Force probing surfaces of living cells to molecular resolution

Heteroresistance at the single-cell level: adapting to antibiotic stress through a population-based strategy and growth-controlled interphenotypic coordination

Heteroresistance refers to phenotypic heterogeneity of microbial clonal populations under antibiotic stress, and it has been thought to be an allocation of a subset of “resistant” cells for surviving in higher concentrations of antibiotic. The assumption fits the so-called bet-hedging strategy, where a bacterial population “hedges” its “bet” on different phenotypes to be selected by unpredicted environment stresses. To test this hypothesis, we constructed a heteroresistance model by introducing a bla_CTX-M-14 gene (coding for a cephalosporin hydrolase) into a sensitive Escherichia coli strain. We confirmed heteroresistance in this clone and that a subset of the cells expressed more hydrolase and formed more colonies in the presence of ceftriaxone (exhibited stronger “resistance”). However, subsequent single-cell-level investigation by using a microfluidic device showed that a subset of cells with a distinguishable phenotype of slowed growth and intensified hydrolase expression emerged, and they were not positively selected but increased their proportion in the population with ascending antibiotic concentrations. Therefore, heteroresistance—the gradually decreased colony-forming capability in the presence of antibiotic—was a result of a decreased growth rate rather than of selection for resistant cells. Using a mock strain without the resistance gene, we further demonstrated the existence of two nested growth-centric feedback loops that control the expression of the hydrolase and maximize population growth in various antibiotic concentrations. In conclusion, phenotypic heterogeneity is a population-based strategy beneficial for bacterial survival and propagation through task allocation and interphenotypic collaboration, and the growth rate provides a critical control for the expression of stress-related genes and an essential mechanism in responding to environmental stresses.

Heteroresistance is essentially phenotypic heterogeneity, where a population-based strategy is thought to be at work, being assumed to be variable cell-to-cell resistance to be selected under antibiotic stress. Exact mechanisms of heteroresistance and its roles in adaptation to antibiotic stress have yet to be fully understood at the molecular and single-cell levels. In our study, we have not been able to detect any apparent subset of “resistant” cells selected by antibiotics; on the contrary, cell populations differentiate into phenotypic subsets with variable growth statuses and hydrolase expression. The growth rate appears to be sensitive to stress intensity and plays a key role in controlling hydrolase expression at both the bulk population and single-cell levels. We have shown here, for the first time, that phenotypic heterogeneity can be beneficial to a growing bacterial population through task allocation and interphenotypic collaboration other than partitioning cells into different categories of selective advantage.

Exchangeable colloidal AFM probes for the quantification of irreversible and long-term interactions

An original method is presented to study single-colloid interaction with a substrate in liquid environment. Colloids, either in solution or adsorbed on a surface, are fixed by suction against the aperture of a microchanneled atomic force microscopy cantilever. Their adhesion to the substrate is measured, followed by their release via a short overpressure surge. Such colloid exchange procedure allows for 1), the quick variation of differently functionalized colloids within the same experiment; 2), the investigation of long-term interactions by leaving the colloids on a surface for a defined time before detaching them; and 3), the inspection of irreversible interactions. After validation of the method by reproducing literature results obtained with traditional colloidal atomic force microscopy, the serial use of colloids with different surface functionalization was shown on a micropatterned surface. Finally, concanavalin A-coated colloids were allowed to adsorb on human embryonic kidney cells and then detached one by one. The adhesion between cells and colloids was up to 60 nN, whereas individual cells adhered with 20 nN to the glass substrate. A cellular elastic modulus of 0.8 kPa was determined using the attached colloid as indenter.

Nanoscale distribution of CD20 on B-cell lymphoma tumour cells and its potential role in the clinical efficacy of rituximab

Rituximab is an exciting monoclonal antibody drug approved for treating B-cell lymphomas and its target is the CD20 antigen which is expressed on the surface of B cells. In recent years, the variable efficacies of rituximab among different lymphoma patients have become an important clinical issue and urgently need to be solved for further development of antibodies with enhanced efficacies. In this work, atomic force microscopy (AFM) was used to investigate the nanoscale distribution of CD20 on the surface of tumour B cells from lymphoma patients to examine its potential role in the clinical therapeutic effects of rituximab. By performing ROR1 fluorescence labelling (ROR1 is a specific tumour cell surface marker) on the bone marrow cells prepared from B-cell lymphoma patients, the tumour B cells were recognized, and then AFM tips carrying rituximabs via polyethylene glycol crosslinkers were moved to the tumour cells to probe the specific CD20-rituximab interactions. By applying AFM single-molecule force spectroscopy (SMFS) at the local areas (500×500 nm²) on the surface of tumour B cells, the nanoscale distributions of CD20 on the surface of tumour B cells were mapped, visually showing that CD20 distributed heterogeneously on the cell surface. Bone marrow cell samples from three clinical B-cell lymphoma cases were collected to analyze the binding affinity and nanoscale distribution of CD20 on tumour cells. The experimental results showed that CD20 distribution on tumour cells were to some extent related to the clinical therapeutic outcomes while the CD20-rituximab binding forces did not have distinct effects to the clinical outcomes. These results can provide novel insights in understanding the rituximab's clinical efficacies from the nanoscale distribution of CD20 on the tumour cells at single-cell and single-molecule levels.

