Reversed thermo-switchable molecular sieving membranes composed of two-dimensional metal-organic nanosheets for gas separation

Ultrathin Metal-Organic Framework Nanosheets as a Gutter Layer for Flexible Composite Gas Separation Membranes

Ultrathin metal-organic framework (MOF) nanosheets show great potential in various separation applications. In this study, MOF nanosheets are incorporated as a gutter layer in high-performance, flexible thin-film composite membranes (TFCMs) for CO₂ separation. Ultrathin MOF nanosheets (∼3-4 nm) were prepared via a surfactant-assisted method and subsequently coated onto a flexible porous support by vacuum filtration. This produced an ultrathin (∼25 nm), extremely flat MOF layer, which serves as a highly permeable gutter with reduced gas resistance when compared with conventional polydimethylsiloxane gutter layers. Subsequent spin-coating of the ultrathin MOF gutter layer with a polymeric selective layer (Polyactive) afforded a TFCM exhibiting the best CO₂ separation performance yet reported for a flexible composite membrane (CO₂ permeance of ∼2100 GPU with a CO₂/N₂ ideal selectivity of ∼30). Several unique MOF nanosheets were examined as gutter layers, each differing with regard to structure and thickness (∼10 and ∼80 nm), with results indicating that flexibility in the ultrathin MOF layer is critical for optimized membrane performance. The inclusion of ultrathin MOF nanosheets into next-generation TFCMs has the potential for major improvements in gas separation performance over current composite membrane designs.

Advanced Porous Materials in Mixed Matrix Membranes

Membrane technology has gained great interest in industrial separation processing over the past few decades owing to its high energy efficiency, small capital investment, environmentally benign characteristics, and the continuous operation process. Among various types of membranes, mixed matrix membranes (MMMs) combining the merits of the polymer matrix and inorganic/organic fillers have been extensively investigated. With the rapid development of chemistry and materials science, recent studies have shifted toward the design and application of advanced porous materials as promising fillers to boost the separation performance of MMMs. Here, first a comprehensive overview is provided on the choices of advanced porous materials recently adopted in MMMs, including metal-organic frameworks, porous organic frameworks, and porous molecular compounds. Novel trends in MMMs induced by these advanced porous fillers are discussed in detail, followed by a summary of applying these MMMs for gas and liquid separations. Finally, a concise conclusion and current challenges toward the industrial implementation of MMMs are outlined, hoping to provide guidance for the design of high-performance membranes to meet the urgent needs of clean energy and environmental sustainability.

Ultralarge Single-Layer Porous Protein Nanosheet for Precise Nanosize Separation

Highly permeable and precisely size-selective membranes are the subject of continuous pursuit for energy-efficient separation of fine chemicals. However, challenges remain in the fabrication of an ultrathin selective layer with homogeneous pores, in particular, with the pore sizes in the 1-10 nm range. We report the design of a free-standing porous nanosheet assembled with a single layer of proteins. Tobacco mosaic virus mutant (TMVm), a cylinder-shaped protein containing an inner pore of 4 nm in diameter, was cross-linked via a Cu²⁺-catalyzed disulfide-bond-forming reaction along the 2D orientation. By such a design, ultralarge single-layer TMVm nanosheets extending over tens of micrometers in width and with well-defined nanopores were successfully developed. A ∼40 nm thick ultrafiltration membrane laminated by the single-layer TMVm nanosheets through simple vacuum filtration accomplished the precise separation of ∼4 nm sized substances. Meanwhile, the membrane exhibited water permeance up to ∼7000 L m^-2 h^-1 bar^-1, which is an order of magnitude improvement compared with traditional ultrafiltration membranes with a similar rejection profile.

Micropatterned Ultrathin MOF Membranes with Enhanced Molecular Sieving Property

Metal-organic frameworks (MOFs) are attractive crystalline materials for membranes due to their diverse crystalline pore structures and molecular separation properties. However, the fabrication cost is relatively high compared to conventional polymeric membranes. The concern of the cost could be eased if they are part of a value-added device, for example, as the key separation unit in a lab-on-a-chip device. This study demonstrates the feasibility of miniaturization of MOF membranes by patterning the membrane surface, a necessary step for MOF membranes to be used in compact devices. Water-stable ultrathin UiO-66 membranes with a thickness down to 250 nm on a substrate with a complex pattern were grown. The patterned membranes showed a 100 % improvement in the apparent permeation flux over conventional flat-UiO-66 membranes without compromising the molecular separation property, indicating the complexity of a surface would not be a formidable obstacle to the MOF membrane fabrication.

