Molecular engineering of DNA: molecular beacons

Peptide nucleic acid molecular beacons for the detection of PCR amplicons in droplet-based microfluidic devices

The use of droplet-based microfluidics and peptide nucleic acid molecular beacons for the detection of polymerase chain reaction (PCR)-amplified DNA sequences within nanoliter-sized droplets is described in this work. The nanomolar-attomolar detection capabilities of the method were preliminarily tested by targeting two different single-stranded DNA sequences from the genetically modified Roundup Ready soybean and the Olea europaea genomes and detecting the fluorescence generated by peptide nucleic acid molecular beacons with fluorescence microscopy. Furthermore, the detection of 10 nM solutions of PCR amplicon of DNA extracted from leaves of O. europaea L. encapsulated in nanoliter-sized droplets was performed to demonstrate that peptide nucleic acid molecular beacons can discriminate O. europaea L. cultivar species carrying different single-nucleotide polymorphisms.

Electroanalysis of single-nucleotide polymorphism by hairpin DNA architectures

Genetic analysis of infectious and genetic diseases and cancer diagnostics require the development of efficient tools for fast and reliable analysis of single-nucleotide polymorphism (SNP) in targeted DNA and RNA sequences often responsible for signalling disease onset. Here, we highlight the main trends in the development of electrochemical genosensors for sensitive and selective detection of SNP that are based on hairpin DNA architectures exhibiting better SNP recognition properties compared with linear DNA probes. SNP detection by electrochemical hairpin DNA beacons is discussed, and comparative analysis of the existing SNP sensing strategies based on enzymatic and nanoparticle signal amplification schemes is presented.

An elegant biosensor molecular beacon probe: challenges and recent solutions

Molecular beacon (MB) probes are fluorophore- and quencher-labeled short synthetic DNAs folded in a stem-loop shape. Since the first report by Tyagi and Kramer, it has become a widely accepted tool for nucleic acid analysis and triggered a cascade of related developments in the field of molecular sensing. The unprecedented success of MB probes stems from their ability to detect specific DNA or RNA sequences immediately after hybridization with no need to wash out the unbound probe (instantaneous format). Importantly, the hairpin structure of the probe is responsible for both the low fluorescent background and improved selectivity. Furthermore, the signal is generated in a reversible manner; thus, if the analyte is removed, the signal is reduced to the background. This paper highlights the advantages of MB probes and discusses the approaches that address the challenges in MB probe design. Variations of MB-based assays tackle the problem of stem invasion, improve SNP genotyping and signal-to-noise ratio, as well as address the challenges of detecting folded RNA and DNA.

L-DNA molecular beacon: a safe, stable, and accurate intracellular nano-thermometer for temperature sensing in living cells

Noninvasive and accurate measurement of intracellular temperature is of great significance in biology and medicine. This paper describes a safe, stable, and accurate intracellular nano-thermometer based on an L-DNA molecular beacon (L-MB), a dual-labeled hairpin oligonucleotide built from the optical isomer of naturally occurring d-DNA. Relying on the temperature-responsive hairpin structure and the FRET signaling mechanism of MBs, the fluorescence of L-MBs is quenched below the melting temperature and enhanced with increasing temperature. Because of the excellent reversibility and tunable response range, L-MBs are very suitable for temperature sensing. More importantly, the non-natural L-DNA backbone prevents the L-MBs from binding to cellular nucleic acids and proteins as well as from being digested by nucleases inside the cells, thus ensuring excellent stability and accuracy of the nano-thermometer in a complex cellular environment. The L-MB nano-thermometer was used for the photothermal study of Pd nanosheets in living cells, establishing the nano-thermometer as a useful tool for intracellular temperature measurement.

Engineering molecular beacons for intracellular imaging

Molecular beacons (MBs) represent a class of nucleic acid probes with unique DNA hairpin structures that specifically target complementary DNA or RNA. The inherent "OFF" to "ON" signal transduction mechanism of MBs makes them promising molecular probes for real-time imaging of DNA/RNA in living cells. However, conventional MBs have been challenged with such issues as false-positive signals and poor biostability in complex cellular matrices. This paper describes the novel engineering steps used to improve the fluorescence signal and reduce to background fluorescence, as well as the incorporation of unnatural nucleotide bases to increase the resistance of MBs to nuclease degradation for application in such fields as chemical analysis, biotechnology, and clinical medicine. The applications of these de novo MBs for single-cell imaging will be also discussed.

