Structure, assembly, and function of the spore surface layers

Pasteuria endospores from Heterodera cajani (Nematoda: Heteroderidae) exhibit inverted attachment and altered germination in cross-infection studies with Globodera pallida (Nematoda: Heteroderidae)

The Pasteuria group of Gram-positive, endospore-forming bacteria are parasites of invertebrates and exhibit differences in host specificity. We describe a cross-infection study between an isolate of Pasteuria from pigeon pea cyst nematode, Heterodera cajani, which also infects the potato cyst nematode, Globodera pallida, from the United Kingdom. A proportion of the attached endospores, 13% on H. cajani and 22% on G. pallida adhere to the cuticle in an inverted orientation. Inverted and conventionally attached endospores germinated and produced bacillus-like rods that completed their life cycle in < 15 weeks within females of G. pallida. This is the first example in which the life cycle of a Pasteuria population was systematically followed in two different nematode genera. A 1430-base pair fragment of the 16S rRNA gene sequence of the Pasteuria isolate from H. cajani revealed 98.6% similarity to the orthologous gene in Pasteuria nishizawae. Additionally, their respective endospore sizes were not significantly different, in contrast their host ranges are. Potential reasons for this remain unclear and are discussed.

Scanning surface potential microscopy of spore adhesion on surfaces

The adhesion of spores of Bacillus anthracis - the cause of anthrax and a likely biological threat - to solid surfaces is an important consideration in cleanup after an accidental or deliberate release. However, because of safety concerns, directly studying B. anthracis spores with advanced instrumentation is problematic. As a first step, we are examining the electrostatic potential of Bacillus thuringiensis (Bt), which is a closely related species that is often used as a simulant to study B. anthracis. Scanning surface potential microscopy (SSPM), also known as Kelvin probe force microscopy (KPFM), was used to investigate the influence of relative humidity (RH) on the surface electrostatic potential of Bt that had adhered to silica, mica, or gold substrates. AFM/SSPM side-by-side images were obtained separately in air, at various values of RH, after an aqueous droplet with spores was applied on each surface and allowed to dry before measurements. In the SSPM images, a negative potential on the surface of the spores was observed compared with that of the substrates. The surface potential decreased as the humidity increased. Spores were unable to adhere to a surface with an extremely negative potential, such as mica.

Gene clusters located on two large plasmids determine spore crystal association (SCA) in Bacillus thuringiensis subsp. finitimus strain YBT-020

Crystals in Bacillus thuringiensis are usually formed in the mother cell compartment during sporulation and are separated from the spores after mother cell lysis. In a few strains, crystals are produced inside the exosporium and are associated with the spores after sporulation. This special phenotype, named ‘spore crystal association’ (SCA), typically occurs in B. thuringiensis subsp. finitimus. Our aim was to identify genes determining the SCA phenotype in B. thuringiensis subsp. finitimus strain YBT-020. Plasmid conjugation experiments indicated that the SCA phenotype in this strain was tightly linked with two large plasmids (pBMB26 and pBMB28). A shuttle bacterial artificial chromosome (BAC) library of strain YBT-020 was constructed. Six fragments from BAC clones were screened from this library and discovered to cover the full length of pBMB26; four others were found to cover pBMB28. Using fragment complementation testing, two fragments, each of approximately 35 kb and located on pBMB26 and pBMB28, were observed to recover the SCA phenotype in an acrystalliferous mutant, B. thuringiensis strain BMB171. Furthermore, deletion analysis indicated that the crystal protein gene cry26Aa from pBMB26, along with five genes from pBMB28, were indispensable to the SCA phenotype. Gene disruption and frame-shift mutation analyses revealed that two of the five genes from pBMB28, which showed low similarity to crystal proteins, determined the location of crystals inside the exosporium. Gene disruption revealed that the three remaining genes, similar to spore germination genes, contributed to the stability of the SCA phenotype in strain YBT-020. Our results thus identified the genes determining the SCA phenotype in B. thuringiensis subsp. finitimus.

Peptidoglycan remodeling and conversion of an inner membrane into an outer membrane during sporulation

Two hallmarks of the Firmicute phylum, which includes the Bacilli and Clostridia classes, are their ability to form endospores and their "Gram-positive" single-membraned, thick-cell-wall envelope structure. Acetonema longum is part of a lesser-known family (the Veillonellaceae) of Clostridia that form endospores but that are surprisingly "Gram negative," possessing both an inner and outer membrane and a thin cell wall. Here, we present macromolecular resolution, 3D electron cryotomographic images of vegetative, sporulating, and germinating A. longum cells showing that during the sporulation process, the inner membrane of the mother cell is inverted and transformed to become the outer membrane of the germinating cell. Peptidoglycan persists throughout, leading to a revised, "continuous" model of its role in the process. Coupled with genomic analyses, these results point to sporulation as a mechanism by which the bacterial outer membrane may have arisen and A. longum as a potential "missing link" between single- and double-membraned bacteria.

Gel-free proteomic identification of the Bacillus subtilis insoluble spore coat protein fraction

Species from the genus Bacillus have the ability to form endospores, dormant cellular forms that are able to survive heat and acid preservation techniques commonly used in the food industry. Resistance characteristics of spores towards various environmental stresses are in part attributed to their coat proteins. Previously, 70 proteins have been assigned to the spore coat of Bacillus subtilis using SDS-PAGE, 2-DE gel approaches, protein localization studies and genome-wide transcriptome studies. Here, we present a "gel-free" protocol that is capable of comprehensive B. subtilis spore coat protein extraction and addresses the insoluble coat fraction. Using LC-MS/MS we identified 55 proteins from the insoluble B. subtilis spore coat protein fraction, of which 21 are putative novel spore coat proteins not assigned to the spore coat until now. Identification of spore coat proteins from a B. subtilis food-spoilage isolate corroborated a generic and "applied" use of our protocol. To develop specific and sensitive spore detection and/or purification systems from food stuff or patient material, suitable protein targets can be derived from our proteomic approach. Finally, the protocol can be extended to study cross-linking among the spore coat proteins as well as for their quantification.

Recent progress in Bacillus subtilis sporulation

The Gram-positive bacterium Bacillus subtilis can initiate the process of sporulation under conditions of nutrient limitation. Here, we review some of the last 5 years of work in this area, with a particular focus on the decision to initiate sporulation, DNA translocation, cell-cell communication, protein localization and spore morphogenesis. The progress we describe has implications not only just for the study of sporulation but also for other biological systems where homologs of sporulation-specific proteins are involved in vegetative growth.

