Effect of Bioactive Glasses on Angiogenesis: A Review of In Vitro and In Vivo Evidences

Bioactive calcium phosphate-based glasses and ceramics and their biomedical applications: A review

An overview of the formation of calcium phosphate under in vitro environment on the surface of a range of bioactive materials (e.g. from silicate, borate, and phosphate glasses, glass-ceramics, bioceramics to metals) based on recent literature is presented in this review. The mechanism of bone-like calcium phosphate (i.e. hydroxyapatite) formation and the test protocols that are either already in use or currently being investigated for the evaluation of the bioactivity of biomaterials are discussed. This review also highlights the effect of chemical composition and surface charge of materials, types of medium (e.g. simulated body fluid, phosphate-buffered saline and cell culture medium) and test parameters on their bioactivity performance. Finally, a brief summary of the biomedical applications of these newly formed calcium phosphate (either in the form of amorphous or apatite) is presented.

PHBV/bioglass composite scaffolds with co-cultures of endothelial cells and bone marrow stromal cells improve vascularization and osteogenesis for bone tissue engineering

PHBV + 10% BG composite scaffolds stimulated osteogenic differentiation and angiogenic differentiation of co-cultures of HBMSCs and HUVECs by enhancing paracrine effects between the two types of cells.

Biomedical applications of natural-based polymers combined with bioactive glass nanoparticles

The combination of natural polymers with nanoparticles allowed the development of functional bioinspired constructs. This review discusses the composition, design, and applications of bioinspired nanocomposite constructs based on bioactive glass nanoparticles (BGNPs).

Combined biomaterial signals stimulate communications between bone marrow stromal cell and endothelial cell

Combined chemical and structural signals of biomaterials stimulate communications between bone marrow stromal cell and endothelial cell.

A mini review focused on the proangiogenic role of silicate ions released from silicon-containing biomaterials

Angiogenesis is considered an important issue in the development of biomaterials for the successful regeneration of tissues including bone. While growth factors are commonly used with biomaterials to promote angiogenesis, some ions released from biomaterials can also contribute to angiogenic events. Many silica-based biomaterials have been widely used for the repair and regeneration of tissues, mainly hard tissues such as bone and tooth structure. They have shown excellent performance in bone formation by stimulating angiogenesis. The release of silicate and others (Co and Cu ions) has therefore been implicated to play critical roles in the angiogenesis process. In this short review, we highlight the in vitro and in vivo findings of angiogenesis (and the related bone formation) stimulated by the various types of silicon-containing biomaterials where silicate ions released might play essential roles. We discuss further the possible molecular mechanisms underlying in the ion-induced angiogenic events.

Bioglass promotes wound healing through modulating the paracrine effects between macrophages and repairing cells

Bioglass stimulates macrophages to switch to the M2 phenotype and modulates the paracrine effects between macrophages and repairing cells.

Antibacterial and anticancerous drug loading kinetics for (10-x)CuO-xZnO-20CaO-60SiO2-10P2O5 (2 ≤ x ≤ 8) mesoporous bioactive glasses

In the present study, antibacterial and anticancerous drug loading kinetics for the (10-x)CuO-xZnO-20CaO-60SiO₂-10P₂O₅ (2≤x≤8, varying in steps of 2) mesoporous bioactive glasses (MBGs) have been studied. XRD analysis of the as prepared glass samples proved its amorphous nature. Scanning electron microscopy (SEM) revealed the apatite layer formation on the surface of the MBGs after soaking for 15 days in SBF. Ion dissolution studies of calcium, phosphorous and silicon have been performed using inductively coupled plasma (ICP). FTIR and Raman analysis depicted about the presence of various bonds and groups present in the glasses. The pore size of MBGs lies in the range of 4.2-9.7 nm. Apart from this, specific surface area of the MBGs varied from 263 to 402 cm²/g. The MBGs were loaded with Doxorubicin (DOX), Vancomycin (VANCO) and Tetracycline (TETRA) drugs among which, the decreasing copper content influenced the loading properties of doxorubicin and tetracycline drugs. Vancomycin was fully loaded almost in all the MBGs, whereas other drugs depicted varying loading with respect to the copper content.

A patterned nanocomposite membrane for high-efficiency healing of diabetic wound

A bioactive glass/patterned electrospun membrane (BG/PEM) with uniform nanostructure could stimulate angiogenesis and accelerate diabetic wound healing with high efficiency.

Synthesis of novel quaternary silica hybrid bioactive microspheres

PURPOSE

To survey the preparation of novel hybrid microspheres of quaternary silicate glassy composition (SiO₂ P₂ O₅ CaONa₂ O) and the prospect of using them as an osteogenic system with enhanced bioactive properties for the development of hydroxyapatite.

