Nanostructured Oxides in Chemistry: Characterization and Properties

Characterisation of Nanocrystalline Magnesium Oxide by X-Ray Absorption Spectroscopy

There are numerous methods of preparing nanocrystalline materials. Magnesium oxide is an ideal model system on which to probe the relation of the preparative route and the microstructure. Using X-ray absorption spectroscopy (XAS) we show that the sol-gel route can be used to prepare highly crystalline material provided there is careful control of the calcination conditions. In the present work this is achieved by calcining at high temperatures (at least 800 degrees C). However, this results in grain growth that can be prevented by the addition of a pinning agent, SiO(2), during the preparation of the sol. The pinned samples maintain a particle size of 11 nm even after calcining at 1000 degrees C. Ball-milling is a common method of preparing nanocrystalline oxides, however the present work shows that this produces a significant fraction of amorphous material, the fraction increasing with decreasing grain size (e.g. approximately 30 % for a grain size of 23 nm).

Structural Assessment and Catalytic Consequences of the Oxygen Coordination Environment in Grafted Ti−Calixarenes

Calixarene-Ti complexes were grafted onto SiO2 (0.18-0.24 Ti nm-2) to form isolated and accessible Ti centers persistently coordinated to multidentate calixarene ligands. Grafted Ti-tert-butylcalix[4]arenes gave Ti K-edge absorption spectra with pre-edge features at 4968.6-4968.9 eV, independently of Ti surface density and of their use in epoxidation catalysis. The structure and reactivity of grafted Ti-calix[4]arenes were weakly dependent on thermal treatment below 573 K, and the relative epoxidation rates of trans- and cis-alkenes showed that calixarene ligands did not restrict access to Ti centers more than corresponding calcined Ti-SiO2 materials. For all materials, 13C NMR and UV-visible spectroscopies confirmed the presence of Ti-O-Si connectivity and identical ligand-to-metal transitions. Grafted Ti-homooxacalix[3]arene complexes, however, gave weaker pre-edge features at higher energies ( approximately 4969.5 eV), consistent with greater Ti 3d occupancy and coordination numbers greater than four, and 20-fold lower cyclohexene epoxidation rate constants (per Ti) than on calix[4]arene-based materials. These different rates and near-edge spectra result from aldehyde formation caused by unimolecular cleavage of ether linkages in homooxacalix[3]arene ligands during grafting, leading to higher coordination and electron density at Ti centers. Materials based on tert-butylcalix[4]arene and homooxacalix[3]arenes led to similar epoxidation rates and near-edge spectra after calcination, consistent with the conversion of both materials to isolated Ti centers with identical structure. These materials provide a systematic approach for relating oxidation reactivity to Ti 3d occupancy, a descriptor of Lewis acid strength, and Ti coordination, because they provide Ti centers with varying electron density and coordination, but maintain accessible active centers with uniform structure and unrestricted access to reactants.

Controlled synthesis, characterization, and catalytic properties of Mn(2)O(3) and Mn(3)O(4) nanoparticles supported on mesoporous silica SBA-15

A method established in the present study has proven to be effective in the synthesis of Mn(2)O(3) nanocrystals by the thermolysis of manganese(III) acetyl acetonate ([CH(3)COCH=C(O)CH(3)](3)-Mn) and Mn(3)O(4) nanocrystals by the thermolysis of manganese(II) acetyl acetonate ([CH(3)COCH=C(O)-CH(3)](2)Mn) on a mesoporous silica, SBA-15. In particular, Mn(2)O(3) nanocrystals are the first to be reported to be synthesized on SBA-15. The structure, texture, and electronic properties of nanocomposites were studied using various characterization techniques such as N2 physisorption, X-ray diffraction (XRD), laser Raman spectroscopy (LRS), temperature-programmed reduction (TPR), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). The results of powder XRD at low angles show that the framework of SBA-15 remains unaffected after generation of the manganese oxide (MnO(x)) nanoparticles, whereas the pore volume and the surface area of SBA-15 dramatically decreased as indicated by N2 adsorption-desorption. TEM images reveal that the pores of SBA-15 are progressively blocked with MnO(x) nanoparticles. The formation of the hausmannite Mn(3)O(4) and bixbyite Mn(2)O(3) structures was clearly confirmed by XRD. The surface structures of MnO(x) were also determined by LRS, XPS, and TPR. The crystalline phases of MnO(x) were identified by LRS with corresponding out-of-plane bending and symmetric stretching vibrations of bridging oxygen species (M-O-M) of both MnO(x) nanoparticles and bulk MnO(x). We also observed the terminal Mn=O bonds corresponding to vibrations at 940 and 974 cm-1 for Mn(3)O(4)/SBA-15 and Mn(2)O(3)/SBA-15, respectively. These results show that the MnO(x) species to be highly dispersed inside the channels of SBA-15. The nanostructure of the particles was further identified by the TPR profiles. Furthermore, the chemical states of the surface manganese (Mn) determined by XPS agreed well with the findings of LRS and XRD. These results suggest that the method developed in the present study resulted in the production of MnO(x) nanoparticles on mesoporous silica SBA-15 by controlling the crystalline phases precisely. The thus-prepared nanocomposites of MnO(x) showed significant catalytic activity toward CO oxidation below 523 K. In particular, the MnO(x) prepared from manganese acetyl acetonate showed a higher catalytic reactivity than that prepared from Mn(NO(3))2.

