Synthesis of highly crystalline and monodisperse maghemite nanocrystallites without a size-selection process

Facile transformation of FeO/Fe3O4 core-shell nanocubes to Fe3O4 via magnetic stimulation

Here, we propose the use of magnetic hyperthermia as a means to trigger the oxidation of Fe1-xO/Fe3-δO4 core-shell nanocubes to Fe3-δO4 phase. As a first relevant consequence, the specific absorption rate (SAR) of the initial core-shell nanocubes doubles after exposure to 25 cycles of alternating magnetic field stimulation. The improved SAR value was attributed to a gradual transformation of the Fe1-xO core to Fe3-δO4, as evidenced by structural analysis including high resolution electron microscopy and Rietveld analysis of X-ray diffraction patterns. The magnetically oxidized nanocubes, having large and coherent Fe3-δO4 domains, reveal high saturation magnetization and behave superparamagnetically at room temperature. In comparison, the treatment of the same starting core-shell nanocubes by commonly used thermal annealing process renders a transformation to γ-Fe2O3. In contrast to other thermal annealing processes, the method here presented has the advantage of promoting the oxidation at a macroscopic temperature below 37 °C. Using this soft oxidation process, we demonstrate that biotin-functionalized core-shell nanocubes can undergo a mild self-oxidation transformation without losing their functional molecular binding activity.

High saturation magnetization of γ-Fe2O3 nano-particles by a facile one-step synthesis approach

We have demonstrated the synthesis of γ-Fe₂O₃ nano-particles through a facile and novel calcination process in the air. There is no pH regulation, gas atmosphere, additive, centrifugation or other complicated procedures during the preparing process. A detailed formation process of the nano-particles is proposed, and DMF as a polar solvent may slower the reaction process of calcination. The structures, morphologies, and magnetic properties of γ-Fe₂O₃ nano-particles were investigated systematically, and the pure γ-Fe₂O₃ nano-particles obtained at 200 °C display uniform morphology good magnetic property. The saturation magnetization of obtained pure γ-Fe₂O₃ is about 74 emu/g, which is comparable with bulk material (76 emu/g) and larger than other results. In addition, the photocatalytic activity for degradation of methylene blue is also studied, which shows proper photocatalytic activity.

Forming Nanoparticle Monolayers at Liquid-Air Interfaces by Using Miscible Liquids

One standard way of forming monolayers (MLs) of nanoparticles (NPs) is to drop-cast a NP dispersion made using one solvent onto a second, immiscible solvent; after this upper solvent evaporates, the NP ML can be transferred to a solid substrate by liftoff. We show that this previously universal use of only immiscible solvent pairs can be relaxed and close-packed, hexagonally ordered NP monolayers can self-assemble at liquid-air interfaces when some miscible solvent pairs are used instead. We demonstrate this by drop-casting an iron oxide NP dispersion in toluene on a dimethyl sulfoxide (DMSO) liquid substrate. The NPs are energetically stable at the DMSO surface and remain there even with solvent mixing. Excess NPs coagulate and precipitate in the DMSO, and this limits NPs at the surface to approximately 1 ML. The ML domains at the surface nucleate independently, which is in contrast to ML growth at the receding edge of the drying drop, as is common in immiscible solvent pair systems and seen here for the toluene/diethylene glycol immiscible solvent pair system. This new use of miscible solvent pairs can enable the formation of MLs for a wider range of NPs.

Zwitterionic ceramics for biomedical applications

Bioceramics for bone tissue regeneration, local drug delivery and nanomedicine, are receiving growing attention by the biomaterials scientific community. The design of bioceramics with improved surface properties able to overcome clinical issues is a great scientific challenge. Zwitterionization of surfaces has arisen as a powerful alternative in the design of biocompatible bioceramics capable to inhibit bacterial and non-specific protein adsorption, which opens up new insights into the biomedical applications of these materials. This manuscript reviews the different approaches reported up to date for the synthesis and characterization of zwitterionic bioceramics with potential clinical applications.