An enzyme substrate binding aptamer complex based time-resolved fluorescence sensor for the adenosine deaminase detection

In this work, we report an enzyme substrate binding aptamer complex based fluorescence sensor for an enzyme activity detection of adenosine deaminase (ADA). The sensor employs a DNA probe containing an adenosine aptamer region dually labeled with biotin and digoxigenin (DIG). The probe is immobilized in a streptavidin-modified 96-well micro plate via biotin-avidin bridge, and the DIG serves as an affinity tag for an Anti-DIG antibody conjugated with horseradish peroxidase (anti-DIG-HRP). The principle of our sensor is as follows: the aptamer forms a coiled structure making the DNA in a "closed" state in the presence of adenosine, which shields the DIG tag from the bulky anti-DIG-HRP due to a proper steric effect. After adding ADA in the test solution, adenosine will be converted to inosine regardless of the aptamer binding. Then, the inosine release causes the DNA to relax and consequently, the DIG becomes accessible to the bulky anti-DIG-HRP which will further conjugate a Eu³⁺ labeled anti-horseradish peroxidase (Eu-anti-HRP). The Eu-anti-HRP can give a fluorescence signal when an enhancement solution is added. In the result of the experiment, we found the sensor signal can reflect the enzyme activity accurately and the detection limit is lowered to 0.5 U L⁻¹ of ADA not only in buffer solution, but also in serum, and an enzyme inhibitor erythro-9-(2-hydroxy-3-nonyl) adenine hydrochloride is studied. With a concentration of 0.01 nM it is enough to cause a distinct difference of the sensor response.

Nucleic acid fluorescent probes for biological sensing

Nucleic acid fluorescent probes are playing increasingly important roles in biological sensing in recent years. In addition to the conventional functions of single-stranded DNA/RNA to hybridize with their complementary strands, affinity nucleic acids (aptamers) with specific target binding properties have also been developed, which has greatly broadened the application of nucleic acid fluorescent probes to the detection of a large variety of analytes, including small molecules, proteins, ions, and even whole cells. Another chemical property of nucleic acids is to act as substrates for various nucleic acid enzymes. This property can be utilized not only to detect those enzymes and screen their inhibitors, but also employed to develop effective signal amplification systems, which implies extensive applications. This review mainly covers the biosensing methods based on the above three types of nucleic acid fluorescent probes. The most widely used intensity-based biosensing assays are covered first, including nucleic acid probe-based signal amplification methods. Then fluorescence lifetime, fluorescence anisotropy, and fluorescence correlation spectroscopy assays are introduced, respectively. As a rapidly developing field, fluorescence imaging approaches are also briefly summarized.

Oligonucleotide Conjugates for Detection of Specific Nucleic Acid Sequences

In this chapter, we summarise the designs of fluorophore-modified nucleic acids used as probes for the detection of target DNA/RNA. Recently, there has been an increasing demand for the sequence-specific detection of DNA and RNA in biology and biotechnology. Fluorescent probes based on nucleic acids are useful because of their simplicity and ease of handling. Here, we described three types of fluorescent probe: 1) linear probes, 2) binary probes, and 3) molecular beacons. Each can have one or more fluorophores. Mechanisms for the fluorescence responses of these probes are also discussed in detail. These fluorescent probes have been used in real-time polymerase chain reaction (PCR), genetic analyses, and messenger RNA (mRNA) imaging in living cells. Improvements in sensitivity, selectivity, and nuclease resistance of these probes will lead to more widespread applications in chemical biology, biotechnology, and medicine.