Size-dependent structural transformations of hematite nanoparticles. 1. Phase transition

Using Fourier Transform InfraRed (FTIR) spectroscopy, Raman spectroscopy, X-ray diffraction (XRD), and Transmission Electron Microscopy (TEM), we characterize the structure and/or morphology of hematite (alpha-Fe(2)O(3)) particles with sizes of 7, 18, 39 and 120 nm. It is found that these nanoparticles possess maghemite (gamma-Fe(2)O(3))-like defects in the near surface regions, to which a vibrational mode at 690 cm(-1), active both in FTIR and Raman spectra, is assigned. The fraction of the maghemite-like defects and the net lattice disorder are inversely related to the particle size. However, the effect is opposite for nanoparticles grown by sintering of smaller hematite precursors under conditions when the formation of a uniform hematite-like structure throughout the aggregate is restricted by kinetic issues. This means that not only particle size but also the growth kinetics determines the structure of the nanoparticles. The observed structural changes are interpreted as size-induced alpha-Fe(2)O(3)<-->gamma-Fe(2)O(3) phase transitions. We develop a general model that considers spinel defects and absorbed/adsorbed species (in our case, hydroxyls) as dominant controls on structural changes with particle size in hematite nanoparticles, including solid-state phase transitions. These changes are represented by trajectories in a phase diagram built in three phase coordinates-concentrations of spinel defects, absorbed impurities, and adsorbed species. The critical size for the onset of the alpha-->gamma phase transition depends on the particle environment, and for the dry particles used in this study is about 40 nm. The model supports the existence of intermediate phases (protohematite and hydrohematite) during dehydration of goethite. We also demonstrate that the hematite structure is significantly less defective when the nanoparticles are immersed in water or KBr matrix, which is explained by the effects of the electrochemical double layer and increased rigidity of the particle environment. Finally, we revise the problem of applicability of IR spectroscopy to the lattice vibrations of hematite nanoparticles, demonstrating that structural comparison of different samples is much more reliable if it is based on the E(u) band at about 460 cm(-1) and the spinel band at 690 cm(-1), instead of the A(2u)/E(u) band at about 550 cm(-1) used in previous work. The new methodology is applied to analysis of the reported IR spectra of Martian hematite.

Is the Band Gap of Pristine TiO2Narrowed by Anion- and Cation-Doping of Titanium Dioxide in Second-Generation Photocatalysts?

Second-generation TiO(2)-(x)D(x) photocatalysts doped with either anions (N, C, and S mostly) or cations have recently been shown to have their absorption edge red-shifted to lower energies (longer wavelengths), thus enhancing photonic efficiencies of photoassisted surface redox reactions. Some of the studies have proposed that this red-shift is caused by a narrowing of the band gap of pristine TiO(2) (e.g., anatase, E(bg) = 3.2 eV; absorption edge ca. 387 nm), while others have suggested the appearance of intragap localized states of the dopants. By contrast, a recent study by Kuznetsov and Serpone (J. Phys. Chem. B, in press) has proposed that the commonality in all these doped titanias rests with formation of oxygen vacancies and the advent of color centers (e.g., F, F(+), F(++), and Ti(3+)) that absorb the visible light radiation. This article reexamines the various claims and argues that the red-shift of the absorption edge is in fact due to formation of the color centers, and that while band gap narrowing is not an unknown occurrence in semiconductor physics it does necessitate heavy doping of the metal oxide semiconductor, thereby producing materials that may have completely different chemical compositions from that of TiO(2) with totally different band gap electronic structures.

