Exposure to carbon nanotube material: assessment of nanotube cytotoxicity using human keratinocyte cells

Drug delivery: lessons to be learnt from Leishmania studies

Background Leishmaniasis is a disease caused by infection with the protozoan parasite Leishmania, which is responsible for three main types of disease: cutaneous leishmaniasis, visceral leishmaniasis and mucocutaneous leishmaniasis based to the site of infection for the particular species. This presents a major challenge to successful drug treatment, as a drug must not only reach antileishmanial concentrations in infected macrophages, the parasites' host cell, but also reach infected cells in locations specific to the type of disease. In this paper we discuss how studies using Leishmania have contributed to our knowledge on how drug delivery systems can be used to improve drug efficacy and delivery.

In vitro and in vivo biocompatibility of multi-walled carbon nanotube/biodegradable polymer nanocomposite for bone defects repair

Biomaterials are extensively used in bone defect recovery caused by bone diseases. Multi-walled carbon nanotubes have been reported to reinforce synthetic polymeric materials. The aim of the study is to test poly(3-hydroxybutyrate- co-3-hydroxyvalerate) loaded with different amounts of multi-walled carbon nanotubes to fabricate nanocomposites. Mechanical, mineralization, and degradation properties were studied in vitro. The proliferation and differentiation of rat bone marrow stem cells were studied to determine biocompatibility in vivo. The incorporation of multi-walled carbon nanotubes greatly increased the mechanical properties of poly(3-hydroxybutyrate- co-3-hydroxyvalerate) and the strongest composite obtained was at 2% multi-walled carbon nanotubes. The 2% nanocomposite also had higher rat bone marrow stem cell adhesion, proliferation, and differentiation characteristics compared to the pure poly(3-hydroxybutyrate- co-3-hydroxyvalerate). The apoptosis in the later stage of rat bone marrow stem cells decreased in the 2% nanocomposites group at different time points. Based on histology and micro-computed tomography tests 6 weeks after in vivo implantation, the 2% multi-walled carbon nanotubes/poly(3-hydroxybutyrate- co-3-hydroxyvalerate) treated animals had a higher volume of bone formation compared to the pure poly(3-hydroxybutyrate- co-3-hydroxyvalerate) group. Thus, the presence of multi-walled carbon nanotubes has an apparent positive effect on poly(3-hydroxybutyrate- co-3-hydroxyvalerate) in assisting osteogenesis.

The β-SiC nanowires (~100 nm) induce apoptosis via oxidative stress in mouse osteoblastic cell line MC3T3-E1

Silicon carbide (SiC), a compound of silicon and carbon, with chemical formula SiC, the beta modification ( β-SiC), with a zinc blende crystal structure (similar to diamond), is formed at temperature below 1700°C. β-SiC will be the most suitable ceramic material for the future hard tissue replacement, such as bone and tooth. The in vitro cytotoxicity of β-SiC nanowires was investigated for the first time. Our results indicated that 100 nm long SiC nanowires could significantly induce the apoptosis in MC3T3-E1 cells, compared with 100 μm long SiC nanowires. And 100 nm long SiC nanowires increased oxidative stress in MC3T3-E1 cells, as determined by the concentrations of MDA (as a marker of lipid peroxidation) and 8-OHdG (indicator of oxidative DNA damage). Moreover, transmission electron microscopy (TEM) was performed to evaluate the morphological changes of MC3T3-E1 cells. After treatment with 100 nm long SiC nanowires, the mitochondria were swelled and disintegrated, and the production of ATP and the total oxygen uptake were also decreased significantly. Therefore, β-SiC nanowires may have limitations as medical material.

Stealth nanotubes: strategies of shielding carbon nanotubes to evade opsonization and improve biodistribution

Carbon nanotubes (CNTs) have recently been in the limelight for their potential role in disease diagnostics and therapeutics, as well as in tissue engineering. Before these medical applications can be realized, there is a need to address issues like opsonization, phagocytosis by macrophages, and sequestration to the liver and spleen for eventual elimination from the body; along with equally important issues such as aqueous solubility, dispersion, biocompatibility, and biofunctionalization. CNTs have not been shown to be able to evade such biological obstacles, which include their nonspecific attachments to cells and other biological components in the bloodstream, before reaching target tissues and cells in vivo. This will eventually determine their longevity in circulation and clearance rate from the body. This review article discusses the current status, challenges, practical strategies, and implementations of coating CNTs with biocompatible and opsonin-resistant moieties, rendering CNTs transparent to opsonins and deceiving the innate immune response to make believe that the CNTs are not foreign. A holistic approach to the development of such "stealth" CNTs is presented, which encompasses not only several biophysicochemical factors that are not limited to surface treatment of CNTs, but also extraneous biological factors such as the protein corona formation that inevitably controls the in vivo fate of the particles. This review also discusses the present and potential applications, along with the future directions, of CNTs and their hybrid-based nanotheranostic agents for multiplex, multimodal molecular imaging and therapy, as well as in other applications, such as drug delivery and tissue engineering.