METHOD

In line with our previous synthetic procedure a two-step process was followed, wherein polystyrene (PS) microspheres were prepared by the emulsifier free-emulsion polymerization method and constituted the core for the sol-gel coating of the silicate inorganic shell. The development of the hybrid microspheres was based on silane and phosphate precursors and was assesses at different ratio of ethanol/water (of 9/1, 4/1, and 2/1, in mL) and at varied ammonia concentration of 4.8-1.0 mL.

RESULTS

The hybrid microspheres had an average size ranged between 350 and 550 nm according to SEM, depending on the ethanol/water solution rate and ammonia content. The final microspheres probably exhibited a porous-like structure through the formation of diffused voids along with the low carbon content of the EDX analysis, which could be regulated by the catalyst content. The hybrid microspheres exhibited effective in vitro bioactivity assessed in simulated body fluids (SBF).

CONCLUSION

Quaternary hybrid silica microspheres were effectively synthesized. The bioassay evaluation of the final microspheres revealed the rapid in vitro formation of a bone-like apatite layer. The results verify the bioactivity of the microspheres and promote further research of their suitability on regenerative treatment of bone abnormalities. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 112-120, 2018.

Characterization and angiogenic potential of xenogeneic bone grafting materials: Role of periodontal ligament cells

Adequate revascularization is a prerequisite for successful healing of periodontal bone defects. This study characterized three different xenogeneic bone grafting materials: Gen-Os of equine and porcine origins, and anorganic Bio-Oss. We also investigated their angiogenic potential. All materials were composed of poorly crystalline calcium oxide phosphate, with Bio-Oss exhibiting a carbonated phase and larger particle size and both Gen-Os showing the presence of collagen. Both Gen-Os materials significantly enhanced vascular endothelial growth factor (VEGF) secretion by PDL cells. A significant increase in endothelial cell proliferation was observed in cultures with both Gen-Os conditioned media, but not with that of Bio-Oss. Finally, angiogenesis was stimulated by both Gen-Os conditioned media as demonstrated by an increased formation of capillary-like structures. Taken together, these findings indicate an enhanced angiogenic potential of both Gen-Os bone grafting materials when applied on PDL cells, most likely by increasing VEGF production.

Evaluation of the osteogenesis and angiogenesis effects of erythropoietin and the efficacy of deproteinized bovine bone/recombinant human erythropoietin scaffold on bone defect repair

Erythropoietin (EPO) could promote the angiogenesis and may also play a role in bone regeneration. This study was conducted to evaluate the osteogenesis and angiogenesis effects of EPO and the efficacy of deproteinized bovine bone/recombinant human EPO scaffold on bone defect repair. Twenty-four healthy adult goats were chosen to build goat defects model and randomly divided into four groups. The goats were treated with DBB/rhEPO scaffolds (group A), porous DBB scaffolds (group B), autogenous cancellous bone graft (group C), and nothing (group D). Animals were evaluated with radiological and histological methods at 4, 8 and 12 weeks after surgery. The grey value of radiographs was used to evaluate the healing of the defects and the outcome revealed that the group A had a better outcome of defect healing compared with group B (P < 0.05). However, the grey values in group A were lower than group C at week 4 and week 8 (P < 0.05), but at week 12 their difference had no statistical significance (P > 0.05). The newly formed bone area was calculated from histological sections and the results demonstrated that the amount of new bone in group A increased significantly compared with that in group B (P < 0.05) but was inferior to that in group C (P > 0.05) at 4, 8, 12 weeks respectively. In addition, the expression of vascular endothelial growth factor (VEGF) by immunohistochemical testing and real-time polymerase chain reaction at 12 weeks in group A was significantly higher than that in group B (P < 0.05), and also better than that in group C at week 4 and week 8 (P < 0.05), but at week 12 their difference had no statistical significance (P > 0.05). Therefore, EPO has significant effects on bone formation and angiogenesis, and has capacity to promote the repair of bone defects. It is worthy of being recommended to further studies.

Acellular hydroxyapatite-collagen scaffolds support angiogenesis and osteogenic gene expression in an ectopic murine model: Effects of hydroxyapatite volume fraction

Acellular hydroxyapatite (HA) reinforced collagen scaffolds were previously reported to induce angiogenesis and osteogenesis after ectopic implantation but the effect of the HA volume fraction was not investigated. Therefore, the objective of this study was to investigate the effect of HA volume fraction on in vivo angiogenesis and osteogenesis in acellular collagen scaffolds containing 0, 20, and 40 vol % HA after subcutaneous ectopic implantation for up to 12 weeks in mice. Endogenous cell populations were able to completely and uniformly infiltrate the entire scaffold within 6 weeks independent of the HA content, but the cell density was increased in scaffolds containing HA versus collagen alone. Angiogenesis, remodeling of the original scaffold matrix, mineralization, and osteogenic gene expression were evident in scaffolds containing HA, but were not observed in collagen scaffolds. Moreover, HA promoted a dose-dependent increase in measured vascular density, cell density, matrix deposition, and mineralization. Therefore, the results of this study suggest that HA promoted the recruitment and differentiation of endogenous cell populations to support angiogenic and osteogenic activity in collagen scaffolds after subcutaneous ectopic implantation. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 2178-2188, 2016.

