Cellulose, cellulases and cellulosomes

Crystal Structure and Binding Properties of the Serratia marcescens Chitin-binding Protein CBP21

Chitin proteins are commonly found in bacteria that utilize chitin as a source of energy. CBP21 is a chitin-binding protein from Serratia marcescens, a Gram-negative soil bacterium capable of efficient chitin degradation. When grown on chitin, S. marcescens secretes large amounts of CBP21, along with chitin-degrading enzymes. In an attempt to understand the molecular mechanism of CBP21 action, we have determined its crystal structure at 1.55 angstroms resolution. This is the first structure to be solved of a family 33 carbohydrate-binding module. The structure reveals a "budded" fibronectin type III fold consisting of two beta-sheets, arranged as a beta-sheet sandwich, with a 65-residue "bud" consisting of three short helices, located between beta-strands 1 and 2. Remarkably, conserved aromatic residues that have been suggested previously to play a role in chitin binding were mainly found in the interior of the protein, seemingly incapable of interacting with chitin, whereas the structure revealed a surface patch of highly conserved, mainly hydrophilic residues. The roles of six of these conserved surface-exposed residues (Tyr-54, Glu-55, Glu-60, His-114, Asp-182, and Asn-185) were probed by site-directed mutagenesis and subsequent binding studies. All single point mutations lowered the affinity of CBP21 for beta-chitin, as shown by 3-8-fold increases in the apparent binding constant. Thus, binding of CBP21 to chitin seems to be mediated primarily by conserved, solvent-exposed, polar side chains.

Variation of xylanosomal subunit composition of Streptomyces olivaceoviridis by nitrogen sources

Besides affecting the xylanases production, different nitrogen sources present in the media also caused changes in the xylanosomal subunit composition of Streptomyces olivaceoviridis E-86. Four xylanosome fractions, purified from the culture supernatant of S. olivaceoviridis E-86 grown on different nitrogen sources, exhibited high specificity towards different xylans and were composed of different subunits. Thus, S. olivaceoviridis E-86 regulates the expression of xylanase activity and varies the xylanosome composition according to the nitrogen sources possibly through the action of the secreted proteases.

Enhancement of tyrosinase inhibition of the extract of Veratrum patulum using cellulase

Inhibitors of melanin biosynthesis were screened by using three different methods. The extract of Veratrum patulum contains hydroxystilbene compounds that are potent tyrosinase inhibitors. We evaluated the enzyme inhibitory property on the mushroom tyrosinase of hydroxystilbene compounds including resveratrol, oxyresveratrol, and their analogs. Biotransformation using cellulase of the whole extract brought about an increase in the inhibitory activity of the products on mushroom tyrosinase. The enhancement of tyrosinase inhibition is supposed to increase the concentration of aglycon, which has superior inhibitory activity to its glycoside. Eventually, melanin biosynthesis was inhibited by the enhanced tyrosinase inhibitory activity of the extract. This result indicated that deglycosylation of stilbene compounds has exerted more effective inhibition on the enzyme than that of the unprocessed plant extract.

Structural and biochemical studies of GH family 12 cellulases: improved thermal stability, and ligand complexes

In this review we will describe how we have gathered structural and biochemical information from several homologous cellulases from one class of glycoside hydrolases (GH family 12), and used this information within the framework of a protein-engineering program for the design of new variants of these enzymes. These variants have been characterized to identify some of the positions and the types of mutations in the enzymes that are responsible for some of the biochemical differences in thermal stability and activity between the homologous enzymes. In this process we have solved the three-dimensional structure of four of these homologous GH 12 cellulases: Three fungal enzymes, Humicola grisea Cel12A, Hypocrea jecorina Cel12A and Hypocrea schweinitzii Cel12A, and one bacterial, Streptomyces sp. 11AG8 Cel12A. We have also determined the three-dimensional structures of the two most stable H. jecorina Cel12A variants. In addition, four ligand-complex structures of the wild-type H. grisea Cel12A enzyme have been solved and have made it possible to characterize some of the interactions between substrate and enzyme. The structural and biochemical studies of these related GH 12 enzymes, and their variants, have provided insight on how specific residues contribute to protein thermal stability and enzyme activity. This knowledge can serve as a structural toolbox for the design of Cel12A enzymes with specific properties and features suited to existing or new applications.

Kinetic and structural optimization to catalysis at low temperatures in a psychrophilic cellulase from the Antarctic bacterium Pseudoalteromonas haloplanktis

The cold-adapted cellulase CelG has been purified from the culture supernatant of the Antarctic bacterium Pseudoalteromonas haloplanktis and the gene coding for this enzyme has been cloned, sequenced and expressed in Escherichia coli. This cellulase is composed of three structurally and functionally distinct regions: an N-terminal catalytic domain belonging to glycosidase family 5 and a C-terminal cellulose-binding domain belonging to carbohydrate-binding module family 5. The linker of 107 residues connecting both domains is one of the longest found in cellulases, and optimizes substrate accessibility to the catalytic domain by drastically increasing the surface of cellulose available to a bound enzyme molecule. The psychrophilic enzyme is closely related to the cellulase Cel5 from Erwinia chrysanthemi. Both kcat and kcat/K(m) values at 4 degrees C for the psychrophilic cellulase are similar to the values for Cel5 at 30-35 degrees C, suggesting temperature adaptation of the kinetic parameters. The thermodynamic parameters of activation of CelG suggest a heat-labile, relatively disordered active site with low substrate affinity, in agreement with the experimental data. The structure of CelG has been constructed by homology modelling with a molecule of cellotetraose docked into the active site. No structural alteration related to cold-activity can be found in the catalytic cleft, whereas several structural factors in the overall structure can explain the weak thermal stability, suggesting that the loss of stability provides the required active-site mobility at low temperatures.

Clostridium cellulolyticum: model organism of mesophilic cellulolytic clostridia

Clostridium cellulolyticum ATCC 35319 is a non-ruminal mesophilic cellulolytic bacterium originally isolated from decayed grass. As with most truly cellulolytic clostridia, C. cellulolyticum possesses an extracellular multi-enzymatic complex, the cellulosome. The catalytic components of the cellulosome release soluble cello-oligosaccharides from cellulose providing the primary carbon substrates to support bacterial growth. As most cellulolytic bacteria, C. cellulolyticum was initially characterised by limited carbon consumption and subsequent limited growth in comparison to other saccharolytic clostridia. The first metabolic studies performed in batch cultures suggested nutrient(s) limitation and/or by-product(s) inhibition as the reasons for this limited growth. In most recent investigations using chemostat cultures, metabolic flux analysis suggests a self-intoxication of bacterial metabolism resulting from an inefficiently regulated carbon flow. The investigation of C. cellulolyticum physiology with cellobiose, as a model of soluble cellodextrin, and with pure cellulose, as a carbon source more closely related to lignocellulosic compounds, strengthen the idea of a bacterium particularly well adapted, and even restricted, to a cellulolytic lifestyle. The metabolic flux analysis from continuous cultures revealed that (i) in comparison to cellobiose, the cellulose hydrolysis by the cellulosome introduces an extra regulation of entering carbon flow resulting in globally lower metabolic fluxes on cellulose than on cellobiose, (ii) the glucose 1-phosphate/glucose 6-phosphate branch point controls the carbon flow directed towards glycolysis and dissipates carbon excess towards the formation of cellodextrins, glycogen and exopolysaccharides, (iii) the pyruvate/acetyl-CoA metabolic node is essential to the regulation of electronic and energetic fluxes. This in-depth analysis of C. cellulolyticum metabolism has permitted the first attempt to engineer metabolically a cellulolytic microorganism.

Pinpoint mapping of recognition residues on the cohesin surface by progressive homologue swapping

The high affinity cohesin-dockerin interaction dictates the suprastructural assembly of the multienzyme cellulosome complex. The connection between affinity and species specificity was studied by exploring the recognition properties of two structurally related cohesin species of divergent specificity. The cohesins were examined by progressive rounds of swapping, in which corresponding homologous stretches were interchanged. The specificity of binding of the resultant chimeric cohesins was determined by enzyme-linked affinity assay and complementary protein microarray. In succeeding rounds, swapped segments were systematically contracted, according to the binding behavior of previously generated chimeras. In the fourth and final round we discerned three residues, reputedly involved in interspecies binding specificity. By replacing only these three residues, we were able to convert the specificity of the resultant mutated cohesin, which bound preferentially to the rival dockerin with approximately 20% capacity of the wild-type interaction. These residues represent but 3 of the 16 contact residues that participate in the cohesin-dockerin interaction. This approach allowed us to differentiate, in a structure-independent fashion, between residues critical for interspecies recognition and binding residues per se.

