result of electrostatic enhancement, and propose a cellular role for this phenomenon.

Structural destabilization of DNA duplexes containing single-base lesions investigated by nanopore measurements

The influence of DNA duplex structural destabilization introduced by a single base-pair modification was investigated by nanopore measurements. A series of 11 modified base pairs were introduced into the context of an otherwise complementary DNA duplex formed by a 17-mer and a 65-mer such that the overhanging ends comprised poly(dT)23 tails, generating a representative set of duplexes that display a range of unzipping mechanistic behaviors and kinetic stabilities. The guanine oxidation products 8-oxo-7,8-dihydroguanine (OG), guanidinohydantoin (Gh), and spiroiminodihydantoin (Sp) were paired with either cytosine (C), adenine (A), or 2,6-diaminopurine (D) to form modified base pairs. The mechanism and kinetic rate constants of duplex dissociation were determined by threading either the 3' or 5' overhangs into an α-hemolysin (α-HL) channel under an electrical field and measuring the distributions of unzipping times at constant force. In order of decreasing thermodynamic stability (as measured by duplex melting points), the rate of duplex dissociation increases, and the mechanism evolves from a first-order reaction to two sequential first-order reactions. These measurements allow us to rank the kinetic stability of lesion-containing duplexes relative to the canonical G:C base pair in which the OG:C, Gh:C, and Sp:C base pairs are, respectively, 3-200 times less stable. The rate constants also depend on whether unzipping was initiated from the 3' versus 5' side of the duplex. The kinetic stability of these duplexes was interpreted in terms of the structural destabilization introduced by the single base-pair modification. Specifically, a large distortion of the duplex backbone introduced by the presence of the highly oxidized guanine products Sp and Gh leads to a rapid two-step unzipping. The number of hydrogen bonds in the modified base pair plays a lesser role in determining the kinetics of duplex dissociation.

Strategies for the multiplex mapping of genes to traits

Rewiring and optimization of metabolic networks to enable the production of commercially valuable chemicals is a central goal of metabolic engineering. This prospect is challenged by the complexity of metabolic networks, lack of complete knowledge of gene function(s), and the vast combinatorial genotype space that is available for exploration and optimization. Various approaches have thus been developed to aid in the efficient identification of genes that contribute to a variety of different phenotypes, allowing more rapid design and engineering of traits desired for industrial applications. This review will highlight recent technologies that have enhanced capabilities to map genotype-phenotype relationships on a genome wide scale and emphasize how such approaches enable more efficient design and engineering of complex phenotypes.

Nanopore detection of copper ions using a polyhistidine probe

We report a stochastic nanopore sensing method for the detection of Cu(2+) ions. By employing a polyhistidine molecule as a chelating agent, and based on the different signatures of the events produced by the translocation of the chelating agent through an α-hemolysin pore in the absence and presence of target analytes, trace amounts of copper ions could be detected with a detection limit of 40 nM. Importantly, although Co(2+), Ni(2+), and Zn(2+) also interacts with the polyhistidine molecule, since the event residence times and/or blockage amplitudes for these metal chelates are significantly different from those of copper chelates, these metal ions do not interfere with Cu(2+) detection. This chelating reaction approach should find useful application in the development of nanopore sensors for other metal ions.

Tuning the size and properties of ClyA nanopores assisted by directed evolution

Nanopores have recently emerged as powerful tools in single-molecule investigations. Biological nanopores, however, have drawbacks, including a fixed size and limited stability in lipid bilayers. Inspired by the great success of directed evolution approaches in tailoring enzyme properties, in this work we evolved Cytolysin A from Salmonella typhi (ClyA) to a high level of soluble expression and desired electrical properties in lipid bilayers. Evolved ClyA nanopores remained open up to -150 mV applied potential, which allowed the detailed characterization of folded proteins by ionic current recordings. Remarkably, we also found that ClyA forms several nanopore species; among which we could isolate and characterize three nanopore types most likely corresponding to the 12mer, 13mer, and 14mer oligomeric forms of ClyA. Protein current blockades to the three ClyA nanopores showed that subnanometer variations in the diameter of nanopores greatly affect the recognition of analyte proteins.

