Rational design of alpha-helical antimicrobial peptides with enhanced activities and specificity/therapeutic index

Interactions between Membranes and "Metaphilic" Polypeptide Architectures with Diverse Side-Chain Populations

At physiological conditions, most proteins or peptides can fold into relatively stable structures that present on their molecular surfaces specific chemical patterns partially smeared out by thermal fluctuations. These nanoscopically defined patterns of charge, hydrogen bonding, and/or hydrophobicity, along with their elasticity and shape stability (folded proteins have Young's moduli of ∼1 × 10⁸ Pa), largely determine and limit the interactions of these molecules, such as molecular recognition and allosteric regulation. In this work, we show that the membrane-permeating activity of antimicrobial peptides (AMPs) and cell-penetrating peptides (CPPs) can be significantly enhanced using prototypical peptides with "molten" surfaces: metaphilic peptides with quasi-liquid surfaces and adaptable shapes. These metaphilic peptides have a bottlebrush-like architecture consisting of a rigid helical core decorated with mobile side chains that are terminated by cationic or hydrophobic groups. Computer simulations show that these flexible side chains can undergo significant rearrangement in response to different environments, giving rise to adaptable surface chemistry of the peptide. This quality makes it possible to control their hydrophobicity over a broad range while maintaining water solubility, unlike many AMPs and CPPs. Thus, we are able to show how the activity of these peptides is amplified by hydrophobicity and cationic charge, and rationalize these results using a quantitative mean-field theory. Computer simulations show that the shape-changing properties of the peptides and the resultant adaptive presentation of chemistry play a key enabling role in their interactions with membranes.

Insight into the mechanism of action of temporin-SHa, a new broad-spectrum antiparasitic and antibacterial agent

Antimicrobial peptides (AMPs) are promising drugs to kill resistant pathogens. In contrast to bacteria, protozoan parasites, such as Leishmania, were little studied. Therefore, the antiparasitic mechanism of AMPs is still unclear. In this study, we sought to get further insight into this mechanism by focusing our attention on temporin-SHa (SHa), a small broad-spectrum AMP previously shown to be active against Leishmania infantum. To improve activity, we designed analogs of SHa and compared the antibacterial and antiparasitic mechanisms. [K³]SHa emerged as a highly potent compound active against a wide range of bacteria, yeasts/fungi, and trypanosomatids (Leishmania and Trypanosoma), with leishmanicidal intramacrophagic activity and efficiency toward antibiotic-resistant strains of S. aureus and antimony-resistant L. infantum. Multipassage resistance selection demonstrated that temporins-SH, particularly [K³]SHa, are not prone to induce resistance in Escherichia coli. Analysis of the mode of action revealed that bacterial and parasite killing occur through a similar membranolytic mechanism involving rapid membrane permeabilization and depolarization. This was confirmed by high-resolution imaging (atomic force microscopy and field emission gun-scanning electron microscopy). Multiple combined techniques (nuclear magnetic resonance, surface plasmon resonance, differential scanning calorimetry) allowed us to detail peptide-membrane interactions. [K³]SHa was shown to interact selectively with anionic model membranes with a 4-fold higher affinity (K_D = 3 x 10⁻⁸ M) than SHa. The amphipathic α-helical peptide inserts in-plane in the hydrophobic lipid bilayer and disrupts the acyl chain packing via a detergent-like effect. Interestingly, cellular events, such as mitochondrial membrane depolarization or DNA fragmentation, were observed in L. infantum promastigotes after exposure to SHa and [K³]SHa at concentrations above IC₅₀. Our results indicate that these temporins exert leishmanicidal activity via a primary membranolytic mechanism but can also trigger apoptotis-like death. The many assets demonstrated for [K³]SHa make this small analog an attractive template to develop new antibacterial/antiparasitic drugs.

Comparative analysis of internalisation, haemolytic, cytotoxic and antibacterial effect of membrane-active cationic peptides: aspects of experimental setup

Cationic peptides proved fundamental importance as pharmaceutical agents and/or drug carrier moieties functioning in cellular processes. The comparison of the in vitro activity of these peptides is an experimental challenge and a combination of different methods, such as cytotoxicity, internalisation rate, haemolytic and antibacterial effect, is necessary. At the same time, several issues need to be addressed as the assay conditions have a great influence on the measured biological effects and the experimental setup needs to be optimised. Therefore, critical comparison of results from different assays using representative examples of cell penetrating and antimicrobial peptides was performed and optimal test conditions were suggested. Our main goal was to identify carrier peptides for drug delivery systems of antimicrobial drug candidates. Based on the results of internalisation, haemolytic, cytotoxic and antibacterial activity assays, a classification of cationic peptides is advocated. We found eight promising carrier peptides with good penetration ability of which Penetratin, Tat, Buforin and Dhvar4 peptides showed low adverse haemolytic effect. Penetratin, Transportan, Dhvar4 and the hybrid CM15 peptide had the most potent antibacterial activity on Streptococcus pneumoniae (MIC lower than 1.2 μM) and Transportan was effective against Mycobacterium tuberculosis as well. The most selective peptide was the Penetratin, where the effective antimicrobial concentration on pneumococcus was more than 250 times lower than the HC₅₀ value. Therefore, these peptides and their analogues will be further investigated as drug delivery systems for antimicrobial agents.

Peptides with Dual Antimicrobial and Anticancer Activities

In recent years, the number of people suffering from cancer and multi-resistant infections has increased, such that both diseases are already seen as current and future major causes of death. Moreover, chronic infections are one of the main causes of cancer, due to the instability in the immune system that allows cancer cells to proliferate. Likewise, the physical debility associated with cancer or with anticancer therapy itself often paves the way for opportunistic infections. It is urgent to develop new therapeutic methods, with higher efficiency and lower side effects. Antimicrobial peptides (AMPs) are found in the innate immune system of a wide range of organisms. Identified as the most promising alternative to conventional molecules used nowadays against infections, some of them have been shown to have dual activity, both as antimicrobial and anticancer peptides (ACPs). Highly cationic and amphipathic, they have demonstrated efficacy against both conditions, with the number of nature-driven or synthetically designed peptides increasing year by year. With similar properties, AMPs that can also act as ACPs are viewed as future chemotherapeutic drugs, with the advantage of low propensity to resistance, which started this paradigm in the pharmaceutical market. These peptides have already been described as molecules presenting killing mechanisms at the membrane level, but also acting toward intracellular targets, which increases their success compartively to one-target specific drugs. This review will approach the desirable characteristics of small peptides that demonstrated dual activity against microbial infections and cancer, as well as the peptides engaged in clinical trials.

HemoPred: a web server for predicting the hemolytic activity of peptides

AIM

Toxicity arising from hemolytic activity of peptides hinders its further progress as drug candidates.

