Functional surfaces of the human immunodeficiency virus type 1 capsid protein

Mutations in capsid major homology region affect assembly and membrane affinity of HIV-1 Gag

We introduced mutations into the HIV-1 major homology region (MHR; capsids 153-172) and adjacent C-terminal region to analyze their effects on virus-like particle (VLP) assembly, membrane affinity, and the multimerization of the Gag structural protein. Results indicate that alanine substitutions at K158, F168 or E175 significantly diminished VLP production. All assembly-defective Gag mutants had markedly reduced membrane-binding capacities, but results from a velocity sedimentation analysis suggest that most of the membrane-bound Gag proteins were present, primarily in a higher-order multimerized form. The membrane-binding capacity of the K158A, F168A, and E175A Gag proteins increased sharply upon removal of the MA globular domain. While demonstrating improved multimerization capability, the two MA-deleted versions of F168A and E175A did not show marked improvement in VLP production, presumably due to a defect in association with the raft-like membrane domain. However, K158A bound to detergent-resistant raft-like membrane; this was accompanied by noticeably improved VLP production following MA removal. Our results suggest that the HIV-1 MHR and adjacent downstream region facilitate multimerization and tight Gag packing. Enhanced Gag multimerization may help expose the membrane-binding domain and thus improve Gag membrane binding, thereby promoting Gag multimerization into higher-order assembly products.

Ty3 capsid mutations reveal early and late functions of the amino-terminal domain

The Ty3 retrotransposon assembles into 50-nm virus-like particles that occur in large intracellular clusters in the case of wild-type (wt) Ty3. Within these particles, maturation of the Gag3 and Gag3-Pol3 polyproteins by Ty3 protease produces the structural proteins capsid (CA), spacer, and nucleocapsid. Secondary and tertiary structure predictions showed that, like retroviral CA, Ty3 CA contains a large amount of helical structure arranged in amino-terminal and carboxyl-terminal bundles. Twenty-six mutants in which alanines were substituted for native residues were used to study CA subdomain functions. Transposition was measured, and particle morphogenesis and localization were characterized by analysis of protein processing, cDNA production, genomic RNA protection, and sedimentation and by fluorescence and electron microscopy. These measures defined five groups of mutants. Proteins from each group could be sedimented in a large complex. Mutations in the amino-terminal domain reduced the formation of fluorescent Ty3 protein foci. In at least one major homology region mutant, Ty3 protein concentrated in foci but no wt clusters of particles were observed. One mutation in the carboxyl-terminal domain shifted assembly from spherical particles to long filaments. Two mutants formed foci separate from P bodies, the proposed sites of assembly, and formed defective particles. P-body association was therefore found to be not necessary for assembly but correlated with the production of functional particles. One mutation in the amino terminus blocked transposition after cDNA synthesis. Our data suggest that Ty3 proteins are concentrated first, assembly associated with P bodies occurs, and particle morphogenesis concludes with a post-reverse transcription, CA-dependent step. Particle formation was generally resistant to localized substitutions, possibly indicating that multiple domains are involved.

The host protein Staufen1 participates in human immunodeficiency virus type 1 assembly in live cells by influencing pr55Gag multimerization

Human immunodeficiency virus type 1 (HIV-1) requires the sequential activities of virus-encoded proteins during replication. The activities of several host cell proteins and machineries are also critical to the completion of virus assembly and the release of infectious virus particles from cells. One of these proteins, the double-stranded RNA-binding protein Staufen1 (Stau1), selectively associates with the HIV-1 genomic RNA and the viral precursor Gag protein, pr55Gag. In this report, we tested whether Stau1 modulates pr55Gag assembly using a new and specific pr55Gag oligomerization assay based on bioluminescence resonance energy transfer (BRET) in both live cells and extracts after cell fractionation. Our results show that both the overexpression and knockdown of Stau1 increase the pr55Gag-pr55Gag BRET levels, suggesting a role for Stau1 in regulating pr55Gag oligomerization during assembly. This effect of Stau1 on pr55Gag oligomerization was observed only in membranes, a cellular compartment in which pr55Gag assembly primarily occurs. Consistently, expression of Stau1 harboring a vSrc myristylation signal led to a 6.5-fold enrichment of Stau1 in membranes and a corresponding enhancement in the Stau1-mediated effect on pr55Gag-pr55Gag BRET, demonstrating that Stau1 acts on assembly when targeted to membranes. A role for Stau1 in the formation of particles is further supported by the detection of membrane-associated detergent-resistant pr55Gag complexes and the increase of virus-like particle release when Stau1 expression levels are modulated. Our results indicate that Stau1 influences HIV-1 assembly by modulating pr55Gag-pr55Gag interactions, as shown in a live cell interaction assay. This likely occurs when Stau1 interacts with membrane-associated assembly intermediates.

Resistance of monocyte to HIV-1 infection is not due to uncoating defect

Freshly isolated blood monocytes show an early postentry block to in vitro HIV-1 infection. Differentiation into monocyte-derived macrophages (MDMs) is required to allow HIV replication in this cell type. In this study, we investigated whether the resistance of monocyte to HIV infection stemmed from uncoating defect. Monocyte and MDM lysates induced HIV-1 core uncoating to a comparable degree. This suggests that monocyte lacks a factor(s) essential for viral reverse transcription and/or contains a factor(s) interfering with this step.

Electron cryotomography of immature HIV-1 virions reveals the structure of the CA and SP1 Gag shells

The major structural elements of retroviruses are contained in a single polyprotein, Gag, which in human immunodeficiency virus type 1 (HIV-1) comprises the MA, CA, spacer peptide 1 (SP1), NC, SP2, and p6 polypeptides. In the immature HIV-1 virion, the domains of Gag are arranged radially with the N-terminal MA domain at the membrane and C-terminal NC-SP2-p6 region nearest to the center. Here, we report the three-dimensional structures of individual immature HIV-1 virions, as obtained by electron cryotomography. The concentric shells of the Gag polyprotein are clearly visible, and radial projections of the different Gag layers reveal patches of hexagonal order within the CA and SP1 shells. Averaging well-ordered unit cells leads to a model in which each CA hexamer is stabilized by a bundle of six SP1 helices. This model suggests why the SP1 spacer is essential for assembly of the Gag lattice and how cleavage between SP1 and CA acts as a structural switch controlling maturation.

Mutation in the loop C-terminal to the cyclophilin A binding site of HIV-1 capsid protein disrupts proper virus assembly and infectivity

We have studied the effects associated with two single amino acid substitution mutations in HIV-1 capsid (CA), the E98A and E187G. Both amino acids are well conserved among all major HIV-1 subtypes. HIV-1 infectivity is critically dependent on proper CA cone formation and mutations in CA are lethal when they inhibit CA assembly by destabilizing the intra and/or inter molecular CA contacts, which ultimately abrogate viral replication. Glu98, which is located on a surface of a flexible cyclophilin A binding loop is not involved in any intra-molecular contacts with other CA residues. In contrast, Glu187 has extensive intra-molecular contacts with eight other CA residues. Additionally, Glu187 has been shown to form a salt-bridge with Arg18 of another N-terminal CA monomer in a N-C dimer. However, despite proper virus release, glycoprotein incorporation and Gag processing, electron microscopy analysis revealed that, in contrast to the E187G mutant, only the E98A particles had aberrant core morphology that resulted in loss of infectivity.

