Sequence specificity of viral end DNA binding by HIV-1 integrase reveals critical regions for protein-DNA interaction

Retroviral integrase inhibitors year 2000: update and perspectives

HIV-1 integrase is an essential enzyme for retroviral replication and a rational target for the design of anti-AIDS drugs. A number of inhibitors have been reported in the past 8 years. This review focuses on the recent developments in the past 2 years. There are now several inhibitors with known sites of actions and antiviral activity. The challenge is to convert these leads into drugs that will selectively target integrase in vivo, and can be added to our antiviral armamentarium.

Determinants of Mg2+-dependent activities of recombinant human immunodeficiency virus type 1 integrase

The relationship between Mg(2+)-dependent activity and the self-assembly state of HIV-1 integrase was investigated using different protein preparations. The first preparations, IN(CHAPS) and IN(dial), were purified in the presence of detergent, but in the case of IN(dial), the detergent was removed during a final dialysis. The third preparation, IN(zn), was purified without any detergent. The three preparations displayed comparable Mn(2+)-dependent activities. In contrast, the Mg(2+)-dependent activity that reflects a more realistic view of the physiological activity strongly depended on the preparation. IN(CHAPS) was not capable of using Mg(2+) as a cofactor, whereas IN(zn) was highly active under the same conditions. In the accompanying paper [Deprez, E., et al. (2000) Biochemistry 39, 9275-9284], we used time-resolved fluorescence anisotropy to demonstrate that IN(CHAPS) was monomeric at the concentration of enzymatic assays. Here, we show that IN(zn) was homogeneously tetrameric under similar conditions. Moreover, IN(dial) that exhibited an intermediary Mg(2+)-dependent activity existed in a monomer-multimer equilibrium. The level of Mg(2+)- but not Mn(2+)-dependent activity of IN(dial) was altered by addition of detergent which plays a detrimental role in the maintenance of the oligomeric organization. Our results indicate that the ability of integrase to use Mg(2+) as a cofactor is related to its self-assembly state in solution, whereas Mn(2+)-dependent activity is not. Finally, the oligomeric IN(zn) was capable of binding efficiently to DNA regardless of the cationic cofactor, whereas the monomeric IN(CHAPS) strictly required Mn(2+). Thus, we propose that a specific conformation of integrase is a prerequisite for its binding to DNA in the presence of Mg(2+).

Oligomeric states of the HIV-1 integrase as measured by time-resolved fluorescence anisotropy

Self-assembly properties of HIV-1 integrase were investigated by time-resolved fluorescence anisotropy using tryptophanyl residues as a probe. From simulation analyses, we show that suitable photon counting leads to an accurate determination of long rotational correlation times in the range of 20-80 ns, permitting the distinction of the monomer, dimer, and tetramer from higher oligomeric forms of integrase. The accuracy of correlation times higher than 100 ns is too low to distinguish the octamer from other larger species. The oligomeric states of the widely used detergent-solubilized integrase were then studied in solution under varying parameters known to influence the activity. In the micromolar range, integrase exists as high-order multimers such as an octamer and/or aggregates and a well-defined tetramer, at 25 and 35 degrees C, respectively. However, integrase is monomeric at catalytically active concentrations (in the sub-micromolar range). Detergents (NP-40 and CHAPS) and divalent cation cofactors (Mg(2+) and Mn(2+)) have a clear dissociative effect on the high multimeric forms of integrase. In addition, we observed that Mg(2+) and Mn(2+) have different effects on both the oligomeric state and the conformation of the monomer. This could explain in part why these two metal cations are not equivalent in terms of catalytic activity in vitro. In contrast, addition of Zn(2+) stimulates dimerization. Interestingly, this role of Zn(2+) in the multimerization process was evident only in the presence of Mg(2+) which by itself does not induce oligomerization. Finally, it is highly suggested that the presence of detergent during the purification procedure plays a negative role in the proper self-assembly of integrase. Accordingly, the accompanying paper [Leh, H., et al. (2000) Biochemistry 39, 9285-9294] shows that a detergent-free integrase preparation has self-assembly and catalytic properties different from those of the detergent-solubilized enzyme.

