Organic Phase Syntheses of Magnetic Nanoparticles and Their Applications

Magnetically Separable Nanocatalyst with the Fe3O4 Core and Polydopamine-Sandwiched Au Nanocrystal Shell

This work reports a novel Fe₃O₄@polydopamine/Au/polydopamine core/shell nanocomposite toward a magnetically separable nanocatalyst. Because the polydopamine (PDA) layer-sandwiched Au nanocrystals were prepared by a layer-by-layer method, the content of Au could be controlled by varying the Au shell number (such as burger-like Fe₃O₄@PDA/Au/PDA/Au/PDA). Fe₃O₄@PDA/Au/PDA exhibited excellent catalytic activity in reducing p-nitrophenol because the substrate could penetrate the PDA shell. Owing to the protection of the PDA shell, Fe₃O₄@PDA/Au/PDA presented higher cyclability than Fe₃O₄@PDA/Au. The activity of Fe₃O₄@PDA/Au/PDA maintained 95% after 7 cycles, while that of Fe₃O₄@PDA/Au was only 61%. The detailed cycling catalytic mechanism was investigated, and it was found that the catalytic rate of Fe₃O₄@PDA/Au/PDA/Au/PDA was faster than that of Fe₃O₄@PDA/Au/PDA because of the higher Au content. Interestingly, this method could be extended for other magnetic nanocomposites with two different kinds of noble metal nanocrystals integrated within one particle, such as Fe₃O₄@PDA/Au/PDA/Ag/PDA and Fe₃O₄@PDA/Au/PDA/Pd/PDA.

Unexpected compositional and structural modification of CoPt3 nanoparticles by extensive surface purification

We combined synchrotron small angle X-ray scattering, X-ray fluorescence and extended X-ray absorption fine structure spectroscopy to probe the structure of chemically synthesized CoPt3 nanoparticles (NPs) after ligand removal via the commonly accepted solvent/nonsolvent approach. We showed that the improved catalytic activity of extensively purified NPs could not be explained only in terms of a "cleaner" surface. We found that extensive surface purification results in the substantial leaching of the Co atoms from the chemically synthesized CoPt3 NPs transforming them into CoPt3/Pt core/shell structures with an unexpectedly thick (∼0.5 nm) Pt shell. We indicated that the improved catalytic activity of extensively purified NPs in octyne hydrogenation reaction can be explained by the formation of CoPt3/Pt core/shell structures. Also, we demonstrated that drastic compositional and structural transformation of water transferred CoPt3 NPs was rather a result of extensive removal of native ligands via a solvent/nonsolvent approach than leaching of cobalt atoms in aqueous media. We expect that these findings can be relevant to other transition metal based multicomponent NPs.

Cathodic Corrosion of a Bulk Wire to Nonaggregated Functional Nanocrystals and Nanoalloys

A key enabling step in leveraging the properties of nanoparticles (NPs) is to explore new, simple, controllable, and scalable nanotechnologies for their syntheses. Among "wet" methods, cathodic corrosion has been used to synthesize catalytic aggregates with some control over their size and preferential faceting. Here, we report on a modification of the cathodic corrosion method for producing a range of nonaggregated nanocrystals (Pt, Pd, Au, Ag, Cu, Rh, Ir, and Ni) and nanoalloys (Pt₅₀Au₅₀, Pd₅₀Au₅₀, and Ag _xAu_{100- x}) with potential for scaling up the production rate. The method employs poly(vinylpyrrolidone) (PVP) as a stabilizer in an electrolyte solution containing nonreducible cations (Na⁺, Ca²⁺), and cathodic corrosion of the corresponding wires takes place in the electrolyte under ultrasonication. The ultrasonication not only promotes particle-PVP interactions (enhancing NP dispersion and diluting locally high NP concentration) but also increases the production rate by a factor of ca. 5. Further increase in the production rate can be achieved through parallelization of electrodes to construct comb electrodes. With respect to applications, carbon-supported Pt NPs prepared by the new method exhibit catalytic activity and durability for methanol oxidation comparable or better than the commercial benchmark catalyst. A variety of Ag _xAu_{100- x} nanoalloys are characterized by ultraviolet-visible absorption spectroscopy and high-resolution transmission electron microscopy. The protocol for NP synthesis by cathodic corrosion should be a step toward its further use in academic research as well as in its practical upscaling.

Solventless mechanochemical preparation of novel magnetic bioconjugates

A solventless mechanochemical approach was employed to obtain a bioconjugate (BSA-DA-Fe₂O₃) based on bovine serum albumin (BSA) and dopamine (DA) coated iron oxide magnetic nanoparticles. UV-vis measurements of the obtained material showed a distinctive peak at 280 nm which, together with the presence of N on the surface of the nanomaterial (a band at 400 eV in the XPS spectrum) and zeta potential measurements, confirmed the successful immobilization of the protein. Additionally, the presence of two bands at 1652 and 1545 cm^-1 in the FT-IR spectra of both BSA and BSA-DA-Fe₂O₃ and steady-state fluorescence analysis validated that the protein preserved its native-like structure after the mechanochemical milling process. Also the functionalized MNPs preserved their magnetic properties as have been demonstrated by their magnetic susceptibility value.