Preparation of copper-containing bioactive glass/eggshell membrane nanocomposites for improving angiogenesis, antibacterial activity and wound healing

Effectively stimulating angiogenesis and avoiding wound infection are great challenges in wound care management. Designing new healing dressings with requisite angiogenic capacity and antibacterial performance is of particular significance. In order to achieve this aim, we prepared a copper (Cu)-containing bioactive glass nanocoating (40-50nm) with uniform nanostructure on natural eggshell membrane (Cu-BG/ESM) by the pulsed laser deposition (PLD) technique. The surface physicochemical properties including hydrophilicity and hardness of ESM were significantly improved after depositing Cu-BG nanocoatings. Meanwhile, 5Cu-BG/ESM films containing 5mol% Cu stimulated proangiogenesis by improving vascular endothelial growth factor (VEGF) and hypoxia-inducible factor (HIF)-1α protein secretion as well as angiogenesis-related gene expression (VEGF, HIF-1α, VEGF receptor 2 (KDR) and endothelial nitric oxide (eNos)) of human umbilical vein endothelial cells (HUVECs). When used to treat full-thickness skin defects in mice, 5Cu-BG/ESM films enhanced the healing quality as confirmed by the significantly improved angiogenesis (as indicated by CD31 expression) and formation of continuous and uniform epidermis layer in vivo. Furthermore, 5Cu-BG/ESM films could maintain a sustained release of Cu(2+) ions and distinctly inhibited the viability of bacteria (Escherichia coli). The results indicate that Cu(2+) ions released from Cu-BG/ESM nanocomposite films play an important role for improving both angiogenesis and antibacterial activity and the prepared nanocomposite films combined Cu-containing BG nanocoatings with ESM are a promising biomaterial for wound healing application.

STATEMENT OF SIGNIFICANCE

Designing new healing dressings with requisite angiogenic capacity and antibacterial performance is of particular significance in wound care management. In our study, we successfully prepared copper-containing bioactive glass/eggshell membrane (Cu-BG/ESM) nanocomposites with uniform bioactive glass nanocoatings by using pulsed laser deposition (PLD) technology. Due to the deposited Cu-BG nanocoatings on the surface of ESM, Cu-BG/ESM nanocomposites possessed significantly improved physicochemical and biological properties, including surface hydrophilicity, hardness, antibacterial ability, angiogenesis rate in vitro and wound healing quality in vivo as compared to pure ESM and BG/ESM films. Our study showed that prepared nanocoatings on Cu-BG/ESM nanocomposites offer a beneficial carrier for sustained release of Cu(2+) ions which played a key role for improving both angiogenesis and antibacterial activity. The prepared nanocomposites combined Cu-containing BG nanocoatings with ESM are a promising biomaterial for wound healing application.

Third generation poly(hydroxyacid) composite scaffolds for tissue engineering

Bone tissue engineering based on scaffolds is quite a complex process as a whole gamut of criteria needs to be satisfied to promote cellular attachment, proliferation and differentiation: biocompatibility, right surface properties, adequate mechanical performance, controlled bioresorbability, osteoconductivity, angiogenic cues, and vascularization. Third generation scaffolds are more of composite types to maximize biological-mechanical-chemical properties. In the present review, our focus is on the performance of micro-organism-derived polyhydroxyalkanoates (PHAs)-polyhydroxybutyrate (PHB) and polyhydroxybutyrate-co-valerate (PHBV)-composite scaffolds with ceramics and natural polymers for tissue engineering applications with emphasis on bone tissue. We particularly emphasize on how material properties of the composites affect scaffold performance. PHA-based composites have demonstrated their biocompatibility with a range of tissues and their capacity to induce osteogenesis due to their piezoelectric properties. Electrospun PHB/PHBV fiber mesh in combination with human adipose tissue-derived stem cells (hASCs) were shown to improve vascularization in engineered bone tissues. For nerve and skin tissue engineering applications, natural polymers such as collagen and chitosan remain the gold standard but there is scope for development of scaffolds combining PHAs with other natural polymers which can address some of the limitations such as brittleness, lack of bioactivity and slow degradation rate presented by the latter. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 1667-1684, 2017.

Nanoscale bioactive glass activates osteoclastic differentiation of RAW 264.7 cells

BACKGROUND

There is limited knowledge regarding differentiation of osteoclasts in the presence of nanoscale bioactive glass (nBG). This investigation examined increasing concentrations of 45S5 nBG and their influence on osteoclast differentiation.

MATERIALS & METHODS

Different concentrations of 45S5 nBG were cultured up to 14 days with the murine RAW264.7 cell line and human primary monocytes cultured with M-CSF and RANKL.

