Switchable host-guest systems on surfaces

Noncovalent assembly of reduced graphene oxide and alkyl-grafted mesoporous silica: an effective drug carrier for near-infrared light-responsive controlled drug release

In this paper, we report the assembly of reduced graphene oxide (RGO) and mesoporous silica grafted with alkyl chains (MSN-C₁₈) to develop a new class of drug carriers which are able to deliver the loaded drug molecules into living cells upon exposure to near-infrared (NIR) light. This novel drug carrier consists of a structure formed by the noncovalent interaction of RGO caps and alkyl chains on the surface of MSN-C₁₈. The capping of RGO sheets on mesoporous silica effectively blocks the pore mouths in the absence of NIR light. Conversely, and very importantly, the photothermal heating effect of RGO leads to a rapid increase in the local temperature upon exposure to NIR light, resulting in the weakening of the RGO sheet/alkyl chain noncovalent interaction. The RGO sheets will then be removed from the MSN surface, and the pores are uncapped. This uncapping mechanism makes it possible to release the loaded drug molecules upon irradiation with NIR light. In the present study, such a noncovalent assembly was examined by the use of doxorubicin as a model drug for NIR light-responsive intracellular controlled release studies. We believe that this noncovalent assembly will prove to be a promising drug delivery system for cancer therapy in the near future.

Light-controlled reversible formation and dissociation of nanorods via interconversion of pseudorotaxanes

Nanorod-like supramolecular aggregates are fabricated by the self-assembly of the amphiphilic [2]pseudorotaxane, which can be dissociated and rebuilt by the alternating UV/vis irradiation.

Mixed-metal metallocavitands: a new approach to tune their electrostatic potentials for controllable selectivity towards substituted benzene derivatives

We have successfully developed a new synthetic approach to modulate the electrostatic potentials of metallocavitands and thus their selective recognition towards substituted benzene derivatives via integrating two metal cations of different electronegativity into a self-assembled system.

Mono-benzimidazole functionalized β-cyclodextrins as supramolecular nanovalves for pH-triggered release of p-coumaric acid

The self-complexation of mono-benzimidazole functionalized β-cyclodextrins was investigated. The unique molecular structure employed as supramolecular nanovalves were installed on the external surface of mesoporous silica to assemble mechanized silica nanoparticles, which showed pH-triggered release property.

Esterase- and pH-responsive poly(β-amino ester)-capped mesoporous silica nanoparticles for drug delivery

Gating of mesoporous silica nanoparticles (MSNs) with the stimuli-responsive poly(β-amino ester) has been achieved. This hybrid nanocarrier releases doxorubicin (DOX) under acidic conditions or in the presence of porcine liver esterase. The DOX loaded poly(β-amino ester)-capped MSNs reduce cell viability when tested on MDA-MB-231 human breast cancer cells.

Combination drug release of smart cyclodextrin-gated mesoporous silica nanovehicles

An integrated γ-cyclodextrin-gated mesoporous silica delivery system via dual dynamic covalent bonds was constructed with dual drug loading for simultaneous and cascade release in targeted combination drug therapy.

Coupled molecular switching processes in ordered mono- and multilayers of stimulus-responsive rotaxanes on gold surfaces

Interfaces provide the structural basis for function as, for example, encountered in nature in the membrane-embedded photosystem or in technology in solar cells. Synthetic functional multilayers of molecules cooperating in a coupled manner can be fabricated on surfaces through layer-by-layer self-assembly. Ordered arrays of stimulus-responsive rotaxanes undergoing well-controlled axle shuttling are excellent candidates for coupled mechanical motion. Such stimulus-responsive surfaces may help integrate synthetic molecular machines in larger systems exhibiting even macroscopic effects or generating mechanical work from chemical energy through cooperative action. The present work demonstrates the successful deposition of ordered mono- and multilayers of chemically switchable rotaxanes on gold surfaces. Rotaxane mono- and multilayers are shown to reversibly switch in a coupled manner between two ordered states as revealed by linear dichroism effects in angle-resolved NEXAFS spectra. Such a concerted switching process is observed only when the surfaces are well packed, while less densely packed surfaces lacking lateral order do not exhibit such effects.