STATEMENT OF SIGNIFICANCE

Zwitterionic bioceramics are receiving growing attention by the biomaterials scientific community due to their great potential in bone tissue regeneration, local drug delivery and nanomedicines. Herein, the different strategies developed so far to synthesize and characterize zwitterionic bioceramics with potential clinical applications are summarized.

A simple procedure for the production of large ferromagnetic cobalt nanoparticles

Epsilon cobalt (ε-Co) nanoparticles in a number of octahedral morphologies have been synthesised. The particles are polycrystalline, with sizes in the order of 30 nm. Magnetic studies reveal the particles are ferromagnetic, with a room temperature saturation magnetisation of 131 emu g(-1). Unlike other large cubic ε-Co syntheses, we have not added an additional co-surfactant. Instead, we have modified the heating regime and reaction agitation. This alternative method highlights the complex chemistry associated with the formation of cobalt nanoparticles by thermal decomposition.

Tunability of Size and Magnetic Moment of Iron Oxide Nanoparticles Synthesized by Forced Hydrolysis

To utilize iron oxide nanoparticles in biomedical applications, a sufficient magnetic moment is crucial. Since this magnetic moment is directly proportional to the size of the superparamagnetic nanoparticles, synthesis methods of superparamagnetic iron oxide nanoparticles with tunable size are desirable. However, most existing protocols are plagued by several drawbacks. Presented here is a one-pot synthesis method resulting in monodisperse superparamagnetic iron oxide nanoparticles with a controllable size and magnetic moment using cost-effective reagents. The obtained nanoparticles were thoroughly characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD) and Fourier transform infrared (FT-IR) measurements. Furthermore, the influence of the size on the magnetic moment of the nanoparticles is analyzed by superconducting quantum interference device (SQUID) magnetometry. To emphasize the potential use in biomedical applications, magnetic heating experiments were performed.

Bioinspired synthesis of magnetite nanoparticles

Magnetite (Fe3O4) is a widespread magnetic iron oxide encountered in many biological and geological systems, and also in many technological applications. The magnetic properties of magnetite crystals depend strongly on the size and shape of its crystals. Hence, engineering magnetite nanoparticles with specific shapes and sizes allows tuning their properties to specific applications in a wide variety of fields, including catalysis, magnetic storage, targeted drug delivery, cancer diagnostics and magnetic resonance imaging (MRI). However, synthesis of magnetite with a specific size, shape and a narrow crystal size distribution is notoriously difficult without using high temperatures and non-aqueous media. Nevertheless, living organisms such as chitons and magnetotactic bacteria are able to form magnetite crystals with well controlled sizes and shapes under ambient conditions and in aqueous media. In these biomineralization processes the organisms use a twofold strategy to control magnetite formation: the mineral is formed from a poorly crystalline precursor phase, and nucleation and growth are controlled through the interaction of the mineral with biomolecular templates and additives. Taking inspiration from this biological strategy is a promising route to achieve control over the kinetics of magnetite crystallization under ambient conditions and in aqueous media. In this review we first summarize the main characteristics of magnetite and what is known about the mechanisms of magnetite biomineralization. We then describe the most common routes to synthesize magnetite and subsequently will introduce recent efforts in bioinspired magnetite synthesis. We describe how the use of poorly ordered, more soluble precursors such as ferrihydrite (FeH) or white rust (Fe(OH)2) can be employed to control the solution supersaturation, setting the conditions for continued growth. Further, we show how the use of various organic additives such as proteins, peptides and polymers allows for either the promotion or inhibition of magnetite nucleation and growth processes. At last we discuss how the formation of magnetite-based organic-inorganic hybrids leads to new functional nanomaterials.