A novel Acetivibrio cellulolyticus anchoring scaffoldin that bears divergent cohesins

Sequencing of a cellulosome-integrating gene cluster in Acetivibrio cellulolyticus was completed. The cluster contains four tandem scaffoldin genes (scaA, scaB, scaC, and scaD) bounded upstream and downstream, respectively, by a presumed cellobiose phosphorylase and a nucleotide methylase. The sequences and properties of scaA, scaB, and scaC were reported previously, and those of scaD are reported here. The scaD gene encodes an 852-residue polypeptide that includes a signal peptide, three cohesins, and a C-terminal S-layer homology (SLH) module. The calculated molecular weight of the mature ScaD is 88,960; a 67-residue linker segment separates cohesins 1 and 2, and two approximately 30-residue linkers separate cohesin 2 from 3 and cohesin 3 from the SLH module. The presence of an SLH module in ScaD indicates its role as an anchoring protein. The first two ScaD cohesins can be classified as type II, similar to the four cohesins of ScaB. Surprisingly, the third ScaD cohesin belongs to the type I cohesins, like the seven ScaA cohesins. ScaD is the first scaffoldin to be described that contains divergent types of cohesins as integral parts of the polypeptide chain. The recognition properties among selected recombinant cohesins and dockerins from the different scaffoldins of the gene cluster were investigated by affinity blotting. The results indicated that the divergent types of ScaD cohesins also differ in their preference of dockerins. ScaD thus plays a dual role, both as a primary scaffoldin, capable of direct incorporation of a single dockerin-borne enzyme, and as a secondary scaffoldin that anchors the major primary scaffoldin, ScaA and its complement of enzymes to the cell surface.

The bacterial scaffoldin: structure, function and potential applications in the nanosciences

Natural protein complexes may provide the best templates for nanometer-scale technology and new biomaterials. The bacterial cellulosome is becoming a well-understood multi-protein complex found in cellulolytic microorganisms. The scaffoldin subunits of the bacterial cellulosome function to organize and position other protein subunits into the complex. The scaffoldins can also serve as an attachment device for harnessing the cellulosome onto the cell surface and/or for its targeting to substrate. Biochemical and molecular biological evidence have identified a receptor/adaptor type of protein domain pair, called "cohesin and dockerin," which is responsible for cellulosome self-assembly. The recognition between cohesin and dockerin is generally type and/or species specific. More than 80 cohesin and 100 dockerin sequences have been found, mostly from anaerobic bacteria. X-ray crystallography and NMR have been used to determine the three-dimensional structures of representative cohesin and dockerin domains, respectively. The cohesin peptide is about 140 amino acids in length and highly conserved in sequence and domain structure. The dockerin domain comprises about 70 amino acids and contains two 22 amino acid duplicated regions, each of which includes an "F-hand" modification of the EF-hand calcium-binding motif. Biochemical evidence and site-directed mutagenesis have confirmed that the two F-hand motifs are required for function and calcium dependence; at least two amino acids from each motif are critical for cohesin-dockerin recognition. In this report, we review the structure and function of the scaffoldin of the bacterial cellulosome and emphasize a detailed sequence analysis of the cohesin and dockerin domains. We also speculate about potential applications in nanoscience that may be based on cohesin-dockerin recognition.

Electrotransformation of Clostridium thermocellum

Electrotransformation of several strains of Clostridium thermocellum was achieved using plasmid pIKm1 with selection based on resistance to erythromycin and lincomycin. A custom-built pulse generator was used to apply a square 10-ms pulse to an electrotransformation cuvette consisting of a modified centrifuge tube. Transformation was verified by recovery of the shuttle plasmid pIKm1 from presumptive transformants of C. thermocellum with subsequent PCR specific to the mls gene on the plasmid, as well as by retransformation of Escherichia coli. Optimization carried out with strain DSM 1313 increased transformation efficiencies from <1 to (2.2 +/- 0.5) x 10(5) transformants per micro g of plasmid DNA. Factors conducive to achieving high transformation efficiencies included optimized periods of incubation both before and after electric pulse application, chilling during cell collection and washing, subculture in the presence of isoniacin prior to electric pulse application, a custom-built cuvette embedded in an ice block during pulse application, use of a high (25-kV/cm) field strength, and induction of the mls gene before plating the cells on selective medium. The protocol and preferred conditions developed for strain DSM 1313 resulted in transformation efficiencies of (5.0 +/- 1.8) x 10(4) transformants per micro g of plasmid DNA for strain ATCC 27405 and approximately 1 x 10(3) transformants per micro g of plasmid DNA for strains DSM 4150 and 7072. Cell viability under optimal conditions was approximately 50% of that of controls not exposed to an electrical pulse. Dam methylation had a beneficial but modest (7-fold for strain ATCC 27405; 40-fold for strain DSM 1313) effect on transformation efficiency. The effect of isoniacin was also strain specific. The results reported here provide for the first time a gene transfer method functional in C. thermocellum that is suitable for molecular manipulations involving either the introduction of genes associated with foreign gene products or knockout of native genes.

ScaC, an adaptor protein carrying a novel cohesin that expands the dockerin-binding repertoire of the Ruminococcus flavefaciens 17 cellulosome

A new gene, designated scaC and encoding a protein carrying a single cohesin, was identified in the cellulolytic rumen anaerobe Ruminococcus flavefaciens 17 as part of a gene cluster that also codes for the cellulosome structural components ScaA and ScaB. Phylogenetic analysis showed that the sequence of the ScaC cohesin is distinct from the sequences of other cohesins, including the sequences of R. flavefaciens ScaA and ScaB. The scaC gene product also includes at its C terminus a dockerin module that closely resembles those found in R. flavefaciens enzymes that bind to the cohesins of the primary ScaA scaffoldin. The putative cohesin domain and the C-terminal dockerin module were cloned and overexpressed in Escherichia coli as His(6)-tagged products (ScaC-Coh and ScaC-Doc, respectively). Affinity probing of protein extracts of R. flavefaciens 17 separated in one-dimensional and two-dimensional gels with recombinant cohesins from ScaC and ScaA revealed that two distinct subsets of native proteins interact with ScaC-Coh and ScaA-Coh. Furthermore, ScaC-Coh failed to interact with the recombinant dockerin module from the enzyme EndB that is recognized by ScaA cohesins. On the other hand, ScaC-Doc was shown to interact specifically with the recombinant cohesin domain from ScaA, and the ScaA-Coh probe was shown to interact with a native 29-kDa protein spot identified as ScaC by matrix-assisted laser desorption ionization-time of flight mass spectrometry. These results suggest that ScaC plays the role of an adaptor scaffoldin that is bound to ScaA via the ScaC dockerin module, which, via the distinctive ScaC cohesin, expands the range of proteins that can bind to the ScaA-based enzyme complex.

Theoretical and experimental studies on the adsorption of aromatic compounds onto cellulose

The adsorption of several aromatic compounds over microcrystalline cellulose was studied by molecular modeling and experimentally using gas chromatography. Experimental adsorption enthalpies were obtained from an equation based on Clausius-Clapeyron formalism and the temperature dependence of retention volume at infinite dilution. Four different cellulose surfaces (three crystalline (110, 100, and 010) and one amorphous) were modeled. Overall strong agreement was observed between the experimental and theoretical work with 84% of the adsorbate-cellulose systems having differences between measured and predicted values of less than 20%. Based on both calculated and experimental data, a morphology for the microcrystalline cellulose as a weighted combination of the four surfaces was proposed: 39% (110), 28% (100), 10% (010), and 23% amorphous. By adopting this distribution, differences between experimental and weighted average predicted adsorption energies were 10% or less for 14 out of 17 compounds; a maximum of 15% was observed for guaiacol. Experimental results for monosubstituted aromatic compounds revealed that adsorption enthalpies are related to the hydrophilic/hydrophobic character of the substituent groups: 3.5 kJ mol(-1) for a methyl group, 15.7 kJ mol(-1) for a double bond, 21.0 kJ mol(-1) for a methoxyl group, 22.8 kJ mol(-1) for a carbonyl group, and 27.6 kJ mol(-1) for a hydroxyl group. These tendencies were confirmed by modeling, except for the aldehyde carbonyl group, where an overestimation of 10.8 kJ mol(-1) was observed. Analysis of experimental and predicted adsorption enthalpies of multisubstituted aromatic compounds suggests that the efficiency of their interaction with cellulose depends on a compromise between the roughness of the cellulose surface and their conformational adaptability.