Enzyme-responsive protein/polysaccharide supramolecular nanoparticles

Biocompatible and enzyme-responsive supramolecular assemblies have attracted more and more interest in biomaterial fields, and find many feasible applications especially in the controlled drug release at specific sites where the target enzyme is located. In this work, novel supramolecular nanoparticles were successfully constructed from two biocompatible materials, i.e. a cyclic polysaccharide named sulfato-β-cyclodextrin (SCD) and a protein named protamine, through non-covalent association, and fully characterized by means of atomic force microscopy (AFM) and high-resolution transmission electron microscopy (TEM). Significantly, the disassembly of the resulting nanoparticles can respond especially to trypsin over other enzymes. Owing to their trypsin-triggered disassembly behaviors, these nanoparticles can efficiently release the encapsulated model substrate in a controlled manner. That is, the model substrate can be encapsulated inside the nanoparticles with a high stability and released when treated with trypsin.

Multi-Ligand-Binding Flavoprotein Dodecin as a Key Element for Reversible Surface Modification in Nano-biotechnology

In this paper the multiple (re)programming of protein-DNA nanostructures comprising generation, deletion, and reprogramming on the same flavin-DNA-modified surface is introduced. This work is based on a systematic study of the binding affinity of the multi-ligand-binding flavoprotein dodecin on flavin-terminated DNA monolayers by surface plasmon resonance and quartz crystal microbalance with dissipation (QCM-D) measurements, surface plasmon fluorescence spectroscopy (SPFS), and dynamic AFM force spectroscopy. Depending on the flavin surface coverage, a single apododecin is captured by one or more surface-immobilized flavins. The corresponding complex binding and unbinding rate constants kon(QCM) = 7.7 × 10(3) M(-1)·s(-1) and koff(QCM) = 4.5 × 10(-3) s(-1) (Kd(QCM) = 580 nM) were determined by QCM and were found to be in agreement with values for koff determined by SPFS and force spectroscopy. Even though a single apododecin-flavin bond is relatively weak, stable dodecin monolayers were formed on flavin-DNA-modified surfaces at high flavin surface coverage due to multivalent interactions between apododecin bearing six binding pockets and the surface-bound flavin-DNA ligands. If bi- or multivalent flavin ligands are adsorbed on dodecin monolayers, stable sandwich-type surface-DNA-flavin-apododecin-flavin ligand arrays are obtained. Nevertheless, the apododecin flavin complex is easily and quantitatively disassembled by flavin reduction. Binding and release of apododecin are reversible processes, which can be carried out alternatingly several times to release one type of ligand by an external redox trigger and subsequently replace it with a different ligand. Hence the versatile concept of reprogrammable functional biointerfaces with the multi-ligand-binding flavoprotein dodecin is demonstrated.

Polycation-functionalized gold nanoparticles with different morphologies for superior gene transfection

Favorable physical and chemical properties endow Au nanoparticles (Au NPs) with various biomedical applications. After appropriate surface functionalization, Au NPs could construct promising drug/gene carriers with multiple functions. There is now ample evidence that physicochemical properties, such as size, shape, and surface chemistry, can dramatically influence the behaviors of Au NPs in biological systems. Investigation of these parameters could be fundamentally important for the application of Au NPs as drug/gene carriers. In this work, we designed a series of novel gene carriers employing polycation-functionalized Au NPs with five different morphologies (including Au nanospheres, Au nano-octahedra, arrow-headed Au nanorods, and Au nanorods with different aspect ratios). The effects of the particle size and shape of these different carriers on gene transfection were investigated in detail. The morphology of Au NPs is demonstrated to play an important role in gene transfection. The most efficient gene carriers are those fabricated with arrow-headed Au nanorods. Au nanosphere-based carriers exhibit the poorest performance in gene transfection. In addition, Au nanorods with smaller aspect ratios perform better than longer ones. These results may provide new avenues to develop promising gene carriers and gain useful information on the interaction of Au NPs with biological systems.

Electrochemical Studies for Cation Recognition with Diazo-Coupled Calix[4]arenes

The electrochemical properties of diazophenylcalix[4]arenes bearing ortho-carboxyl group (o-CAC) and ortho-ester group (o-EAC), respectively, in the presence of various metal ions were investigated by voltammetry in CH3CN. o-CAC and o-EAC showed voltammetric changes toward divalent metal ions and no significant changes with monovalent alkali metal ions. However, o-CAC preferentially binds with alkaline earth and transition metal ions, whereas no significant changes in voltammetric signals are observed in o-EAC with alkaline earth metal ions. o-EAC only binds with other transition metal ions. This can be explained on metal ion complexation-induced release of proton from the azophenol to the quinone-hydrazone tautomer followed by internal complexation of the metal ion with aid of nitrogen atoms and ortho-carbonyl groups in the diazophenylazocalix[4]arenes.

