Theoretical Insights into Photoinduced Charge Transfer and Catalysis at Oxide Interfaces

Decoherence Allows Model Reduction in Nonadiabatic Dynamics Simulations

A nonadiabatic (NA) molecular dynamics (MD) simulation requires calculation of NA coupling matrix elements, the number of which scales as a square of the number of basis states. The basis size can be huge in studies of nanoscale materials, and calculation of the NA couplings can present a significant bottleneck. A quantum-classical approximation, NAMD overestimates coherence in the quantum, electronic subsystem, requiring decoherence correction. Generally, decoherence times decrease with increasing energy separation between pairs of states forming coherent superpositions. Since rapid decoherence stops quantum dynamics, one expects that decoherence-corrected NAMD can eliminate the need for calculation of NA couplings between energetically distant states, notably reducing the computational cost. Considering several types of dynamics in a semiconductor quantum dot, we demonstrate that indeed, decoherence allows one to reduce the number of needed NA coupling matrix elements. If the energy levels are spaced closer than 0.1 eV, one obtains good results while including only three nearest-neighbor couplings, and in some cases even with just the first nearest-neighbor coupling scheme. If the energy levels are spaced by about 0.4 eV, the nearest-neighbor model fails, while three or more nearest-neighbor schemes also provide good results. In comparison, the results of NAMD simulation without decoherence vary continuously with changes in the number of NA couplings. Thus, decoherence effects induced by coupling to a quantum-mechanical environment not only provide the physical mechanism for NAMD trajectory branding and improve the accuracy of NAMD simulations, but also afford significant computational savings.

Impact of Ga-V Codoping on Interfacial Electron Transfer in Dye-Sensitized TiO2

The improvement of charge transfer between an organic molecule and a semiconductor is an important and challenging goal in the fields of photovoltaics and photocatalysis. In this work, we present a time-dependent density functional theory investigation of the impact of Ga-V codoping of TiO2 on the excited-state electron injection from perylene-3-carboxylic acid. The doping is shown to raise the charge-transfer efficiency for the highest possible surface dye uptake by ∼16%. The strength of the effect depends on the dopant-pair-dye separation, dopant concentration, and distribution of Ga, V atoms in TiO2. The doping of the superficial level turns out to be more favorable than those in the bulk. The changes in electron injection dynamics are attributed to the modification of accepting semiconductor levels and hybridization profile between molecular and semiconductor states.

Mixed quantum-classical dynamics for charge transport in organics

Charge transport plays a crucial role in the working principle of most opto-electronic and energy devices. This is especially true for organic materials where the first theoretical models date back to the 1950s and have continuously evolved ever since. Most of these descriptions rely on perturbation theory to treat small interactions in the Hamiltonian. In particular, applying a perturbative treatment to the electron-phonon and electron-electron coupling results in the band and hopping models, respectively, the signature of which is conveyed by a characteristic temperature dependence of mobility. This perspective describes recent progress of studying charge transport in organics using mixed quantum-classical dynamics techniques, including mean field and surface hopping theories. The studies go beyond the perturbation treatments and represent the processes explicitly in the time-domain, as they occur in real life. The challenges, advantages, and disadvantages of both approaches are systematically discussed. Special focus is dedicated to the temperature dependence of mobility, the role of local and nonlocal electron-phonon couplings, as well as the interplay between electronic and electron-phonon interactions.

Crucial Role of Nuclear Dynamics for Electron Injection in a Dye-Semiconductor Complex

We investigate the electron injection from a terrylene-based chromophore to the TiO2 semiconductor bridged by a recently proposed phenyl-amide-phenyl molecular rectifier. The mechanism of electron transfer is studied by means of quantum dynamics simulations using an extended Hückel Hamiltonian. It is found that the inclusion of the nuclear motion is necessary to observe the photoinduced electron transfer. In particular, the fluctuations of the dihedral angle between the terrylene and the phenyl ring modulate the localization and thus the electronic coupling between the donor and acceptor states involved in the injection process. The electron propagation shows characteristic oscillatory features that correlate with interatomic distance fluctuations in the bridge, which are associated with the vibrational modes driving the process. The understanding of such effects is important for the design of functional dyes with optimal injection and rectification properties.