Synthesis of Metal Nanoparticles in Metal-Phenolic Networks: Catalytic and Antimicrobial Applications of Coated Textiles

The synthesis of metal nanoparticle (NP)-coated textiles (nanotextiles) is achieved by a dipping process in water without toxic chemicals or complicated synthetic procedures. By taking advantage of the unique nature of tannic acid, metal-phenolic network-coated textiles serve as reducing and stabilizing sites for the generation of metal nanoparticles of controllable size. The textiles can be decorated with various metal nanoparticles, including palladium, silver, or gold, and exhibit properties derived from the presence of the metal nanoparticles, for example, catalytic activity in water (>96% over five cycles using palladium nanoparticles) and antibacterial activity against Gram-negative bacteria (inhibition of Escherichia coli using silver nanoparticles) that outperforms a commercial bandage. The reported strategy offers opportunities for the development of hybrid nanomaterials that may have application in fields outside of catalysis and antimicrobials, such as sensing and smart clothing.

Individually grown cobalt nanowires as magnetic force microscopy probes

AC electric fields were utilized in the growth of individual high-aspect ratio cobalt nanowires from simple salt solutions using the Directed Electrochemical Nanowire Assembly method. Nanowire diameters were tuned from the submicron scale to 40 nm by adjusting the AC voltage frequency and the growth solution concentration. The structural properties of the nanowires, including shape and crystallinity, were identified using electron microscopy. Hysteresis loops obtained along different directions of an individual nanowire using vibrating sample magnetometry showed that the magnetocrystalline anisotropy energy has the same order of magnitude as the shape anisotropy energy. Additionally, the saturation magnetization of an individual cobalt nanowire was estimated to be close to the bulk single crystal value. A small cobalt nanowire segment was grown from a conductive atomic force microscope cantilever tip that was utilized in magnetic force microscopy (MFM) imaging. The fabricated MFM tip provided moderate quality magnetic images of an iron-cobalt thin-film sample.

Spin canting across core/shell Fe3O4/MnxFe3-xO4 nanoparticles

Magnetic nanoparticles (MNPs) have become increasingly important in biomedical applications like magnetic imaging and hyperthermia based cancer treatment. Understanding their magnetic spin configurations is important for optimizing these applications. The measured magnetization of MNPs can be significantly lower than bulk counterparts, often due to canted spins. This has previously been presumed to be a surface effect, where reduced exchange allows spins closest to the nanoparticle surface to deviate locally from collinear structures. We demonstrate that intraparticle effects can induce spin canting throughout a MNP via the Dzyaloshinskii-Moriya interaction (DMI). We study ~7.4 nm diameter, core/shell Fe₃O₄/Mn_xFe_3−xO₄ MNPs with a 0.5 nm Mn-ferrite shell. Mössbauer spectroscopy, x-ray absorption spectroscopy and x-ray magnetic circular dichroism are used to determine chemical structure of core and shell. Polarized small angle neutron scattering shows parallel and perpendicular magnetic correlations, suggesting multiparticle coherent spin canting in an applied field. Atomistic simulations reveal the underlying mechanism of the observed spin canting. These show that strong DMI can lead to magnetic frustration within the shell and cause canting of the net particle moment. These results illuminate how core/shell nanoparticle systems can be engineered for spin canting across the whole of the particle, rather than solely at the surface.

Magnetic Nanomaterials: Chemical Design, Synthesis, and Potential Applications

Magnetic nanomaterials (MNMs) have attracted significant interest in the past few decades because of their unique properties such as superparamagnetism, which results from the influence of thermal energy on a ferromagnetic nanoparticle. In the superparamagnetic size regime, the moments of nanoparticles fluctuate as a result of thermal energy. To understand the fundamental behavior of superparamagnetism and develop relevant potential applications, various preparation routes have been explored to produce MNMs with desired properties and structures. However, some challenges remain for the preparation of well-defined magnetic nanostructures, including exchange-coupled nanomagnets, which are considered as the next generation of advanced magnets. In such a case, effective synthetic methods are required to achieve control over the chemical composition, size, and structure of MNMs. For instance, liquid-phase chemical syntheses, a set of emerging approaches to prepare various magnetic nanostructures, facilitate precise control over the nucleation and specific growth processes of nanomaterials with diverse structures. Among them, the high-temperature organic-phase method is an indispensable one in which the microstructures and physical/chemical properties of MNMs can be tuned by controlling the reaction conditions such as precursor, surfactant, or solvent amounts, reaction temperature or time, reaction atmosphere, etc. In this Account, we present an overview of our progress on the chemical synthesis of various MNMs, including monocomponent nanostructures (e.g., metals, metal alloys, metal oxides/carbides) and multicomponent nanostructures (heterostructures and exchange-coupled nanomagnets). We emphasize the high-temperature organic-phase synthetic method, on which we have been focused over the past decade. Notably, multicomponent nanostructures, obtained by growing or incorporating different functional components together, not only retain the functionalities of each single component but also possess synergic properties that emerge from interfacial coupling, with improved magnetic, optical, or catalytic features. Herein, potential applications of MNMs are covered in three representative areas: biomedicine, catalysis, and environmental purification. Regarding biomedicine, MNMs can detect or target biological entities after being modified with specific biomolecules, and they can be applied to magnetic resonance imaging, imaging-guided drug delivery, and photothermal therapy. Apart from their magnetic features, the catalytic performance of some MNMs resulting from their highly specific chemical components and surface structure will be briefly introduced, highlighting its impact in the methanol oxidation reaction, the oxygen reduction reaction, the oxygen and hydrogen evolution reactions, and the Fischer-Tropsch synthesis. Finally, environmental purification, primarily for water remediation, will be highlighted with two main aspects: the effective capture of bacteria and the removal of adverse ions in wastewater. We hope that this Account will clarify the progress on the controllable preparation of MNMs with specific compositions, sizes, and structures and generate broad interest in the realms of biomedicine and catalysis as well as in environmental issues and other potential applications.