Effect of fiber length on carbon nanotube-induced fibrogenesis

Given their extremely small size and light weight, carbon nanotubes (CNTs) can be readily inhaled by human lungs resulting in increased rates of pulmonary disorders, particularly fibrosis. Although the fibrogenic potential of CNTs is well established, there is a lack of consensus regarding the contribution of physicochemical attributes of CNTs on the underlying fibrotic outcome. We designed an experimentally validated in vitro fibroblast culture model aimed at investigating the effect of fiber length on single-walled CNT (SWCNT)-induced pulmonary fibrosis. The fibrogenic response to short and long SWCNTs was assessed via oxidative stress generation, collagen expression and transforming growth factor-beta (TGF-β) production as potential fibrosis biomarkers. Long SWCNTs were significantly more potent than short SWCNTs in terms of reactive oxygen species (ROS) response, collagen production and TGF-β release. Furthermore, our finding on the length-dependent in vitro fibrogenic response was validated by the in vivo lung fibrosis outcome, thus supporting the predictive value of the in vitro model. Our results also demonstrated the key role of ROS in SWCNT-induced collagen expression and TGF-β activation, indicating the potential mechanisms of length-dependent SWCNT-induced fibrosis. Together, our study provides new evidence for the role of fiber length in SWCNT-induced lung fibrosis and offers a rapid cell-based assay for fibrogenicity testing of nanomaterials with the ability to predict pulmonary fibrogenic response in vivo.

Carbon nanotubes: an emerging drug carrier for targeting cancer cells

During recent years carbon nanotubes (CNTs) have been attracted by many researchers as a drug delivery carrier. CNTs are the third allotropic form of carbon-fullerenes which were rolled into cylindrical tubes. To be integrated into the biological systems, CNTs can be chemically modified or functionalised with therapeutically active molecules by forming stable covalent bonds or supramolecular assemblies based on noncovalent interactions. Owing to their high carrying capacity, biocompatibility, and specificity to cells, various cancer cells have been explored with CNTs for evaluation of pharmacokinetic parameters, cell viability, cytotoxicty, and drug delivery in tumor cells. This review attempts to highlight all aspects of CNTs which render them as an effective anticancer drug carrier and imaging agent. Also the potential application of CNT in targeting metastatic cancer cells by entrapping biomolecules and anticancer drugs has been covered in this review.

Tissue-specific direct microtransfer of nanomaterials into Drosophila embryos as a versatile in vivo test bed for nanomaterial toxicity assessment

Nanomaterials are the subject of intense research, focused on their synthesis, modification, and biomedical applications. Increased nanomaterial production and their wide range of applications imply a higher risk of human and environmental exposure. Unfortunately, neither environmental effects nor toxicity of nanomaterials to organisms are fully understood. Cost-effective, rapid toxicity assays requiring minimal amounts of materials are needed to establish both their biomedical potential and environmental safety standards. Drosophila exemplifies an efficient and cost-effective model organism with a vast repertoire of in vivo tools and techniques, all with high-throughput scalability and screening feasibility throughout its life cycle. Here we report tissue specific nanomaterial assessment through direct microtransfer into target tissues. We tested several nanomaterials with potential biomedical applications such as single-wall carbon nanotubes, multiwall carbon nanotubes, silver, gold, titanium dioxide, and iron oxide nanoparticles. Assessment of nanomaterial toxicity was conducted by evaluating progression through developmental morphological milestones in Drosophila. This cost-effective assessment method is amenable to high-throughput screening.

Recent advances in nerve tissue engineering

Nerve injury secondary to trauma, neurological disease or tumor excision presents a challenge for surgical reconstruction. Current practice for nerve repair involves autologous nerve transplantation, which is associated with significant donor-site morbidity and other complications. Previously artificial nerve conduits made from polycaprolactone, polyglycolic acid and collagen were approved by the FDA (USA) for nerve repair. More recently, there have been significant advances in nerve conduit design that better address the requirements of nerve regrowth. Innovations in materials science, nanotechnology, and biology open the way for the synthesis of new generation nerve repair conduits that address issues currently faced in nerve repair and regeneration. This review discusses recent innovations in this area, including the use of nanotechnology to improve the design of nerve conduits and to enhance nerve regeneration.

Perturbation of physiological systems by nanoparticles

Nanotechnology is having a tremendous impact on our society. However, societal concerns about human safety under nanoparticle exposure may derail the broad application of this promising technology. Nanoparticles may enter the human body via various routes, including respiratory pathways, the digestive tract, skin contact, intravenous injection, and implantation. After absorption, nanoparticles are carried to distal organs by the bloodstream and the lymphatic system. During this process, they interact with biological molecules and perturb physiological systems. Although some ingested or absorbed nanoparticles are eliminated, others remain in the body for a long time. The human body is composed of multiple systems that work together to maintain physiological homeostasis. The unexpected invasion of these systems by nanoparticles disturbs normal cell signaling, impairs cell and organ functions, and may even cause pathological disorders. This review examines the comprehensive health risks of exposure to nanoparticles by discussing how nanoparticles perturb various physiological systems as revealed by animal studies. The potential toxicity of nanoparticles to each physiological system and the implications of disrupting the balance among systems are emphasized.