Incorporation of human immunodeficiency virus type 1 reverse transcriptase into virus-like particles

We demonstrate that a genetically engineered human immunodeficiency virus type 1 (HIV-1) reverse transcriptase (RT) composed mainly of p66 or p51 subunits can be incorporated into virus-like particles (VLPs) when coexpressed with HIV-1 Pr55(gag). VLP-associated RT exhibited a detergent-resistant association with immature cores during sucrose gradient equilibrium centrifugation, suggesting that RT is incorporated into VLPs. However, RT that retains downstream integrase (IN) is severely inhibited in terms of incorporation into VLPs. Results from immunofluorescence tests reveal that RT-IN is primarily localized at the perinuclear area and exhibits poor colocalization with Gag. IN removal leads to a redistribution of RT throughout the cytoplasm and improved RT incorporation into VLPs. Similar results were observed for RT-IN in which alanine was substituted for 186-Lys-Arg-Lys-188 residues of the IN putative nuclear localization signal, suggesting that IN karyophilic properties may partly account for the inhibitory effect of IN on RT incorporation. Although the membrane-binding capacity of RT was markedly reduced compared to that of wild-type Gag or Gag-Pol, the correlation of membrane-binding ability with particle incorporation efficiency was incomplete. Furthermore, we observed that membrane-binding-defective myristylation-minus RT can be packaged into VLPs at the same level as its normal myristylated counterpart. This suggests that the incorporation of RT into VLPs is independent of membrane affinity but very dependent on RT-Gag interaction. Results from a genetic analysis suggest that the Gag-interacting regions of RT mainly reside in the thumb subdomain and that the RT-binding domains of Gag are located in the matrix (MA) and p6 regions.

Domain-swapped dimerization of the HIV-1 capsid C-terminal domain

Assembly of the HIV and other retroviruses is primarily driven by the oligomerization of the Gag polyprotein, the major viral structural protein capable of forming virus-like particles even in the absence of all other virally encoded components. Several critical determinants of Gag oligomerization are located in the C-terminal domain of the capsid protein (CA-CTD), which encompasses the most conserved segment in the highly variable Gag protein called the major homology region (MHR). The CA-CTD is thought to function as a dimerization module, although the existing model of CA-CTD dimerization does not readily explain why the conserved residues of the MHR are essential for retroviral assembly. Here we describe an x-ray structure of a distinct domain-swapped variant of the HIV-1 CA-CTD dimer stabilized by a single amino acid deletion. In the domain-swapped structure, the MHR-containing segment forms a major part of the dimerization interface, providing a structural mechanism for the enigmatic function of the MHR in HIV assembly. Our observations suggest that swapping of the MHR segments of adjacent Gag molecules may be a critical intermediate in retroviral assembly.

Genetic Studies of the beta-hairpin loop of Rous sarcoma virus capsid protein

The first few residues of the Rous sarcoma virus (RSV) CA protein comprise a structurally dynamic region that forms part of a Gag-Gag interface in immature virus particles. Dissociation of this interaction during maturation allows refolding and formation of a beta-hairpin structure important for assembly of CA monomers into the mature capsid shell. A consensus binding site for the cellular Ubc9 protein was previously identified within this region, suggesting that binding of Ubc9 and subsequent small ubiquitin-like modifier protein 1 (SUMO-1) modification of CA may play a role either in regulating the assembly activity of CA in immature particles or mature cores or in controlling postentry function(s) during the establishment of infection. In the present study, mutations designed to eliminate the consensus binding site were used to dissect the potentially overlapping functions of these residues. The resulting replication defects could not be traced to a failure to form particles of normal composition but, rather, to a deficit in genome replication. Genetic suppressors of two detrimental beta-hairpin mutations improved infectivity without restoring the consensus site or creating a novel one elsewhere. Optimal restoration of infectivity to a Lys-to-Arg mutant required a combination of secondary changes, one on the surface of each domain of CA. Rather than arguing for a critical role of Ubc9 and SUMO in RSV replication, these findings provide strong support for a structural role of the N-terminal residues and a particularly striking example of long-range interactions between regions of CA in achieving a functional core competent for genome replication.

A mutation in alpha helix 3 of CA renders human immunodeficiency virus type 1 cyclosporin A resistant and dependent: rescue by a second-site substitution in a distal region of CA

The replication of many isolates of human immunodeficiency virus type 1 (HIV-1) is enhanced by binding of the host cell protein cyclophilin A (CypA) to the viral capsid protein (CA). The immunosuppressive drug cyclosporine A (CsA) and its nonimmunosuppressive analogs bind with high affinity to CypA and inhibit HIV-1 replication. Previous studies have identified two mutations, A92E and G94D, in the CypA-binding loop of CA that confer the ability of HIV-1 to replicate in the presence of CsA. Interestingly, CsA stimulates the replication of HIV-1 mutants containing either the A92E or G94D substitution in some human cell lines. Here, we show that substitution of alanine for threonine at position 54 of CA (T54A) also confers HIV-1 resistance to and dependence on CsA. Like the previously identified CsA-resistant/dependent mutants, infection by the T54A mutant was stimulated by CsA in a target cell-specific manner. RNA interference-mediated reduction of CypA expression enhanced the permissiveness of HeLa cells to infection by the T54A mutant. A suppressor mutation, encoding a substitution of threonine for alanine at position 105 of CA (A105T), was identified through adaptation of the T54A mutant virus for growth in CEM cells. A105T rescued the impaired single-cycle infectivity and replication defects of both T54A and A92E mutants. These results indicate that CA determinants outside the CypA-binding loop can modulate the dependence of HIV-1 infection on CypA.

Optimizing scaleup yield for protein production: Computationally Optimized DNA Assembly (CODA) and Translation Engineering™

Translation Engineering combined with synthetic biology (gene synthesis) techniques makes it possible to deliberately alter the presumed translation kinetics of genes without altering the amino acid sequence. Here, we describe proprietary technologies that design and assemble synthetic genes for high expression and enhanced protein production, and offers new insights and methodologies for affecting protein structure and function. We have patented Translation Engineering technologies to manage the complexity of gene design to account for codon pair usage, translational pausing signals, RNA secondary structure and user-defined sequences such as restriction sites. Failure to optimize for codon pair-encoded translation pauses often results in the relatively common occurrence of a slowly translated codon pair that slows the rate of protein elongation and decreases total protein production. Translation Engineering technology improves heterologous expression by tuning the gene sequence for translation in any well-characterized host, including cell-free expression techniques characterized by "broken"Escherichia coli systems used in kits for today's molecular tools market. In addition, we have patented a novel gene assembly method (Computationally Optimized DNA Assembly; CODA) that uses the degeneracy of the genetic code to design oligonucleotides with thermodynamic properties for self-assembly into a single, linear DNA product. Fast translational kinetics and robust protein expression are optimized in synthetic "Hot Rod" genes that are guaranteed to express in E. coli at high levels. These genes are optimized for codon usage and other properties known to aid protein expression, and importantly, they are engineered to be devoid of mRNA secondary structures that might impede transcription, and over-represented codon pairs that might impede translation. Hot Rod genes allow translating ribosomes and E. coli RNA polymerases to maintain coupled translation and transcription at maximal rates. As a result, the nascent mRNA is produced at a high level and is sequestered in polysomes where it is protected from degradation, even further enhancing protein production. In this review we demonstrate that codon context can profoundly influence translation kinetics, and that over-represented codon pairs are often present at protein domain boundaries and appear to control independent protein folding in several popular expression systems. Finally, we consider that over-represented codon pairs (pause sites) may be essential to solving problems of protein expression, solubility, folding and activity encountered when genes are introduced into heterologous expression systems, where the specific set of codon pairs controlling ribosome pausing are different. Thus, Translation Engineering combined with synthetic biology (gene synthesis) techniques may allow us to manipulate the translation kinetics of genes to restore or enhance function in a variety of traditional and novel expression systems.