Organic Phase Syntheses of Magnetic Nanoparticles and Their Applications

In the past two decades, the synthetic development of magnetic nanoparticles (NPs) has been intensively explored for both fundamental scientific research and technological applications. Different from the bulk magnet, magnetic NPs exhibit unique magnetism, which enables the tuning of their magnetism by systematic nanoscale engineering. In this review, we first briefly discuss the fundamental features of magnetic NPs. We then summarize the synthesis of various magnetic NPs, including magnetic metal, metallic alloy, metal oxide, and multifunctional NPs. We focus on the organic phase syntheses of magnetic NPs with precise control over their sizes, shapes, compositions, and structures. Finally we discuss the applications of various magnetic NPs in sensitive diagnostics and therapeutics, high-density magnetic data recording and energy storage, as well as in highly efficient catalysis.

Functionalized SPIONs: the surfactant nature modulates the self-assembly and cluster formation

SuperParamagnetic Iron Oxide Nanoparticles (SPIONs) represent a suitable system for several applications especially in nanomedicine. Great efforts have been made to design stable and biocompatible functionalized SPIONs suitable for diagnostics and drug delivery. In particular, zwitterionic-surfactant functionalized SPIONs, obtained through a coating strategy based on hydrophobic interaction, are promising systems for biomedical applications. The size of functionalized SPIONs has emerged as a crucial parameter determining their fate in living organisms. However, not all the proposed functionalization strategies lead to monodispersed systems and SPION clustering often occurs. In this study, we report a systematic investigation on different surfactant-functionalized SPIONs in order to explore the possibility of tuning the particle size by choosing an appropriate amphiphilic molecule. By combining Small-Angle Neutron Scattering (SANS) and Dynamic Light Scattering (DLS) analysis, we have provided a detailed description of the functionalized SPION structure. Furthermore, we have also related the surfactant aggregation properties, i.e. the Critical Micelle Concentration (CMC), to their efficiency in coating the SPION surface. A lack in the formation of a compact shell leads to a clusters formation. On this basis, the present study contributes to furnishing decisive information to define synthetic strategies able to tune functionalized-SPION design.

Importance of Molds for Nanoimprint Lithography: Hard, Soft, and Hybrid Molds

Nanoimprint lithography has attracted considerable attention in academic and industrial fields as one of the most prominent lithographic techniques for the fabrication of the nanoscale devices. Effectively controllable shapes of fabricated elements, extremely high resolution, and cost-effectiveness of this especial lithographic system have shown unlimited potential to be utilized for practical applications. In the past decade, many different lithographic techniques have been developed such as electron beam lithography, photolithography, and nanoimprint lithography. Among them, nanoimprint lithography has proven to have not only various advantages that other lithographic techniques have but also potential to minimize the limitations of current lithographic techniques. In this review, we summarize current lithography techniques and, furthermore, investigate the nanoimprint lithography in detail in particular focusing on the types of molds. Nanoimprint lithography can be categorized into three different techniques (hard-mold, soft-mold, and hybrid nanoimprint) depending upon the molds for imprint with different advantages and disadvantages. With numerous studies and improvements, nanoimprint lithography has shown great potential which maximizes its effectiveness in patterning by minimizing its limitations. This technique will surely be the next generation lithographic technique which will open the new paradigm for the patterning and fabrication in nanoscale devices in industry.

Cr(3+) substituted spinel ferrite nanoparticles with high coercivity

The low coercivity of spinel ferrites is a major barrier that significantly limits their use in high density magnetic recording applications. By controlling the substituting content of Cr(3+), in this article we describe how magnetic CoCr x Fe2-x O4 (0 < x < 1.2) nanoparticles with coercivity of up to 6.4 kOe were successfully obtained by the hydrothermal process. The high coercivity is attributed to the synergetic effects of magnetocrystalline anisotropy and the nanoscale size effect. X-ray diffraction analysis confirmed the spinel structure of the nanoparticles with transmission electron microscopy (TEM) suggesting regular tetragonal morphology. The TEM indicated an edge length ranging from 15 nm to 150 nm, which increases monotonically with increasing Cr content. Raman analyses supported the proposed model on the formation mechanism of the nanoparticles, i.e. heterogeneous and homogeneous nucleation.