INSIGHTS IN ENZYME FUNCTIONAL DYNAMICS AND ACTIVITY REGULATION BY SINGLE MOLECULE STUDIES

The advent of advanced single molecule measurements heralded the arrival of a wealth of dynamic information revolutionizing our understanding of protein dynamics and behavior in ways not deducible by conventional bulk assays. They offered the direct observation and quantification of the abundance and life time of multiple states and transient intermediates in the energy landscape that are typically averaged out in non-synchronized ensemble measurements, thus providing unprecedented insights into complex biological processes. Here we survey the current state of the art in single-molecule fluorescence microscopy methodology for studying the mechanism of enzymatic activity and the insights on protein functional dynamics. We will initially discuss the strategies employed to date, their limitations and possible ways to overcome them, and finally how single enzyme kinetics can advance our understanding on mechanisms underlying function and regulation of proteins.

[Formula: see text]Special Issue Comment: This review focuses on functional dynamics of individual enzymes and is related to the review on ion channels by Lu,44 the reviews on mathematical treatment of Flomenbom45 and Sach et al.,46 and review on FRET by Ruedas-Rama et al.41

Investigating biomolecular recognition at the cell surface using atomic force microscopy

Probing the interaction forces that drive biomolecular recognition on cell surfaces is essential for understanding diverse biological processes. Force spectroscopy has been a widely used dynamic analytical technique, allowing measurement of such interactions at the molecular and cellular level. The capabilities of working under near physiological environments, combined with excellent force and lateral resolution make atomic force microscopy (AFM)-based force spectroscopy a powerful approach to measure biomolecular interaction forces not only on non-biological substrates, but also on soft, dynamic cell surfaces. Over the last few years, AFM-based force spectroscopy has provided biophysical insight into how biomolecules on cell surfaces interact with each other and induce relevant biological processes. In this review, we focus on describing the technique of force spectroscopy using the AFM, specifically in the context of probing cell surfaces. We summarize recent progress in understanding the recognition and interactions between macromolecules that may be found at cell surfaces from a force spectroscopy perspective. We further discuss the challenges and future prospects of the application of this versatile technique.

Chemical force microscopy of stimuli-responsive adhesive copolymers

Atomic force microscopy with chemically sensitive tips was used to investigate the hydrophobic and electrostatic interaction forces of a stimuli-responsive adhesive polymer, and their dynamic changes in response to water immersion and salt concentration. Block copolymer-filled coatings were obtained by incorporating an amphiphilic block copolymer containing a polydimethylsiloxane (PDMS) block and a poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) block in a PDMS matrix. Topographic images of fresh samples revealed the presence of nanoscale domains associated with the presence of copolymers, covered by a thin layer of PDMS. Prolonged (30 days) immersion in aqueous solution led to the exposure of the hydrophilic PDMAEMA chains on the surface. Using adhesion force mapping with hydrophobic tips, we showed that fresh samples were uniformly hydrophobic, while aged samples exhibited lower surface hydrophobicity and featured nanoscale hydrophilic copolymer domains. Force mapping with negatively charged tips revealed remarkable salt-dependent force plateau signatures reflecting desorption of polyelectrolyte copolymer chains. These nanoscale experiments show how solvent-induced conformational changes of stimuli-responsive copolymers can be used to modulate surface adhesion.

The grab-and-drop protocol: a novel strategy for membrane protein isolation and reconstitution from single cells

Samples of cell membrane were non-destructively removed from individual, live cells using optically trapped beads, and deposited into a supported lipid bilayer mounted on an S-layer protein-coated substrate.

High ferritin levels have major effects on the morphology of erythrocytes in Alzheimer's disease

Introduction: Unliganded iron both contributes to the pathology of Alzheimer's disease (AD) and also changes the morphology of erythrocytes (RBCs). We tested the hypothesis that these two facts might be linked, i.e., that the RBCs of AD individuals have a variant morphology, that might have diagnostic or prognostic value.

Methods: We included a literature survey of AD and its relationships to the vascular system, followed by a laboratory study. Four different microscopy techniques were used and results statistically compared to analyze trends between high and normal serum ferritin (SF) AD individuals.

Results: Light and scanning electron microscopies showed little difference between the morphologies of RBCs taken from healthy individuals and from normal SF AD individuals. By contrast, there were substantial changes in the morphology of RBCs taken from high SF AD individuals. These differences were also observed using confocal microscopy and as a significantly greater membrane stiffness (measured using force-distance curves).

Conclusion: We argue that high ferritin levels may contribute to an accelerated pathology in AD. Our findings reinforce the importance of (unliganded) iron in AD, and suggest the possibility both of an early diagnosis and some means of treating or slowing down the progress of this disease.

Single-cell force spectroscopy of probiotic bacteria

Single-cell force spectroscopy is a powerful atomic force microscopy modality in which a single living cell is attached to the atomic force microscopy cantilever to quantify the forces that drive cell-cell and cell-substrate interactions. Although various single-cell force spectroscopy protocols are well established for animal cells, application of the method to individual bacterial cells remains challenging, mainly owing to the lack of appropriate methods for the controlled attachment of single live cells on cantilevers. We present a nondestructive protocol for single-bacterial cell force spectroscopy, which combines the use of colloidal probe cantilevers and of a bioinspired polydopamine wet adhesive. Living cells from the probiotic species Lactobacillus plantarum are picked up with a polydopamine-coated colloidal probe, enabling us to quantify the adhesion forces between single bacteria and biotic (lectin monolayer) or abiotic (hydrophobic monolayer) surfaces. These minimally invasive single-cell experiments provide novel, to our knowledge, insight into the specific and nonspecific forces driving the adhesion of L. plantarum, and represent a generic platform for studying the molecular mechanisms of cell adhesion in probiotic and pathogenic bacteria.