“Nanocasting”: Using SBA-15 Silicas as Hard Templates to Obtain Ultrasmall Monodispersed γ-Fe2O3 Nanoparticles

This work describes the use of mesoporous SBA-15 silicas as hard templates for the size-controlled synthesis of oxide nanoparticles, with the pores acting as nanoscale reactors. This fundamental work is mainly aimed at understanding unresolved issues concerning the occurrence and size dependence of phase transitions in oxide nanocrystals. Aqueous solutions of Fe(NO3)3*9H2O are deposited inside the pores of SBA-15 silicas with mesopore diameters of 4.3, 6.6, and 9.5 nm. By calcination, the nitrate salt transforms into FeOx oxides. The XRD peaks of nanocrystals are broad and overlapping, resulting in ambiguities attributed to a given allotropic variety of Fe2O3 (alpha, epsilon, or gamma) or Fe3O4. The association of XRD, SAED, and Raman information is necessary to solve these ambiguities. The metastable gamma-Fe2O3 variety is selectively formed at low Fe/Si atomic ratio (ca. 0.20) and when a low calcination temperature is used (773 or 873 K followed by quenching to room temperature once the targeted temperature is reached). The small size dispersion of the patterned nanoparticles, suggested on a local scale by TEM, is confirmed statistically by magnetic measurements. The nanoparticles have a superparamagnetic behavior around room temperature. Their magnetic moments (from 220 to 370 mB), their sizes (from 4.0 to 4.8 nm), and their blocking temperatures (from 36 to 58 K) increase with the silica template mesopore diameter. Their magnetic properties are compared to those of standard gamma-Fe2O3 nanoparticles of similar size, obtained by coprecipitation in water and stabilized by a citrate coating.

Preparation and Characterization of Copper-Doped Cobalt Oxide Electrodes

Cobalt oxide (Co3O4) and copper-doped cobalt oxide (CuxCo(3-x)O4) films have been prepared onto titanium support by the thermal decomposition method. The electrodes have been characterized by different techniques such as cyclic voltammetry, scanning electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy (XPS). The effect on the electrochemical and crystallographic properties and surface morphology of the amount of copper in the oxide layer has been analyzed. The XPS spectra correspond to a characteristic monophasic Cu-Co spinel oxides when x is below 1. However, when the copper content exceeds that for the stoichiometric CuCo2O4 spinel, a new CuO phase segregates at the surface. The analysis of the surface cation distribution indicates that Cu(II) has preference for octahedral sites.

Fabrication and Characterization of Polycrystalline WO3 Nanofibers and Their Application for Ammonia Sensing

We describe the fabrication and characterization of tungsten oxide nanofibers using the electrospinning technique and sol-gel chemistry. Tungsten isopropoxide sol-gel precursor was incorporated into poly(vinyl acetate)(PVAc)/DMF solutions and electrospun to form composite nanofibers. The as-spun composite nanofibers were subsequently calcinated to obtain pure tungsten oxide nanofibers with controllable diameters of around 100 nm. SEM and TEM were utilized to investigate the structure and morphology of tungsten oxide nanofibers before and after calcination. The relationship between solution concentration and ceramic nanofiber morphology has been studied. A synchrotron-based in situ XRD method was employed to study the dynamic structure evolution of the tungsten oxide nanofibers during the calcination process. It has been shown that the as-prepared tungsten oxide ceramic nanofibers have a quick response to ammonia with various concentrations, suggesting potential applications of the electrospun tungsten oxide nanofibers as a sensor material for gas detection.

ZnO Multipods, Submicron Wires, and Spherical Structures and Their Unique Field Emission Behavior

A simple method of vapor deposition for the shape selective synthesis of ZnO structures, namely, multipods, submicron wires, and spheres, has been successfully demonstrated. A plausible growth mechanism based on the studies of scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) is proposed. Our studies suggest that the growth of a multipod structure is governed by the screw dislocation propagation while the vapor-liquid-solid (VLS) mechanism is responsible for the formation of submicron wires and spheres. Moreover, the flow rate of the carrier gas plays a crucial role in governing the morphology. Further, these structures exhibit an enhanced field emission behavior. The nonlinearity in the Fowler-Nordheim (F-N) plot, a characteristic feature of electron emission from semiconductors, is explained by considering the contributions from both the conduction and the valence bands of ZnO.