MATERIALS & METHODS

This study describes a sequence-based predictor based on a random forest classifier using amino acid composition, dipeptide composition and physicochemical descriptors (named HemoPred).

RESULTS

This approach could outperform previously reported method and typical classification methods (e.g., support vector machine and decision tree) verified by fivefold cross-validation and external validation with accuracy and Matthews correlation coefficient in excess of 95% and 0.91, respectively. Results revealed the importance of hydrophobic and Cys residues on α-helix and β-sheet, respectively, on the hemolytic activity.

CONCLUSION

A sequence-based predictor which is publicly available as the web service of HemoPred, is proposed to predict and analyze the hemolytic activity of peptides.

Design of novel antimicrobial peptide dimer analogues with enhanced antimicrobial activity in vitro and in vivo by intermolecular triazole bridge strategy

Currently, antimicrobial peptides have attracted considerable attention because of their broad-sprectum activity and low prognostic to induce antibiotic resistance. In our study, for the first time, a series of side-chain hybrid dimer peptides J-AA (Anoplin-Anoplin), J-RR (RW-RW), and J-AR (Anoplin-RW) based on the wasp peptide Anoplin and the arginine- and tryptophan-rich hexapeptide RW were designed and synthesized by click chemistry, with the intent to improve the antimicrobial efficacy of peptides against bacterial pathogens. The results showed that all dimer analogues exhibited up to a 4-16 fold increase in antimicrobial activity compared to the parental peptides against bacterial strains. Furthermore, the antimicrobial activity was confirmed by time-killing kinetics assay with two strains which showed that these dimer analogues at 1, 2×MIC were rapidly bactericidal and reduced the initial inoculum significantly during the first 2-6h. Notably, dimer peptides showed synergy and additivity effects when used in combination with conventional antibiotics rifampin or penicillin respectively against the multidrug-resistant strains. In the Escherichia coli-infected mouse model, all of hybrid dimer analogues had significantly lower degree of bacterial load than the untreated control group when injected once i.p. at 5mg/kg. In addition, the infected mice by methicillin-resistant (MRSA) strain could be effectively treated with J-RR. All of dimer analogues had membrane-active action mode. And the membrane-dependent mode of action signifies that peptides functions freely and without regard to conventional resistant mechanisms. Circular dichroism analyses of all dimer analogues showed a general predominance of α-helix conformation in 50% trifluoroethanol (TFE). Additionally, the acute toxicities study indicated that J-RR or J-AR did not show the signs of toxicity when adult mice exposed to concentration up to 120mg/kg. The 50% lethal dose (LD₅₀) of J-AA was 53.6mg/kg. In conclusion, to design and synthesize side chain-hybrid dimer analogues via click chemistry may offer a new strategy for antibacterial therapeutic option.

LL-37-derived membrane-active FK-13 analogs possessing cell selectivity, anti-biofilm activity and synergy with chloramphenicol and anti-inflammatory activity

Although the human-derived antimicrobial peptide (AMP) LL-37 has potent antimicrobial and anti-inflammatory activities, its therapeutic application is limited by its low cell selectivity and high production cost due to its large size. To overcome these problems, we tried to develop novel LL-37-derived short α-helical AMPs with improved cell selectivity and without a significant loss of anti-inflammatory activity relative to that of parental LL-37. Using amino acid substitution, we designed and synthesized a series of FK13 analogs based on the sequence of the 13-meric short FK13 peptide (residues 17-29 of LL-37) that has been identified as the region responsible for the antimicrobial activity of LL-37. Among the designed FK13 analogs, FK-13-a1 and FK-13-a7 showed high cell selectivity and retained the anti-inflammatory activity. The therapeutic index (a measure of cell selectivity) of FK-13-a1 and FK-13-a7 was 6.3- and 2.3-fold that of parental LL-37, respectively. Furthermore, FK-13-a1 and FK-13-a7 displayed more potent antimicrobial activity against antibiotic-resistant bacteria including MRSA, MDRPA, and VREF, than did LL-37. In addition, FK-13-a1 and FK-13-a7 exhibited greater synergistic effects with chloramphenicol against MRSA and MDRPA and were more effective anti-biofilm agents against MDRPA than LL-37 was. Moreover, FK-13-a1 and FK-13-a7 maintained their activities in the presence of physiological salts and human serum. SYTOX green uptake, membrane depolarization and killing kinetics revealed that FK13-a1 and FK13-a7 kills microbial cells by permeabilizing the cell membrane and damaging membrane integrity. Taken together, our results suggest that FK13-a1 and FK13-a7 can be developed as novel antimicrobial/anti-inflammatory agents.

Lysine-Based α-Peptide/β-Peptoid Peptidomimetics: Influence of Hydrophobicity, Fluorination, and Distribution of Cationic Charge on Antimicrobial Activity and Cytotoxicity

Multidrug-resistant bacteria pose a serious threat to public health worldwide. Previously, α-peptide/β-peptoid hybrid oligomers were found to display activity against Gram-negative multidrug-resistant bacteria. In the present work, the influence of hydrophobicity, fluorination, and distribution of cationic/hydrophobic residues on antimicrobial, hemolytic, and cytotoxic properties of α-peptide/β-peptoid hybrids were investigated. An array of 22 peptidomimetics was tested. Analogues with enhanced hydrophobicity were found to exhibit increased activity against Gram-positive bacteria. Incorporation of fluorinated residues into the peptidomimetics conferred increased potency against Gram-positive bacteria, while hemolytic properties and activity against Gram-negative bacteria depended on the degree and type of fluorination. Generally, shorter oligomers were less potent than the corresponding longer analogues. However, some short analogues exhibited equal or higher antimicrobial activity. The alternating hydrophobic/cationic design proved superior to other distribution patterns of cationic side chains and hydrophobic moieties.

High-Performance Liquid Chromatography and Mass Spectrometry-Based Design of Proteolytically Stable Antimicrobial Peptides

The emergence of multiresistant bacteria worldwide together with the shortage of effective antibiotics in the market emphasizes the need for the design and development of the promising agents for the treatment of superbug-associated infections. Antimicrobial peptides (AMPs) have been considered as excellent candidates to tackle this issue, and thousands of peptides of different lengths, amino acid compositions, and mode of action have been discovered and prepared to date. Nevertheless, it is of great importance to develop innovative formulation strategies for delivering these AMPs and to improve their low bioavailability and metabolic stability, particularly against proteases, if these peptides are to find applications in the clinic and administered orally or parenterally or used as dietary supplements. The purpose of this chapter is to describe basic experimental principles, based on analytical reversed-phase high-performance liquid chromatography (RP-HPLC) and mass spectrometry (MS), for the prospective design of orally bioavailable AMPs considering the structural characteristics of the peptides and the substrate specificity of proteases that abound in the body especially at sites of infection.