Bioelectrochemical switches for the quantitative detection of antibodies directly in whole blood

The development of rapid, low-cost point-of-care approaches for the quantitative detection of antibodies would drastically impact global health by shortening the delay between sample collection and diagnosis and by improving the penetration of modern diagnostics into the developing world. Unfortunately, however, current methods for the quantitative detection of antibodies, including ELISAs, Western blots, and fluorescence polarization assays, are complex, multiple-step processes that rely on well-trained technicians working in well-equipped laboratories. In response, we describe here a versatile, DNA-based electrochemical "switch" for the rapid, single-step measurement of specific antibodies directly in undiluted whole blood at clinically relevant low-nanomolar concentrations.

Detection of silver(I) ions based on the controlled self-assembly of a perylene fluorescence probe

In the current work, we report a label-free fluorescence turn-on approach for the sensitive and selective sensing of Ag(+). A cationic perylene derivative, compound A, was used as the fluorescence probe. Compound A monomer is strongly fluorescent, and the fluorescence can be efficiently quenched through self-aggregation (self-assembly). A cytosine (C)-rich oligonucleotide, oligo-C, was employed. In the absence of Ag(+), oligo-C induced strong compound A aggregation due to electrostatic interactions in aqueous media, and very weak fluorescence signal was detected. However, in the presence of Ag(+), the specific interactions between oligo-C and Ag(+) induced hairpin structure formation of oligo-C through C-Ag(+)-C bonding interactions. Oligo-C binding to compound A aggregates was weakened; therefore, compound A monomer could be released and detected. The intensity of the fluorescence signal was directly related to the amount of Ag(+) added to the assay solution. Our method is highly sensitive-a limit of detection of 5nM was obtained-and also very selective. Ag(+) detection in complex sample mixtures was also demonstrated.

Highly selective detection of single-nucleotide polymorphisms using a quartz crystal microbalance biosensor based on the toehold-mediated strand displacement reaction

Toehold-mediated strand displacement reaction (SDR) is first introduced to develop a simple quartz crystal microbalance (QCM) biosensor without an enzyme or label at normal temperature for highly selective and sensitive detection of single-nucleotide polymorphism (SNP) in the p53 tumor suppressor gene. A hairpin capture probe with an external toehold is designed and immobilized on the gold electrode surface of QCM. A successive SDR is initiated by the target sequence hybridization with the toehold domain and ends with the unfolding of the capture probe. Finally, the open-loop capture probe hybridizes with the streptavidin-coupled reporter probe as an efficient mass amplifier to enhance the QCM signal. The proposed biosensor displays remarkable specificity to target the p53 gene fragment against single-base mutant sequences (e.g., the largest discrimination factor is 63 to C-C mismatch) and high sensitivity with the detection limit of 0.3 nM at 20 °C. As the crucial component of the fabricated biosensor for providing the high discrimination capability, the design rationale of the capture probe is further verified by fluorescence sensing and atomic force microscopy imaging. Additionally, a recovery of 84.1% is obtained when detecting the target sequence in spiked HeLa cells lysate, demonstrating the feasibility of employing this biosensor in detecting SNPs in biological samples.

Simple and universal platform for logic gate operations based on molecular beacon probes

A new platform technology is herein described with which to construct molecular logic gates by employing the hairpin-structured molecular beacon probe as a basic work unit. In this logic gate operation system, single-stranded DNA is used as the input to induce a conformational change in a molecular beacon probe through a sequence-specific interaction. The fluorescent signal resulting from the opening of the molecular beacon probe is then used as the output readout. Importantly, because the logic gates are based on DNA, thus permitting input/output homogeneity to be preserved, their wiring into multi-level circuits can be achieved by combining separately operated logic gates or by designing the DNA output of one gate as the input to the other. With this novel strategy, a complete set of two-input logic gates is successfully constructed at the molecular level, including OR, AND, XOR, INHIBIT, NOR, NAND, XNOR, and IMPLICATION. The logic gates developed herein can be reversibly operated to perform the set-reset function by applying an additional input or a removal strand. Together, these results introduce a new platform technology for logic gate operation that enables the higher-order circuits required for complex communication between various computational elements.