Hexagonal and Prismatic Nanowalled ZnO Microboxes

We hereby report hydrothermal syntheses of new microstructures of semiconducting ZnO. Single-crystalline prismatic ZnO microboxes formed by nanowalls and hexagonal hollow microdisks closed by plates with micron-sized inorganic fullerene-like structures have been made in a base-free medium through a one-step hydrothermal synthesis with the help of n-butanol (NB). Structures and morphologies of the products were confirmed by results from powder X-ray diffraction and scanning electron microscopy. NB has been found to play a crucial role in the growth of these hollow structures. It is indicated that these hollow ZnO crystals were grown from redissolution of interiors. These ZnO microboxes exhibit a band emission in the visible range, implying the possession of a high content of defects.

Nanostructured Oxide-Based Powders: Investigation of the Growth Mode of the CeO2 Clusters on the YSZ Surface

CeO(2)/YSZ nanocomposite powders, characterized by increasing Ce/Zr atomic ratio, were obtained by depositing, by wet impregnation, different amounts of CeO(2) on the yttria-stabilized zirconia (YSZ) surface. These powders were characterized by means of X-ray photoelectron spectroscopy, transmission electron microscopy, energy dispersive spectroscopy, and X-ray diffraction. Experimental results allow us to obtain interesting information concerning the growth mode, the morphology, and the dimensions of the CeO(2) clusters on the YSZ supporting surface. A 3-D growing mechanism was observed for the CeO(2) nanoparticles. With increasing Ce/Zr atomic ratio the CeO(2) clusters become more and more spherical. Moreover, XPS data also show the presence of Ce(III) and Ce(IV) ions at the interface supported/supporting oxides.

Influence of Sn4+on the structural and electronic properties of Ti1−xSnxO2nanoparticles used as photocatalysts

Ti(1-x)Sn(x)O(2) nanocrystalline materials employed for photocatalysis have been characterised by means of X-ray diffraction, Raman, X-ray absorption (XANES and EXAFS) and UV-Vis spectroscopy and high resolution transmission electron microscopy. Single-phase samples with anatase or rutile type structures and similar tin contents permitted a separate study of the effect of Sn(4+) ions on these crystalline forms, whereas materials composed of anatase and rutile mixtures were used to investigate the distribution of the dopant cations when both phases coexist. The results obtained from the single-phase doped TiO(2) samples indicate that the presence of tin causes a different effect when doping anatase or rutile in both their structural and electronic properties. While a random substitution of Sn(4+) for Ti(4+) seems plausible for the rutile phase, some kind of gradient in Sn(4+) concentration is possible in anatase. On the other hand, when anatase and rutile coexist, effects of doping are visible in both phases. Regarding chemical composition, a homogeneous distribution of tin was found in both calcined and hydrothermal multiphase samples. Photocatalytic experiments show that both tin-doping and coexistence of different phases have a beneficial effect on the activity of the catalysts.

Growth of Single-Crystalline KNbO3 Nanostructures

This communication reports on the growth of highly uniform KNbO3 nanowires exhibiting a narrow diameter distribution around 60 nm and a length-to-width ratio up to 100. The nanowires were prepared by a hydrothermal route, which enables simple, gram-scale production. A systematic study of the synthesized nanowires in terms of the morphological and chemical characteristics was carried out by varying the temperature-pressure conditions and the composition of the starting mixture. The results indicate that highly uniform single-crystalline nanowires form within a narrow window of the ternary phase diagram of KOH-Nb2O5-H2O.