Novel silica surface charge density mediated control of the optical properties of embedded optically active materials and its application for fiber optic pH sensing at elevated temperatures

Silica and silica incorporated nanocomposite materials have been extensively studied for a wide range of applications. Here we demonstrate an intriguing optical effect of silica that, depending on the solution pH, amplifies or attenuates the optical absorption of a variety of embedded optically active materials with very distinct properties, such as plasmonic Au nanoparticles, non-plasmonic Pt nanoparticles, and the organic dye rhodamine B (not a pH indicator), coated on an optical fiber. Interestingly, the observed optical response to varying pH appears to follow the surface charge density of the silica matrix for all the three different optically active materials. To the best of our knowledge, this optical effect has not been previously reported and it appears universal in that it is likely that any optically active material can be incorporated into the silica matrix to respond to solution pH or surface charge density variations. A direct application of this effect is for optical pH sensing which has very attractive features that can enable minimally invasive, remote, real time and continuous distributed pH monitoring. Particularly, as demonstrated here, using highly stable metal nanoparticles embedded in an inorganic silica matrix can significantly improve the capability of pH sensing in extremely harsh environments which is of increasing importance for applications in unconventional oil and gas resource recovery, carbon sequestration, water quality monitoring, etc. Our approach opens a pathway towards possible future development of robust optical pH sensors for the most demanding environmental conditions. The newly discovered optical effect of silica also offers the potential for control of the optical properties of optically active materials for a range of other potential applications such as electrochromic devices.

Light-gated molecular brakes based on pentiptycene-incorporated azobenzenes

Three azobenzene derivatives (2 R, 2 OR, and 2 NR) that differed in their terminal substituent (alkyl, alkyloxy, and dialkylamino, respectively) have been synthesized and investigated as molecular brakes, in which the rigid H-shaped pentiptycene group functioned as a rotor and the dinitrophenyl group as a "brake pad". The E and Z isomers of these compounds corresponded to the "brake-off" and "brake-on" states, respectively. The rotation rate of the rotor was evaluated by VT NMR spectroscopy for the brake-on state and by DFT calculations for the brake-off state. The difference between the rotation rates for the rotor in the two states was as large as eight orders of magnitude at ambient temperature. Photochemical switching of the azobenzene moieties afforded efficiencies of 55-67%. A combination of photochemical E→Z and thermal Z→E isomerization promoted the switching efficiency up to 78%. The terminal substituent affected both the photochemical and thermal switching efficiencies. Solvent polarity also played an important role in the lifetimes of the Z isomers. These azobenzene systems displayed similar braking powers but superior switching efficiencies to the stilbene analogue (1O R; ca. 60% vs 20%).

A γ-ray and dual redox-responsive supramolecular polymer constructed by a selenium containing pillar[5]arene dimer and a neutral guest

A novel linear supramolecular polymer was fabricated by self-assembly of a selenium containing pillar[5]arene dimer 1 and a neutral guest 2. This supramolecular polymer can be destroyed by irradiating γ-radiation, or adding H₂O₂ or GSH.

Supramolecular hydrophobic guest transport system based on pillar[5]arene

A pillar[5]arene-based bioactive guest loading system was developed, which increased the solubility of norharmane in aqueous medium.

Supramolecular assembly-induced yellow emission of 9,10-distyrylanthracene bridged bis(pillar[5]arene)s

Newly synthesized DSA-bridged bis(pillar[5]arene)s with AIE properties form linear supramolecular polymers upon binding to a neutral guest linker, exhibiting supramolecular assembly-induced yellow fluorescence emission.

A facile photopolymerization method for fabrication of pH and light dual reversible stimuli-responsive surfaces

This study proposes a simple and facile two-stage photopolymerization method for fabrication of pH and light dual reversible stimuli-responsive surfaces.

A dual targeting cyclodextrin/gold nanoparticle conjugate as a scaffold for solubilization and delivery of paclitaxel

A cyclodextrin/gold nanoparticle conjugate was constructed as a dual targeting scaffold for solubilization and delivery of anticancer drug paclitaxel.

A fluorescent bistable [2]rotaxane molecular switch on SiO2 nanoparticles

A fluorescent bistable [2]rotaxane was immobilized onto the surface of SiO₂ nanoparticles through click reaction. The shuttling motion of the macrocycle component was driven by external acid–base stimuli both in solution and on SiO₂ nanoparticles, accompanied by visual fluorescence changes.