RESULTS

Culturing cells for 14 days with 500 μg/ml nBG showed a viability of 100%; however DNA synthesis was reduced, supporting differentiation into osteoclast-like cells. Using RAW cells, activation of nine genes, including cell fusion genes, occurred in an nBG concentration dependent manner. Low concentrations of nBG increased expression of genes involved in commitment to cell fusion, whereas high concentrations increased gene expression supporting osteoclast-like differentiation.

CONCLUSION

nBG enhances both RAW264.7 and human osteoclast differentiation. nBG controlled gene expression in a concentration dependent manner could reflect normal regulation during bone growth.

Bioactivity and Mechanical Stability of 45S5 Bioactive Glass Scaffolds Based on Natural Marine Sponges

Bioactive glass (BG) based scaffolds (45S5 BG composition) were developed by the replica technique using natural marine sponges as sacrificial templates. The resulting scaffolds were characterized by superior mechanical properties (compression strength up to 4 MPa) compared to conventional BG scaffolds prepared using polyurethane (PU) packaging foam as a template. This result was ascribed to a reduction of the total scaffold porosity without affecting the pore interconnectivity (>99%). It was demonstrated that the reduction of total porosity did not affect the bioactivity of the BG-based scaffolds, tested by immersion of scaffolds in simulated body fluid (SBF). After 1 day of immersion in SBF, a homogeneous CaP deposit on the surface of the scaffolds was formed, which evolved over time into carbonate hydroxyapatite (HCA). Moreover, the enhanced mechanical properties of these scaffolds were constant over time in SBF; after an initial reduction of the maximum compressive strength upon 7 days of immersion in SBF (to 1.2 ± 0.2 MPa), the strength values remained almost constant and higher than those of BG-based scaffolds prepared using PU foam (<0.05 MPa). Preliminary cell culture tests with Saos-2 osteoblast cell line, namely direct and indirect tests, demonstrated that no toxic residues remained from the natural marine sponge templates and that cells were able to proliferate on the scaffold surfaces.

The stimulation of osteogenic differentiation of embryoid bodies from human induced pluripotent stem cells by akermanite bioceramics

Induced pluripotent stem cells (iPSCs) have great potential as seed cells for tissue engineering applications. Previous studies have shown that iPSCs could be induced to differentiate into bone forming cells. However, in a tissue engineering approach, seeding cells in biomaterials is required, and the effect of biomaterials on cell growth and differentiation is critical for the success of the formation of engineered tissues. In this study, we investigated the effect of akermanite, a bioactive ceramic, on the osteogenic differentiation of embryoid body (EB) cells derived from human iPSCs. The results showed that, in the presence of osteogenic factors (ascorbic acid, dexamethasone, and β-glycerophosphate), ionic extracts of akermanite enhanced the osteogenic differentiation of EB cells as compared with normal osteogenic medium. Alkaline phosphatase (ALP) activity and the expression of osteogenic marker genes such as osteocalcin (OCN), collagen (COL-1), RUNX2, and BMP2 are significantly increased by the stimulation of akermanite ceramic extracts at certain concentration ranges. More interesting is that the medium containing extracts of akermanite but without osteogenic factors also showed stimulatory effects on the osteogenic differentiation of EB cells as compared to normal growth medium without osteogenic factors, such as ascorbic acid, dexamethasone, and β-glycerophosphate, not at the early stage of culture, but only at the later stage of the culture period (21 days). These results suggest that akermanite as a bioactive material together with human iPSCs might be used for bone tissue engineering applications.

Ectopic bone formation in rapidly fabricated acellular injectable dense collagen-Bioglass hybrid scaffolds via gel aspiration-ejection

Gel aspiration-ejection (GAE) has recently been introduced as an effective technique for the rapid production of injectable dense collagen (IDC) gel scaffolds with tunable collagen fibrillar densities (CFDs) and microstructures. Herein, a GAE system was applied for the advanced production and delivery of IDC and IDC-Bioglass(®) (IDC-BG) hybrid gel scaffolds for potential bone tissue engineering applications. The efficacy of GAE in generating mineralizable IDC-BG gels (from an initial 75-25 collagen-BG ratio) produced through needle gauge numbers 8G (3.4 mm diameter and 6 wt% CFD) and 14G (1.6 mm diameter and 14 wt% CFD) was investigated. Second harmonic generation (SHG) imaging of as-made gels revealed an increase in collagen fibril alignment with needle gauge number. In vitro mineralization of IDC-BG gels was confirmed where carbonated hydroxyapatite was detected as early as day 1 in simulated body fluid, which progressively increased up to day 14. In vivo mineralization of, and host response to, acellular IDC and IDC-BG gel scaffolds were further investigated following subcutaneous injection in adult rats. Mineralization, neovascularization and cell infiltration into the scaffolds was enhanced by the addition of BG and at day 21 post injection, there was evidence of remodelling of granulation tissue into woven bone-like tissue in IDC-BG. SHG imaging of explanted scaffolds indicated collagen fibril remodelling through cell infiltration and mineralization over time. In sum, the results suggest that IDC-BG hybrid gels have osteoinductive properties and potentially offer a novel therapeutic approach for procedures requiring the injectable delivery of a malleable and dynamic bone graft that mineralizes under physiological conditions.