Capsid is an important determinant for functional complementation of murine leukemia virus and spleen necrosis virus Gag proteins

In this report, we examined the abilities and requirements of heterologous Gag proteins to functionally complement each other to support viral replication. Two distantly related gammaretroviruses, murine leukemia virus (MLV) and spleen necrosis virus (SNV), were used as a model system because SNV proteins can support MLV vector replication. Using chimeric or mutant Gag proteins that could not efficiently support MLV vector replication, we determined that a homologous capsid (CA) domain was necessary for the functional complementation of MLV and SNV Gag proteins. Findings from the bimolecular fluorescence complementation assay revealed that MLV and SNV Gag proteins were capable of colocalizing and interacting in cells. Taken together, our results indicated that MLV and SNV Gag proteins can interact in cells; however, a homologous CA domain is needed for functional complementation of MLV and SNV Gag proteins to complete virus replication. This requirement of homologous Gag most likely occurs at a postassembly step(s) of the viral replication.

Interactions between HIV-1 Gag molecules in solution: an inositol phosphate-mediated switch

Retrovirus particle assembly is mediated by the Gag protein. Gag is a multi-domain protein containing discrete domains connected by flexible linkers. When recombinant HIV-1 Gag protein (lacking myristate at its N terminus and the p6 domain at its C terminus) is mixed with nucleic acid, it assembles into virus-like particles (VLPs) in a fully defined system in vitro. However, this assembly is defective in that the radius of curvature of the VLPs is far smaller than that of authentic immature virions. This defect can be corrected to varying degrees by addition of inositol phosphates to the assembly reaction. We have now explored the binding of inositol hexakisphosphate (IP6) to Gag and its effects upon the interactions between Gag protein molecules in solution. Our data indicate that basic regions at both ends of the protein contribute to IP6 binding. Gag is in monomer-dimer equilibrium in solution, and mutation of the previously described dimer interface within its capsid domain drastically reduces Gag dimerization. In contrast, when IP6 is added, Gag is in monomer-trimer rather than monomer-dimer equilibrium. The Gag protein with a mutation at the dimer interface also remains almost exclusively monomeric in IP6; thus the "dimer interface" is essential for the trimeric interaction in IP6. We discuss possible explanations for these results, including a change in conformation within the capsid domain induced by the binding of IP6 to other domains within the protein. The participation of both ends of Gag in IP6 interaction suggests that Gag is folded over in solution, with its ends near each other in three-dimensional space; direct support for this conclusion is provided in a companion manuscript. As Gag is an extended rod in immature virions, this apparent proximity of the ends in solution implies that it undergoes a major conformational change during particle assembly.

Conformation of the HIV-1 Gag protein in solution

A single multi-domain viral protein, termed Gag, is sufficient for assembly of retrovirus-like particles in mammalian cells. We have purified the human immunodeficiency virus type 1 (HIV-1) Gag protein (lacking myristate at its N terminus and the p6 domain at its C terminus) from bacteria. This protein is capable of assembly into virus-like particles in a defined in vitro system. We have reported that it is in monomer-dimer equilibrium in solution, and have described a mutant Gag protein that remains monomeric at high concentrations in solution. We report that the mutant protein retains several properties of wild-type Gag. This mutant enabled us to analyze solutions of monomeric protein. Hydrodynamic studies on the mutant protein showed that it is highly asymmetric, with a frictional ratio of 1.66. Small-angle neutron scattering (SANS) experiments confirmed its asymmetry and yielded an R(g) value of 34 A. Atomic-level structures of individual domains within Gag have previously been determined, but these domains are connected in Gag by flexible linkers. We constructed a series of models of the mutant Gag protein based on these domain structures, and tested each model computationally for its agreement with the experimental hydrodynamic and SANS data. The only models consistent with the data were those in which Gag was folded over, with its N-terminal matrix domain near its C-terminal nucleocapsid domain in three-dimensional space. Since Gag is a rod-shaped molecule in the assembled immature virion, these findings imply that Gag undergoes a major conformational change upon virus assembly.

A second-site suppressor significantly improves the defective phenotype imposed by mutation of an aromatic residue in the N-terminal domain of the HIV-1 capsid protein

The HIV-1 capsid (CA) protein plays an important role in virus assembly and infectivity. Previously, we showed that Ala substitutions in the N-terminal residues Trp23 and Phe40 cause a severely defective phenotype. In searching for mutations at these positions that result in a non-lethal phenotype, we identified one candidate, W23F. Mutant virions contained aberrant cores, but unlike W23A, also displayed some infectivity in a single-round replication assay and delayed replication kinetics in MT-4 cells. Following long-term passage in MT-4 cells, two second-site mutations were isolated. In particular, the W23F/V26I mutation partially restored the wild-type phenotype, including production of particles with conical cores and wild-type replication kinetics in MT-4 cells. A structural model is proposed to explain the suppressor phenotype. These findings describe a novel occurrence, namely suppression of a mutation in a hydrophobic residue that is critical for maintaining the structural integrity of CA and proper core assembly.

Mutation of dileucine-like motifs in the human immunodeficiency virus type 1 capsid disrupts virus assembly, gag-gag interactions, gag-membrane binding, and virion maturation

The human immunodeficiency virus type 1 (HIV-1) Gag precursor protein Pr55(Gag) drives the assembly and release of virus-like particles in the infected cell. The capsid (CA) domain of Gag plays an important role in these processes by promoting Gag-Gag interactions during assembly. The C-terminal domain (CTD) of CA contains two dileucine-like motifs (L189/L190 and I201/L202) implicated in regulating the localization of Gag to multivesicular bodies (MVBs). These dileucine-like motifs are located in the vicinity of the CTD dimer interface, a region of CA critical for Gag-Gag interactions during virus assembly and CA-CA interactions during core formation. To study the importance of the CA dileucine-like motifs in various aspects of HIV-1 replication, we introduced a series of mutations into these motifs in the context of a full-length, infectious HIV-1 molecular clone. CA mutants LL189,190AA and IL201,202AA were both severely impaired in virus particle production because of a variety of defects in the binding of Gag to membrane, Gag multimerization, and CA folding. In contrast to the model suggesting that the CA dileucine-like motifs regulate MVB targeting, the IL201,202AA mutation did not alter Gag localization to the MVB in either HeLa cells or macrophages. Revertants of single-amino-acid substitution mutants were obtained that no longer contained dileucine-like motifs but were nevertheless fully replication competent. The varied phenotypes of the mutants reported here provide novel insights into the interplay among Gag multimerization, membrane binding, virus assembly, CA dimerization, particle maturation, and virion infectivity.

Irreversible growth model for virus capsid assembly

We model the spontaneous assembly of a capsid (a virus' closed outer shell) from many copies of identical units, using entirely irreversible steps and only information local to the growing edge. Our model is formulated in terms of (i) an elastic Hamiltonian with stretching and bending stiffness and a spontaneous curvature, and (ii) a set of rate constants for the addition of new units or bonds. An ensemble of highly irregular capsids is generated, unlike the well-known icosahedrally symmetric viruses, but (we argue) plausible as a way to model the irregular capsids of retroviruses such as HIV. We found that (i) the probability of successful capsid completion decays exponentially with capsid size; (ii) capsid size depends strongly on spontaneous curvature and weakly on the ratio of the bending and stretching elastic stiffnesses of the shell; (iii) the degree of localization of Gaussian curvature (a measure of facetedness) depends heavily on the ratio of elastic stiffnesses.

Distinct roles for nucleic acid in in vitro assembly of purified Mason-Pfizer monkey virus CANC proteins

In contrast to other retroviruses, Mason-Pfizer monkey virus (M-PMV) assembles immature capsids in the cytoplasm. We have compared the ability of minimal assembly-competent domains from M-PMV and human immunodeficiency virus type 1 (HIV-1) to assemble in vitro into virus-like particles in the presence and absence of nucleic acids. A fusion protein comprised of the capsid and nucleocapsid domains of Gag (CANC) and its N-terminally modified mutant (DeltaProCANC) were used to mimic the assembly of the viral core and immature particles, respectively. In contrast to HIV-1, where CANC assembled efficiently into cylindrical structures, the same domains of M-PMV were assembly incompetent. The addition of RNA or oligonucleotides did not complement this defect. In contrast, the M-PMV DeltaProCANC molecule was able to assemble into spherical particles, while that of HIV-1 formed both spheres and cylinders. For M-PMV, the addition of purified RNA increased the efficiency with which DeltaProCANC formed spherical particles both in terms of the overall amount and the numbers of completed spheres. The amount of RNA incorporated was determined, and for both rRNA and MS2-RNA, quantities similar to that of genomic RNA were encapsidated. Oligonucleotides also stimulated assembly; however, they were incorporated into DeltaProCANC spherical particles in trace amounts that could not serve as a stoichiometric structural component for assembly. Thus, oligonucleotides may, through a transient interaction, induce conformational changes that facilitate assembly, while longer RNAs appear to facilitate the complete assembly of spherical particles.