Metal-Organic Frameworks for Separation

Separation is an important industrial step with critical roles in the chemical, petrochemical, pharmaceutical, and nuclear industries, as well as in many other fields. Although much progress has been made, the development of better separation technologies, especially through the discovery of high-performance separation materials, continues to attract increasing interest due to concerns over factors such as efficiency, health and environmental impacts, and the cost of existing methods. Metal-organic frameworks (MOFs), a rapidly expanding family of crystalline porous materials, have shown great promise to address various separation challenges due to their well-defined pore size and unprecedented tunability in both composition and pore geometry. In the past decade, extensive research is performed on applications of MOF materials, including separation and capture of many gases and vapors, and liquid-phase separation involving both liquid mixtures and solutions. MOFs also bring new opportunities in enantioselective separation and are amenable to morphological control such as fabrication of membranes for enhanced separation outcomes. Here, some of the latest progress in the applications of MOFs for several key separation issues, with emphasis on newly synthesized MOF materials and the impact of their compositional and structural features on separation properties, are reviewed and highlighted.

Facile manufacture of porous organic framework membranes for precombustion CO2 capture

The development of new membranes with high H₂ separation performance under industrially relevant conditions (high temperatures and pressures) is of primary importance. For instance, these membranes may facilitate the implementation of energy-efficient precombustion CO₂ capture or reduce energy intensity in other industrial processes such as ammonia synthesis. We report a facile synthetic protocol based on interfacial polymerization for the fabrication of supported benzimidazole-linked polymer membranes that display an unprecedented H₂/CO₂ selectivity (up to 40) at 423 K together with high-pressure resistance and long-term stability (>800 hours in the presence of water vapor).

Electron tomography reveals details of the internal microstructure of desalination membranes

As water availability becomes a growing challenge in various regions throughout the world, desalination and wastewater reclamation through technologies such as reverse osmosis (RO) are becoming more important. Nevertheless, many open questions remain regarding the internal structure of thin-film composite RO membranes. In this work, fully aromatic polyamide films that serve as the active layer of state-of-the-art water filtration membranes were investigated using high-angle annular dark-field scanning transmission electron microscopy tomography. Reconstructions of the 3D morphology reveal intricate aspects of the complex microstructure not visible from 2D projections. We find that internal voids of the active layer of compressed commercial membranes account for less than 0.2% of the total polymer volume, contrary to previously reported values that are two orders of magnitude higher. Measurements of the local variation in polyamide density from electron tomography reveal that the polymer density is highest at the permeable surface for the two membranes tested and establish the significance of surface area on RO membrane transport properties. The same type of analyses could provide explanations for different flux variations with surface area for other types of membranes where the density is distributed differently. Thus, 3D reconstructions and quantitative analyses will be crucial to characterize the complex morphology of polymeric membranes used in next-generation water-purification membranes.

Reversibly Switching Molecular Spectra

Manipulation of light transmission/absorbance and reflection/emission has a great significance in smart windows and displaying media like liquid crystal. Here, we report the usage of an external electric field to reversibly switch the molecular spectra of a model molecule on the basis of its interaction with an electroresponsible polymer brush. Both the UV-vis absorbance spectrum and the fluorescence emission spectrum of the model molecule were confirmed to be electroswitchable. The electroswitchable spectra were experimentally demonstrated to be induced by the electroswitchable statuses of medium anionic poly-allyloxy hydroxypropyl sulfonate (poly-AHPS) brush. Insightfully, the molecular aggregated status of model proflavine molecules could be electrically controlled via the electroresponsible poly-AHPS brushes and then the molecular spectra of the model proflavine molecule also could be electrically and controllably shifted. The success in the manipulation of molecular spectra opens up a wide range of applications not only for displaying but also for nonlinear optics, in vivo imaging, sensors, and environmental inspection.