Biological and structural effects of the conjugation of an antimicrobial decapeptide with saturated, unsaturated, methoxylated and branched fatty acids

The increasing bacterial resistance against conventional antibiotics has led to the search for new antimicrobial drugs with different modes of action. Cationic antimicrobial peptides (AMPs) and lipopeptides are promising candidates to treat infections because they act on bacterial membranes causing rapid destruction of sensitive bacteria. In this study, a decapeptide named A2 (IKQVKKLFKK) was conjugated at the N-terminus with saturated, unsaturated, methoxylated and methyl -branched fatty acids of different chain lengths (C8 - C20), the antimicrobial and structural properties of the lipopeptides being then investigated. The attachment of the fatty acid chain significantly improved the antimicrobial activity of A2 against bacteria, and so, endowed it with moderated antifungal activity against yeast strains belonging to genus Candida. Lipopeptides containing hydrocarbon chain lengths between C8 and C14 were the best antibacterial compounds (MIC = 0.7 to 5.8 μM), while the most active compounds against yeast were A2 conjugated with methoxylated and enoic fatty acids (11.1 to 83.3 μM). The improvement in antimicrobial activity was mainly related to the amphipathic secondary structure adopted by A2 lipopeptides in the presence of vesicles that mimic bacterial membranes. Peptide conjugation with long hydrocarbon chains (C12 or more), regardless of their structure, significantly increased toxicity towards eukaryotic cells, resulting in a loss of selectivity. These findings suggest that A2-derived lipopeptides are potential good candidates for the treatment of infectious diseases caused by bacteria and opportunistic pathogenic yeast belonging to genus Candida. Copyright © 2016 European Peptide Society and John Wiley & Sons, Ltd.

A New Synthetic Peptide Having Two Target of Antibacterial Action in E. coli ML35

The increased resistance of microorganisms to the different antimicrobials available to today has highlighted the need to find new therapeutic agents, including natural and/or synthetic antimicrobial peptides (AMPs). This study has evaluated the antimicrobial activity of synthetic peptide 35409 (RYRRKKKMKKALQYIKLLKE) against Staphylococcus aureus ATCC 29213, Pseudomonas aeruginosa ATCC 15442 and Escherichia coli ML 35 (ATCC 43827). The results have shown that peptide 35409 inhibited the growth of these three bacterial strains, having 16-fold greater activity against E. coli and P. aeruginosa, but requiring less concentration regarding E. coli (22 μM). When analyzing this activity against E. coli compared to time taken, it was found that this peptide inhibited bacterial growth during the first 60 min and reduced CFU/mL 1 log after 120 min had elapsed. This AMP permeabilized the E. coli membrane by interaction with membrane phospholipids, mainly phosphatidylethanolamine, inhibited cell division and induced filamentation, suggesting two different targets of action within a bacterial cell. Cytotoxicity studies revealed that peptide 35409 had low hemolytic activity and was not cytotoxic for two human cell lines. We would thus propose, in the light of these findings, that the peptide 35409 sequence should provide a promising template for designing broad-spectrum AMPs.

Identification and Characterisation of the Antimicrobial Peptide, Phylloseptin-PT, from the Skin Secretion of Phyllomedusa tarsius, and Comparison of Activity with Designed, Cationicity-Enhanced Analogues and Diastereomers

Antimicrobial peptides belonging to the phylloseptin family are mainly found in phyllomedusine frogs. These peptides not only possess potent antimicrobial activity but exhibit low toxicity against eukaryotic cells. Therefore, they are considered as promising drug candidates for a number of diseases. In a recent study, potent antimicrobial activity was correlated with the conserved structures and cationic amphiphilic characteristics of members of this peptide family. A phylloseptin peptide precursor was discovered here in the skin secretion of Phyllomedusa tarsius and the mature peptide was validated by MS/MS sequencing, and was subsequently named phylloseptin-PT. The chemically-synthesized and purified phylloseptin-PT displayed activity against Staphylococcus aureus and Candida albicans. Nevertheless, a range of cationicity-enhanced peptide analogues of phylloseptin-PT, which contained amino acid substitutions at specific sites, exhibited significant increases in antimicrobial activity compared to native phylloseptin-PT. In addition, alternative conformers which were designed and chemically-synthesized with d-lysine, showed potent antimicrobial activity and enhanced bioavailability. These data indicate that phylloseptins may represent potential candidates for next-generation antibiotics. Thus, rational design through modification of natural antimicrobial peptide templates could provide an accelerated path to overcoming obstacles en-route to their possible clinical applications.

Methodology for identification of pore forming antimicrobial peptides from soy protein subunits β-conglycinin and glycinin

Antimicrobial peptides (AMPs) inactivate microbial cells through pore formation in cell membrane. Because of their different mode of action compared to antibiotics, AMPs can be effectively used to combat drug resistant bacteria in human health. AMPs can also be used to replace antibiotics in animal feed and immobilized on food packaging films. In this research, we developed a methodology based on mechanistic evaluation of peptide-lipid bilayer interaction to identify AMPs from soy protein. Production of AMPs from soy protein is an attractive, cost-saving alternative for commercial consideration, because soy protein is an abundant and common protein resource. This methodology is also applicable for identification of AMPs from any protein. Initial screening of peptide segments from soy glycinin (11S) and soy β-conglycinin (7S) subunits was based on their hydrophobicity, hydrophobic moment and net charge. Delicate balance between hydrophilic and hydrophobic interactions is necessary for pore formation. High hydrophobicity decreases the peptide solubility in aqueous phase whereas high hydrophilicity limits binding of the peptide to the bilayer. Out of several candidates chosen from the initial screening, two peptides satisfied the criteria for antimicrobial activity, viz. (i) lipid-peptide binding in surface state and (ii) pore formation in transmembrane state of the aggregate. This method of identification of antimicrobial activity via molecular dynamics simulation was shown to be robust in that it is insensitive to the number of peptides employed in the simulation, initial peptide structure and force field. Their antimicrobial activity against Listeria monocytogenes and Escherichia coli was further confirmed by spot-on-lawn test.