3-O-(3',3'-dimethysuccinyl) betulinic acid inhibits maturation of the human immunodeficiency virus type 1 Gag precursor assembled in vitro

3-O-(3',3'-Dimethysuccinyl) betulinic acid (PA-457) has been shown to potently inhibit human immunodeficiency virus (HIV) replication in culture. In contrast to inhibitors that act upon the viral proteinase, PA-457 appears to block only the final maturational cleavage of p25CA-p2 to p24CA. However, attempts to replicate this effect in vitro using recombinant Gag have failed, leading to the hypothesis that activity is dependent upon the assembly state of Gag. Using a synthesis/assembly system for chimeric HIV type 1 Gag proteins, we have replicated the activity of PA-457 in vitro. The processing of assembled chimeric Gag can be inhibited by the addition of drug with only the final cleavage of p25CA-p2 to p24CA blocked. Consistent with our hypothesis and with previous findings, inhibition appears specific to Gag assembled into an immature capsid-like structure, since synthetic Gag that remains unassembled is properly processed in the presence of the compound. To further analyze the authenticity of the assay, PA-457 was tested in parallel with its inactive parental compound, betulinic acid. Betulinic acid had no effect upon p25 processing in this system. Analysis of a PA-457-resistant mutant, A1V, in this system pointed to more rapid cleavage as a possible mechanism for resistance. However, characterization of additional mutations at the cleavage site and in p2 suggests that resistance does not strictly correlate with the rate of cleavage. With the establishment of an in vitro assay for the detection of PA-457 activity, a more detailed characterization of its mechanism of action will be possible.

Mutations in the alpha-helix directly C-terminal to the major homology region of human immunodeficiency virus type 1 capsid protein disrupt Gag multimerization and markedly impair virus particle production

The X-ray crystallographic structure of HIV-1 capsid protein suggests that the dimer interface of the dimerization domain is mainly formed from a putative alpha-helix structure of 14 amino acids (Gag residues 311-324) and lies directly C-terminal to the capsid major homology region. We found that a deletion mutation in the alpha-helix drastically reduces virus particle production. Alanine-scanning mutagenetic analysis indicated that substitution mutations at residues Q311, V313, K314, W316, and M317 all impair virus particle production markedly. Membrane flotation assays suggested that some mutations in the dimer interface have slight effects on the efficient binding of Gag to membranes. Indirect immunofluorescence studies revealed that mutants defective in virus production exhibit a subcellular distribution pattern similar to that of wild-type. However, velocity sedimentation analysis showed that mutations significantly impairing virus particle production were also detrimental to Gag multimerization, suggesting that the impaired virus production may be due to a defect in Gag multimerization. These results support the proposal that residues in the capsid dimer interface play a crucial role in promoting Gag multimerization, possibly by facilitating stable Gag-Gag interactions.

In vitro characterization of the interaction between HIV-1 Gag and human lysyl-tRNA synthetase

Human immunodeficiency virus type 1 (HIV-1) viral assembly is mediated by multiple protein-protein and protein-nucleic acid interactions. Human tRNA(Lys3) is used as the primer for HIV reverse transcription, and HIV Gag and GagPol are required for packaging of the tRNA into virions. Human lysyl-tRNA synthetase (LysRS) is also specifically packaged into HIV, suggesting a role for LysRS in tRNA packaging. Gag alone is sufficient for packaging of LysRS, and these two proteins have been shown to interact in vitro using glutathione S-transferase pull-down assays. In vitro pull-down assays using truncated constructs have also revealed that residues important for homodimerization of Gag and LysRS are critical for the Gag/LysRS interaction. In this work, we report further in vitro characterization of the interaction between HIV Gag and human LysRS using affinity pull-down assays, fluorescence anisotropy measurements and gel chromatography. An equilibrium binding constant of 310 +/- 80 nM was measured for the Gag/LysRS interaction. We also show that capsid alone binds to LysRS with a similar affinity as full-length Gag. Point mutations that disrupt the homodimerization of LysRS and Gag in vitro do not affect their interaction. These results suggest that dimerization of each protein per se is not required for the interaction but that residues involved in forming the homodimer interfaces contribute to heterodimer formation. Gel chromatography studies further support the formation of a Gag/LysRS heterodimer.

Evidence for a functional link between uncoating of the human immunodeficiency virus type 1 core and nuclear import of the viral preintegration complex

Human immunodeficiency virus type 1 (HIV-1) particles begin their replication upon fusion with the plasma membrane of target cells and release of the viral core into the host cell cytoplasm. Soon thereafter, the viral capsid, which is composed of a polymer of the CA protein, disassociates from the internal ribonucleoprotein complex. While this disassembly process remains poorly understood, the available evidence indicates that proper uncoating of the core is a key step in infection. Defects in uncoating most often lead to a failure of the virus to undergo reverse transcription, resulting in an inability to form a functional viral preintegration complex (PIC). In a previous study, we reported that an HIV-1 mutant containing two substitutions in CA (Q63A/67A) was unusual in that it was poorly infectious yet synthesized normal levels of viral DNA. Here we report that this mutant is impaired for nuclear entry. Quantitative analysis of viral DNA synthesis from infected cells by Southern blotting and real-time PCR revealed that the Q63A/Q67A mutant is impaired in the synthesis of one-long terminal repeat (1-LTR) and 2-LTR circles. Isolation of PICs from acutely infected cells revealed that the Q63A/Q67A mutant produces protein-DNA complexes similar to wild-type in yield and overall composition, but these PICs contained elevated levels of CA and were impaired for integration in vitro. These results demonstrate that mutations in CA can have deleterious effects on both nuclear targeting and integration, suggesting that these steps in the HIV-1 life cycle are dependent on proper uncoating of the viral core.

Saturation of TRIM5 alpha-mediated restriction of HIV-1 infection depends on the stability of the incoming viral capsid

HIV-1 infection is restricted at a post-entry stage in some simian cell lines by species-specific variants of TRIM5 alpha. Restriction targets the viral capsid protein (CA) and results in attenuated reverse transcription. TRIM5 alpha restriction can be inhibited by the addition of noninfectious virus-like particles (VLPs), thus rendering cells permissive for infection by an HIV-1 reporter virus. Through the use of HIV-1 VLPs containing Gag cleavage site substitutions and point mutations in CA which alter the stability of the viral capsid, we demonstrate that saturation of TRIM5 alpha restriction depends on the stability of the capsid in the incoming VLPs. Differences in the requirement for cleavage of the specific sites in Gag were observed between distinct African green monkey cell lines. The results strongly suggest that the mechanism of HIV-1 restriction by TRIM5 alpha involves engagement of the viral capsid by the restriction factor prior to completion of uncoating.