Cellular uptake of nanoparticles as determined by particle properties, experimental conditions, and cell type

The increased application of nanoparticles (NPs) is increasing the risk of their release into the environment. Although many toxicity studies have been conducted, the environmental risk is difficult to estimate, because uptake mechanisms are often not determined in toxicity studies. In the present study, the authors review dominant uptake mechanisms of NPs in cells, as well as the effect of NP properties, experimental conditions, and cell type on NP uptake. Knowledge of NP uptake is crucial for risk assessment and is essential to predict the behavior of NPs based on their physical-chemical properties. Important uptake mechanisms for eukaryotic cells are macropinocytosis, receptor-mediated endocytosis, and phagocytosis in specialized mammalian cells. The studies reviewed demonstrate that uptake into nonphagocytic cells depends strongly on NP size, with an uptake optimum at an NP diameter of approximately 50 nm. Increasing surface charges, either positive or negative, have been shown to increase particle uptake in comparison with uncharged NPs. Another important factor is the degree of (homo-) aggregation. Results regarding shape have been ambiguous. Difficulties in the production of NPs, with 1 property changed at a time, call for a full characterization of NP properties. Only then will it be possible to draw conclusions as to which property affected the uptake.

Mechanisms of nanotoxicity: generation of reactive oxygen species

Nanotechnology is a rapidly developing field in the 21^st century, and the commercial use of nanomaterials for novel applications is increasing exponentially. To date, the scientific basis for the cytotoxicity and genotoxicity of most manufactured nanomaterials are not understood. The mechanisms underlying the toxicity of nanomaterials have recently been studied intensively. An important mechanism of nanotoxicity is the generation of reactive oxygen species (ROS). Overproduction of ROS can induce oxidative stress, resulting in cells failing to maintain normal physiological redox-regulated functions. This in turn leads to DNA damage, unregulated cell signaling, change in cell motility, cytotoxicity, apoptosis, and cancer initiation. There are critical determinants that can affect the generation of ROS. These critical determinants, discussed briefly here, include: size, shape, particle surface, surface positive charges, surface-containing groups, particle dissolution, metal ion release from nanometals and nanometal oxides, UV light activation, aggregation, mode of interaction with cells, inflammation, and pH of the medium.

Free radical scavenging and formation by multi-walled carbon nanotubes in cell free conditions and in human bronchial epithelial cells

Background

Certain multi-walled carbon nanotubes (MWCNTs) have been shown to elicit asbestos-like toxicological effects. To reduce needs for risk assessment it has been suggested that the physicochemical characteristics or reactivity of nanomaterials could be used to predict their hazard. Fibre-shape and ability to generate reactive oxygen species (ROS) are important indicators of high hazard materials. Asbestos is a known ROS generator, while MWCNTs may either produce or scavenge ROS. However, certain biomolecules, such as albumin – used as dispersants in nanomaterial preparation for toxicological testing in vivo and in vitro - may reduce the surface reactivity of nanomaterials.

Methods

Here, we investigated the effect of bovine serum albumin (BSA) and cell culture medium with and without BEAS 2B cells on radical formation/scavenging by five MWCNTs, Printex 90 carbon black, crocidolite asbestos, and glass wool, using electron spin resonance (ESR) spectroscopy and linked this to cytotoxic effects measured by trypan blue exclusion assay. In addition, the materials were characterized in the exposure medium (e.g. for hydrodynamic size-distribution and sedimentation rate).

Results

The test materials induced highly variable cytotoxic effects which could generally be related to the abundance and characteristics of agglomerates/aggregates and to the rate of sedimentation. All carbon nanomaterials were found to scavenge hydroxyl radicals (^•OH) in at least one of the solutions tested. The effect of BSA was different among the materials. Two types of long, needle-like MWCNTs (average diameter >74 and 64.2 nm, average length 5.7 and 4.0 μm, respectively) induced, in addition to a scavenging effect, a dose-dependent formation of a unique, yet unidentified radical in both absence and presence of cells, which also coincided with cytotoxicity.

Conclusions

Culture medium and BSA affects scavenging/production of ^•OH by MWCNTs, Printex 90 carbon black, asbestos and glass-wool. An unidentified radical is generated by two long, needle-like MWCNTs and these two CNTs were more cytotoxic than the other CNTs tested, suggesting that this radical could be related to the adverse effects of MWCNTs.