Single-cell force spectroscopy of the medically important Staphylococcus epidermidis-Candida albicans interaction

Despite the clinical importance of bacterial-fungal interactions, their molecular details are poorly understood. A hallmark of such medically important interspecies associations is the interaction between the two nosocomial pathogens Staphylococcus aureus and Candida albicans, which can lead to mixed biofilm-associated infections with enhanced antibiotic resistance. Here, we use single-cell force spectroscopy (SCFS) to quantify the forces engaged in bacterial-fungal co-adhesion, focusing on the poorly investigated S. epidermidis-C. albicans interaction. Force curves recorded between single bacterial and fungal germ tubes showed large adhesion forces (~5 nN) with extended rupture lengths (up to 500 nm). By contrast, bacteria poorly adhered to yeast cells, emphasizing the important role of the yeast-to-hyphae transition in mediating adhesion to bacterial cells. Analysis of mutant strains altered in cell wall composition allowed us to distinguish the main fungal components involved in adhesion, i.e. Als proteins and O-mannosylations. We suggest that the measured co-adhesion forces are involved in the formation of mixed biofilms, thus possibly as well in promoting polymicrobial infections. In the future, we anticipate that this SCFS platform will be used in nanomedicine to decipher the molecular mechanisms of a wide variety of pathogen-pathogen interactions and may help in designing novel anti-adhesion agents.

Quantifying the forces driving cell-cell adhesion in a fungal pathogen

Owing to its ability to form biofilms on implanted medical devices, the fungal pathogen Candida albicans causes frequent infections in humans. A hallmark of C. albicans biofilms is the presence of two types of cells, budding yeast cells and growing hyphae, which are bound together and embedded in extracellular matrix material. Although cell-cell adhesion is critical to biofilm formation, architecture, and cohesion, we know little about the fundamental forces behind this interaction. Here, we use single-cell force spectroscopy to quantify the forces engaged in yeast-hyphae adhesion, focusing on the role of Als (agglutinin-like sequence) proteins as prototypes of cell adhesion molecules. We show that adhesion between individual yeast and hyphal cells involves strong, short-range cohesive interactions (1.1 ± 0.2 nN; 86 ± 33 nm) and weak, long-range tether interactions (0.4 ± 0.2 nN; 234 ± 81 nm). Control experiments demonstrate that these interactions originate from cell surface proteins that are specific to C. albicans. Using mutant strains deficient for Als expression, we find that Als3 proteins, primarily expressed on the germ tube, play a key role in establishing strong cohesive adhesion. We suggest a model in which cohesive adhesion during biofilm formation originates from tight hydrophobic interactions between Als tandem repeat domains on adjacent cells. When subjected to force, the two interacting cell surfaces detach, but the cell bodies remain tethered through macromolecular extensions. Our results represent the first direct, noninvasive measurement of adhesion forces between interacting fungal cells and provide novel insights into the molecular origin of the cohesive strength of fungal biofilms.

Imaging and measuring the biophysical properties of Fc gamma receptors on single macrophages using atomic force microscopy

Fc gamma receptors (FcγR), widely expressed on effector cells (e.g., NK cells, macrophages), play an important role in clinical cancer immunotherapy. The binding of FcγRs to the Fc portions of antibodies that are attached to the target cells can activate the antibody-dependent cell-mediated cytotoxicity (ADCC) killing mechanism which leads to the lysis of target cells. In this work, we used atomic force microscopy (AFM) to observe the cellular ultra-structures and measure the biophysical properties (affinity and distribution) of FcγRs on single macrophages in aqueous environments. AFM imaging was used to obtain the topographies of macrophages, revealing the nanoscale cellular fine structures. For molecular interaction recognition, antibody molecules were attached onto AFM tips via a heterobifunctional polyethylene glycol (PEG) crosslinker. With AFM single-molecule force spectroscopy, the binding affinities of FcγRs were quantitatively measured on single macrophages. Adhesion force mapping method was used to localize the FcγRs, revealing the nanoscale distribution of FcγRs on local areas of macrophages. The experimental results can improve our understanding of FcγRs on macrophages; the established approach will facilitate further research on physiological activities involved in antibody-based immunotherapy.

Single-cell force spectroscopy, an emerging tool to quantify cell adhesion to biomaterials

Cell adhesion receptors play a central role in sensing and integrating signals provided by the cellular environment. Thus, understanding adhesive interactions at the cell-biomaterial interface is essential to improve the design of implants that should emulate certain characteristics of the cell's natural environment. Numerous cell adhesion assays have been developed; among these, atomic force microscopy-based single-cell force spectroscopy (AFM-SCFS) provides a versatile tool to quantify cell adhesion at physiological conditions. Here we discuss how AFM-SCFS can be used to quantify the adhesion of living cells to biomaterials and give examples of using AFM-SCFS in tissue engineering and regenerative medicine. We anticipate that in the near future, AFM-SCFS will be established in the biomaterial field as an important technique to quantify cell-biomaterial interactions and thereby will contribute to the optimization of implants, scaffolds, and medical devices.