Aptamer-nanoparticle assembly for logic-based detection

In this work, gold nanoparticles perform Boolean logic operations in response to two proangiogenic targets important in cancer diagnosis and treatment: PDGF and VEGF. In the absence of protein target, gold nanoparticles are initially dispersed as a red solution; the addition of target proteins causes nanoparticle aggregation, turning the solution blue, as well as the release of dye-labeled aptamer probes, which causes an increase in fluorescence. These outputs constitute an AND or OR gate for simultaneous protein detection. We believe this logic-gate-based detection system will become the basis for novel rapid, cheap, and reliable sensors for diagnostic applications.

DNA-wrapped carbon nanotubes as sensitive electrochemical labels in controlled-assembly-mediated signal transduction for the detection of sequence-specific DNA

A novel electrochemical strategy that uses DNA-wrapped carbon nanotubes (CNTs) as electrochemical labels is developed for sensitive and selective detection of sequence-specific DNA. The presence of target DNA mediates the formation of a sandwiched complex between the DNA-wrapped CNT and a hairpin DNA capture probe immobilized on magnetic beads. This allows target-selective collection of the CNT labels by magnetic separation and transfer on the electrode surface modified with an insulating self-assembled monolayer (SAM). After treatment with N,N-dimethylformamide, the collected sandwiched complex releases the bare CNTs and facilitates the removal of magnetic beads from the electrode surface. The bare CNTs can then assemble on the SAM-modified electrode surface and mediate efficient electron transfer between the electrode and the electroactive species in the solution with a strong current signal generated. The results indicate that the developed strategy shows a sensitive response to target DNA with a desirable signal gain and a low detection limit of 0.9 pM. This strategy is also demonstrated to provide excellent differentiation of single-base mismatch in target DNA. It is expected that this electrochemical strategy may hold great potential as a novel platform for clinical diagnostics and genetic analysis.

Reusable molecular sensor based on photonic activation control of DNA probes

We propose a photoactivatable and resettable molecular sensor using DNA probes. The functionality is achieved by reversible change of DNA structure induced via photonic signals. Based on the mechanism, the sensor can detect target molecules at a desired instant and can be returned to its initial state after detection. The experimental results demonstrate that the concentrations of the target molecules are detected correctly and repeatedly according to the light signal.

RECENT ADVANCES IN GRAPHENE-BASED NANOMATERIALS FOR BIOMEDICAL APPLICATIONS

Graphene, a two-dimensional nanomaterial reported for the first time in 2004, has been widely investigated for its novel physicochemical properties and potential applications. This review selectively summarizes the recent progress in using graphene-based nanomaterials for various biomedical applications. In particular, graphene-based sensors and biosensors, which are classified according to different sensing mechanisms and targets, are thoroughly discussed. Next, the utilization of graphene as nanocarriers for drug delivery, gene delivery and nanomedicine are demonstrated for potential cancer therapies. Finally, other graphene-based matrices, nanoscaffolds, and composites, which are used in bioapplications, are presented, followed by conclusions and perspective.

"DNA traffic lights": concept of wavelength-shifting DNA probes and application in an aptasensor

Add it and see it: The concept of "DNA traffic lights" for wavelength-shifting DNA probes has a great potential in the application of biosensors, for example, in DNA aptamers. A visual color change in the DNA aptasensor fluorescence from green to red occurs after specific target binding.

Ultrafast kinetic DNA hybridization assay based on the visualization of threshold turbidity

We report herein the development of an ultrafast kinetic DNA hybridization assay system based on the visualization of threshold turbidity associated with the assembly of polystyrene nanospheres. Initial testing of our diagnostic protocol on a sequence associated with the anthrax lethal factor indicates that a visually identifiable, turbidity-definitive, and kinetic threshold state could be reached at a time as short as 1 min. The assay scheme allows for both target concentration quantification and differentiation of single base mismatches through registry of the threshold turbidity onset time. The positively charged environment on nanospheres not only contributes to expedited signal generation but also imparts cooperative DNA binding properties. The kinetic visual protocol complements conventionally used thermodynamic strategies and provides an entry point for the circumvention of assay issues associated with ill-defined thermodynamic end points.