Fitness cost of escape mutations in p24 Gag in association with control of human immunodeficiency virus type 1

Mutational escape by human immunodeficiency virus (HIV) from cytotoxic T-lymphocyte (CTL) recognition is a major challenge for vaccine design. However, recent studies suggest that CTL escape may carry a sufficient cost to viral replicative capacity to facilitate subsequent immune control of a now attenuated virus. In order to examine how limitations can be imposed on viral escape, the epitope TSTLQEQIGW (TW10 [Gag residues 240 to 249]), presented by two HLA alleles associated with effective control of HIV, HLA-B*57 and -B*5801, was investigated. The in vitro experiments described here demonstrate that the dominant TW10 escape mutation, T242N, reduces viral replicative capacity. Structural analysis reveals that T242 plays a critical role in defining the start point and in stabilizing helix 6 within p24 Gag, ensuring that escape occurs at a significant cost. A very similar role is played by Thr-180, which is also an escape residue, but within a second p24 Gag epitope associated with immune control. Analysis of HIV type 1 gag in 206 B*57/5801-positive subjects reveals three principle alternative TW10-associated variants, and each is strongly linked to concomitant additional variants within p24 Gag, suggesting that functional constraints operate against their occurrence alone. The extreme conservation of p24 Gag and the predictable nature of escape variation resulting from these tight functional constraints indicate that p24 Gag may be a critical immunogen in vaccine design and suggest novel vaccination strategies to limit viral escape options from such epitopes.

A small loop in the capsid protein of Moloney murine leukemia virus controls assembly of spherical cores

We report the identification of a novel domain in the Gag protein of Moloney murine leukemia virus (MoLV) that is important for the formation of spherical cores. Analysis of 18 insertional mutations in the N-terminal domain of the capsid protein (CA) identified 3 that were severely defective for viral assembly and release. Transmission electron microscopy of cells producing these mutants showed assembly of Gag proteins in large, flat or dome-shaped patches at the plasma membrane. Spherical cores were not formed, and viral particles were not released. This late assembly/release block was partially rescued by wild-type virus. All three mutations localized to the small loop between alpha-helices 4 and 5 of CA, analogous to the cyclophilin A-binding loop of human immunodeficiency virus type 1 CA. In the X-ray structure of the hexameric form of MLV CA, this loop is located at the periphery of the hexamer. The phenotypes of mutations in this loop suggest that formation of a planar lattice of Gag is unhindered by mutations in the loop. However, the lack of progression of these planar structures to spherical ones suggests that mutations in this loop may prevent formation of pentamers or of stable pentamer-hexamer interactions, which are essential for the formation of a closed, spherical core. This region in CA, focused to a few residues of a small loop, may offer a novel therapeutic target for retroviral diseases.

A domain directly C-terminal to the major homology region of human immunodeficiency type 1 capsid protein plays a crucial role in directing both virus assembly and incorporation of Gag-Pol

We demonstrate here that a deletion of 14 amino acid residues directly C-terminal to the major homology region (MHR) of the HIV-1 capsid (CA) in Gag-Pol markedly affects the incorporation of Gag-Pol into virions. The 14-amino acid deletion also significantly impaired virus assembly. In agreement with previous reports, mutations at the very C-terminus of CA resulted in a remarkable reduction in virus production. However, HIV-1 Gag-Pol precursors containing the C-terminal CA mutation were still capable of being incorporated into virions at a level of about 50% that of the wild-type. These results suggest that the domain immediately C-terminal to the MHR is functionally involved in Gag-Gag and Gag/Gag-Pol interaction, and this supports the notion that Gag or Gag-Pol mutants blocked in assembly into virus particles can be rescued into virions provided they retain the domains that are able to interact with the Gag precursor. An HIV-1 Gag-Pol deletion mutant retaining a minimal sequence consisting of the MHR and the adjacent CA-SP1 was efficiently incorporated into virions. Analysis by immunofluorescence staining indicated that the subcellular localization patterns shown by the Gag-Pol mutants were not fully compatible with their efficiency in being incorporated into virions, suggesting that the ability of Gag-Pol mutants to be incorporated into virions largely depends on their interactions with the Gag precursor.

The retroviral capsid domain dictates virion size, morphology, and coassembly of gag into virus-like particles

The retroviral structural protein, Gag, is capable of independently assembling into virus-like particles (VLPs) in living cells and in vitro. Immature VLPs of human immunodeficiency virus type 1 (HIV-1) and of Rous sarcoma virus (RSV) are morphologically distinct when viewed by transmission electron microscopy (TEM). To better understand the nature of the Gag-Gag interactions leading to these distinctions, we constructed vectors encoding several RSV/HIV-1 chimeric Gag proteins for expression in either insect cells or vertebrate cells. We used TEM, confocal fluorescence microscopy, and a novel correlative scanning EM (SEM)-confocal microscopy technique to study the assembly properties of these proteins. Most chimeric proteins assembled into regular VLPs, with the capsid (CA) domain being the primary determinant of overall particle diameter and morphology. The presence of domains between matrix and CA also influenced particle morphology by increasing the spacing between the inner electron-dense ring and the VLP membrane. Fluorescently tagged versions of wild-type RSV, HIV-1, or murine leukemia virus Gag did not colocalize in cells. However, wild-type Gag proteins colocalized extensively with chimeric Gag proteins bearing the same CA domain, implying that Gag interactions are mediated by CA. A dramatic example of this phenomenon was provided by a nuclear export-deficient chimera of RSV Gag carrying the HIV-1 CA domain, which by itself localized to the nucleus but relocalized to the cytoplasm in the presence of wild type HIV-1 Gag. Wild-type and chimeric Gag proteins were capable of coassembly into a single VLP as viewed by correlative fluorescence SEM if, and only if, the CA domain was derived from the same virus. These results imply that the primary selectivity of Gag-Gag interactions is determined by the CA domain.

Cryo-electron microscopy reveals conserved and divergent features of gag packing in immature particles of Rous sarcoma virus and human immunodeficiency virus

Retrovirus assembly proceeds via multimerisation of the major structural protein, Gag, into a tightly packed, spherical particle that buds from the membrane of the host cell. The lateral packing arrangement of the human immunodeficiency virus type 1 (HIV-1) Gag CA (capsid) domain in the immature virus has been described. Here we have used cryo-electron microscopy (cryo-EM) and image processing to determine the lateral and radial arrangement of Gag in in vivo and in vitro assembled Rous sarcoma virus (RSV) particles and to compare these features with those of HIV-1. We found that the lateral packing arrangement in the vicinity of the inner sub-domain of CA is conserved between these retroviruses. The curvature of the lattice, however, is different. RSV Gag protein adopts a more tightly curved lattice than is seen in HIV-1, and the virions therefore contain fewer copies of Gag. In addition, consideration of the relationship between the radial position of different Gag domains and their lateral spacings in particles of different diameters, suggests that the N-terminal MA (matrix) domain does not form a single, regular lattice in immature retrovirus particles.

Association of human immunodeficiency virus type 1 gag with membrane does not require highly basic sequences in the nucleocapsid: use of a novel Gag multimerization assay

Human immunodeficiency virus type 1 (HIV-1) particle production, a process driven by the Gag polyprotein precursor, occurs on the plasma membrane in most cell types. The plasma membrane contains cholesterol-enriched microdomains termed lipid rafts, which can be isolated as detergent-resistant membrane (DRM). Previously, we and others demonstrated that HIV-1 Gag is associated with DRM and that disruption of Gag-raft interactions impairs HIV-1 particle production. However, the determinants of Gag-raft association remain undefined. In this study, we developed a novel epitope-based Gag multimerization assay to examine whether Gag assembly is essential for its association with lipid rafts. We observed that membrane-associated, full-length Gag is poorly detected by immunoprecipitation relative to non-membrane-bound Gag. This poor detection is due to assembly-driven masking of Gag epitopes, as denaturation greatly improves immunoprecipitation. Gag mutants lacking the Gag-Gag interaction domain located in the N terminus of the nucleocapsid (NC) were efficiently immunoprecipitated without denaturation, indicating that the epitope masking is caused by higher-order Gag multimerization. We used this assay to examine the relationship between Gag assembly and Gag binding to total cellular membrane and DRM. Importantly, a multimerization-defective NC mutant displayed wild-type levels of membrane binding and DRM association, indicating that NC-mediated Gag multimerization is dispensable for association of Gag with membrane or DRM. We also demonstrate that different properties of sucrose and iodixanol membrane flotation gradients may explain some discrepancies regarding Gag-raft interactions. This report offers new insights into the association of HIV-1 Gag with membrane and with lipid rafts.