Correlative nanoscale imaging of actin filaments and their complexes

Actin remodeling is an area of interest in biology in which correlative microscopy can bring a new way to analyze protein complexes at the nanoscale. Advances in EM, X-ray diffraction, fluorescence, and single molecule techniques have provided a wealth of information about the modulation of the F-actin structure and its regulation by actin binding proteins (ABPs). Yet, there are technological limitations of these approaches to achieving quantitative molecular level information on the structural and biophysical changes resulting from ABPs interaction with F-actin. Fundamental questions about the actin structure and dynamics and how these determine the function of ABPs remain unanswered. Specifically, how local and long-range structural and conformational changes result in ABPs induced remodeling of F-actin needs to be addressed at the single filament level. Advanced, sensitive and accurate experimental tools for detailed understanding of ABP-actin interactions are much needed. This article discusses the current understanding of nanoscale structural and mechanical modulation of F-actin by ABPs at the single filament level using several correlative microscopic techniques, focusing mainly on results obtained by Atomic Force Microscopy (AFM) analysis of ABP-actin complexes.

High-speed AFM and applications to biomolecular systems

Directly observing individual protein molecules in action at high spatiotemporal resolution has long been a holy grail for biological science. This is because we long have had to infer how proteins function from the static snapshots of their structures and dynamic behavior of optical makers attached to the molecules. This limitation has recently been removed to a large extent by the materialization of high-speed atomic force microscopy (HS-AFM). HS-AFM allows us to directly visualize the structure dynamics and dynamic processes of biological molecules in physiological solutions, at subsecond to sub-100-ms temporal resolution, without disturbing their function. In fact, dynamically acting molecules such as myosin V walking on an actin filament and bacteriorhodopsin in response to light are successfully visualized. In this review, we first describe theoretical considerations for the highest possible imaging rate of this new microscope, and then highlight recent imaging studies. Finally, the current limitation and future challenges to explore are described.

Single-molecule force spectroscopy of G-protein-coupled receptors

The applicability of single-molecule force spectroscopy (SMFS) to characterize membrane proteins in vitro is developing rapidly and opening a wide range of fascinating possibilities to study how intra- and intermolecular interactions determine their structural stability and functional state. In particular, understanding how molecular interactions contribute to the functional state of G-protein-coupled receptors (GPCRs) is of importance because they mediate most of our physiological responses and act as therapeutic targets for a broad spectrum of diseases. In our review we focus on SMFS to characterize GPCRs embedded in their physiologically relevant membranes and exposed to physiologically relevant conditions. SMFS uses a molecularly sharp stylus to grasp the terminal end of a GPCR and to quickly unfold the receptor while recording interaction forces. The positional accuracy of SMFS localizes these interactions to structural segments of the GPCR whereas the sensitivity of SMFS enables their stabilizing interaction forces to be quantified. To further investigate the kinetic, energetic and mechanical properties of the structural segments, dynamic SMFS (DFS) probes their stability over a wide range of loading rates. These parameters provide insight into the energy landscape that provides information on the structural and functional properties of the GPCRs. Selected highlights exemplify the application of SMFS to characterize inter- and intramolecular interactions, which change the properties of GPCRs in relation to their functional state (e.g., ligand binding), diseased state (e.g., mutation), or lipid environment such as cholesterol.

Deciphering teneurin domains that facilitate cellular recognition, cell-cell adhesion, and neurite outgrowth using atomic force microscopy-based single-cell force spectroscopy

Teneurins are evolutionarily conserved transmembrane receptors that function as axon guidance and target selection molecules in the developing nervous system. How teneurins recognize each other, whether they establish neuronal adhesion, and which teneurin specific interactions guide neurons remains to be determined. To reveal insight into these pertinent questions we combine atomic force microscopy-based single-cell force spectroscopy with genetic engineering and quantify the interactions teneurins establish between animal cells. Using a combinatorial approach of deletions and swaps of teneurin-1 and teneurin-2 domains, we unravel that teneurins use their NHL (NCL-1, HT2A, and Lin-41) domain to select homophilic teneurins from adjacent cells. This homophilic recognition of teneurins initiates cell-cell adhesion that, dependent on the intracellular domain, strengthens over time. Neurite outgrowth assays show that establishing and strengthening of teneurin-mediated homophilic cell-cell adhesion is required to stop outgrowth. On the basis of the results, we introduce a molecular model of teneurin domains that specify cellular recognition, adhesion strengthening, and neuronal pathfinding. The combined force spectroscopy and genetic approach can be applied to quantitatively decipher the contribution of any neuronal receptor domain and more generally of a given cell surface receptor domain to cell-cell recognition and adhesion.

Force nanoscopy of cell mechanics and cell adhesion

Cells are constantly exposed to mechanical stimuli in their environment and have several evolved mechanisms to sense and respond to these cues. It is becoming increasingly recognized that many cell types, from bacteria to mammalian cells, possess a diverse set of proteins to translate mechanical cues into biochemical signalling and to mediate cell surface interactions such as cell adhesion. Moreover, the mechanical properties of cells are involved in regulating cell function as well as serving as indicators of disease states. Importantly, the recent development of biophysical tools and nanoscale methods has facilitated a deeper understanding of the role that physical forces play in modulating cell mechanics and cell adhesion. Here, we discuss how atomic force microscopy (AFM) has recently been used to investigate cell mechanics and cell adhesion at the single-cell and single-molecule levels. This knowledge is critical to our understanding of the molecular mechanisms that govern mechanosensing, mechanotransduction, and mechanoresponse in living cells. While pushing living cells with the AFM tip provides a means to quantify their mechanical properties and examine their response to nanoscale forces, pulling single surface proteins with a functionalized tip allows one to understand their role in sensing and adhesion. The combination of these nanoscale techniques with modern molecular biology approaches, genetic engineering and optical microscopies provides a powerful platform for understanding the sophisticated functions of the cell surface machinery, and its role in the onset and progression of complex diseases.