25th anniversary article: Chemically modified/doped carbon nanotubes & graphene for optimized nanostructures & nanodevices

Outstanding pristine properties of carbon nanotubes and graphene have limited the scope for real-life applications without precise controllability of the material structures and properties. This invited article to celebrate the 25th anniversary of Advanced Materials reviews the current research status in the chemical modification/doping of carbon nanotubes and graphene and their relevant applications with optimized structures and properties. A broad aspect of specific correlations between chemical modification/doping schemes of the graphitic carbons with their novel tunable material properties is summarized. An overview of the practical benefits from chemical modification/doping, including the controllability of electronic energy level, charge carrier density, surface energy and surface reactivity for diverse advanced applications is presented, namely flexible electronics/optoelectronics, energy conversion/storage, nanocomposites, and environmental remediation, with a particular emphasis on their optimized interfacial structures and properties. Future research direction is also proposed to surpass existing technological bottlenecks and realize idealized graphitic carbon applications.

Potential Occupational Risks Associated with Pulmonary Toxicity of Carbon Nanotubes

Given their remarkable properties, carbon nanotubes (CNTs) have made their way through various industrial and medicinal applications and the overall production of CNTs is expected to grow rapidly in the next few years, thus requiring an additional recruitment of workers. However, their unique applications and desirable properties are fraught with concerns regarding occupational exposure. The concern about worker exposure to CNTs arises from the results of recent animal studies. Short-term and sub-chronic exposure studies in rodents have shown consistent adverse health effects such as pulmonary inflammation, granulomas, fibrosis, genotoxicity and mesothelioma after inhalation or instillation of several types of CNTs. Furthermore, physicochemical properties of CNTs such as dispersion, functionalization and particle size can significantly affect their pulmonary toxicity. Risk estimates from animal studies necessitate implementation of protective measures to limit worker exposure to CNTs. Information on workplace exposure is very limited, however, studies have reported that CNTs can be aerosolized and attain respirable airborne levels during synthesis and processing activities in the workplace. Quantitative risk assessments from sub-chronic animal studies recommend the health-based need to reduce exposures below the recommended exposure limit of 1 µg/m³. Practice of prevention measures including the use of engineering controls, personal protective equipment, health surveillance program, safe handling and use, as well as worker training can significantly minimize worker exposure and improve worker health and safety.

Molecular modeling in structural nano-toxicology: interactions of nano-particles with nano-machinery of cells

Over the past two decades, nanotechnology has emerged as a key player in various disciplines of science and technology. Some of the most exciting applications are in the field of biomedicine - for theranostics (for combined diagnostic and therapeutic purposes) as well as for exploration of biological systems. A detailed understanding of the molecular interactions between nanoparticles and biological nano-machinery - macromolecules, membranes, and intracellular organelles - is crucial for obtaining adequate information on mechanisms of action of nanomaterials as well as a perspective on the long term effects of these materials and their possible toxicological outcomes. This review focuses on the use of structure-based computational molecular modeling as a tool to understand and to predict the interactions between nanomaterials and nano-biosystems. We review major approaches and provide examples of computational analysis of the structural principles behind such interactions. A rationale on how nanoparticles of different sizes, shape, structure and chemical properties can affect the organization and functions of nano-machinery of cells is also presented.

Reversible effects of vitamins C and E combination on oxidative stress-induced apoptosis in melamine-treated PC12 cells

Due to its high nitrogen content, melamine was deliberately added to raw milk for increasing the apparent protein content. Previous studies showed that melamine-induced apoptosis and oxidative damage on PC12 cells and rats' hippocampus. Several evidences suggested that vitamin antioxidant reduced oxidative stress and improved organic function. Whether treatments with antioxidant vitamins C or E, otherwise combination of them can attenuate oxidative stress after melamine administration remains to be elucidated. In this study, the reversible effects of vitamin antioxidants was investigated on melamine-induced neurotoxicity in cultured PC12 cells, an in vitro model of neuronal cells. When comparing vitamin C and E, the combination of both statistically increased PC12 cells viability. The results further showed that vitamin complex has effectively reduced the formation of reaction oxygen species, decreased the level of malondialdehyde, and elevated the activities of antioxidative enzymes. Hoechst 33342 staining and flow cytometric analysis of apoptosis showed that vitamin combination treatment effectively prevented PC12 cells from this melamine-induced apoptosis. It revealed the apoptotic nuclear features of the melamine-induced cell death. Additionally, a combination treatment of vitamins effectively inhibited apoptosis via blocking the increased activation of caspase-3. In summary, the vitamin E and C combination treatment could rescue PC12 cells from the injury induced by melamine through the downregulation of oxidative stress and prevention of melamine-induced apoptosis.

Baicalein Attenuates Oxidative Stress-Induced Expression of Matrix Metalloproteinase-1 by Regulating the ERK/JNK/AP-1 Pathway in Human Keratinocytes