Effect of macromolecular crowding agents on human immunodeficiency virus type 1 capsid protein assembly in vitro

Previous studies on the self-assembly of capsid protein CA of human immunodeficiency virus type 1 (HIV-1) in vitro have provided important insights on the structure and assembly of the mature HIV-1 capsid. However, CA polymerization in vitro was previously observed to occur only at very high ionic strength. Here, we have analyzed the effects on CA assembly in vitro of adding unrelated, inert macromolecules (crowding agents), aimed at mimicking the crowded (very high macromolecular effective concentration) environment within the HIV-1 virion. Crowding agents induced fast and efficient polymerization of CA even at low (close to physiological) ionic strength. The hollow cylinders thus assembled were indistinguishable in shape and dimensions from those formed in dilute protein solutions at high ionic strength. However, two important differences were noted: (i) disassembly by dilution of the capsid-like particles was undetectable at very high ionic strength, but occurred rapidly at low ionic strength in the presence of a crowding agent, and (ii) a variant CA from a presumed infectious HIV-1 with mutations at the CA dimerization interface was unable to assemble at any ionic strength in the absence of a crowding agent; in contrast, this mutation allowed efficient assembly, even at low ionic strength, when a crowding agent was used. The use of a low ionic strength and inert macromolecules to mimic the crowded environment inside the HIV-1 virion may lead to a better in vitro evaluation of the effects of conditions, mutations or/and other molecules, including potential antiviral compounds, on HIV-1 capsid assembly, stability and disassembly.

Structure and ESCRT-III protein interactions of the MIT domain of human VPS4A

The VPS4 AAA ATPases function both in endosomal vesicle formation and in the budding of many enveloped RNA viruses, including HIV-1. VPS4 proteins act by binding and catalyzing release of the membrane-associated ESCRT-III protein lattice, thereby allowing multiple rounds of protein sorting and vesicle formation. Here, we report the solution structure of the N-terminal VPS4A microtubule interacting and transport (MIT) domain and demonstrate that the VPS4A MIT domain binds the C-terminal half of the ESCRT-III protein, CHMP1B (Kd = 20 +/- 13 microM). The MIT domain forms an asymmetric three-helix bundle that resembles the first three helices in a tetratricopeptide repeat (TPR) motif. Unusual interhelical interactions are mediated by a series of conserved aromatic residues that form coiled-coil interactions between the second two helices and also pack against the conserved alanines that interdigitate between the first two helices. Mutational analyses revealed that a conserved leucine residue (Leu-64) on the third helix that would normally bind the fourth helix in an extended TPR is used to bind CHMP1B, raising the possibility that ESCRT-III proteins may bind by completing the TPR motif.

A peptide inhibitor of HIV-1 assembly in vitro

Formation of infectious HIV-1 involves assembly of Gag polyproteins into immature particles and subsequent assembly of mature capsids after proteolytic disassembly of the Gag shell. We report a 12-mer peptide, capsid assembly inhibitor (CAI), that binds the capsid (CA) domain of Gag and inhibits assembly of immature- and mature-like capsid particles in vitro. CAI was identified by phage display screening among a group of peptides with similar sequences that bind to a single reactive site in CA. Its binding site was mapped to CA residues 169-191, with an additional contribution from the last helix of CA. This result was confirmed by a separate X-ray structure analysis showing that CAI inserts into a conserved hydrophobic groove and alters the CA dimer interface. The CAI binding site is a new target for antiviral development, and CAI is the first known inhibitor directed against assembly of immature HIV-1.

The HIV-1 capsid protein C-terminal domain in complex with a virus assembly inhibitor

Immature HIV particles bud from infected cells after assembly at the cytoplasmic side of cellular membranes. This assembly is driven by interactions between Gag polyproteins. Mature particles, each containing a characteristic conical core, are later generated by proteolytic maturation of Gag in the virion. The C-terminal domain of the HIV-1 capsid protein (C-CA) has been shown to contain oligomerization determinants essential for particle assembly. Here we report the 1.7-A-resolution crystal structure of C-CA in complex with a peptide capable of inhibiting immature- and mature-like particle assembly in vitro. The peptide inserts as an amphipathic alpha-helix into a conserved hydrophobic groove of C-CA, resulting in formation of a compact five-helix bundle with altered dimeric interactions. This structure thus reveals the details of an allosteric site in the HIV capsid protein that can be targeted for antiviral therapy.

ATPgammaS disrupts human immunodeficiency virus type 1 virion core integrity

Heat shock protein 70 (Hsp70) is incorporated within the membrane of primate lentiviral virions. Here we demonstrate that Hsp70 is also incorporated into oncoretroviral virions and that it remains associated with membrane-stripped human immunodeficiency virus type 1 (HIV-1) virion cores. To determine if Hsp70 promotes virion infectivity, we attempted to generate Hsp70-deficient virions with gag deletion mutations, Hsp70 transdominant mutants, or RNA interference, but these efforts were confounded, largely because they disrupt virion assembly. Given that polypeptide substrates are bound and released by Hsp70 in an ATP-hydrolytic reaction cycle, we supposed that incubation of HIV-1 virions with ATP would perturb Hsp70 interaction with substrates in the virion and thereby decrease infectivity. Treatment with ATP or ADP had no observable effect, but ATPgammaS and GTPgammaS, nucleotide triphosphate analogues resistant to Hsp70 hydrolysis, dramatically reduced the infectivity of HIV-1 and murine leukemia virus virions. ATPgammaS-treated virions were competent for fusion with susceptible target cells, but viral cDNA synthesis was inhibited to an extent that correlated with the magnitude of decrease in infectivity. Intravirion reverse transcription by HIV-1, simian immunodeficiency virus, or murine leukemia virus was also inhibited by ATPgammaS. The effects of ATPgammaS on HIV-1 reverse transcription appeared to be indirect, resulting from disruption of virion core morphology that was evident by transmission electron microscopy. Consistent with effects on capsid conformation, ATPgammaS-treated viruslike particles failed to saturate host antiviral restriction activity. Our observations support a model in which the catalytic activity of virion-associated Hsp70 is required to maintain structural integrity of the virion core.

Domain swapping and retroviral assembly

The structure of a mammalian SCAN domain has been recently reported. The molecule is a structural homolog of the HIV-1 capsid protein and forms a domain-swapped dimer in solution. The authors propose a similar domain-swapping event facilitates HIV-1 assembly, providing a new model for protein-protein interactions underlying viral particle formation.

A HIV-1 minimal gag protein is superior to nucleocapsid at in vitro annealing and exhibits multimerization-induced inhibition of reverse transcription

HIV-1 uses tRNA3Lys to prime reverse transcription of its viral RNA. In this process, the 3'-end of tRNA3Lys must be annealed to the primer binding site of HIV-1 genomic RNA, and the two molecules together form a complex structure. During annealing, the nucleocapsid (NC) protein enhances the unwinding of tertiary structures within both RNA molecules. Moreover, the packaging of tRNA3Lys occurs prior to viral budding at a time when NC is still part of the Pr55Gag polyprotein. In contrast, Pr55Gag is able to produce virus-like particles on its own. We have recently shown that an N-terminal extended form of NC (mGag), containing all of the minimal elements required for virus-like particle formation, possesses greater affinity for HIV-1 genomic RNA than does NC alone. We have now studied the tRNA3Lys-annealing properties of mGag in comparison to those of NC and report that the former is more efficient in this regard than the latter. We have also tested each of a mutant version of mGag, an extended form of mGag, and an almost full-length form of Gag, and showed that all of these possessed greater tRNA-annealing capacity than did the viral NC protein. Yet, surprisingly, multimerization of Gag-related proteins did not abrogate this annealing process but rather resulted in dramatically reduced levels of reverse transcriptase processivity. These results suggest that the initial stages of reverse transcription may be regulated by the multimerization of Pr55Gag polyprotein at times prior to the cleavage of NC.