Biosolar cells: global artificial photosynthesis needs responsive matrices with quantum coherent kinetic control for high yield

This contribution discusses why we should consider developing artificial photosynthesis with the tandem approach followed by the Dutch BioSolar Cells consortium, a current operational paradigm for a global artificial photosynthesis project. We weigh the advantages and disadvantages of a tandem converter against other approaches, including biomass. Owing to the low density of solar energy per unit area, artificial photosynthetic systems must operate at high efficiency to minimize the land (or sea) area required. In particular, tandem converters are a much better option than biomass for densely populated countries and use two photons per electron extracted from water as the raw material into chemical conversion to hydrogen, or carbon-based fuel when CO₂ is also used. For the average total light sum of 40 mol m⁻² d⁻¹ for The Netherlands, the upper limits are many tons of hydrogen or carbon-based fuel per hectare per year. A principal challenge is to forge materials for quantitative conversion of photons to chemical products within the physical limitation of an internal potential of ca 2.9 V. When going from electric charge in the tandem to hydrogen and back to electricity, only the energy equivalent to 1.23 V can be stored in the fuel and regained. A critical step is then to learn from nature how to use the remaining difference of ca 1.7 V effectively by triple use of one overpotential for preventing recombination, kinetic stabilization of catalytic intermediates and finally generating targeted heat for the release of oxygen. Probably the only way to achieve this is by using bioinspired responsive matrices that have quantum–classical pathways for a coherent conversion of photons to fuels, similar to what has been achieved by natural selection in evolution. In appendix A for the expert, we derive a propagator that describes how catalytic reactions can proceed coherently by a convergence of time scales of quantum electron dynamics and classical nuclear dynamics. We propose that synergy gains by such processes form a basis for further progress towards high efficiency and yield for a global project on artificial photosynthesis. Finally, we look at artificial photosynthesis research in The Netherlands and use this as an example of how an interdisciplinary approach is beneficial to artificial photosynthesis research. We conclude with some of the potential societal consequences of a large-scale roll out of artificial photosynthesis.

Fe(II)-Polypyridines as Chromophores in Dye-Sensitized Solar Cells: A Computational Perspective

Over the past two decades, dye-sensitized solar cells (DSSCs) have become a viable and relatively cheap alternative to conventional crystalline silicon-based systems. At the heart of a DSSC is a wide band gap semiconductor, typically a TiO2 nanoparticle network, sensitized with a visible light absorbing chromophore. Ru(II)-polypyridines are often utilized as chromophores thanks to their chemical stability, long-lived metal-to-ligand charge transfer (MLCT) excited states, tunable redox potentials, and near perfect quantum efficiency of interfacial electron transfer (IET) into TiO2. More recently, coordination compounds based on first row transition metals, such as Fe(II)-polypyridines, gained some attention as potential sensitizers in DSSCs due to their low cost and abundance. While such complexes can in principle sensitize TiO2, they do so very inefficiently since their photoactive MLCT states undergo intersystem crossing (ISC) into low-lying metal-centered states on a subpicosecond time scale. Competition between the ultrafast ISC events and IET upon initial excitation of Fe(II)-polypyridines is the main obstacle to their utilization in DSSCs. Suitability of Fe(II)-polypyridines to serve as sensitizers could therefore be improved by adjusting relative rates of the ISC and IET processes, with the goal of making the IET more competitive with ISC. Our research program in computational inorganic chemistry utilizes a variety of tools based on density functional theory (DFT), time-dependent density functional theory (TD-DFT) and quantum dynamics to investigate structure-property relationships in Fe(II)-polypyridines, specifically focusing on their function as chromophores. One of the difficult problems is the accurate determination of energy differences between electronic states with various spin multiplicities (i.e., (1)A, (1,3)MLCT, (3)T, (5)T) in the ISC cascade. We have shown that DFT is capable of predicting the trends in the energy ordering of these electronic states in a set of structurally related complexes with the help of appropriate benchmarks, based either on experimental data or higher-level ab initio calculations. Models based on TD-DFT and quantum dynamics approaches have proven very useful in understanding IET processes in Fe(II)-polypyridine-TiO2 assemblies. For example, they helped us to elucidate the origin of "band selective" sensitization in the [Fe(bpy-dca)2(CN)2]-TiO2 assembly (bpy-dca = 2,2'-bipyridine-4,4'-dicarboxylic acid), first observed by Ferrere and Gregg [ Ferrere , S. ; Gregg , B. A. J. Am. Chem. Soc. 1998 , 120 , 843 . ]. They also shed light on the relationship between the linker group that anchors Fe(II)-polypyridines onto the TiO2 surface and the speed of IET in Fe(II)-polypyridine-TiO2 assemblies. More interestingly, our results show that the IET efficiency is strongly correlated with the amount of electron density on the linker group and that one can obtain insights into the IET in dye-semiconductor assemblies based on ground state electronic structure calculations alone. This may be useful for quick screening of a large number of complexes for use as potential sensitizers in DSSCs, especially if followed up by TD-DFT and quantum dynamics simulations for selected target compounds to confirm efficient sensitization. While our focus over the past few years has been exclusively on Fe(II)-polypyridines, the computational strategies outlined in this Account are applicable to a wide variety of sensitizers.