Organization and evolution of the cotG and cotH genes of Bacillus subtilis

The cotG and cotH genes of Bacillus subtilis encode two previously characterized spore coat proteins. The two genes are adjacent on the chromosome and divergently transcribed by σ(K), a sporulation-specific σ factor of the RNA polymerase. We report evidence that the cotH promoter maps 812 bp upstream of the beginning of its coding region and that the divergent cotG gene is entirely contained between the promoter and the coding part of cotH. A bioinformatic analysis of all entirely sequenced prokaryotic genomes showed that such chromosomal organization is not common in spore-forming bacilli. Indeed, CotG is present only in B. subtilis, B. amyloliquefaciens, and B. atrophaeus and in two Geobacillus strains. When present, cotG always encodes a modular protein composed of tandem repeats and is always close to but divergently transcribed with respect to cotH. Bioinformatic and phylogenic data suggest that such genomic organizations have a common evolutionary origin and that the modular structure of the extant cotG genes is the outcome of multiple rounds of gene elongation events of an ancestral minigene.

An improved system for the surface immobilisation of proteins on Bacillus thuringiensis vegetative cells and spores through a new spore cortex-lytic enzyme anchor

An improved surface-immobilisation system was engineered to target heterologous proteins onto vegetative cells and spores of Bacillus thuringiensis plasmid-free recipient strain BMB171. The sporulation-dependent spore cortex-lytic enzyme from B. thuringiensis YBT-1520, SceA, was expressed in vegetative cells and used as the surface anchoring motif. Green fluorescent protein (GFP) and a Bacillus endo-β-1,3-1,4-glucanase (BglS) were used as the fusion partners to test the binding efficiency and the functional activities of immobilised surface proteins. The surface localisation of the SceA-GFP fusion protein on vegetative cells and spores was confirmed by Western blot, immunofluorescence microscopy and flow cytometry. The GFP fluorescence intensity from both vegetative cells and spores was measured and compared to a previously characterised surface display system using a peptidoglycan hydrolase anchor (Mbg). Results demonstrated comparable efficiency of SceA- and Mbg-mediated immobilisation on vegetative cells but a more efficient immobilisation on spores using the SceA anchor, suggesting SceA has greater potential for spore-based applications. The SceA protein was then applied to target BglS onto vegetative cells and spores, and the surface immobilisation was verified by the substantial whole-cell enzymatic activity and enhanced whole-spore enzymatic activity compared to vegetative cells. A dually active B. thuringiensis vegetative cell and spore display system could prove especially valuable for the development of regenerable and heat-stable biocatalysts that function under adverse environmental conditions, for example, an effective feed additive for improved digestion and nutrient absorption by livestock.

Surface layers of Clostridium difficile endospores

Clostridium difficile is an important human pathogen and one where the primary cause of disease is due to the transmission of spores. We have investigated the proteins found in the outer coat layers of C. difficile spores of pathogenic strain 630 (CD630). Five coat proteins, CotA, CotB, CotCB, CotD, and CotE, were shown to be expressed on the outer coat layers of the spore. We demonstrate that purified spores carry catalase, peroxiredoxin, and chitinase activity and that this activity correlates with the predicted functions of three spore coat proteins identified here, CotCB, CotD, and CotE. CotCB and CotD are putative manganese catalases, and CotE is a novel bifunctional protein with peroxiredoxin activity at its amino terminus and chitinase activity at its carboxy terminus. These enzymes could play an important role in coat assembly by polymerizing protein monomers in the coat. CotE, in addition to a role in macromolecular degradation, could play an important role in inflammation, and this may be of direct relevance to the development of the gastrointestinal symptoms that accompany C. difficile infection. Although specific enzyme activity has not yet been assigned to the proteins identified here, this work provides the first detailed study of the C. difficile spore coat.

Relevant uses of surface proteins--display on self-organized biological structures

Proteins are often found attached to surfaces of self‐assembling biological units such as whole microbial cells or subcellular structures, e.g. intracellular inclusions. In the last two decades surface proteins were identified that could serve as anchors for the display of foreign protein functions. Extensive protein engineering based on structure–function data enabled efficient display of technically and/or medically relevant protein functions. Small size, diversity of the anchor protein as well as support structure, genetic manipulability and controlled cultivation of phages, bacterial cells and yeasts contributed to the establishment of designed and specifically functionalized tools for applications as sensors, catalysis, biomedicine, vaccine development and library‐based screening technologies. Traditionally, phage display is employed for library screening but applications in biomedicine and vaccine development are also perceived. For some diagnostic purposes phages are even too small in size so other carrier materials where needed and gave way for cell and yeast display. Only recently, intracellular inclusions such as magnetosomes, polyhydroxyalkanoate granules and lipid bodies were conceived as stable subcellular structures enabling the display of foreign protein functions and showing potential as specific and tailor‐made devices for medical and biotechnological applications.

Surface architecture of endospores of the Bacillus cereus/anthracis/thuringiensis family at the subnanometer scale

Bacteria of the Bacillus cereus family form highly resistant spores, which in the case of the pathogen B. anthracis act as the agents of infection. The outermost layer, the exosporium, enveloping spores of the B. cereus family as well as a number of Clostridia, plays roles in spore adhesion, dissemination, targeting, and germination control. We have analyzed two naturally crystalline layers associated with the exosporium, one representing the "basal" layer to which the outermost spore layer ("hairy nap") is attached, and the other likely representing a subsurface ("parasporal") layer. We have used electron cryomicroscopy at a resolution of 0.8-0.6 nm and circular dichroism spectroscopic measurements to reveal a highly α-helical structure for both layers. The helices are assembled into 2D arrays of "cups" or "crowns." High-resolution atomic force microscopy of the outermost layer showed that the open ends of these cups face the external environment and the highly immunogenic collagen-like fibrils of the hairy nap (BclA) are attached to this surface. Based on our findings, we present a molecular model for the spore surface and propose how this surface can act as a semipermeable barrier and a matrix for binding of molecules involved in defense, germination control, and other interactions of the spore with the environment.

Carbohydrate-active enzymes from pigmented Bacilli: a genomic approach to assess carbohydrate utilization and degradation

Background

Spore-forming Bacilli are Gram-positive bacteria commonly found in a variety of natural habitats, including soil, water and the gastro-intestinal (GI)-tract of animals. Isolates of various Bacillus species produce pigments, mostly carotenoids, with a putative protective role against UV irradiation and oxygen-reactive forms.

Results

We report the annotation of carbohydrate active enzymes (CAZymes) of two pigmented Bacilli isolated from the human GI-tract and belonging to the Bacillus indicus and B. firmus species. A high number of glycoside hydrolases (GHs) and carbohydrate binding modules (CBMs) were found in both isolates. A detailed analysis of CAZyme families, was performed and supported by growth data. Carbohydrates able to support growth as the sole carbon source negatively effected carotenoid formation in rich medium, suggesting that a catabolite repression-like mechanism controls carotenoid biosynthesis in both Bacilli. Experimental results on biofilm formation confirmed genomic data on the potentials of B. indicus HU36 to produce a levan-based biofilm, while mucin-binding and -degradation experiments supported genomic data suggesting the ability of both Bacilli to degrade mammalian glycans.