Multifunctional Porous Iron Oxide Nanoagents for MRI and Photothermal/Chemo Synergistic Therapy

Nanoagents of integrating multiple imaging and therapeutic modalities have attracted tremendous attention for biomedical applications. Herein, we synthesize porous hollow Fe₃O₄ as a theranostic agent for MRI and combined photothermal/chemo cancer therapy. The as-prepared porous iron oxide nanoagents allow for T₂-weighted MR imaging. Interestingly, we demonstrate that the porous structure endows the nanoagents an outstanding photothermal property for cancer cell killing, in comparison with other types of iron oxide nanomaterials. Under the exposure of an NIR laser, the heat produced by porous Fe₃O₄ can accelerate the release of the loaded drug (e.g., DOX) to enhance chemotherapeutic efficacy, promoting the ablation of cancer cells with synergistic photothermal/chemotherapy.

Ligand mediated evolution of size dependent magnetism in cobalt nanoclusters

We use density functional theory to model the impact of a ligand shell on the magnetic properties of Co_N (15 ≤ N ≤ 55) nanoclusters. We study three different ligand shells on each nanocluster core size, each known to have different electronic interactions with the surface: pure Cl ligand shells (X-type), pure PH₃ ligand shells (L-type), and two component ligand shells with mixtures of Cl and PH₃ ligands. The simulations show that the identity, arrangement, and total coverage of the ligand shell controls the distribution of local magnetic moments across the Co_N core. On the surface of an unpassivated Co_N nanocluster, the Co-Co coordination number (CN) is known to determine the local magnetic moments. Upon the introduction of a ligand, the Co-Co CN remains important, however the nature of the metal-ligand bond changes the extent to which increasing Co-Co CN quenches magnetism. Further, we identify an additional and significant long-range impact on local magnetic moments (LMM) from the PH₃ ligand shells. Thus, we establish important design principles of magnetic nanoclusters, where ligand shell chemistry mediates the distribution of LMMs across a Co_NL_M nanocluster, allowing a route to rational design of specific magnetic properties.

Oxidative C-H activation of amines using protuberant lychee-like goethite

Goethite with protuberant lychee morphology has been synthesized that accomplishes C-H activation of N-methylanilines to generate α-aminonitriles; the catalyst takes oxygen from air and uses it as a co-oxidant in the process.

Electrode-particle impacts: a users guide

We present a comprehensive guide to nano-impact experiments, in which we introduce newcomers to this rapidly-developing field of research. Central questions are answered regarding required experimental set-ups, categories of materials that can be detected, and the theoretical frameworks enabling the analysis of experimental data. Commonly-encountered issues are considered and presented alongside methods for their solutions.

Janus Iron Oxides @ Semiconducting Polymer Nanoparticle Tracer for Cell Tracking by Magnetic Particle Imaging

Iron oxides nanoparticles tailored for magnetic particle imaging (MPI) have been synthesized, and their MPI signal intensity is three-times that of commercial MPI contrast (Ferucarbotran, also called Vivotrax) and seven-times that of MRI contrast (Feraheme) at the same Fe concentration. MPI tailored iron oxide nanoparticles were encapsulated with semiconducting polymers to produce Janus nanoparticles that possessed optical and magnetic properties for MPI and fluorescence imaging. Janus particles were applied to cancer cell labeling and in vivo tracking, and as few as 250 cells were imaged by MPI after implantation, corresponding to an amount of 7.8 ng of Fe. Comparison with MRI and fluorescence imaging further demonstrated the advantages of our Janus particles for MPI-super sensitivity, unlimited tissue penetration, and linear quantitativity.

Ultrasmall Ir nanoparticles for efficient acidic electrochemical water splitting

1.8 nm monodisperse Ir nanoparticles have been prepared through a colloidal synthetic method, and further used as electrocatalysts for superior activity and long-term stability toward overall water splitting in acidic media.

