Click hydrogels, microgels and nanogels: emerging platforms for drug delivery and tissue engineering

Stimuli-responsive nanogel composites and their application in nanomedicine

Nanogels are nanosized crosslinked polymer networks capable of absorbing large quantities of water. Specifically, smart nanogels are interesting because of their ability to respond to biomedically relevant changes like pH, temperature, etc. In the last few decades, hybrid nanogels or composites have been developed to overcome the ever increasing demand for new materials in this field. In this context, a hybrid refers to nanogels combined with different polymers and/or with nanoparticles such as plasmonic, magnetic, and carbonaceous nanoparticles, among others. Research activities are focused nowadays on using multifunctional hybrid nanogels in nanomedicine, not only as drug carriers but also as imaging and theranostic agents. In this review, we will describe nanogels, particularly in the form of composites or hybrids applied in nanomedicine.

Integrating mechanical and biological control of cell proliferation through bioinspired multieffector materials

In nature, cells respond to complex mechanical and biological stimuli whose understanding is required for tissue construction in regenerative medicine. However, the full replication of such bimodal effector networks is far to be reached. Engineering substrate roughness and architecture allows regulating cell adhesion, positioning, proliferation, differentiation and survival, and the external supply of soluble protein factors (mainly growth factors and hormones) has been long applied to promote growth and differentiation. Further, bioinspired scaffolds are progressively engineered as reservoirs for the in situ sustained release of soluble protein factors from functional topographies. We review here how research progresses toward the design of integrative, holistic scaffold platforms based on the exploration of individual mechanical and biological effectors and their further combination.

In situ formation of copper nanoparticles in a p(NIPAM-VAA-AAm) terpolymer microgel that retains the swelling behavior of microgels

Copper nanoparticles (CuNPs) are formed inside a microgel assembly by an in situ reduction method, confirmed by changes observed in the absorption spectra of CuNPs at different pH values. The presence of CuNPs has been also confirmed by X-ray diffraction (XRD) studies. The terpolymer microgel p(N-isopropylacrylamide-vinyl acetic acid-acrylamide) (p[NIPAM-VAA-AAm]), which is reported for the first time, was synthesized by free radical emulsion polymerization of a temperature-sensitive NIPAM monomer, pH sensitive VAA monomer and a hydrophilic AAm monomer. The effect of temperature below and above the pKa of VAA and the effect of pH at 20°C in the absence and presence of CuNPs on the hydrodynamic radius of microgel was studied. Size of microgel particles is a function of temperature due to the presence of NIPAM, and a function of pH due to the presence of VAA. The presence of CuNPs has little or no effect on the size of microgels by varying pH, which allows these gels to retain their properties with added benefits of CuNPs for possible drug delivery applications.

Click-Crosslinked Injectable Gelatin Hydrogels

Injectable gelatin hydrogels formed with bioorthogonal click chemistry (ClickGel) are cell-responsive ECM mimics for in vitro and in vivo biomaterials applications. Gelatin polymers with pendant norbornene (GelN) or tetrazine (GelT) groups can quickly and spontaneously crosslink upon mixing, allowing for high viability of encapsulated cells, establishment of 3D elongated cell morphologies, and biodegradation when injected in vivo.

Self-Assembled Gold Nanoclusters for Bright Fluorescence Imaging and Enhanced Drug Delivery

Nanoparticles combining enhanced cellular drug delivery with efficient fluorescence detection are important tools for the development of theranostic agents. Here, we demonstrate this concept by a simple, fast, and robust protocol of cationic polymer-mediated gold nanocluster (Au NCs) self-assembly into nanoparticles (NPs) of ca. 120 nm diameter. An extensive characterization of the monodisperse and positively charged NPs revealed pH-dependent swelling properties, strong fluorescence enhancement, and excellent colloidal and photostability in water, buffer, and culture medium. The versatility of the preparation is demonstrated by using different Au NC surface ligands and cationic polymers. Steady-state and time-resolved fluorescence measurements give insight into the aggregation-induced emission phenomenon (AIE) by tuning the Au NC interactions in the self-assembled nanoparticles using the pH-dependent swelling. In vitro studies in human monocytic cells indicate strongly enhanced uptake of the NPs compared to free Au NCs in endocytic compartments. The NPs keep their assembly structure with quite low cytotoxicity up to 500 μg Au/mL. Enhanced drug delivery is demonstrated by loading peptides or antibodies in the NPs using a one-pot synthesis. Fluorescence microscopy and flow cytometry confirmed intracellular colocalization of the biomolecules and the NP carriers with a respective 1.7-fold and 6.5-fold enhanced cellular uptake of peptides and antibodies compared to the free biomolecules.