Site-specific and reversible anchoring of active proteins onto cellulose using a cellulosome-like complex

Protein engineering strategies facilitating controlled and spontaneous assembly of macromolecular complexes are of great interest for the design of artificial multi-enzyme systems of pre-defined composition. Here we have combined affinity proteins from different sources to achieve specific and reversible anchoring of affinity domain-tagged reporter proteins to a cellulose-anchored fusion protein. The design principle mimics the architecture of macromolecular cellulosome complexes produced by some cellulolytic microbes. A fusion protein between a cellulose-binding module (CBM1Cel6A) of the Trichoderma reesei cellobiohydrolase Cel6A and a five-domain staphylococcal protein A (SPA) was constructed to serve as platform for docking of easily detectable reporter proteins onto cellulose surfaces. In turn, the reporter proteins were produced as fusions to two copies of a SPA-binding affinity protein (an affibody denoted Z(SPA-1)), selected from a phage display library constructed by combinatorial protein engineering. In a series of experiments, involving repeated washing and low pH elution, affinity-tagged Enhanced Green Fluorescent Protein (EGFP) and Fusarium solani pisi lipase cutinase reporter proteins were both found to be specifically directed from solution to the same region of a cellulose filter paper where SPA-CBM1Cel6A fusion protein had been previously applied. This showed that the SPA-CBM1Cel6A fusion protein had been stably anchored to the cellulose surface without loss of binding capacity and that the interaction between SPA and the Z(SPA-1) affibody domains was selective. The generality of this biospecificity-driven system for assembly applications is discussed.

Architecture of the Bacteroides cellulosolvens cellulosome: description of a cell surface-anchoring scaffoldin and a family 48 cellulase

A large gene downstream of the primary Bacteroides cellulosolvens cellulosomal scaffoldin (cipBc, now renamed scaA) was sequenced. The gene, termed scaB, contained an N-terminal leader peptide followed by 10 type I cohesins, an "X" domain of unknown structure and function, and a C-terminal S-layer homology (SLH) surface-anchoring module. In addition, a previously identified gene in a different part of the genome, encoding for a dockerin-borne family 48 cellulosomal glycoside hydrolase (Cel48), was sequenced completely, and a putative cellulosome-related family 9 glycosyl hydrolase was detected. Recombinant fusion proteins, comprising dockerins derived from either the ScaA scaffoldin or Cel48, were overexpressed. Their interaction with ScaA and ScaB cohesins was examined by immunoassay. The results indicated that the ScaB type I cohesin of the new anchoring protein binds selectively to the ScaA dockerin, whereas the Cel48 dockerin binds specifically to the type II ScaA cohesin 5. Thus, by virtue of the 11 type II ScaA cohesins and the 10 type I ScaB cohesins, the relatively simple two-component cellulosome-integrating complex would potentially incorporate 110 enzyme molecules onto the cell surface via the ScaB SLH module. Compared to previously described cellulosome systems, the apparent roles of the B. cellulosolvens cohesins are reversed, in that the type II cohesins are located on the enzyme-binding primary scaffoldin, whereas the type I cohesins are located on the anchoring scaffoldin. The results underscore the extensive diversity in the supramolecular architecture of cellulosome systems in nature.

Ruminococcus albus 8 mutants defective in cellulose degradation are deficient in two processive endocellulases, Cel48A and Cel9B, both of which possess a novel modular architecture

The cellulolytic bacterium Ruminococcus albus 8 adheres tightly to cellulose, but the molecular biology underpinning this process is not well characterized. Subtractive enrichment procedures were used to isolate mutants of R. albus 8 that are defective in adhesion to cellulose. Adhesion of the mutant strains was reduced 50% compared to that observed with the wild-type strain, and cellulose solubilization was also shown to be slower in these mutant strains, suggesting that bacterial adhesion and cellulose solubilization are inextricably linked. Two-dimensional polyacrylamide gel electrophoresis showed that all three mutants studied were impaired in the production of two high-molecular-mass, cell-bound polypeptides when they were cultured with either cellobiose or cellulose. The identities of these proteins were determined by a combination of mass spectrometry methods and genome sequence data for R. albus 8. One of the polypeptides is a family 9 glycoside hydrolase (Cel9B), and the other is a family 48 glycoside hydrolase (Cel48A). Both Cel9B and Cel48A possess a modular architecture, Cel9B possesses features characteristic of the B(2) (or theme D) group of family 9 glycoside hydrolases, and Cel48A is structurally similar to the processive endocellulases CelF and CelS from Clostridium cellulolyticum and Clostridium thermocellum, respectively. Both Cel9B and Cel48A could be recovered by cellulose affinity procedures, but neither Cel9B nor Cel48A contains a dockerin, suggesting that these polypeptides are retained on the bacterial cell surface, and recovery by cellulose affinity procedures did not involve a clostridium-like cellulosome complex. Instead, both proteins possess a single copy of a novel X module with an unknown function at the C terminus. Such X modules are also present in several other R. albus glycoside hydrolases and are phylogentically distinct from the fibronectin III-like and X modules identified so far in other cellulolytic bacteria.

The cellulosomes: multienzyme machines for degradation of plant cell wall polysaccharides

The discrete multicomponent, multienzyme cellulosome complex of anaerobic cellulolytic bacteria provides enhanced synergistic activity among the different resident enzymes to efficiently hydrolyze intractable cellulosic and hemicellulosic substrates of the plant cell wall. A pivotal noncatalytic subunit called scaffoldin secures the various enzymatic subunits into the complex via the cohesin-dockerin interaction. The specificity characteristics and tenacious binding between the scaffoldin-based cohesin modules and the enzyme-borne dockerin domains dictate the supramolecular architecture of the cellulosome. The diversity in cellulosome architecture among the known cellulosome-producing bacteria is manifest in the arrangement of their genes in either multiple-scaffoldin or enzyme-linked clusters on the genome. The recently described three-dimensional crystal structure of the cohesin-dockerin heterodimer sheds light on the critical amino acids that contribute to this high-affinity protein-protein interaction. In addition, new information regarding the regulation of cellulosome-related genes, budding genetic tools, and emerging genomics of cellulosome-producing bacteria promises new insight into the assembly and consequences of the multienzyme complex.

Opportunities to improve fiber degradation in the rumen: microbiology, ecology, and genomics

The degradation of plant cell walls by ruminants is of major economic importance in the developed as well as developing world. Rumen fermentation is unique in that efficient plant cell wall degradation relies on the cooperation between microorganisms that produce fibrolytic enzymes and the host animal that provides an anaerobic fermentation chamber. Increasing the efficiency with which the rumen microbiota degrades fiber has been the subject of extensive research for at least the last 100 years. Fiber digestion in the rumen is not optimal, as is supported by the fact that fiber recovered from feces is fermentable. This view is confirmed by the knowledge that mechanical and chemical pretreatments improve fiber degradation, as well as more recent research, which has demonstrated increased fiber digestion by rumen microorganisms when plant lignin composition is modified by genetic manipulation. Rumen microbiologists have sought to improve fiber digestion by genetic and ecological manipulation of rumen fermentation. This has been difficult and a number of constraints have limited progress, including: (a) a lack of reliable transformation systems for major fibrolytic rumen bacteria, (b) a poor understanding of ecological factors that govern persistence of fibrolytic bacteria and fungi in the rumen, (c) a poor understanding of which glycolyl hydrolases need to be manipulated, and (d) a lack of knowledge of the functional genomic framework within which fiber degradation operates. In this review the major fibrolytic organisms are briefly discussed. A more extensive discussion of the enzymes involved in fiber degradation is included. We also discuss the use of plant genetic manipulation, application of free-living lignolytic fungi and the use of exogenous enzymes. Lastly, we will discuss how newer technologies such as genomic and metagenomic approaches can be used to improve our knowledge of the functional genomic framework of plant cell wall degradation in the rumen.

Cellulosome assembly revealed by the crystal structure of the cohesin-dockerin complex

The utilization of organized supramolecular assemblies to exploit the synergistic interactions afforded by close proximity, both for enzymatic synthesis and for the degradation of recalcitrant substrates, is an emerging theme in cellular biology. Anaerobic bacteria harness a multiprotein complex, termed the "cellulosome," for efficient degradation of the plant cell wall. This megadalton catalytic machine organizes an enzymatic consortium on a multifaceted molecular scaffold whose "cohesin" domains interact with corresponding "dockerin" domains of the enzymes. Here we report the structure of the cohesin-dockerin complex from Clostridium thermocellum at 2.2-A resolution. The data show that the beta-sheet cohesin domain interacts predominantly with one of the helices of the dockerin. Whereas the structure of the cohesin remains essentially unchanged, the loop-helix-helix-loop-helix motif of the dockerin undergoes conformational change and ordering compared with its solution structure, although the classical 12-residue EF-hand coordination to two calcium ions is maintained. Significantly, internal sequence duplication within the dockerin is manifested in near-perfect internal twofold symmetry, suggesting that both "halves" of the dockerin may interact with cohesins in a similar manner, thus providing a higher level of structure to the cellulosome and possibly explaining the presence of "polycellulosomes." The structure provides an explanation for the lack of cross-species recognition between cohesin-dockerin pairs and thus provides a blueprint for the rational design, construction, and exploitation of these catalytic assemblies.