A pH-responsive amphiphilic supramolecular graft copolymer constructed by crown ether based molecular recognition

Based on the bis(m-phenylene)-32-crown-10/paraquat molecular recognition motif in water, we have successfully prepared an amphiphilic supramolecular graft copolymer by the combination of modified hydrophilic poly(ethylene oxide) and hydrophobic polystyrene. It could self-assemble into pH-responsive bilayer vesicles in water.

Light-responsive peptide [2]rotaxanes as gatekeepers of mechanised nanocontainers

Novel mechanized silica nanoparticles incorporating a peptide-based molecular shuttle as a photo-responsive interlocked gatekeeper of nanocontainers are described including the uptake and delivery studies of a model cargo.

Cell-targeted platinum nanoparticles and nanoparticle clusters

The facile preparation of cell-targeted platinum nanoparticles (PtNPs) is described, using designed peptides that as a single molecule control PtNP cluster growth, stabilise clusters in aqueous suspension and enable attachment of a versatile range of cell-targeting ligands.

Sugar and pH dual-responsive snap-top nanocarriers based on mesoporous silica-coated Fe3O4 magnetic nanoparticles for cargo delivery

Sugar and pH operated snap-top nanocarriers, consisting of a superparamagnetic Fe₃O₄ core and a mesoporous silica shell and surface-functionalized covalently with β-CDs, were constructed.

Molecular and supramolecular switches on mesoporous silica nanoparticles

This review summarizes the recent advances of molecular and supramolecular switches installed on mesoporous silica nanoparticles.

Construction of photoswitchable rotaxanes and catenanes containing dithienylethene fragments

Mechanically interlocked structures such as rotaxanes and catenanes provide a novel backbone for constructing functional materials with unique structural characteristics.

Synthesis and evaluation of a novel Rhodamine B pyrene [2]rotaxane as an intracellular delivery agent for doxorubicin

RhBPy [2]rotaxane has been demonstrated to be an efficient transport agent for delivering the cancer drug doxorubicin (DOX) into tumor cells.

Bi-compartmental responsive polymer particles

A one-pot method to prepare bi-compartmental responsive polymer particles was developed by controlling the phase separation in polymerization; the resulting asymmetric particles can change their shapes and properties due to different responsive properties of the two parts.

“AND” logic gate regulated pH and reduction dual-responsive prodrug nanoparticles for efficient intracellular anticancer drug delivery

A copper ion-based core-cross-linking strategy is used to develop an AND logic gate regulated pH-/reduction-responsive antitumor drug delivery system.

Formation of ring-in-ring complexes between crown ethers and rigid TVBox8+

An octacationic tetraviologen-based cyclophane—so called TVBox⁸⁺—can form a ring-in-ring complex with bis-1,5-dinaphtho[50]crown-14, which represents a key intermediate for constructing molecular Borromean rings in a stepwise manner.

Aggregation-induced emission behavior of a pH-controlled molecular shuttle based on a tetraphenylethene moiety

A TPE-based molecular shuttle having amide and amine units has been synthesized. The shuttling motion of the macrocycle component can adjust its AIE behaviour.

Stimuli-responsive metal-organic frameworks gated by pillar[5]arene supramolecular switches

Spurred on by recent advances in materials chemistry and drug delivery, a new stimuli-responsive theranostic hybrid platform, based on mechanized monodisperse nano metal-organic frameworks (NMOFs) gated by carboxylatopillar[5]arene (CP5) switches with bio-friendly pH-triggered cargo release capabilities, has been constructed for the first time. This nanoscale smart cargo delivery system showed pH- and/or competitive binding agent-triggered controlled cargo release with negligible premature release, large pore sizes for drug encapsulation, low cytotoxicity, good biodegradability and biocompatibility, and potential application in cell imaging, which offers a new tool in targeted drug delivery and the controlled release of therapeutic agents.

Nanojunction between fullerene and one-dimensional conductive polymer on solid surfaces

Bottom-up creation of huge molecular complexes by covalently interconnecting functional molecules and conductive polymers is a key technology for constructing nanoscale electronic circuits. In this study, we have created an array of molecule-polymer nanojunctions from C60 molecules and polydiacetylene (PDA) nanowires at designated positions on solid surfaces by controlling self-assemblies and intermolecular chemical reactions of molecular ingredients predeposited onto the surfaces. In the proposed method, the construction of each nanojunction spontaneously proceeds via two types of chemical reactions: a chain polymerization among self-assembled diacetylene compound molecules for creating a single PDA nanowire and a subsequent cycloaddition reaction between the propagating forefront part of the PDA backbone and a single C60 molecule adsorbed on the surface. Scanning tunneling microscopy has proved that the C60 molecule is covalently connected to each end of the π-conjugated PDA backbone. Furthermore, the decrease in the energy gap of the C60 molecule in nanojunctions is observed as compared with that of pristine C60 molecules, which is considered to be due to the covalent interaction between the PDA edge and the C60 molecule.

