Understanding Starch Structure: Recent Progress

Relationship between structure and physicochemical properties of ginkgo starches from seven cultivars

The structures and physicochemical properties of ginkgo starches from seven cultivars were investigated and their relationships analyzed. The ginkgo starches had oval or irregular shapes, size distributions with a unimodal peak, and an A-type crystal pattern. The fine structures, crystalline structures, and physicochemical properties varied significantly among these ginkgo starches. Pearson correlation analysis and a PCA loading plot indicated that amylopectin A-chains and amylose had negative effects on the IR ratio, I_max, and D, while amylopectin B-chains had a clear positive effect on the relative crystallinity. Furthermore, the amylopectin short B1-chains and long B-chains contributed amorphous and single-helix structures, respectively. The thermal properties of the ginkgo starches were mainly influenced by the amylopectin B-chains and I_max, while the pasting properties were mainly influenced by amylopectin B-chains and helical structures. These results indicated that the starch fine structures and crystalline structures had significant effects on the physicochemical properties.

Polysaccharide-Based Injection Matrix for Serial Crystallography

Serial crystallography (SX) provides an opportunity to observe the molecular dynamics of macromolecular structures at room temperature via pump-probe studies. The delivery of crystals embedded in a viscous medium via an injector or syringe is widely performed in synchrotrons or X-ray free-electron laser facilities with low repetition rates. Various viscous media have been developed; however, there are cases in which the delivery material undesirably interacts chemically or biologically with specific protein samples, or changes the stability of the injection stream, depending on the crystallization solution. Therefore, continued discovery and characterization of new delivery media is necessary for expanding future SX applications. Here, the preparation and characterization of new polysaccharide (wheat starch (WS) and alginate)-based sample delivery media are introduced for SX. Crystals embedded in a WS or alginate injection medium showed a stable injection stream at a flow rate of < 200 nL/min and low-level X-ray background scattering similar to other hydrogels. Using these media, serial millisecond crystallography (SMX) was performed, and the room temperature crystal structures of glucose isomerase and lysozyme were determined at 1.9–2.0 Å resolutions. WS and alginate will allow an expanded application of sample delivery media in SX experiments.

Starch: A Flexible, Adaptable Carbon Store Coupled to Plant Growth

Research in the past decade has uncovered new and surprising information about the pathways of starch synthesis and degradation. This includes the discovery of previously unsuspected protein families required both for processes and for the long-sought mechanism of initiation of starch granules. There is also growing recognition of the central role of leaf starch turnover in making carbon available for growth across the day-night cycle. Sophisticated systems-level control mechanisms involving the circadian clock set rates of nighttime starch mobilization that maintain a steady supply of carbon until dawn and modulate partitioning of photosynthate into starch in the light, optimizing the fraction of assimilated carbon that can be used for growth. These discoveries also uncover complexities: Results from experiments with Arabidopsis leaves in conventional controlled environments are not necessarily applicable to other organs or species or to growth in natural, fluctuating environments.

Characteristics of pasting properties and morphology changes of rice starch and flour under different heating modes

The pasting behavior of rice starch and its relationship with cooking properties of rice have been extensively studied. However, the viscosity changes of rice starch and flour under conventional cooking mode and high temperature and high pressure (HTHP) mode remain unknown. In this study, three typical rice starches and seven rice flours of different types and varieties were used to evaluate the effect of cooking modes on their pasting behaviors. A detailed discussion about the relationships among chemical composition, thermal properties, and crystallinity were conducted to explain the different pasting behaviors of the rice samples. The pasting behavior of rice starch was found to be similar with rice flour under standard and conventional heating modes, while remarkably different when treated at different HTHP levels, especially for sticky rice flour. The morphological changes of rice samples at 95 °C and 120 °C confirmed that high temperature long time heating caused extending of molecules, which exhibited layered structure at 120 °C. The rice flour samples showed different morphologies after heating at different modes due to varied amylose content and crystallinity, which contributed to different pasting behavior. These results provide useful information for developing strategies to control rice cooking and improve eating quality.