Evaluation of in vivo angiogenetic effects of copper doped bioactive glass scaffolds in the AV loop model

effects of 3D scaffolds made from 45S5 bioactive glass (BG) doped with 1 wt. % copper ions in the arteriovenous loop model of the rat.

Materials and Methods: An arteriovenous loop was built in the groin of 10 rats and inserted in 1% copper doped 45S5 BG scaffolds and fibrin. The scaffold and the AV loop were inserted in Teflon isolation chambers and explanted 3 weeks after implantation. Afterwards the scaffolds were analyzed by Micro-CT and histology regarding vascularization. Results were compared to plain 45S5 BG-based scaffolds from a previous study.

Results: Micro-CT and histological evaluation showed consistent vascularization of the constructs. A tendency towards an increased vascularization in the copper doped BG group compared to plain BG constructs could be observed. However, therewas no significant difference in statistical analysis between both groups.

Conclusions: This study shows results that support an increased angiogenetic effect of 1% copper doped 45S5 BG compared to regular 45S5 BG scaffolds in the rat arteriovenous loop model although these tendencies are not backed by statistical evidence. Maybe higher copper doses could lead to a statistically significant angiogenetic effect.

Bioglass Activated Skin Tissue Engineering Constructs for Wound Healing

Wound healing is a complicated process, and fibroblast is a major cell type that participates in the process. Recent studies have shown that bioglass (BG) can stimulate fibroblasts to secrete a multitude of growth factors that are critical for wound healing. Therefore, we hypothesize that BG can stimulate fibroblasts to have a higher bioactivity by secreting more bioactive growth factors and proteins as compared to untreated fibroblasts, and we aim to construct a bioactive skin tissue engineering graft for wound healing by using BG activated fibroblast sheet. Thus, the effects of BG on fibroblast behaviors were studied, and the bioactive skin tissue engineering grafts containing BG activated fibroblasts were applied to repair the full skin lesions on nude mouse. Results showed that BG stimulated fibroblasts to express some critical growth factors and important proteins including vascular endothelial growth factor, basic fibroblast growth factor, epidermal growth factor, collagen I, and fibronectin. In vivo results revealed that fibroblasts in the bioactive skin tissue engineering grafts migrated into wound bed, and the migration ability of fibroblasts was stimulated by BG. In addition, the bioactive BG activated fibroblast skin tissue engineering grafts could largely increase the blood vessel formation, enhance the production of collagen I, and stimulate the differentiation of fibroblasts into myofibroblasts in the wound site, which would finally accelerate wound healing. This study demonstrates that the BG activated skin tissue engineering grafts contain more critical growth factors and extracellular matrix proteins that are beneficial for wound healing as compared to untreated fibroblast cell sheets.

Preparation of calcium silicate/decellularized porcine myocardial matrix crosslinked by procyanidins for cardiac tissue engineering

CS-incorporated myocardial ECM scaffolds release functional ions gradually, which stimulate expression of the proangiogenic factors in endothelia cells.

Hybrid scaffolding strategy for dermal tissue reconstruction: a bioactive glass/chitosan/silk fibroin composite

Regeneration of deep burn wounds is a very complex process that strongly relies on the tissue response between the dermal substitute and the newly-formed dermis.

Biological behavior of bioactive glasses and their composites

This review summarizes current developments in improving the biological behavior of bioactive glasse and their composites.

Novel glass-like coatings for cardiovascular implant application: Preparation, characterization and cellular interaction

Glass coatings are of great interest for biomedical implant application due to their excellent properties. Nowadays they are used in different fields including drug delivery, for bone tissue regeneration or as implant. Nevertheless they can only be applied using high temperatures. Therefore their usage in the field of cardiovascular implant application is still restricted. Accordingly new developments in this field have been carried out to overcome this problem and to coat cardiovascular implants. Here, novel glass-like coatings have been developed and applied using sol-gel technique at moderate temperatures. The biocompatibility and selectivity have been analyzed using human endothelial cells. The obtained results clarify that the developed compositions can either promote or suppress endothelial cell growth only by altering the sintering atmosphere. A later application as thin layer on cardiovascular implants like stents is conceivable.