Visualization of Hot Exciton Energy Relaxation from Coherent to Diffusive Regimes in Conjugated Polymers: A Theoretical Analysis

The unified coherent-to-diffusive energy relaxation of hot exciton in organic aggregates or polymers, which still remains largely unclear and is also a great challenge theoretically, is investigated from a time-dependent wavepacket diffusive approach. The results demonstrate that in the multiple time scale energy relaxation dynamics, the fast relaxation time essentially corresponds to the dephasing time of excitonic coherence motion, whereas the slow time is related to a hopping migration, and a suggested kinetic model successfully connects these two processes. The dependencies of those times on the initial energy and delocalization of exciton wavepacket as well as exciton-phonon interactions are further analyzed. The proposed method together with quantum chemistry calculations has explained an experimental observation of hot exciton energy relaxation in the low-bandgap copolymer PBDTTPD.

Interfacial Charge Transfer Anisotropy in Polycrystalline Lead Iodide Perovskite Films

Solar cells based on organic-inorganic lead iodide perovskite (CH3NH3PbI3) exhibit remarkably high power conversion efficiency (PCE). One of the key issues in solution-processed films is that often the polycrystalline domain orientation is not well-defined, which makes it difficult to predict energy alignment and charge transfer efficiency. Here we combine ab initio calculations and photoelectron spectroscopy to unravel the electronic structure and charge redistribution at the interface between different surfaces of CH3NH3PbI3 and typical organic hole acceptor Spiro-OMeTAD and electron acceptor PCBM. We find that both hole and electron interfacial transfer depend strongly on the CH3NH3PbI3 surface orientation: while the (001) and (110) surfaces tend to favor hole injection to Spiro-OMeTAD, the (100) surface facilitates electron transfer to PCBM due to surface delocalized charges and hole/electron accumulation at the CH3NH3PbI3/organic interfaces. Molecular dynamic simulations indicate that this is due to strong orbital interactions under thermal fluctuations at room temperature, suggesting the possibility to further improve charge separation and extraction in perovskite-based solar cells by controlling perovskite film crystallization and surface orientation.

Electronic properties of nickel-doped TiO₂ anatase

Atomistic details of electron transfer in semiconductor materials are characterized for TiO2 thin film surfaces doped with nickel. A periodic slab model of eight atomic layers exposes the (1 0 0) crystallographic surface and is covered with a monolayer of water. The density of states, absorption spectra, partial charge densities, molecular dynamics, and non-adiabatic couplings are compared between doped and undoped models. Our results show that Ni doping improves several electronic properties including lowering the band gap, increasing visible light absorption, and shortening the relaxation time of holes rather than electrons, which maximizes charge separation. The different mechanisms of electron and hole dynamics are discussed. The computed characteristics of a doped semiconductor material have practical potential for increasing efficiency of a photo-electrochemical cells.

Fabrication of Au/graphene-wrapped ZnO-nanoparticle-assembled hollow spheres with effective photoinduced charge transfer for photocatalysis

Heterostructures of gold-nanoparticle-decorated reduced-graphene-oxide (rGO)-wrapped ZnO hollow spheres (Au/rGO/ZnO) are synthesized using tetra-n-butylammonium bromide as a mediating agent. The structure of amorphous ZnO hollow spheres is found to be transformed from nanosheet- to nanoparticle-assembled hollow spheres (nPAHS) upon annealing at 500 °C. The ZnO nPAHS hybrids with Au/rGO are characterized using various techniques, including photoluminescence, steady-state absorbance, time-resolved photoluminescence, and photocatalysis. The charge-transfer time of ZnO nPAHS is found to be 87 ps, which is much shorter than that of a nanorod (128 ps), nanoparticle (150 ps), and nanowall (990 ps) due to its unique structure. The Au/rGO/ZnO hybrid shows a higher charge-transfer efficiency of 68.0% in comparison with rGO/ZnO (40.3%) and previously reported ZnO hybrids. The photocatalytic activities of the samples are evaluated by photodegrading methylene blue under black-light irradiation. The Au/rGO/ZnO exhibits excellent photocatalytic efficiency due to reduced electron-hole recombination, fast electron-transfer rate, and high charge-transfer efficiency.

