Emerging pollutants in the environment: present and future challenges in biomonitoring, ecological risks and bioremediation

Structural equation modeling for three aspects of green business practices: a case study of Bangladeshi RMG's industry

Green business (GB) had often been regarded as a pervasive trend that underlies the operations and performance of businesses. By portrayal of three aspects view of the green business, this paper evaluates green business approaches within the Bangladeshi ready-made garments (RMG) sector and provides a structured framework for the factors affecting the utilization of green business approaches. This study further evaluates how the environmental, societal, and economic impact derived green business practices. The framework is experimentally tested by the partial least square approach to structural equation modeling (PLS-SEM) concentrated on survey responses quantifying the green business practices within 40 RMG organizations situated in Dhaka and Chittagong, Bangladesh. The findings demonstrate that there is a positive relationship between environmental, social, and economic aspects. More specifically, the PLS-SEM estimation demonstrates that the interaction between environmental and economic sustainability has a substantial proportion of values towards profiling GB practice. Meanwhile, there is a vast gap for profiling the performances of environmental and economic aspects through social aspects within the RMG sectors of Bangladesh. Also, there is a significant difference between the predicted and factual green business adoption tendencies and views among different industrial enterprises, especially for waste management and water pollution based on the findings of the SEM-PLS model. Throughout the context of the rapid growth of socioeconomic development and new technological advancement, social level performance possess comparably weak influences of GB strategy on the within Bangladeshi RMG sectors. In the meantime, as the stricter law has a vital impact on the firm's strategies for becoming more environmentally friendly practices, it instituted as an essential variable for quantifying social sustainability. Moreover, the study recommends some suggestions emphasizing the part of the identified model in the context of encouraging business organizations to indulge in environment-oriented socio-economy actions and thus change the emphasis of potential GB study directions.

Fate and toxicity of pharmaceuticals in water environment: An insight on their occurrence in South Asia

Pharmaceutically active compounds are newly recognized micropollutants which are ubiquitous in aquatic environment mainly due to direct discharge of treated and untreated wastewater from wastewater treatment plants. These contaminants have attracted mounted attention due to their toxic effects on aquatic life. They disrupt biological processes in non-target lower organisms upon exposure. Biodegradation, photo-degradation, and sorption are key processes which determine their fate in the environment. A variety of conventional and advanced treatment processes had been extensively investigated for the removal of pharmaceuticals from wastewater. However, due to structural complexity and varying operating parameters, complete removal seems ideal. Generally, due to high energy requirement of advanced treatment technology, it is considered cost ineffective. Transport of pharmaceutical compounds occurs via aquatic channels whereas sediments and aquatic colloids play a significant role as sinks for these contaminants. The current review provides a critical understanding of fate and toxicity of pharmaceutical compounds and highlights their vulnerability and occurrence in South Asia. Antibiotics, analgesics, and psychiatric drugs were found predominantly in the water environment of South Asian regions. Despite significant advances in understanding pharmaceuticals fate, toxicity, and associated risks since the 1990s, still substantial data gaps in terms of monitoring, human health risks, and legislation exist which presses the need to develop a more in-depth and interdisciplinary understanding of the subject.

Removal of Drugs in Polluted Waters with Char Obtained by Pyrolysis of Hair Waste from the Tannery Process

The presence and final destination of pharmaceutical compounds in waters constitute one of the emerging events in current environmental chemistry. Two widely consumed compounds have been evaluated in this study, amoxicillin (AMOX) and diclofenac (DFC), at a concentration of 200 mg L-1. The presence of both in wastewater has been verified, generating problems in ecosystems and human health. Pyrolysis of hair waste from a tannery process was performed in a fixed-bed reactor. Char was obtained at different operating temperatures (300, 350, 400, and 450 °C), which underwent a characterization of heavy metals and elemental composition. An activation process was applied to the char obtained at 450 °C by means of physicochemical processes and with two chemical agents (KOH and K2CO3). For the removal of drugs, two separate tests were performed, one for 28 days and the other one for 4 h, to assess the efficiency and the percentage of removal. It was found that the char obtained at 450 °C is the one that removes most of both compounds: more than 90% of AMOX and more than 80% of DFC.

Multiplexed Immunosensor Based on the Amperometric Transduction for Monitoring of Marine Pollutants in Sea Water

Environmental pollutants vigilance is one of the main problems that the aquaculture industry has to face with the objective to ensure the quality of their products and prevent entrance in the food chain that finally may arrive to the consumer. Contaminants such as hormones, antibiotics or biocides are especially relevant due to their toxicity, pharmacological effect or hormonal activity that can be considered harmful for the final consumer. The contaminants can be detected in the environment where the food is growing, and their concentration can be found (i.e., seawater) in the range of µg·L⁻¹, ng·L⁻¹ or even in lower concentrations. Thus, sensitive and selective methods for their monitoring are required to avoid their arrival in the food chain. Here, the development of a multiplexed amperometric biosensor is described, based on the use of specific antibodies to reach the necessary detectability to measure the targeted contaminants directly in seawater. The multiplexed immunosensor allows the detection of four relevant pollutants, such as el Irgarol 1051, sulfapyridine, chloramphenicol and estradiol, reaching an IC₅₀ of 5.04 ± 0.29, 3.45 ± 0.29, 4.17 ± 0.44 and 5.94 ± 0.28 µg·L⁻¹, directly measured in seawater.

Untargeted characterisation of dissolved organic matter contributions to rivers from anthropogenic point sources using direct-infusion and high-performance liquid chromatography/Orbitrap mass spectrometry

RATIONALE

Anthropogenic organic inputs to freshwaters can exert detrimental effects on aquatic ecosystems, raising growing concern for both environmental conservation and water security. Current regulation by the EU water framework directive (European Union, 2000/60/EC) relates to organic pollution by monitoring selected micropollutants; however, aquatic ecosystem responses require a comprehensive understanding of dissolved organic matter (DOM) composition. The introduction of high-resolution mass spectrometry (HRMS) is set to greatly increase our understanding of the composition of DOM of both natural and anthropogenic origin derived from diffuse and point sources.

METHODS

DOM was extracted from riverine and treated sewage effluent using solid-phase extraction (SPE) and analysed using dissolved organic carbon analysis, direct-infusion high-resolution mass spectrometry (DI-HRMS) and high-performance liquid chromatography (HPLC)/HRMS. The data obtained were analysed using univariate and multivariate statistics to demonstrate differences in background DOM, anthropogenic inputs and in-river mixing. Compound identifications were achieved based on MS2 spectra searched against on-line databases.