Design and characterization of short hybrid antimicrobial peptides from pEM-2, mastoparan-VT1, and mastoparan-B

Antimicrobial peptides are considered to be excellent templates for designing novel antibiotics because of their broad-spectrum antimicrobial activity and their low prognostic to induce antibiotic resistance. In this study, for the first time, a series of short hybrid antimicrobial peptides combined by different fragments of venom-derived alpha-helical antimicrobial peptides pEM-2, mastoparan-VT1, and mastoparan-B were designed with the intent to improve the therapeutic index of the parental peptides. Short hybrid antimicrobial peptides PV, derived from pEM-2 and mastoparan-VT1, was found to possess the highest antibacterial, hemolytic, and cytotoxic activity. Short hybrid antimicrobial peptides PV3, derived from pEM-2 and three fragments of mastoparan-VT1, showed more than threefold improvement in therapeutic index compared with parental peptides pEM-2 and mastoparan-VT1. PV had the highest antimicrobial activity in stability studies. Except BVP, designed based on all three parental peptides, the other short hybrid antimicrobial peptides at their minimal inhibitory concentration and 2× minimal inhibitory concentration required less than 120 and 60 min to reduce >3log10 the initial inoculum, respectively. All peptides had membrane-disrupting activity in a time-dependent manner. Collectively, this study highlights the potential for rational design of improved short hybrid antimicrobial peptides such as PV3 that was an ideal candidate for further assessment with the ultimate purpose of development of effective antimicrobial agents.

A potential food biopreservative, CecXJ-37N, non-covalently intercalates into the nucleotides of bacterial genomic DNA beyond membrane attack

The antibacterial activities and mechanism of an amide-modified peptide CecXJ-37N were investigated in this study. CecXJ-37N showed small MICs (0.25-7.8μM) against eight harmful strains common in food industry. The α-helix proportion of CecXJ-37N increased by 11-fold in prokaryotic membrane comparable environments; cytotoxicity studies demonstrated the MHC was significantly higher than that of non-amidated isoform. Moreover, CecXJ-37N possessed stronger capacities to resist trypsin and pepsin hydrolysis within two hours. Flow cytometry and scanning electron microscopy demonstrated that CecXJ-37N induced pore-formation, morphological changes, and lysed E. coli cells. Fluorescence microscopy indicated that CecXJ-37N penetrated E. coli membrane and accumulated in cytoplasm. Further ultraviolet-visible spectroscopy suggested that CecXJ-37N changed the action mode of parental peptide interacting with bacterial genome from outside binding to a tightly non-covalent intercalation into nucleotides. Overall, this study suggested that amide-modification enhanced antimicrobial activity and reduced the cytotoxicity, thus could be potential strategies for developing novel food preservatives.

Specificity and mechanism of action of alpha-helical membrane-active peptides interacting with model and biological membranes by single-molecule force spectroscopy

In this study, to systematically investigate the targeting specificity of membrane-active peptides on different types of cell membranes, we evaluated the effects of peptides on different large unilamellar vesicles mimicking prokaryotic, normal eukaryotic, and cancer cell membranes by single-molecule force spectroscopy and spectrum technology. We revealed that cationic membrane-active peptides can exclusively target negatively charged prokaryotic and cancer cell model membranes rather than normal eukaryotic cell model membranes. Using Acholeplasma laidlawii, 3T3-L1, and HeLa cells to represent prokaryotic cells, normal eukaryotic cells, and cancer cells in atomic force microscopy experiments, respectively, we further studied that the single-molecule targeting interaction between peptides and biological membranes. Antimicrobial and anticancer activities of peptides exhibited strong correlations with the interaction probability determined by single-molecule force spectroscopy, which illustrates strong correlations of peptide biological activities and peptide hydrophobicity and charge. Peptide specificity significantly depends on the lipid compositions of different cell membranes, which validates the de novo design of peptide therapeutics against bacteria and cancers.

Roles of d-Amino Acids on the Bioactivity of Host Defense Peptides

Host defense peptides (HDPs) are positively-charged and amphipathic components of the innate immune system that have demonstrated great potential to become the next generation of broad spectrum therapeutic agents effective against a vast array of pathogens and tumor. As such, many approaches have been taken to improve the therapeutic efficacy of HDPs. Amongst these methods, the incorporation of d-amino acids (d-AA) is an approach that has demonstrated consistent success in improving HDPs. Although, virtually all HDP review articles briefly mentioned about the role of d-AA, however it is rather surprising that no systematic review specifically dedicated to this topic exists. Given the impact that d-AA incorporation has on HDPs, this review aims to fill that void with a systematic discussion of the impact of d-AA on HDPs.

Antimicrobial Properties of an Immunomodulator - 15 kDa Human Granulysin

Granulysin, a cationic protein expressed by human natural killer cells and cytotoxic T lymphocytes, is a mediator for drug-induced Stevens-Johnson syndrome and graft-versus-host disease. Some 15 kDa granulysin are processed into 9 kDa forms and sequestered in cytolytic granules, while others are constitutively secreted into body fluids. Both 9 and 15 kDa granulysin have been shown to be a serum marker for cell-mediated immunity. Furthermore, 15 kDa is able to activate monocyte differentiation. However, its antimicrobial properties have not been clearly addressed. Here, we report a novel method to prepare both the soluble 9 and 15 kDa granulysin and show that the 15 kDa form is more effective than the 9 kDa form in exerting specific antimicrobial activity against Pseudomonas aeruginosa within a range of few micromolars. We also show that the 15 kDa granulysin is able to hyperpolarize the membrane potential and increase membrane permeability of treated bacteria. Interestingly, the bactericidal activity and membrane permeability of the granulysins were markedly reduced at lower pH (pH 5.4) as a result of probable increase in hydrophobicity of the granulysins. Additionally, we’ve also shown the granulysin to inhibit biofilm formation by P. aeruginosa. These results suggest that the 15 kDa granulysin exhibits a novel mechanism in bacteria killing in a way that’s different from most antimicrobial peptides. Our novel granulysin preparation methodology will be useful for further study of action mechanisms of other antimicrobial, cytotoxic and immunomodulating properties in granulysin-mediated diseases.

Design of an α-helical antimicrobial peptide with improved cell-selective and potent anti-biofilm activity

AR-23 is a melittin-related peptide with 23 residues. Like melittin, its high α-helical amphipathic structure results in strong bactericidal activity and cytotoxicity. In this study, a series of AR-23 analogues with low amphipathicity were designed by substitution of Ala1, Ala8 and Ile17 with positively charged residues (Arg or Lys) to study the effect of positively charged residue distribution on the biological viability of the antimicrobial peptide. Substitution of Ile17 on the nonpolar face with positively charged Lys dramatically altered the hydrophobicity, amphipathicity, helicity and the membrane-penetrating activity against human cells as well as the haemolytic activity of the peptide. However, substitution on the polar face only slightly affected the peptide biophysical properties and biological activity. The results indicate that the position rather than the number of positively charged residue affects the biophysical properties and selectivity of the peptide. Of all the analogues, A(A1R, A8R, I17K), a peptide with Ala1-Arg, Ala8-Arg and Ile17-Lys substitutions, exhibited similar bactericidal activity and anti-biofilm activity to AR-23 but had much lower haemolytic activity and cytotoxicity against mammalian cells compared with AR-23. Therefore, the findings reported here provide a rationalization for peptide design and optimization, which will be useful for the future development of antimicrobial agents.