B cells use mechanical energy to discriminate antigen affinities

The generation of high-affinity antibodies depends on the ability of B cells to extract antigens from the surfaces of antigen-presenting cells. B cells that express high-affinity B cell receptors (BCRs) acquire more antigen and obtain better T cell help. However, the mechanisms by which B cells extract antigen remain unclear. Using fluid and flexible membrane substrates to mimic antigen-presenting cells, we showed that B cells acquire antigen by dynamic myosin IIa-mediated contractions that pull out and invaginate the presenting membranes. The forces generated by myosin IIa contractions ruptured most individual BCR-antigen bonds and promoted internalization of only high-affinity, multivalent BCR microclusters. Thus, B cell contractility contributes to affinity discrimination by mechanically testing the strength of antigen binding.

Adhesion and nanomechanics of pili from the probiotic Lactobacillus rhamnosus GG

Knowledge of the mechanisms by which bacterial pili adhere to host cells and withstand external forces is critical to our understanding of their functional roles and offers exciting avenues in biomedicine for controlling the adhesion of bacterial pathogens and probiotics. While much progress has been made in the nanoscale characterization of pili from Gram-negative bacteria, the adhesive and mechanical properties of Gram-positive bacterial pili remain largely unknown. Here, we use single-molecule atomic force microscopy to unravel the binding mechanism of pili from the probiotic Gram-positive bacterium Lactobacillus rhamnosus GG (LGG). First, we show that SpaC, the key adhesion protein of the LGG pilus, is a multifunctional adhesin with broad specificity. SpaC forms homophilic trans-interactions engaged in bacterial aggregation and specifically binds mucin and collagen, two major extracellular components of host epithelial layers. Homophilic and heterophilic interactions display similar binding strengths and dissociation rates. Next, pulling experiments on living bacteria demonstrate that LGG pili exhibit two unique mechanical responses, that is, zipper-like adhesion involving multiple SpaC molecules distributed along the pilus length and nanospring properties enabling pili to resist high force. These mechanical properties may represent a generic mechanism among Gram-positive bacterial pili for strengthening adhesion and withstanding shear stresses in the natural environment. The single-molecule experiments presented here may help us to design molecules capable of promoting or inhibiting bacterial-host interactions.

Inhibition of fibroblast adhesion by covalently immobilized protein repellent polymer coatings studied by single cell force spectroscopy

Cochlea implants (CI) restore the hearing in patients with sensorineural hearing loss by electrical stimulation of the auditory nerve via an electrode array. The increase of the impedance at the electrode-tissue interface due to a postoperative connective tissue encapsulation leads to higher power consumption of the implants. Therefore, reduced adhesion and proliferation of connective tissue cells around the CI electrode array is of great clinical interest. The adhesion of cells to substrate surfaces is mediated by extracellular matrix (ECM) proteins. Protein repellent polymers (PRP) are able to inhibit unspecific protein adsorption. Thus, a reduction of cell adhesion might be achieved by coating the electrode carriers with PRPs. The aim of this study was to investigate the effects of two different PRPs, poly(dimethylacrylamide) (PDMAA) and poly(2-ethyloxazoline) (PEtOx), on the strength and the temporal dynamics of the initial adhesion of fibroblasts. Polymers were immobilized onto glass plates by a photochemical grafting onto method. Water contact angle measurements proved hydrophilic surface properties of both PDMAA and PEtOx (45 ± 1° and 44 ± 1°, respectively). The adhesion strength of NIH3T3 fibroblasts after 5, 30, and 180 s of interaction with surfaces was investigated by using single cell force spectroscopy. In comparison to glass surfaces, both polymers reduced the adhesion of fibroblasts significantly at all different interaction times and lower dynamic rates of adhesion were observed. Thus, both PDMAA and PEtOx represented antiadhesive properties and can be used as implant coatings to reduce the unspecific ECM-mediated adhesion of fibroblasts to surfaces.

Nanomechanical properties of proteins and membranes depend on loading rate and electrostatic interactions

Knowing the dynamic mechanical response of tissue, cells, membranes, proteins, nucleic acids, and carbohydrates to external perturbations is important to understand various biological and biotechnological problems. Atomic force microscopy (AFM)-based approaches are the most frequently used nanotechnologies to determine the mechanical properties of biological samples that range in size from microscopic to (sub)nanoscopic. However, the dynamic nature of biomechanical properties has barely been addressed by AFM imaging. In this work, we characterizethe viscoelastic properties of the native light-driven proton pump bacteriorhodopsin of the purple membrane of Halobacterium salinarum. Using force-distance curve (F-D)-based AFM we imaged purple membranes while force probing their mechanical response over a wide range of loading rates (from ∼0.5 to 100 μN/s). Our results show that the mechanical stiffness of protein and membrane increases with the loading rate up to a factor of 10 (from ∼0.3 to 3.2 N/m). In addition, the electrostatic repulsion between AFM tip and sample can alter the mechanical stiffness measured by AFM up to ∼60% (from ∼0.8 to 1.3 N/m).These findings indicate that the mechanical response of membranes and proteins and probably of other biomolecular systems should be determined at different loading rates to fully understand their properties.