Shape control of nickel crystals and catalytic hydrogenation performance of ruthenium-on-Ni crystals

Nickel crystals with various shapes were obtained via hydrothermal synthesis. The effect of temperature and surfactant on nickel morphology was studied.

Manipulating the morphology of the nano oxide domain in AuCu–iron oxide dumbbell-like nanocomposites as a tool to modify magnetic properties

We highlighted the effects of oleic acid on the structural and magnetic properties of colloidal nanodumbbells.

Enhancing low-field magnetoresistance in magnetite nanoparticles via zinc substitution

Zn-doping facilitates the alignment of magnetization direction of sub-10 nm Fe₃O₄ nanoparticles and enhances room temperature low-field magnetoresistance (LFMR).

Enantioselective separation of RS-mandelic acid using β-cyclodextrin modified Fe3O4@SiO2/Au microspheres

β-Cyclodextrin functionalized magnetic microspheres were prepared via a self-assembly method and applied for the enantioselective absorption of enantiomers.

Preparation of metallic monolithic Pt/FeCrAl fiber catalyst by suspension spraying for VOCs combustion

We report a facile and general strategy for the preparation of metallic monolithic catalysts. Our strategy involved subjecting the surfaces of FeCrAl fibers to thermal treatment and the spraying of Pt nanoparticles suspension liquid. The catalyst exhibited high catalytic activity and good stability in the combustion of volatile organic compounds to CO₂ and H₂O at mild temperature. The exceptional activity of the catalyst can be attributed to the well-adhered alumina coating that formed on the surfaces of the FeCrAl fibers after thermal treatment and the highly dispersed Pt nanoparticles on the surface of the alumina coating.

The catalyst was prepared by surface thermal treatment and spraying, and exhibited activity for the combustion of VOCs to CO₂ and H₂O.

Tuning the structure and magnetic behavior of Ni–Ir-based nanoparticles in ionic liquids

We report on a simple preparation of extremely small diameter (ca. 2 nm) Ni–Ir-based NPs with either core–shell like or alloy-like microstructures.

Aptamer-functionalized magnetic and fluorescent nanospheres for one-step sensitive detection of thrombin

A one-step sandwich method is described for detecting proteins with magnetic nanospheres (MNs) and fluorescent nanospheres (FNs). Thrombin is selected as a model analyte to validate the method. Two DNA aptamers (Apt 29 and Apt 15 targeting two different exosites of thrombin) are chosen as recognition elements to modify MNs and FNs. The superparamagnetic MN-Apt 29 conjugate is used to separate and concentrate thrombin. The FN-Apt 15 conjugate encapsulates hundreds of fluorescent quantum dots and is used as reporter to provide a stable signal. Magnetic capture and fluorescence identification are performed simultaneously to form a sandwich complex (MN-Apt 29-thrombin-FN-Apt 15) for fluorescence determination (at excitation/emission wavelengths of 380/622 nm). The method is convenient, time saving, and gives a strong signal (compared to the two-step method where capture and identification are performed in two steps). The one-step method presented here is completed within 30 min and has a 3.5 ng·mL^-1 (97 pM) detection limit. The method is reproducible, has an intra-assay variability of 1.5%, and an inter-assay variability of 4.9%. Other serum proteins (HSA, CEA, PSA, and AFP) do not interfere. The method was also applied to analyze serum samples. Almost the same fluorescence intensity was measured when analyzing 1% serum samples (compared to buffer samples). Graphical abstract Magnetic nanospheres with excellent superparamagnetic property and fluorescent QD-based nanospheres were prepared and used in a one-step sensitive method for detecting thrombin. The method exhibits good reproducibility, high specificity, and good selectivity.

Fabrication and evaluation of magnetic phosphodiesterase-5 linked nanoparticles as adsorbent for magnetic dispersive solid-phase extraction of inhibitors from Chinese herbal medicine prior to ultra-high performance liquid chromatography-quadrupole time-of-flight mass spectrometry analysis

In the present study, the preparation of the magnetic phosphodiesterase-5 linked Fe₃O₄@ SiO₂ nanoparticles was successfully achieved by amide reaction and the magnetic phosphodiesterase-5 linked Fe₃O₄@SiO₂ nanoparticles were evaluated as a new adsorbent for magnetic dispersive solid-phase extraction of ligands from medicinal plant samples before the analysis by UHPLC-Q-TOF/MS. The prepared phosphodiesterase-5 linked Fe₃O₄@SiO₂ nanoparticles were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy, vibration sample magnetometer and potential laser particle size analyzer. The effects of EDC concentration, incubation time and bead-protein ratio on the amount of immobilized protein were studied. The main experimental parameters affect extraction efficiency of ligands, such as wash times, wash solvents, incubation pH, ion strength and incubation temperature, were investigated and optimized by using echinacoside as a model compound. The absolute recovery of echinacoside was ranged from 98.36%-102.16% in Cistanche tubulosa sample under the optimal extraction conditions. Good linearity was observed in the investigated concentration range of 0.006 mgmL^-1-0.97 mgmL^-1(R² = 0.9999). The limit of detection was 0.002 mgmL^-1. The RSDs of within-day and between-day precision were less than 2.3%. Due to the excellent magnetic behavior of Fe₃O₄@SiO₂ nanoparticles, the proposed method was shown to be simple and rapid. Remarkably, the magnetic phosphodiesterase-5 linked Fe₃O₄@SiO₂ nanoparticles could be recycled for ten times with loss of 10% activity.