Tailoring exciton and excimer emission in an exfoliated ultrathin 2D metal-organic framework

Two-dimensional (2D) metal-organic frameworks have exhibited a range of fascinating attributes, of interest to numerous fields. Here, a calcium-based metal-organic framework with a 2D layered structure has been designed. Dual emissions relating to intralayer excimers and interlayer trapped excitons are produced, showing excitation-dependent shifting tendency, characteristic of a low dimensional semiconductor nature. Furthermore, the layer stacking by weak van der Waals forces among dynamically coordinated DMF molecules enables exfoliation and morphology transformation, which can be achieved by ultrasound in different ratios of DMF/H₂O solvents, or grinding under appropriate humidity conditions, leading to nano samples including ultrathin nanosheets with single or few coordination layers. The cutting down of layer numbers engenders suppression of interlayer exciton-related emission, resulting in modulation of the overall emitting color and optical memory states. This provides a rare prototypical model with switchable dual-channel emissions based on 2D-MOFs, in which the interlayer excitation channel can be reversibly tuned on/off by top-down exfoliation and morphology transformation.

Two-dimensional porous cuprous oxide nanoplatelets derived from metal-organic frameworks (MOFs) for efficient photocatalytic dye degradation under visible light

Bottom-up synthesis is a promising method to design and control the morphology of metal-organic frameworks (MOFs). Here, square shaped two-dimensional (2D) MOF nanoplatelets with a thickness of ∼80 nm and a lateral dimension of 4-6 μm were successfully synthesized through a facile solvothermal treatment of Cu(NO3)2 and 4,4'-bipyridine in the presence of polyvinyl pyrrolidone (PVP). The growth of a cross-weaved structure assembled via 1D chains linked with 4,4'-bipyridine along the layer stacking direction was hindered by PVP, resulting in a high-aspect ratio of the nanoplatelets. Subsequent annealing treatment converted the Cu-based MOFs into porous N-doped Cu2O/carbon composites, retaining the 2D square morphology. This annealed product showed a higher performance in the degradation of methyl orange under visible light compared to previously reported Cu2O composites. By using a small amount of the catalyst, the degradation rate could reach up to 2.5 mg min-1 gcat-1 as a result of the efficient absorption of visible light and high surface area of the porous catalysts.

An Unprecedented Stimuli-Controlled Single-Crystal Reversible Phase Transition of a Metal-Organic Framework and Its Application to a Novel Method of Guest Encapsulation

The flexibility and unexpected dynamic behavior of a third-generation metal-organic framework are described for the first time. The synthetic strategy is based on the flexibility and spherical shape of dipyridyl-based carborane linkers that act as pillars between rigid Co/BTB (BTB: 1,3,5-benzenetricarboxylate) layers, providing a 3D porous structure (1). A phase transition of the solid can be induced to generate a new, nonporous 2D structure (2) without any loss of the carborane linkers. The structural transformation is visualized by snapshots of the multistep single-crystal-to-single-crystal transformation by single-crystal and powder X-ray diffraction. Poor hydrogen bond acceptors such as MeOH, CHCl3 or supercritical CO2 induce such a 3D to 2D transformation. Remarkably, the transformation is reversible and the 2D phase 2 is further converted back into 1 by heating in dimethylformamide. The energy requirements involved in such processes are investigated using periodic density functional theory calculations. As a proof of concept for potential applications, encapsulation of C60 is achieved by trapping this molecule during the reversible 2D to 3D phase transition, whereas no adsorption is observed by straight solvent diffusion into the pores of the 3D phase.

GO-guided direct growth of highly oriented metal-organic framework nanosheet membranes for H2/CO2 separation

A highly oriented 2D nanosheet metal–organic framework membrane is fabricated by a direct growth strategy.