RESULTS

DI-HRMS spectra showed the highly complex nature of all DOM SPE extracts. Classification and visualisation of extracts containing many thousands of individual compounds were achieved using principal component analysis (PCA) and hierarchical cluster analysis. Kruskal-Wallis analyses highlighted significant discriminating ions originating from the sewage treatment works for more in-depth investigation by HPLC/HRMS. The generation of MS2 spectra in HPLC/HRMS provided the basis for identification of anthropogenic compounds including; pharmaceuticals, illicit drugs, metabolites and oligomers, although many thousands of compounds remain unidentified.

CONCLUSIONS

This new approach enables comprehensive analysis of DOM in extracts without any preconceived ideas of the compounds which may be present. This approach has the potential to be used as a high throughput, qualitative, screening method to determine if the composition of point sources differs from that of the receiving water bodies, providing a new approach to the identification of hitherto unrecognised organic contribution to water bodies.

Activated Carbon from Spent Coffee Grounds: A Good Competitor of Commercial Carbons for Water Decontamination

In the framework of the circular economy, spent coffee grounds were converted into powdered activated carbon by means of pyrolysis, using potassium hydroxide as the activating agent. Its adsorption capacity on a panel of phenolic compounds was compared with those of two commercial powdered activated carbons, after preliminary studies on organic dyes with different ionic properties, to assess the affinity between adsorbates and adsorbents. Pseudo-first-order and pseudo-second-order kinetic models were carried out, together with Freundlich and Langmuir isotherms. They were useful to calculate the breakthrough at 5%, 10%, and 50% of adsorption and the partition coefficients for the comparison of performance between different sorbent systems in a less biased manner (e.g., reducing bias associated with operational settings like sorbate concentration and sorbents dosage). The results showed that the removal efficiency for SCGs-AC was comparable with that of the commercial activated carbons with the highest partition coefficients for methylene blue (12,455 mg/g/μM, adsorption capacity = 179 mg/g) and 3-chlorophenol (81.53 mg/g/μM, adsorption capacity = 3765 mg/g). The lower efficiency in bromothymol blue and bisphenol-A adsorption was due to its different morphology and surface properties.

Executing multi-taxa eDNA ecological assessment via traditional metrics and interactive networks

Current approaches to ecological assessment are limited by the traditional morpho-taxonomic methods presently employed and the inability to meet increasing demands for rapid assessments. Advancements in high throughput sequencing now enable rapid high-resolution ecological assessment using environmental DNA (eDNA). Here we test the ability of using eDNA-based ecological assessment methods against traditional assessment of two key indicator groups (diatoms and macroinvertebrates) and show how eDNA across multiple gene regions (COI, rbcL, 12S and 18S) can be used to infer interactive networks that link to ecological assessment criteria. We compared results between taxonomic and eDNA based assessments and found significant positive associations between macroinvertebrate (p < 0.001 R² = 0.645) and diatom (p = 0.015, R² = 0.222) assessment metrics. We further assessed the ability of eDNA based assessment to identify environmentally sensitive genera and found an order of magnitude greater potential for 18S, versus COI or rbcL, to determine environmental filtering of ecologically assessed communities. Lastly, we compared the ability of traditional metrics against co-occurrence network properties of our combined 18S, COI and rbcL indicator genera to infer habitat quality measures currently used by managers. We found that transitivity (network connectivity), linkage density and cohesion were significantly associated with habitat modification scores (HMS), whereas network properties were inconsistent with linking to the habitat quality score (HQS) metric. The incorporation of multi-marker eDNA network assessment opens up a means for finer scale ecological assessment, currently limited using traditional methods. While utilization of eDNA-based assessment is recommended, direct comparisons with traditional approaches are difficult as the methods are intrinsically different and should be treated as such with regards to future research. Overall, our findings show that eDNA can be used for effective ecological assessment while offering a wider range of scope and application compared to traditional assessment methods.

Investigation and assessment of micropollutants and associated biological effects in wastewater treatment processes

Currently, the wastewater treatment plants (WWTPs) attempt to achieve the shifting from general pollution parameters control to reduction of organic micropollutants discharge. However, they have not been able to satisfy the increasing ecological safety needs. In this study, the removal of micropollutants was investigated, and the ecological safety was assessed for a local WWTP. Although the total concentration of 31 micropollutants detected was reduced by 83% using the traditional biological treatment processes, the results did not reflect chemicals that had poor removal efficiencies and low concentrations. Of the five categories of micropollutants, herbicides, insecticides, and bactericides were difficult to remove, pharmaceuticals and UV filters were effectively eliminated. The specific photosynthesis inhibition effect and non-specific bioluminescence inhibition effect from wastewater were detected and evaluated using hazardous concentration where 5% of aquatic organisms are affected. The photosynthesis inhibition effect from wastewater in the WWTP was negligible, even the untreated raw wastewater. However, the bioluminescence inhibition effect from wastewater which was defined as the priority biological effect, posed potential ecological risk. To decrease non-specific biological effects, especially of macromolecular dissolved organic matter, overall pollutant reduction strategy is necessary. Meanwhile, the ozonation process was used to further decrease the bioluminescence inhibition effects from the secondary effluent; ≥ 0.34 g O₃/g DOC of ozone dose was recommended for micropollutants elimination control and ecological safety.

Oxidative stress, biotransformation enzymes and histopathological alterations in Nile tilapia (Oreochromis niloticus) exposed to new and used automotive lubricant oil

Lubricant oils are among oil-based products that are not fully consumed during its use, thereby producing non-biodegradable residues which can cause contamination of natural systems. This study evaluated the toxicity of new and used lubricating oil (0.01 and 0.1 mL L^-1) in adult Nile tilapia (Oreochromis niloticus), by assessing the effects on oxidative stress, biotransformation enzymes (liver and gills), and histopathological alterations on hepatic and pancreatic tissues after 3 and 7 days of exposure. Results showed that 3-days exposure to 0.1 mL L^-1 of used and new lubricating oil increased the activity of superoxide dismutase (SOD) and malondialdehyde (MDA) levels in liver of O. niloticus, respectively. In gills, catalase (CAT) was decreased in fish exposed to 0.1 mL L^-1 of non-used oil after 3 days, but pronounced increases in CAT was detected after 7 days-exposure to both new and used oil. Shorter exposure to both concentrations of new and used oil also raised glutathione-S-transferase activity (GST) in gills. Ethoxyresorufin-O-deethylase (EROD) was induced in liver of fish exposed to 0.1 mL L^-1of used oil after 3 and 7 days, however a reduced response of this enzyme was detected in gills of animals from both oil treatments. In vitro analysis showed that hepatic EROD was inhibited by lubricating oil exposures, with more pronounced responses in treatments containing used oil. Hepatic lesions, such as cytoplasmic vacuolization, nuclei abnormally, changes in hepatocytes shape, steatosis, cholestasis, eosinophilic inclusions and necrosis were mainly increased by 7 days exposure to used lubricating oil at higher concentration.