Conclusions

CAZy analyses of the genomes of the two pigmented Bacilli, compared to other Bacillus species and validated by experimental data on carbohydrate utilization, biofilm formation and mucin degradation, suggests that the two pigmented Bacilli are adapted to the intestinal environment and are suited to grow in and colonize the human gut.

Maturation of released spores is necessary for acquisition of full spore heat resistance during Bacillus subtilis sporulation

The first ∼10% of spores released from sporangia (early spores) during Bacillus subtilis sporulation were isolated, and their properties were compared to those of the total spores produced from the same culture. The early spores had significantly lower resistance to wet heat and hypochlorite than the total spores but identical resistance to dry heat and UV radiation. Early and total spores also had the same levels of core water, dipicolinic acid, and Ca and germinated similarly with several nutrient germinants. The wet heat resistance of the early spores could be increased to that of total spores if early spores were incubated in conditioned sporulation medium for ∼24 h at 37°C (maturation), and some hypochlorite resistance was also restored. The maturation of early spores took place in pH 8 buffer with Ca(2+) but was blocked by EDTA; maturation was also seen with early spores of strains lacking the CotE protein or the coat-associated transglutaminase, both of which are needed for normal coat structure. Nonetheless, it appears to be most likely that it is changes in coat structure that are responsible for the increased resistance to wet heat and hypochlorite upon early spore maturation.

Evolutionary history and functional characterization of three large genes involved in sporulation in Bacillus cereus group bacteria

The Bacillus cereus group of bacteria is a group of closely related species that are of medical and economic relevance, including B. anthracis, B. cereus, and B. thuringiensis. Bacteria from the Bacillus cereus group encode three large, highly conserved genes of unknown function (named crdA, crdB, and crdC) that are composed of 16 to 35 copies of a repeated domain of 132 amino acids at the protein level. Bioinformatic analysis revealed that there is a phylogenetic bias in the genomic distribution of these genes and that strains harboring all three large genes mainly belong to cluster III of the B. cereus group phylogenetic tree. The evolutionary history of the three large genes implicates gain, loss, duplication, internal deletion, and lateral transfer. Furthermore, we show that the transcription of previously identified antisense open reading frames in crdB is simultaneously regulated with its host gene throughout the life cycle in vitro, with the highest expression being at the onset of sporulation. In B. anthracis, different combinations of double- and triple-knockout mutants of the three large genes displayed slower and less efficient sporulation processes than the parental strain. Altogether, the functional studies suggest an involvement of these three large genes in the sporulation process.

Domains of BclA, the major surface glycoprotein of the B. cereus exosporium: glycosylation patterns and role in spore surface properties

The role of the BclA domains of B. cereus ATCC 14579 was investigated in order to understand the phenomena involved in the interfacial processes occurring between spores and inert surfaces. This was done by (i) creating deletions in the collagen-like region (CLR) and the C-terminal domain (CTD) of BclA, (ii) building BclA proteins with various lengths in the CLR and (iii) modifying the hydrophobic upper surface in the CTD. First, it was demonstrated that the CLR was substituted by three residues already reported in the CLR of B. anthracis, viz. rhamnose, 3-O-methyl-rhamnose, and GalNH(2) residues, while the CTD was also substituted by two additional glycosyl residues, viz. 2-O-methyl-rhamnose and 2,4-O-methyl-rhamnose. Regarding the properties of the spores, both CLR and CTD contributed to the adhesion of the spores, which was estimated by measuring the resistance to detachment of spores adhered to stainless steel plates). CLR and CTD also impacted the hydrophobic character and isoelectric point of the spores. It was then shown that the resistance to detachment of the spores was not affected by the physicochemical properties, but by the CLR length and the presence of hydrophobic amino acids on the CTD.

Efficient inhibition of germination of coat-deficient bacterial spores by multivalent metal cations, including terbium (Tb³+)

Release of dipicolinic acid (DPA) and its fluorescence with terbium (Tb(3+)) allow rapid measurement of the germination and viability of spores of Bacillus and Clostridium species. However, germination of coat-deficient Bacillus spores was strongly inhibited by Tb(3+) and some other multivalent cations. Tb(3+) also inhibited germination of coat-deficient Clostridium perfringens spores.

Proteins involved in formation of the outermost layer of Bacillus subtilis spores

To investigate the outermost structure of the Bacillus subtilis spore, we analyzed the accessibility of antibodies to proteins on spores of B. subtilis. Anti-green fluorescent protein (GFP) antibodies efficiently accessed GFP fused to CgeA or CotZ, which were previously assigned to the outermost layer termed the spore crust. However, anti-GFP antibodies did not bind to spores of strains expressing GFP fused to 14 outer coat, inner coat, or cortex proteins. Anti-CgeA antibodies bound to spores of wild-type and CgeA-GFP strains but not cgeA mutant spores. These results suggest that the spore crust covers the spore coat and is the externally exposed, outermost layer of the B. subtilis spore. We found that CotZ was essential for the spore crust to surround the spore but not for spore coat formation, indicating that CotZ plays a critical role in spore crust formation. In addition, we found that CotY-GFP was exposed on the surface of the spore, suggesting that CotY is an additional component of the spore crust. Moreover, the localization of CotY-GFP around the spore depended on CotZ, and CotY and CotZ depended on each other for spore assembly. Furthermore, a disruption of cotW affected the assembly of CotV-GFP, and a disruption of cotX affected the assembly of both CotV-GFP and CgeA-GFP. These results suggest that cgeA and genes in the cotVWXYZ cluster are involved in spore crust formation.

An unusual mechanism of isopeptide bond formation attaches the collagenlike glycoprotein BclA to the exosporium of Bacillus anthracis

The outermost exosporium layer of spores of Bacillus anthracis, the causative agent of anthrax, is comprised of a basal layer and an external hairlike nap. The nap includes filaments composed of trimers of the collagenlike glycoprotein BclA. Essentially all BclA trimers are tightly attached to the spore in a process requiring the basal layer protein BxpB (also called ExsFA). Both BclA and BxpB are incorporated into stable, high-molecular-mass complexes, suggesting that BclA is attached directly to BxpB. The 38-residue amino-terminal domain of BclA, which is normally proteolytically cleaved between residues 19 and 20, is necessary and sufficient for basal layer attachment. In this study, we demonstrate that BclA attachment occurs through the formation of isopeptide bonds between the free amino group of BclA residue A20 and a side chain carboxyl group of an acidic residue of BxpB. Ten of the 13 acidic residues of BxpB can participate in isopeptide bond formation, and at least three BclA polypeptide chains can be attached to a single molecule of BxpB. We also demonstrate that similar cross-linking occurs in vitro between purified recombinant BclA and BxpB, indicating that the reaction is spontaneous. The mechanism of BclA attachment, specifically, the formation of a reactive amino group by proteolytic cleavage and the promiscuous selection of side chain carboxyl groups of internal acidic residues, appears to be different from other known mechanisms for protein cross-linking through isopeptide bonds. Analogous mechanisms appear to be involved in the cross-linking of other spore proteins and could be found in unrelated organisms.