Transcriptional regulation of biomass-degrading enzymes in the filamentous fungus Trichoderma reesei

The filamentous fungus Trichoderma reesei produces and secretes profuse quantities of enzymes that act synergistically to degrade cellulase and related biomass components. We partially sequenced over 5100 random T. reesei cDNA clones. Among the sequences whose predicted gene products had significant similarity to known proteins, 12 were identified that encode previously unknown enzymes that likely function in biomass degradation. Microarrays were used to query the expression levels of each of the sequences under different conditions known to induce cellulolytic enzyme synthesis. Most of the genes encoding known and putative biomass-degrading enzymes were transcriptionally co-regulated. Moreover, despite the fact that several of these enzymes are not thought to degrade cellulase directly, they were coordinately overexpressed in a cellulase overproducing strain. A variety of additional sequences whose function could not be ascribed using the limited sequence available displayed analogous behavior and may also play a role in biomass degradation or in the synthesis of biomass-degrading enzymes. Sequences exhibiting additional regulatory patterns were observed that might reflect roles in regulation of cellulase biosynthesis. However, genes whose products are involved in protein processing and secretion were not highly regulated during cellulase induction.

The cellulosome system of Acetivibrio cellulolyticus includes a novel type of adaptor protein and a cell surface anchoring protein

A scaffoldin gene cluster was identified in the mesophilic cellulolytic anaerobe Acetivibrio cellulolyticus. The previously described scaffoldin gene, cipV, encodes an N-terminal family 9 glycoside hydrolase, a family 3b cellulose-binding domain, seven cohesin domains, and a C-terminal dockerin. The gene immediately downstream of cipV was sequenced and designated scaB. The protein encoded by this gene has 942 amino acid residues and a calculated molecular weight of 100,358 and includes an N-terminal signal peptide, four type II cohesions, and a C-terminal dockerin. ScaB cohesins 1 and 2 are very closely linked. Similar, but not identical, 39-residue Thr-rich linker segments separate cohesin 2 from cohesin 3 and cohesin 3 from cohesin 4, and an 84-residue Thr-rich linker connects the fourth cohesin to a C-terminal dockerin. The scaC gene downstream of scaB codes for a 1,237-residue polypeptide that includes a signal peptide, three cohesins, and a C-terminal S-layer homology (SLH) module. A long, ca. 550-residue linker separates the third cohesin and the SLH module of ScaC and is characterized by an 18-residue Pro-Thr-Ala-Ser-rich segment that is repeated 27 times. The calculated molecular weight of the mature ScaC polypeptide (excluding the signal peptide) is 124,162. The presence of the cohesins and the conserved SLH module implies that ScaC acts as an anchoring protein. The ScaC cohesins are on a separate branch of the phylogenetic tree that is close to, but distinct from, the type I cohesins. Affinity blotting with representative recombinant probes revealed the following specific intermodular interactions: (i) an expressed CipV cohesin binds selectively to an enzyme-borne dockerin, (ii) a representative ScaB cohesin binds to the CipV band of the cell-free supernatant fraction, and (iii) a ScaC cohesin binds to the ScaB dockerin. The experimental evidence thus indicates that CipV acts as a primary (enzyme-recognizing) scaffoldin, and the protein was also designated ScaA. In addition, ScaB is thought to assume the role of an adaptor protein, which connects the primary scaffoldin (ScaA) to the cohesin-containing anchoring scaffoldin (ScaC). The cellulosome system of A. cellulolyticus thus appears to exhibit a special type of organization that reflects the function of the ScaB adaptor protein. The intercalation of three multiple cohesin-containing scaffoldins results in marked amplification of the number of enzyme subunits per cellulosome unit. At least 96 enzymes can apparently be incorporated into an individual A. cellulolyticus cellulosome. The role of such amplified enzyme incorporation and the resultant proximity of the enzymes within the cellulosome complex presumably contribute to the enhanced synergistic action and overall efficient digestion of recalcitrant forms of cellulose. Comparison of the emerging organization of the A. cellulolyticus cellulosome with the organizations in other cellulolytic bacteria revealed the diversity of the supramolecular architecture.

Oligomerization, membrane anchoring, and cellulose-binding characteristics of AbpS, a receptor-like Streptomyces protein

Streptomyces reticuli produces a 34.6-kDa surface-anchored protein (AbpS) whose surface-exposed N terminus binds strongly to Avicel, a dominantly crystalline type of cellulose. The generation of a large set of mutated abpS-genes and the subsequent analysis of the corresponding proteins in vitro as well as in vivo in a Streptomyces host allow the assignment of the following characteristics for AbpS. (i) Amino acid residues participating directly in the cellulose-interaction are located at the N terminus. (ii) As ascertained by cross-linking experiments, AbpS forms homotetramers in its soluble as well as cellulose-bound form. (iii) The intermolecular assembly of four AbpS molecules is governed by two domains (including amino acids 60-110 and 161-212). Both domains possess large portions of alpha-helical regions in which hydrophobic amino acids are located on one side as known from coiled-coil proteins. (iv) The C-terminal part of AbpS comprising 35 amino acids contains a transmembrane domain. Due to the surface-exposed N terminus of AbpS and the presence of transmembrane helix the C terminus has to be situated in the cytoplasm of the S. reticuli hyphae. Thus AbpS connects the interior of the mycelia with the extracellular space and binds cellulose using a unique cellulose-binding module.

Cel6A, a major exoglucanase from the cellulosome of the anaerobic fungi Piromyces sp. E2 and Piromyces equi

Anaerobic fungi possess high cellulolytic activities, which are organised in high molecular mass (HMM) complexes. Besides catalytic modules, the cellulolytic enzyme components of these complexes contain non-catalytic modules, known as dockerins, that play a key role in complex assembly. Screening of a genomic and a cDNA library of two Piromyces species resulted in the isolation of two clones containing inserts of 5.5 kb (Piromyces sp. E2) and 1.5 kb (Piromyces equi). Both clones contained the complete coding region of a glycoside hydrolase (GH) from family 6, consisting of a 20 amino acid signal peptide, a 76 (sp. E2)/81 (P. equi) amino acid stretch comprising two fungal non-catalytic docking domains (NCDDs), a 24 (sp. E2)/16 (P. equi) amino acid linker, and a 369 amino acid catalytic module. Homology modelling of the catalytic module strongly suggests that the Piromyces enzymes will be processive cellobiohydrolases. The catalytic residues and all nearby residues are conserved. The reaction is thus expected to proceed via a classical single-displacement (inverting) mechanism that is characteristic of this family of GHs. The enzyme, defined as Cel6A, encoded by the full-length Piromyces E2 sequence was expressed in Escherichia coli. The recombinant protein expressed had a molecular mass of 55 kDa and showed activity against Avicel, supporting the observed relationship of the sequence to those of known cellobiohydrolases. Affinity-purified cellulosomes of Piromyces sp. E2 were analysed by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) and sodium dodecyl sulfate-polyacrylamide gel (SDS-PAGE) electrophoresis. A major band was detected with the molecular weight of Cel6A. A tryptic fingerprint of this protein confirmed its identity.

Crystal structure of a family 45 endoglucanase from Melanocarpus albomyces: mechanistic implications based on the free and cellobiose-bound forms

Cellulose, a polysaccharide of beta-1,4-linked D-glucosyl units, is the major component of plant cell walls and one of the most abundant biopolymers in nature. Cellulases (cellobiohydrolases and endoglucanases) are enzymes that catalyse the hydrolysis of cellulose to smaller oligosaccharides, a process of paramount importance in biotechnology. The thermophilic fungus Melanocarpus albomyces produces a 20 kDa endoglucanase known as 20K-cellulase that has been found particularly useful in the textile industry. The crystal structures of free 20K-cellulase and its complex with cellobiose have been determined at 2.0 A resolution. The enzyme, classified into the glycoside hydrolase family 45, exhibits the characteristic six-stranded beta-barrel found before in Humicola insolens endoglucanase V structure. However, the active site in the 20K-cellulase shows a closing of approximately 2.5-3.5A while a mobile loop identified previously in Humicola insolens endoglucanase V and implicated in the catalytic mechanism is well-defined in 20K-cellulase. In addition, the crystal structure of the cellobiose complex shows a shift in the cellobiose position at the substrate-binding cleft. It is therefore proposed that these alterations may reflect differences in the binding mechanism and catalytic action of the enzyme.