Bioactive Glass for Large Bone Repair

There has been an ongoing quest for new biomedical materials for the repair and regeneration of large segmental bone defects caused by disease or trauma. Autologous bone graft (ABG) remains the gold standard for bone repair despite their limited supply and donor-site morbidity. The current tissue engineering approach with synthetically derived bone grafts requires a bioactive ceramic or polymeric scaffold loaded with growth factors for osteoinduction and angiogenesis, and bone marrow stromal cells (BMSCs) for osteogenic properties. Unfortunately, this approach has serious drawbacks: the low mechanical strength of scaffolds, the high cost of growth factors, and a lack of optimal strategies for growth-factor delivery. Here, it is shown that, for the first time, a synthetic material alone can repair large bone defects as efficiently as the gold standard ABG. Through the use of strong and resorbable bioactive glass scaffolds, complete bone healing, and defect bridging can be achieved in a rabbit femur segmental defect model without growth factors or BMSCs. New bone and blood vessel formation, in both inner and peripheral scaffolds, demonstrates the excellent osteoinductive and osteogenic properties of these scaffolds similar as ABG.

Osteoinduction of bone grafting materials for bone repair and regeneration

Regeneration of bone defects caused by trauma, infection, tumours or inherent genetic disorders is a clinical challenge that usually necessitates bone grafting materials. Autologous bone or autograft is still considered the clinical "gold standard" and the most effective method for bone regeneration. However, limited bone supply and donor site morbidity are the most important disadvantages of autografting. Improved biomaterials are needed to match the performance of autograft as this is still superior to that of synthetic bone grafts. Osteoinductive materials would be the perfect candidates for achieving this task. The aim of this article is to review the different groups of bone substitutes in terms of their most recently reported osteoinductive properties. The different factors influencing osteoinductivity by biomaterials as well as the mechanisms behind this phenomenon are also presented, showing that it is very limited compared to osteoinductivity shown by bone morphogenetic proteins (BMPs). Therefore, a new term to describe osteoinductivity by biomaterials is proposed. Different strategies for adding osteoinductivity (BMPs, stem cells) to bone substitutes are also discussed. The overall objective of this paper is to gather the current knowledge on osteoinductivity of bone grafting materials for the effective development of new graft substitutes that enhance bone regeneration.

Design of a thermosensitive bioglass/agarose-alginate composite hydrogel for chronic wound healing

Chronic wounds are a major health problem around the world, and there is a need to develop new types of dressing materials to enhance chronic wound healing. Humidity and angiogenic conditions are two important factors that may significantly affect the healing process. Therefore, a new wound dressing system based on bioglass (BG) and agarose-alginate (AA) has been designed, which can create a moist environment and improve the angiogenic condition of the wound area at the same time. The obtained BG/AA hydrogel has thermosensitivity allowing it to gel at physiological temperature through the interaction between the agarose and alginate polymer chains, and the chains can be further cross-linked by ions released from BG. The BG/AA hydrogel can promote migration of fibroblast and endothelial cells and it can also enhance the angiogenesis of endothelial cells in a fibroblast-endothelial cell co-culture model in vitro. The potential of the BG/AA hydrogel as a wound dressing has been further evaluated by using the rabbit ear ischemic wound model. The results demonstrate that the BG/AA hydrogel can enhance blood vessel and epithelium formation, which contribute to wound healing. The present study suggests that this new BG/AA hydrogel system may be used as a bioactive dressing for chronic wound healing.

Multifunctional Chitosan-45S5 Bioactive Glass-Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Microsphere Composite Membranes for Guided Tissue/Bone Regeneration

Novel multifunctional chitosan-45S5 bioactive glass-poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) microsphere (CS-BG-MS) composite membranes were developed with applicability in guided tissue/bone regeneration (GTR/GBR). The incorporation of 45S5 BG and PHBV MS into CS membranes not only provided the membranes with favorable surface roughness, hydrophilicity, and flexibility but also slowed down their degradation rate. Moreover, the CS membranes became bioactive after the incorporation of 45S5 BG and capable of releasing drugs of different physicochemical properties in a controlled and sustained manner with the addition of PHBV MS. Cell culture tests showed that osteoblast-like MG-63 human osteosarcoma cells had significantly higher adhesion, cell proliferation, and alkaline phosphatase (ALP) activity on CS-BG and CS-BG-MS membranes than on neat CS membranes. Therefore, the developed bioactive CS-BG-MS membranes with potential multidrug (e.g., antibacterial and antiosteoporosis drugs) delivery capability are promising candidate membranes for GTR/GBR applications.