Competitive aptamer bioassay for selective detection of adenosine triphosphate based on metal-paired molecular conformational switch and fluorescent gold nanoclusters

A competitive aptamer bioassay was developed for the selective detection of adenosine triphosphate (ATP). The proposed bioassay employed the T-Hg-T induced hairpin-structure as the molecule conformational switch (MCS), aptamer as a specific recognizer, and mercaptoundecanoic acid modified gold nanoclusters (MUA-AuNCs) as a sensitive signal reporter. The T-rich MCS ssDNA with the sequence complementary with that for the aptamer of ATP was bound with Hg(2+) to form the metal-paired hairpin-structure. Addition of the aptamer and its target biomolecule ATP resulted in a competitive aptamer bioassay. The aptamer competed with Hg(2+) to hybridize with T-rich MCS ssDNA, thereby destroyed the hairpin-structure. As a result, the Hg(2+) was released and the signal transduction was achieved. The ATP affected the interaction between aptamer and hairpin-structure, thus mediated the release of Hg(2+), which was sensitively quantified by fluorescent MUA-AuNCs. Under selected conditions, the developed method allowed sensitive and selective detection of ATP with a linear range of 100-2000 nM and a detection limit (3s) of 48 nM. The relative standard deviation for sixty replicate detections of 200 nM ATP was 2.1%, and the recoveries of the spiked ATP in urine samples ranged from 89% to 105%. The developed metal-paired MCS can be easily extended to the sensitive and selective detection of other biomolecules by changing the base sequence of hairpin structure and choosing the corresponding aptamer for the target biomolecule.

Silicon nanowire-based molecular beacons for high-sensitivity and sequence-specific DNA multiplexed analysis

Nanomaterial-based molecular beacons (nanoMBs) have been extensively explored due to unique merits of nanostructures, including gold nanoparticle (AuNP)-, carbon nanotube (CNT)-, and graphene-based nanoMBs. Those nanoMBs are well-studied; however, they possess relatively poor salt stability or low specificity, limiting their wide applications. Here, we present a novel kind of multicolor silicon-based nanoMBs by using AuNP-decorated silicon nanowires as high-performance quenchers. Significantly, the nanoMBs feature robust stability in high-concentration (0.1 M) salt solution and wide-ranging temperature (10-80 °C), high quenching efficiency (>90%) for various fluorophores (e.g., FAM, Cy5, and ROX), and large surfaces for simultaneous assembly of different DNA strands. We further show that silicon-based nanoMBs are highly effective for sensitive and specific multidetection of DNA targets. The unprecedented advantages of silicon-based multicolor nanoMBs would bring new opportunities for challenging bioapplications, such as allele discrimination, early cancer diagnosis, and molecular engineering, etc.

Label-free catalytic and molecular beacon containing an abasic site for sensitive fluorescent detection of small inorganic and organic molecules

In this work, two methods with complementary features, catalytic and molecular beacon (CAMB) and label-free fluorescent sensors using an abasic site, have been combined into new label-free CAMB sensors that possess advantages of each method. The label-free method using a dSpacer-containing molecular beacon makes CAMB more cost-effective and less interfering with the catalytic activity, while CAMB allows the label-free method to use true catalytic turnovers for signal amplifications, resulting in a new label-free CAMB sensor for Pb(2+) ion, with a detection limit of 3.8 nM while maintaining the same selectivity. Furthermore, by using CAMB to overcome the label-free method's limitation of requiring excess enzyme strands, a new label-free CAMB sensor using aptazyme is also designed to detect adenosine down to 1.4 μM, with excellent selectivity over other nucleosides.