Characterizing pilus-mediated adhesion of biofilm-forming E. coli to chemically diverse surfaces using atomic force microscopy

Biofilms are complex communities of microorganisms living together at an interface. Because biofilms are often associated with contamination and infection, it is critical to understand how bacterial cells adhere to surfaces in the early stages of biofilm formation. Even harmless commensal Escherichia coli naturally forms biofilms in the human digestive tract by adhering to epithelial cells, a trait that presents major concerns in the case of pathogenic E. coli strains. The laboratory strain E. coli ZK1056 provides an intriguing model system for pathogenic E. coli strains because it forms biofilms robustly on a wide range of surfaces.E. coli ZK1056 cells spontaneously form living biofilms on polylysine-coated AFM cantilevers, allowing us to measure quantitatively by AFM the adhesion between native biofilm cells and substrates of our choice. We use these biofilm-covered cantilevers to probe E. coli ZK1056 adhesion to five substrates with distinct and well-characterized surface chemistries, including fluorinated, amine-terminated, and PEG-like monolayers, as well as unmodified silicon wafer and mica. Notably, after only 0-10 s of contact time, the biofilms adhere strongly to fluorinated and amine-terminated monolayers as well as to mica and weakly to "antifouling" PEG monolayers, despite the wide variation in hydrophobicity and charge of these substrates. In each case the AFM retraction curves display distinct adhesion profiles in terms of both force and distance, highlighting the cells' ability to adapt their adhesive properties to disparate surfaces. Specific inhibition of the pilus protein FimH by a nonhydrolyzable mannose analogue leads to diminished adhesion in all cases, demonstrating the critical role of type I pili in adhesion by this strain to surfaces bearing widely different functional groups. The strong and adaptable binding of FimH to diverse surfaces has unexpected implications for the design of antifouling surfaces and antiadhesion therapies.

Loss of electrostatic cell-surface repulsion mediates myelin membrane adhesion and compaction in the central nervous system

During the development of the central nervous system (CNS), oligodendrocytes wrap their plasma membrane around axons to form a multilayered stack of tightly attached membranes. Although intracellular myelin compaction and the role of myelin basic protein has been investigated, the forces that mediate the close interaction of myelin membranes at their external surfaces are poorly understood. Such extensive bilayer-bilayer interactions are usually prevented by repulsive forces generated by the glycocalyx, a dense and confluent layer of large and negatively charged oligosaccharides. Here we investigate the molecular mechanisms underlying myelin adhesion and compaction in the CNS. We revisit the role of the proteolipid protein and analyze the contribution of oligosaccharides using cellular assays, biophysical tools, and transgenic mice. We observe that differentiation of oligodendrocytes is accompanied by a striking down-regulation of components of their glycocalyx. Both in vitro and in vivo experiments indicate that the adhesive properties of the proteolipid protein, along with the reduction of sialic acid residues from the cell surface, orchestrate myelin membrane adhesion and compaction in the CNS. We suggest that loss of electrostatic cell-surface repulsion uncovers weak and unspecific attractive forces in the bilayer that bring the extracellular surfaces of a membrane into close contact over long distances.

High-speed atomic force microscopy

High-speed atomic force microscopy (HS-AFM) has been developed as a nano-dynamics visualization technique. This microscopy permits direct observation of structure dynamics and dynamic processes of biological molecules in physiological solutions, at a subsecond to sub-100 ms temporal resolution and an ∼2 nm lateral and a 0.1 nm vertical resolution. Importantly, tip-sample interactions do not disturb the biomolecules' functions. Various functioning proteins including myosin V walking on an actin filament and bacteriorhodopsin responding to light have been successfully visualized with HS-AFM. In the quest for understanding the functional mechanisms of proteins, inferences no longer have to be made from static snapshots of molecular structures and dynamic behavior of optical markers attached to proteins. High-resolution molecular movies obtained from HS-AFM observations reveal the details of molecules' dynamic behavior in action, without the need for intricate analyses and interpretations. In this review, I first describe the fundamentals behind the achieved high imaging rate and low invasiveness to samples, and then highlight recent imaging studies. Finally, future studies are briefly described.

Imaging and measuring the molecular force of lymphoma pathological cells using atomic force microscopy

Atomic force microscopy (AFM) provides a new technology to visualize the cellular topography and quantify the molecular interactions at nanometer spatial resolution. In this work, AFM was used to image the cellular topography and measure the molecular force of pathological cells from B-cell lymphoma patients. After the fluorescence staining, cancer cells were recognized by their special morphological features and then the detailed topography was visualized by AFM imaging. The AFM images showed that cancer cells were much rougher than healthy cells. CD20 is a surface marker of B cells and rituximab is a monoclonal antibody against CD20. To measure the CD20-rituximab interaction forces, the polyethylene glycol (PEG) linker was used to link rituximab onto the AFM tip and the verification experiments of the functionalized probe indicated that rituximab molecules were successfully linked onto the AFM tip. The CD20-rituximab interaction forces were measured on about 20 pathological cells and the force measurement results indicated the CD20-rituximab binding forces were mainly in the range of 110-120 pN and 130-140 pN. These results can improve our understanding of the topography and molecular force of lymphoma pathological cells.