Novel nanocomposite biomaterials with controlled copper/calcium release capability for bone tissue engineering multifunctional scaffolds

This work aimed to develop novel composite biomaterials for bone tissue engineering (BTE) made of bioactive glass nanoparticles (Nbg) and alginate cross-linked with Cu(2+) or Ca(2+) (AlgNbgCu, AlgNbgCa, respectively). Two-dimensional scaffolds were prepared and the nanocomposite biomaterials were characterized in terms of morphology, mechanical strength, bioactivity, biodegradability, swelling capacity, release profile of the cross-linking cations and angiogenic properties. It was found that both Cu(2+) and Ca(2+) are released in a controlled and sustained manner with no burst release observed. Finally, in vitro results indicated that the bioactive ions released from both nanocomposite biomaterials were able to stimulate the differentiation of rat bone marrow-derived mesenchymal stem cells towards the osteogenic lineage. In addition, the typical endothelial cell property of forming tubes in Matrigel was observed for human umbilical vein endothelial cells when in contact with the novel biomaterials, particularly AlgNbgCu, which indicates their angiogenic properties. Hence, novel nanocomposite biomaterials made of Nbg and alginate cross-linked with Cu(2+) or Ca(2+) were developed with potential applications for preparation of multifunctional scaffolds for BTE.

Reprint of: Review of bioactive glass: From Hench to hybrids

Bioactive glasses are reported to be able to stimulate more bone regeneration than other bioactive ceramics but they lag behind other bioactive ceramics in terms of commercial success. Bioactive glass has not yet reached its potential but research activity is growing. This paper reviews the current state of the art, starting with current products and moving onto recent developments. Larry Hench's 45S5 Bioglass® was the first artificial material that was found to form a chemical bond with bone, launching the field of bioactive ceramics. In vivo studies have shown that bioactive glasses bond with bone more rapidly than other bioceramics, and in vitro studies indicate that their osteogenic properties are due to their dissolution products stimulating osteoprogenitor cells at the genetic level. However, calcium phosphates such as tricalcium phosphate and synthetic hydroxyapatite are more widely used in the clinic. Some of the reasons are commercial, but others are due to the scientific limitations of the original Bioglass 45S5. An example is that it is difficult to produce porous bioactive glass templates (scaffolds) for bone regeneration from Bioglass 45S5 because it crystallizes during sintering. Recently, this has been overcome by understanding how the glass composition can be tailored to prevent crystallization. The sintering problems can also be avoided by synthesizing sol-gel glass, where the silica network is assembled at room temperature. Process developments in foaming, solid freeform fabrication and nanofibre spinning have now allowed the production of porous bioactive glass scaffolds from both melt- and sol-gel-derived glasses. An ideal scaffold for bone regeneration would share load with bone. Bioceramics cannot do this when the bone defect is subjected to cyclic loads, as they are brittle. To overcome this, bioactive glass polymer hybrids are being synthesized that have the potential to be tough, with congruent degradation of the bioactive inorganic and the polymer components. Key to this is creating nanoscale interpenetrating networks, the organic and inorganic components of which have covalent coupling between them, which involves careful control of the chemistry of the sol-gel process. Bioactive nanoparticles can also now be synthesized and their fate tracked as they are internalized in cells. This paper reviews the main developments in the field of bioactive glass and its variants, covering the importance of control of hierarchical structure, synthesis, processing and cellular response in the quest for new regenerative synthetic bone grafts. The paper takes the reader from Hench's Bioglass 45S5 to new hybrid materials that have tailorable mechanical properties and degradation rates.

Analyses of the modulatory effects of antibacterial silver doped calcium phosphate-based ceramic nano-powder on proliferation, survival, and angiogenic capacity of different mammalian cells in vitro

In this study, the antibacterial, cytotoxic, and angiogenic activities of silver doped calcium phosphate-based inorganic powder (ABT or PAG) were systematically investigated. ABT powders containing varying silver content were fabricated using a wet chemical manufacturing method. Antibacterial efficiencies of the ABT powders were investigated using a standard test with indicator bacteria and yeast. The cytotoxic effects of ABT on three different fibroblast cells and human umbilical vein endothelial cells (HUVECs) were assessed using MTT assay. ABT powder exhibits concentration-related cytotoxicity characteristics. Apoptotic activity, attachment capability, and wound healing effects were examined on fibroblasts. The angiogenic activity of ABT was investigated by tube formation assay in HUVECs; 10 μg ml(-1) and 100 μg ml(-1) concentrations of the highest metal ion content of ABT did not disrupt the tube formation of HUVECs. All these tests showed that ABT does not compromise the survival of the cells and might impose regeneration ability to various cell types. These results indicate that silver doped calcium phosphate-based inorganic powder with an optimal silver content has good potential for developing new biomaterials for implant applications.