Antimicrobial activity, improved cell selectivity and mode of action of short PMAP-36-derived peptides against bacteria and Candida

Antimicrobial peptides (AMPs) have recently attracted a great deal of attention as promising antibiotic candidates, but some obstacles such as toxicity and high synthesis cost must be addressed before developing them further. For developing short peptides with improved cell selectivity, we designed a series of modified PMAP-36 analogues. Antimicrobial assays showed that decreasing chain length in a certain range retained the high antimicrobial activity of the parental peptide and reduced hemolysis. The 18-mer peptide RI18 exhibited excellent antimicrobial activity against both bacteria and fungi, and its hemolytic activity was observably lower than PMAP-36 and melittin. The selectivity indexes of RI18 against bacteria and fungi were improved approximately 19-fold and 108-fold, respectively, compared to PMAP-36. In addition, serum did not affect the antibacterial activity of RI18 against E. coli but inhibited the antifungal efficiency against C. albicans. Flow cytometry and electron microscopy observation revealed that RI18 killed microbial cells primarily by damaging membrane integrity, leading to whole cell lysis. Taken together, these results suggest that RI18 has potential for further therapeutic research against frequently-encountered bacteria and fungi. Meanwhile, modification of AMPs is a promising strategy for developing novel antimicrobials to overcome drug-resistance.

Single Amino Acid Substitutions at Specific Positions of the Heptad Repeat Sequence of Piscidin-1 Yielded Novel Analogs That Show Low Cytotoxicity and In Vitro and In Vivo Antiendotoxin Activity

Piscidin-1 possesses significant antimicrobial and cytotoxic activities. To recognize the primary amino acid sequence(s) in piscidin-1 that could be important for its biological activity, a long heptad repeat sequence located in the region from amino acids 2 to 19 was identified. To comprehend the possible role of this motif, six analogs of piscidin-1 were designed by selectively replacing a single isoleucine residue at a d (5th) position or at an a (9th or 16th) position with either an alanine or a valine residue. Two more analogs, namely, I5F,F6A-piscidin-1 and V12I-piscidin-1, were designed for investigating the effect of interchanging an alanine residue at a d position with an adjacent phenylalanine residue and replacing a valine residue with an isoleucine residue at another d position of the heptad repeat of piscidin-1, respectively. Single alanine-substituted analogs exhibited significantly reduced cytotoxicity against mammalian cells compared with that of piscidin-1 but appreciably retained the antibacterial and antiendotoxin activities of piscidin-1. All the single valine-substituted piscidin-1 analogs and I5F,F6A-piscidin-1 showed cytotoxicity greater than that of the corresponding alanine-substituted analogs, antibacterial activity marginally greater than or similar to that of the corresponding alanine-substituted analogs, and also antiendotoxin activity superior to that of the corresponding alanine-substituted analogs. Interestingly, among these peptides, V12I-piscidin-1 showed the highest cytotoxicity and antibacterial and antiendotoxin activities. Lipopolysaccharide (12 mg/kg of body weight)-treated mice, further treated with I16A-piscidin-1, the piscidin-1 analog with the highest therapeutic index, at a single dose of 1 or 2 mg/kg of body weight, showed 80 and 100% survival, respectively. Structural and functional characterization of these peptides revealed the basis of their biological activity and demonstrated that nontoxic piscidin-1 analogs with significant antimicrobial and antiendotoxin activities can be designed by incorporating single alanine substitutions in the piscidin-1 heptad repeat.

Molecular Design, Structural Analysis and Antifungal Activity of Derivatives of Peptide CGA-N46

Chromogranin A (CGA)-N46, a derived peptide of human chromogranin A, has antifungal activity. To further research the active domain of CGA-N46, a series of derivatives were designed by successively deleting amino acid from both terminus of CGA-N46, and the amino acid sequence of each derivative was analyzed by bioinformatic software. Based on the predicted physicochemical properties of the peptides, including half-life time in mammalian reticulocytes (in vitro), yeast (in vivo) and E. coli (in vivo), instability index, aliphatic index and grand average of hydropathicity (GRAVY), the secondary structure, net charge, the distribution of hydrophobic residues and hydrophilic residues, the final derivatives CGA-N15, CGA-N16, CGA-N12 and CGA-N8 were synthesized by solid-phase peptide synthesis. The results of bioinformatic analysis showed that CGA-N46 and its derivatives were α-helix, neutral or weak positive charge, hydrophilic, and CGA-N12 and CGA-N8 were more stable than the other derivatives. The results of circular dichroism confirmed that CGA-N46 and its derived peptides displayed α-helical structure in an aqueous solution and 30 mM sodium dodecylsulfate, but α-helical contents decreased in hydrophobic lipid vesicles. CGA-N15, CGA-N16, CGA-N12 and CGA-N8 had higher antifungal activities than their mother peptide CGA-N46. Among of the derived peptides, CGA-N12 showed the least hemolytic activity. In conclusion, we have successfully identified the active domain of CGA-N46 with strong antifungal activity and weak hemolytic activity, which provides the possibility to develop a new class of antibiotics.

Biochemical and biophysical combined study of bicarinalin, an ant venom antimicrobial peptide

We have recently characterized bicarinalin as the most abundant peptide from the venom of the ant Tetramorium bicarinatum. This antimicrobial peptide is active against Staphylococcus and Enterobacteriaceae. To further investigate the antimicrobial properties of this cationic and cysteine-free peptide, we have studied its antibacterial, antifungal and antiparasitic activities on a large array of microorganisms. Bicarinalin was active against fifteen microorganisms with minimal inhibitory concentrations ranging from 2 and 25μmolL(-1). Cronobacter sakazakii, Salmonella enterica, Candida albicans, Aspergilus niger and Saccharomyces cerevisiae were particularly susceptible to this novel antimicrobial peptide. Resistant strains of Staphylococcus aureus, Pseudomonas aeruginosa and C. albicans were as susceptible as the canonical strains. Interestingly, bicarinalin was also active against the parasite Leishmania infantum with a minimal inhibitory concentrations of 2μmolL(-1). The bicarinalin pre-propeptide cDNA sequence has been determined using a combination of degenerated primers with RACE PCR strategy. Interestingly, the N-terminal domain of bicarinalin pre-propeptide exhibited sequence similarity with the pilosulin antimicrobial peptide family previously described in the Myrmecia venoms. Moreover, using SYTOX green uptake assay, we showed that, for all the tested microorganisms, bicarinalin acted through a membrane permeabilization mechanism. Two dimensional-NMR experiments showed that bicarinalin displayed a 10 residue-long α-helical structure flanked by two N- and C-terminal disordered regions. This partially amphipathic helix may explain the membrane permeabilization mechanism of bicarinalin observed in this study. Finally, therapeutic value of bicarinalin was highlighted by its low cytotoxicity against human lymphocytes at bactericidal concentrations and its long half-life in human serum which was around 15h.