Virus particle core defects caused by mutations in the human immunodeficiency virus capsid N-terminal domain

The N-terminal domains (NTDs) of the human immunodeficiency virus type 1 (HIV-1) capsid (CA) protein have been modeled to form hexamer rings in the mature cores of virions. In vitro, hexamer ring units organize into either tubes or spheres, in a pH-dependent fashion. To probe factors which might govern hexamer assembly preferences in vivo, we examined the effects of mutations at CA histidine residue 84 (H84), modeled at the outer edges of NTD hexamers, as well as a nearby histidine (H87) in the cyclophilin A (CypA) binding loop. Although mutations at H87 yielded infectious virions, mutations at H84 produced assembly-competent but poorly infectious virions. The H84 mutant viruses incorporated wild-type levels of CypA and viral RNAs and showed nearly normal signals in virus entry assays. However, mutant CA proteins assembled aberrant virus cores, and mutant core fractions retained abnormally high levels of CA but reduced reverse transcriptase activities. Our results suggest that HIV-1 CA residue 84 contributes to a structure which helps control either NTD hexamer assembly or the organization of hexamers into higher-order structures.

Electrostatic Repulsion, Compensatory Mutations, and Long-range Non-additive Effects at the Dimerization Interface of the HIV Capsid Protein

In previous studies, thermodynamic dissection of the dimerization interface in CA-C, the C-terminal domain of the capsid protein of human immunodeficiency virus type 1, revealed that individual mutation to alanine of Ser178, Glu180, Glu187 or Gln192 led to significant increases in dimerization affinity. Four related aspects derived from this observation have been now addressed, and the results can be summarized as follows: (i) thermodynamic analyses indicate the presence of an intersubunit electrostatic repulsion between both Glu180 residues. (ii) The mutation Glu180 to Ala was detected in nearly all type 2 human immunodeficiency virus variants, and in several simian immunodeficiency viruses analyzed. However, this mutation was strictly co-variant with mutations Ser178Asp in a neighboring residue, and Glu187Gln. Thermodynamic analysis of multiple mutants showed that Ser178Asp compensated, alone or together with Glu187Gln, the increase in affinity caused by the mutation Glu180Ala, and restored a lower dimerization affinity. (iii) The increase in the affinity constant caused by the multiple mutation to Ala of Ser178, Glu180, Glu187 and Gln192 was more than one order of magnitude lower than predicted if additivity were present, despite the fact that the 178/180 pair and the two other residues were located more than 10A apart. (iv) Mutations in CA-C that caused non-additive increases in dimerization affinity also caused a non-additive increase in the capacity of the isolated CA-C domain to inhibit the assembly of capsid-like HIV-1 particles in kinetic assays. In summary, the study of a protein-protein interface involved in the building of a viral capsid has revealed unusual features, including intersubunit electrostatic repulsions, co-variant, compensatory mutations that may evolutionarily preserve a low association constant, and long-range, large magnitude non-additive effects on association.

Mammalian SCAN Domain Dimer Is a Domain-Swapped Homolog of the HIV Capsid C-Terminal Domain

Retroviral assembly is driven by multiple interactions mediated by the Gag polyprotein, the main structural component of the forming viral shell. Critical determinants of Gag oligomerization are contained within the C-terminal domain (CTD) of the capsid protein, which also harbors a conserved sequence motif, the major homology region (MHR), in the otherwise highly variable Gag. An unexpected clue about the MHR function in retroviral assembly emerges from the structure of the zinc finger-associated SCAN domain we describe here. The SCAN dimer adopts a fold almost identical to that of the retroviral capsid CTD but uses an entirely different dimerization interface caused by swapping the MHR-like element between the monomers. Mutations in retroviral capsid proteins and functional data suggest that a SCAN-like MHR-swapped CTD dimer forms during immature particle assembly. In the SCAN-like dimer, the MHR contributes the major part of the large intertwined dimer interface explaining its functional significance.

Structural requirements for recognition of the human immunodeficiency virus type 1 core during host restriction in owl monkey cells

Human immunodeficiency virus type 1 (HIV-1) infection of simian cells is restricted at an early postentry step by host factors whose mechanism of action is unclear. These factors target the viral capsid protein (CA) and attenuate reverse transcription, suggesting that they bind to the HIV-1 core and interfere with its uncoating. To identify the relevant binding determinants in the capsid, we tested the capacity of viruses containing Gag cleavage site mutations and amino acid substitutions in CA to inhibit restriction of a wild type HIV-1 reporter virus in owl monkey cells. The results demonstrated that a stable, polymeric capsid and a correctly folded amino-terminal CA subunit interface are essential for saturation of host restriction in target cells by HIV-1 cores. We conclude that the owl monkey cellular restriction machinery recognizes a polymeric array of CA molecules, most likely via direct engagement of the HIV-1 capsid in target cells prior to uncoating.

Structural and dynamics studies of the D54A mutant of human T cell leukemia virus-1 capsid protein

The human T cell leukemia virus and the human immunodeficiency virus share a highly conserved, predominantly helical two-domain mature capsid (CA) protein structure with an N-terminal beta-hairpin. Despite overall structural similarity, differences exist in the backbone dynamic properties of the CA N-terminal domain. Since studies with other retroviruses suggest that the beta-hairpin is critical for formation of a CA-CA interface, we investigated the functional role of the human T cell leukemia virus beta-hairpin by disrupting the salt bridge between Pro(1) and Asp(54) that stabilizes the beta-hairpin. NMR (15)N relaxation data were used to characterize the backbone dynamics of the D54A mutant in the context of the N-terminal domains, compared with the wild-type counterpart. Moreover, the effect of the mutation on proteolytic processing and release of virus-like particles (VLPs) from human cells in culture was determined. Conformational and dynamic changes resulting from the mutation were detected by NMR spectroscopy. The mutation also altered the conformation of mature CA in cells and VLPs, as reflected by differential antibody recognition of the wild-type and mutated CA proteins. In contrast, the mutation did not detectably affect antibody recognition of the CA protein precursor or release of VLPs assembled by the precursor, consistent with the fact that the hairpin cannot form in the precursor molecule. The particle morphology and size were not detectably affected. The results indicate that the beta-hairpin contributes to the overall structure of the mature CA protein and suggest that differences in the backbone dynamics of the beta-hairpin contribute to mature CA structure, possibly introducing flexibility into interface formation during proteolytic maturation.

Selected amino acid substitutions in the C-terminal region of human immunodeficiency virus type 1 capsid protein affect virus assembly and release

The capsid protein (CA or p24) of human immunodeficiency virus type 1 (HIV-1) plays a major role both early and late in the virus replication cycle. Many studies have suggested that the C-terminal domain of this protein is involved in dimerization and proper assembly of the viral core. Point mutations were introduced in two conserved sites of this region and their effects on viral protein expression, particle assembly and infectivity were studied. Eight different mutants (L205A+P207A, L205A, P207A, 223GPG225AAA, G223A, P224A, G225A and V221G) of the infectious clone pNL4-3 were constructed. Most substitutions had no substantial effect on HIV-1 protein synthesis, yet they impaired viral infectivity and particle production. The two mutants P207A and V221G also had a profound effect on Gag–Pol protein processing in HeLa–tat cells. However, these results were cell line-specific and Gag–Pol processing of P207A was not affected in 293T cells. In HeLa–tat cells, no virus particles were detected with the P207A mutation, whereas the other mutant virus particles were heterogeneous in size and morphology. None of the mutants showed normal, mature, conical core structures in HeLa–tat cells. These results indicate that the two conserved sequences in the C-terminal CA domain are essential for proper morphogenesis and infectivity of HIV-1 particles.