The scanning ion conductance microscope for cellular physiology

The quest for nonoptical imaging methods that can surmount light diffraction limits resulted in the development of scanning probe microscopes. However, most of the existing methods are not quite suitable for studying biological samples. The scanning ion conductance microscope (SICM) bridges the gap between the resolution capabilities of atomic force microscope and scanning electron microscope and functional capabilities of conventional light microscope. A nanopipette mounted on a three-axis piezo-actuator, scans a sample of interest and ion current is measured between the pipette tip and the sample. The feedback control system always keeps a certain distance between the sample and the pipette so the pipette never touches the sample. At the same time pipette movement is recorded and this generates a three-dimensional topographical image of the sample surface. SICM represents an alternative to conventional high-resolution microscopy, especially in imaging topography of live biological samples. In addition, the nanopipette probe provides a host of added modalities, for example using the same pipette and feedback control for efficient approach and seal with the cell membrane for ion channel recording. SICM can be combined in one instrument with optical and fluorescent methods and allows drawing structure-function correlations. It can also be used for precise mechanical force measurements as well as vehicle to apply pressure with precision. This can be done on living cells and tissues for prolonged periods of time without them loosing viability. The SICM is a multifunctional instrument, and it is maturing rapidly and will open even more possibilities in the near future.

High-resolution imaging of 2D outer membrane protein F crystals by atomic force microscopy

In this chapter the methodological bases are provided to achieve subnanometer resolution on two-dimensional (2D) membrane protein crystals by atomic force microscopy (AFM). This is outlined in detail with the example of AFM studies of the outer membrane protein F (OmpF) from the bacterium Escherichia coli (E. coli). We describe in detail the high-resolution imaging of 2D OmpF crystals in aqueous solution and under near-physiological conditions. The topographs of OmpF, and stylus effects and artifacts encountered when imaging by AFM are discussed.

Single-molecule imaging and functional analysis of Als adhesins and mannans during Candida albicans morphogenesis

Cellular morphogenesis in the fungal pathogen Candida albicans is associated with changes in cell wall composition that play important roles in biofilm formation and immune responses. Yet, how fungal morphogenesis modulates the biophysical properties and interactions of the cell surface molecules is poorly understood, mainly owing to the paucity of high-resolution imaging techniques. Here, we use single-molecule atomic force microscopy to localize and analyze the key components of the surface of living C. albicans cells during morphogenesis. We show that the yeast-to-hypha transition leads to a major increase in the distribution, adhesion, unfolding, and extension of Als adhesins and their associated mannans on the cell surface. We also find that morphogenesis dramatically increases cell surface hydrophobicity. These molecular changes are critical for microbe-host interactions, including adhesion, colonization, and biofilm formation. The single-molecule experiments presented here offer promising prospects for understanding how microbial pathogens use cell surface molecules to modulate biofilm and immune interactions.

Rapid and serial quantification of adhesion forces of yeast and Mammalian cells

Cell adhesion to surfaces represents the basis for niche colonization and survival. Here we establish serial quantification of adhesion forces of different cell types using a single probe. The pace of single-cell force-spectroscopy was accelerated to up to 200 yeast and 20 mammalian cells per probe when replacing the conventional cell trapping cantilever chemistry of atomic force microscopy by underpressure immobilization with fluidic force microscopy (FluidFM). In consequence, statistically relevant data could be recorded in a rapid manner, the spectrum of examinable cells was enlarged, and the cell physiology preserved until approached for force spectroscopy. Adhesion forces of Candida albicans increased from below 4 up to 16 nN at 37°C on hydrophobic surfaces, whereas a Δhgc1-mutant showed forces consistently below 4 nN. Monitoring adhesion of mammalian cells revealed mean adhesion forces of 600 nN of HeLa cells on fibronectin and were one order of magnitude higher than those observed for HEK cells.

Single-cell force spectroscopy: mechanical insights into the functional impacts of interactions between antigen-presenting cells and T cells

Antigen recognition and discrimination by T lymphocyte are essential in initiating appropriate immune responses. The mechanisms underlying exquisite sensitivity and specificity of antigen discrimination are not fully elucidated but involved physical intercellular interactions between T cell and antigen-presenting cell (APC). The specificity of T-cell activation is tightly regulated by T-cell receptor (TCR) recognition of antigenic peptides in complex with major histocompatibility complex (pMHC) glycoproteins on the cell surface of APC. Antigen recognition via TCR/pMHC interactions, together with other co-receptors and co-stimulatory molecules, are spatially organized into the two-dimensional contact zone between T cells and APC, resulting in the formation of an immune synapse (IS). Here, we will review current implementations and applications of a cutting-edge biophysical technique, namely single-cell force spectroscopy (SCFS) that allows us to quantify mechanical forces of IS at APC/T cell-cell contact. The functional impacts of the mechanical strength in regulating T-cell functional activity will be discussed. We will also describe limitations of SCFS techniques, and outline recent investigations focusing on the functional roles of IS as mechanotransducer in regulating T-cell activities.

Topography of native SK channels revealed by force nanoscopy in living neurons

The spatial distribution of ion channels is an important determinant of neuronal excitability. However, there are currently no quantitative techniques to map endogenous ion channels with single-channel resolution in living cells. Here, we demonstrate that integration of pharmacology with single-molecule atomic force microscopy (AFM) allows for the high-resolution mapping of native potassium channels in living neurons. We focus on calcium-activated small conductance (SK) potassium channels, which play a critical role in brain physiology. By linking apamin, a toxin that specifically binds to SK channels, to the tip of an AFM cantilever, we are able to detect binding events between the apamin and SK channels. We find that native SK channels from rat hippocampal neurons reside primarily in dendrites as single entities and in pairs. We also show that SK channel dendritic distribution is dynamic and under the control of protein kinase A. Our study demonstrates that integration of toxin pharmacology with single-molecule AFM can be used to quantitatively map individual native ion channels in living cells, and thus provides a new tool for the study of ion channels in cellular physiology.