Polyglucosan body structure in Lafora disease

Abnormal carbohydrate structures known as polyglucosan bodies (PGBs) are associated with neurological disorders, glycogen storage diseases (GSDs), and aging. A hallmark of the GSD Lafora disease (LD), a fatal childhood epilepsy caused by recessive mutations in the EPM2A or EPM2B genes, are cytoplasmic PGBs known as Lafora bodies (LBs). LBs result from aberrant glycogen metabolism and drive disease progression. They are abundant in brain, muscle and heart of LD patients and Epm2a^-/- and Epm2b^-/- mice. LBs and PGBs are histologically reminiscent of starch, semicrystalline carbohydrates synthesized for glucose storage in plants. In this study, we define LB architecture, tissue-specific differences, and dynamics. We propose a model for how small polyglucosans aggregate to form LBs. LBs are very similar to PGBs of aging and other neurological disorders, and so these studies have direct relevance to the general understanding of PGB structure and formation.

Microscopic Techniques for the Analysis of Micro and Nanostructures of Biopolymers and Their Derivatives

Natural biopolymers, a class of materials extracted from renewable sources, is garnering interest due to growing concerns over environmental safety; biopolymers have the advantage of biocompatibility and biodegradability, an imperative requirement. The synthesis of nanoparticles and nanofibers from biopolymers provides a green platform relative to the conventional methods that use hazardous chemicals. However, it is challenging to characterize these nanoparticles and fibers due to the variation in size, shape, and morphology. In order to evaluate these properties, microscopic techniques such as optical microscopy, atomic force microscopy (AFM), and transmission electron microscopy (TEM) are essential. With the advent of new biopolymer systems, it is necessary to obtain insights into the fundamental structures of these systems to determine their structural, physical, and morphological properties, which play a vital role in defining their performance and applications. Microscopic techniques perform a decisive role in revealing intricate details, which assists in the appraisal of microstructure, surface morphology, chemical composition, and interfacial properties. This review highlights the significance of various microscopic techniques incorporating the literature details that help characterize biopolymers and their derivatives.

Expression of starch-binding factor CBM20 in barley plastids controls the number of starch granules and the level of CO2 fixation

The biosynthesis of starch granules in plant plastids is coordinated by the orchestrated action of transferases, hydrolases, and dikinases. These enzymes either contain starch-binding domain(s) themselves, or are dependent on direct interactions with co-factors containing starch-binding domains. As a means to competitively interfere with existing starch-protein interactions, we expressed the protein module Carbohydrate-Binding Motif 20 (CBM20), which has a very high affinity for starch, ectopically in barley plastids. This interference resulted in an increase in the number of starch granules in chloroplasts and in formation of compound starch granules in grain amyloplasts, which is unusual for barley. More importantly, we observed a photosystem-independent inhibition of CO2 fixation, with a subsequent reduced growth rate and lower accumulation of carbohydrates with effects throughout the metabolome, including lower accumulation of transient leaf starch. Our results demonstrate the importance of endogenous starch-protein interactions for controlling starch granule morphology and number, and plant growth, as substantiated by a metabolic link between starch-protein interactions and control of CO2 fixation in chloroplasts.

Keratin Associations with Synthetic, Biosynthetic and Natural Polymers: An Extensive Review

Among the biopolymers from animal sources, keratin is one the most abundant, with a major contribution from side stream products from cattle, ovine and poultry industry, offering many opportunities to produce cost-effective and sustainable advanced materials. Although many reviews have discussed the application of keratin in polymer-based biomaterials, little attention has been paid to its potential in association with other polymer matrices. Thus, herein, we present an extensive literature review summarizing keratin's compatibility with other synthetic, biosynthetic and natural polymers, and its effect on the materials' final properties in a myriad of applications. First, we revise the historical context of keratin use, describe its structure, chemical toolset and methods of extraction, overview and differentiate keratins obtained from different sources, highlight the main areas where keratin associations have been applied, and describe the possibilities offered by its chemical toolset. Finally, we contextualize keratin's potential for addressing current issues in materials sciences, focusing on the effect of keratin when associated to other polymers' matrices from biomedical to engineering applications, and beyond.