The conserved carboxy terminus of the capsid domain of human immunodeficiency virus type 1 gag protein is important for virion assembly and release

The retroviral Gag precursor plays an important role in the assembly of virion particles. The capsid (CA) protein of the Gag molecule makes a major contribution to this process. In the crystal structure of the free CA protein of the human immunodeficiency virus type 1 (HIV-1), 11 residues of the C terminus were found to be unstructured, and to date no information exists on the structure of these residues in the context of the Gag precursor molecule. We performed phylogenetic analysis and demonstrated a high degree of conservation of these 11 amino acids. Deletion of this cluster or introduction of various point mutations into these residues resulted in significant impairment of particle infectivity. In this cluster, two putative structural regions were identified, residues that form a hinge region (353-VGGP-356) and those that contribute to an alpha-helix (357-GHKARVL-363). Overall, mutations in these regions resulted in inhibition of virion production, but mutations in the hinge region demonstrated the most significant reduction. Although all the Gag mutants appeared to have normal Gag-Gag and Gag-RNA interactions, the hinge mutants were characterized by abnormal formation of cytoplasmic Gag complexes. Gag proteins with mutations in the hinge region demonstrated normal membrane association but aberrant rod-like membrane structures. More detailed analysis of these structures in one of the mutants demonstrated abnormal trapped Gag assemblies. These data suggest that the conserved CA C terminus is important for HIV-1 virion assembly and release and define a putative target for drug design geared to inhibit the HIV-1 assembly process.

High-resolution structure of a retroviral capsid hexameric amino-terminal domain

Retroviruses are the aetiological agents of a range of human diseases including AIDS and T-cell leukaemias. They follow complex life cycles, which are still only partly understood at the molecular level. Maturation of newly formed retroviral particles is an essential step in production of infectious virions, and requires proteolytic cleavage of Gag polyproteins in the immature particle to form the matrix, capsid and nucleocapsid proteins present in the mature virion. Capsid proteins associate to form a dense viral core that may be spherical, cylindrical or conical depending on the genus of the virus. Nonetheless, these assemblies all appear to be composed of a lattice formed from hexagonal rings, each containing six capsid monomers. Here, we describe the X-ray structure of an individual hexagonal assembly from N-tropic murine leukaemia virus (N-MLV). The interface between capsid monomers is generally polar, consistent with weak interactions within the hexamer. Similar architectures are probably crucial for the regulation of capsid assembly and disassembly in all retroviruses. Together, these observations provide new insights into retroviral uncoating and how cellular restriction factors may interfere with viral replication.

Investigation of N-Terminal Domain Charged Residues on the Assembly and Stability of HIV-1 CA†

The human immunodeficiency virus type 1 (HIV-1) capsid protein (CA) plays a crucial role in both assembly and maturation of the virion as well as viral infectivity. Previous in vivo experiments generated two N-terminal domain charge change mutants (E45A and E128A/R132A) that showed an increase in stability of the viral core. This increase in core stability resulted in decreased infectivity, suggesting the need for a delicate balance of favorable and unfavorable interactions to both allow assembly and facilitate uncoating following infection. Purified CA protein can be triggered to assemble into tubelike structures through the use of a high salt buffer system. The requirement for high salt suggests the need to overcome charge/charge repulsion between subunits. The mutations mentioned above lie within a highly charged region of the N-terminal domain of CA, away from any of the proposed protein/protein interaction sites. We constructed a number of charge mutants in this region (E45A, E45K, E128A, R132A, E128A/R132A, K131A, and K131E) and evaluated their effect on protein stability in addition to their effect on the rate of CA assembly. We find that the mutations alter the rate of assembly of CA without significantly changing the stability of the CA monomer. The changes in rate for the mutants studied are found to be due to varying degrees of electrostatic repulsion between the subunits of each mutant.

In vitro identification and characterization of an early complex linking HIV-1 genomic RNA recognition and Pr55Gag multimerization

The minimal protein requirements that drive virus-like particle formation of human immunodeficiency virus type 1 (HIV-1) have been established. The C-terminal domain of capsid (CTD-CA) and nucleocapsid (NC) are the most important domains in a so-called minimal Gag protein (mGag). The CTD is essential for Gag oligomerization. NC is known to bind and encapsidate HIV-1 genomic RNA. The spacer peptide, SP1, located between CA and NC is important for the multimerization process, viral maturation and recognition of HIV-1 genomic RNA by NC. In this study, we show that NC in the context of an mGag protein binds HIV-1 genomic RNA with almost 10-fold higher affinity. The protein region encompassing the 11th alpha-helix of CA and the proposed alpha-helix in the CA/SP1 boundary region play important roles in this increased binding capacity. Furthermore, sequences downstream from stem loop 4 of the HIV-1 genomic RNA are also important for this RNA-protein interaction. In gel shift assays using purified mGag and a model RNA spanning the region from +223 to +506 of HIV-1 genomic RNA, we have identified an early complex (EC) formation between 2 proteins and 1 RNA molecule. This EC was not present in experiments performed with a mutant mGag protein, which contains a CTD dimerization mutation (M318A). These data suggest that the dimerization interface of the CTD plays an important role in EC formation, and, as a consequence, in RNA-protein association and multimerization. We propose a model for the RNA-protein interaction, based on previous results and those presented in this study.

Structural Constraints on Viral Escape from HIV- and SIV-Specific Cytotoxic T-Lymphocytes

Cytotoxic T lymphocytes (CTL) play a central role in controlling lentiviral infections in both humans and monkeys. While they contain the spread of human immunodeficiency virus (HIV) and simian immunodeficiency virus (SIV), CTL are not capable of fully eradicating virus following infection. Ongoing viral replication can therefore lead to the accumulation of viral mutations within CTL epitopes that can undermine cellular immune control of virus. Here we review the importance of CTL in controlling HIV/SIV infection and how immunologic pressure exerted by effector T cells selects for viral variants that escape CTL recognition. We review two examples of viral escape from CTL at highly conserved epitopes that illustrate the extraordinary capacity of lentiviruses to adapt to their immunologic environment despite structural constraints on the ability of the virus to accommodate mutations.

Species-specific tropism determinants in the human immunodeficiency virus type 1 capsid

Retroviral tropism is determined in part by cellular restriction factors that block infection by targeting the incoming viral capsid. Indeed, human immunodeficiency virus type 1 (HIV-1) infection of many nonhuman primate cells is inhibited by one such factor, termed Lv1. In contrast, a restriction factor in humans, termed Ref1, does not inhibit HIV-1 infection unless nonnatural mutations are introduced into the HIV-1 capsid protein (CA). Here, we examined the infectivity of a panel of mutant HIV-1 strains carrying substitutions in the N-terminal CA domain in cells that exhibit restriction attributable to Lv1 or Ref1. Manipulation of HIV-1 CA could alter HIV-1 tropism, and several mutations were identified that increased or decreased HIV-1 infectivity in a target-cell-specific manner. Many residues that affected HIV-1 tropism were located in the three variable loops that lie on the outer surface of the modeled HIV-1 conical capsid. Some tropism determinants, including the CypA binding site, coincided with residues whose mutation conferred on HIV-1 CA the ability to saturate Ref1 in human cells. Notably, a mutation that reverses the infectivity defect in human cells induced by CypA binding site mutation inhibits recognition by Ref1. Overall, these findings demonstrate that exposed variable loops in CA and a partial CypA "coat" can modulate restriction and HIV-1 tropism and suggest a model in which the exposed surface of the incoming retroviral capsid is the target for inhibition by host cell-specific restriction factors.