Regulation of the cellulosomal CelS (cel48A) gene of Clostridium thermocellum is growth rate dependent

Clostridium thermocellum produces an extracellular multienzyme complex, termed cellulosome, that allows efficient solubilization of crystalline cellulose. One of the major enzymes in this complex is the CelS (Cel48A) exoglucanase. The regulation of CelS at the protein and transcriptional levels was studied using batch and continuous cultures. The results of sodium dodecyl sulfate-polyacrylamide gel electrophoresis and Western blot analyses indicated that the amount of CelS in the supernatant fluids of cellobiose-grown cultures is lower than that of cellulose-grown cultures. The transcriptional level of celS mRNA was determined quantitatively by RNase protection assays with batch and continuous cultures under carbon and nitrogen limitation. The amount of celS mRNA transcripts per cell was about 180 for cells grown under carbon limitation at growth rates of 0.04 to 0.21 h(-1) and 80 and 30 transcripts per cell for batch cultures at growth rates of 0.23 and 0.35 h(-1), respectively. Under nitrogen limitation, the corresponding levels were 110, 40, and 30 transcripts/cell for growth rates of 0.07, 0.11, and 0.14 h(-1), respectively. Two major transcriptional start sites were detected at positions -140 and -145 bp, upstream of the translational start site of the celS gene. The potential promoters exhibited homology to known sigma factors (i.e., sigma(A) and sigma(B)) of Bacillus subtilis. The relative activity of the two promoters remained constant under the conditions studied and was in agreement with the results of the RNase protection assay, in which the observed transcriptional activity was inversely proportional to the growth rate.

beta-Glucosidase in cellulosome of the anaerobic fungus Piromyces sp. strain E2 is a family 3 glycoside hydrolase

The cellulosomes of anaerobic fungi convert crystalline cellulose solely into glucose, in contrast with bacterial cellulosomes which produce cellobiose. Previously, a beta-glucosidase was identified in the cellulosome of Piromyces sp. strain E2 by zymogram analysis, which represented approx. 25% of the extracellular beta-glucosidase activity. To identify the component in the fungal cellulosome responsible for the beta-glucosidase activity, immunoscreening with anti-cellulosome antibodies was used to isolate the corresponding gene. A 2737 bp immunoclone was isolated from a cDNA library. The clone encoded an extracellular protein containing a eukaryotic family 3 glycoside hydrolase domain homologue and was therefore named cel3A. The C-terminal end of the encoded Cel3A protein consisted of an auxiliary domain and three fungal dockerins, typical for cellulosome components. The Cel3A catalytic domain was expressed in Escherichia coli BL21 and purified. Biochemical analyses of the recombinant protein showed that the Cel3A catalytic domain was specific for beta-glucosidic bonds and functioned as an exoglucohydrolase on soluble substrates as well as cellulose. Comparison of the apparent K (m) and K (i) values of heterologous Cel3A and the fungal cellulosome for p -nitrophenyl-beta-D-glucopyranoside and D-glucono-1,5-delta-lactone respectively indicated that cel3A encodes the beta-glucosidase activity of the Piromyces sp. strain E2 cellulosome.

Degradation of cellulose substrates by cellulosome chimeras. Substrate targeting versus proximity of enzyme components

A library of 75 different chimeric cellulosomes was constructed as an extension of our previously described approach for the production of model functional complexes (Fierobe, H.-P., Mechaly, A., Tardif, C., Bélaich, A., Lamed, R., Shoham, Y., Bélaich, J.-P., and Bayer, E. A. (2001) J. Biol. Chem. 276, 21257-21261), based on the high affinity species-specific cohesin-dockerin interaction. Each complex contained three protein components: (i) a chimeric scaffoldin possessing an optional cellulose-binding module and two cohesins of divergent specificity, and (ii) two cellulases, each bearing a dockerin complementary to one of the divergent cohesins. The activities of the resultant ternary complexes were assayed using different types of cellulose substrates. Organization of cellulolytic enzymes into cellulosome chimeras resulted in characteristically high activities on recalcitrant substrates, whereas the cellulosome chimeras showed little or no advantage over free enzyme systems on tractable substrates. On recalcitrant cellulose, the presence of a cellulose-binding domain on the scaffoldin and enzyme proximity on the resultant complex contributed almost equally to their elevated action on the substrate. For certain enzyme pairs, however, one effect appeared to predominate over the other. The results also indicate that substrate recalcitrance is not necessarily a function of its crystallinity but reflects the overall accessibility of reactive sites.

Characterization of the cellulolytic complex (cellulosome) of Clostridium acetobutylicum

A large cellulosomal gene cluster was identified in the recently sequenced genome of Clostridium acetobutylicum ATCC 824. Sequence analysis revealed that this cluster contains the genes for the scaffolding protein CipA, the processive endocellulase Cel48A, several endoglucanases of families 5 and 9, the mannanase Man5G, and a hydrophobic protein, OrfXp. Surprisingly, genetic organization of this large cluster is very similar to that of Clostridium cellulolyticum, the model of mesophilic clostridial cellulosomes. As C. acetobutylicum is unable to grow on cellulosic substrates, the existence of a cellulosomal gene cluster in the genome raises questions about its expression, function and evolution. Biochemical evidence for the expression of a cellulosomal protein complex was investigated. The results of sodium dodecyl sulfate-polyacrylamide gel electrophoresis, N-terminal sequencing and Western blotting with antibodies against specific components of the C. cellulolyticum cellulosome suggest that at least four major cellulosomal proteins are present. In addition, despite the fact that no cellulolytic activities were detected, we report here the evidence for the production of a high molecular mass cellulosomal complex in C. acetobutylicum.

Cellulose-binding domains

Many researchers have acknowledged the fact that there exists an immense potential for the application of the cellulose-binding domains (CBDs) in the field of biotechnology. This becomes apparent when the phrase "cellulose-binding domain" is used as the key word for a computerized patent search; more then 150 hits are retrieved. Cellulose is an ideal matrix for large-scale affinity purification procedures. This chemically inert matrix has excellent physical properties as well as low affinity for nonspecific protein binding. It is available in a diverse range of forms and sizes, is pharmaceutically safe, and relatively inexpensive. Present studies into the application of CBDs in industry have established that they can be applied in the modification of physical and chemical properties of composite materials and the development of modified materials with improved properties. In agro-biotechnology, CBDs can be used to modify polysaccharide materials both in vivo and in vitro. The CBDs exert nonhydrolytic fiber disruption on cellulose-containing materials. The potential applications of "CBD technology" range from modulating the architecture of individual cells to the modification of an entire organism. Expressing these genes under specific promoters and using appropriate trafficking signals, can be used to alter the nutritional value and texture of agricultural crops and their final products.

Microbial cellulose utilization: fundamentals and biotechnology

Fundamental features of microbial cellulose utilization are examined at successively higher levels of aggregation encompassing the structure and composition of cellulosic biomass, taxonomic diversity, cellulase enzyme systems, molecular biology of cellulase enzymes, physiology of cellulolytic microorganisms, ecological aspects of cellulase-degrading communities, and rate-limiting factors in nature. The methodological basis for studying microbial cellulose utilization is considered relative to quantification of cells and enzymes in the presence of solid substrates as well as apparatus and analysis for cellulose-grown continuous cultures. Quantitative description of cellulose hydrolysis is addressed with respect to adsorption of cellulase enzymes, rates of enzymatic hydrolysis, bioenergetics of microbial cellulose utilization, kinetics of microbial cellulose utilization, and contrasting features compared to soluble substrate kinetics. A biological perspective on processing cellulosic biomass is presented, including features of pretreated substrates and alternative process configurations. Organism development is considered for "consolidated bioprocessing" (CBP), in which the production of cellulolytic enzymes, hydrolysis of biomass, and fermentation of resulting sugars to desired products occur in one step. Two organism development strategies for CBP are examined: (i) improve product yield and tolerance in microorganisms able to utilize cellulose, or (ii) express a heterologous system for cellulose hydrolysis and utilization in microorganisms that exhibit high product yield and tolerance. A concluding discussion identifies unresolved issues pertaining to microbial cellulose utilization, suggests approaches by which such issues might be resolved, and contrasts a microbially oriented cellulose hydrolysis paradigm to the more conventional enzymatically oriented paradigm in both fundamental and applied contexts.

An intron-containing glycoside hydrolase family 9 cellulase gene encodes the dominant 90 kDa component of the cellulosome of the anaerobic fungus Piromyces sp. strain E2

The cellulosome produced by Piromyces sp. strain E2 during growth on filter paper was purified by using an optimized cellulose-affinity method consisting of steps of EDTA washing of the cellulose-bound protein followed by elution with water. Three dominant proteins were identified in the cellulosome preparation, with molecular masses of 55, 80 and 90 kDa. Treatment of cellulose-bound cellulosome with a number of denaturing agents was also tested. Incubation with 0.5% (w/v) SDS or 8 M urea released most cellulosomal proteins, while leaving the greater fraction of the 80, 90 and 170 kDa components. To investigate the major 90 kDa cellulosome protein further, the corresponding gene, cel9A, was isolated, using immunoscreening and N-terminal sequencing. Inspection of the cel9A genomic organization revealed the presence of four introns, allowing the construction of a consensus for introns in anaerobic fungi. The 2800 bp cDNA clone contained an open reading frame of 2334 bp encoding a 757-residue extracellular protein. Cel9A includes a 445-residue glycoside hydrolase family 9 catalytic domain, and so is the first fungal representative of this large family. Both modelling of the catalytic domain as well as the activity measured with low level expression in Escherichia coli indicated that Cel9A is an endoglucanase. The catalytic domain is succeeded by a putative beta-sheet module of 160 amino acids with unknown function, followed by a threonine-rich linker and three fungal docking domains. Homology modelling of the Cel9A dockerins suggested that the cysteine residues present are all involved in disulphide bridges. The results presented here are used to discuss evolution of glycoside hydrolase family 9 enzymes.