Substrate-free copper nanoclusters exhibit super diamagnetism and surface based soft ferromagnetism

Pure metallic copper nanoparticles free of any substrate were synthesized by the thermo-chemical reduction of copper acetate using triethanolamine as a reducing-cum-protection agent. The structure and physical and magnetic properties of the Cu NPs were analysed physicochemically. Microscopic analysis reveals the formation of particles of size of 3-5 nm as seen by TEM but present as a large agglomeration as identified by SEM. A structure of Cu₉ is predicted for the Cu NPs on the basis of investigations using XPS, MALDI, EPR, and magnetic measurements and supported by the prediction of DFT calculation from an earlier work. The most important findings come from magnetization studies which prove the existence of giant diamagnetism from the nanomer clusters of copper as well as the formation of two different ferromagnetic transitions at ∼40 K and ∼100 K, the latter two arising from the surface properties possibly due to thin films of CuO and/or the presence of TEOA giving rise to temperature dependent coercivity revealing them to be soft room temperature ferromagnets. The clusters of Cu NPs with the identified structure show temperature and field dependent giant diamagnetism which is about 29-39 times larger than the diamagnetism calculated from known and established atomic values. Though such enhanced diamagnetism has been predicted for noble metal clusters, experimental observation so far has been restricted to Au and Pt and this is probably the first report on substrate-free metallic copper clusters.

Reduced Magnetism in Core-Shell Magnetite@MOF Composites

The magnetic susceptibility of synthesized magnetite (Fe₃O₄) microspheres was found to decline after the growth of a metal-organic framework (MOF) shell on the magnetite core. Detailed structural analysis of the core-shell particles using scanning electron microscopy, transmission electron microscopy, atom probe tomography, and⁵⁷Fe-Mössbauer spectroscopy suggests that the distribution of MOF precursors inside the magnetic core resulted in the oxidation of the iron oxide core.

Improving the Stability and Size Tunability of Cesium Lead Halide Perovskite Nanocrystals Using Trioctylphosphine Oxide as the Capping Ligand

Recently, all-inorganic cesium lead halide (CsPbX₃, X = Cl, Br, and I) nanocrystals (NCs) have drawn wide attention because of their excellent optoelectronic properties and potential applications. However, one of the most significant challenges of such NCs is their low stability against protonic solvents. In this work, we demonstrate that by incorporating a highly branched capping ligand, trioctylphosphine oxide (TOPO), into the traditional oleic acid/oleylamine system, monodisperse CsPbX₃ NCs with excellent optoelectronic properties can be achieved at elevated temperatures (up to 260 °C). The size of such NCs can be varied in a relatively wide range. The capping of TOPO on NCs has been verified through Fourier transform infrared spectroscopy measurement. More importantly, the presence of TOPO can dramatically improve the stability of CsPbX₃ NCs against ethanol treatment. After ethanol treatment for 100 min, the emission intensity of the TOPO-capped sample dropped only 5%, whereas that of non-TOPO-capped NCs dropped up to 86%. This work may shed some light on the preparation and application of CsPbX₃ NCs with higher stability.

Au/Cu Bimetallic Nanoparticles via Double-Target Sputtering onto a Liquid Polymer

Alloy nanoparticles (NPs) of a bimetal system, Au/Cu, that form intermetallic compounds in a bulk state have been successfully produced using a double-target sputtering technique onto a low-cost and biocompatible liquid polymer (polyethylene glycol, PEG). The formation of an Au/Cu solid solution alloy in individual NPs was revealed by scanning transmission electron microscopy-energy-dispersive X-ray elemental mapping analysis. Altering the sputter currents for Au and Cu targets resulted in a tailored NP composition, but the particle sizes did not significantly vary. We found similar structures, sizes, and optical properties of Au/Cu NPs obtained by double-head sputtering on carbon-coated transmission electron microscopy grids or PEG and by Au/Cu alloy target sputtering. Random alloy formation occurred in matrix sputtering using double-target heads. This method is advantageous for manipulating the alloy composition through highly independent control of sputter parameters for each metal target.