Enhancing magnetoresistance in tetrathiafulvalene carboxylate modified iron oxide nanoparticle assemblies

We report a facile approach to stabilize Fe3O4 nanoparticles (NPs) by using tetrathiafulvalene carboxylate (TTF-COO(-)) and to control electron transport with an enhanced magnetoresistance (MR) effect in TTF-COO-Fe3O4 NP assemblies. This TTF-COO-coating is advantageous over other conventional organic coatings, making it possible to develop stable Fe3O4 NP arrays for sensitive spintronics applications.

Evaluation of High-Yield Purification Methods on Monodisperse PEG-Grafted Iron Oxide Nanoparticles

Fundamental research on nanoparticle (NP) interactions and development of next-generation biomedical NP applications relies on synthesis of monodisperse, functional, core-shell nanoparticles free of residual dispersants with truly homogeneous and controlled physical properties. Still, synthesis and purification of e.g. such superparamagnetic iron oxide NPs remain a challenge. Comparing the success of different methods is marred by the sensitivity of analysis methods to the purity of the product. We synthesize monodisperse, oleic acid (OA)-capped, Fe3O4 NPs in the superparamagnetic size range (3-10 nm). Ligand exchange of OA for poly(ethylene glycol) (PEG) was performed with the PEG irreversibly grafted to the NP surface by a nitrodopamine (NDA) anchor. Four different methods were investigated to remove excess ligands and residual OA: membrane centrifugation, dialysis, size exclusion chromatography, and precipitation combined with magnetic decantation. Infrared spectroscopy and thermogravimetric analysis were used to determine the purity of samples after each purification step. Importantly, only magnetic decantation yielded pure NPs at high yields with sufficient grafting density for biomedical applications (∼1 NDA-PEG(5 kDa)/nm(2), irrespective of size). The purified NPs withstand challenging tests such as temperature cycling in serum and long-term storage in biological buffers. Dynamic light scattering, transmission electron microscopy, and small-angle X-ray scattering show stability over at least 4 months also in serum. The successful synthesis and purification route is compatible with any conceivable functionalization for biomedical or biomaterial applications of PEGylated Fe3O4 NPs.

Tripod USPIONs with high aspect ratio show enhanced T2 relaxation and cytocompatibility

Aim: We synthesized ultra-small iron oxide nanoparticles (USPIONs) with tripod morphology and studied the effect of the aspect ratio (AR) of the tripod arms on mass magnetization, T2 relaxation and cytocompatibility in human cell lines. Materials & methods: Tripods were prepared by controlling the temperature during the thermal decomposition of Fe(CO)5, and their magnetic properties were characterized by superconducting quantum interference device, and NMR. Citric acid stabilized USPIONs were used to assess cytocompatibility. Results: T2 relaxivity of tripods showed dependency on AR of the tripod arm. Liver enzyme levels in presence of tripods were comparable to spherical USPIONs, and surprisingly tripods induced lower levels of reactive oxygen species. Conclusion: Tripod USPIONs with high AR arms possess excellent magnetic properties and cytocompatibility for further exploration as MRI contrast agents.

Fibrous scaffolds fabricated by emulsion electrospinning: from hosting capacity to in vivo biocompatibility

Electrospinning is a versatile method for preparing functional three-dimensional scaffolds. Synthetic and natural polymers have been used to produce micro- and nanofibers that mimic extracellular matrices. Here, we describe the use of emulsion electrospinning to prepare blended fibers capable of hosting aqueous species and releasing them in solution. The existence of an aqueous and a non-aqueous phase allows water-soluble molecules to be introduced without altering the structure and the degradation of the fibers, and means that their release properties under physiological conditions can be controlled. To demonstrate the loading capability and flexibility of the blend, various species were introduced, from magnetic nanoparticles and quantum rods to biological molecules. Cellular studies showed the spontaneous adhesion and alignment of cells along the fibers. Finally, in vivo experiments demonstrated the high biocompatibility and safety of the scaffolds up to 21 days post-implantation.