Modification of polysaccharides and plant cell wall by endo-1,4-beta-glucanase and cellulose-binding domains

Cellulose is one of the most abundant polymers in nature. Different living systems evolved simultaneously, using structurally similar proteins to synthesize and metabolize polysaccharides. In the growing plant, cell wall loosening, together with cellulose biosynthesis, enables turgor-driven cell expansion. It has been postulated that endo-1,4-beta-glucanases (EGases) play a central role in these complex activities. Similarly, microorganisms use a consortium of lytic enzymes to convert cellulose into soluble sugars. Most, if not all, cellulases have a modular structure with two or more separate independent functional domains. Binding to cellulose is mediated by a cellulose-binding domain (CBD), whereas the catalytic domain mediates hydrolysis. Today, EGases and CBDs are known to exist in a wide range of species and it is evident that both possess immense potential in modifying polysaccharide materials in-vivo and in-vitro. The hydrolytic function is utilized for polysaccharide degradation in microbial systems and cell wall biogenesis in plants. The CBDs exerts activity that can be utilized for effective degradation of crystalline cellulose, plant cell wall relaxation, expansion and cell wall biosynthesis. Applications range from modulating the architecture of individual cells to an entire organism. These genes, when expressed under specific promoters and appropriate trafficking signals can be used to alter the nutritional value and texture of agricultural crop and their final products. EGases and CBDs may also find applications in the modification of physical and chemical properties of composite materials to create new materials possessing improved properties.

Adhesion to cellulose of the Gram-positive bacterium Ruminococcus albus involves type IV pili

This study was aimed at characterizing a cell-surface 25 kDa glycoprotein (GP25) that was previously shown to be underproduced by a spontaneous adhesion-defective mutant D5 of Ruminococcus albus 20. An antiserum against wild-type strain 20 was adsorbed with the mutant D5 to enrich it in antibodies 'specific' to adhesion structures of R. albus 20. The resulting antiserum, called anti-Adh serum, blocked adhesion of R. albus 20 and reacted mainly with GP25 in bacterial and extracellular protein fractions of R. albus 20. The N-terminal sequence of purified GP25 was identical to that of CbpC, a 21 kDa cellulose-binding protein (CBP) of R. albus 8. The nucleotide sequence of the gp25 gene was determined by PCR and genomic walking procedures. The gp25 gene encoded a protein of 165 aa with a calculated molecular mass of 16940 Da that showed 72.9% identity with CbpC and presented homologies with type IV pilins of Gram-negative pathogenic bacteria. Negative-staining electron microscopy revealed fine and flexible pili surrounding R. albus 20 cells while mutant cells were not piliated. In addition, immunoelectron microscopy showed that the anti-Adh serum probing mainly GP25, completely decorated the pili surrounding R. albus 20, thereby showing that GP25 was a major pilus subunit. This study shows for the first time the presence of pili at the surface of R. albus and identifies GP25 as their major protein subunit. Though GP25 was not identified as a CBP, isolated pili were shown to bind cellulose. In conclusion, these pili, which belong to the family of type IV pili, mediate adhesion of R. albus 20 to cellulose.

A newly described cellulosomal cellobiohydrolase, CelO, from Clostridium thermocellum: investigation of the exo-mode of hydrolysis, and binding capacity to crystalline cellulose

The sequence of the celO gene from Clostridium thermocellum F7 was determined. The gene product, cellulase CelO (Ct-Cel5F), had a modular structure consisting of a carbohydrate-binding module of the CBM3 family and a catalytic domain of the glycosyl hydrolase family 5. The presence of the dockerin module indicated that the enzyme was a component of the cellulosome complex. The thermostable recombinant gene product was active on cellodextrins, barley beta-glucan, carboxymethylcellulose and insoluble cellulose. Cellobiose was the only product released from amorphic and crystalline cellulose, cellotetraose and higher cello-oligosaccharides, identifying CelO as a cellobiohydrolase. The cleavage pattern of p-nitrophenyl beta-D-cellotetraoside, blockage of the hydrolysis of NaBH(4)-reduced cellopentaose and the reduction in substrate viscosity suggested activity from the reducing end in a processive mode after making random cuts. Binding to insoluble, i.e. amorphous, and crystalline cellulose was mediated by the carbohydrate-binding module CBM3b, with a preference for the crystalline substrate.

The structure of the feruloyl esterase module of xylanase 10B from Clostridium thermocellum provides insights into substrate recognition

BACKGROUND

Degradation of the plant cell wall requires the synergistic action of a consortium of predominantly modular enzymes. In Clostridiae, these biocatalysts are organized into a supramolecular assembly termed a "cellulosome." This multienzyme complex possesses, in addition to its well-described cellulolytic activity, an apparatus specific for xylan degradation. Cinnamic acid esterases hydrolyze the ferulate groups involved in the crosslinking of arabinoxylans to lignin and thus play a key role in the degradation of the plant cell wall in addition to having promising industrial and medical applications.

RESULTS

We have cloned and overexpressed the feruloyl esterase module from a 5 domain xylanase, Xyn10B from Clostridium thermocellum. The native structure at 1.6 A resolution has been solved with selenomethionine multiple wavelength anomalous dispersion and refined to a final R(free) of 17.8%. The structure of a hydrolytically inactive mutant, S954A, in complex with the reaction product ferulic acid has been refined at a resolution of 1.4 A with an R(free) of 16.0%.

CONCLUSIONS

The C. thermocellum Xyn10B ferulic acid esterase displays the alpha/beta-hydrolase fold and possesses a classical Ser-His-Asp catalytic triad. Ferulate esterases are characterized by their specificity, and the active center reveals the binding site for ferulic acid and related compounds. Ferulate binds in a small surface depression that possesses specificity determinants for both the methoxy and hydroxyl ring substituents of the substrate. There appears to be a lack of specificity for the xylan backbone, which may reflect the intrinsic chemical heterogeneity of the natural substrate.

Biochemical analysis of interactions between outer membrane proteins that contribute to starch utilization by Bacteroides thetaiotaomicron

An early step in the utilization of starch by Bacteroides thetaiotaomicron is the binding of starch to the bacterial surface. Four starch-associated outer membrane proteins of B. thetaiotaomicron that have no starch-degrading activity have been identified. Two of these, SusC and SusD, have been shown by genetic analysis to be required for starch binding. In this study, we provide the first biochemical evidence that these two proteins interact physically with each other. Both formaldehyde cross-linking and nondenaturing gel electrophoresis experiments showed that SusC and SusD interact to form a complex. Two other proteins encoded by genes in the same operon, SusE and SusF, proved not to be essential for starch utilization and actually decreased starch binding when they were present along with SusC and SusD. Consistent with this, nondenaturing gel analysis revealed that in a strain producing SusC, SusD, and SusE, the SusCD complex was partially destabilized. The strain producing SusC, SusD, and SusE also grew more slowly on starch than a strain producing SusC, SusD, SusE, and SusF (mu(max), 0.29 and 0.37/h, respectively). Thus, SusE appears to interact with the SusCD complex. SusE also interacts with SusF, because SusE was less susceptible to proteinase K digestion when SusF was present, and nondenaturing gel analysis detected a complex formed by these two proteins. Our results indicate that SusC, SusD, SusE, and SusF form a protein complex in the outer membrane but that SusE and SusF are dispensable members of this complex.