Molecular imaging with nucleic acid aptamers

With many desirable properties such as ease of synthesis, small size, lack of immunogenicity, and versatile chemistry, aptamers represent a class of targeting ligands that possess tremendous potential in molecular imaging applications. Non-invasive imaging of various disease markers with aptamer-based probes has many potential clinical applications such as lesion detection, patient stratification, treatment monitoring, etc. In this review, we will summarize the current status of molecular imaging with aptamer-based probes. First, fluorescence imaging will be described which include both direct targeting and activatable probes. Next, we discuss molecular magnetic resonance imaging and targeted ultrasound investigations using aptamer-based agents. Radionuclide-based imaging techniques (single-photon emission computed tomography and positron emission tomography) will be summarized as well. In addition, aptamers have also been labeled with various tags for computed tomography, surface plasmon resonance, dark-field light scattering microscopy, transmission electron microscopy, and surface-enhanced Raman spectroscopy imaging. Among all molecular imaging modalities, no single modality is perfect and sufficient to obtain all the necessary information for a particular question. Thus, a multimodality probe has also been constructed for concurrent fluorescence, gamma camera, and magnetic resonance imaging in vivo. Although the future of aptamer-based molecular imaging is becoming increasingly bright and many proof-of-principle studies have already been reported, much future effort needs to be directed towards the development of clinically translatable aptamer-based imaging agents which will eventually benefit patients.

A molecular peptide beacon for the ratiometric sensing of nucleic acids

A pyrene-functionalized cationic oligopeptide 1 efficiently binds to double-stranded DNA, as shown by different spectrophotochemical studies. Upon binding, the conformation of 1 changes from a folded to an extended form, which leads to a distinct change in the fluorescence properties. Thus, 1 functions as a molecular peptide beacon, and as it is easily taken up by cells, 1 can also be used for imaging of nucleic acids within cells.

Design, synthesis, and characterization of nucleic-acid-functionalized gold surfaces for biomarker detection

Nucleic-acid-functionalized gold surfaces have been used extensively for the development of biological sensors. The development of an effective biomarker detection assay requires careful design, synthesis, and characterization of probe components. In this Feature Article, we describe fundamental probe development constraints and provide a critical appraisal of the current methodologies and applications in the field. We discuss critical issues and obstacles that impede the sensitivity and reliability of the sensors to underscore the challenges that must be met to advance the field of biomarker detection.

Optical sensing by transforming chromophoric silver clusters in DNA nanoreactors

Bifunctional DNA oligonucleotides serve as templates for chromophoric silver clusters and as recognition sites for target DNA strands, and communication between these two components is the basis of an oligonucleotide sensor. Few-atom silver clusters exhibit distinct electronic spectra spanning the visible and near-infrared region, and they are selectively synthesized by varying the base sequence of the DNA template. In these studies, a 16-base cluster template is adjoined with a 12-base sequence complementary to the target analyte, and hybridization induces structural changes in the composite sensor that direct the conversion between two spectrally and stoichiometrically distinct clusters. Without its complement, the sensor strand selectively harbors ~7 Ag atoms that absorb at 400 nm and fold the DNA host. Upon association of the target with its recognition site, the sensor strand opens to expose the cluster template that has the binding site for ~11 Ag atoms, and absorption at 720 nm with relatively strong emission develops in lieu of the violet absorption. Variations in the length and composition of the recognition site and the cluster template indicate that these types of dual-component sensors provide a general platform for near-infrared-based detection of oligonucleotides in challenging biological environments.

Aptamer-DNAzyme hairpins for biosensing of Ochratoxin A

We report an aptasensor for biosensing of Ochratoxin A (OTA) using aptamer-DNAzyme hairpin as biorecognition element. The structure of this engineered nucleic acid includes the horseradish peroxidase (HRP)-mimicking DNAzyme and the OTA specific aptamer sequences. A blocking tail captures a part of these sequences in the stem region of the hairpin. In the presence of OTA, the hairpin is opened due to the formation of the aptamer-analyte complex. As a result, self-assembly of the active HRP-mimicking DNAzyme occurs. The activity of this DNAzyme is linearly correlated with OTA concentration up to 10 nM, showing a limit of detection of 2.5 nM.

Fluorescent DNA-based enzyme sensors

Fluorescent sensors that make use of DNA structures have become widely useful in monitoring enzymatic activities. Early studies focused primarily on enzymes that naturally use DNA or RNA as the substrate. However, recent advances in molecular design have enabled the development of nucleic acid sensors for a wider range of functions, including enzymes that do not normally bind DNA or RNA. Nucleic acid sensors present some potential advantages over classical small-molecule sensors, including water solubility and ease of synthesis. An overview of the multiple strategies under recent development is presented in this critical review, and expected future developments in microarrays, single molecule analysis, and in vivo sensing are discussed (160 references).