Feasibility of silica-hybridized collagen hydrogels as three-dimensional cell matrices for hard tissue engineering

Exploiting hydrogels for the cultivation of stem cells, aiming to provide them with physico-chemical cues suitable for osteogenesis, is a critical demand for bone engineering. Here, we developed hybrid compositions of collagen and silica into hydrogels via a simple sol-gel process. The physico-chemical and mechanical properties, degradation behavior, and bone-bioactivity were characterized in-depth; furthermore, the in vitro mesenchymal stem cell growth and osteogenic differentiation behaviors within the 3D hybrid gel matrices were communicated for the first time. The hydrolyzed and condensed silica phase enabled chemical links with the collagen fibrils to form networked hybrid gels. The hybrid gels showed improved chemical stability and greater resistance to enzymatic degradation. The in vitro apatite-forming ability was enhanced by the hybrid composition. The viscoelastic mechanical properties of the hybrid gels were significantly improved in terms of the deformation resistance to an applied load and the modulus values under a dynamic oscillation. Mesenchymal stem cells adhered well to the hybrid networks and proliferated actively with substantial cytoskeletal extensions within the gel matrices. Of note, the hybrid gels substantially reduced the cell-mediated gel contraction behaviors, possibly due to the stiffer networks and higher resistance to cell-mediated degradation. Furthermore, the osteogenic differentiation of cells, including the expression of bone-associated genes and protein, was significantly upregulated within the hybrid gel matrices. Together with the physico-chemical and mechanical properties, the cellular behaviors observed within 3D gel matrices, being different from the previous approaches reported on 2D substrates, provide new information on the feasibility and usefulness of the silica-collagen system for stem cell culture and tissue engineering of hard tissues.

Oxygen diffusion in marine-derived tissue engineering scaffolds

This paper addresses the computation of the effective diffusivity in new bioactive glass (BG) based tissue engineering scaffolds. High diffusivities facilitate the supply of oxygen and nutrients to grown tissue as well as the rapid disposal of toxic waste products. The present study addresses required novel types of bone tissue engineering BG scaffolds that are derived from natural marine sponges. Using the foam replication method, the scaffold geometry is defined by the porous structure of Spongia Agaricina and Spongia Lamella. These sponges present the advantage of attaining scaffolds with higher mechanical properties (2-4 MPa) due to a decrease in porosity (68-76%). The effective diffusivities of these structures are compared with that of conventional scaffolds based on polyurethane (PU) foam templates, characterised by high porosity (>90%) and lower mechanical properties (>0.05 MPa). Both the spatial and directional variations of diffusivity are investigated. Furthermore, the effect of scaffold decomposition due to immersion in simulated body fluid (SBF) on the diffusivity is addressed. Scaffolds based on natural marine sponges are characterised by lower oxygen diffusivity due to their lower porosity compared with the PU replica foams, which should enable the best oxygen supply to newly formed bone according the numerical results. The oxygen diffusivity of these new BG scaffolds increases over time as a consequence of the degradation in SBF.

Effect of ion release from Cu-doped 45S5 Bioglass® on 3D endothelial cell morphogenesis

Both silicate-based bioactive glasses and copper ions have demonstrated angiogenic activity and therefore represent promising bioinorganic agents for the promotion of vascularization in tissue-engineered scaffolds. This study examined the effect of ionic release products from 45S5 Bioglass® doped with 0 and 2.5 wt.% CuO (BG and Cu-BG respectively) on the formation of capillary-like networks by SVEC4-10 endothelial cells (ECs) seeded in a three-dimensional (3D) type I collagen matrix. Copper and silicon release following 24h dissolution increased non-proportionally with Cu-BG concentration in cell culture medium, while calcium levels were decreased below the initial medium concentration. EC network length, connectivity, branching, quantified by means of a 3D morphometric image analysis method, as well as proliferation and metabolic activity were reduced in a dose-dependent fashion by BG and Cu-BG ionic release products. This reduction was less prominent for BG compared to an equivalent concentration of Cu-BG, which was attributed to a lower extent of silicon release and calcium consumption. Moreover, a CuCl2 dose equivalent to the highest concentration of Cu-BG exhibited no effect on ECs. In conclusion, while the previously reported pro-angiogenic activity of both Bioglass® and copper may not be reflected in a direct response of ECs, this study provides a maximum glass concentration for non-harmful angiogenic stimulation to be examined in future work.

45S5 Bioglass(®)-MWCNT composite: processing and bioactivity

Multi-walled carbon nanotube (MWCNT)-Bioglass (BG) matrix composite was fabricated using a facile and scalable aqueous colloidal processing method without using any surfactants followed by spark plasma sintering (SPS) consolidation. The individual MWCNTs were initially uniformly dispersed in water and then entirely immobilized on the BG particles during the colloidal processing, avoiding their common re-agglomeration during the water-removal and drying step, which guaranteed their uniform dispersion within the dense BG matrix after the consolidation process. SPS was used as a fast sintering technique to minimise any damage to the MWCNT structure during the high-temperature consolidation process. The electrical conductivity of BG increased by 8 orders of magnitude with the addition of 6.35 wt% of MWCNTs compared to pure BG. Short-duration tests were used in the present study as a preliminary evaluation to understand the effect of incorporating MWCNTs on osteoblast-like cells. The analysed cell proliferation, viability and phenotype expression of MG-63 cells showed inhibition on 45S5 Bioglass(®)-MWCNT composite surfaces.