Quantifying bulk and surface recombination processes in nanostructured water splitting photocatalysts via in situ ultrafast spectroscopy

A quantitative description of recombination processes in nanostructured semiconductor photocatalysts-one that distinguishes between bulk (charge transport) and surface (chemical reaction) losses-is critical for advancing solar-to-fuel technologies. Here we present an in situ experimental framework that determines the bias-dependent quantum yield for ultrafast carrier transport to the reactive interface. This is achieved by simultaneously measuring the electrical characteristics and the subpicosecond charge dynamics of a heterostructured photoanode in a working photoelectrochemical cell. Together with direct measurements of the overall incident-photon-to-current efficiency, we illustrate how subtle structural modifications that are not perceivable by conventional X-ray diffraction can drastically affect the overall photocatalytic quantum yield. We reveal how charge carrier recombination losses occurring on ultrafast time scales can limit the overall efficiency even in nanostructures with dimensions smaller than the minority carrier diffusion length. This is particularly true for materials with high carrier concentration, where losses as high as 37% are observed. Our methodology provides a means of evaluating the efficacy of multifunctional designs where high overall efficiency is achieved by maximizing surface transport yield to near unity and utilizing surface layers with enhanced activity.

Synthesis, spectral and third-order nonlinear optical properties of terpyridine Zn(II) complexes based on carbazole derivative with polyether group

Four novel Zn(II) terpyridine complexes (ZnLCl2, ZnLBr2, ZnLI2, ZnL(SCN)2) based on carbazole derivative group were designed, synthesized and fully characterized. Their photophysical properties including absorption and one-photon excited fluorescence, two-photon absorption (TPA) and optical power limiting (OPL) were further investigated systematically and interpreted on the basis of theoretical calculations (TD-DFT). The influences of different solvents on the absorption and One-Photon Excited Fluorescence (OPEF) spectral behavior, quantum yields and the lifetime of the chromophores have been investigated in detail. The third-order nonlinear optical (NLO) properties were investigated by open/closed aperture Z-scan measurements using femtosecond pulse laser in the range from 680 to 1080 nm. These results revealed that ZnLCl2 and ZnLBr2 exhibited strong two-photon absorption and ZnLCl2 showed superior optical power limiting property.

Influence of counter-anions during electrochemical deposition of ZnO on the charge transport dynamics in dye-sensitized solar cells

Porous ZnO/EosinY films have been electrochemically deposited by oxygen reduction in the presence of a zinc salt from EosinY-containing aqueous solutions, with either chloride or perchlorate as the counter anion. EosinY was removed and the films were sensitised by D149. These electrodes were used for dye-sensitised solar cells (DSCs), and charge transport in the porous network was studied by intensity modulated current/voltage spectroscopy (IMVS/IMPS) and electrochemical impedance spectroscopy (EIS) under illumination. Doping of ZnO during the electrodeposition could be proven by changes in the charge transport in ZnO and could be shown to occur when chloride was used as the counter ion. By using perchlorate as the counter ion, on the other hand, a more reproducible occupation of trap levels was obtained at, however, slightly lower voltages in DSCs whose origin is discussed in detail.

What Makes Hydroxamate a Promising Anchoring Group in Dye-Sensitized Solar Cells? Insights from Theoretical Investigation

We report, from a theoretical point of view, the first comparative study between the highly water-stable hydroxamate and the widely used carboxylate, in addition to the robust phosphate anchors. Theoretical calculations reveal that hydroxamate would be better for photoabsorption. A quantum dynamics description of the interfacial electron transfer (IET), including the underlying nuclear motion effect, is presented. We find that both hydroxamate and carboxylate would have efficient IET character; for phosphate the injection time is significantly longer (several hundred femtoseconds). We also verified that the symmetry of the geometry of the anchoring group plays important roles in the electronic charge delocalization. We conclude that hydroxamate can be a promising anchoring group, as compared to carboxylate and phosphate, due to its better photoabsorption and comparable IET time scale as well as the experimental advantage of water stability. We expect the implications of these findings to be relevant for the design of more efficient anchoring groups for dye-sensitized solar cell (DSSC) application.