Atomic force microscopy - looking at mechanosensors on the cell surface

Living cells use cell surface proteins, such as mechanosensors, to constantly sense and respond to their environment. However, the way in which these proteins respond to mechanical stimuli and assemble into large complexes remains poorly understood at the molecular level. In the past years, atomic force microscopy (AFM) has revolutionized the way in which biologists analyze cell surface proteins to molecular resolution. In this Commentary, we discuss how the powerful set of advanced AFM techniques (e.g. live-cell imaging and single-molecule manipulation) can be integrated with the modern tools of molecular genetics (i.e. protein design) to study the localization and molecular elasticity of individual mechanosensors on the surface of living cells. Although we emphasize recent studies on cell surface proteins from yeasts, the techniques described are applicable to surface proteins from virtually all organisms, from bacteria to human cells.

Direct quantitative analysis of HCV RNA by atomic force microscopy without labeling or amplification

Force-based atomic force microscopy (AFM) was used to detect HCV (hepatitis C virus) RNA directly and to quantitatively analyse it without the need for reverse transcription or amplification. Capture and detection DNA probes were designed. The former was spotted onto a substrate with a conventional microarrayer, and the latter was immobilized on an AFM probe. To control the spacing between the immobilized DNAs on the surface, dendron self-assembly was employed. Force-distance curves showed that the mean force of the specific unbinding events was 32 ± 5 pN, and the hydrodynamic distance of the captured RNA was 30-60 nm. Adhesion force maps were generated with criteria including the mean force value, probability of obtaining the specific curves and hydrodynamic distance. The maps for the samples whose concentrations ranged from 0.76 fM to 6.0 fM showed that cluster number has a linear relationship with RNA concentration, while the difference between the observed number and the calculated one increased at low concentrations. Because the detection limit is expected to be enhanced by a factor of 10 000 when a spot of 1 micron diameter is employed, it is believed that HCV RNA of a few copy numbers can be detected by the use of AFM.

Living cell study at the single-molecule and single-cell levels by atomic force microscopy

Atomic force microscopy (AFM) has been emerging as a multifunctional molecular tool in nanobiology and nanomedicine. This review summarizes the recent advances in AFM study of living mammalian cells at the single-molecule and single-cell levels. Besides nanoscale imaging of cell membrane structure, AFM-based force measurements on living cells are mainly discussed. These include the development and application of single-molecule force spectroscopy to investigate ligand–receptor binding strength and dissociation dynamics, and the characterization of cell mechanical properties in a physiological environment. Molecular manipulation of cells by AFM to change the cellular process is also described. Living-cell AFM study offers a new approach to understand the molecular mechanisms of cell function, disease development and drug effect, as well as to develop new strategies to achieve single-cell-based diagnosis.

Evaluation of single-cell force spectroscopy and fluorescence microscopy to determine cell interactions with femtosecond-laser microstructured titanium surfaces

One goal in biomaterials research is to limit the formation of connective tissue around the implant. Antiwetting surfaces are known to reduce ability of cells to adhere. Such surfaces can be achieved by special surface structures (lotus effect). Aim of the study was to investigate the feasibility for creating antiwetting surface structures on titanium and to characterize their effect on initial cell adhesion and proliferation. Titanium microstructures were generated using femtosecond- (fs-) laser pulses. Murine fibroblasts served as a model for connective tissue cells. Quantitative investigation of initial cell adhesion was performed using atomic force microscopy. Fluorescence microscopy was used for the characterization of cell-adhesion pattern, cell morphology, and proliferation. Water contact angle (WCA) measurements evinced antiwetting properties of laser-structured surfaces. However, the WCA was decreased in serum-containing medium. Initial cell adhesion to microstructured titanium was significantly promoted when compared with polished titanium. Microstructures did not influence cell proliferation on titanium surfaces. However, on titanium microstructures, cells showed a flattened morphology, and the cell orientation was biased according to the surface topography. In conclusion, antiwetting properties of surfaces were absent in the presence of serum and did not hinder adhesion and proliferation of NIH 3T3 fibroblasts.

Nanoscale analysis of the effects of antibiotics and CX1 on a Pseudomonas aeruginosa multidrug-resistant strain

Drug resistance is a challenge that can be addressed using nanotechnology. We focused on the resistance of the bacteria Pseudomonas aeruginosa and investigated, using Atomic Force Microscopy (AFM), the behavior of a reference strain and of a multidrug resistant clinical strain, submitted to two antibiotics and to an innovative antibacterial drug (CX1). We measured the morphology, surface roughness and elasticity of the bacteria under physiological conditions and exposed to the antibacterial molecules. To go further in the molecules action mechanism, we explored the bacterial cell wall nanoscale organization using functionalized AFM tips. We have demonstrated that affected cells have a molecularly disorganized cell wall; surprisingly long molecules being pulled off from the cell wall by a lectin probe. Finally, we have elucidated the mechanism of action of CX1: it destroys the outer membrane of the bacteria as demonstrated by the results on artificial phospholipidic membranes and on the resistant strain.