IMPORTANCE

Isopeptide bonds are protein modifications found throughout nature in which amide linkages are formed between functional groups of two amino acids, with at least one of the functional groups provided by an amino acid side chain. Isopeptide bonds generate cross-links within and between proteins that are necessary for proper protein structure and function. In this study, we discovered that BclA, the dominant structural protein of the external nap of Bacillus anthracis spores, is attached to the underlying exosporium basal layer protein BxpB via isopeptide bonds formed through a mechanism fundamentally different from previously described mechanisms of isopeptide bond formation. The most unusual features of this mechanism are the generation of a reactive amino group by proteolytic cleavage and promiscuous selection of acidic side chains. This mechanism, which apparently relies only on short peptide sequences in protein substrates, could be a general mechanism in vivo and adapted for protein cross-linking in vitro.

Role played by exosporium glycoproteins in the surface properties of Bacillus cereus spores and in their adhesion to stainless steel

Bacillus cereus spores are surrounded by a loose-fitting layer called the exosporium, whose distal part is mainly formed from glycoproteins. The role played by the exosporium glycoproteins of B. cereus ATCC 14579 (BclA and ExsH) was investigated by considering hydrophobicity and charge, as well as the properties of spore adhesion to stainless steel. The absence of BclA increased both the isoelectric point (IEP) and hydrophobicity of whole spores while simultaneously reducing the interaction between spores and stainless steel. However, neither the hydrophobicity nor the charge associated with BclA could explain the differences in the adhesion properties. Conversely, ExsH, another exosporium glycoprotein, did not play a significant role in spore surface properties. The monosaccharide analysis of B. cereus ATCC 14579 showed different glycosylation patterns on ExsH and BclA. Moreover, two specific glycosyl residues, namely, 2-O-methyl-rhamnose (2-Me-Rha) and 2,4-O-methyl-rhamnose (2,4-Me-Rha), were attached to BclA, in addition to the glycosyl residues already reported in B. anthracis.

The co-dependence of BxpB/ExsFA and BclA for proper incorporation into the exosporium of Bacillus anthracis

The outermost layer of the Bacillus anthracis spore consists of an exosporium comprised of two distinct layers, an outer hair-like nap layer and an internal basal layer. The hair-like nap is primarily comprised of the glycosylated collagen-like protein BclA. BclA is found in a trimeric form in close association with many other exosporium proteins in high-molecular weight complexes. We previously had characterized an N-terminal sequence of BclA that is sufficient for incorporation into the exosporium. Here we utilized site-directed mutagenesis to identify BclA residues critical to two steps in this process, positioning of the protein at the site of the developing exosporium basal layer and stable incorporation which includes a proteolytic cleavage of BclA after residue 19. The BxpB (ExsFA) protein is known to be important for proper incorporation of BclA onto the exosporium. BxpB and BclA were found to be expressed at the same time in sporulating cells of B. anthracis and immediately colocalize to high-molecular weight complexes. The BxpB protein was found to be in close proximity to the BclA NTD. BxpB and BclA are co-dependent for exosporium incorporation, with the BclA NTD being sufficient to deliver BxpB to the exosporium.

Effect of radioprotective agents in sporulation medium on Bacillus subtilis spore resistance to hydrogen peroxide, wet heat and germicidal and environmentally relevant UV radiation

AIMS

To determine the effects of cysteine, cystine, proline and thioproline as sporulation medium supplements on Bacillus subtilis spore resistance to hydrogen peroxide (H(2)O(2)), wet heat, and germicidal 254 nm and simulated environmental UV radiation.

METHODS AND RESULTS

Bacillus subtilis spores were prepared in a chemically defined liquid medium, with and without supplementation of cysteine, cystine, proline or thioproline. Spores produced with thioproline, cysteine or cystine were more resistant to environmentally relevant UV radiation at 280-400 and 320-400 nm, while proline supplementation had no effect. Spores prepared with cysteine, cystine or thioproline were also more resistant to H(2)O(2) but not to wet heat or 254-nm UV radiation. The increases in spore resistance attributed to the sporulation supplements were eliminated if spores were chemically decoated.

CONCLUSIONS

Supplementation of sporulation medium with cysteine, cystine or thioproline increases spore resistance to solar UV radiation reaching the Earth's surface and to H(2)O(2). These effects were eliminated if the spores were decoated, indicating that alterations in coat proteins by different sporulation conditions can affect spore resistance to some agents.

SIGNIFICANCE AND IMPACT OF THE STUDY

This study provides further evidence that the composition of the sporulation medium can have significant effects on B. subtilis spore resistance to UV radiation and H(2)O(2). This knowledge provides further insight into factors influencing spore resistance and inactivation.

An evaluation of commercial DNA extraction kits for the isolation of bacterial spore DNA from soil

AIMS

To evaluate six commercial DNA extraction kits for their ability to isolate PCR-quality DNA from Bacillus spores in various soil samples.

METHODS AND RESULTS

Three soils were inoculated with various amounts of Bacillus cereus spores to simulate an outbreak or intentional release of the threat agent Bacillus anthracis. DNA was isolated from soil samples using six commercial DNA extraction kits. Extraction and purification efficiencies were assessed using a duplex real-time PCR assay that included an internal positive control. The FastDNA(®) SPIN kit for Soil showed the highest DNA extraction yield, while the E.Z.N.A.(®) Soil DNA and PowerSoil(®) DNA Isolation kits showed the highest efficiencies in removing PCR inhibitors from loam soil extracts.

CONCLUSIONS

The results of this study suggest that commercially available extraction kits can be used to extract PCR-quality DNA from bacterial spores in soil. The selection of an appropriate extraction kit should depend on the characteristics of the soil sample and the intended downstream application.

SIGNIFICANCE AND IMPACT OF THE STUDY

  The results of this study aid in the selection of an appropriate DNA extraction kit for a given soil sample. Its application could expedite sample processing for real-time PCR detection of a pathogen in soil.