Computational evaluation of optoelectronic properties for organic/carbon materials

CONSPECTUS: Organic optoelectronic materials are used in a variety of devices, including light-emitting diodes, field-effect transistors, photovoltaics, thermoelectrics, spintronics, and chemico- and biosensors. The processes that determine the intrinsic optoelectronic properties occur either in the photoexcited states or within the electron-pumped charged species, and computations that predict these optical and electrical properties would help researchers design new materials. In this Account, we describe recent advances in related density functional theory (DFT) methods and present case studies that examine the efficiency of light emission, carrier mobility, and thermoelectric figures of merit by calculation of the electron-vibration couplings. First we present a unified vibrational correlation function formalism to evaluate the excited-state radiative decay rate constant kr, the nonradiative decay rate constant knr, the intersystem crossing rate constant kISC, and the optical spectra. The molecular parameters that appear in the formalism, such as the electronic excited-state energy, vibrational modes, and vibronic couplings, require extensive DFT calculations. We used experiments for anthracene at both low and ambient temperatures to benchmark the calculated photophysical parameters. In the framework of Fermi's golden rule, we incorporated the non-adiabatic coupling and the spin-orbit coupling to evaluate the phosphorescence efficiency and emission spectrum. Both of these are in good agreement with experimental results for anthracene and iridium compounds. Band electron scattering and relaxation processes within Boltzmann theory can describe charge transport in two-dimensional carbon materials and closely packed organic solids. For simplicity, we considered only the acoustic phonon scattering as modeled by the deformation potential approximation coupled with extensive DFT calculations for band structures. We then related the carrier mobility to the band-edge shift associated with the lattice dilation of longitudinal waves. The calculated relaxation time was in good agreement with experimental data for the graphene sheet, which supports the methodology. We then found that the intrinsic electron mobility for a 6,6,12-graphyne sheet can be even larger than that of graphene. We extended this approach to investigate the thermoelectric transport of electrons in metal phthalocyanines, which showed reasonable Seebeck coefficients when compared with experiments. For the thermal lattice transport, we employed nonequilibrium molecular dynamics simulations. Combining both electron transport and lattice thermal conductivity, we can evaluate the thermoelectric figure of merit.

Photoinduced Ultrafast Heterogeneous Electron Transfer at Molecule-Semiconductor Interfaces

This Perspective discusses recent developments in ultrafast electron transfer dynamics at interfaces between organic and inorganic materials. Heterogeneous electron transfer (HET) is a key process in important fields like catalysis and solar energy conversion. Furthermore, the solid state nature of the systems gives control over relevant parameters and allows for investigating excited state dynamics and electron transfer processes in unprecedented detail. Progress in synthesis, sample preparation, and instrumentation makes it possible to provide experimental proof of recent prediction from theory concerning the adiabaticity of the reaction and the influence of coherence. A short recapitulation of the field is followed by a discussion of recent experimental efforts that allowed for studying HET, particularly focusing on the influence of energetics and vibrational dynamics.

Second-quantized surface hopping

The trajectory surface hopping method for quantum dynamics is reformulated in the space of many-particle states to include entanglement and correlation of trajectories. Used to describe many-body correlation effects in electronic structure theories, second quantization is applied to semiclassical trajectories. The new method allows coupling between individual trajectories via energy flow and common phase evolution. It captures the properties of a wave packet, such as branching, Heisenberg uncertainty, and decoherence. Applied to a superexchange process, the method shows very accurate results, comparable to exact quantum data and improving greatly on the standard approach.

Novel method for the fabrication of a charge-transfer complex crystal by photoirradiation

A novel method for the fabrication of a charge-transfer complex crystal was developed. Photoirradiation of a solution of TPP[Co(tbp)(CN)(2)] and TPP[Co(Pc)(CN)(2)] (tbp=tetrabenzoporphyrin, Pc=phthalocyanine, TPP=tetraphenylphosphonium) gave a molecular conducting crystal of a charge-transfer complex TPP[Co(tbp)(CN)(2)](2), which was produced by the process in which the photoexcited electron in tbp was transferred from the LUMO of tbp to that of Pc.