Photodissociation of vanadium, niobium, and tantalum oxide cluster cations

Transition-metal oxide clusters of the form M(n)O(m) (+)(M=V,Nb,Ta) are produced by laser vaporization in a pulsed nozzle cluster source and detected with time-of-flight mass spectrometry. Consistent with earlier work, cluster oxides for each value of n produce only a limited number of stoichiometries, where m>n. The cluster cations are mass selected and photodissociated using the second (532 nm) or third (355 nm) harmonic of a Nd:YAG (yttrium aluminum garnet) laser. All of these clusters require multiphoton conditions for dissociation, consistent with their expected strong bonding. Dissociation occurs by either elimination of oxygen or by fission, repeatedly producing clusters having the same specific stoichiometries. In oxygen elimination, vanadium species tend to lose units of O(2), whereas niobium and tantalum lose O atoms. For each metal increment n, oxygen elimination proceeds until a terminal stoichiometry is reached. Clusters having this stoichiometry do not eliminate more oxygen, but rather undergo fission, producing smaller M(n)O(m) (+) species. The smaller clusters produced as fission products represent the corresponding terminal stoichiometries for those smaller n values. The terminal stoichiometries identified are the same for V, Nb, and Ta oxide cluster cations. This behavior suggests that these clusters have stable bonding networks at their core, but additional excess oxygen at their periphery. These combined results determine that M(2)O(4) (+), M(3)O(7) (+), M(4)O(9) (+), M(5)O(12) (+), M(6)O(14) (+), and M(7)O(17) (+) have the greatest stability for V, Nb, and Ta oxide clusters.

Unusual Physical and Chemical Properties of Cu in Ce1-xCuxO2 Oxides

The structural and electronic properties of Ce(1-x)Cu(x)O(2) nano systems prepared by a reverse microemulsion method were characterized with synchrotron-based X-ray diffraction, X-ray absorption spectroscopy, Raman spectroscopy, and density functional calculations. The Cu atoms embedded in ceria had an oxidation state higher than those of the cations in Cu(2)O or CuO. The lattice of the Ce(1)(-x)Cu(x)O(2) systems still adopted a fluorite-type structure, but it was highly distorted with multiple cation-oxygen distances with respect to the single cation-oxygen bond distance seen in pure ceria. The doping of CeO(2) with copper introduced a large strain into the oxide lattice and favored the formation of O vacancies, leading to a Ce(1-x)Cu(x)O(2-y) stoichiometry for our materials. Cu approached the planar geometry characteristic of Cu(II) oxides, but with a strongly perturbed local order. The chemical activities of the Ce(1-x)Cu(x)O(2) nanoparticles were tested using the reactions with H(2) and O(2) as probes. During the reduction in hydrogen, an induction time was observed and became shorter after raising the reaction temperature. The fraction of copper that could be reduced in the Ce(1-x)Cu(x)O(2) oxides also depended strongly on the reaction temperature. A comparison with data for the reduction of pure copper oxides indicated that the copper embedded in ceria was much more difficult to reduce. The reduction of the Ce(1-x)Cu(x)O(2) nanoparticles was rather reversible, without the generation of a significant amount of CuO or Cu(2)O phases during reoxidation. This reversible process demonstrates the unusual structural and chemical properties of the Cu-doped ceria materials.

Phase Evolution, Texture Behavior, and Surface Chemistry of Hydrothermally Derived Scandium (Hydrous) Oxide Nanostructures

Nanostructured scandium hydrous oxides were hydrothermally synthesized at 180 degrees C for 18 h, using NaOH, NH(4)OH, and KOH as the bases. They were characterized by means of X-ray diffraction (XRD), transmission electron microscopy (TEM), N2 adsorption, thermogravimetry and differential thermal analysis (TG-DTA), infrared and Raman spectroscopy, and pyridine adsorption. XRD and TEM measurements showed that the nature and concentration of the bases played key roles in determining the phasic composition, texture behavior (shape and size), and surface chemistry of the hydrothermal products. In addition, the shape evolution of the crystalline products seemed to be closely connected with their crystal structures. As the basicity value was raised from pH 10 to 5 mol L(-1) NaOH (or KOH), alpha-ScOOH nanorods, alpha-ScOOH nanosized hexagonal-like plates, and cubic Sc(OH)3 cubes/cuboids in micrometer size were produced in turn; while within pH 10-12 using NH4OH, gamma-ScOOH nanosized lozenge-like plates were mainly obtained. According to XRD, TEM, and TG-DTA results, all the as-prepared nanostructured ScOOH and micrometric Sc(OH)3 could be converted to cubic Sc2O3 with sustained crystalline shape via calcination at 500 degrees C. Pyridine adsorption revealed the existence of Lewis acid sites on the surfaces of the nanostructured alpha-ScOOH samples and some of their Sc2O3 counterparts calcined at 700 degrees C. The alpha-ScOOH nanorod sample displayed the strongest Lewis acidity among all the samples tested, due to its highest surface area as determined by N2 adsorption. Finally, an olation-oxolation process based on a dissolution/recrystallization mechanism accounts for the formation of various ScOOH polymorphs and Sc(OH)3 with different shapes.