Crystal structure of the HIV-1 integrase catalytic core and C-terminal domains: a model for viral DNA binding

Insolubility of full-length HIV-1 integrase (IN) limited previous structure analyses to individual domains. By introducing five point mutations, we engineered a more soluble IN that allowed us to generate multidomain HIV-1 IN crystals. The first multidomain HIV-1 IN structure is reported. It incorporates the catalytic core and C-terminal domains (residues 52-288). The structure resolved to 2.8 A is a Y-shaped dimer. Within the dimer, the catalytic core domains form the only dimer interface, and the C-terminal domains are located 55 A apart. A 26-aa alpha-helix, alpha6, links the C-terminal domain to the catalytic core. A kink in one of the two alpha6 helices occurs near a known proteolytic site, suggesting that it may act as a flexible elbow to reorient the domains during the integration process. Two proteins that bind DNA in a sequence-independent manner are structurally homologous to the HIV-1 IN C-terminal domain, suggesting a similar protein-DNA interaction in which the IN C-terminal domain may serve to bind, bend, and orient viral DNA during integration. A strip of positively charged amino acids contributed by both monomers emerges from each active site of the dimer, suggesting a minimally dimeric platform for binding each viral DNA end. The crystal structure of the isolated catalytic core domain (residues 52-210), independently determined at 1.6-A resolution, is identical to the core domain within the two-domain 52-288 structure.

Developing a dynamic pharmacophore model for HIV-1 integrase

We present the first receptor-based pharmacophore model for HIV-1 integrase. The development of "dynamic" pharmacophore models is a new method that accounts for the inherent flexibility of the active site and aims to reduce the entropic penalties associated with binding a ligand. Furthermore, this new drug discovery method overcomes the limitation of an incomplete crystal structure of the target protein. A molecular dynamics (MD) simulation describes the flexibility of the uncomplexed protein. Many conformational models of the protein are saved from the MD simulations and used in a series of multi-unit search for interacting conformers (MUSIC) simulations. MUSIC is a multiple-copy minimization method, available in the BOSS program; it is used to determine binding regions for probe molecules containing functional groups that complement the active site. All protein conformations from the MD are overlaid, and conserved binding regions for the probe molecules are identified. Those conserved binding regions define the dynamic pharmacophore model. Here, the dynamic model is compared to known inhibitors of the integrase as well as a three-point, ligand-based pharmacophore model from the literature. Also, a "static" pharmacophore model was determined in the standard fashion, using a single crystal structure. Inhibitors thought to bind in the active site of HIV-1 integrase fit the dynamic model but not the static model. Finally, we have identified a set of compounds from the Available Chemicals Directory that fit the dynamic pharmacophore model, and experimental testing of the compounds has confirmed several new inhibitors.

Identification of critical amino acid residues in human immunodeficiency virus type 1 IN required for efficient proviral DNA formation at steps prior to integration in dividing and nondividing cells

Human immunodeficiency virus type 1 integrase (HIV-1 IN) is thought to have several putative roles at steps prior to integration, such as reverse transcription and nuclear transport of the preintegration complex (PIC). Here, we investigated new functional aspects of HIV-1 IN in the context of the viral replication cycle through point mutagenesis of Ser, Thr, Tyr, Lys, and Arg residues conserved in IN, some of which are located at possible phosphorylation sites. Our results showed that mutations of these Ser or Thr residues had no effect on reverse transcription and nuclear transport of PIC but had a slight effect on integration. Of note, mutations in the conserved KRK motif (amino acids 186 to 189), proposed previously as a putative nuclear localization signal (NLS) of HIV-1 IN, did not affect the karyophilic property of HIV-1 IN as shown by using a green fluorescent protein fusion protein expression system. Instead, these KRK mutations resulted in an almost complete lack of viral gene expression due to the failure to complete reverse transcription. This defect was complemented by supplying wild-type IN in trans, suggesting a trans-acting function of the KRK motif of IN in reverse transcription. Mutation at the conserved Tyr 143 (Y143G) resulted in partial impairment of completion of reverse transcription in monocyte-derived macrophages (MDM) but not in rhabdomyosarcoma cells. Similar effects were obtained by introducing a stop codon in the vpr gene (DeltaVpr), and additive effects of both mutations (Y143G plus DeltaVpr) were observed. In addition, these mutants did not produce two-long terminal repeat DNA, a surrogate marker for nuclear entry, in MDM. Thus, the possible impairment of Y143G might occur during the nuclear transport of the PIC. Taken together, our results identified new functional aspects of the conserved residues in HIV-1 IN: i) the KRK motif might have a role in efficient reverse transcription in both dividing and nondividing cells but not in the NLS function; ii) Y143 might be an important residue for maintaining efficient proviral DNA formation in nondividing cells.