A Straight Nanopore Drilling by Transmission Electron Microscope

For nanopore drilling in a membrane by transmission electron microscope, a straight through-pore is in general not the case of the fabrication result. For instance, a silicon nitride nanopore with an hourglass profile and a silicon oxide nanopore with a pyramid cross-section were reported in recent researches. The reason for not getting a straight through-pore by the electron drilling was analyzed. A hypothesis, which improving heat conduction property of the membrane would lead to a straight nanopore drilling, was proposed. And the hypothesis was confirmed true.

Disentangling steric and electrostatic factors in nanoscale transport through confined space

The voltage-driven passage of biological polymers through nanoscale pores is an analytically, technologically, and biologically relevant process. Despite various studies on homopolymer translocation there are still several open questions on the fundamental aspects of pore transport. One of the most important unresolved issues revolves around the passage of biopolymers which vary in charge and volume along their sequence. Here we exploit an experimentally tunable system to disentangle and quantify electrostatic and steric factors. This new, fundamental framework facilitates the understanding of how complex biopolymers are transported through confined space and indicates how their translocation can be slowed down to enable future sensing methods.

Self-assembled DNA nanopores that span lipid bilayers

DNA nanotechnology excels at rationally designing bottom-up structures that can functionally replicate naturally occurring proteins. Here we describe the design and generation of a stable DNA-based nanopore that structurally mimics the amphiphilic nature of protein pores and inserts into bilayers to support a steady transmembrane flow of ions. The pore carries an outer hydrophobic belt comprised of small chemical alkyl groups which mask the negatively charged oligonucleotide backbone. This modification overcomes the otherwise inherent energetic mismatch to the hydrophobic environment of the membrane. By merging the fields of nanopores and DNA nanotechnology, we expect that the small membrane-spanning DNA pore will help open up the design of entirely new molecular devices for a broad range of applications including sensing, electric circuits, catalysis, and research into nanofluidics and controlled transmembrane transport.

Probing mercury(II)-DNA interactions by nanopore stochastic sensing

In this work, DNA-Hg(II) interactions were investigated by monitoring the translocation of DNA hairpins in a protein ion channel in the absence and presence of metal ions. Our experiments demonstrate that target-specific hairpin structures could be stabilized much more significantly by mercuric ions than by the stem length and the loop size of the hairpin due to the formation of Thymine-Hg(II)-Thymine complexes. In addition, the designed DNA probe allows the development of a highly sensitive nanopore sensor for Hg(2+) with a detection limit of 25 nM. Further, the sensor is specific, and other tested metal ions including Pb(2+), Cu(2+), Cd(2+), and so on with concentrations of up to 2 orders of magnitude greater than that of Hg(2+) would not interfere with the mercury detection.

Multistep protein unfolding during nanopore translocation

Cells are divided into compartments and separated from the environment by lipid bilayer membranes. Essential molecules are transported back and forth across the membranes. We have investigated how folded proteins use narrow transmembrane pores to move between compartments. During this process, the proteins must unfold. To examine co-translocational unfolding of individual molecules, we tagged protein substrates with oligonucleotides to enable potential-driven unidirectional movement through a model protein nanopore, a process that differs fundamentally from extension during force spectroscopy measurements. Our findings support a four-step translocation mechanism for model thioredoxin substrates. First, the DNA tag is captured by the pore. Second, the oligonucleotide is pulled through the pore, causing local unfolding of the C terminus of the thioredoxin adjacent to the pore entrance. Third, the remainder of the protein unfolds spontaneously. Finally, the unfolded polypeptide diffuses through the pore into the recipient compartment. The unfolding pathway elucidated here differs from those revealed by denaturation experiments in solution, for which two-state mechanisms have been proposed.

Translocation of a polymer through a nanopore modulated by a sticky site

Using a one-dimensional model for the translocation of a polymer through a nanopore, the effect of a "sticky site" at which the polymer binds to the pore is explored via exact numerical techniques. Results for the mean translocation time and the probability of translocation on the insertion of the first monomer in the pore are generated across a wide range of driving forces and binding potential strengths (well depths). The balance between the driving force, diffusion, and well depth yields a rich set of dynamics that depend strongly on where the sticky site is located along the polymer. For example, when the sticky site is located near the head of the polymer, the translocation time is found to be a maximum at an intermediate driving force with events at lower driving forces taking less time. Additionally, the critical well depth at which the sticky site dominates the dynamics, is found to be a non-monotonic function of the driving force when the sticky site is located at the head or tail of the polymer, but not in the middle. Modeling of the process yields good agreement with simulation results.