The matrix metalloproteinase (MMP) family is involved in the breakdown of the extracellular matrix during normal physiological processes such as embryonic development, reproduction, and tissue remodeling, as well as in disease processes such as pathological aging, arthritis, and metastasis. Oxidative conditions generate reactive oxygen species (ROS) (e.g., hydrogen peroxide [H2O2]) in cells, which subsequently induce the synthesis of matrix metalloproteinase-1 (MMP-1). MMP-1, an interstitial collagenase, in turn stimulates an aging phenomenon. In this study, baicalein (5,6,7-trihydroxyflavone) was investigated for its in vitro activity against H2O2-induced damage using a human skin keratinocyte model. Baicalein pretreatment significantly inhibited H2O2-induced up-regulation of MMP-1 mRNA, MMP-1 protein expression and MMP-1 activity in cultured HaCaT keratinocytes. In addition, baicalein decreased the transcriptional activity of activator protein-1 (AP-1) and the expression of c-Fos and c-Jun, both components of the heterodimeric AP-1 transcription factor. Furthermore, baicalein reduced phosphorylation of extracellular signal-regulated kinase (ERK) and c-Jun-N-terminal kinase (JNK), which are upstream of the AP-1 transcription factor. The results of this study suggest that baicalein is involved in the inhibition of oxidative stress-induced expression of MMP-1 via inactivation of the ERK/JNK/AP-1 signaling pathway.

Carbon nanomaterials for nerve tissue stimulation and regeneration

Nanotechnology offers new perspectives in the field of innovative medicine, especially for reparation and regeneration of irreversibly damaged or diseased nerve tissues due to lack of effective self-repair mechanisms in the peripheral and central nervous systems (PNS and CNS, respectively) of the human body. Carbon nanomaterials, due to their unique physical, chemical and biological properties, are currently considered as promising candidates for applications in regenerative medicine. This chapter discusses the potential applications of various carbon nanomaterials including carbon nanotubes, nanofibers and graphene for regeneration and stimulation of nerve tissue, as well as in drug delivery systems for nerve disease therapy.

Properties that influence the specific surface areas of carbon nanotubes and nanofibers

Commercially available carbon nanotubes and nanofibers were analyzed to examine possible relationships between their Brunauer-Emmett-Teller specific surface areas (SSAs) and their physical and chemical properties. Properties found to influence surface area were number of walls/diameter, impurities, and surface functionalization with hydroxyl and carboxyl groups. Characterization by electron microscopy, energy-dispersive X-ray spectrometry, thermogravimetric analysis, and elemental analysis indicates that SSA can provide insight on carbon nanomaterials properties, which can differ vastly depending on synthesis parameters and post-production treatments. In this study, how different properties may influence surface area is discussed. The materials examined have a wide range of surface areas. The measured surface areas differed from product specifications, to varying degrees, and between similar products. Findings emphasize the multiple factors that influence surface area and mark its utility in carbon nanomaterial characterization, a prerequisite to understanding their potential applications and toxicities. Implications for occupational monitoring are discussed.

Lack of mutagenic effect by multi-walled functionalized carbon nanotubes in the somatic cells of Drosophila melanogaster

Carbon nanotubes (CNTs) are formed by rolling up a single graphite sheet into a tube. Among the different types of CNTs, the multi-walled carbon nanotubes (MWCNTs) comprise a set of concentric nanotubes with perfect structures. Several uses for MWCNTs have been suggested to be included in biological applications such as manufacturing of biosensors, carriers of drugs. However, before these materials can be put on the market, it is necessary to know their genotoxic effects. Thus, this study aims to evaluate the mutagenicity of multi-walled carbon nanotubes (MWCNTs) functionalized in somatic cells of Drosophila melanogaster, using the somatic mutation and recombination test (SMART). This assay detects the loss of heterozygosity of marker genes expressed phenotypically on the wings of the fly. Larvae of three days were used, resulting from ST cross, with basal levels of the cytochrome P450 and larvae of high metabolic bioactivity capacity (HB cross). They were treated with different concentrations of MWCNTs functionalized. The MH descendants, analyzed in both ST and HB crosses, had no significant effects on the frequency of mutant. Based on the results and on the experimental conditions mentioned in this study, it was concluded that MWCNTs were not mutagenic in D. melanogaster.

A novel genotoxicity assay of carbon nanotubes using functional macrophage receptor with collagenous structure (MARCO)-expressing chicken B lymphocytes

Although carbon nanotubes (CNTs) are promising nanomaterials, their potential carcinogenicity is a major concern. We previously established a genetic method of analyzing genotoxicity of chemical compounds, where we evaluated their cytotoxic effect on the DT40 lymphoid cell line comparing DNA-repair-deficient isogenic clones with parental wild-type cells. However, application of our DT40 system for the cytotoxic and genotoxic evaluation of nanomaterials seemed to be difficult, because DT40 cells only poorly internalized nanoparticles. To solve this problem, we have constructed a chimeric gene encoding a trans-membrane receptor consisting of the 5' region of the transferrin receptor (TR) gene (to facilitate internalization of nanoparticles) and the 3' region of the macrophage receptor with collagenous structure (MARCO) gene (which is a receptor for environmental particles). We expressed the resulting MARCO-TR chimeric receptor on DNA-repair-proficient wild-type cells and mutants deficient in base excision repair (FEN1 (-/-)) and translesion DNA synthesis (REV3 (-/-)). We demonstrated that the chimera mediates uptake of particles such as fluorescence-tagged polystyrene particles and multi-walled carbon nanotubes (MWCNTs), with very poor uptake of those particles by DT40 cells not expressing the chimera. MWCNTs were cytotoxic and this effect was greater in FEN1 (-/-)and REV3 (-/-) cells than in wild-type cells. Furthermore, MWCNTs induced greater oxidative damage (measured as 8-OH-dG formation) and a larger number of mitotic chromosomal aberrations in repair-deficient cells compared to repair-proficient cells. Taken together, our novel assay system using the chimeric receptor-expressing DT40 cells provides a sensitive method to screen for genotoxicity of CNTs and possibly other nanomaterials.