The Central Hinge Link Truncation of the Antimicrobial Peptide Fowlicidin-3 Enhances Its Cell Selectivity without Antibacterial Activity Loss

Antimicrobial peptides (AMPs) have been paid considerable attention because of their broad-spectrum antimicrobial activity and a reduced possibility of the development of bacterial drug resistance. Fowlicidin-3 (Fow-3) is an identified type of chicken cathelicidin AMP that has exhibited considerable antimicrobial activity and cytotoxicity. To reduce cell toxicity and improve cell selectivity, several truncated peptides of fowlicidin-3, Fow-3(1-15), Fow-3(1-19), Fow-3(1-15-20-27), and Fow-3(20-27), were synthesized. Our results indicated that neither the N- nor C-terminal segment alone [Fow-3(1-15), Fow-3(1-19), Fow-3(20-27)] was sufficient to confer antibacterial activity. However, Fow-3(1-19) with the inclusion of the central hinge link (-AGIN-) retained substantial cell toxicity, which other analogs lost. Fow-3(1-15-20-27) displayed potent antimicrobial activity for a wide range of Gram-negative and Gram-positive bacteria and no obvious hemolytic activity or cytotoxicity. The central link region was shown to be critically important in the function of cell toxicity but was not relevant to antibacterial activity. Fow-3(1-15-20-27) maintained antibacterial activity in the presence of physiological concentrations of salts. The results from fluorescence spectroscopy, scanning electron microcopy, and transmission electron microcopy showed that Fow-3(1-15-20-27) as well as fowlicidin-3 killed bacterial cells by increasing membrane permeability and damaging the membrane envelope integrity. Fow-3(1-15-20-27) could be a promising antimicrobial agent for clinical application.

Role of the Cationic C-Terminal Segment of Melittin on Membrane Fragmentation

The widespread distribution of cationic antimicrobial peptides capable of membrane fragmentation in nature underlines their importance to living organisms. In the present work, we determined the impact of the electrostatic interactions associated with the cationic C-terminal segment of melittin, a 26-amino acid peptide from bee venom (net charge +6), on its binding to model membranes and on the resulting fragmentation. In order to detail the role played by the C-terminal charges, we prepared a melittin analogue for which the four cationic amino acids in positions 21-24 were substituted with the polar residue citrulline, providing a peptide with the same length and amphiphilicity but with a lower net charge (+2). We compared the peptide bilayer affinity and the membrane fragmentation for bilayers prepared from 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC)/1,2-dipalmitoyl-sn-glycero-3-phospho-l-serine (DPPS) mixtures. It is shown that neutralization of the C-terminal considerably increased melittin affinity for zwitterionic membranes. The unfavorable contribution associated with transferring the cationic C-terminal in a less polar environment was reduced, leaving the hydrophobic interactions, which drive the peptide insertion in bilayers, with limited counterbalancing interactions. The presence of negatively charged lipids (DPPS) in bilayers increased melittin binding by introducing attractive electrostatic interactions, the augmentation being, as expected, greater for native melittin than for its citrullinated analogue. The membrane fragmentation power of the peptide was shown to be controlled by electrostatic interactions and could be modulated by the charge carried by both the membrane and the lytic peptide. The analysis of the lipid composition of the extracted fragments from DPPC/DPPS bilayers revealed no lipid specificity. It is proposed that extended phase separations are more susceptible to lead to the extraction of a lipid species in a specific manner than a specific lipid-peptide affinity. The present work on the lipid extraction by melittin and citrullinated melittin with model membranes emphasizes the complex relation between the affinity, the lipid extraction/membrane fragmentation, and the lipid specificity.

Synthesis and biological evaluation of N-naphthoyl-phenylglyoxamide-based small molecular antimicrobial peptide mimics as novel antimicrobial agents and biofilm inhibitors

Antimicrobial peptides (AMPs) are a key component of the human immune system. Synthetic AMP mimics represent a novel strategy to counteract the increasing incidence of antimicrobial resistance. Here, we describe the synthesis of novel glyoxamide derivatives via ring-opening reactions of N-hexanoyl, N-benzoyl and N-naphthoylisatins with N,N-dimethylethane-1,2-diamine and N,N-dimethylpropane-1,3-diamine. These were converted to both the hydrochloric acid (HCl) or quaternary ammonium iodide (MeI) salts and their antibacterial activity against Staphylococcus aureus was investigated by their zone-of-inhibition and minimum inhibitory concentration (MIC). The HCl salt 22b exhibited the lowest MIC of 16 μg mL(-1), whereas the corresponding MeI salt 22c had a MIC of 39 μg mL(-1). We also investigated the in vitro toxicity of active compounds against the MRC-5 normal human lung fibroblasts and their activity against established biofilm in S. aureus.

Aryl-alkyl-lysines: Membrane-Active Small Molecules Active against Murine Model of Burn Infection

Infections caused by drug-resistant Gram-negative pathogens continue to be significant contributors to human morbidity. The recent advent of New Delhi metallo-β-lactamase-1 (blaNDM-1) producing pathogens, against which few drugs remain active, has aggravated the problem even further. This paper shows that aryl-alkyl-lysines, membrane-active small molecules, are effective in treating infections caused by Gram-negative pathogens. One of the compounds of the study was effective in killing planktonic cells as well as dispersing biofilms of Gram-negative pathogens. The compound was extremely effective in disrupting preformed biofilms and did not select resistant bacteria in multiple passages. The compound retained activity in different physiological conditions and did not induce any toxic effect in female Balb/c mice until concentrations of 17.5 mg/kg. In a murine model of Acinetobacter baumannii burn infection, the compound was able to bring the bacterial burden down significantly upon topical application for 7 days.

Calcium and Magnesium Ions Are Membrane-Active against Stationary-Phase Staphylococcus aureus with High Specificity

Staphylococcus aureus (S. aureus) is notorious for its ability to acquire antibiotic-resistance, and antibiotic-resistant S. aureus has become a wide-spread cause of high mortality rate. Novel antimicrobials capable of eradicating S. aureus cells including antibiotic-resistant ones are thus highly desired. Membrane-active bactericides and species-specific antimicrobials are two promising sources of novel anti-infective agents for fighting against bacterial antibiotic-resistance. We herein show that Ca²⁺ and Mg²⁺, two alkaline-earth-metal ions physiologically essential for diverse living organisms, both disrupt model S. aureus membranes and kill stationary-phase S. aureus cells, indicative of membrane-activity. In contrast to S. aureus, Escherichia coli and Bacillus subtilis exhibit unaffected survival after similar treatment with these two cations, indicative of species-specific activity against S. aureus. Moreover, neither Ca²⁺ nor Mg²⁺ lyses mouse red blood cells, indicative of hemo-compatibility. This works suggests that Ca²⁺ and Mg²⁺ may have implications in targeted eradication of S. aureus pathogen including the antibiotic-resistant ones.