Biosensors: sense and sensibility

This review is based on the Theophilus Redwood Medal and Award lectures, delivered to Royal Society of Chemistry meetings in the UK and Ireland in 2012, and presents a personal overview of the field of biosensors. The biosensors industry is now worth billions of United States dollars, the topic attracts the attention of national initiatives across the world and tens of thousands of papers have been published in the area. This plethora of information is condensed into a concise account of the key achievements to date. The reasons for success are examined, some of the more exciting emerging technologies are highlighted and the author speculates on the importance of biosensors as a ubiquitous technology of the future for health and the maintenance of wellbeing.

Solid-State and Biological Nanopore for Real-Time Sensing of Single Chemical and Sequencing of DNA

Sensitivity and specificity are two most important factors to take into account for molecule sensing, chemical detection and disease diagnosis. A perfect sensitivity is to reach the level where a single molecule can be detected. An ideal specificity is to reach the level where the substance can be detected in the presence of many contaminants. The rapidly progressing nanopore technology is approaching this threshold. A wide assortment of biomotors and cellular pores in living organisms perform diverse biological functions. The elegant design of these transportation machineries has inspired the development of single molecule detection based on modulations of the individual current blockage events. The dynamic growth of nanotechnology and nanobiotechnology has stimulated rapid advances in the study of nanopore based instrumentation over the last decade, and inspired great interest in sensing of single molecules including ions, nucleotides, enantiomers, drugs, and polymers such as PEG, RNA, DNA, and polypeptides. This sensing technology has been extended to medical diagnostics and third generation high throughput DNA sequencing. This review covers current nanopore detection platforms including both biological pores and solid state counterparts. Several biological nanopores have been studied over the years, but this review will focus on the three best characterized systems including α-hemolysin and MspA, both containing a smaller channel for the detection of single-strand DNA, as well as bacteriophage phi29 DNA packaging motor connector that contains a larger channel for the passing of double stranded DNA. The advantage and disadvantage of each system are compared; their current and potential applications in nanomedicine, biotechnology, and nanotechnology are discussed.

Aggregation and dynamics of oligocholate transporters in phospholipid bilayers revealed by solid-state NMR spectroscopy

Macrocycles made of cholate building blocks were previously found to transport glucose readily across lipid bilayers. In this study, an (15)N, (13)Cα-labeled glycine was inserted into a cyclic cholate trimer and attached at the end of a linear trimer, respectively. The isotopic labeling allowed us to use solid-state NMR spectroscopy to study the dynamics, aggregation, and depth of insertion of these compounds in lipid membranes. The cyclic compound was found to be mostly immobilized in DLPC, POPC/POPG, and POPC/POPG/cholesterol membranes, whereas the linear trimer displayed large-amplitude motion that depended on the membrane thickness and viscosity. (13)C-detected (1)H spin diffusion experiments revealed the depth of insertion of the compounds in the membranes, as well as their contact with water molecules. The data support a consistent stacking model for the cholate macrocycles in lipid membranes, driven by the hydrophobic interactions of the water molecules in the interior of the macrocycles. The study also shows a strong preference of the linear trimer for the membrane surface, consistent with its lack of transport activity in earlier liposome leakage assays.

Detection of miRNAs with a nanopore single-molecule counter

miRNAs are short noncoding RNA molecules that are important in regulating gene expression. Due to the correlation of their expression levels and various diseases, miRNAs are being investigated as potential biomarkers for molecular diagnostics. The fast-growing miRNA exploration demands rapid, accurate, low-cost miRNA detection technologies. This article will focus on two platforms of nanopore single-molecule approach that can quantitatively measure miRNA levels in samples from tissue and cancer patient plasma. Both nanopore methods are sensitive and specific, and do not need labeling, enzymatic reaction or amplification. In the next 5 years, the nanopore-based miRNA techniques will be improved and validated for noninvasive and early diagnosis of diseases.

