Compound Copper Chalcogenide Nanocrystals

Cosensitized Quantum Dot Solar Cells with Conversion Efficiency over 12

The improvement of sunlight utilization is a fundamental approach for the construction of high-efficiency quantum-dot-based solar cells (QDSCs). To boost light harvesting, cosensitized photoanodes are fabricated in this work by a sequential deposition of presynthesized Zn-Cu-In-Se (ZCISe) and CdSe quantum dots (QDs) on mesoporous TiO₂ films via the control of the interactions between QDs and TiO₂ films using 3-mercaptopropionic acid bifunctional linkers. By the synergistic effect of ZCISe-alloyed QDs with a wide light absorption range and CdSe QDs with a high extinction coefficient, the incident photon-to-electron conversion efficiency is significantly improved over single QD-based QDSCs. It is found that the performance of cosensitized photoanodes can be optimized by adjusting the size of CdSe QDs introduced. In combination with titanium mesh supported mesoporous carbon as a counterelectrode and a modified polysulfide solution as an electrolyte, a champion power conversion efficiency up to 12.75% (V_oc = 0.752 V, J_sc = 27.39 mA cm^-2 , FF = 0.619) is achieved, which is, as far as it is known, the highest efficiency for liquid-junction QD-based solar cells reported.

Investigation into the Selenization Mechanisms of Wurtzite CZTS Nanorods

Here, we report the first detailed investigation into the selenization mechanism of thin films of wurtzite copper zinc tin sulfide (CZTS) nanorods (NRs), giving particular emphasis to the role of the long-chain organic ligands surrounding each NR. During selenization, the NRs undergo a selenium-mediated phase change from wurtzite to kesterite, concurrent with the replacement of sulfur with selenium in the lattice and in situ grain growth, along with the recrystallization of larger copper zinc tin selenide kesterite grains on top of the existing film. By utilizing a facile ligand removal technique, we demonstrate that the formation of a large-grain overlayer is achievable without the presence of ligands. In addition, we demonstrate an elegant ligand-exchange-based method for controlling the thickness of the fine-grain layer. This report emphasizes the key role played by ligands in determining the structural evolution of CZTS nanocrystal films during selenization, necessitating the identification of optimal ligand chemistries and processing conditions for desirable grain growth.

Luminescence and photoelectrochemical properties of size-selected aqueous copper-doped Ag-In-S quantum dots

Ternary luminescent copper and silver indium sulfide quantum dots (QDs) can be an attractive alternative to cadmium and lead chalcogenide QDs. The optical properties of Cu-In-S and Ag-In-S (AIS) QDs vary over a broad range depending on the QD composition and size. The implementation of ternary QDs as emitters in bio-sensing applications can be boosted by the development of mild and reproducible syntheses directly in aqueous solutions as well as the methods of shifting the photoluminescence (PL) bands of such QDs as far as possible into the near IR spectral range. In the present work, the copper-doping of aqueous non-stoichiometric AIS QDs was found to result in a red shift of the PL band maximum from around 630 nm to ∼780 nm and PL quenching. The deposition of a ZnS shell results in PL intensity recovery with the highest quantum yield of 15%, with almost not change in the PL band position, opposite to the undoped AIS QDs. Size-selective precipitation using 2-propanol as a non-solvent allows discrimination of up to 9 fractions of Cu-doped AIS/ZnS QDs with the average sizes in the fractions varying from around 3 to 2 nm and smaller and with reasonably the same composition irrespective of the QD size. The decrease of the average QD size results in a blue PL shift yielding a series of bright luminophors with the emission color varies from deep-red to bluish-green and the PL efficiency increases from 11% for the first fraction to up to 58% for the smallest Cu-doped AIS/ZnS QDs. The rate constant of the radiative recombination of the size-selected Cu-doped AIS/ZnS QDs revealed a steady growth with the QD size decrease as a result of the size-dependent enhancement of the spatial exciton confinement. The copper doping was found to result in an enhancement of the photoelectrochemical activity of CAIS/ZnS QDs introduced as spectral sensitizers of mesoporous titania photoanodes of liquid-junction solar cells.