Synthesis and Characterization of AICAR and DOX Conjugated Multifunctional Nanoparticles as a Platform for Synergistic Inhibition of Cancer Cell Growth

The success of cancer treatment depends on the response to chemotherapeutic agents. However, malignancies often acquire resistance to drugs if they are used frequently. Combination therapy involving both a chemotherapeutic agent and molecularly targeted therapy may have the ability to retain and enhance therapeutic efficacy. Here, we addressed this issue by examining the efficacy of a novel therapeutic strategy that combines AICAR and DOX within a multifunctional platform. In this context, we reported the bottom-up synthesis of Fe3O4@SiO2(FITC)-FA/AICAR/DOX multifunctional nanoparticles aiming to neutralize survivin (BIRC5) to potentiate the efficacy of DOX against chemoresistance. The structure of nanoparticles was characterized by dynamic light scattering (DLS), zeta-potential measurement, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), and electron microscopy (SEM and STEM with EDX) techniques. Cellular uptake and cytotoxicity experiments demonstrated preferentially targeted delivery of nanoparticles and an efficient reduction of cancer cell viability in five different tumor-derived cell lines (A549, HCT-116, HeLa, Jurkat, and MIA PaCa-2). These results indicate that the multifunctional nanoparticle system possesses high inhibitory drug association and sustained cytotoxic effect with good biocompatibility. This novel approach which combines AICAR and DOX within a single platform might be promising as an antitumor treatment for cancer.

Ultrasmall inorganic nanoparticles: State-of-the-art and perspectives for biomedical applications

Ultrasmall nanoparticulate materials with core sizes in the 1-3nm range bridge the gap between single molecules and classical, larger-sized nanomaterials, not only in terms of spatial dimension, but also as regards physicochemical and pharmacokinetic properties. Due to these unique properties, ultrasmall nanoparticles appear to be promising materials for nanomedicinal applications. This review overviews the different synthetic methods of inorganic ultrasmall nanoparticles as well as their properties, characterization, surface modification and toxicity. We moreover summarize the current state of knowledge regarding pharmacokinetics, biodistribution and targeting of nanoscale materials. Aside from addressing the issue of biomolecular corona formation and elaborating on the interactions of ultrasmall nanoparticles with individual cells, we discuss the potential diagnostic, therapeutic and theranostic applications of ultrasmall nanoparticles in the emerging field of nanomedicine in the final part of this review.

Microwave-driven Synthesis of Iron Oxide Nanoparticles for Fast Detection of Atherosclerosis

A fast and reproducible microwave-driven protocol has been developed for the synthesis of neridronate-functionalized nanoparticles. Starting from the synthesis of hydrophobic nanoparticles, our method is based on an adaptation from thermal decomposition method to microwave driven synthesis. The new methodology produces a decrease in the reaction times in comparison with traditional procedures. Moreover, the use of the microwave technology increases the reproducibility of the reactions, something important from the point of view of clinical applications. The novelty of this iron oxide nanoparticle is the attachment of Neridronate. The use of this molecule leads a bisphosphonate moiety towards the outside of the nanoparticle that provides Ca2+ binding properties in vitro and selective accumulation in vivo in the atheroma plaque. The protocol allows the synthesis and plaque detection in about 3 hr since the initial synthesis from organic precursors. Their accumulation in the atherosclerotic area in less than 1 hr provides a contrast agent particularly suitable for clinical applications.

Engineered magnetic core shell nanoprobes: Synthesis and applications to cancer imaging and therapeutics

Magnetic core shell nanoparticles are composed of a highly magnetic core material surrounded by a thin shell of desired drug, polymer or metal oxide. These magnetic core shell nanoparticles have a wide range of applications in biomedical research, more specifically in tissue imaging, drug delivery and therapeutics. The present review discusses the up-to-date knowledge on the various procedures for synthesis of magnetic core shell nanoparticles along with their applications in cancer imaging, drug delivery and hyperthermia or cancer therapeutics. Literature in this area shows that magnetic core shell nanoparticle-based imaging, drug targeting and therapy through hyperthermia can potentially be a powerful tool for the advanced diagnosis and treatment of various cancers.