Mechanisms of nanoparticle-induced oxidative stress and toxicity

The rapidly emerging field of nanotechnology has offered innovative discoveries in the medical, industrial, and consumer sectors. The unique physicochemical and electrical properties of engineered nanoparticles (NP) make them highly desirable in a variety of applications. However, these novel properties of NP are fraught with concerns for environmental and occupational exposure. Changes in structural and physicochemical properties of NP can lead to changes in biological activities including ROS generation, one of the most frequently reported NP-associated toxicities. Oxidative stress induced by engineered NP is due to acellular factors such as particle surface, size, composition, and presence of metals, while cellular responses such as mitochondrial respiration, NP-cell interaction, and immune cell activation are responsible for ROS-mediated damage. NP-induced oxidative stress responses are torch bearers for further pathophysiological effects including genotoxicity, inflammation, and fibrosis as demonstrated by activation of associated cell signaling pathways. Since oxidative stress is a key determinant of NP-induced injury, it is necessary to characterize the ROS response resulting from NP. Through physicochemical characterization and understanding of the multiple signaling cascades activated by NP-induced ROS, a systemic toxicity screen with oxidative stress as a predictive model for NP-induced injury can be developed.

Multiwall carbon nano-onions induce DNA damage and apoptosis in human umbilical vein endothelial cells

Growing evidence has indicated the potential adverse effects on cardiovascular system of some nanomaterials, including fullerenes. In this study, we have evaluated the biological effects of multiwall carbon nano-onions (MWCNOs) (average size of 31.2 nm, ζ potential of 1.6 mV) on human umbilical vein endothelial cells (HUVECs). It was found that MWCNOs exhibited a dose-dependent inhibitory effect on cell growth; EC50 was 44.12 μg/mL. Thus, three concentrations were chosen (0.2, 1, and 5 μg/mL) for further experiments. Flow cytometry analysis revealed that 1 and 5 μg/mL MWCNOs could induce apoptosis in HUVECs, the apoptotic rates were 12% and 24% at 24 h after exposure. On the other hand, MWCNOs did not affect the cell cycle distribution during 24 h period. Using γH2AX foci formation as an indicator for DNA damage, it was shown that 5 μg/mL MWCNOs can induce γH2AX foci formation in HUVECs at 6, 12, and 24 h after treatment, whereas 0.2 μg/mL MWCNOs induced γH2AX foci formation only at 6 h after treatment. In addition, all three concentrations of MWCNOs induced the generation of reactive oxygen species (ROS), and inhibition of ROS generation can partially decrease the γH2AX foci formation induced by MWCNOs. Taken together, these data first suggested that MWCNOs can induce DNA damage and apoptosis in HUVECs, and that ROS might be involved in this process.

Disruption of Model Cell Membranes by Carbon Nanotubes

Carbon nanotubes (CNTs) have one of the highest production volumes among carbonaceous engineered nanoparticles (ENPs) worldwide and are have potential uses in applications including biomedicine, nanocomposites, and energy conversion. However, CNTs possible widespread usage and associated likelihood for biological exposures have driven concerns regarding their nanotoxicity and ecological impact. In this work, we probe the responses of planar suspended lipid bilayer membranes, used as model cell membranes, to functionalized multi-walled carbon nanotubes (MWCNT), CdSe/ZnS quantum dots, and a control organic compound, melittin, using an electrophysiological measurement platform. The electrophysiological measurements show that MWCNTs in a concentration range of 1.6 to 12 ppm disrupt lipid membranes by inducing significant transmembrane current fluxes, which suggest that MWCNTs insert and traverse the lipid bilayer membrane, forming transmembrane carbon nanotubes channels that allow the transport of ions. This paper demonstrates a direct measurement of ion migration across lipid bilayers induced by CNTs. Electrophysiological measurements can provide unique insights into the lipid bilayer-ENPs interactions and have the potential to serve as a preliminary screening tool for nanotoxicity.