Lentivirus replication and regulation

Lentiviruses are associated with chronic diseases of the hematological and neurological systems in animals and man. In particular, human immunodeficiency virus type 1 (HIV-1) is the etiological agent of the global AIDS epidemic. The genomes of lentiviruses are complex, encoding a number of regulatory and accessory proteins not found in other retroviruses. This complexity is reflected in their replication cycle, which reveals intricate regulatory pathways and unique mechanisms for viral persistence. In this review, we highlight some of these unique features for HIV-1, with particular focus on the transcriptional and posttranscriptional control of gene expression. Although our understanding of the biology of HIV-1 is far from complete, the knowledge gained thus far has already led to novel strategies for both virus intervention and exploiting the lentiviruses for therapeutic applications.

A structured RNA motif is involved in correct placement of the tRNA(3)(Lys) primer onto the human immunodeficiency virus genome

Human immunodeficiency virus type 1 (HIV-1) reverse transcription is primed by the cellular tRNA(3)(Lys) molecule that binds with its 3'-terminal 18 nucleotides to the fully complementary primer-binding site (PBS) on the viral RNA genome. Besides this complementarity, annealing of the primer may be stimulated by additional base-pairing interactions between other parts of the tRNA molecule and viral sequences flanking the PBS. According to the RNA secondary structure model of the HIV-1 leader region, part of the PBS sequence is involved in base pairing to form a small stem-loop structure, termed the U5-PBS hairpin. This hairpin may be involved in the process of reverse transcription. To study the role of the U5-PBS hairpin in the viral replication cycle, we introduced mutations in the U5 region that affect the stability of this structured RNA motif. Stabilization and destabilization of the hairpin significantly inhibited virus replication. Upon prolonged culturing of the virus mutant with the stabilized hairpin, revertant viruses were obtained with additional mutations that restore the thermodynamic stability of the U5-PBS hairpin. The thermodynamic stability of the U5-PBS hairpin apparently has to stay within narrow limits for efficient HIV-1 replication. Transient transfection experiments demonstrated that transcription of the proviral genomes, translation of the viral mRNAs, and assembly of the virions with a normal RNA content is not affected by the mutations within the U5-PBS hairpin. We show that stabilization of the hairpin reduced the amount of tRNA primer that is annealed to the PBS. Destabilization of the hairpin did not affect tRNA annealing, but the viral RNA-tRNA complex was less stable. These results suggest that the U5-PBS hairpin is involved in correct placement of the tRNA primer on the viral genome. The analysis of virus mutants and revertants and the RNA structure probing experiments presented in this study are consistent with the existence of the U5-PBS hairpin as predicted in the RNA secondary structure model.

Subterminal viral DNA nucleotides as specific recognition signals for human immunodeficiency virus type 1 and visna virus integrases under magnesium-dependent conditions

Many reports describe the characteristics of susceptible viral DNA substrates to various retroviral integrases during in vitro reactions in which manganese serves as the divalent cation cofactor for site-specific nicking. However, manganese is known to alter the specificity of some endonucleases and magnesium may be the divalent cation used during retroviral integration in vivo. To address these concerns, we identified conditions under which the integrases of human immunodeficiency virus type 1 and visna virus were optimally active with magnesium (the first time such activity was shown for visna virus integrase) and used these conditions to test the susceptibility of a series of oligodeoxynucleotide substrates. The data show that two base pairs immediately internal to the conserved CA dinucleotide near the termini of retroviral DNA are selectively recognized by the two integrases and that the final six base pairs of viral DNA contain sufficient sequence information for specific recognition and cleavage by each enzyme. The results validate the importance of the subterminal viral DNA positions even in the presence of magnesium and identify viral DNA positions that functionally interact with integrase. The data obtained under magnesium-dependent conditions, which were obtained with substrates containing single and multiple base-pair substitutions and two different retroviral integrases, are consistent with those previously obtained with manganese. Thus, the large body of manganese-dependent data identifying terminal viral DNA positions that are important in substrate recognition by various integrases likely reflects interactions that are biologically relevant.