High purity anatase TiO(2) nanocrystals: near room-temperature synthesis, grain growth kinetics, and surface hydration chemistry

High purity, spherical anatase nanocrystals were prepared by a modified sol-gel method. Mixing of anhydrous TiCl(4) with ethanol at about 0 degrees C yielded a yellowish sol that was transformed into phase-pure anatase of 7.7 nm in size after baking at 87 degrees C for 3 days. This synthesis route eliminates the presence of fine seeds of the nanoscale brookite phase that frequently occurs in low-temperature formation reactions and also significantly retards the phase transformation to rutile at high temperatures. Heating the as-is 7.7 nm anatase for 2 h at temperatures up to 600 degrees C leads to an increase in grain size of the anatase nanoparticles to 32 nm. By varying the calcination time from 2 to 48 h at 300 degrees C, the particle size could be controlled between 12 and 15.3 nm. The grain growth kinetics of anatase nanoparticles was found to follow the equation, D(2) - D(0)(2) = k(0)t(m)e((-)(E)(a)/(RT)) with a time exponent m = 0.286(+/-9) and an activation energy of E(a) = 32 +/- 2 kJ x mol(-)(1). Thermogravimetric analysis in combination with infrared and X-ray photoemission spectroscopies has shown the anatase nanocrystals at different sizes to be composed of an interior anatase lattice with surfaces that are hydrogen-bonded to a wide set of energetically nonequivalent groups. With a decrease in particle size, the anatase lattice volume contracts, while the surface hydration increases. The removal of the surface hydration layers causes coarsening of the nanoparticles.

X-ray Absorption Spectroscopic Investigation of Partially Reduced Cobalt Species in Co−MCM-41 Catalysts during Synthesis of Single-Wall Carbon Nanotubes

Chemometric tools were employed to analyze the in-situ dynamic X-ray absorption spectroscopy data to probe the state of Co-MCM-41 catalysts during reduction in pure hydrogen and under single-wall carbon nanotube synthesis reaction conditions. The use of the progressive correlation analysis established the sequence in which changes in the spectral features near the Co K edge occurred, and the evolving factor analysis provided evidence for the formation of an intermediate Co(1+) ionic species during reduction of the Co-MCM-41 catalyst in pure hydrogen up to 720 degrees C. This intermediate species preserves the tetrahedral environment in the silica framework and is resistant to complete reduction to the metal in H(2). While the Co(2+) species is resistant to reduction in pure CO, the intermediate Co(1+) species is more reactive in CO most likely forming cobalt carbonyl-like compounds with high mobility in the MCM-41. These mobile species are the precursors of the metallic clusters growing carbon nanotubes. Controlling the rates of each step of this two-stage reduction process is key to controlling the size of the metallic Co clusters formed in Co-MCM-41 catalysts.

Methyltriskaidecazirconates, molecular forms of zirconia

Repeated methanolysis of [Zr(3)O](OPr(n)(10) followed by extraction and crystallization from toluene yields material that is X-ray crystallographically indistinguishable from the compound previously formulated as [Zr(13)O(8)](OMe)(36). Elemental analysis and (1)H solution NMR spectroscopy strongly suggest that this material is a mixture of methyltriskaidecazirconates (MTZ) [Zr(13)O(8)](OMe)(x)(OH)(36)(-)(x), x(av) approximately 20, that readily cocrystallize from hydrocarbon solution. These species have the metal-oxygen framework structure reported for [Zr(13)O(8)](OMe)(36), where the 13 zirconium and 32 bridging oxygen atoms comprise a fragment of the fluorite structure adopted by ZrO(2) at elevated temperatures. Ethanolysis of [Zr(3)O](OPr(n)(10) yields its ethyl analogue, [Zr(3)O](OEt)(10). Both trizirconates display temperature-dependent (1)H solution NMR spectra that are interpreted mechanistically in terms of rearrangement mechanisms involving trigonal twists at the octahedral zirconium centers.