Highly oriented, ultrathin metal–organic framework (MOF) membranes are attractive for practical separation applications, but the scalable preparation of such membranes especially on standard tubular supports remains a huge challenge. Here we report a novel bottom-up strategy for directly growing a highly oriented Zn₂(bIm)₄ (bIm = benzimidazole) ZIF nanosheet tubular membrane, based on graphene oxide (GO) guided self-conversion of ZnO nanoparticles (NPs). Through our approach, a thin layer of ZnO NPs confined between a substrate and a GO ultrathin layer self-converts into a highly oriented Zn₂(bIm)₄ nanosheet membrane. The resulting membrane with a thickness of around 200 nm demonstrates excellent H₂/CO₂ gas separation performance with a H₂ performance of 1.4 × 10^–7 mol m^–2 s^–1 Pa^–1 and an ideal separation selectivity of about 106. The method can be easily scaled up and extended to the synthesis of other types of Zn-based MOF nanosheet membranes. Importantly, our strategy is particularly suitable for the large-scale fabrication of tubular MOF membranes that has not been possible through other methods.

A Highly Solvent-Stable Metal-Organic Framework Nanosheet: Morphology Control, Exfoliation, and Luminescent Property

Compared to bulk metal-organic framework (MOF), 2D MOF nanosheets have gained intensive research attention due to their ultrathin thickness and large surface area with highly accessible active sites. However, structural deterioration and morphological damage have impeded producing high-quality MOF nanosheets during exfoliation. Here, first a new layered bulk MOF ZSB-1 is synthesized and several solvents such as isopropanol, methanol, n-hexyl alcohol, and N,N-dimethylformamide are surveyed to examine their performance for the exfoliation of layered ZSB-1. As a result, a highly solvent-stable metal-organic framework rectangular nanosheet retaining undamaged morphology is obtained by the soft-physical method in n-hexyl alcohol. Theoretical simulations reveal that the strong interaction energy between n-hexyl alcohol and MOF layers is responsible for the best exfoliation performance of making the bulk MOF into nanosheets. In addition, ZSB-1 shows a tunable fluorescence peak position, fluorescent lifetime, and quantum yield by simply changing the solvent and morphology. Besides, the ZSB-1 was selected as a fluorescence sensor to detect metal ions, and ZSB-1 nanosheet exhibits excellent sensing ability for Fe³⁺ . It is worth noting that the ZSB-1 nanosheet has better detection limit performance of 0.054 × 10^-6 m than that of its bulk counterpart.

High-performance nanocomposite membranes realized by efficient molecular sieving with CuBDC nanosheets

Two-dimensional (2-D) CuBDC nanosheets (ns-CuBDC) with high-aspect-ratios were deliberately paired with polymers possessing high free volumes to fabricate high performance gas separation membranes. Owing to the molecular sieving effect of the filler, a small ns-CuBDC loading (2-4 wt%) could significantly improve the CO₂/CH₄ selectivities of membranes, resulting in performances that surpass the upper bound limit for polymer membranes.

Gas-exfoliated porous monolayer boron nitride for enhanced aerobic oxidative desulfurization performance

Hexagonal boron nitride has been regarded to be an efficient catalyst in aerobic oxidation fields, but limited by the less-exposed active sites. In this contribution, we proposed a simple green liquid nitrogen gas exfoliation strategy for preparation of porous monolayer nanosheets (BN-1). Owing to the reduced layer numbers, decreased lateral sizes and artificially-constructed pores, increased exposure of active sites was expected, further contributed to an enhanced aerobic oxidative desulfurization (ODS) performance up to ∼98% of sulfur removal, achieving ultra-deep desulfurization. This work not only introduced an excellent catalyst for aerobic ODS, but also provided a strategy for construction of some other highly-efficient monolayer two-dimensional materials for enhanced catalytic performance.

MXene molecular sieving membranes for highly efficient gas separation

Molecular sieving membranes with sufficient and uniform nanochannels that break the permeability-selectivity trade-off are desirable for energy-efficient gas separation, and the arising two-dimensional (2D) materials provide new routes for membrane development. However, for 2D lamellar membranes, disordered interlayer nanochannels for mass transport are usually formed between randomly stacked neighboring nanosheets, which is obstructive for highly efficient separation. Therefore, manufacturing lamellar membranes with highly ordered nanochannel structures for fast and precise molecular sieving is still challenging. Here, we report on lamellar stacked MXene membranes with aligned and regular subnanometer channels, taking advantage of the abundant surface-terminating groups on the MXene nanosheets, which exhibit excellent gas separation performance with H2 permeability >2200 Barrer and H2/CO2 selectivity >160, superior to the state-of-the-art membranes. The results of molecular dynamics simulations quantitatively support the experiments, confirming the subnanometer interlayer spacing between the neighboring MXene nanosheets as molecular sieving channels for gas separation.