Dispersion of Hydrophobic Co Supracrystal in Aqueous Solution

Assembly of nanoparticles into supracrystals provides a class of materials with interesting optical and magnetic properties. However, supracrystals are mostly obtained from hydrophobic particles and therefore cannot be manipulated in aqueous systems, limiting their range of applications. Here, we show that hydrophobic-shaped supracrystals self-assembled from 8.2 nm cobalt nanoparticles can be dispersed in water by coating the supracrystals with lipid vesicles. A careful characterization of these composite objects provides insights into their structure at different length scales. This composite, suspended in water, retains the crystalline structure and paramagnetic properties of the starting material, which can be moved with an applied magnetic field.

Designed Assembly and Integration of Colloidal Nanocrystals for Device Applications

Colloidal nanocrystals have been intensively studied over the past three decades due to their unique properties that originate, in large part, from their nanometer-scale sizes. For applications in electronic and optoelectronic devices, colloidal nanoparticles are generally employed as assembled nanocrystal solids, rather than as individual particles. Consequently, tailoring 2D patterns as well as 3D architectures of assembled nanocrystals is critical for their various applications to micro- and nanoscale devices. Here, recent advances in the designed assembly, film fabrication, and printing/integration methods for colloidal nanocrystals are presented. The advantages and drawbacks of these methods are compared, and various device applications of assembled/integrated colloidal nanocrystal solids are discussed.

Advances in nanoscale alloys and intermetallics: low temperature solution chemistry synthesis and application in catalysis

Based on the bottom-up chemistry techniques, the size, shape, and composition controlled synthesis of nanoparticles can now be achieved uniformly, which is of great importance to the nanoscience community as well as in modern catalysis research. The low-temperature solution-phase synthesis approach represents one of the most attractive strategies and has been utilized to synthesize nanoscale metals, alloys and intermetallics, including a number of new metastable phases. This perspective will highlight the solution-based nanoparticle synthesis techniques, a low-temperature platform, for the synthesis of size and shape-tunable nanoscale transition metals, alloys, and intermetallics from the literature, keeping a focus on the utility of these nanomaterials in understanding the catalysis. For each solution-based nanoparticle synthesis technique, a comprehensive overview has been given for the reported nanoscale metals, alloys, and intermetallics, followed by critical comments. Finally, their enhanced catalytic activity and durability as novel catalysts have been discussed towards several hydrogenation/dehydrogenation reactions and also for different inorganic to organic reactions. Hence, the captivating advantages of this controllable low-temperature solution chemistry approach have several important implications and together with them this approach provides a promising route to the development of next-generation nanostructured metals, alloys, and intermetallics since they possess fascinating properties as well as outstanding catalytic activity.

Preparation of Magnetic Nanoparticles via a Chemically Induced Transition: Presence/Absence of Magnetic Transition on the Treatment Solution Used

The dependence of magnetic transition on the treatment solution used in the preparation of magnetic nanoparticles was investigated using as-prepared products from paramagnetic FeOOH/Mg(OH)2via a chemically induced transition. Treatment using FeCl3and CuCl solutions led to a product that showed no magnetic transition, whereas the product after treatment with FeSO4or FeCl2solutions showed ferromagnetism. Experiments revealed that the magnetism was caused by the ferrimagneticγ-Fe2O3phase in the nanoparticles, which had a coating of ferric compound. This observation suggests that Fe2+in the treatment solution underwent oxidation to Fe3+, thereby inducing the magnetic transition. The magnetic nanoparticles prepared via treatment with an FeSO4solution contained a larger amount of the nonmagnetic phase. This resulted in weaker magnetization even though these nanoparticles were larger than those prepared by treatment with an FeCl2solution. The magnetic transition of the precursor (FeOOH/Mg(OH)2) was dependent upon treatment solutions and was essentially induced by the oxidation of Fe2+and simultaneous dehydration of FeOOH phase. The transition was independent of the acid radical ions in the treatment solution, but the coating on the magnetic crystallites varied with changes in the acid radical ion.