Sequential combination of nanofiltration and ettringite precipitation for managing sulfate-rich brines

The sequential combination of nanofiltration (NF) and ettringite precipitation to manage sulfate-rich brine is proposed. In this study, NF experiments clearly demonstrated that sulfate-containing wastewater was effectively concentrated by the NF process (concentrate factor, CF > 5) with insignificant membrane fouling. Ettringite precipitation was implemented as an alternative to lime precipitation to process sulfate-rich brine resulting from the NF operation. More than 93% of the sulfate ions were removed by ettringite precipitation, whereas lime precipitation removed less than 28% under the same conditions due to the difference in their solubility. However, with highly concentrated NF brine (CF > 5), the pH and sulfate concentration of the supernatant were higher than the discharge limit. Therefore, optional blending of the supernatant after ettringite precipitation with the NF permeate was proposed to satisfy the discharge limit for sulfate. The sequential operation consisting of NF and ettringite precipitation enables sulfate-rich wastewater to be treated effectively, minimizing its negative impact by reducing the brine volume and enabling the water to be reused.

Spatiotemporal variation in occurrence and co-occurrence of pesticides, hormones, and other organic contaminants in rivers in the Chesapeake Bay Watershed, United States

Investigating the spatiotemporal dynamics of contaminants in surface water is crucial to better understand how introduced chemicals are interacting with and potentially influencing aquatic organisms and environments. Within the Chesapeake Bay Watershed, United States, there are concerns about the potential role of contaminant exposure on fish health. Evidence suggests that exposure to contaminants in surface water is causing immunosuppression and intersex in freshwater fish species. Despite these concerns, there is a paucity of information regarding the complex dynamics of contaminant occurrence and co-occurrence in surface water across both space and time. To address these concerns, we applied a Bayesian hierarchical joint-contaminant model to describe the occurrence and co-occurrence patterns of 28 contaminants and total estrogenicity across six river sites and over three years. We found that seasonal occurrence patterns varied by contaminant, with the highest occurrence probabilities during the spring and summer months. Additionally, we found that the proportion of agricultural landcover in the immediate catchment, as well as stream discharge, did not have a significant effect on the occurrence probabilities of most compounds. Four pesticides (atrazine, metolachlor, fipronil and simazine) co-occurred across sites after accounting for environmental covariates. These results provide baseline information on the contaminant occurrence patterns of several classes of compounds within the Chesapeake Bay Watershed. Understanding the spatiotemporal dynamics of contaminants in surface water is the first step in investigating the effects of contaminant exposure on fisheries and aquatic environments.

Biodegradation of Amoxicillin, Tetracyclines and Sulfonamides in Wastewater Sludge

The removal of antibiotics from the aquatic environment has received great interest. The aim of this study is to examine degradation of oxytetracycline (OTC), tetracycline (TC), chlortetracycline (CTC), amoxicillin (AMO), sulfamethazine (SMZ), sulfamethoxazole (SMX), sulfadimethoxine (SDM) in sludge. Four antibiotic-degrading bacterial strains, SF1 (Pseudmonas sp.), A12 (Pseudmonas sp.), strains B (Bacillus sp.), and SANA (Clostridium sp.), were isolated, identified and tested under aerobic and anaerobic conditions in this study. Batch experiments indicated that the addition of SF1 and A12 under aerobic conditions and the addition of B and SANA under anaerobic conditions increased the biodegradation of antibiotics in sludge. Moreover, the results of repeated addition experiments indicated that the efficiency of the biodegradation of antibiotics using the isolated bacterial strains could be maintained for three degradation cycles. Two groups of potential microbial communities associated with the aerobic and anaerobic degradation of SMX, AMO and CTC in sludge were revealed. Twenty-four reported antibiotics-degrading bacterial genera (Achromobacter, Acidovorax, Acinetobacter, Alcaligenes, Bacillus, Burkholderia, Castellaniella, Comamonas, Corynebacterium, Cupriavidus, Dechloromonas, Geobacter, Gordonia, Klebsiella, Mycobacterium, Novosphingobium, Pandoraea, Pseudomonas, Rhodococcus, Sphingomonas, Thauera, Treponema, Vibrio and Xanthobacter) were found in both the aerobic and anaerobic groups, suggesting that these 24 bacterial genera may be the major antibiotic-degrading bacteria in sludge.

Emerging pollutants (EPs) in Latin América: A critical review of under-studied EPs, case of study -Nonylphenol

Emerging contaminants (EPs) represent a significant risk to human, ecological and environmental health. Although progress has been made in establishing monitoring in environmental matrices, health effects, legislation and control, there are still problems associated with regional bias and the types of EPs commonly assessed, which may underestimate the risk to health. In Latin America there are limited reports on environmental monitoring of EPs and it is generally focused on wastewater. This review identifies the current research deficiencies for emerging contaminants in the Latin American region, and we address the case of nonylphenol as an under-studied EP in the region. Nonylphenol is a degradation product of nonylphenol ethoxylate, which is a surfactant widely used in the manufacture of detergents in Latin America, environmental concentrations have been reported, predominantly in water, and the possible effects on species in this region have been also described. The importance of the review of this compound in the region lies in the fact that the Rotterdam Convention has catalogued nonylphenol as a severely restricted compound, so it is necessary to establish measures for its restriction and change to a sustainable technology. Finally, the example of NP presented in this review highlights the lack of regulation in Latin America regarding to EPs, resulting in the contamination of wastewater, effluents, rivers and drinking water. It is imperative to determine the potential effects, occurrence and concentration levels to improve the regulation of these pollutants in a timely manner.

An analysis of the versatility and effectiveness of composts for sequestering heavy metal ions, dyes and xenobiotics from soils and aqueous milieus

The persistence and bioaccumulation of environmental pollutants in water bodies, soils and living tissues remain alarmingly related to environmental protection and ecosystem restoration. Adsorption-based techniques appear highly competent in sequestering several environmental pollutants. In this review, the recent research findings reported on the assessments of composts and compost-amended soils as adsorbents of heavy metal ions, dye molecules and xenobiotics have been appraised. This review demonstrates clearly the high adsorption capacities of composts for umpteen environmental pollutants at the lab-scale. The main inferences from this review are that utilization of composts for the removal of heavy metal ions, dye molecules and xenobiotics from aqueous environments and soils is particularly worthwhile and efficient at the laboratory scale, and the adsorption behaviors and effectiveness of compost-type adsorbents for agrochemicals (e.g. herbicides and insecticides) vary considerably because of variabilities in structure, topology, bond connectivity, distribution of functional groups and interactions of xenobiotics with the active humic substances in composts. Compost-based field-scale remediation of environmental pollutants is still sparse and arguably much challenging to implement if, furthermore, real-world soil and water contamination issues are to be addressed effectively. Hence, significant research and process development efforts should be promptly geared and intensified in this direction by extrapolating the lab-scale findings in a cost-effective manner.