Cyclic Tritrpticin Analogs with Distinct Biological Activities

Tritrpticin is a Trp-, Arg-, and Pro-rich cathelicidin peptide with promising antimicrobial activity. Cyclic analogs of tritrpticin were designed using two different approaches: circularization of the backbone by a head-to-tail peptide bond (TritrpCyc) or disulfide bridging between two Cys residues introduced at the termini of the peptide (TritrpDisu). Compared to the parent peptide, TritrpCyc has greatly improved therapeutic potential, showing stronger bactericidal activities and diminished hemolytic activity. Unexpectedly, the opposite effect was observed for TritrpDisu, which has lost its antimicrobial activity and is very hemolytic. In a membrane mimetic environment, NMR spectra show that TritrpDisu adopts an amphipathic turn-turn structure similar to linear tritrpticin. The structure of membrane-bound TritrpCyc has some similarity to that of TritrpDisu; however, the lipid interactions were not sufficient to restrain the structure of the former peptide in a single well-defined conformation. To help explain the distinct biological properties of the analogs, experiments investigating alternative antimicrobial targets were pursued: the membrane bilayer, lipopolysaccharides, and DNA. Although the hemolytic activity of TritrpDisu can be explained by the peptide's ability to induce higher leakage from the model mammalian membranes, TritrpCyc and TritrpDisu show no significant differences in these functional assays. Overall, our studies show that TritrpCyc holds great promise as a candidate for further development toward antimicrobial therapy.

Using adjuvants and environmental factors to modulate the activity of antimicrobial peptides

The increase in antibiotic resistant and multi-drug resistant bacterial infections has serious implications for the future of health care. The difficulty in finding both new microbial targets and new drugs against existing targets adds to the concern. The use of combination and adjuvant therapies are potential strategies to counter this threat. Antimicrobial peptides (AMPs) are a promising class of antibiotics (ABs), particularly for topical and surface applications. Efforts have been directed toward a number of strategies, including the use of conventional ABs combined with AMPs, and the use of potentiating agents to increase the performance of AMPs. This review focuses on combination strategies such as adjuvants and the manipulation of environmental variables to improve the efficacy of AMPs as potential therapeutic agents. This article is part of a Special Issue entitled: Antimicrobial peptides edited by Karl Lohner and Kai Hilpert.

Development of biomaterial surfaces with and without microbial nanosegments

Infections by microorganisms are a major problem in public health throughout the world. Artificial materials, including biomedical goods, inherently lack defense against microbial development. Therefore, microbial cells can adhere on any type of artificial surface, particularly in a moist environment, and start to multiply to form a huge population. In this review, we will discuss a strategy for designing antimicrobial polymers and antimicrobial surfaces. Generally, there are five types of antimicrobial polymers: (a) polymeric biocides, (b) biocidal polymers, (c) biocide-releasing polymers, (d) bioactive oligopeptides, and (e) antimicrobial surfaces. Antimicrobial surfaces preventing the growth of microorganisms are a promising method to inhibit the spread of microbial infections. The antimicrobial surfaces can reject the attachment of microbes and/or kill microbes in the vicinity and can be designed to kill microbes on contact. It is recommended that the material surface not release biocidal substances, therefore preventing exhaustion of biocide release to kill microbes. Furthermore, the antimicrobial surfaces are desired to be nontoxic to human cells. The development of contact-active antimicrobial surfaces by grafting antimicrobial nanosegments onto the material surface will be an important topic in the future.

Improved strategy for recombinant production and purification of antimicrobial peptide tachyplesin I and its analogs with high cell selectivity

Here, we report an efficient procedure for recombinant production and purification of tachyplesin I (THI) with a final yield of 17 mg/L of the culture medium. The peptide was expressed in Escherichia coli as a part of the thioredoxin fusion protein. With the use of soluble expression followed by immobilized metal-ion affinity chromatography, the recombinant protein cleavage and reversed-phase high-performance liquid chromatography, a yield of THI did not exceed 6.5 mg/L of the culture medium. Further optimization studies were carried out to improve the protein expression level and simplify purification procedure of the target peptide. To achieve better yield of the peptide, we used high-cell-density bacterial expression. The formed inclusion bodies were highly enriched with the fusion protein, which allowed us to perform direct chemical cleavage of the inclusion bodies solubilized in 6 M guanidine-HCl with subsequent selective precipitation of proteins with trifluoroacetic acid. This enabled us to avoid an extra step of purification by immobilized metal-ion affinity chromatography. The developed procedure has made it possible to obtain biologically active THI and was used for screening a number of its mutant analogs. As a result, several selective and nonhemolytic analogs were developed. Significant reduction in hemolytic activity without losing antimicrobial activity was achieved by substitution of tyrosine or isoleucine residue in the β-turn region of the molecule with hydrophilic serine. The present study affords further insight into molecular mechanism of antimicrobial action of tachyplesin and gains a better understanding of structure-activity relationships in its analogs. This is aimed at searching for novel antibiotics on the basis of antimicrobial peptides with reduced cytotoxicity.

Bioengineering and functional characterization of arenicin shortened analogs with enhanced antibacterial activity and cell selectivity

New bioengineering approaches are required for development of more active and less toxic antimicrobial peptides. In this study we used β-hairpin antimicrobial peptide arenicin-1 as a template for design of more potent antimicrobials. In particular, six shortened 17-residue analogs were obtained by recombinant expression in Escherichia coli. Besides, we have introduced the second disulfide bridge by analogy with the structure of tachyplesins. As a result, a number of analogs with enhanced activity and cell selectivity were developed. In comparison with arenicin-1, which acts on cell membranes with low selectivity, the most potent and promising its analog termed ALP1 possessed two-fold higher antibacterial activity and did not affect viability of mammalian cells at concentration up to 50 μM. The therapeutic index of ALP1 against both Gram-positive and Gram-negative bacteria was significantly increased compared with that of arenicin-1 while the mechanism of action remained the same. Like arenicin-1, the analog rapidly disrupt membranes of both stationary and exponential phase bacterial cells and effectively kills multidrug-resistant Gram-negative bacteria. Furthermore, ALP1 was shown to bind DNA in vitro at a ratio of 1:1 (w/w). The circular dichroism spectra demonstrated that secondary structures of the shortened analogs were similar to that of arenicin-1 in water solution, but significantly differed in membrane-mimicking environments. This work shows that a strand length is one of the key parameters affecting cell selectivity of β-hairpin antimicrobial peptides.