Pillar[6]arene-valved mesoporous silica nanovehicles for multiresponsive controlled release

The synthesis and host-guest chemistry of pillararene (PA) derivatives are a hot research topic, and the applications of PAs in relevant research fields are essential to explore. Carboxylate-substituted pillar[6]arene (CPA[6])-valved mesoporous silica nanoparticles (MSNs) functionalized with dimethylbenzimidazolium (DMBI) and bipyridinium (BP) stalks were constructed, respectively, for multiresponsive controlled release. CPA[6] encircled the DMBI or BP stalks to develop supramolecular nanovalves for encapsulation of cargo within the MSN pores. The release of cargo was triggered by acidic pH or competitive binding for the dethreading of CPA[6] and the opening of the nanovalves; moreover, coordination chemistry is the first strategy to activate CPA nanovalves by metal chelating with the carboxylate groups of CPA for cargo release. The controlled release of the CPA[6]-valved MSN delivery systems can meet diverse requirements and has promising biological applications in targeted drug therapy.

Mesoporous Silica Nanoparticles Coated by Layer-by-Layer Self-assembly Using Cucurbit[7]uril for in Vitro and in Vivo Anticancer Drug Release

Mesoporous silica nanoparticles (MSNs) are promising solid supports for controlled anticancer drug delivery. Herein, we report biocompatible layer-by-layer (LbL) coated MSNs (LbL-MSNs) that are designed and crafted to release encapsulated anticancer drugs, e.g., doxorubicin hydrochloride (DOX), by changing the pH or by adding competitive agents. The LbL coating process comprises bis-aminated poly(glycerol methacrylate)s (BA-PGOHMAs) and cucurbit[7]uril (CB[7]), where CB[7] serves as a molecular bridge holding two different bis-aminated polymeric layers together by means of host-guest interactions. This integrated nanosystem is tuned to respond under specific acidic conditions or by adding adamantaneamine hydrochloride (AH), attributed to the competitive binding of hydronium ions or AH to CB[7] with BA-PGOHMAs. These LbL-MSN hybrids possess excellent biostability, negligible premature drug leakage at pH 7.4, and exceptional stimuli-responsive drug release performance. The pore sizes of the MSNs and bis-aminated compounds (different carbon numbers) of BA-PGOHMAs have been optimized to provide effective integrated nanosystems for the loading and release of DOX. Significantly, the operating pH for the controlled release of DOX matches the acidifying endosomal compartments of HeLa cancer cells, suggesting that these hybrid nanosystems are good candidates for autonomous anticancer drug nanocarriers actuated by intracellular pH changes without any invasive external stimuli. The successful cellular uptake and release of cargo, e.g., propidium iodide (PI), in human breast cancer cell line MDA-231 from PI-loaded LbL-MSNs have been confirmed by confocal laser scanning microscopy (CLSM), while the cytotoxicities of DOX-loaded LbL-MSNs have been quantified by the Cell Counting Kit-8 (CCK-8) viability assay against HeLa cell lines and fibroblast L929 cell lines. The uptake of DOX-loaded LbL-MSNs by macrophages can be efficiently reduced by adding biocompatible hydrophilic poly(ethylene glycol) or CB[7] without destroying the capping. In vivo tumor-growth inhibition experiments with BALB/c nude mice demonstrated a highly efficient tumor-growth inhibition rate of DOX-loaded LbL-MSNs, suggesting that the novel type of LbL-MSN materials hold great potentials in anticancer drug delivery.

Pillar[5]arene-based supramolecular organic frameworks for highly selective CO2-capture at ambient conditions

Low-density, solid-state, porous supramolecular organic frameworks are constructed using pillarenes. The frameworks have a honeycomb-like structure, permanent porosity, high thermal stability, and selective and reversible sorption properties toward CO2. The exceptionally selective CO2-sorption properties (375/1, 339/1) of one framework over N2 and CH4 indicate potential applications in CO2-capture for post-combustion power plants and natural gas sweetening.