From Colloidal Monodisperse Nickel Nanoparticles to Well-Defined Ni/Al2O3 Model Catalysts

In the past few decades, advances in colloidal nanoparticle synthesis have created new possibilities for the preparation of supported model catalysts. However, effective removal of surfactants is a prerequisite to evaluate the catalytic properties of these catalysts in any reaction of interest. Here we report on the colloidal preparation of surfactant-free Ni/Al₂O₃ model catalysts. Monodisperse Ni nanoparticles (NPs) with mean particle size ranging from 4 to 9 nm were synthesized via thermal decomposition of a zerovalent precursor in the presence of oleic acid. Five weight percent Ni/Al₂O₃ catalysts were produced by direct deposition of the presynthesized NPs on an alumina support, followed by thermal activation (oxidation-reduction cycle) for complete surfactant removal and surface cleaning. Structural and morphological characteristics of the nanoscale catalysts are described in detail following the propagation of the bulk and surface Ni species at the different treatment stages. Powder X-ray diffraction, electron microscopy, and temperature-programmed reduction experiments as well as infrared spectroscopy of CO adsorption and magnetic measurements were conducted. The applied thermal treatments are proven to be fully adequate for complete surfactant removal while preserving the metal particle size and the size distribution at the level attained by the colloidal synthesis. Compared with standard impregnated Ni/Al₂O₃ catalysts, the current model materials display narrowed Ni particle size distributions and increased reducibility with a higher fraction of the metallic nickel atoms exposed at the catalyst surface.

Stabilizing Fe Nanoparticles in the SmCo5 Matrix

We report a new strategy for stabilizing Fe nanoparticles (NPs) in the preparation of SmCo₅-Fe nanocomposites. We coat the presynthesized Fe NPs with SiO₂ and assemble the Fe/SiO₂ NPs with Sm-Co-OH to form a mixture. After reductive annealing at 850 °C in the presence of Ca, we obtain SmCo₅-Fe/SiO₂ composites. Following aqueous NaOH washing and compaction, we produced exchange-coupled SmCo₅-Fe nanocomposites with Fe NPs controlled at 12 nm. Our work demonstrates a successful strategy of stabilizing high moment magnetic NPs in a hard magnetic matrix to produce a nanocomposite with tunable magnetic properties.

Confined Nucleation and Growth of PdO Nanocrystals in a Seed-Free Solution inside Hollow Nanoreactor

This paper reports a novel and adaptable hollow nanoreactor system containing a solution of cucurbituril (CB) inside a silica nanoparticle (CB@h-SiO₂) which enables the nucleation and formation of nanocrystals (NCs) to be confined at the seed-free interior solution inside the cavity. The above nanospace confinement strategy restricted the volume of medium available for NC formation to the solution inside the cavity to a few tens of nanometers in size and allowed homogeneous NC nucleation to be examined. Harboring of CB@h-SiO₂ in a Pd²⁺ complex solution confined the nucleation and formation of PdO NCs to the well-isolated nanosized cavity protected by the silica nanoshell, allowing the convoluted formation of clustered PdO NCs to be thoroughly examined. The corresponding temporal investigation indicated that PdO NC clusters evolved via a distinct pathway combining dendritic growth on early nucleated seed NCs and attachment of small intermediate clusters. In addition, the explored strategy was used to fabricate a recyclable nanocatalyst system for selective catalytic oxidation of cinammyl alcohols, featuring a cavity-included Fe₃O₄/PdO nanocomposite.

Corn-like, recoverable γ-Fe2O3@SiO2@TiO2 photocatalyst induced by magnetic dipole interactions

Corn-like, γ-Fe2O3@SiO2@TiO2 core/shell heterostructures were synthesized by a modified solvothermal reduction combined with a sol-gel method. SiO2 shells were first deposited on monodisperse Fe3O4 microspheres by a sol-gel method. Fe3O4@SiO2@TiO2 corn-like heterostructures were then obtained by sequential TiO2 coating, during which the magnetic dipolar interactions induced the anisotropic self-assembly process. After annealing at 350 °C, the crystalized TiO2 enhanced photocatalytic activity, while Fe3O4 was converted to γ-Fe2O3. The corn-like γ-Fe2O3@SiO2@TiO2 photocatalyst can be recycled and reused by magnet extraction. Despite the photocatalytic activity decreased with each cycle, it can be completely recovered by moderate heating at 200 °C.

Janus plasmonic-magnetic gold-iron oxide nanoparticles as contrast agents for multimodal imaging

The design of compact nanoprobes for multimodal bioimaging is a current challenge and may have a major impact on diagnostics and therapeutics. Multicomponent gold-iron oxide nanoparticles have shown high potential as contrast agents in numerous imaging techniques due to the complementary features of iron oxide and gold nanomaterials. In this paper we describe novel gold-iron oxide Janus magnetic-plasmonic nanoparticles as versatile nanoprobes for multimodal imaging. The nanoparticles are characterized as contrast agents for different imaging techniques, including X-ray computed tomography (CT), T₂-weighted nuclear magnetic resonance imaging (MRI), photoacoustic imaging (PA), dark-field and bright-field optical microscopy, transmission electron microscopy (TEM), and surface enhanced Raman spectroscopy (SERS). We discuss the effect of particle size and morphology on their performance as contrast agents and show the advantage of a Janus configuration. Additionally, the uptake of nanoparticles by cells can be simultaneously visualized in dark- and bright-field optical microscopy, SERS mapping, and electron microscopy. These complementary techniques allow a complete view of cell uptake in an artifact-free manner, with multiplexing capabilities, and with extra information regarding the nanoparticles' fate inside the cells. Altogether, the results obtained with these non-invasive techniques show the high versatility of these nanoparticles, the advantages of a Janus configuration, and their high potential in multipurpose biomedical applications.