Crystal structure of an active two-domain derivative of Rous sarcoma virus integrase

Integration of retroviral cDNA is a necessary step in viral replication. The virally encoded integrase protein and DNA sequences at the ends of the linear viral cDNA are required for this reaction. Previous studies revealed that truncated forms of Rous sarcoma virus integrase containing two of the three protein domains can carry out integration reactions in vitro. Here, we describe the crystal structure at 2.5 A resolution of a fragment of the integrase of Rous sarcoma virus (residues 49-286) containing both the conserved catalytic domain and a modulatory DNA-binding domain (C domain). The catalytic domains form a symmetric dimer, but the C domains associate asymmetrically with each other and together adopt a canted conformation relative to the catalytic domains. A binding path for the viral cDNA is evident spanning both domain surfaces, allowing modeling of the larger integration complexes that are known to be active in vivo. The modeling suggests that formation of an integrase tetramer (a dimer of dimers) is necessary and sufficient for joining both viral cDNA ends at neighboring sites in the target DNA. The observed asymmetric arrangement of C domains suggests that they could form a rotationally symmetric tetramer that may be important for bridging integrase complexes at each cDNA end.

Mapping target site selection for the non-specific nuclease activities of retroviral integrase

To identify the parts of retroviral integrase that interact with its DNA substrates, we compared the patterns of target site usage by chimeric enzymes and protein fragments in assays that reveal integrase's non-specific nuclease activities. The central region of 12 chimeric proteins between the human immunodeficiency virus type 1 and visna virus integrases was found to be responsible for selecting non-viral target DNA sites when small alcohols provide the attacking nucleophilic OH group during non-specific alcoholysis assays. Testing deletion derivatives of the integrase protein in this assay, which has similarities to the DNA joining reaction that occurs during retroviral integration, defined a smaller central domain that is sufficient for activity. Thus, this core domain likely contains both the host DNA site and the nucleophile site. Surprisingly, the region of integrase responsible for selecting non-viral target DNA sites when the viral DNA end is the attacking nucleophile could not similarly be mapped with the standard oligonucleotide joining assay. We therefore tested the proteins in a more sensitive assay that displays preferred sites of viral DNA insertion in a plasmid DNA target. All 12 chimeras yielded novel patterns compared with the wild-type enzymes in this assay, although local insertion patterns indicated that the central domain plays an important role in target site selection. Together, these data suggest that other protein regions must be involved when the attacking nucleophilic group is provided by viral DNA. Because specific recognition of viral DNA ends was previously mapped to the central domain, two different regions of integrase must interact with retroviral DNA.

Retroviral DNA integration

DNA integration is a unique enzymatic process shared by all retroviruses and retrotransposons. During integration, double-stranded linear viral DNA is inserted into the host genome in a process catalyzed by the virus-encoded integrase (IN). The mechanism involves a series of nucleophilic attacks, the first of which removes the terminal 2 bases from the 3' ends of the long terminal repeats and of the second which inserts the viral DNA into the host genome. IN specifically recognizes the DNA sequences at the termini of the viral DNA, juxtaposing both ends in an enzyme complex that inserts the viral DNA into a single site in a concerted manner. Small duplications of the host DNA, characteristic of the viral IN, are found at the sites of insertion. At least two host proteins, HMG-I(Y) and BAF, have been shown to increase the efficiency of the integration reaction.

Self-association and domains of interactions of an amphipathic helix peptide inhibitor of HIV-1 integrase assessed by analytical ultracentrifugation and NMR experiments in trifluoroethanol/H(2)O mixtures

EAA26 (VESMNEELKKIIAQVRAQAEHLKTAY) is a better inhibitor of human immunodeficiency virus, type 1, integrase than its parent Lys-159, reproducing the enzyme segment 147-175 with a nonpolar-polar/charged residue periodicity defined by four helical heptads (abcdefg) prone to collapse into a coiled-coil. Circular dichroism, nuclear magnetic resonance, sedimentation equilibrium, and chemical cross-linking were used to analyze EAA26 in various trifluoroethanol/H(2)O mixtures. In pure water the helix content is weak but increases regularly up to 50-60% trifluoroethanol. In contrast the multimerization follows a bell-shaped curve with monomers in pure water, tetramers at 10% trifluoroethanol, and dimers at 40% trifluoroethanol. All suggest that interhelical interactions between apolar side chains are required for the coiled-coil formation of EAA26 and subsist at medium trifluoroethanol concentration. The N(H) temperature coefficients measured by nuclear magnetic resonance show that at low trifluoroethanol concentration the amide groups buried in the hydrophobic interior of four alpha-helix bundles are weakly accessible to trifluoroethanol and are only weakly subject to its hydrogen bond strengthening effect. The increased accessibility of trifluoroethanol to buried amide groups at higher trifluoroethanol concentration entails the reduction of the hydrophobic interactions and the conversion of helix tetramers into helix dimers, the latter displaying a smaller hydrophobic interface. The better inhibitory activity of EAA26 compared with Lys-159 could arise from its better propensity to form a helix bundle structure with the biologically important helical part of the 147-175 segment in integrase.