Ameliorative Effects of Honey, Propolis, Pollen, and Royal Jelly Mixture against Chronic Toxicity of Sumithion Insecticide in White Albino Rats

Sumithion (Fenitrothion) (SUM) is an organophosphorus insecticide used to combat a wide variety of plant pests. Exposure to SUM causes significant toxicity to the brain, liver, kidney, and reproductive organs through, for example, binding to DNA, and it induces DNA damage, which ends with oxidative stress. Therefore, the present study aimed to examine the protective role of bee products: a mixture of honey, propolis, palm pollen, and royal jelly (HPPJ) against SUM-induced toxicity. Twenty-four male albino rats (Rattus norvegicus) were classified into four groups, each containing six rats: control (corn oil), SUM (85 mg/kg; 1/20 LD₅₀), HPPJ, and SUM + HPPJ once daily for 28 consecutive days. Blood samples were gently collected in sterilized ethylenediaminetetraacetic acid (EDTA) tubes for blood picture analyses and tubes without anticoagulant for serum isolation. Serum was used for assays of enzymatic and biochemical characteristics. The results revealed that SUM increased the weights of the liver, kidney, and brain as well as the enzymatic activity of glutathione peroxidase (GP), serum superoxide dismutase (SOD), and glutathione-S-transferase (GST). Additionally, SUM significantly increased the activity of lactate dehydrogenase (LDH), alkaline phosphatase (ALP), and γ-glutamyltransferase (γ-GT) and glucose, uric acid, and creatinine contents, while decreasing the acetylcholine esterase (AChE) activity and total lipids and total protein content. Furthermore, because of the inclusion of phenolic, flavonoids, terpenoids, and sugars, the HPPJ mixture counteracted the hematological, renal, and hepatic toxicity of SUM exposure.

Photocatalytic degradation of a typical neonicotinoid insecticide: nitenpyrum by ZnO nanoparticles under solar irradiation

The photodegradation and mineralization of the nitenpyrum [(E)-N-(6-chloro-3-pyridylmethyl)-N-ethyl-N'-methyl-2-nitrovinylidenediamine], which is one of the most popular neonicotinoid insecticides, were conducted in the presence of ZnO photocatalyst under solar irradiation. An initial nitenpyrum concentration of 10 ppm was completely degraded in the presence of ZnO after 30 min irradiation, while only 70% degradation was observed in the absence of ZnO. The effect of different parameters, for example, amount of ZnO, initial pH, light intensity, reaction temperature, and irradiation time, on the photocatalytic degradation of nitenpyrum was also evaluated. The drop of total organic carbon (TOC) as a consequence of mineralization of nitenpyrum was observed during the photocatalytic process. The kinetics of photocatalytic degradation followed a pseudo-first order law according to Langmuir-Hinshelwood model, and the rate constant is 0.140 min^-1. CO₂, chloride, and nitrate ions were observed as the end-products after completing degradation of nitenpyrum. The four kinds of intermediate products were identified by GC-MS during the decomposition of nitenpyrum. In order to investigate the degradation pathway of nitenpyrum, the point charge and frontier electron density at each atom on the molecule were determined using molecular orbital (MO) stimulation. The degradation mechanism was proposed, based on the identified intermediates. The solar photocatalytic degradation method can become an effective technique for the treatment of nitenpyrum-polluted water.

Sources, presence and potential effects of contaminants of emerging concern in the marine environments of the Great Barrier Reef and Torres Strait, Australia

Current policy and management for marine water quality in the Great Barrier Reef (GBR) in north-eastern Australia primarily focusses on sediment, nutrients and pesticides derived from diffuse source pollution related to agricultural land uses. In addition, contaminants of emerging concern (CECs) are known to be present in the marine environments of the GBR and the adjacent Torres Strait (TS). Current and projected agricultural, urban and industrial developments are likely to increase the sources and diversity of CECs being released into these marine ecosystems. In this review, we evaluate the sources, presence and potential effects of six different categories of CECs known to be present, or likely to be present, in the GBR and TS marine ecosystems. Specifically, we summarize available monitoring, source and effect information for antifouling paints; coal dust and particles; heavy/trace metals and metalloids; marine debris and microplastics; pharmaceuticals and personal care products (PPCPs); and petroleum hydrocarbons. Our study highlights the lack of (available) monitoring data for most of these CECs, and recommends: (i) the inclusion of all relevant environmental data into integrated databases for building marine baselines for the GBR and TS regions, and (ii) the implementation of local, targeted monitoring programs informed by predictive methods for risk prioritization. Further, our spatial representation of the known and likely sources of these CECs will contribute to future ecological risk assessments of CECs to the GBR and TS marine environments, including risks relative to those identified for sediment, nutrients and pesticides.

Construction of luffa sponge-based magnetic carbon nanocarriers for laccase immobilization and its application in the removal of bisphenol A

The raw material of resin, Bisphenol A (BPA), is an endocrine-disrupting compound that can be continuously released into the environment and directly harms health. In this study, luffa sponge was used as the raw material to prepare magnetic carbon chemicals for laccase immobilization and BPA degradation. The MLC-1 was synthesized by one-step carbonization-magnetization method, which showed good magnetic properties and a strong load capacity for laccase. Compared with free laccase, Laccase@MLC-1 showed stronger thermal stability, better acid-tolerate performance and reusability. Moreover, Laccase@MLC-1 showed higher BPA degradation efficiency than free laccase. 100 mg/L of BPA can be completely removed by Laccase@MLC-1 in 4 h, while only 62.70% of BPA was removed by the same amount of free laccase. By improving reuse strategies, a complete BPA degradation ratio was obtained in each reoperation process. All results proved that Laccase@MLC-1 might be a suitable biocatalyst candidate for BPA removal.

Alterations in viability and CYP1A1 expression in SH SY5Y cell line by pollutants present in Madín Dam, Mexico

Currently one of the problems facing global development is the availability of water. Although water is abundant the planet only a small portion is for human use and consumption. The problem is exacerbated due to different factors, mainly: meteorological phenomena, the presence of contaminants in the water and the increase in the number of inhabitants. Potential effects of pollutants not only can affect freshwater biota but also can be implicated in cancer development and neurodegenerative diseases in humans. The study was conducted in the Madín Dam, a reservoir of economic importance for the geographical area in which it is located, as well as catering to the population of nearby areas, and is a place where recreational activities such as fishing and kayaking are carried out. The aim of this study was to identify the toxic effects that the pollutants present in the water of the Madín Dam can generate on a human cell line (SH SY5Y) evaluating the cell viability and the participation of the Aril Hydrocarbon Receptor (AhR) and Pregnane X receptor (PXR) through of the expression of the CYP1A1 and CYP3A4 (canonical genes). In one of the five sites analyzed, cell viability was up to 50%, in this site a decrease in the normal expression of CYP1A1 was observed (p < 0.05) and the CYP3A4 gene was not expressed in the cells SH SY5Y. These results show that the SH SY5Y cell line is a good biomarker for assessing the human toxicity of environmental pollutants and relating it to neurodegenerative diseases.