Physical properties of single-wall carbon nanotubes in cell culture and their dispersal due to alveolar epithelial cell response

Concern over the influence of carbon nanotubes (CNTs) on human health has arisen due to advances; however, little is known about the potential toxicity of CNTs. In this study, impurity-free single-wall carbon nanotubes (SWCNTs), with different physical properties in cell culture medium, were prepared by a novel dispersion procedure. SWCNTs with small bundles (short linear shape) and SWCNTs with large bundles (long linear shape) did not cause a significant inhibition of cell proliferation, induction of apoptosis or arrest of cell cycle progression in A549 alveolar epithelial cells. Expression of many genes involved in the inflammatory response, apoptosis, response to oxidative stress and degradation of the extracellular matrix were not markedly upregulated or downregulated. However, SWCNTs with relatively large bundles significantly increased the level of intracellular reactive oxygen species (ROS) in a dose-dependent manner, and the levels of these ROS were higher than those of SWCNTs with relatively small bundles or commercial SWCNTs with residual metals. Transmission electron microscopy (TEM) revealed that impurity-free SWCNTs were observed in the cytoplasm and vacuoles of cells after 24 h. These results suggested that the physical properties, especially the size and length of the bundles of the SWCNTs dispersed in cell culture medium, contributed to a change in intracellular ROS generation, even for the same bulk SWCNTs. Additionally, the residual metals associated with the manufacturing of SWCNTs may not be a definitive parameter for intracellular ROS generation in A549 cells.

Chemical mechanisms of the toxicological properties of nanomaterials: generation of intracellular reactive oxygen species

As more and more nanomaterials with novel physicochemical properties or new functions are created and used in different research fields and industrial sectors, the scientific and public concerns about their toxic effects on human health and the environment are also growing quickly. In the past decade, the study of the toxicological properties of nanomaterials/nanoparticles has formed a new research field: nanotoxicology. However, most of the data published relate to toxicological phenomena and there is less understanding of the underlying mechanism for nanomaterial-induced toxicity. Nanomaterial-induced reactive oxygen species (ROS) play a key role in cellular and tissue toxicity. Herein, we classify the pathways for intracellular ROS production by nanomaterials into 1) the direct generation of ROS through nanomaterial-catalyzed free-radical reactions in cells, and 2) the indirect generation of ROS through disturbing the inherent biochemical equilibria in cells. We also discuss the chemical mechanisms associated with above pathways of intracellular ROS generation, from the viewpoint of the high reactivity of atoms on the nanosurface. We hope to aid in the understanding of the chemical origin of nanotoxicity to provide new insights for chemical and material scientists for the rational design and creation of safer and greener nanomaterials.

Investigation of acute effects of graphene oxide on wastewater microbial community: a case study

The market for graphene-based products, such as graphene oxide (GO), is projected to reach nearly $675 million by 2020, hence it is expected that large quantities of graphene-based wastes will be generated by then. Wastewater treatment plants will be one of the ultimate repositories for these wastes. Efficient waste treatment relies heavily on the functions of diverse microbial communities. Therefore, systematic investigation of any potential toxic effects of GO in wastewater microbial communities is essential to determine the potential adverse effects and the fate of these nanomaterials in the environment. In the present study, we investigate the acute toxicity, i.e. short-term and high load, effect of GO on the microbial functions related to the biological wastewater treatment process. The results showed that toxic effects of GO on microbial communities were dose dependent, especially in concentrations between 50 and 300mg/L. Bacterial metabolic activity, bacterial viability, and biological removal of nutrients, such as organics, nitrogen and phosphorus, were significantly impacted by the presence of GO in the activated sludge. Furthermore, the presence of GO deteriorated the final effluent quality by increasing the water turbidity and reducing the sludge dewaterability. Microscopic techniques confirmed penetration and accumulation of GO inside the activated sludge floc matrix. Results demonstrated that the interaction of GO with wastewater produced significant amount of reactive oxygen species (ROS), which could be one of the responsible mechanisms for the toxic effect of GO.

Fibril-mediated oligomerization of pilin-derived protein nanotubes

BACKGROUND

Self-assembling protein nanotubes (PNTs) are an intriguing alternative to carbon nanotubes for applications in bionanotechnology, in part due to greater inherent biocompatibility. The type IV pilus of the gram negative bacteria Pseudomonas aeruginosa is a protein-based fibre composed of a single subunit, the type IV pilin. Engineered pilin monomers from P. aeruginosa strain K122-4 (ΔK122) have been shown to oligomerize into PNTs both in solution and at surfaces. In order to fully exploit PNTs in bionanotechonological settings, an in-depth understanding of their assembly, physical characteristics and robustness, both in solution and when constrained to surfaces, is required.

RESULTS

This study details the effectiveness of multiple initiators of ΔK122-derived PNT oligomerization and characterize the formation of PNTs in solution. The optimal initiator for the oligomerization of ΔK122 in solution was observed to be 2-methyl-2,4-pentanediol (MPD). Conversely, larger PEG molecules do not trigger oligomerization. Multi-angle light scattering analysis indicates that the pilin protein exists in a monomer-dimer equilibrium in solution, and that an intermediate species forms within three hours that then coalesces over time into high molecular weight PNTs. Transmission Electron Microscopic analysis was used to observe the formation of oligomerized ΔK122 fibrils prior to assembly into full-length PNTs.

CONCLUSIONS

The oligomerization of ΔK122 pilin derived PNTs is a fibril mediated process. The optimal trigger for PNT oligomerization in solution is MPD, and the observation that PEGs do not induce oligomerization may enable the oligomerization of pilin-derived PNTs on PEG-functionalized surfaces for implantable bionanodevices.