Current physical and SDS extraction methods do not efficiently remove exosporium proteins from Bacillus anthracis spores

Biochemical studies of the outermost spore layers of the Bacillus cereus family are hindered by difficulties in efficient dispersal of the external spore layers and difficulties in dissociating protein complexes that comprise the exosporium layer. Detergent and physical methods have been utilized to disrupt the exosporium layer. Herein we compare commonly used SDS extraction buffers used to extract spore proteins and demonstrate the incomplete extractability of the exosporium layer by these methods. Sonication and bead beating methods for exosporium layer removal were also examined. A combination of genetic and physical methods is the most effective for isolating proteins found in the spore exosporium.

Hierarchical evolution of the bacterial sporulation network

Genome sequencing of multiple species makes it possible to understand the main principles behind the evolution of developmental regulatory networks. It is especially interesting to analyze the evolution of well-defined model systems in which conservation patterns can be directly correlated with the functional roles of various network components. Endospore formation (sporulation), extensively studied in Bacillus subtilis, is driven by such a model bacterial network of cellular development and differentiation. In this review, we analyze the evolution of the sporulation network in multiple endospore-forming bacteria. Importantly, the network evolution is not random but primarily follows the hierarchical organization and functional logic of the sporulation process. Specifically, the sporulation sigma factors and the master regulator of sporulation, Spo0A, are conserved in all considered spore-formers. The sequential activation of these global regulators is also strongly conserved. The feed-forward loops, which are likely used to fine-tune waves of gene expression within regulatory modules, show an intermediate level of conservation. These loops are less conserved than the sigma factors but significantly more than the structural sporulation genes, which form the lowest level in the functional and evolutionary hierarchy of the sporulation network. Interestingly, in spore-forming bacteria, gene regulation is more conserved than gene presence for sporulation genes, while the opposite is true for non-sporulation genes. The observed patterns suggest that, by understanding the functional organization of a developmental network in a model organism, it is possible to understand the logic behind the evolution of this network in multiple related species.

Germination of spores of Bacillales and Clostridiales species: mechanisms and proteins involved

Under conditions that are not conducive to growth, such as nutrient depletion, many members of the orders Bacillales and Clostridiales can sporulate, generating dormant and resistant spores that can survive in the absence of nutrients for years under harsh conditions. However, when nutrients are again present, these spores can return to active growth through the process of germination. Many of the components of the spore germination machinery are conserved between spore forming members of the Bacillales and Clostridiales orders. However, recent studies have revealed significant differences between the germination of spores of Clostridium perfringens and that of spores of a number of Bacillus species, both in the proteins and in the signal transduction pathways involved. In this review, the roles of components of the spore germination machinery of C. perfringens and several Bacillus species and the bioinformatic analysis of germination proteins in the Bacillales and Clostridiales orders are discussed and models for the germination of spores of these two orders are proposed.

Protein localization by recognition of membrane curvature

Bacteria often sort proteins to specific subcellular locations, but many of the chemical beacons that specify those sites and subsequently recruit proteins have not been identified. Recent reports suggest that some bacterial proteins localize to specific subcellular sites by recognizing either convex or concave membrane curvature. Thus, degrees of membrane curvature, dictated by the shape of the cell, can define a geometric cue for the recruitment of curvature-sensing proteins.

Characterization of the enzymes encoded by the anthrose biosynthetic operon of Bacillus anthracis

Bacillus anthracis spores, the etiological agents of anthrax, possess a loosely fitting outer layer called the exosporium that is composed of a basal layer and an external hairlike nap. The filaments of the nap are formed by trimers of the collagenlike glycoprotein BclA. Multiple pentasaccharide and trisaccharide side chains are O linked to BclA. The nonreducing terminal residue of the pentasaccharide side chain is the unusual sugar anthrose. A plausible biosynthetic pathway for anthrose biosynthesis has been proposed, and an antABCD operon encoding four putative anthrose biosynthetic enzymes has been identified. In this study, we genetically and biochemically characterized the activities of these enzymes. We also used mutant B. anthracis strains to determine the effects on BclA glycosylation of individually inactivating the genes of the anthrose operon. The inactivation of antA resulted in the appearance of BclA pentasaccharides containing anthrose analogs possessing shorter side chains linked to the amino group of the sugar. The inactivation of antB resulted in BclA being replaced with only trisaccharides, suggesting that the enzyme encoded by the gene is a dTDP-β-L-rhamnose α-1,3-L-rhamnosyl transferase that attaches the fourth residue of the pentasaccharide side chain. The inactivation of antC and antD resulted in the disappearance of BclA pentasaccharides and the appearance of a tetrasaccharide lacking anthrose. These phenotypes are entirely consistent with the proposed roles for the antABCD-encoded enzymes in anthrose biosynthesis. Purified AntA was then shown to exhibit β-methylcrotonyl-coenzyme A (CoA) hydratase activity, as we predicted. Similarly, we confirmed that purified AntC had aminotransferase activity and that purified AntD displayed N-acyltransferase activity.

Display of recombinant proteins on Bacillus subtilis spores, using a coat-associated enzyme as the carrier

The display of proteins such as feed enzymes at the surface of bacterial spore systems has a great potential use for animal feed. Feed enzymes increase the digestibility of nutrients, leading to greater efficiency in the manufacturing of animal products and minimizing the environmental impact of increased animal production. To deliver their full potential in the gut, feed enzymes must survive the harsh conditions of the feed preparation and the gastrointestinal tract. The well-documented resistance of spores to harsh environments, together with the ability to use proteins that compose the spore as carriers for the display of passenger proteins, suggests that spores could be used as innovative tools to improve the formulation of bioactive molecules. Although some successful examples have been reported, in which abundant structural proteins of the Bacillus subtilis spore outer-coat layer were used as carriers for the display of recombinant proteins, only one convincing example resulted in the display of functional enzymes. In addition, no examples are available about the use of an inner-coat protein for the display of an active passenger enzyme. In our study, we show that the inner-coat oxalate decarboxylase (OxdD) can expose an endogenous phytase, a commonly used feed enzyme for monogastric animals, in an active form at the spore surface. Importantly, despite the higher abundance of CotG outer-coat protein, an OxdD-Phy fusion was more represented at the spore surface. The potential of OxdD as a carrier protein is further documented through the spore display of a bioactive heterologous passenger, the tetrameric beta-glucuronidase enzyme from Escherichia coli.