Two-dimensional metal–organic framework nanosheets: synthesis and applications

Synthesis and applications of two-dimensional metal–organic framework nanosheets and their composites are summarized.

Two-Dimensional Materials as Prospective Scaffolds for Mixed-Matrix Membrane-Based CO2 Separation

Membrane-based CO₂ separation technology plays a significant role in environmental remediation and clean energy. Two-dimensional (2D) materials with atomically precise structures have emerged as prospective scaffolds to develop mixed-matrix membranes (MMMs) for gas separation. Summarized in this perspective review are the latest breakthrough studies in the synthesis of 2D-material-based MMMs to separate CO₂ from gas mixtures. 2D materials including graphene oxide (GO), metal-organic framework (MOF)-derived nanosheets, covalent organic frameworks (COFs), and transition metal dichalcogenides (TMDs), as fascinating building blocks, have been comprehensively summarized, together with a focus on synthetic processes and gas separation properties. Challenges and the latest advances in the manufacture of novel synthetic 2D materials are briefly discussed to foresee emerging opportunities for the development of new generations of 2D-material-based MMMs.

Copper-Decorated Titanate Nanosheets: Novel Homogeneous Monolayers with a Superior Capacity for Selective Isolation of Hemoglobin

Novel unilamellar and homogeneous titanate nanosheets were prepared by anchoring (3-aminopropyl)triethoxysilane (APTES) and chelating copper ions, also know by the short form Cu-APTES-TiNSs. The nanosheets were uniform two-dimensional lamellas/monolayers with a thickness of 1.9 nm, and they were further characterized by atomic force microscopy, scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectra, X-ray diffraction, X-ray photoelectron spectroscopy, inductively coupled plasma mass spectrometry, and N₂ adsorption-desorption. The copper-decorated titanate nanosheets possess a copper content of 4.28 ± 0.14% and exhibit a favorable selectivity to the adsorption of hemoglobin, with a considerable capacity of 5314.2 mg g^-1. The adsorbed hemoglobin is easily collected with a recovery rate of 91.3% by using 0.5% w/v sodium dodecyl sulfate as an eluent. Circular dichroism spectra confirmed that virtually no conformational alteration is observed for hemoglobin. Cu-APTES-TiNSs are further applied for the selective adsorption of hemoglobin from the human whole blood.

Polycationic Polymer-Regulated Assembling of 2D MOF Nanosheets for High-Performance Nanofiltration

Herein, a two-dimensional metal-organic framework (2D MOF) made of iron porphyrin complex (TCP(Fe)) interconnected with divalent metal ion (M = Zn, Co, and Cu) is used to construct a selective layer, which is explored as an ultrafast and energy-saving nanofiltration (NF) membrane for removing organic dyes from water. Among the layered 2D M-TCP(Fe) membranes, Zn-TCP(Fe) membranes display the highest water permeance, which is 3 times higher than graphene-based membranes with similar rejection. To further improve the separation performances, we utilize polycations to anchor the periphery carboxylic groups of nanosheets, regulating the assembly of 2D Zn-TCP(Fe) nanosheets to produce a new class of crack-free selective layer possessing ultrathin and highly ordered nanochannels for efficient NF. Benefiting from these structural features, our polycation-regulated 2D Zn-TCP(Fe) membranes could offer ultrahigh permeance of 4243 L m^-2 h^-1 bar^-1 (2-fold higher than its pristine) and excellent rejection rates (over 90%) for organic dye with size larger than 0.8 × 1.1 nm. This permeance value is about 2 orders of magnitude higher than the commercial polymeric NF membrane. Additionally, the membranes demonstrate 20-40% salt rejection.

Amine assisted top-down delamination of the two-dimensional metal–organic framework Cu2(bdc)2

Two different strategies of amine assisted delamination of 2D MOFs were developed.