Synthesis of Cisplatin(IV) Prodrug-Tethered CuFeS2 Nanoparticles in Tumor-Targeted Chemotherapy and Photothermal Therapy

In this study, for the first time, CuFeS₂ nanocrystals were successfully prepared through a facile noninjection-based synthetic strategy, by reacting Cu and Fe precursors with dodecanethiol in a 1-octadecene solvent. This one-pot noninjection strategy features easy handling, large-scale production, and high synthetic reproducibility. Following hyaluronic acid (HA) encapsulation, CuFeS₂ nanocrystals coated with HA (CuFeS₂@HA) not only readily dispersed in water and showed improved biocompatibility but also possessed a tumor-specific targeting ability of cancer cells bearing the cluster determinant 44 (CD44) receptors. The encapsulated CuFeS₂@HA showed broad optical absorbance from the visible to the near-infrared (NIR) region and high photothermal conversion efficiencies of about 74.2%. They can, therefore, be utilized for the photothermal ablation of cancer cells with NIR light irradiation. In addition, toxicity studies in vitro (B16F1 and HeLa) and in vivo (zebrafish embryos), as well as in vitro blood compatibility studies, indicated that CuFeS₂@HA show low cytotoxicity at the doses required for photothermal therapy. More importantly, CuFeS₂@HA can be used as delivery vehicles for chemotherapy cisplatin(IV) prodrug forming CuFeS₂@HA-Pt(IV). Their release profile revealed pH- and glutathione-mediated drug release from CuFeS₂@HA-Pt(IV), which may minimize the side effects of the drug to normal tissues during therapy. Subsequent in vitro experiments confirmed that the use of CuFeS₂@HA-Pt(IV) provides an enhanced and synergistic therapeutic effect compared to that from the use of either chemotherapy or photothermal therapy alone.

Localized Surface Plasmon Resonance in Semiconductor Nanocrystals

Localized surface plasmon resonance (LSPR) in semiconductor nanocrystals (NCs) that results in resonant absorption, scattering, and near field enhancement around the NC can be tuned across a wide optical spectral range from visible to far-infrared by synthetically varying doping level, and post synthetically via chemical oxidation and reduction, photochemical control, and electrochemical control. In this review, we will discuss the fundamental electromagnetic dynamics governing light matter interaction in plasmonic semiconductor NCs and the realization of various distinctive physical properties made possible by the advancement of colloidal synthesis routes to such NCs. Here, we will illustrate how free carrier dielectric properties are induced in various semiconductor materials including metal oxides, metal chalcogenides, metal nitrides, silicon, and other materials. We will highlight the applicability and limitations of the Drude model as applied to semiconductors considering the complex band structures and crystal structures that predominate and quantum effects that emerge at nonclassical sizes. We will also emphasize the impact of dopant hybridization with bands of the host lattice as well as the interplay of shape and crystal structure in determining the LSPR characteristics of semiconductor NCs. To illustrate the discussion regarding both physical and synthetic aspects of LSPR-active NCs, we will focus on metal oxides with substantial consideration also of copper chalcogenide NCs, with select examples drawn from the literature on other doped semiconductor materials. Furthermore, we will discuss the promise that LSPR in doped semiconductor NCs holds for a wide range of applications such as infrared spectroscopy, energy-saving technologies like smart windows and waste heat management, biomedical applications including therapy and imaging, and optical applications like two photon upconversion, enhanced luminesence, and infrared metasurfaces.

Optical Signatures of Impurity-Impurity Interactions in Copper Containing II-VI Alloy Semiconductors

We study the optical properties of copper containing II-VI alloy quantum dots (Cu_xZn_yCd_1-x-ySe). Copper mole fractions within the host are varied from 0.001 to 0.35. No impurity phases are observed over this composition range, and the formation of secondary phases of copper selenide are observed only at x_Cu > 0.45. The optical absorption and emission spectra of these materials are observed to be a strong function of x_Cu, and provide information regarding composition induced impurity-impurity interactions. In particular, the integrated cross section of optical absorption per copper atom changes sharply (from 1 × 10 ^-2 nm³ to 4 × 10 ^-2 nm³) at x_Cu = 0.12, suggesting a composition induced change in local electronic structure. These materials may serve as model systems to understand the electronic structure of I-III-VI₂ semiconductor compounds.

From Large-Scale Synthesis to Lighting Device Applications of Ternary I-III-VI Semiconductor Nanocrystals: Inspiring Greener Material Emitters

Quantum dots with fabulous size-dependent and color-tunable emissions remained as one of the most exciting inventories in nanomaterials for the last 3 decades. Even though a large number of such dot nanocrystals were developed, CdSe still remained as unbeatable and highly trusted lighting nanocrystals. Beyond these, the ternary I-III-VI family of nanocrystals emerged as the most widely accepted greener materials with efficient emissions tunable in visible as well as NIR spectral windows. These bring the high possibility of their implementation as lighting materials acceptable to the community and also to the environment. Keeping these in mind, in this Perspective, the latest developments of ternary I-III-VI nanocrystals from their large-scale synthesis to device applications are presented. Incorporating ZnS, tuning the composition, mixing with other nanocrystals, and doping with Mn ions, light-emitting devices of single color as well as for generating white light emissions are also discussed. In addition, the future prospects of these materials in lighting applications are also proposed.