Recent advances in nanopore sequencing

The prospect of nanopores as a next-generation sequencing platform has been a topic of growing interest and considerable government-sponsored research for more than a decade. Oxford Nanopore Technologies recently announced the first commercial nanopore sequencing devices, to be made available by the end of 2012, while other companies (Life, Roche, and IBM) are also pursuing nanopore sequencing approaches. In this paper, the state of the art in nanopore sequencing is reviewed, focusing on the most recent contributions that have or promise to have next-generation sequencing commercial potential. We consider also the scalability of the circuitry to support multichannel arrays of nanopores in future sequencing devices, which is critical to commercial viability.

Optofluidic devices and applications in photonics, sensing and imaging

Optofluidics integrates the fields of photonics and microfluidics, providing new freedom to both fields and permitting the realization of optical and fluidic property manipulations at the chip scale. Optofluidics was formed only after many breakthroughs in microfluidics, as understanding of fluid behaviour at the micron level enabled researchers to combine the advantages of optics and fluids. This review describes the progress of optofluidics from a photonics perspective, highlighting various optofluidic aspects ranging from the device's property manipulation to an interactive integration between optics and fluids. First, we describe photonic elements based on the functionalities that enable fluid manipulation. We then discuss the applications of optofluidic biodetection with an emphasis on nanosensing. Next, we discuss the progress of optofluidic lenses with an emphasis on its various architectures, and finally we conceptualize on where the field may lead.

Nanochannels preparation and application in biosensing

Selective transport in nanochannels (protein-based ion channels) is already used in living systems for electrical signaling in nerves and muscles, and this natural behavior is being approached for the application of biomimetic nanochannels in biosensors. On the basis of this principle, single nanochannels and nanochannel arrays seem to bring new advantages for biosensor development and applications. The purpose of this review is to provide a general comprehensive and critical overview on the latest trends in the development of nanochannel-based biosensing systems. A detailed description and discussion of representative and recent works covering the main nanochannel fabrication techniques, nanoporous material characterizations, and especially their application in both electrochemical and optical sensing systems is given. The state-of-the-art of the developed technology may open the way to new advances in the integration of nanochannels with (bio)molecules and synthetic receptors for the development of novel biodetection systems that can be extended to many other applications with interest for clinical analysis, safety, and security as well as environmental and other industrial studies and applications.

Sequence-specific nucleic acid detection from binary pore conductance measurement

We describe a platform for sequence-specific nucleic acid (NA) detection utilizing a micropipet tapered to a 2 μm diameter pore and 3 μm diameter polystyrene beads to which uncharged peptide nucleic acid (PNA) probe molecules have been conjugated. As the target NAs hybridize to the complementary PNA-beads, the beads acquire negative charge and become electrophoretically mobile. An applied electric field guides these NA-PNA-beads toward the pipet tip, which they obstruct, leading to an indefinite, electrically detectable, partial blockade of the pore. In the presence of noncomplementary NA, even to the level of single base mismatch, permanent pore blockade is not seen. We show application of this platform to detection of the anthrax lethal factor sequence.

An engineered ClyA nanopore detects folded target proteins by selective external association and pore entry

Nanopores have been used in label-free single-molecule studies, including investigations of chemical reactions, nucleic acid analysis, and applications in sensing. Biological nanopores generally perform better than artificial nanopores as sensors, but they have disadvantages including a fixed diameter. Here we introduce a biological nanopore ClyA that is wide enough to sample and distinguish large analyte proteins, which enter the pore lumen. Remarkably, human and bovine thrombins, despite 86% sequence identity, elicit characteristic ionic current blockades, which at -50 mV differ in their main current levels by 26 ± 1 pA. The use of DNA aptamers or hirudin as ligands further distinguished the protein analytes. Finally, we constructed ClyA nanopores decorated with covalently attached aptamers. These nanopores selectively captured and internalized cognate protein analytes but excluded noncognate analytes, in a process that resembles transport by nuclear pores.