Modeling the melting temperature of nanoscaled bimetallic alloys

T _m(x,D,d) of Pd_0.5Pt_0.5 nanocrystals versus D with different dimensions.

Magnetic Nanoparticles: Material Engineering and Emerging Applications in Lithography and Biomedicine

We present an interdisciplinary overview of material engineering and emerging applications of iron oxide nanoparticles. We discuss material engineering of nanoparticles in the broadest sense, emphasizing size and shape control, large-area self-assembly, composite/hybrid structures, and surface engineering. This is followed by a discussion of several non-traditional, emerging applications of iron oxide nanoparticles, including nanoparticle lithography, magnetic particle imaging, magnetic guided drug delivery, and positive contrast agents for magnetic resonance imaging. We conclude with a succinct discussion of the pharmacokinetics pathways of iron oxide nanoparticles in the human body -- an important and required practical consideration for any in vivo biomedical application, followed by a brief outlook of the field.

Progress on nanoparticle-based carbon nanotube complex: fabrication and potential application

Carbon nanotubes (CNTs) are considered as one of the most intensively explored nanostructured materials and have been widely used as a platform material for metal and semiconductor nanoparticles (NPs) due to their large and chemically active surface area. Several approaches have been described in the literature to immobilize NPs on the surface of CNTs. This report reviews the recent developments in this area by exploring the various techniques where nanotubes can be functionalized with NPs to improve the optical, mechanical, thermal, medical, electrical, and magnetic applications of CNTs.

Formation of colloidal nanocrystal clusters of iron oxide by controlled ligand stripping

We report a “ligand stripping” method for the creation of secondary structures of colloidal nanocrystals.

Monodisperse magnetite nanoparticles with nearly ideal saturation magnetization

We present a scalable thermolysis and high temperature oxidation procedure for synthesizing monodisperse magnetite nanoparticles with saturation magnetization of up to 80 emu g⁻¹ (412 kA m⁻¹), 92% of bulk magnetite.

Immune compatible cystine-functionalized superparamagnetic iron oxide nanoparticles as vascular contrast agents in ultrasonography

Superparamagnetic iron oxide nanoparticles (SPIONs) have been investigated for biomedical applications.

A facile strategy for synthesis of spinel ferrite nano-granules and their potential applications

A number of spinel ferrite nano-granules were synthesized in DMF through a calcination process under air.

A simple and versatile solvothermal configuration to synthesize superparamagnetic iron oxide nanoparticles using a coaxial microwave antenna

Magnetic iron oxide nanoparticles (IONs) with controllable physicochemical and magnetic properties were synthesized by a fast and simple solvothermal microwave (MW) assisted approach.

Synthesis of sub-100 nm biocompatible superparamagnetic Fe3O4 colloidal nanocrystal clusters as contrast agents for magnetic resonance imaging

Sub-100 nm Fe₃O₄ particles have been synthesized via a solvothermal method by using water as a size-control agent. They show superparamagnetism, high magnetization, prominent biocompatibility, and great promising for magnetic resonance imaging.

Structural isomers of iron(iii) N-methyl diethanolaminate as sol–gel precursors for iron-based oxide nanomaterials

New aminoalkoxides of Fe(iii) were synthesized, evaluated for different sol–gel parameters to stabilize nano-sized colloidal suspensions, and employed for the elaboration of magnetic Fe₂O₃ and BiFeO₃ NPs and thin films.

Simple synthesis of nitrogen doped graphene/ordered mesoporous metal oxides hybrid architecture as high-performance electrocatalysts for biosensing study

Construction of nitrogen doped graphene/ordered mesoporous metal oxides hybrid architecture for high-performance electrochemical biosensing study.