Synthesis of Wurtzite Cu2ZnSnS4 Nanosheets with Exposed High-Energy (002) Facets for Fabrication of Efficient Pt-Free Solar Cell Counter Electrodes

Two-dimensional (2D) semiconducting nanomaterials have generated much interest both because of fundamental scientific interest and technological applications arising from the unique properties in two dimensions. However, the colloidal synthesis of 2D quaternary chalcogenide nanomaterials remains a great challenge owing to the lack of intrinsic driving force for its anisotropic growth. 2D wurtzite Cu₂ZnSnS₄ nanosheets (CZTS-NS) with high-energy (002) facets have been obtained for the first time via a simple one-pot thermal decomposition method. The CZTS-NS exhibits superior photoelectrochemical activity as compared to zero-dimensional CZTS nanospheres and comparable performance to Pt counter electrode for dye sensitized solar cells. The improved catalytic activity can be attributed to additional reactive catalytic sites and higher catalytic reactivity in high-energy (002) facets of 2D CZTS-NS. This is in accordance with the density functional theory (DFT) calculations, which indicates that the (002) facets of wurtzite CZTS-NS possess higher surface energy and exhibits remarkable reducibility for I₃^- ions. The developed synthetic method and findings will be helpful for the design and synthesis of 2D semiconducting nanomaterials, especially eco-friendly copper chalcogenide nanocrystals for energy harvesting and photoelectric applications.

Seebeck coefficients of regioregular poly(3-hexylthiophene) correlated with doping levels

Thermoelectric properties of regioregular poly(3-hexylthiophene) (P3HT) were investigated in correlation with doping level measured by a potential-step chronocoulometry (PSC) method. It was found that the log-log plot of Seebeck coefficients against doping levels showed a good linearity, whose slope value was around -1.

Rose-like CuS microflowers and their enhanced visible-light photocatalytic performance

Surfactant-free rose-like copper sulfide (CuS) microflowers were prepared by a simple one-pot solvothermal method in N,N-dimethylformamide (DMF).

On the growth morphology and crystallography of the epitaxial Cu7Te4/CdTe interface

The manipulation of interface structures in the epitaxial growth of thin films is very essential, especially for some special heterogeneous structures. Crystallographic calculation method is a powerful tool when analyzing and predicting the structures of the coherent interfaces.

Precursor-mediated synthesis of Cu2−xSe nanoparticles and their composites with TiO2 for improved photocatalysis

Simple, but effective. Successful isolation and characterization of an intermediate during the reaction of ^tBu₂Se with Cu(TFA)₂ establishes the route for the formation of copper selenide NPs and Cu_2−xSe–TiO₂ composites as active photocatalysts.

Insight into the crystal phase and shape evolution from monoclinic Cu1.94S to wurtzite Cu2ZnSnS4 nanocrystals

The Sn content greatly influences the morphology of CZTS NCs when using Cu_1.94S nanoplates as starting materials.

Selective formation of ternary Cu–Ge–S nanostructures in solution

Selective formation of ternary Cu–Ge–S nanostructures was achieved by manipulating the solvent environment, leading to either faceted Cu₈GeS₆ nanostructures or fragmented Cu₂GeS₃ nanocrystals.

Colloidal Synthesis and Thermoelectric Properties of CuFeSe₂ Nanocrystals

Copper-based chalcogenides that contain abundant, low-cost and environmentally-friendly elements, are excellent materials for numerous energy conversion applications, such as photocatalysis, photovoltaics, photoelectricity and thermoelectrics (TE). Here, we present a high-yield and upscalable colloidal synthesis route for the production of monodisperse ternary I-III-VI₂ chalcogenides nanocrystals (NCs), particularly stannite CuFeSe₂, with uniform shape and narrow size distributions by using selenium powder as the anion precursor and CuCl₂·2H₂O and FeCl₃ as the cationic precursors. The composition, the state of valence, size and morphology of the CuFeSe₂ materials were examined by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM), transmission electron microscope (TEM) and high resolution transmission electron microscope (HRTEM), respectively. Furthermore, the TE properties characterization of these dense nanomaterials compacted from monodisperse CuFeSe₂ NCs by hot press at 623 K were preliminarily studied after ligand removal by means of hydrazine and hexane solution. The TE performances of the sintered CuFeSe₂ pellets were characterized in the temperature range from room temperature to 653 K. Finally, the dimensionless TE figure of merit (ZT) of this Earth-abundant and intrinsic p-type CuFeSe₂ NCs is significantly increased to 0.22 at 653 K in this work, which is demonstrated to show a promising TE materialand makes it a possible p-type candidate for medium-temperature TE applications.