Application of industrial amylolytic yeast strains for the production of bioethanol from broken rice

Amylolytic Saccharomyces cerevisiae derivatives of Ethanol Red™ Version 1 (ER T12) and M2n (M2n T1) were assessed through enzyme assays, hydrolysis trials, electron microscopy and fermentation studies using broken rice. The heterologous enzymes hydrolysed broken rice at a similar rate compared to commercial granular starch-hydrolysing enzyme cocktail. During the fermentation of 20% dw/v broken rice, the amylolytic strains converted rice starch to ethanol in a single step and yielded high ethanol titers. The best-performing strain (ER T12) produced 93% of the theoretical ethanol yield after 96 h of consolidated bioprocessing (CBP) fermentation at 32 °C. Furthermore, the addition of commercial enzyme cocktail (10% of the recommended dosage) in combination with ER T12 did not significantly improve the maximum ethanol concentration, confirming the superior ability of ER T12 to hydrolyse raw starch. The ER T12 strain was therefore identified as an ideal candidate for the CBP of starch-rich waste streams.

Native starch as in situ binder for continuous twin screw wet granulation

The use of native starch as in situ binder in a continuous twin screw wet granulation process was studied. Gelatinization of pea starch occurred in the barrel of the granulator using a poorly soluble excipient (anhydrous dicalcium phosphate), but the degree of gelatinization depended on the liquid-to-solid ratio, the granule heating and the screw configuration. Furthermore, the degree of starch gelatinization was correlated with the granule quality: higher binder efficiency was observed in runs where starch was more gelatinized. SEM and PLOM images showed experimental runs which resulted in completely gelatinized starch. Other starch types (maize, potato and wheat starch) could also be gelatinized when processed above a critical barrel temperature for gelatinization. This barrel temperature was different for all starches. In situ starch gelatinization was also investigated in combination with a highly soluble excipient (mannitol). The lower granule friability observed using pure mannitol compared to a mannitol/starch mixture indicated that starch did not contribute to the binding, hence starch did not gelatinize during processing. The study showed that native starch can be considered as a promising in situ binder for continuous twin screw wet granulation of a poorly soluble formulation.

Characterization of Pure and Blended Pellets Made from Norway Spruce and Pea Starch: A Comparative Study of Bonding Mechanism Relevant to Quality

The mechanism of bonding in biomass pellets is such a complex event to comprehend, as the nature of the bonds formed between combining particles and their relevance to pellet quality are not completely understood. In this study, pure and blended biomass pellets made from Norway spruce and pea starch were characterized using advanced analytical instruments able to provide information beyond what is visible to the human eye, with intent to investigate differences in bonding mechanism relevant to quality. The results, which were comprehensively interpreted from a structural chemistry perspective, indicated that, at a molecular level, the major disparity in bonding mechanism between particles of the pellets and the quality of the pellets, defined in terms of strength and burning efficiency, were determined by variation in the concentration of polar functional groups emanating from the major organic and elemental components of the pellets, as well as the strength of the bonds between atoms of these groups. Microscopic-level analysis, which did not provide any clear morphological features that could be linked to incongruity in quality, showed fracture surfaces of the pellets and patterns of surface roughness, as well as the mode of interconnectivity of particles, which were evidence of the production of pellets with dissimilarities in particle bonding mechanism and visual appearance.