Molecular dynamics study of MspA arginine mutants predicts slow DNA translocations and ion current blockades indicative of DNA sequence

The protein nanopore Mycobacteria smegmatis porin A (MspA), can be used to sense individual nucleotides within DNA, potentially enabling a technique known as nanopore sequencing. In this technique, single-stranded DNA electrophoretically moves through the nanopore and results in an ionic current that is nucleotide-specific. However, with a high transport velocity of the DNA within the nanopore, the ionic current cannot be used to distinguish signals within noise. Through extensive (~100 μs in total) all-atom molecular dynamics simulations, we examine the effect of positively charged residues on DNA translocation rate and the ionic current blockades in MspA. Simulation of several arginine mutations show a ~10-30 fold reduction of DNA translocation speed without eliminating the nucleotide induced current blockages. Comparison of our results with similar engineering efforts on a different nanopore (α-hemolysin) reveals a nontrivial effect of nanopore geometry on the ionic current blockades in mutant nanopores.

Unzipping kinetics of duplex DNA containing oxidized lesions in an α-hemolysin nanopore

The unzipping kinetics for lesion-containing DNA duplexes was studied in an α-hemolysin (α-HL) nanopore. The lesion of focus was the guanine two-electron oxidation product, 8-oxo-7,8-dihydroguanine (OG), and its further oxidation products, the hydantoins guanidinohydantoin (Gh) and spiroiminodihydantoin (Sp). The voltage-driven unzipping of individual duplex DNA molecules with symmetrical overhangs was carried out by pulling one strand of the duplex through the α-HL channel using an electrical field. Entry from the 3' or 5' end produced distinct current blockages, allowing directional effects on unzipping kinetics to be investigated. We find that the strand dissociation of complementary duplexes or duplexes containing the slightly destabilizing lesion OG follows a first-order kinetic model, while opening of duplexes that contain the highly destabilizing lesions Gh or Sp is described by two sequential first-order reactions, in which the intermediate state is proposed to correspond to the duplex unzipped to the lesion site within the channel. The rate constants for strand separation of the duplexes containing single lesions were obtained from kinetic model fits to histograms of unzipping duration. For all duplexes, the rate constants for strand separation displayed a significant dependence on the direction of entry into the nanopore. For duplexes containing Gh, truncated duplexes were used to assign the measured rate constants for the first and second unzipping steps of symmetrically designed duplexes.

DNA origami gatekeepers for solid-state nanopores

DNA has it covered: DNA origami gatekeeper nanoplates convert nanopores in solid-state membranes into versatile devices for label-free macromolecular sensing applications. The custom apertures in the nanoplates can be chemically addressed for sequence-specific detection of DNA.

Single-molecule investigation of G-quadruplex using a nanopore sensor

This review article introduces the nanopore single-molecule method for the study of G-quadruplex nucleic acid structures. Single G-quadruplexes can be trapped into a 2 nm protein pore embedded in the lipid bilayer membrane. The trapped G-quadruplex specifically blocks the current through the nanopore, creating a signature event for quantitative analysis of G-quadruplex properties, from cation-determined folding and unfolding kinetics to the interactions with the protein ligand. The nanopore single-molecule method is simple, accurate, and requires no labels. It can be used to evaluate G-quadruplex mechanisms and it may have applications in G-quadruplex-based biosensors, nanomachines, and nanostructure assembly.

Stochastic sensing of proteins with receptor-modified solid-state nanopores

Solid-state nanopores are capable of the label-free analysis of single molecules. It is possible to add biochemical selectivity by anchoring a molecular receptor inside the nanopore, but it is difficult to maintain single-molecule sensitivity in these modified nanopores. Here, we show that metallized silicon nitride nanopores chemically modified with nitrilotriacetic acid receptors can be used for the stochastic sensing of proteins. The reversible binding and unbinding of the proteins to the receptors is observed in real time, and the interaction parameters are statistically analysed from single-molecule binding events. To demonstrate the versatile nature of this approach, we detect His-tagged proteins and discriminate between the subclasses of rodent IgG antibodies.

