Static microdroplet arrays: a microfluidic device for droplet trapping, incubation and release for enzymatic and cell-based assays

Passive self-synchronized two-droplet generation

We describe the use of two passive components to achieve controllable and alternating droplet generation in a microfluidic device. The approach overcomes the problems associated with irregularities in channel dimensions and fluid flow rates, and allows precise pairing of alternating droplets in a high-throughput manner. We study droplet generation and self-synchronization in a quantitative fashion by using high-speed image analysis.

Sickling of red blood cells through rapid oxygen exchange in microfluidic drops

We have developed a microfluidic approach to study the sickling of red blood cells associated with sickle cell anemia by rapidly varying the oxygen partial pressure within flowing microdroplets. By using the perfluorinated carrier oil as a sink or source of oxygen, the oxygen level within the water droplets quickly equilibrates through exchange with the surrounding oil. This provides control over the oxygen partial pressure within an aqueous drop ranging from 1 kPa to ambient partial pressure, i.e. 21 kPa. The dynamics of the oxygen exchange is characterized through fluorescence lifetime measurements of a ruthenium compound dissolved in the aqueous phase. The gas exchange is shown to occur primarily during and directly after droplet formation, in 0.1 to 0.5 s depending on the droplet diameter and speed. The controlled deoxygenation is used to trigger the polymerization of hemoglobin within sickle red blood cells, encapsulated in drops. This process is observed using polarization microscopy, which yields a robust criterion to detect polymerization based on transmitted light intensity through crossed polarizers.

Microfluidic droplets: new integrated workflows for biological experiments

Miniaturization of the classical test tube to picoliter dimensions is possible in monodisperse water-in-oil droplets that are generated in microfluidic devices. The establishment of standard unit operations for droplet handling and the ability to carry out experiments with DNA, proteins, cells and organisms provides the basis for the design of more complex workflows to address biological challenges. The emerging experimental format makes possible a quantitative readout for large numbers of experiments with a precision comparable to the macroscopic scale. Directed evolution, diagnostics and compound screening are areas in which the first steps are being taken toward the long-term goal of transforming the way we design and carry out experiments.

Dynamics of microfluidic droplets

This critical review discusses the current understanding of the formation, transport, and merging of drops in microfluidics. We focus on the physical ingredients which determine the flow of drops in microchannels and recall classical results of fluid dynamics which help explain the observed behaviour. We begin by introducing the main physical ingredients that differentiate droplet microfluidics from single-phase microfluidics, namely the modifications to the flow and pressure fields that are introduced by the presence of interfacial tension. Then three practical aspects are studied in detail: (i) The formation of drops and the dominant interactions depending on the geometry in which they are formed. (ii) The transport of drops, namely the evaluation of drop velocity, the pressure-velocity relationships, and the flow field induced by the presence of the drop. (iii) The fusion of two drops, including different methods of bridging the liquid film between them which enables their merging.

Exploring peptide space for enzyme modulators

A method is presented for screening high-density arrays to discover peptides that bind and modulate enzyme activity. A polyvinyl alcohol solution was applied to array surfaces to limit the diffusion of product molecules released from enzymatic reactions, allowing the simultaneous measurement of enzyme activity and binding at each peptide spot. For proof of concept, it was possible to identify peptides that bound to horseradish peroxidase, alkaline phosphatase, and beta-galactosidase and substantially altered enzyme activity by comparing the binding level of peptide to enzyme and bound enzyme activity. This basic technique may be generally applicable to find peptides or other small molecules that modify enzyme activity.

Microfluidic systems for biosensing

In the past two decades, Micro Fluidic Systems (MFS) have emerged as a powerful tool for biosensing, particularly in enriching and purifying molecules and cells in biological samples. Compared with conventional sensing techniques, distinctive advantages of using MFS for biomedicine include ultra-high sensitivity, higher throughput, in-situ monitoring and lower cost. This review aims to summarize the recent advancements in two major types of micro fluidic systems, continuous and discrete MFS, as well as their biomedical applications. The state-of-the-art of active and passive mechanisms of fluid manipulation for mixing, separation, purification and concentration will also be elaborated. Future trends of using MFS in detection at molecular or cellular level, especially in stem cell therapy, tissue engineering and regenerative medicine, are also prospected.