Optimization of butter, xylitol, and high-amylose maize flour on developing a low-sugar cookie

There is a huge interest to develop low-sugar baked products for reducing risks of some diseases, such as adiposis, diabetes, and high blood pressure. A low-sugar cookie was prepared with butter, xylitol, and high-amylose maize flour (HAMF) through response surface methodology. ANOVA of models for sensory profiles, texture, and digestibility showed the models for sensory attributes, hardness, and resistant starch were significant (p < .05), indicating the reliability of these models. Sensory profiles of cookie were mainly affected by butter and xylitol, while HAMF was not significant. Hardness was negatively related to butter and HAMF. Resistant starch (RS) content was positively correlated with butter, xylitol, and HAMF. The improvement of RS was attributed to high proportions of long amylopectin and amylose chains of starch in HAMF and interactions of starch with butter and xylitol. The predicted model showed the optimal combination of a cookie with the highest sensory and resistant starch and the lowest hardness was intermediate butter, high xylitol, and high HAMF contents.

Gelatinization dynamics of starch in dependence of its lamellar structure, crystalline polymorphs and amylose content

Structural dynamics of starch granules selected for different amylose content and crystalline type were analysed in excess water upon heating observed in-situ using SAXS and WAXS. The results showed that NMS and MBS exhibited higher degree of lamellar order than HAM. The peak width at half-maximum (FWHM) of HAM and NMS increased with temperature, demonstrating a gradual radial swelling of the lamellae during gelatinization. For NMS and HAM FWHM increased, suggesting that the dynamics of lamellar thicknesses of these starches were increased during hydrothermal compression exerted by the amorphous lamella. The decrease in FWHM found for MBS indicates that these lamellae were very vulnerable for dissolution. The changes in SAXS peak areas found for NMS and MBS were different from the areas of HAM indicating that A-type starch, as compared to B-type starch, possesses higher degree of lamellae ordering. Our data are potentially useful in starch-based materials processing.

A novel starch: Characterizations of starches separated from tea (Camellia sinensis (L.) O. Ktze) seed

The physicochemical, thermal and crystal properties of starches isolated from 3 different tea (Camellia sinensis (L.) O. Ktze) seeds were analyzed in this study. The shape of tea starch granules were flat spherical or oval shape, showed unimodal or bimodal distribution with average size of around 9 μm. Tea starch was typical A-type starch. Apparent amylose contents of three tea seed starches ranged from 27.06% to 33.17%. The chains having degree of polymerization (DP) 13-24 were over 50% of the total detectable chains for tea amylopectin. Peak gelatinization temperature of tea starch ranged from 65 to 77 °C and the water solubility reached up to 9.70%. The peak viscosity of tea starches were as high as 5300 cP and final viscosity ranged from 4000 to 6700 cP. The results indicated that tea seed starch had potential as gel reagents and provide some guides for comprehensive utilization of tea starch in food and non-food applications.

Water Vapor Adsorption-Desorption Behavior of Surfactant-Coated Starch Particles for Commercial Energy Wheels

This study reports on the adsorption (dehumidification)-desorption (humidification) behavior of cetylpyridinium bromide (CPB) coated starch particles (SPs), denoted as SP-CPB, as a potential desiccant material for air-to-air energy exchangers. CPB is a cationic surfactant with antibacterial activity that can be used to modify the surface properties of SPs, especially at variable CPB loading levels (SP-CPB0.5, SP-CPB2.5, and SP-CPB5.0, where the numeric suffix represents the synthetic loading level of CPB in mM). The SP-CPB0.5 sample displayed optimal surface area and pore structure properties that was selected for water sorption isotherm studies at 25 °C. The CPB-coated SPs sample (SP-CPB0.5) showed an improved water vapor uptake capacity compared to unmodified starch (SPs) and other desiccant systems such as high amylose starch (HAS₁₅) and silica gel (SG₁₃). Single-step and cyclic water vapor sorption tests were conducted using a small-scale exchanger coated with SP-CPB0.5. The calculated latent effectiveness values obtained from direct measurements using cyclic tests (65.4 ± 2%) agree closely with the estimated latent effectiveness from single-step tests (64.6 ± 2%) at controlled operating conditions. Compared to HAS₁₅- and SG₁₃-coated exchangers, the SP-CPB0.5-coated exchanger performed much better at controlled operating conditions, along with improved longevity due to the CPB surface coating. The presence of CPB did not attenuate the uptake properties of native SPs. Latent effectiveness of SP-CPB0.5-coated exchanger was enhanced (5-30% higher) over that of the SG₁₃- or HAS₁₅-coated exchangers, according to the wheel angular speed. This study reports on a novel and sustainable SP-CPB0.5 material as a promising desiccant coating with tunable uptake and surface properties with potential utility in air-to-air energy exchangers for ventilation systems.