Nanoporous waveguide sensor with optimized nanoarchitectures for highly sensitive label-free biosensing

Label-free optical biosensors have attracted much attention, and nanoporous metal-oxide membranes with uniform pore structure and diameter are promising candidates for platforms of label-free optical biosensors. However, development of such sensors with high sensitivity still remains challenging. In this paper, we report on the remarkably enhanced sensitivity of a label-free nanoporous optical waveguide (NPWG) sensor composed of a porous anodic alumina (PAA) waveguiding film and an aluminum cladding film. The enhanced sensitivity was achieved by engineering nanostructures and tuning optical properties of the PAA film. Careful tuning of the porosity, pore density, thickness, and refractive index of the PAA film could significantly improve the sensitivity of the NPWG sensor toward adsorption of bovine serum albumin (BSA) onto the PAA surface, and the optimized sensor responded to the adsorption of BSA with an extraordinarily large red shift (>300 nm) of a waveguide mode due to the large adsorption capacity of the PAA film and the inherently high sensitivity of the waveguide mode. The Fresnel calculations suggested that the potential sensitivity of the NPWG sensor was much higher than that of the conventional surface plasmon resonance (SPR) sensors.

Third-generation sequencing techniques and applications to drug discovery

INTRODUCTION

There is an immediate need for functional and molecular studies to decipher differences between disease and 'normal' settings to identify large quantities of validated targets with the highest therapeutic utilities. Furthermore, drug mechanism of action and biomarkers to predict drug efficacy and safety need to be identified for effective design of clinical trials, decreasing attrition rates, regulatory agency approval process and drug repositioning. By expanding the power of genetics and pharmacogenetics studies, next-generation nucleic acid sequencing technologies have started to play an important role in all stages of drug discovery.

AREAS COVERED

This article reviews the first- and second-generation sequencing technologies (SGSTs) and challenges they pose to biomedicine. The article then focuses on the emerging third-generation sequencing technologies (TGSTs), their technological foundations and potential contributions to drug discovery.

EXPERT OPINION

Despite the scientific and commercial success of SGSTs, the goal of rapid, comprehensive and unbiased sequencing of nucleic acids has not been achieved. TGSTs promise to increase sequencing throughput and read lengths, decrease costs, run times and error rates, eliminate biases inherent in SGSTs and offer capabilities beyond nucleic acid sequencing. Such changes will have positive impact on all sequencing applications to drug discovery.

Applications of next-generation sequencing in plant biology

The last several years have seen revolutionary advances in DNA sequencing technologies with the advent of next-generation sequencing (NGS) techniques. NGS methods now allow millions of bases to be sequenced in one round, at a fraction of the cost relative to traditional Sanger sequencing. As costs and capabilities of these technologies continue to improve, we are only beginning to see the possibilities of NGS platforms, which are developing in parallel with online availability of a wide range of biological data sets and scientific publications and allowing us to address a variety of questions not possible before. As techniques and data sets continue to improve and grow, we are rapidly moving to the point where every organism, not just select "model organisms", is open to the power of NGS. This volume presents a brief synopsis of NGS technologies and the development of exemplary applications of such methods in the fields of molecular marker development, hybridization and introgression, transcriptome investigations, phylogenetic and ecological studies, polyploid genetics, and applications for large genebank collections.

Protein detection by nanopores equipped with aptamers

Protein nanopores have been used as stochastic sensors for the detection of analytes that range from small molecules to proteins. In this approach, individual analyte molecules modulate the ionic current flowing through a single nanopore. Here, a new type of stochastic sensor based on an αHL pore modified with an aptamer is described. The aptamer is bound to the pore by hybridization to an oligonucleotide that is attached covalently through a disulfide bond to a single cysteine residue near a mouth of the pore. We show that the binding of thrombin to a 15-mer DNA aptamer, which forms a cation-stabilized quadruplex, alters the ionic current through the pore. The approach allows the quantification of nanomolar concentrations of thrombin, and provides association and dissociation rate constants and equilibrium dissociation constants for thrombin·aptamer interactions. Aptamer-based nanopores have the potential to be integrated into arrays for the parallel detection of multiple analytes.

DNA origami nanopores

We demonstrate the assembly of functional hybrid nanopores for single molecule sensing by inserting DNA origami structures into solid-state nanopores. In our experiments, single artificial nanopores based on DNA origami are repeatedly inserted in and ejected from solid-state nanopores with diameters around 15 nm. We show that these hybrid nanopores can be employed for the detection of λ-DNA molecules. Our approach paves the way for future development of adaptable single-molecule nanopore sensors based on the combination of solid-state nanopores and DNA self-assembly.