Facile solvothermal approach to pristine tetrahedrite nanostructures with unique multiply-voided morphology

Tetrahedrite (Cu₁₂Sb₄S₁₃) is a highly promising environmentally friendly material for energy conversion applications but its synthesis generally requires several days of heating at high temperature conditions. To fabricate tetrahedrite in a more rapid way and under milder conditions, solvothermal synthesis has been recently explored. However, a common problem faced when using this technique is the formation of significant amounts of other ternary Cu-Sb-S phases along with the desired tetrahedrite phase. Here, we present an optimized solvothermal procedure for synthesizing high-purity samples of tetrahedrite at moderate temperatures and reasonable heating times. The as-prepared samples are single-crystalline nanometer-sized structures having multiple voids or pores. By modifying certain experimental parameters such as the reaction temperature and heating time, we have shown that we can alter the nanocrystal architecture. The formation mechanism was investigated and it was found that these porous tetrahedrite nanostructures are a product of the non-classical oriented aggregation growth process. Porosity in nanomaterials is known to improve material properties and is desirable in many important applications so the construction of void-containing tetrahedrite nanostructures will potentially extend the utility of tetrahedrite to a wider range of applications. In this work, we explore its possible use as a photothermal-responsive drug delivery vehicle.

Self-Assembled Cu-Sn-S Nanotubes with High (De)Lithiation Performance

Through a gelation-solvothermal method without heteroadditives, Cu-Sn-S composites self-assemble to form nanotubes, sub-nanotubes, and nanoparticles. The nanotubes with a Cu_3-4SnS₄ core and Cu₂SnS₃ shell can tolerate long cycles of expansion/contraction upon lithiation/delithiation, retaining a charge capacity of 774 mAh g^-1 after 200 cycles with a high initial Coulombic efficiency of 82.5%. The importance of the Cu component for mitigation of the volume expansion and structural evolution upon lithiation is informed by density functional theory calculations. The self-generated template and calculated results can inspire the design of analogous Cu-M-S (M = metal) nanotubes for lithium batteries or other energy storage systems.

Switching between Plasmonic and Fluorescent Copper Sulfide Nanocrystals

Control over the doping density in copper sulfide nanocrystals is of great importance and determines its use in optoelectronic applications such as NIR optical switches and photovoltaic devices. Here, we demonstrate that we can reversibly control the hole carrier density (varying from >10²² cm^–3 to intrinsic) in copper sulfide nanocrystals by electrochemical methods. We can control the type of charge injection, i.e., capacitive charging or ion intercalation, via the choice of the charge compensating cation (e.g., ammonium salts vs Li⁺). Further, the type of intercalating ion determines whether the charge injection is fully reversible (for Li⁺) or leads to permanent changes in doping density (for Cu⁺). Using fully reversible lithium intercalation allows us to switch between thin films of covellite CuS NCs (E_g = 2.0 eV, hole density 10²² cm^–3, strong localized surface plasmon resonance) and low-chalcocite CuLiS NCs (E_g = 1.2 eV, intrinsic, no localized surface plasmon resonance), and back. Electrochemical Cu⁺ ion intercalation leads to a permanent phase transition to intrinsic low-chalcocite Cu₂S nanocrystals that display air stable fluorescence, centered around 1050 nm (fwhm ∼145 meV, PLQY ca. 1.8%), which is the first observation of narrow near-infrared fluorescence for copper sulfide nanocrystals. The dynamic control over the hole doping density and fluorescence of copper sulfide nanocrystals presented in this work and the ability to switch between plasmonic and fluorescent semiconductor nanocrystals might lead to their successful implementation into photovoltaic devices, NIR optical switches and smart windows.

Bottom-up engineering of thermoelectric nanomaterials and devices from solution-processed nanoparticle building blocks

Nanoparticle-based bottom-up engineered nanomaterials are extremely appealing for the direct solid-state conversion between heat and electricity.

Seed-mediated phase-selective growth of Cu2GeS3 hollow nanoparticles with huge cavities

Although significant progress has been achieved in the synthesis of hollow nanoparticles (NPs), research on copper-based multinary chalcogenide (CMC) semiconductor NPs with hollow structures is still less developed.