High-performance single cell genetic analysis using microfluidic emulsion generator arrays

High-throughput genetic and phenotypic analysis at the single cell level is critical to advance our understanding of the molecular mechanisms underlying cellular function and dysfunction. Here we describe a high-performance single cell genetic analysis (SCGA) technique that combines high-throughput microfluidic emulsion generation with single cell multiplex polymerase chain reaction (PCR). Microfabricated emulsion generator array (MEGA) devices containing 4, 32, and 96 channels are developed to confer a flexible capability of generating up to 3.4 x 10(6) nanoliter-volume droplets per hour. Hybrid glass-polydimethylsiloxane diaphragm micropumps integrated into the MEGA chips afford uniform droplet formation, controlled generation frequency, and effective transportation and encapsulation of primer functionalized microbeads and cells. A multiplex single cell PCR method is developed to detect and quantify both wild type and mutant/pathogenic cells. In this method, microbeads functionalized with multiple forward primers targeting specific genes from different cell types are used for solid-phase PCR in droplets. Following PCR, the droplets are lysed and the beads are pooled and rapidly analyzed by multicolor flow cytometry. Using Escherichia coli bacterial cells as a model, we show that this technique enables digital detection of pathogenic E. coli O157 cells in a high background of normal K12 cells, with a detection limit on the order of 1/10(5). This result demonstrates that multiplex SCGA is a promising tool for high-throughput quantitative digital analysis of genetic variation in complex populations.

A double droplet trap system for studying mass transport across a droplet-droplet interface

Here we present the design, fabrication and operation of a microfluidic device to trap droplets in a large array of droplet pairs in a controlled manner with the aim of studying the transport of small molecules across the resultant surfactant bilayers formed between the droplet pairs.

Light-driven formation and rupture of droplet bilayers

We demonstrate the optical manipulation of nanoliter aqueous droplets containing surfactant or lipid molecules and immersed in an organic liquid using near-infrared light. The resulting emulsion droplets are manipulated using both the thermocapillary effect and convective fluid motion. Droplet-pair interactions induced in the emulsion upon optical initiation and control provide direct observations of the coalescence steps in intricate detail. Droplet-droplet adhesion (bilayer formation) is observed under several conditions. Selective bilayer rupture is also realized using the same infrared laser. The technique provides a novel approach to studying thin film drainage and interface stability in emulsion dynamics. The formation of stable lipid bilayers at the adhesion interface between interacting water droplets can provide an optical platform on which to build droplet-based lipid bilayer assays. The technique also has relevance to understanding and improving microfluidics applications by devising Petri dish-based droplet assays requiring no substrate fabrication.

SlipChip for immunoassays in nanoliter volumes

This article describes a SlipChip-based approach to perform bead-based heterogeneous immunoassays with multiple nanoliter-volume samples. As a potential device to analyze the output of the chemistrode, the performance of this platform was tested using low concentrations of biomolecules. Two strategies to perform the immunoassay in the SlipChip were tested: (1) a unidirectional slipping method to combine the well containing a sample with a series of wells preloaded with reagents and (2) a back-and-forth slipping method to introduce a series of reagents to a well containing the sample by reloading and slipping the well containing the reagent. The SlipChips were fabricated with hydrophilic surfaces on the interior of the wells and with hydrophobic surfaces on the face of the SlipChip to enhance filling, transferring, and maintaining aqueous solutions in shallow wells. Nanopatterning was used to increase the hydrophobic nature of the SlipChip surface. Magnetic beads containing the capture antibody were efficiently transferred between wells and washed by serial dilution. An insulin immunoenzymatic assay showed a detection of limit of approximately 13 pM. A total of 48 droplets of nanoliter volume were analyzed in parallel, including an on-chip calibration. The design of the SlipChip is flexible to accommodate other types of immunoassays, both heterogeneous and homogeneous. This work establishes the possibility of using SlipChip-based immunoassays in small volumes for a range of possible applications, including analysis of plugs from a chemistrode, detection of molecules from single cells, and diagnostic monitoring.

Single-biomolecule kinetics: the art of studying a single enzyme

The potential of single-enzyme studies to unravel the complex energy landscape of these polymeric catalysts is the next critical step in enzymology. From its inception in Rotman's emulsion experiments in the 1960s, the field of single-molecule enzymology has now advanced into the time-resolved age. Technological advances have enabled individual enzymatic turnover reactions to be observed with a millisecond time resolution. A number of initial studies have revealed the underlying static and dynamic disorder in the catalytic rates originating from conformational fluctuations. Although these experiments are still in their infancy, they may be able to relate the topography of the energy landscape to the biological function and regulation of enzymes. This review summarizes some of the experimental techniques and data-analysis methods that have been used to study individual enzyme molecules in search of a deeper understanding of their kinetics.

Microfluidic Droplet Technique for In Vitro Directed Evolution

Increasingly over the past two decades, biotechnologists have been exploiting various molecular technologies for high-throughput screening of genes and their protein products to isolate novel functionalities with a wide range of industrial applications. One particular technology now widely used for these purposes involves directed evolution, an artificial form of evolution in which genes and proteins are evolved towards new or improved functions by imposing intense selection pressures on libraries of mutant genes generated by molecular biology techniques and expressed in heterologous systems such as Escherichia coli. Most recently, the rapid development of droplet-based microfluidics has created the potential to dramatically increase the power of directed evolution by increasing the size of the libraries and the throughput of the screening by several orders of magnitude. Here, we review the methods for generating and controlling droplets in microfluidic systems, and their applications in directed evolution. We focus on the methodologies for cell-based assays, in vitro protein expression and DNA amplification, and the prospects for using such platforms for directed evolution in next-generation biotechnologies.