Environmental threatening concern and efficient removal of pharmaceutically active compounds using metal-organic frameworks as adsorbents

An alarming number of contaminants of emerging concern, including active residues from pharmaceuticals and personal care products (PPCPs), are increasingly being introduced in water systems and environmental matrices due to unavoidable outcomes of modern-day lifestyle. Most of the PPCPs based contaminants are not completely eliminated during the currently used water/wastewater treatment processes. Therefore, highly selective and significant removal of PPCPs from environmental matrices remains a scientific challenge. In recent years, a wide range of metal-organic frameworks (MOFs) and MOF-based nanocomposites have been designed and envisioned for environmental remediation applications. MOF-derived novel cues had shown an adsorptive capability for the extraction and removal of an array of trace constituents in environmental samples. Noteworthy features such as substantial surface area, size, dispersibility, tunable structure, and repeated use capability provide MOFs-derived platform a superiority over in-practice conventional adsorptive materials. This review provides a comprehensive evaluation of the efficient removal or mitigation of various categories of PPCPs by diverse types of MOF-derived adsorbents with suitable examples. The growing research investigations in this direction paves the way for designing more efficient porous nanomaterials that would be useful for the elimination of PPCPs, and separation perspectives.

Immobilization of fluorescent bacterial bioreporter for arsenic detection

Whole-cell bacterial biosensors hold great promise as a practical complementary approach for in-field detection of arsenic. Although there are various bacterial bioreporter systems for arsenic detection, fewer studies reported the immobilization of arsenic bioreporters. This study aimed at determining immobilization of specific bacterial bioreporter in agar and alginate biopolymers to measure level of arsenite and/or arsenate. To achieve sensitive detection, immobilization parameters of polymer concentration and cell density were evaluated. Moreover, by changing the culture medium, immobilized bioreporter cells in minimal medium can detect arsenite while they can detect both arsenite and arsenate in phosphate-limited minimal medium. When optimal parameters were applied, agar and alginate immobilized bioreporter systems can detect arsenite and arsenate concentrations of 10 μg/l and 200 μg/l within 5 h and 2 h, respectively. The results showed that the immobilized bacterial bioreporter systems are able to determine the concentrations of the two abundant species of arsenic; arsenite and arsenate, as opposed to other studies which reported only arsenite detection. This is the first study describe agar hydrogel and alginate bead immobilization of fluorescent arsenic bacterial bioreporter that can detect both arsenite and arsenate at the safe drinking water limit. Thus, this study will enable further steps to be taken towards developing sensitive and selective portable devices to assess environmental arsenic contamination and prevent acute arsenic toxicity.

Identification of emerging contaminants and their transformation products in a moving bed biofilm reactor (MBBR)-based drinking water treatment plant around River Yamuna in India

The prevalence of emerging contaminants of concern in water regimes is very common these days. High anthropogenic intervention is leading to occurrence of various types of microcontaminants of concern in drinking water systems. Their removal using conventional form of treatment systems employed in water treatment plants is not widely researched upon. Their fate in the conventional as well as advanced water treatment system needs to be focused upon for efficient and safe water disposal. Some compounds may leave the system unchanged or some might transform into much more toxic byproduct. Moreover, understanding level of occurrence of these emerging contaminants in source water bodies is also quintessential for assessing their fate in treatment plant itself as well as in the final treated water. Here in this study, the occurrence and removal of various classes of emerging contaminants were investigated in a moving bed biofilm reactor (MBBR)-based advanced drinking water treatment plant (ADWTP) alongside one conventional drinking water treatment plant, both of which use River Yamuna as the source of water. Non-target analysis utilizing high-performance liquid chromatography combined with time of flight (HPLC-QToF) identified more than 300 compounds. Pharmaceuticals accounted for a major fraction (58%) of the identified compounds, followed by plasticizers and insecticides. Nine parent compound and their transformation products were additionally identified using solid-phase extraction followed by analysis using gas chromatography mass spectrometry and HPLC-QToF. The degradation pathway of the parent compounds in MBBR-based ADWTP was also analyzed in depth. The efficiency of each unit process of MBBR-based drinking water treatment plant was studied in terms of removal of few emerging contaminants. Pharmaceutical compound like diclofenac supposedly was persistent, even, toward the end of the treatment train. Semi-quantitative analysis revealed ineffective removal of pyridine, hydrochlorothiazide, and diethyl phthalate in the outlet of ADWTP. ADWTP was able to remove a few emerging contaminants, but a few were recalcitrant. Likewise, it was established that although some parent compounds were degraded, much more toxic transformation products were formed and were prevalent at the end of the treatment.

Supply Systems of Non-Thermal Plasma Reactors. Construction Review with Examples of Applications

A review of the supply systems of non-thermal plasma reactors (NTPR) with dielectric barrier discharge (DBD), atmospheric pressure plasma jets (APPJ) and gliding arc discharge (GAD) was performed. This choice is due to the following reasons: these types of electrical discharges produce non-thermal plasma at atmospheric pressure, the reactor design is well developed and relatively simple, the potential area of application is large, especially in environmental protection processes and biotechnologies currently under development, theses reactors can be powered from similar sources using non-linear transformer magnetic circuits and power electronics systems, and finally, these plasma reactors and their power supply systems, as well as their applications are the subject of research conducted by the author of the review and her team from the Department of Electrical Engineering and Electrotechnology of the Lublin University of Technology, Poland.

Current Trends in the Application of Nanomaterials for the Removal of Emerging Micropollutants and Pathogens from Water

Water resources contamination has a worldwide impact and is a cause of global concern. The need for provision of clean water is becoming more and more demanding. Nanotechnology may support effective strategies for the treatment, use and reuse of water and the development of next-generation water supply systems. The excellent properties and effectiveness of nanomaterials make them particularly suitable for water/wastewater treatment. This review provides a comprehensive overview of the main categories of nanomaterials used in catalytic processes (carbon nanotubes/graphitic carbon nitride (CNT/g-C₃N₄) composites/graphene-based composites, metal oxides and composites, metal–organic framework and commercially available nanomaterials). These materials have found application in the removal of different categories of pollutants, including pharmaceutically active compounds, personal care products, organic micropollutants, as well as for the disinfection of bacterial, viral and protozoa microbial targets, in water and wastewater matrices. Apart from reviewing the characteristics and efficacy of the aforementioned nanoengineered materials for the removal of different pollutants, we have also recorded performance limitations issues (e.g., toxicity, operating conditions and reuse) for their practical application in water and wastewater treatment on large scale. Research efforts and continuous production are expected to support the development of eco-friendly, economic and efficient nanomaterials for real life applications in the near future.