Structure of the HIV-1 integrase catalytic domain complexed with an inhibitor: a platform for antiviral drug design

HIV integrase, the enzyme that inserts the viral DNA into the host chromosome, has no mammalian counterpart, making it an attractive target for antiviral drug design. As one of the three enzymes produced by HIV, it can be expected that inhibitors of this enzyme will complement the therapeutic use of HIV protease and reverse transcriptase inhibitors. We have determined the structure of a complex of the HIV-1 integrase core domain with a novel inhibitor, 5ClTEP, 1-(5-chloroindol-3-yl)-3-hydroxy-3-(2H-tetrazol-5-yl)-pro penone, to 2.1-A resolution. The inhibitor binds centrally in the active site of the integrase and makes a number of close contacts with the protein. Only minor changes in the protein accompany inhibitor binding. This inhibitor complex will provide a platform for structure-based design of an additional class of inhibitors for antiviral therapy.

Integrating DNA: transposases and retroviral integrases

Transposable elements appear quite disparate in their organization and in the types of genetic rearrangements they promote. In spite of this diversity, retroviruses and many transposons of both prokaryotes and eukaryotes show clear similarities in the chemical reactions involved in their transposition. This is reflected in the enzymes, integrases and transposases, that catalyze these reactions and that are essential for the mobility of the elements. In this chapter, we examine the structure-function relationships between these enzymes and the different ways in which the individual steps are assembled to produce a complete transposition cycle.

Structure-based mutagenesis of the human immunodeficiency virus type 1 DNA attachment site: effects on integration and cDNA synthesis

Sequences at the ends of linear retroviral cDNA important for integration define the viral DNA attachment (att) site. Whereas determinants of human immunodeficiency virus type 1 (HIV-1) integrase important for replication in T lymphocytes have been extensively characterized, regions of the att site important for viral spread have not been thoroughly examined. Previous transposon-mediated footprinting of preintegration complexes isolated from infected cells revealed enhanced regions of bacteriophage Mu insertion near the ends of HIV-1 cDNA, in the regions of the att sites. Here, we identified the subterminal cDNA sequences cleaved during in vitro footprinting and used this structure-based information together with results of previous work to construct and characterize 24 att site mutant viruses. We found that although subterminal cDNA sequences contributed to HIV-1 replication, the identities of these bases were not critical for integration. In contrast, the phylogenetically conserved CA dinucleotides located at the ends of HIV-1 contributed significantly to virus replication and integration. Mutants containing one intact CA end displayed delays in peak virus growth compared to the wild type. In contrast, double mutant viruses lacking both CAs were replication defective. The A of the CA appeared to be the most critical determinant of integration, because two different U5 mutant viruses containing the substitution of TG for CA partially reverted by changing the G back to A. We also identified a U5 deletion mutant in which the CA played a crucial role in reverse transcription.

Refined solution structure of the C-terminal DNA-binding domain of human immunovirus-1 integrase

The structure of the C-terminal DNA-binding domain of human immunovirus-1 integrase has been refined using nuclear magnetic resonance spectroscopy. The protein is a dimer in solution and shows a well-defined dimer interface. The folding topology of the monomer consists of a five-stranded beta-barrel that resembles that of Src homology 3 domains. Compared with our previously reported structure, the structure is now defined far better. The final 42 structures display a back-bone root mean square deviation versus the average of 0.46 A. Correlation of the structure with recent mutagenesis studies suggests two possible models for DNA binding. Proteins 1999;36:556-564.