Selective synthesis of Fe3O4Au x Ag y nanomaterials and their potential applications in catalysis and nanomedicine

In these recent years, magnetite (Fe3O4) has witnessed a growing interest in the scientific community as a potential material in various fields of application namely in catalysis, biosensing, hyperthermia treatments, magnetic resonance imaging (MRI) contrast agents and drug delivery. Their unique properties such as metal-insulator phase transitions, superconductivity, low Curie temperature, and magnetoresistance make magnetite special and need further investigation. On the other hand, nanoparticles especially gold nanoparticles (Au NPs) exhibit striking features that are not observed in the bulk counterparts. For instance, the mentioned ferromagnetism in Au NPs coated with protective agents such as dodecane thiol, in addition to their aptitude to be used in near-infrared (NIR) light sensitivity and their high adsorptive ability in tumor cell, make them useful in nanomedicine application. Besides, silver nanoparticles (Ag NPs) are known as an antimicrobial agent. Put together, the [Formula: see text] nanocomposites with tunable size can therefore display important demanding properties for diverse applications. In this review, we try to examine the new trend of magnetite-based nanomaterial synthesis and their application in catalysis and nanomedicine.

The Structural Fate of Individual Multicomponent Metal-Oxide Nanoparticles in Polymer Nanoreactors

Multicomponent nanoparticles can be synthesized with either homogeneous or phase-segregated architectures depending on the synthesis conditions and elements incorporated. To understand the parameters that determine their structural fate, multicomponent metal-oxide nanoparticles consisting of combinations of Co, Ni, and Cu were synthesized by using scanning probe block copolymer lithography and characterized using correlated electron microscopy. These studies revealed that the miscibility, ratio of the metallic components, and the synthesis temperature determine the crystal structure and architecture of the nanoparticles. A Co-Ni-O system forms a rock salt structure largely owing to the miscibility of CoO and NiO, while Cu-Ni-O, which has large miscibility gaps, forms either homogeneous oxides, heterojunctions, or alloys depending on the annealing temperature and composition. Moreover, a higher-ordered structure, Co-Ni-Cu-O, was found to follow the behavior of lower ordered systems.

Functional magnetic hybrid nanomaterials for biomedical diagnosis and treatment

Magnetic nanomaterials integrating supplemental functional materials are called magnetic hybrid nanomaterials (MHNs). Such MHNs have drawn increasing attention due to their biocompatibility and the potential applications either as alternative contrast enhancing agents or effective heat nanomediators in hyperthermia therapy. The joint function comes from the hybrid nanostructures. Hybrid nanostructures of different modification can be easily achieved owing to the large surface-area-to-volume ratio and sophisticated surface characteristic. In this focus article, we mainly discussed the design and synthesis of MHNs and their applications as multimodal imaging probes and therapy agents in biomedicine. These MHNs consisting magnetic nanomaterials with functional nanocomponents such as noble metal or isotopes could perform not only superparamagnetism but also features that can be adapted in, for example, enhancing computed tomography contrast modalities, positron emission tomography, and single-photon emission computed tomography. The combination of several techniques provides more comprehensive information by both synergizing the advantages, such as quantitative evaluation, higher sensitivity and spatial resolution, and mitigating the disadvantages. Such hybrid nanostructures could also provide a unique nanoplatform for enhanced medical tracing, magnetic field, and light-triggered hyperthermia. Moreover, potential advantages and opportunities will be achieved via a combination of diagnostic and therapeutic agents within a single platform, which is so-called 'theranostics.' We expect the combination of unique structural characteristics and integrated functions of multicomponent magnetic hybrid nanomaterials will attract increasing research interest and could lead to new opportunities in nanomedicine and nanobiotechnology. WIREs Nanomed Nanobiotechnol 2018, 10:e1476. doi: 10.1002/wnan.1476 This article is categorized under: Diagnostic Tools > Diagnostic Nanodevices.

Aligned cuboid iron nanoparticles by epitaxial electrodeposition

Aligned, individual iron square cuboid nanoparticles have been achieved by taking advantage of epitaxial, three-dimensional-island growth on GaAs(001) during electrodeposition at low deposition rates. The nanoparticles exhibit lateral dimensions between 10 and 80 nm and heights below 40 nm. Surface {100} facets predominate with a thin crystalline oxide shell that protects the nanoparticles during prolonged storage in air. The single crystallinity of the iron in combination with structural alignment leads to an in-plane magnetic anisotropy. These immobilized, oriented, and stable nanoparticles are promising for applications in nanoelectronic, sensor, and data storage technologies, as well as for the detailed analysis of the effect of shape and size on magnetism at the nanoscale.