Adverse effects of atrazine, DCMU and metolachlor on phytoplankton cultures and communities at environmentally relevant concentrations using Fast Repetition Rate Fluorescence

The widespread and persistent contamination of freshwater environments by low concentrations of pesticides is a growing concern worldwide. In aquatic environments, herbicide pollution is of greatest concern for phytoplankton, due to their similarities to terrestrial plants. Through the use of Fast Repetition Rate Fluorometry (FRRF) during weeklong experiments on 10 phytoplankton cultures from 4 classes and 4 natural communities, we demonstrate that PSII-inhibiting herbicides, notably atrazine that is extensively used in North America, consistently have effects on freshwater phytoplankton photophysiology at concentrations far below concentrations affecting the most sensitive species in previous studies. The parameters specific to FRRF (Ρ, σ, τ₁, τ₂, τ₃) were those most sensitive to PSII inhibitors, compared to the standard fluorescence parameters derived from other fluorescence protocols such as Pulse Amplitude Modulation (PAM) fluorometry (F₀, F_m, F_v/F_m) and extracted chlorophyll a concentrations. Based on these findings, existing national environmental guidelines and standards are insufficient to adequately prevent adverse effects of atrazine and other PSII inhibiting herbicides on algal physiology in aquatic ecosystems.

Amoxicillin removal by pre-denitrification membrane bioreactor (A/O-MBR): Performance evaluation, degradation by-products, and antibiotic resistant bacteria

Membrane bioreactors (MBRs) are one of the treatment technologies with the potential to remove emerging compounds from wastewater. The present work evaluated the efficiency of an MBR pilot system in removing amoxicillin from synthetic wastewater using a continuous flow pre-denitrification MBR (A/O-MBR) pilot unit. The system operated in three phases: (1) synthetic wastewater and hydraulic retention time (HRT) of 40 h; (2) adding amoxicillin 100 μg L^-1 to the influent, and (3) varying flowrate to HRT of 20 h. Liquid chromatography coupled to high resolution mass spectrometry analysis confirmed the presence of five amoxicillin degradation by-products in the effluent. The addition of amoxicillin did not affect chemical oxygen demand (COD) or dissolved organic carbon (DOC) removal efficiencies. Respirometry showed that amoxicillin level did not inhibit heterotrophic bacteria metabolism. The change in HRT reduced the DOC removal (from 84% to 66%) but did not influence COD (>94%) or total nitrogen (>72%). The amoxicillin and by-products removal decreased from 80% to 54% with HRT change. Adsorption and biodegradation represented the largest removed fraction of the antibiotic in the A/O-MBR system (68%). Ecotoxicity assays showed P. fluorescens was more resistant and E. coli less resistant to amoxicillin residues at effluent sample matrix.

The effect of peroxymonosulfate in WS2 nanosheets for the removal of diclofenac: Information exposure and degradation pathway

The search for a suitable heterogeneous catalyst in peroxymonosulfate (PMS) activation holds tremendous promise for the degradation of organic pollutants. Two-dimensional (2D) transition metal dichalcogenides such as WS₂ exhibit broad applications in heterogeneous catalysis, and we first extended its application in PMS activation in this work. It was found that WS₂ could efficiently activate PMS resulting in the degradation of diclofenac (DCF). The results show that the PMS offers direct oxidation, and WS₂ could initiate PMS to produce singlet oxygen (¹O₂) and superoxide radical (·O₂^-). This resulted in the improved removal of DCF in the WS₂/PMS system. Furthermore, the degradation pathway of DCF was proposed according to the detected intermediates/products and density functional theory (DFT) calculation. Degradation intermediates and the evaluation of product toxicity indicated that the developed WS₂/PMS system was a safe and detoxifying process while also offering efficient DCF removal. This study offers more insight into the development of suitable materials for the activation of PMS and gives clear direction for the degradation of DCF and its toxic intermediates.

Ecotoxicological effects of anthropogenic stressors in subterranean organisms: A review

How anthropogenic stressors affect biodiversity is a central question in a changing world. Subterranean ecosystems and their biodiversity are particularly vulnerable to change, yet, these species are frequently neglected in analyses of global biodiversity and assessments of ecological status and risk. Are these hidden species affected by anthropogenic stressors? Do they survive outside of the current thermal limits of their ecosystems? These and other important questions can be addressed with ecotoxicological testing, relating contaminants and temperature resistance of species with measured environmental concentrations and climatic data. Ecotoxicological knowledge specific to subterranean ecosystems is crucial for establishing thresholds for their protection, but such data are both scarce and scattered. Here, we review the existing ecotoxicological studies of these impacts to subterranean-adapted species. An effort that includes 167 measured endpoints and presents a database containing experimentally derived species' tolerance data for 28 contaminants and temperature, for 46 terrestrial and groundwater species, including fungi and animals. The lack of standard data among the studies is currently the major impediment to evaluate how stressors affect subterranean-adapted species and how differently they respond from their relatives at surface. Improving understanding of ecotoxicological effects on subterranean-adapted species will require extensive analysis of physiological responses to a wide range of untested stressors, standardization of testing protocols and evaluation of exposures under realistic scenarios.

Ultimate Eradication of the Ciprofloxacin Antibiotic from the Ecosystem by Nanohybrid GO/O-CNTs

Eradication of pharmaceutical drugs from the global ecosystem has received remarkable attention due to the extensive horrible consequences on the human immunological system and the high rate of human deaths. The urgent need for drug eradication became the dominant priority for many research institutions worldwide due to the sharp increase of antimicrobial resistance (AMR) in the human body, which inhibits drug effectiveness and leads ultimately to death. Nanohybrid GO/O-CNTs was fabricated from graphene oxide (GO) cross-linked via calcium ions (Ca²⁺) with oxidized carbon nanotubes (O-CNTs) to eradicate the well-known ciprofloxacin antibiotic drug from aqueous solutions. The ciprofloxacin drug is medically prescribed in millions of medical prescriptions every year and typically exists in domestic and wastewaters. Characterization of the nanohybrid GO/O-CNTs was carried out through spectroscopic (Fourier Transform Infrared (FTIR) and X-ray diffraction (XRD)), thermal (Thermogravimetric analysis (TGA) and derivative thermogravimetry (DTG)), and microscopic (scanning electron microscopy (SEM)) techniques. Optimum parameters for the drug eradication process from aqueous solutions were verified and selected as follows: contact time = 4 h, pH = 6.0, temperature = 290 K, %CaCl₂ = 0.5%, GO/O-CNT ratio = 4:1, and adsorbent mass = 1.0 mg. The equilibrium data were fitted to different adsorption isotherms, and the Langmuir isotherm provided the best fit to our data. Dynamic studies demonstrated a pseudo-second-order removal process for the ciprofloxacin drug, and thermodynamic parameters confirmed exothermic drug adsorption (-27.07 kJ/mol) as well as a physisorption process. For the sake of fighting against the generated AMR, our working strategy demonstrated a removal efficiency of 99.2% of the ciprofloxacin drug and drug uptake as high as 512 mg/g.