Intra-Sample Heterogeneity of Potato Starch Reveals Fluctuation of Starch-Binding Proteins According to Granule Morphology

Starch granule morphology is highly variable depending on the botanical origin. Moreover, all investigated plant species display intra-tissular variability of granule size. In potato tubers, the size distribution of starch granules follows a unimodal pattern with diameters ranging from 5 to 100 µm. Several evidences indicate that granule morphology in plants is related to the complex starch metabolic pathway. However, the intra-sample variability of starch-binding metabolic proteins remains unknown. Here, we report on the molecular characterization of size-fractionated potato starch granules with average diameters of 14.2 ± 3.7 µm, 24.5 ± 6.5 µm, 47.7 ± 12.8 µm, and 61.8 ± 17.4 µm. In addition to changes in the phosphate contents as well as small differences in the amylopectin structure, we found that the starch-binding protein stoichiometry varies significantly according to granule size. Label-free quantitative proteomics of each granule fraction revealed that individual proteins can be grouped according to four distinct abundance patterns. This study corroborates that the starch proteome may influence starch granule growth and architecture and opens up new perspectives in understanding the dynamics of starch biosynthesis.

Comparison of Different Polarization Sensitive Second Harmonic Generation Imaging Techniques

Polarization sensitive second harmonic generation (pSHG) microscopy is an imaging technique able to provide, in a non-invasive manner, information related to the molecular structure of second harmonic generation (SHG) active structures, many of which are commonly found in biological tissue. The process of acquiring this information by means of pSHG microscopy requires a scan of the sample using different polarizations of the excitation beam. This process can take considerable time in comparison with the dynamics of in vivo processes. Fortunately, single scan polarization sensitive second harmonic generation (SS-pSHG) microscopy has also been reported, and is able to generate the same information at a faster speed compared to pSHG. In this paper, the orientation of second harmonic active supramolecular assemblies in starch granules is obtained on by means of pSHG and SS-pSHG. These results are compared in the forward and backward directions, showing a good agreement in both techniques. This paper shows for the first time, to the best of the authors' knowledge, data acquired using both techniques over the exact same sample and image plane, so that they can be compared pixel-to-pixel.

Physicochemical, Microstructural, and Rheological Characterization of Tigernut (Cyperus esculentus) Starch

The aim of this study was to characterize the physicochemical properties of starch isolated from two varieties of tigernuts. The results showed wide variations between the two types of tigernuts. Mean granule sizes were 11.1 and 6.1 μm, respectively, for starch from the yellow and black while amylose content ranged from 19 to 21%. Starch gels from the yellow variety were more stable to freeze-thaw and recorded 37.1% syneresis, compared to 56.5% after the first storage cycle. Pasting properties were significantly different (p < 0.05) among starch from the two tigernut varieties, with black recording higher peak viscosity, lower breakdown, and higher setback viscosity. Gels made from the yellow variety were clearer, softer, more adhesive, and more cohesive. Both gels showed a pseudoplastic flow behavior without thixotropy.

Progress in research and applications of cassava flour and starch: a review

The cassava flours and starches have elicited great use in the food and non-food industry. The diversity in cassava genotypes accounts for differences in end-product properties, and would require characterization of cassava varieties for suitability of culinary and processing. This review showed that screening criteria of cassava cultivars end-user properties include proximate contents, amylose content, structural, swelling, gelatinization and pasting characteristics, including freeze-thaw stability properties of cassava-derived flours and starches. Literature shows that the physiochemical properties vary with genetic factors (i.e. genotype). In this review, the amylose content was found to be the main genetic trait for discriminating the cassava varieties for gelatinization and pasting processes including resistant starches. Moreover, cassava derived raw materials (flours and starches) were found to have various application in baking, edible film, syrup, glucose, alcohol, and soups production.