Excited State Dynamics of Ru10 Cluster Interfacing Anatase TiO2(101) Surface and Liquid Water

Charge transfer dynamics at the interface of supported metal nanocluster and liquid water by GGA+U calculations combined with density matrix formalism is considered. The Ru10 cluster introduces new states into the band gap of TiO2 surface, narrows the band gap of TiO2, and enhances the absorption strength. The H2O adsorption significantly enhances the intensity of photon absorption, which is due to the formation of Ti-O(water) and Ru-O(water) bonds at the interfaces. The Ru10 cluster promotes the dissociation of water, facilitates charge transfer, and increases the relaxation rates of holes and electrons. We expect that our results are helpful in understanding basic processes contributing to photoelectrochemical water splitting.

TiO2-coated mesoporous carbon: conventional vs. microwave-annealing process

The study of coating mesoporous carbon materials with titanium oxide nanoparticles is now becoming a promising and challenging area of research. To optimize the use of carbon materials in various applications, it is necessary to attach functional groups or other nanostructures to their surface. The combination of the distinctive properties of mesoporous carbon materials and titanium oxide is expected to be applied in field emission displays, nanoelectronic devices, novel catalysts, and polymer or ceramic reinforcement. But, their synthesis is still largely based on conventional techniques, such as wet impregnation followed by chemical reduction of the metal nanoparticle precursors, which takes time and money. The thermal heating based techniques are time consuming and often lack control of particle size and morphology. Hence, since there is a growing interest in microwave technology, an alternative way of power input into chemical reactions through dielectric heating is the use of microwaves. This work is focused on the advantages of microwave-assisted synthesis of TiO2-coated mesoporous carbon over conventional thermal heating method. The reviewed studies showed that the microwave-assisted synthesis of such composites allows processes to be completed within a shorter reaction time allowing the nanoparticles formation with superior properties than that obtained by conventional method.

Origin of high photocatalytic properties in the mixed-phase TiO2: a first-principles theoretical study

We present a step-by-step theoretical protocol based on the first-principles methods to reveal the insight into the origin of the high photocatalytic activity achieved by the mixed-phase TiO2, consisting of anatase and rutile. The interfacial geometries, density of states, charge densities, optical absorption spectrum, electrostatic potential, and band offsets have been calculated. The most stable mixed-phase structures have been identified, the interfacial tensile strain-dependent electronic structures have been observed, and the energy level diagram of band alignment has been given. We find that the geometrical reconstruction around the interfacial area has a negligible influence on the light absorption of the heterojunction and the interfacial sites seem not to dominantly contribute to the band-edge states. For the most stable heterojunction, the calculated valence-band maximum and conduction-band minimum of rutile, respectively, lie 0.52 and 0.22 eV above those of anatase, which agrees well with the experimental measurements and other theoretical predications. The good match of band energies to reaction requirements, large driving force for the charge immigration across the interface, and the difference of electrostatic potentials around the interface successfully explain the high photocatalytic activity achieved by the mixed-phase TiO2.

Charge Separation and Exciton Dynamics at Polymer/ZnO Interface from First-Principles Simulations

Charge separation and exciton dynamics play a crucial role in determining the performance of excitonic photovoltaics. Using time-dependent density functional theory with a range-separated exchange-correlation functional as well as nonadiabatic ab initio molecular dynamics, we have studied the formation and dynamics of charge-transfer (CT) excitons at polymer/ZnO interface. The interfacial atomic structure, exciton density of states and conversions between exciton species are examined from first-principles. The exciton dynamics exhibits both adiabatic and nonadiabatic characters. While the adiabatic transitions are facilitated by C═C vibrations along the polymer (P3HT) backbone, the nonadiabatic transitions are realized by exciton hopping between the excited states. We find that the localized ZnO surface states lead to localized low-energy CT states and poor charge separation. In contrast, the surface states of crystalline C60 are indistinguishable from the bulk states, resulting in delocalized CT states and efficient charge separation in polymer/fullerene (P3HT/PCBM) heterojunctions. The hot CT states are found to cool down in an ultrafast time scale and may not play a major role in charge separation of P3HT/ZnO. Finally we suggest that the dimensions of nanostructured acceptors can be tuned to obtain both efficient charge separation and high open circuit voltages.

Spatial location engineering of oxygen vacancies for optimized photocatalytic H2 evolution activity

Enhanced H2 evolution efficiency is achieved via manipulating the spatial location of oxygen vacancies in niobates. The ultrathin K4 Nb6O17 nanosheets which are rich in surface oxygen vacancies show enhanced optical absorption and band gap narrowing. Meanwhile, the fast charge separation effectively reduces the probability of hole-electron recombination, enabling 20 times hydrogen evolution rate compared with the defect-free bulk counterpart.