High affinity interaction of HIV-1 integrase with specific and non-specific single-stranded short oligonucleotides

Retroviral integrase (IN) catalyzes the integration of double-stranded viral DNA into the host cell genome. The reaction can be divided in two steps: 3'-end processing and DNA strand transfer. Here we studied the effect of short oligonucleotides (ODNs) on human immunodeficiency virus type 1 (HIV-1) IN. ODNs were either specific, with sequences representing the extreme termini of the viral long terminal repeats, or nonspecific. All ODNs were found to competitively inhibit the processing reaction with Ki values in the nM range for the best inhibitors. Our studies on the interaction of IN with ODNs also showed that: (i) besides the 3'-terminal GT, the interaction of IN with the remaining nucleotides of the 21-mer specific sequence was also important for an effective interaction of the enzyme with the substrate; (ii) in the presence of specific ODNs the activity of the enzyme was enhanced, a result which suggests an ODN-induced conformational change of HIV-1 IN.

The mobility of an HIV-1 integrase active site loop is correlated with catalytic activity

Replication of HIV-1 requires the covalent integration of the viral cDNA into the host chromosomal DNA directed by the virus-encoded integrase protein. Here we explore the importance of a protein surface loop near the integrase active site using protein engineering and X-ray crystallography. We have redetermined the structure of the integrase catalytic domain (residues 50-212) using an independent phase set at 1.7 A resolution. The structure extends helix alpha4 on its N-terminal side (residues 149-154), thus defining the position of the three conserved active site residues. Evident in this and in previous structures is a conformationally flexible loop composed of residues 141-148. To probe the role of flexibility in this loop, we replaced Gly 140 and Gly 149, residues that appear to act as conformational hinges, with Ala residues. X-ray structures of the catalytic domain mutants G149A and G140A/G149A show further rigidity of alpha4 and the adjoining loop. Activity assays in vitro revealed that these mutants are impaired in catalysis. The DNA binding affinity, however, is minimally affected by these mutants as assayed by UV cross-linking. We propose that the conformational flexibility of this active site loop is important for a postbinding catalytic step.

HIV integrase structure and function

HIV integrase consists of three domains, the structures of which have been individually determined by X-ray crystallography or NMR spectroscopy. The core domain, spanning residues 50-212, is responsible for the catalytic activity of the enzyme. The crystal structure of a dimer of this domain shows similarity to other proteins that carry out polynucleotidyl transfer, including MuA transposase and RNase H. The small N-terminal domain folds into a dimeric helix-turn-helix structure, which is stabilized by the coordination of zinc with conserved His and Cys residues. The function of this domain is unclear; however, it is required for integration activity and enhances tetramerization in the context of the full-length integrase. The C-terminal domain, which has an SH3-like fold, is involved in DNA binding. The structure of this domain reveals a large saddle-shaped cleft that is formed by dimerization. This cleft contains a number of positively charged residues, and its dimensions are appropriate for accommodating a double-stranded DNA helix. Although the C-terminal domain was originally believed to be involved in target DNA binding, more recent evidence suggests that it may bind to both the ends of the viral DNA and to the target DNA. Although the individual domain structures provide some insights into the function of the protein, a more detailed understanding of the complete mechanism by which integrase binds, cleaves, and transfers DNA requires a greater knowledge of how these domains are arranged in the active multimer.

Multiple integrase functions are required to form the native structure of the human immunodeficiency virus type I intasome

Mu-mediated polymerase chain reaction footprinting was used to investigate the protein-DNA structure of human immunodeficiency virus type I (HIV-I) preintegration complexes. Preintegration complexes were partially purified from cells after using an established coculture infection technique as well as a novel technique using cell-free supernatant from transfected cells as the source of virus. Footprinting revealed that bound proteins protected the terminal 200-250 base pairs of each viral end from nuclease attack. Bound proteins also caused strong transpositional enhancements near each end of HIV-I. In contrast, regions of viral DNA internal to the ends did not show evidence of strong protein binding. The end regions of preintegrative HIV-I apparently form a unique nucleoprotein structure, which we term the intasome to distinguish it from the greater preintegration complex. Our novel system also allowed us to analyze the structure and function of preintegration complexes isolated from cells infected with integrase mutant viruses. Complexes were derived from viruses defective for either integrase catalysis, integrase binding to the viral DNA substrate, or an unknown function in the carboxyl-terminal domain of the integrase protein. None of these mutant complexes supported detectable integration activity. Despite the presence of the mutant integrase proteins in purified samples, none of these nucleoprotein complexes displayed the native intasome structure detected in wild-type preintegration complexes. We conclude that multiple integrase functions are required to form the native structure of the HIV-I intasome in infected cells.