Synthetized Potato Starch-A New Eco Sizing Agent for Cotton Yarns

The objective of this research was to verify the feasibility of the use of newly synthesized biopolymer materials for sizing cotton yarns based on the basic principles of chemical modification. Research included acid hydrolysis of potato starch up to controlled molar masses together with graft-polymerization and methacrylic acid onto hydrolyzed starch to improve hydrophilicity and solubility, to increase the capability of film forming, to increase adhesive potential and to avoid retrogradation phenomena. Research objectives were primarily focused on finding an appropriate, environmentally-friendly and productive sizing agent for cotton yarns via the analysis and systematization of a large number of synthesis methods in conjunction with the characterization and properties of graft-copolymers. The research results showed that potassium persulfate initiator was most efficient in grafting of methacrylic acid onto hydrolyzed starch, while azobisisobutyronitrile (AIBIN) initiator was most efficient in grafting of acrylic acid (AC). FTIR analysis confirmed that new and efficient products for sizing cotton yarns from synthetized potato starch were obtained. Research on rheological properties of copolymers shows a higher viscosity of grafted products indicating the good stability of potential starches. Ecological improvements have been established through high desizing degree as well as improvements in physical-mechanical properties of yarn, abrasion resistance and decrease in yarn surface hairiness were noticed. The use of new derivatives of potato starch, especially of hydrolyzed starch grafted with methacrylic acid (MAA), potassium persulfate (KPS) as initiator, was confirmed. Anova statistical analysis determined the influence of the entire sizing process on individual yarn parameters.

Understanding the Properties of Starch in Potatoes (Solanum tuberosum var. Agria) after Being Treated with Pulsed Electric Field Processing

The purpose of this study was to investigate the properties of starch in potatoes (Solanum tuberosum cv. Agria) after being treated with pulsed electric fields (PEF). Potatoes were treated at 50 and 150 kJ/kg specific energies with various electric field strengths of 0, 0.5, 0.7, 0.9 and 1.1 kV/cm. Distilled water was used as the processing medium. Starches were isolated from potato tissue and from the PEF processing medium. To assess the starch properties, various methods were used, i.e., the birefringence capability using a polarised light microscopy, gelatinisation behaviour using hot-stage light microscopy and differential scanning calorimetry (DSC), thermal stability using thermogravimetry (TGA), enzyme susceptibility towards α-amylase and the extent of starch hydrolysis under in vitro simulated human digestion conditions. The findings showed that PEF did not change the properties of starch inside the potatoes, but it narrowed the temperature range of gelatinisation and reduced the digestibility of starch collected in the processing medium. Therefore, this study confirms that, when used as a processing aid for potato, PEF does not result in detrimental effects on the properties of potato starch.

Bio- and Fossil-Based Polymeric Blends and Nanocomposites for Packaging: Structure⁻Property Relationship

In the present review, the possibilities for blending of commodities and bio-based and/or biodegradable polymers for packaging purposes has been considered, limiting the analysis to this class of materials without considering blends where both components have a bio-based composition or origin. The production of blends with synthetic polymeric materials is among the strategies to modulate the main characteristics of biodegradable polymeric materials, altering disintegrability rates and decreasing the final cost of different products. Special emphasis has been given to blends functional behavior in the frame of packaging application (compostability, gas/water/light barrier properties, migration, antioxidant performance). In addition, to better analyze the presence of nanosized ingredients on the overall behavior of a nanocomposite system composed of synthetic polymers, combined with biodegradable and/or bio-based plastics, the nature and effect of the inclusion of bio-based nanofillers has been investigated.