Designing α-helical peptides with enhanced synergism and selectivity against Mycobacterium smegmatis: Discerning the role of hydrophobicity and helicity

Recently, we reported on a series of short amphipathic α-helical peptides, comprising the backbone sequence (LLKK)2, with the ability to kill susceptible and drug-resistant Mycobacterium tuberculosis. In this study, the effect of key physicochemical parameters including hydrophobicity and helicity of α-helical peptides on anti-mycobacterial activity and synergism with rifampicin was investigated. The most hydrophobic analogue, W(LLKK)2W, displayed low selectivity against mycobacteria while peptides with intermediate hydrophobicity were shown to be equally active, yet significantly less toxic. Furthermore, proline substitution impeded the formation of stable amphipathic structures, rendering P(LLKK)2P as one of the least active analogues. Terminal capping with isoleucine was found to promote α-helical folding and the resultant peptide demonstrated the highest selectivity and minimal cytotoxicity against mammalian macrophages. Flow cytometric analysis revealed that enhancements in hydrophobicity and α-helicity increased the rate and extent of peptide-mediated membrane permeabilization. This finding corroborated the hypothesis that synergism between the peptides and rifampicin was likely mediated via peptide-induced pore formation. The rapid, concentration-dependent membrane depolarization, leakage of intracellular ATP and calcein release from PE/PG LUVs supported the membrane-lytic mechanism of action of the peptides. Together, these findings suggest that hydrophobicity and α-helicity significantly impact anti-mycobacterial activity and optimization of both parameters is necessary to develop synthetic analogues with superior selectivity indices and enhanced synergistic potential with conventional antibiotics.

STATEMENT OF SIGNIFICANCE

There is an urgent clinical need for the discovery of new antimicrobials, effective not just for drug susceptible, but also rapidly emerging drug-resistant TB. Recently, we reported on a series of short amphipathic α-helical peptides, comprising the backbone sequence (LLKK)2, with the ability to kill susceptible and drug-resistant M. tuberculosis. In this study, we evaluated a series of synthetic α-helical (LLKK)2 peptides over a range of hydrophobicities for their activity against mycobacteria and provide the first report on the modulating effect of hydrophobicity and α-helicity on the antimicrobial mechanisms of synthetic AMPs and their synergism with first-line antibiotics. These findings demonstrate the applicability of strategies employed here for the rational design of AMPs with the aim of improving cell selectivity and synergistic interactions when co-administered with first-line antibiotics in the fight against drug-resistant tuberculosis.

High specific selectivity and Membrane-Active Mechanism of the synthetic centrosymmetric α-helical peptides with Gly-Gly pairs

We used a template-assisted approach to develop synthetic antimicrobial peptides, which differ from naturally occurring antimicrobial peptides that can compromise host natural defenses. Previous researches have demonstrated that symmetrical distribution patterns of amino acids contribute to the antimicrobial activity of natural peptides. However, there is little research describing such design ideas for synthetic α-helical peptides. Therefore, here, we established a centrosymmetric α-helical sequence template (y + hhh + y)_n (h, hydrophobic amino acid; +, cationic amino acid; y, Gly or hydrophobic amino acid), which contributed to amphipathicity, and a series of centrosymmetric peptides was designed with pairs of small amino acids (Ala and Gly), which were utilized to modulate the biological activity. The centrosymmetric peptides with 3 repeat units exhibited strong antimicrobial activity; in particular, the Gly-rich centrosymmetric peptide GG3 showed stronger selectivity for gram-negative bacteria without hemolysis. Furthermore, beyond our expectation, fluorescence spectroscopy and electron microscopy analyses indicated that the GG3, which possessed poor α-helix conformation, dramatically exhibited marked membrane destruction via inducing bacterial membrane permeabilization, pore formation and disruption, even bound DNA to further exert antimicrobial activity. Collectively, the Gly-rich centrosymmetric peptide GG3 was an ideal candidate for commercialization as a clinical therapeutic to treat gram-negative bacterial infections.

Helical antimicrobial polypeptides with radial amphiphilicity

α-Helical antimicrobial peptides (AMPs) generally have facially amphiphilic structures that may lead to undesired peptide interactions with blood proteins and self-aggregation due to exposed hydrophobic surfaces. Here we report the design of a class of cationic, helical homo-polypeptide antimicrobials with a hydrophobic internal helical core and a charged exterior shell, possessing unprecedented radial amphiphilicity. The radially amphiphilic structure enables the polypeptide to bind effectively to the negatively charged bacterial surface and exhibit high antimicrobial activity against both gram-positive and gram-negative bacteria. Moreover, the shielding of the hydrophobic core by the charged exterior shell decreases nonspecific interactions with eukaryotic cells, as evidenced by low hemolytic activity, and protects the polypeptide backbone from proteolytic degradation. The radially amphiphilic polypeptides can also be used as effective adjuvants, allowing improved permeation of commercial antibiotics in bacteria and enhanced antimicrobial activity by one to two orders of magnitude. Designing AMPs bearing this unprecedented, unique radially amphiphilic structure represents an alternative direction of AMP development; radially amphiphilic polypeptides may become a general platform for developing AMPs to treat drug-resistant bacteria.

Lysine-Based Small Molecules That Disrupt Biofilms and Kill both Actively Growing Planktonic and Nondividing Stationary Phase Bacteria

The emergence of bacterial resistance is a major threat to global health. Alongside this issue, formation of bacterial biofilms is another cause of concern because most antibiotics are ineffective against these recalcitrant microbial communities. Ideal future antibacterial therapeutics should possess both antibacterial and anti-biofilm activities. In this study we engineered lysine-based small molecules, which showed not only commendable broad-spectrum antibacterial activity but also potent biofilm-disrupting properties. Synthesis of these lipophilic lysine-norspermidine conjugates was achieved in three simple reaction steps, and the resultant molecules displayed potent antibacterial activity against various Gram-positive (Staphylococcus aureus, Enterococcus faecium) and Gram-negative bacteria (Escherichia coli) including drug-resistant superbugs MRSA (methicillin-resistant S. aureus), VRE (vancomycin-resistant E. faecium), and β-lactam-resistant Klebsiella pneumoniae. An optimized compound in the series showed activity against planktonic bacteria in the concentration range of 3-10 μg/mL, and bactericidal activity against stationary phase S. aureus was observed within an hour. The compound also displayed about 120-fold selectivity toward both classes of bacteria (S. aureus and E. coli) over human erythrocytes. This rapidly bactericidal compound primarily acts on bacteria by causing significant membrane depolarization and K(+) leakage. Most importantly, the compound disrupted preformed biofilms of S. aureus and did not trigger bacterial resistance. Therefore, this class of compounds has high potential to be developed as future antibacterial drugs for treating infections caused by planktonic bacteria as well as bacterial biofilms.