Role of surface charge and oxidative stress in cytotoxicity and genotoxicity of graphene oxide towards human lung fibroblast cells

Recently, attempts have been made to apply graphene oxide (GO) in the field of biology and medicine, such as DNA sensing and drug delivery with some necessary modifications. Therefore, the toxicity of GO must be evaluated before it is applied further in biomedicine. In this paper, the cytotoxicity and genotoxicity of GO to human lung fibroblast (HLF) cells have been assessed with methyl thiazolyl tetrazolium (MTT), sub-G1 measurement and comet assays, and the mechanism of its toxicity has been explored. Various modifications of GO have been made to help us determine the factors which could affect the toxicity of GO. The results indicated that cytotoxicity and genotoxicity of GO to HLF cells were concentration dependent, and the genotoxicity induced by GO was more severe than the cytotoxicity to HLF cells. Oxidative stress mediated by GO might explain the reason of its toxic effect. Furthermore, the electronic charge on the surface of GO would play a very important role in the toxicity of GO to HLF cells.

Biocompatible multi-walled carbon nanotube-chitosan-folic acid nanoparticle hybrids as GFP gene delivery materials

Carbon nanotube (CNT) is one of the inorganic delivery systems that show great potential for optimal biomolecule transporting. Concerning the preparation of CNT-based delivery vectors, it is very important to understand the internal relations of physical properties and surface functionalization of CNTs with the transfection efficiency and cytotoxicity. In this paper, the multi-walled CNTs (MWCNTs) of different length were functionalized with chitosan-folic acid nanoparticles (CS-FA NPs) by ionotropic gelation process. The micromorphologies, surface functional groups, and zeta potential of the MWCNT-CS-FA NPs were characterized. The effects of nanotube length and surface functionalization with CS-FA NPs on the gene transfection efficiency and cytotoxicity were investigated in detail. The non-functionalized MWCNTs and MWCNT-CS-FA NPs all can deliver the plasmid DNA of enhanced green fluorescent protein (pEGFP-N1) into HeLa and MCF-7 cells and the exogenous GFP gene has been expressed. The nanotube length shows a compromise influence on the transfection and cytotoxicity properties of MWCNTs. Having greater gene transfection ability, however, the shorter MWCNTs exhibit larger cytotoxicity than the longer ones. Moreover, the surface functionalization of MWCNTs with CS-FA NPs improves the transfection efficiency and decreases the cytotoxicity as well. Under optimal conditions, the pEGFP-N1 transfection efficiency of MWCNT-CS-FA NPs is about 4.1%, being 1.5 times as large as that of the non-functionalized MWCNTs. The MWCNT-CS-FA NPs show little effect on the cellular viability when the concentration is up to 250 μg mL(-1). By optimal length control and surface functionalization, MWCNTs should have good applications in gene delivery vectors.

Immobilized MWCNT support osteogenic cell culture

The broad use of versatile, strong, lightweight multi-walled carbon nanotubes (MWCNT) for use in biomaterial applications is tempered by ongoing debate about their safety. Recent reports suggest that factors such as their diameter and surface coating affect their function and cytotoxicity. The cell culture surfaces used in the current study were made of MWCNT immobilized in a high-density polyethylene substrate, differentiating it from most studies of MWCNT cytotoxicity. The purity, chemical functionalization, and immobilization of MWCNT were evaluated to elucidate their effect on MWCNT behavior relative to controls. While purity was found not to be significant in determining the behavior of cells on MWCNT relative to standard controls, the presence of carboxyl functional groups was generally associated with reduced cell metabolic activity, proliferation, and differentiation as measured using the MTS assay, nucleic acid incorporation, and alkaline phosphatase expression, respectively. This study demonstrates that the culture of osteogenic cells on surfaces made of nonfunctionalized and immobilized MWCNT is associated with a level of cell growth and differentiation comparable to those of standard tissue culture controls.

Short multiwall carbon nanotubes promote neuronal differentiation of PC12 cells via up-regulation of the neurotrophin signaling pathway

Numerous unique properties of carbon nanotubes make them attractive for applications in neurobiology such as drug delivery, tissue regeneration, and as scaffolds for neuronal growth. In this study, the critical roles of the length of multiwall carbon nanotubes (MWCNTs) on a neuronal-like model cell line PC12 cells are investiaged. Incubation of PC12 cells with carboxylated MWCNTs did not significantly affect cellular morphology and viability at lower concentrations. Short MWCNTs show higher cellular uptake and more obvious removal compared to longer ones, which can result in higher ability to promote PC12 cell differentiation. Pre-incubation of short MWCNTs can up-regulate the expression of neurotrophin signaling pathway-associated TrkA/p75 receptors and Pincher/Gap43/TH proteins, which might be the underlying mechanism for the improved differentiation in PC12 cells. The current results provide insight for future applications of MWCNTs in neuron drug delivery and neurodegenerative disease treatment.