Potential use of morphological deformities in Chironomus (Diptera: Chironomidae) as a bioindicator of heavy metals pollution in North-East Algeria

Human activities have led to profound changes in aquatic environments and degradation at several levels. Preserving the quality of aquatic environments, their good functioning, and the species that are dependent on them has become a crucial element. In order to monitor the overall health of aquatic ecosystems, it is necessary to develop early indicators of environmental quality. In this work, we have tried to evaluate whether the analysis of morphological deformities affecting Chironomidae larvae could tell us about the state of degradation of water courses that are subjected to different discharges. To do this, water, sediment, and larvae of Chironomidae were sampled in dry weather in August-September of 2017 at three sites located in the North-East of Algeria. The heavy metals in the three compartments as well as the deformities affecting the mentum and mandibles of Chironomus were analyzed. The results showed a metal contamination especially in sediments; the highest values were found in Meboujda River and Seybouse River. The three sites have high deformities incidences, more than 33%, which suggests the presence of toxic stress. This study reflected the relationship between heavy metal concentrations in water, sediments, and deformities larval mouthparts (mentum and mandibles) in Chironomus. The use of deformities in Chironomus sp. can serve as an effective tool for bioassessment of freshwater ecosystems.

TiO2 nanofibres decorated with green-synthesized PAu/Ag@CQDs for the efficient photocatalytic degradation of organic dyes and pharmaceutical drugs

Organic pollutants such as dyes and pharmaceutical drugs have become an environmental menace, particularly in water bodies owing to their unregulated discharge. It is thus required to develop an economically viable and environment-friendly approach for their degradation in water bodies. In this study, for the first time, we report green route-synthesized plasmonic nanostructures (PM-CQDs (where M: Au and Ag)) decorated onto TiO2 nanofibers for the treatment of toxic dye- and pharmaceutical drug-based wastewater. PM-CQDs are efficaciously synthesized using carbon quantum dots (CQDs) as the sole reducing and capping agent, wherein CQDs are derived via a green synthesis approach from Citrus limetta waste. The characteristic electron-donating property of CQDs played a key role in the reduction of Au3+ to Au0 and Ag+ to Ag0 under visible light irradiation to obtain PAu-CQDs and PAg-CQDs, respectively. Thus, the obtained CQDs, PAu-CQDs, and PAg-CQDs are loaded onto TiO2 nanofibers to obtain a PM-CQD/TiO2 nanocomposite (NC), and are further probed via transmission electron microscopy, scanning electron microscopy and UV-visible spectrophotometry. The degradation of organic pollutants and pharmaceutical drugs using methylene blue and erythromycin as model pollutants is mapped with UV-vis and NMR spectroscopy. The results demonstrate the complete MB dye degradation in 20 minutes with 1 mg mL-1 of PAu-CQD/TiO2 NC, which otherwise is 30 minutes for PAg@CQD/TiO2 dose under visible light irradiation. Similarly, the pharmaceutical drug was found to degrade in 150 minutes with PAu-CQD/TiO2 photocatalysts. These findings reveal the enhanced photocatalytic performance of the green-synthesized Au decorated with TiO2 nanofibers and are attributed to the boosted SPR effect and aqueous-phase stability of Au nanostructures. This study opens a new domain of utilizing waste-derived and green-synthesized plasmonic nanostructures for the degradation of toxic/hazardous dyes and pharmaceutical pollutants in water.

Adsorptive interaction of peroxymonosulfate with graphene and catalytic assessment via non-radical pathway for the removal of aqueous pharmaceuticals

Graphene has been applied as a catalyst in peroxymonosulfate (PMS) activation for the removal of pharmaceuticals in water. Firstly, a kinetic adsorption study of PMS was developed, fitting the results to the Elovich's equation. Moreover, the influence of the main variables in the adsorptive process such as pH, initial PMS concentration, and graphene dose were assessed. Secondly, the degradation of diclofenac as a target compound was studied comparing PMS-catalytic versus adsorption processes. PMS-catalytic process enhanced the removal of the micropollutant if compared to adsorption when using a low dose of graphene (less than 50 mg L^-1) or after surface saturation. Studies using radical scavengers suggested the lack of radicals in the process, suggesting the non-radical activation of PMS. Thirdly, the adsorption versus PMS-catalytic processes were also compared for the oxidation of a mixture of three antibiotics (norfloxacin, tetracycline and sulfamethoxazole) with different chemical structure. PMS-catalytic activation was more effective for the removal of those compounds that presented less affinity towards adsorption onto the graphene surface. Finally, characterization of the fresh and PMS-treated material was performed. Graphene demonstrated to be stable after its use as catalysts in PMS activation, suffering only slight transformation of the surface oxidation groups.

Sensors Applied for the Detection of Pesticides and Heavy Metals in Freshwaters

Water is essential for every life living on the planet. However, we are facing a more serious situation such as water pollution since the industrial revolution. Fortunately, many efforts have been done to alleviate/restore water quality in freshwaters. Numerous sensors have been developed to monitor the dynamic change of water quality for ecological, early warning, and protection reasons. In the present review, we briefly introduced the pollution status of two major pollutants, i.e., pesticides and heavy metals, in freshwaters worldwide. Then, we collected data on the sensors applied to detect the two categories of pollutants in freshwaters. Special focuses were given on the sensitivity of sensors indicated by the limit of detection (LOD), sensor types, and applied waterbodies. Our results showed that most of the sensors can be applied for stream and river water. The average LOD was72.53±12.69 ng/ml (n=180) for all pesticides, which is significantly higher than that for heavy metals (65.36±47.51 ng/ml,n=117). However, the LODs of a considerable part of pesticides and heavy metal sensors were higher than the criterion maximum concentration for aquatic life or the maximum contaminant limit concentration for drinking water. For pesticide sensors, the average LODs did not differ among insecticides (63.83±17.42 ng/ml,n=87), herbicides (98.06±23.39 ng/ml,n=71), and fungicides (24.60±14.41 ng/ml,n=22). The LODs that differed among sensor types with biosensors had the highest sensitivity, while electrochemical optical and biooptical sensors showed the lowest sensitivity. The sensitivity of heavy metal sensors varied among heavy metals and sensor types. Most of the sensors were targeted on lead, cadmium, mercury, and copper using electrochemical methods. These results imply that future development of pesticides and heavy metal sensors should (1) enhance the sensitivity to meet the requirements for the protection of aquatic ecosystems and human health and (2) cover more diverse pesticides and heavy metals especially those toxic pollutants that are widely used and frequently been detected in freshwaters (e.g., glyphosate, fungicides, zinc, chromium, and arsenic).