A novel carbohydrate-binding protein is a component of the plant cell wall-degrading complex of Piromyces equi

The recycling of photosynthetically fixed carbon by the action of microbial plant cell wall hydrolases is a fundamental biological process that is integral to one of the major geochemical cycles and, in addition, has considerable industrial potential. Enzyme systems that attack the plant cell wall contain noncatalytic carbohydrate-binding modules (CBMs) that mediate attachment to this composite structure and play a pivotal role in maximizing the hydrolytic process. Anaerobic fungi that colonize herbivores are the most efficient plant cell wall degraders known, and this activity is vested in a high molecular weight complex that binds tightly to the plant cell wall. To investigate whether plant cell wall attachment is mediated by noncatalytic proteins, a cDNA library of the anaerobic fungus Piromyces equi was screened for sequences that encode noncatalytic proteins that are components of the cellulase-hemicellulase complex. A 1.6-kilobase cDNA was isolated encoding a protein of 479 amino acids with a M(r) of 52548 designated NCP1. The mature protein had a modular architecture comprising three copies of the noncatalytic dockerin module that targets anaerobic fungal proteins to the cellulase-hemicellulase complex. The two C-terminal modules of NCP1, CBM29-1 and CBM29-2, respectively, exhibit 33% sequence identity with each other but have no homologues in protein data bases. A truncated form of NCP1 comprising CBM29-1 and CBM29-2 (CBM29-1-2) and each of the two individual copies of CBM29 bind primarily to mannan, cellulose, and glucomannan, displaying the highest affinity for the latter polysaccharide. CBM29-1-2 exhibits 4-45-fold higher affinity than either CBM29-1 or CBM29-2 for the various ligands, indicating that the two modules, when covalently linked, act in synergy to bind to an array of different polysaccharides. This paper provides the first report of a CBM-containing protein from an anaerobic fungal cellulase-hemicellulase complex. The two CBMs constitute a novel CBM family designated CBM29 whose members exhibit unusually wide ligand specificity. We propose, therefore, that NCP1 plays a role in sequestering the fungal enzyme complex onto the plant cell wall.

Kinetics and metabolism of cellulose degradation at high substrate concentrations in steady-state continuous cultures of Clostridium cellulolyticum on a chemically defined medium

The hydrolysis and fermentation of insoluble cellulose were investigated using continuous cultures of Clostridium cellulolyticum with increasing amounts of carbon substrate. At a dilution rate (D) of 0.048 h(-1), biomass formation increased proportionately to the cellulose concentration provided by the feed reservoir, but at and above 7.6 g of cellulose x liter(-1) the cell density at steady state leveled off. The percentage of cellulose degradation declined from 32.3 to 8.3 with 1.9 and 27.0 g of cellulose x liter(-1), respectively, while cellodextrin accumulation rose and represented up to 4.0% of the original carbon consumed. The shift from cellulose-limited to cellulose-sufficient conditions was accompanied by an increase of both the acetate/ethanol ratio and lactate biosynthesis. A kinetics study of C. cellulolyticum metabolism in cellulose saturation was performed by varying D with 18.1 g of cellulose x liter(-1). Compared to cellulose limitation (M. Desvaux, E. Guedon, and H. Petitdemange, J. Bacteriol. 183:119-130, 2001), in cellulose-sufficient continuous culture (i) the ATP/ADP, NADH/NAD+, and q(NADH produced)/q(NADH used) ratios were higher and were related to a more active catabolism, (ii) the acetate/ethanol ratio increased while the lactate production decreased as D rose, and (iii) the maximum growth yield (Y(max)X/S) (40.6 g of biomass per mol of hexose equivalent) and the maximum energetic yield (Y(max)ATP) (19.4 g of biomass per mol of ATP) were lowered. C. cellulolyticum was then able to regulate and optimize carbon metabolism under cellulose-saturated conditions. However, the facts that some catabolized hexose and hence ATP were no longer associated with biomass production with a cellulose excess and that concomitantly lactate production and pyruvate leakage rose suggest the accumulation of an intracellular inhibitory compound(s), which could further explain the establishment of steady-state continuous cultures under conditions of excesses of all nutrients. The following differences were found between growth on cellulose in this study and growth under cellobiose-sufficient conditions (E. Guedon, S. Payot, M. Desvaux, and H. Petitdemange, Biotechnol. Bioeng. 67:327-335, 2000): (i) while with cellobiose, a carbon flow into the cell of as high as 5.14 mmol of hexose equivalent g of cells(-1) x h(-1) could be reached, the maximum entering carbon flow obtained here on cellulose was 2.91 mmol of hexose equivalent g of cells(-1) x h(-1); (ii) while the NADH/NAD+ ratio could reach 1.51 on cellobiose, it was always lower than 1 on cellulose; and (iii) while a high proportion of cellobiose was directed towards exopolysaccharide, extracellular protein, and free amino acid excretions, these overflows were more limited under cellulose-excess conditions. Such differences were related to the carbon consumption rate, which was higher on cellobiose than on cellulose.

Lentinula edodes produces a multicomponent protein complex containing manganese (II)-dependent peroxidase, laccase and beta-glucosidase

A multicomponent protein complex containing manganese (II)-dependent peroxidase, laccase and beta-glucosidase was isolated from culture extracts of the white rot basidiomycete Lentinula edodes. This protein complex showed a single protein band on native polyacrylamide gel electrophoresis (PAGE). On sodium dodecyl sulfate (SDS)-PAGE, however, it displayed three major bands and several additional minor bands ranging in size from 60 kDa to 180 kDa, suggesting it being a complex of six to eight different proteins. The molecular mass of this complex was estimated to be approximately 660 kDa from the elution position of gel filtration. This enzyme complex was effective in transforming environmentally persistent xenobiotics, pentachlorophenol and 2,5-dichlorophenol.

Identification of novel beta-mannan- and beta-glucan-binding modules: evidence for a superfamily of carbohydrate-binding modules

Many glycoside hydrolases, which degrade long-chain carbohydrate polymers, possess distinct catalytic modules and non-catalytic carbohydrate-binding modules (CBMs). On the basis of conserved protein secondary structure, we describe here the identification and experimental characterization of novel type of mannanase-associated mannan-binding module and also characterization of two CBM family 4 laminarinase-associated beta-glucan-binding modules. These modules are predicted to belong to a superfamily of CBMs which include families 4, 16, 17, 22 and a proposed new family, family 27.

Design and production of active cellulosome chimeras. Selective incorporation of dockerin-containing enzymes into defined functional complexes

Defined chimeric cellulosomes were produced in which selected enzymes were incorporated in specific locations within a multicomponent complex. The molecular building blocks of this approach are based on complementary protein modules from the cellulosomes of two clostridia, Clostridium thermocellum and Clostridium cellulolyticum, wherein cellulolytic enzymes are incorporated into the complexes by means of high-affinity species-specific cohesin-dockerin interactions. To construct the desired complexes, a series of chimeric scaffoldins was prepared by recombinant means. The scaffoldin chimeras were designed to include two cohesin modules from the different species, optionally connected to a cellulose-binding domain. The two divergent cohesins exhibited distinct specificities such that each recognized selectively and bound strongly to its dockerin counterpart. Using this strategy, appropriate dockerin-containing enzymes could be assembled precisely and by design into a desired complex. Compared with the mixture of free cellulases, the resultant cellulosome chimeras exhibited enhanced synergistic action on crystalline cellulose.

Metabolic flux in cellulose batch and cellulose-fed continuous cultures of Clostridium cellulolyticum in response to acidic environment

Clostridium cellulolyticum, a nonruminal cellulolytic mesophilic bacterium, was grown in batch and continuous cultures on cellulose using a chemically defined medium. In batch culture with unregulated pH, less cellulose degradation and higher accumulation of soluble glucides were obtained compared to a culture with the pH controlled at 7.2. The gain in cellulose degradation achieved with pH control was offset by catabolite production rather than soluble sugar accumulation. The pH-controlled condition improved biomass, ethanol and acetate production, whereas maximum lactate and extracellular pyruvate concentrations were lower than in the non-pH-controlled condition. In a cellulose-fed chemostat at constant dilution rate and pH values ranging from 7.4 to 6.2, maximum cell density was obtained at pH 7.0. Environmental acidification chiefly influenced biomass formation, since at pH 6.4 the dry weight of cells was more than fourfold lower compared to that at pH 7.0, whereas the specific rate of cellulose assimilation decreased only from 11.74 to 10.13 milliequivalents of carbon (g cells)(-1) h(-1). The molar growth yield and the energetic growth yield did not decline as pH was lowered, and an abrupt transition to washout was observed. Decreasing the pH induced a shift from an acetate-ethanol fermentation to a lactate-ethanol fermentation. The acetate/ethanol ratio decreased as the pH declined, reaching close to 1 at pH 6.4. Whatever the pH conditions, lactate dehydrogenase was always greatly in excess. As pH decreased, both the biosynthesis and the catabolic efficiency of the pyruvate-ferredoxin oxidoreductase declined, as indicated by the ratio of the specific enzyme activity to the specific metabolic rate, which fell from 9.8 to 1.8. Thus a change of only 1 pH unit induced considerable metabolic change and ended by washout at around pH 6.2. C. cellulolyticum appeared to be similar to rumen cellulolytic bacteria in its sensitivity to acidic conditions. Apparently, the cellulolytic anaerobes studied thus far do not thrive when the pH drops below 6.0, suggesting that they evolved in environments where acid tolerance was not required for successful competition with other microbes.