Preparation of highly uniform Ag/TiO2 and Au/TiO2 supported nanoparticle catalysts by photodeposition

Photodeposition of Ag nanoparticles on commercial TiO2 particles and nanoparticles was performed in order to provide direct visualization of the spatial distribution of photoactive sites on sub-micrometer-scale and nanoscale TiO2 particle surfaces and to create materials for potential catalytic applications. HRTEM (high-resolution transmission electron microscopy) and HAADF-STEM (high-angle annular dark-field scanning transmission electron microscopy) were used to characterize these materials. The size and spatial distributions of the Ag nanoparticles on the commercial TiO2 were not uniform; the concentration of Ag was higher on grain boundaries and at the edges of these submicrometer particles. In the case of TiO2 nanoparticles, the size distribution of the Ag nanoparticles deposited was relatively uniform and independent of irradiation time and photon energy. The amount of Ag deposited on TiO2 nanoparticles was at least 6 times higher than that on the commercial samples for comparable irradiation conditions. Compared to the case of Ag photodeposition, the difference in the amount of Au photodeposited on TiO2 particles and nanoparticles was even greater, especially at low precursor concentrations. Photodeposition on TiO2 nanoparticles is suggested as a potential method for the preparation of Au/TiO2 catalysts, as loadings in excess of 10 wt % of uniform 1 nm metal particles were achieved in this work.

The structural and electronic properties of nanostructured Ce1−x−yZrxTbyO2 ternary oxides: Unusual concentration of Tb3+ and metal↔oxygen↔metal interactions

Ceria-based ternary oxides are widely used in many areas of chemistry, physics, and materials science. Synchrotron-based time-resolved x-ray diffraction, x-ray absorption near-edge spectroscopy (XANES), Raman spectroscopy, and density-functional calculations were used to study the structural and electronic properties of Ce-Zr-Tb oxide nanoparticles. The nanoparticles were synthesized following a novel microemulsion method and had sizes in the range of 4-7 nm. The Ce1-x-yZrxTbyO2 ternary systems exhibit a complex behavior that cannot be predicted as a simple extrapolation of the properties of Ce1-xZrxO2, Ce1-xTbxO2, or the individual oxides (CeO2, ZrO2, and TbO2). The doping of ceria with Zr and Tb induces a decrease in the unit cell, but there are large positive deviations with respect to the cell parameters predicted by Vegard's rule for ideal solid solutions. The presence of Zr and Tb generates strain in the ceria lattice through the creation of crystal imperfections and O vacancies. The O K-edge and Tb LIII-edge XANES spectra for the Ce1-x-yZrxTbyO2 nanoparticles point to the existence of distinctive electronic properties. In Ce1-x-yZrxTbyO2 there is an unexpected high concentration of Tb3+, which is not seen in TbO2 or Ce1-xTbxO2 and enhances the chemical reactivity of the ternary oxide. Tb<-->O<-->Zr interactions produce a stabilization of the Tb(4f,5d) states that is responsible for the high concentration of Tb(3+) cations. The behavior of Ce1-x-yZrxTbyO2 illustrates how important can be metal<-->oxygen<-->metal interactions for determining the structural, electronic, and chemical properties of a ternary oxide.

Nanostructured Ti−W Mixed-Metal Oxides: Structural and Electronic Properties

In this article, the structural and electronic properties of Ti-W binary mixed oxide nanoparticles are investigated by using X-ray diffraction, Raman, X-ray absorption spectroscopies (XAS; near edge XANES and extended EXAFS), UV-vis spectroscopy, and density functional calculations. A series of Ti-W binary oxide samples having W content below 20 atom % and with particle size between 8 and 13 nm were prepared by a microemulsion method. The atoms in these nanoparticles adopted the anatase-type structure with a/b lattice constants rather similar to those of the single TiO(2) reference and with a c cell parameter showing a noticeable expansion upon doping. Within the anatase structure, W occupies substitutional positions, while Ti atoms only suffer minor structural perturbations. A change in the W local order at first neighboring distance is observed when comparing samples having a W content below and above 15 atom %. Charge neutrality is mostly achieved by formation of cation vacancies located at the first cation distance of W centers. Upon addition of W to the TiO(2) structure, the Ti charge is not strongly modified, while changes in the W-O interaction appear to drive a modest modification of the W d-electron density throughout the Ti-W series. A combination of these geometrical and electronic effects produced Ti K- and W L(I)/L(III)-edge XANES/EXAFS spectra with distinctive features. UV-vis spectra show a nonlinear decrease of the band gap in the Ti-W solid solutions with a characteristic turning point at a W content of ca. 15 atom %. The relationship between local/long-range order and electronic parameters is discussed on the basis of these experimental results.