Cosmetics with hormonal composition for bioindicators Artemia salina L. and Allium cepa L. toxic potential

The emerging pollutants cover a wide range of synthetic chemicals that are indispensable to modern society but with little known effects for aquatic animals and for people who consume polluted waters with these products. Gels manipulated with hormones are widely used for hormone replacement, muscle growth, among other purposes. However, only a small part of these hormones are absorbed into the skin, and so these can be transferred to the domestic sewage during the washing of exposed body regions. Thus, the aim of this study was to evaluate the toxicity levels for the bioindicator Artemia salina L., and cytotoxicity and mutagenicity for the bioindicator Allium cepa L. of gels handled with 1% testosterone and 0.1% estradiol. Data from immobile/dead A. salina numbers after 24 h of exposure showed that the highest concentrations of testosterone (10 and 25 μg/mL) and the highest concentration of estradiol (15 μg/mL) were toxic to this bioindicator. For the bioindicator A. cepa, mitotic indices and chromosomal aberrations did not indicate statistical differences between the groups treated with the testosterone gels (1, 10, 50 μg/mL) and estradiol (0.03, 0.30, 1.5 μg/mL) and the control group. However, all concentrations of the testosterone-containing gel decreased the percentage of cell division in relation to the time 0 h of each treatment and to the time 24 h of the negative control. Therefore, it is concluded that rivers or aquatic environments can be polluted if wastewater with the toxic concentrations found of these hormonal gels is discarded without previous treatment, compromising the life of organisms that live there. And, it encourages the development of techniques for treating sewage and water to reduce/eliminate the hormones present in them.

Subacute dermal toxicity of perfluoroalkyl carboxylic acids: comparison with different carbon-chain lengths in human skin equivalents and systemic effects of perfluoroheptanoic acid in Sprague Dawley rats

Perfluoroalkyl and polyfluoroalkyl substances (PFASs) are used in various fields but raise concerns regarding human health and environmental consequences. Among PFASs, perfluorooctanoic acid (PFOA) and short-chain perfluoroalkyl carboxylic acids (SC PFCAs) are detectable in skin-contact consumer products and have dermal absorption potential. Here, we investigated the effects of dermal exposure to PFOA and SC PFCAs using in vitro and in vivo models. Human skin equivalents were topically treated with 0.25 mM and 2.5 mM PFOA and SC PFCAs (perfluoropentanoic acid, PFPeA; perfluorohexanoic acid, PFHxA; and perfluoroheptanoic acid, PFHpA) for 6 days, and cell viability, interleukin (IL)-1α, oxidative stress markers (malondialdehyde, MDA; and 8-hydroxydeoxyguanosine, 8-OHdG), and histopathology were examined. MDA levels were significantly higher in the PFASs groups than in controls. Compared with SC PFCAs, 2.5 mM PFOA caused more IL-1α (p < 0.001) release, decreased skin thickness and microscopic abnormalities. To evaluate systemic effects, Sprague Dawley (SD) rats were dermally treated with 250 and 1000 mg/kg PFHpA for 2 weeks and clinical and anatomic pathology were assessed. At 1000 mg/kg, 83% of the rats died, with severe ulcerative dermatitis at the application site. Adverse PFHpA-treated systemic changes were observed in the kidney, liver and testes, and histopathologic lesions such as renal tubular necrosis, hepatocellular necrosis, and germ cell degeneration were seen at 250 and 1000 mg/kg. Our study suggests that SC PFCAs have fewer effects on the skin than PFOA, but SC PFCAs can have adverse effects on major organs with systemic exposure at high concentrations.

Dual adsorbent-photocatalytic keratin–TiO2 nanocomposite for trimethoprim removal from wastewater

A keratin hydrogel with immersed TiO₂ nanoparticles was developed for the adsorption-photocatalytic degradation of the emerging pollutant trimethoprim.

Enhanced reductive removal of ciprofloxacin in pharmaceutical wastewater using biogenic palladium nanoparticles by bubbling H2

To treat waste with waste and efficiently remove the organic pollutant, waste palladiums(ii) were adsorbed and reduced on microorganism surface to catalyze the reductive removal of ciprofloxacin in pharmaceutical wastewater. By optimizing conditions such as pH and temperature, the amount of biogenic palladium adsorbed and reduced on E. coli reached 139.48 mg g⁻¹ (Pd/microorganisms). Moreover, most of the Pd(ii) was reduced to nanometer-sized Pd(0) as characterized by TEM and SEM with EDXA. Using the obtained biogenic palladium, the reductive removal of ciprofloxacin is up to 87.70% at 25 °C, 3.03 folds of that achieved in the absence of H₂. The results show that waste E. coli microorganisms can efficiently adsorb and remove waste Pd(ii) and produce Bio-Pd nanoparticle catalysts in the presence of H₂. This biogenic palladium presents high catalytic activity and great advantages in the reductive degradation of ciprofloxacin. Our method can also be applied to other waste metal ions to prepare the biogenic metals, facilitate their recovery and reuse in degrading organic pollutants in wastewater to achieve “treating waste using waste”.

A solution has been successfully introduced to three key challenges from the wastewater containing waste microorganisms, metal and ciprofloxacin, respectively.

Recent trends of MnO2-derived adsorbents for water treatment: a review

Over the years, manganese dioxide (MnO₂) and its different allotropes have gained significant research attention in the field of wastewater treatment because of their exciting physicochemical properties.

Fast-developing machine learning support complex system research in environmental chemistry

Machine learning will radically accelerate analysis of complex material networks in environmental chemistry.

A novel discovery of a heterogeneous Fenton-like system based on natural siderite: A wide range of pH values from 3 to 9

Natural iron-bearing minerals have been proven to be effective for activating H₂O₂ to produce OH, which can be used to degrade organic pollutants. In this study, the performance of siderite to degrade sodium sulfadiazine via catalytic H₂O₂ degradation was investigated at different solution pH values from 3 to 9. An interesting discovery was made: the performance of the siderite-H₂O₂ system was excellent under acidic, neutral, and even alkaline conditions. The influence of various factors (e.g. initial concentration, anions, natural organic matters, etc.) on the system under different pH conditions was investigated, which confirmed that siderite exhibited an excellent catalytic performance. By combining EPR characterization with scavenger research, it was proposed that dissolved iron (Fe²⁺) mainly initiated the homogenous Fenton reaction to degrade pollutants under acidic conditions, while structural Fe²⁺ species present in siderite triggered Fenton-like reactions under neutral or even alkaline conditions. From the SEM and XPS characterizations, oxidation and dissolution of Fe²⁺ on the surface were also observed, confirming our inference concerning the different reaction mechanisms. The experimental findings show that this siderite-H₂O₂ system can be used in solutions with pH values from 3 to 9 and that siderite plays a positive role in soil and groundwater remediation when H₂O₂ is used as an oxidant.