Automated mass action model space generation and analysis methods for two-reactant combinatorially complex equilibriums: an analysis of ATP-induced ribonucleotide reductase R1 hexamerization data

BACKGROUND

Ribonucleotide reductase is the main control point of dNTP production. It has two subunits, R1, and R2 or p53R2. R1 has 5 possible catalytic site states (empty or filled with 1 of 4 NDPs), 5 possible s-site states (empty or filled with ATP, dATP, dTTP or dGTP), 3 possible a-site states (empty or filled with ATP or dATP), perhaps two possible h-site states (empty or filled with ATP), and all of this is folded into an R1 monomer-dimer-tetramer-hexamer equilibrium where R1 j-mers can be bound by variable numbers of R2 or p53R2 dimers. Trillions of RNR complexes are possible as a result. The problem is to determine which are needed in models to explain available data. This problem is intractable for 10 reactants, but it can be solved for 2 and is here for R1 and ATP.

RESULTS

Thousands of ATP-induced R1 hexamerization models with up to three (s, a and h) ATP binding sites per R1 subunit were automatically generated via hypotheses that complete dissociation constants are infinite and/or that binary dissociation constants are equal. To limit the model space size, it was assumed that s-sites are always filled in oligomers and never filled in monomers, and to interpret model terms it was assumed that a-sites fill before h-sites. The models were fitted to published dynamic light scattering data. As the lowest Akaike Information Criterion (AIC) of the 3-parameter models was greater than the lowest of the 2-parameter models, only models with up to 3 parameters were fitted. Models with sums of squared errors less than twice the minimum were then partitioned into two groups: those that contained no occupied h-site terms (508 models) and those that contained at least one (1580 models). Normalized AIC densities of these two groups of models differed significantly in favor of models that did not include an h-site term (Kolmogorov-Smirnov p < 1 x 10(-15)); consistent with this, 28 of the top 30 models (ranked by AICs) did not include an h-site term and 28/30 > 508/2088 with p < 2 x 10(-15). Finally, 99 of the 2088 models did not have any terms with ATP/R1 ratios >1.5, but of the top 30, there were 14 such models (14/30 > 99/2088 with p < 3 x 10(-16)), i.e. the existence of R1 hexamers with >3 a-sites occupied by ATP is also not supported by this dataset.

CONCLUSION

The analysis presented suggests that three a-sites may not be occupied by ATP in R1 hexamers under the conditions of the data analyzed. If a-sites fill before h-sites, this implies that the dataset analyzed can be explained without the existence of an h-site.

Simultaneous determination of gene expression and enzymatic activity in individual bacterial cells in microdroplet compartments

A microfluidic device capable of storing picoliter droplets containing single bacteria at constant volumes has been fabricated in PDMS. Once captured in droplets that remain static in the device, bacteria express both a red fluorescent protein (mRFP1) and the enzyme, alkaline phosphatase (AP), from a biscistronic construct. By measuring the fluorescence intensity of both the mRFP1 inside the cells and a fluorescent product formed as a result of the enzymatic activity outside the cells, gene expression and enzymatic activity can be simultaneously and continuously monitored. By collecting data from many individual cells, the distribution of activities in a cell is quantified and the difference in activity between two AP mutants is measured.

Multi-step microfluidic droplet processing: kinetic analysis of an in vitro translated enzyme

Microdroplets in water-in-oil emulsions can be used as microreactors with volumes 10(3) to 10(9) times smaller than the smallest working volumes in a microtitre plate well (1-2 microL). However, many reactions and assays require multiple steps where new reagents are added at defined times, to start, modify or terminate a reaction. The most flexible way to add new reagents to pre-formed droplets is by controlled, pairwise droplet fusion. We describe a droplet-based microfluidic system capable of performing multiple operations, including pairwise droplet fusion, to analyze complex and sequential multi-step reactions. It is exemplified by performing a series of six on-chip and two off-chip operations which enable the coupled in vitro transcription and translation of cotA laccase genes in droplets and, after performing a controlled fusion with droplets containing laccase assay reagents, the end-point and kinetic analysis of the catalytic activity of the translated protein. In vitro translation and the laccase assay must be performed sequentially as the conditions for the laccase assay are not compatible with in vitro translation. Droplet fusion was performed by electrocoalescence at a rate of approximately 3000 fusion events per second and nearly 90% of droplets were fused one-to-one (one droplet containing in vitro translated laccase fused to one droplet containing the reagents for the laccase assay). The ability to uncouple the enzymatic assay from in vitro translation greatly extends the range of activities of in vitro translated proteins that can potentially be screened in droplet-based microfluidic systems. Furthermore, the system also opens up the possibility of performing a wide range of other new (bio)chemical reactions in droplets.

High-throughput confinement and detection of single DNA molecules in aqueous microdroplets

A droplet-based microfluidic system combined with high-sensitivity optical detection is used as a tool for high-throughput confinement and detection of single DNA molecules.