Intermetallic Nanocrystals: Syntheses and Catalytic Applications

At the forefront of nanochemistry, there exists a research endeavor centered around intermetallic nanocrystals, which are unique in terms of long-range atomic ordering, well-defined stoichiometry, and controlled crystal structure. In contrast to alloy nanocrystals with no elemental ordering, it is challenging to synthesize intermetallic nanocrystals with a tight control over their size and shape. Here, recent progress in the synthesis of intermetallic nanocrystals with controllable sizes and well-defined shapes is highlighted. A simple analysis and some insights key to the selection of experimental conditions for generating intermetallic nanocrystals are presented, followed by examples to highlight the viable use of intermetallic nanocrystals as electrocatalysts or catalysts for various reactions, with a focus on the enhanced performance relative to their alloy counterparts that lack elemental ordering. Within the conclusion, perspectives on future developments in the context of synthetic control, structure-property relationships, and applications are discussed.

Magnetism at the Interface of Magnetic Oxide and Nonmagnetic Semiconductor Quantum Dots

Engineering interfaces specifically in quantum dot (QD) heterostructures provide several prospects for developing multifunctional building block materials. Precise control over internal structure by chemical synthesis offers a combination of different properties in QDs and allows us to study their fundamental properties, depending on their structure. Herein, we studied the interface of magnetic/nonmagnetic Fe₃O₄/CdS QD heterostructures. In this work, we demonstrate the decrease in the size of the magnetic core due to annealing at high temperature by the decrease in saturation magnetization and blocking temperature. Furthermore, surprisingly, in a prominently optically active and magnetically inactive material such as CdS, we observe the presence of substantial exchange bias in spite of the nonmagnetic nature of CdS QDs. The presence of exchange bias was proven by the increase in magnetic anisotropy as well as the presence of exchange bias field (H_E) during the field-cooled magnetic measurements. This exchange coupling was eventually traced to the in situ formation of a thin antiferromagnetic FeS layer at the interface. This is verified by the study of Fe local structure using X-ray absorption fine structure spectroscopy, demonstrating the importance of interface engineering in QDs.

Large-Scale, Facile Transfer of Oleic Acid-Stabilized Iron Oxide Nanoparticles to the Aqueous Phase for Biological Applications

Fe₃O₄ nanoparticles synthesized via thermal decomposition in the organic phase have attracted tremendous research interest because of their unique morphology, size dispersion, and crystallinity. However, their poor water dispersibility strongly limited their development in biomedical applications. Therefore, a phase-transfer strategy through which hydrophobic nanoparticles with good performance in the aqueous phase can be obtained is an extremely critical issue. Herein, we present a large-scale, facile, highly efficient strategy for the phase transfer of oleic acid-coated Fe₃O₄ nanoparticles via a reverse-micelle-based oxidative reaction. The reverse micelle system improves the efficiency of the interface oxidative reaction and prevents the aggregation of nanoparticles during the reaction, facilitating the transfer of Fe₃O₄ nanoparticles from the organic phase to the aqueous phase. The transferred Fe₃O₄ nanoparticles are used as a T₂ contrast agent to perform magnetic resonance imaging of CNE2 cells (nasopharyngeal carcinoma cell line). In addition, the free carboxyl groups on the surface of transferred nanoparticles can also be programmed to permit the conjugation of other molecules, in turn allowing nanoparticles to be extended in biological targeting or biological recognition applications. Therefore, this strategy offers a promising platform for the large-scale, highly efficient phase transfer of oleic acid-capped nanoparticles and may become a new paradigm to promote the development of diverse nanoparticles for widespread biomedical applications.

DNA Modified Fe3O4@Au Magnetic Nanoparticles as Selective Probes for Simultaneous Detection of Heavy Metal Ions

Driven by the urgent need to detect trace heavy metal ions in various real water samples, this article demonstrates for the first time an electrochemical biosensor based on DNA modified Fe₃O₄@Au magnetic nanoparticles (NPs). Three DNA probes are designed to contain certain mismatched base pairs. One is thiolated and modified on the surface of Fe₃O₄@Au NPs (DNA 1). The other two probes (DNA 2 and 3) are labeled with two independent electrochemical species. Stable structures of cytosine-Ag⁺-cytosine and thymine-Hg²⁺-thymine formed in the presence of Ag⁺ and Hg²⁺ can assist the hybridization of DNA 1/DNA 2 and DNA 1/DNA 3, which locate corresponding electrochemical species onto the surface of the magnetic NPs. The achieved nanocomposites are then used as selective electrochemical probes for the detection of heavy metal ions by recording the square wave voltammetry signals. Simultaneous detection of Ag⁺ and Hg²⁺ is demonstrated without significant interference, and their individual high sensitivities are fundamentally preserved, which meet the requirements of U.S. Environmental Protection Agency (USEPA). Furthermore, the proposed method has been challenged by various real water samples. The results confirm the DNA modified magnetic NPs based sensing method may have potential applications for the monitoring of heavy metal ions in real sample analysis.

Triple-stimuli responsive polymers with fine tuneable magnetic responses

The formation of multi-stimuli responsive polymers exhibiting magnetic, pH and light sensitivity is reported.