A novel spore protein, ExsM, regulates formation of the exosporium in Bacillus cereus and Bacillus anthracis and affects spore size and shape

Bacillus cereus spores are assembled with a series of concentric layers that protect them from a wide range of environmental stresses. The outermost layer, or exosporium, is a bag-like structure that interacts with the environment and is composed of more than 20 proteins and glycoproteins. Here, we identified a new spore protein, ExsM, from a beta-mercaptoethanol extract of B. cereus ATCC 4342 spores. Subcellular localization of an ExsM-green fluorescent protein (GFP) protein revealed a dynamic pattern of fluorescence that follows the site of formation of the exosporium around the forespore. Under scanning electron microscopy, exsM null mutant spores were smaller and rounder than wild-type spores, which had an extended exosporium (spore length for the wt, 2.40 +/- 0.56 microm, versus that for the exsM mutant, 1.66 +/- 0.38 microm [P < 0.001]). Thin-section electron microscopy revealed that exsM mutant spores were encased by a double-layer exosporium, both layers of which were composed of a basal layer and a hair-like nap. Mutant exsM spores were more resistant to lysozyme treatment and germinated with higher efficiency than wild-type spores, and they had a delay in outgrowth. Insertional mutagenesis of exsM in Bacillus anthracis DeltaSterne resulted in a partial second exosporium and in smaller spores. In all, these findings suggest that ExsM plays a critical role in the formation of the exosporium.

Biosynthesis of a new UDP-sugar, UDP-2-acetamido-2-deoxyxylose, in the human pathogen Bacillus cereus subspecies cytotoxis NVH 391-98

We have identified an operon and characterized the functions of two genes from the severe food-poisoning bacterium, Bacillus cereus subsp. cytotoxis NVH 391-98, that are involved in the synthesis of a unique UDP-sugar, UDP-2-acetamido-2-deoxyxylose (UDP-N-acetyl-xylosamine, UDP-XylNAc). UGlcNAcDH encodes a UDP-N-acetyl-glucosamine 6-dehydrogenase, converting UDP-N-acetylglucosamine (UDP-GlcNAc) to UDP-N-acetyl-glucosaminuronic acid (UDP-GlcNAcA). The second gene in the operon, UXNAcS, encodes a distinct decarboxylase not previously described in the literature, which catalyzes the formation of UDP-XylNAc from UDP-GlcNAcA in the presence of exogenous NAD(+). UXNAcS is specific and cannot utilize UDP-glucuronic acid and UDP-galacturonic acid as substrates. UXNAcS is active as a dimer with catalytic efficiency of 7 mM(-1) s(-1). The activity of UXNAcS is completely abolished by NADH but unaffected by UDP-xylose. A real-time NMR-based assay showed unambiguously the dual enzymatic conversions of UDP-GlcNAc to UDP-GlcNAcA and subsequently to UDP-XylNAc. From the analyses of all publicly available sequenced genomes, it appears that UXNAcS is restricted to pathogenic Bacillus species, including Bacillus anthracis and Bacillus thuringiensis. The identification of UXNAcS provides insight into the formation of UDP-XylNAc. Understanding the metabolic pathways involved in the utilization of this amino-sugar may allow the development of drugs to combat and eradicate the disease.

Genomics, evolution, and crystal structure of a new family of bacterial spore kinases

Bacterial spore formation is a complex process of fundamental relevance to biology and human disease. The spore coat structure is complex and poorly understood, and the roles of many of the protein components remain unclear. We describe a new family of spore coat proteins, the bacterial spore kinases (BSKs), and the first crystal structure of a BSK, YtaA (CotI) from Bacillus subtilis. BSKs are widely distributed in spore-forming Bacillus and Clostridium species, and have a dynamic evolutionary history. Sequence and structure analyses indicate that the BSKs are CAKs, a prevalent group of small molecule kinases in bacteria that is distantly related to the eukaryotic protein kinases. YtaA has substantial structural similarity to CAKs, but also displays distinctive features that broaden our understanding of the CAK group. Evolutionary constraint analysis of the protein surfaces indicates that members of the BSK family have distinct clade-conserved patterns in the substrate binding region, and probably bind and phosphorylate distinct targets. Several classes of BSKs have apparently independently lost catalytic activity to become pseudokinases, indicating that the family also has a major noncatalytic function. Proteins 2010. © 2009 Wiley-Liss, Inc.

A distance-weighted interaction map reveals a previously uncharacterized layer of the Bacillus subtilis spore coat

Bacillus subtilis spores are encased in a protein assembly called the spore coat that is made up of at least 70 different proteins. Conventional electron microscopy shows the coat to be organized into two distinct layers. Because the coat is about as wide as the theoretical limit of light microscopy, quantitatively measuring the localization of individual coat proteins within the coat is challenging. We used fusions of coat proteins to green fluorescent protein to map genetic dependencies for coat assembly and to define three independent subnetworks of coat proteins. To complement the genetic data, we measured coat protein localization at subpixel resolution and integrated these two data sets to produce a distance-weighted genetic interaction map. Using these data, we predict that the coat comprises at least four spatially distinct layers, including a previously uncharacterized glycoprotein outermost layer that we name the spore crust. We found that crust assembly depends on proteins we predicted to localize to the crust. The crust may be conserved in all Bacillus spores and may play critical functions in the environment.

Growth, cell division and sporulation in mycobacteria

Bacteria have the ability to adapt to different growth conditions and to survive in various environments. They have also the capacity to enter into dormant states and some bacteria form spores when exposed to stresses such as starvation and oxygen deprivation. Sporulation has been demonstrated in a number of different bacteria but Mycobacterium spp. have been considered to be non-sporulating bacteria. We recently provided evidence that Mycobacterium marinum and likely also Mycobacterium bovis bacillus Calmette–Guérin can form spores. Mycobacterial spores were detected in old cultures and our findings suggest that sporulation might be an adaptation of lifestyle for mycobacteria under stress. Here we will discuss our current understanding of growth, cell division, and sporulation in mycobacteria.

Direct and indirect control of late sporulation genes by GerR of Bacillus subtilis

GerR is a sporulation-specific transcriptional factor of Bacillus subtilis that has been identified as a negative regulator of genes transcribed by sigma(E)-containing RNA polymerase and as a positive effector of the expression of three late sporulation genes. Here we confirmed that gerR transcription is dependent on sigma(E)-containing RNA polymerase but also observed that it requires the transcriptional regulator SpoIIID. The study of the role of GerR in regulating the expression of several late sporulation genes allowed us to observe that its effect is strongly positive on spoVIF, cotC, and cotG, weakly positive on cotB, and negative on cotU. The results of chromatin immunoprecipitation (ChIP) experiments indicated that GerR binds to the promoter regions of some, but not all, of the GerR-controlled genes, leading us to propose that GerR controls late sporulation genes in two ways: (i) directly, by acting on the transcription of cotB, cotU and spoVIF; and (ii) indirectly, through the activation of SpoVIF, which stabilizes the transcriptional activator GerE and consequently induces the expression of the GerE-dependent genes cotC and cotG.