Solution structure, backbone dynamics and chitin binding of the anti-fungal protein from Streptomyces tendae TÜ901 1 1Edited by M. F. Summers

AFP1 is a recently discovered anti-fungal, chitin-binding protein from Streptomyces tendae Tü901. Mature AFP1 comprises 86 residues and exhibits limited sequence similarity to the cellulose-binding domains of bacterial cellulases and xylanases. No similarity to the Cys and Gly-rich domains of plant chitin-binding proteins (e.g. agglutinins, lectins, hevein) is observed. AFP1 is the first chitin-binding protein from a bacterium for which anti-fungal activity was shown. Here, we report the three-dimensional solution structure of AFP1, determined by nuclear magnetic resonance spectroscopy. The protein contains two antiparallel beta-sheets (five and four beta-strands each), that pack against each other in a parallel beta-sandwich. This type of architecture is conserved in the functionally related family II of cellulose-binding domains, albeit with different connectivity. A similar fold is also observed in other unrelated proteins (spore coat protein from Myxococcus xanthus, beta-B2 and gamma-B crystallins from Bos taurus, canavalin from Jack bean). AFP1 is therefore classified as a new member of the betagamma-crystallin superfamily. The dynamics of the protein was characterized by NMR using amide 15N relaxation and solvent exchange data. We demonstrate that the protein exhibits an axially symmetric (oblate-like) rotational diffusion tensor whose principal axis coincides to within 15 degrees with that of the inertial tensor. After completion of the present structure of AFP1, an identical fold was reported for a Streptomyces killer toxin-like protein. Based on sequence comparisons and clustering of conserved residues on the protein surface for different cellulose and chitin-binding proteins, we postulate a putative sugar-binding site for AFP1. The inability of the protein to bind short chitin fragments suggests that certain particular architectural features of the solid chitin surface are crucial for the interaction.

Cohesin-dockerin interaction in cellulosome assembly: a single hydroxyl group of a dockerin domain distinguishes between nonrecognition and high affinity recognition

The assembly of enzyme components into the cellulosome complex is dictated by the cohesin-dockerin interaction. In a recent article (Mechaly, A., Yaron, S., Lamed, R., Fierobe, H.-P., Belaich, A., Belaich, J.-P., Shoham, Y., and Bayer, E. A. (2000) Proteins 39, 170-177), we provided experimental evidence that four previously predicted dockerin residues play a decisive role in the specificity of this high affinity interaction, although additional residues were also implicated. In the present communication, we examine further the contributing factors for the recognition of a dockerin by a cohesin domain between the respective cellulosomal systems of Clostridium thermocellum and Clostridium cellulolyticum. In this context, the four confirmed residues were analyzed for their individual effect on selectivity. In addition, other dockerin residues were discerned that could conceivably contribute to the interaction, and the suspected residues were similarly modified by site-directed mutagenesis. The results indicate that mutation of a single residue from threonine to leucine at a given position of the C. thermocellum dockerin differentiates between its nonrecognition and high affinity recognition (K(a) approximately 10(9) m(-1)) by a cohesin from C. cellulolyticum. This suggests that the presence or absence of a single decisive hydroxyl group is critical to the observed biorecognition. This study further implicates additional residues as secondary determinants in the specificity of interaction, because interconversion of selected residues reduced intraspecies self-recognition by at least three orders of magnitude. Nevertheless, as the latter mutageneses served to reduce but not annul the cohesin-dockerin interaction within this species, it follows that other subtle alterations play a comparatively minor role in the recognition between these two modules.

Cellulosomal scaffoldin-like proteins from Ruminococcus flavefaciens

Two tandem cellulosome-associated genes were identified in the cellulolytic rumen bacterium, Ruminococcus flavefaciens. The deduced gene products represent multimodular scaffoldin-related proteins (termed ScaA and ScaB), both of which include several copies of explicit cellulosome signature sequences. The scaB gene was completely sequenced, and its upstream neighbor scaA was partially sequenced. The sequenced portion of scaA contains repeating cohesin modules and a C-terminal dockerin domain. ScaB contains seven relatively divergent cohesin modules, two extremely long T-rich linkers, and a C-terminal domain of unknown function. Collectively, the cohesins of ScaA and ScaB are phylogenetically distinct from the previously described type I and type II cohesins, and we propose that they define a new group, which we designated here type III cohesins. Selected modules from both genes were overexpressed in Escherichia coli, and the recombinant proteins were used as probes in affinity-blotting experiments. The results strongly indicate that ScaA serves as a cellulosomal scaffoldin-like protein for several R. flavefaciens enzymes. The data are supported by the direct interaction of a recombinant ScaA cohesin with an expressed dockerin-containing enzyme construct from the same bacterium. The evidence also demonstrates that the ScaA dockerin binds to a specialized cohesin(s) on ScaB, suggesting that ScaB may act as an anchoring protein, linked either directly or indirectly to the bacterial cell surface. This study is the first direct demonstration in a cellulolytic rumen bacterium of a cellulosome system, mediated by distinctive cohesin-dockerin interactions.

The binding pattern of two carbohydrate-binding modules of laminarinase Lam16A from Thermotoga neapolitana: differences in beta-glucan binding within family CBM4

Carbohydrate-binding modules (CBMs) are often part of the complex hydrolytic extracellular enzymes from bacteria and may modulate their catalytic activity. The thermostable catalytic domain of laminarinase Lam16A from Thermotoga neapolitana (glycosyl hydrolase family 16) is flanked by two CBMs, 148 and 161 aa long. They share a sequence identity of 30%, are homologous to family CBM4 and are thus called CBM4-1 and CBM4-2 respectively. Recombinant Lam16A proteins deleted for one or both binding modules and the isolated module CBM4-1 were characterized. Proteins containing the N-terminal module CBM4-1 bound to the soluble polysaccharides laminarin (1,3-beta-glucan) and barley 1,3/1,4-beta-glucan, and proteins containing the C-terminal module CBM4-2 bound additionally to curdlan (1,3-beta-glucan) and pustulan (1,6-beta-glucan), and to insoluble yeast cell wall beta-glucan. The activity of the catalytic domain on soluble 1,3-beta-glucans was stimulated by the presence of CBM4-1, whereas the presence of CBM4-2 enhanced the Lam16A activity towards gelatinized and insoluble or mixed-linkage 1,3-beta-glucan. Thermostability of the catalytic domain was not affected by the truncations. Members of family CBM4 can be divided into four subfamilies, members of which show different polysaccharide-binding specificities corresponding to the catalytic specificities of the associated hydrolytic domains.

Carbon flux distribution and kinetics of cellulose fermentation in steady-state continuous cultures of Clostridium cellulolyticum on a chemically defined medium

The metabolic characteristics of Clostridium cellulolyticum, a mesophilic cellulolytic nonruminal bacterium, were investigated and characterized kinetically for the fermentation of cellulose by using chemostat culture analysis. Since with C. cellulolyticum (i) the ATP/ADP ratio is lower than 1, (ii) the production of lactate at low specific growth rate (mu) is low, and (iii) there is a decrease of the NADH/NAD(+) ratio and q(NADH produced)/ q(NADH used) ratio as the dilution rate (D) increases in carbon-limited conditions, the chemostats used were cellulose-limited continuously fed cultures. Under all conditions, ethanol and acetate were the main end products of catabolism. There was no shift from an acetate-ethanol fermentation to a lactate-ethanol fermentation as previously observed on cellobiose as mu increased (E. Guedon, S. Payot, M. Desvaux, and H. Petitdemange, J. Bacteriol. 181:3262-3269, 1999). The acetate/ethanol ratio was always higher than 1 but decreased with D. On cellulose, glucose 6-phosphate and glucose 1-phosphate are important branch points since the longer the soluble beta-glucan uptake is, the more glucose 1-phosphate will be generated. The proportion of carbon flowing toward phosphoglucomutase remained constant (around 59.0%), while the carbon surplus was dissipated through exopolysaccharide and glycogen synthesis. The percentage of carbon metabolized via pyruvate-ferredoxin oxidoreductase decreased with D. Acetyl coenzyme A was mainly directed toward the acetate formation pathway, which represented a minimum of 27.1% of the carbon substrate. Yet the proportion of carbon directed through biosynthesis (i.e., biomass, extracellular proteins, and free amino acids) and ethanol increased with D, reaching 27.3 and 16.8%, respectively, at 0.083 h(-1). Lactate and extracellular pyruvate remained low, representing up to 1.5 and 0.2%, respectively, of the original carbon uptake. The true growth yield obtained on cellulose was higher, [50.5 g of cells (mol of hexose eq)(-1)] than on cellobiose, a soluble cellodextrin [36.2 g of cells (mol of hexose eq)(-1)]. The rate of cellulose utilization depended on the solid retention time and was first order, with a rate constant of 0.05 h(-1). Compared to cellobiose, substrate hydrolysis by cellulosome when bacteria are grown on cellulose fibers introduces an extra means for regulation of the entering carbon flow. This led to a lower mu, and so metabolism was not as distorted as previously observed with a soluble substrate. From these results, C. cellulolyticum appeared well adapted and even restricted to a cellulolytic lifestyle.