Surfactant-controlled composition and crystal structure of manganese(II) sulfide nanocrystals prepared by solvothermal synthesis

We investigated how the outcome of the solvothermal synthesis of manganese(II) sulfide (MnS) nanocrystals (NCs) is affected by the type and amount of long chain surfactant present in the reaction mixture. Prompted by a previous observation that a larger than stoichiometric amount of sulfur is required [Puglisi, A.; Mondini, S.; Cenedese, S.; Ferretti, A. M.; Santo, N.; Ponti A. Chem. Mater. 2010, 22, 2804-2813], we carried out a wide set of reactions using Mn(II) carboxylates and Mn2(CO)10 as precursors with varying amounts of sulfur and carboxylic acid. MnS NCs were obtained provided that the S/Mn ratio was larger than the L/Mn ratio, otherwise MnO NCs were produced. Since MnS can crystallize in three distinct phases (rock salt α-MnS, zincblende β-MnS, and wurtzite γ-MnS), we also investigated whether the surfactant affected the NC polymorphism. We found that MnS polymorphism can be controlled by appropriate selection of the surfactant. γ-MnS nanocrystals formed when a 1:2 mixture of long chain carboxylic acid and amine was used, irrespective of the presence of carboxylic acid as a free surfactant or ligand in the metal precursor. When we used a single surfactant (carboxylic acid, alcohol, thiol, amine), α-MnS nanocrystals were obtained. The peculiar role of the amine seems to be related to its basicity. The nanocrystals were characterized by TEM and electron diffraction; ATR-FTIR spectroscopy provided information about the surfactants adsorbed on the NCs.

Size-dependent surface effects in maghemite nanoparticles and its impact on interparticle interactions in dense assemblies

The question of the dominant interparticle magnetic interaction type in random closely packed assemblies of different diameter (6.2-11.5 nm) bare maghemite nanoparticles (NPs) is addressed. Single-particle magnetic properties such as particle anisotropy and exchange bias field are first of all studied in dilute (reference) systems of these same NPs, where interparticle interactions are neglible. Substantial surface spin disorder is revealed in all particles except the smallest, viz. for diameters d = 8-11.5 nm but not for d = 6.2-6.3 nm. X-ray diffraction analysis points to a crystallographic origin of this effect. The study of closely packed assemblies of the d ≥ 8 nm particles observes collective (superspin) freezing that clearly appears to be governed by interparticle dipole interactions. However, the dense assemblies of the smallest particles exhibit freezing temperatures that are higher than expected from a simple (dipole) extrapolation of the corresponding temperatures found in the d ≥ 8 nm assemblies. It is suggested that the nature of the dominant interparticle interaction in these smaller particle assemblies is superexchange, whereby the lack of significant surface spin disorder allows this mechanism to become important at the level of interacting superspins.

Hydrophilic Magnetochromatic Nanoparticles with Controllable Sizes and Super-high Magnetization for Visualization of Magnetic Field Intensity

Hydrophilic Fe3O4 nanoparticles with controllable size and shape have been fabricated using a facile solvothermal approach followed by surface modification with polyacrylic acid (PAA). The nanoparticles form one-dimension photonic crystal structure under external magnetic field ranging from 29.6 to 459 G. The reflection peaks of formed photonic crystals cover the entire visible spectrum, which indicates a good magnetochromatic property and prospect of wide applications. The size and shape of Fe3O4 nanoparticles are controlled by changing the ratio between ethylene glycol and diethylene glycol. In the process of surface modification, PAA synthesized by free radical polymerization was chemisorbed onto the surface of Fe3O4 particles with the aid of Fe(3+) cations, which renders the particles well dispersed in aqueous solution with high thermo-stability. The Fe3O4 particles exhibit ferrimagnetism with a high saturation magnetization value of 88.0 emu/g. Both the high magnetization and the wide reflection spectrum under magnetic field make the magnetochromatic nanoparticles a promising material for visualization of the distribution of magnetic field intensity on microfluidic chips.