Global transcriptome analysis of spore formation in Myxococcus xanthus reveals a locus necessary for cell differentiation

Background

Myxococcus xanthus is a Gram negative bacterium that can differentiate into metabolically quiescent, environmentally resistant spores. Little is known about the mechanisms involved in differentiation in part because sporulation is normally initiated at the culmination of a complex starvation-induced developmental program and only inside multicellular fruiting bodies. To obtain a broad overview of the sporulation process and to identify novel genes necessary for differentiation, we instead performed global transcriptome analysis of an artificial chemically-induced sporulation process in which addition of glycerol to vegetatively growing liquid cultures of M. xanthus leads to rapid and synchronized differentiation of nearly all cells into myxospore-like entities.

Results

Our analyses identified 1 486 genes whose expression was significantly regulated at least two-fold within four hours of chemical-induced differentiation. Most of the previously identified sporulation marker genes were significantly upregulated. In contrast, most genes that are required to build starvation-induced multicellular fruiting bodies, but which are not required for sporulation per se, were not significantly regulated in our analysis. Analysis of functional gene categories significantly over-represented in the regulated genes, suggested large rearrangements in core metabolic pathways, and in genes involved in protein synthesis and fate. We used the microarray data to identify a novel operon of eight genes that, when mutated, rendered cells unable to produce viable chemical- or starvation-induced spores. Importantly, these mutants displayed no defects in building fruiting bodies, suggesting these genes are necessary for the core sporulation process. Furthermore, during the starvation-induced developmental program, these genes were expressed in fruiting bodies but not in peripheral rods, a subpopulation of developing cells which do not sporulate.

Conclusions

These results suggest that microarray analysis of chemical-induced spore formation is an excellent system to specifically identify genes necessary for the core sporulation process of a Gram negative model organism for differentiation.

ExsB, an unusually highly phosphorylated protein required for the stable attachment of the exosporium of Bacillus anthracis

The outermost layer of the Bacillus anthracis spore, the exosporium, is composed of a paracrystalline basal layer and an external hair-like nap. The nap is formed from a single collagen-like glycoprotein, while the basal layer contains many different proteins, including a 186-amino acid protein called ExsB. In this study, we discovered that ExsB is unusually highly phosphorylated, with at least 14 of its 19 threonine residues modified. The phosphorylated threonines are included in seven contiguous approximately 12-residue imperfect repeats, which presumably contain kinase recognition sequences. We demonstrated that a B. anthracis DeltaexsB mutant unable to synthesize ExsB produced spores with an exosporium that was readily sloughed, indicating that ExsB was required for stable exosporium attachment. This unstable exosporium also lacked the enzyme alanine racemase, which is normally tightly associated with the exosporium. Additionally, purified DeltaexsB spores lacking a visible exosporium were devoid of most exosporium proteins but, surprisingly, retained the putative exosporium proteins BxpC and CotB-1. Finally, we showed that transcription of the exsB gene occurred only during the late stages of sporulation, and we used an active and phosphorylated ExsB-EGFP fusion protein to monitor ExsB localization to wild-type and DeltabxpB mutant exosporia.

Viability and surface properties of spores subjected to a cleaning-in-place procedure: consequences on their ability to contaminate surfaces of equipment

This study was designed to evaluate how conditions encountered by spores during cleaning-in-place (CIP) procedures affected their surface properties, their viability and ability to contaminate materials. Spores from five Bacillus cereus strains were treated with NaOH at high temperature. Results revealed that high temperatures (exceeding 60 degrees C) and NaOH concentrations (over 0.5%) were required to significantly decrease spore viability (3-5log decrease). In these conditions, modifications were also clearly observed by microscopy to various surface structures of spores (appendages, exosporium, and especially to the hair-like nap) but also to their coat. Therefore, the ability of culturable spores to adhere decreased for the majority of strains tested. We then demonstrated that spores in suspension in NaOH could adhere to surfaces of a CIP rig and that the contamination level was controlled by flow pattern. Consequently, re-adhesion along the processing line might occur during CIP procedures and this phenomenon must be taken into account when defining cleaning strategies.

Bacillus probiotics

Bacterial spore formers are being used as probiotic supplements for use in animal feeds, for human dietary supplements as well as in registered medicines. Their heat stability and ability to survive the gastric barrier makes them attractive as food additives and this use is now being taken forward. While often considered soil organisms this conception is misplaced and Bacilli should be considered as gut commensals. This review summarises the current use of Bacillus species as probiotics, their safety, mode of action as well as their commercial applications.

Oral vaccine delivery by recombinant spore probiotics

Over the past few decades, advancements in molecular and cell biology have allowed scientists to identify a large number of new antigens from a variety of viral and bacterial pathogens. However, successful development of these antigens into effective vaccines strongly relies on delivery systems able to avoid the rapid loss of biological activity that often impairs antigen efficacy. Various delivery systems have been proposed as alternative vaccine vehicles, from live microorganisms to nanoparticles, and all of them have shown advantages but also drawbacks. The bacterial spore is a quiescent cell form that, as a vaccine vehicle, may conjugate some advantages of live microorganisms with those of synthetic nanoparticles and that has recently been proposed as a potentially powerful tool to deliver antigens to mucosal surfaces. Here we review the use of bacterial spores as a delivery system for mucosal immunizations. We will first analyze the nature of the interaction between wild type spores and the gut-associated lymphoid tissue and then address the immune responses that are induced by oral immunizations with recombinant spores displaying heterologous antigens.

Constructing fluorogenic Bacillus spores (F-spores) via hydrophobic decoration of coat proteins

Background

Bacterial spores are protected by a coat consisting of about 60 different proteins assembled as a biochemically complex structure with intriguing morphological and mechanical properties. Historically, the coat has been considered a static structure providing rigidity and mainly acting as a sieve to exclude exogenous large toxic molecules, such as lytic enzymes. Over recent years, however, new information about the coat's architecture and function have emerged from experiments using innovative tools such as automated scanning microscopy, and high resolution atomic force microscopy.

Principal Findings

Using thin-section electron microscopy, we found that the coat of Bacillus spores has topologically specific proteins forming a layer that is identifiable because it spontaneously becomes decorated with hydrophobic fluorogenic probes from the milieu. Moreover, spores with decorated coat proteins (termed F-spores) have the unexpected attribute of responding to external germination signals by generating intense fluorescence. Fluorescence data from diverse experimental designs, including F-spores constructed from five different Bacilli species, indicated that the fluorogenic ability of F-spores is under control of a putative germination-dependent mechanism.

Conclusions

This work uncovers a novel attribute of spore-coat proteins that we exploited to decorate a specific layer imparting germination-dependent fluorogenicity to F-spores. We expect that F-spores will provide a model system to gain new insights into structure/function dynamics of spore-coat proteins.

Role of the gerP operon in germination and outgrowth of Bacillus anthracis spores

Germination of Bacillus anthracis spores occurs when nutrients such as amino acids or purine nucleosides stimulate specific germinant receptors located in the spore inner membrane. The gerP(ABCDEF) operon has been suggested to play a role in facilitating the interaction between germinants and their receptors in spores of Bacillus subtilis and Bacillus cereus. B. anthracis mutants containing deletions in each of the six genes belonging to the orthologue of the gerP(ABCDEF) operon, or deletion of the entire operon, were tested for their ability to germinate. Deletion of the entire gerP operon resulted in a significant delay in germination in response to nutrient germinants. These spores eventually germinated to levels equivalent to wild-type, suggesting that an additional entry point for nutrient germinants may exist. Deletions of each individual gene resulted in a similar phenotype, with the exception of DeltagerPF, which showed no obvious defect. The removal of two additional gerPF-like orthologues was necessary to achieve the germination defect observed for the other mutants. Upon physical removal of the spore coat, the mutant lacking the full gerP operon no longer exhibited a germination defect, suggesting that the GerP proteins play a role in spore coat permeability. Additionally, each of the gerP mutants exhibited a severe defect in calcium-dipicolinic acid (Ca-DPA)-dependent germination, suggesting a role for the GerP proteins in this process. Collectively, these data implicate all GerP proteins in the early stages of spore germination.

Expression and display of UreA of Helicobacter acinonychis on the surface of Bacillus subtilis spores

Background

The bacterial endospore (spore) has recently been proposed as a new surface display system. Antigens and enzymes have been successfully exposed on the surface layers of the Bacillus subtilis spore, but only in a few cases the efficiency of expression and the effective surface display and have been determined. We used this heterologous expression system to produce the A subunit of the urease of the animal pathogen Helicobater acinonychis. Ureases are multi-subunit enzymes with a central role in the virulence of various bacterial pathogens and necessary for colonization of the gastric mucosa by the human pathogen H. pylori. The urease subunit UreA has been recognized as a major antigen, able to induce high levels of protection against challenge infections.

Results

We expressed UreA from H. acinonychis on the B. subtilis spore coat by using three different spore coat proteins as carriers and compared the efficiency of surface expression and surface display obtained with the three carriers. A combination of western-, dot-blot and immunofluorescence microscopy allowed us to conclude that, when fused to CotB, UreA is displayed on the spore surface (ca. 1 × 10³ recombinant molecules per spore), whereas when fused to CotC, although most efficiently expressed (7-15 × 10³ recombinant molecules per spore) and located in the coat layer, it is not displayed on the surface. Experiments with CotG gave results similar to those with CotC, but the CotG-UreA recombinant protein appeared to be partially processed.

Conclusion

UreA was efficiently expressed on the spore coat of B. subtilis when fused to CotB, CotC or CotG. Of these three coat proteins CotC allows the highest efficiency of expression, whereas CotB is the most appropriate for the display of heterologous proteins on the spore surface.

The silicon layer supports acid resistance of Bacillus cereus spores

Silicon (Si) is considered to be a "quasiessential" element for most living organisms. However, silicate uptake in bacteria and its physiological functions have remained obscure. We observed that Si is deposited in a spore coat layer of nanometer-sized particles in Bacillus cereus and that the Si layer enhances acid resistance. The novel acid resistance of the spore mediated by Si encapsulation was also observed in other Bacillus strains, representing a general adaptation enhancing survival under acidic conditions.

Sequence motifs and proteolytic cleavage of the collagen-like glycoprotein BclA required for its attachment to the exosporium of Bacillus anthracis

Bacillus anthracis spores are enclosed by an exosporium comprised of a basal layer and an external hair-like nap. The filaments of the nap are composed of trimers of the collagen-like glycoprotein BclA. The attachment of essentially all BclA trimers to the exosporium requires the basal layer protein BxpB, and both proteins are included in stable high-molecular-mass exosporium complexes. BclA contains a proteolytically processed 38-residue amino-terminal domain (NTD) that is essential for basal-layer attachment. In this report, we identify three NTD submotifs (SM1a, SM1b, and SM2, located within residues 21 to 33) that are important for BclA attachment and demonstrate that residue A20, the amino-terminal residue of processed BclA, is not required for attachment. We show that the shortest NTD of BclA-or of a recombinant protein-sufficient for high-level basal-layer attachment is a 10-residue motif consisting of an initiating methionine, an apparently arbitrary second residue, SM1a or SM1b, and SM2. We also demonstrate that cleavage of the BclA NTD is necessary for efficient attachment to the basal layer and that the site of cleavage is somewhat flexible, at least in certain mutant NTDs. Finally, we propose a mechanism for BclA attachment and discuss the possibility that analogous mechanisms are involved in the attachment of many different collagen-like proteins of B. anthracis and closely related Bacillus species.

Bacillus anthracis and Bacillus subtilis spore surface properties and transport

Effective decontamination of environments contaminated by Bacillus spores remains a significant challenge since Bacillus spores are highly resistant to killing and could plausibly adhere to many non-biological as well as biological surfaces. Decontamination of Bacillus spores can be significantly improved if the chemical basis of spore adherence is understood. In this research, we investigated the surface adhesive properties of Bacillus subtilis and Bacillus anthracis spores. The spore thermodynamic properties obtained from contact angle measurements indicated that both species were monopolar with a preponderance of electron-donating potential. This was also the case for spores of both species missing their outer layers, due to mutation. Transport of wild type and mutant spores of these two species was further analyzed in silica sand under unsaturated water conditions. A two-region solute transport model was used to simulate the spore transport with the assumption that the spore retention occurred within the immobile region only. Bacillus spore adhesion to the porous media was related to the interactions between the spores and the porous media. Our data indicated that spore surface structures played important roles in spore surface properties, since mutant spores missing outer layers had different surface thermodynamic and transport properties as compared to wild type spores. The changes in surface thermodynamic properties were further evidenced by infrared spectroscopy analysis.

CotE binds to CotC and CotU and mediates their interaction during spore coat formation in Bacillus subtilis

CotE is a morphogenic protein that controls the assembly of the coat, the proteinaceous structure that surrounds and protects the spore of Bacillus subtilis. CotE has long been thought to interact with several outer coat components, but such interactions were hypothesized from genetic experiment results and have never been directly demonstrated. To study the interaction of CotE with other coat components, we focused our attention on CotC and CotU, two outer coat proteins known to be under CotE control and to form a heterodimer. We report here the results of pull-down experiments that provide the first direct evidence that CotE contacts other coat components. In addition, coexpression experiments demonstrate that CotE is needed and sufficient to allow formation of the CotC-CotU heterodimer in a heterologous host.