Thiol-ene click hydrogels for therapeutic delivery

Hydrogels are of growing interest for the delivery of therapeutics to specific sites in the body. For use as a delivery vehicle, hydrophilic precursors are usually laden with bioactive moieties and then directly injected to the site of interest for in situ gel formation and controlled release dictated by precursor design. Hydrogels formed by thiol-ene click reactions are attractive for local controlled release of therapeutics owing to their rapid reaction rate and efficiency under mild aqueous conditions, enabling in situ formation of gels with tunable properties often responsive to environmental cues. Herein, we will review the wide range of applications for thiol-ene hydrogels, from the prolonged release of anti-inflammatory drugs in the spine to the release of protein-based therapeutics in response to cell-secreted enzymes, with a focus on their clinical relevance. We will also provide a brief overview of thiol-ene click chemistry and discuss the available alkene chemistries pertinent to macromolecule functionalization and hydrogel formation. These chemistries include functional groups susceptible to Michael type reactions relevant for injection and radically-mediated reactions for greater temporal control of formation at sites of interest using light. Additionally, mechanisms for the encapsulation and controlled release of therapeutic cargoes are reviewed, including i) tuning the mesh size of the hydrogel initially and temporally for cargo entrapment and release and ii) covalent tethering of the cargo with degradable linkers or affinity binding sequences to mediate release. Finally, myriad thiol-ene hydrogels and their specific applications also are discussed to give a sampling of the current and future utilization of this chemistry for delivery of therapeutics, such as small molecule drugs, peptides, and biologics.

Microfluidically fabricated pH-responsive anionic amphiphilic microgels for drug release

Novel amphiphilic microgels with hydrophobic and hydrophilic monomer units on the polymer chains were fabricated with an on-chip polymerisation methodology using a novel chip design.

Mini-review: fluorescence imaging in cancer cells using dye-doped nanoparticles

Fluorescence imaging has gained increased attention over the past two decades as a viable means to detect a variety of cancers.

Responsive microgels with supramolecular crosslinks: synthesis and triggered degradation in aqueous medium

Stimuli-responsive microgels containing supramolecular crosslinks based on cholesteryl/β-cyclodextrin interactions were synthesized and degraded upon addition of 1-adamantanecarboxylic acid.

Synthesis and biomedical applications of fluorescent nanogels

Fluorescent nanogel is an innovative biomedical material with hydroscopicity, degradability, and responsiveness.

Hydrolytically degradable, dendritic polyglycerol sulfate based injectable hydrogels using strain promoted azide–alkyne cycloaddition reaction

An anionic degradable hydrogel based on a heparin mimetic polymer was prepared using PEG-PCL-DIC as a crosslinker.

An injectable PEG-based hydrogel synthesized by strain-promoted alkyne–azide cycloaddition for use as an embolic agent

Cyclooctyne and azide functionalized PEGs are prepared by ring-opening polymerization. They form a biodegradable hydrogel in situ to temporarily block rabbit ear vessels.

Phosphonate-functionalized polystyrene microspheres with controlled zeta potential for efficient uranium sorption

A new method has been developed for effective uranium(vi) sorption from aqueous solution through phosphonate-functionalized polystyrene microspheres with controlled zeta potentials.

Expansion of bioorthogonal chemistries towards site-specific polymer–protein conjugation

Bioorthogonal chemistries have been used to achieve polymer-protein conjugation with the retained critical properties.

Biodegradable liposome-encapsulated hydrogels for biomedical applications: a marriage of convenience

Liposome-encapsulated hydrogels have emerged as an attractive strategy for medical and pharmaceutical applications.

Using carbohydrate-based biomaterials as scaffolds to control human stem cell fate

This review describes the current state and applications of several important and extensively studied natural polysaccharide and glycoprotein scaffolds that can control the stem cell fate.

Functional biomedical hydrogels for in vivo imaging

In vivo imaging of biomedical hydrogels enables real-time and non-invasive visualization of the status of structure and function of hydrogels.

Synthesis of well-defined core–shell nanoparticles based on bifunctional poly(2-oxazoline) macromonomer surfactants and a microemulsion polymerization process

Surface-functional nanoparticles have been fabricated by utilizing bifunctional poly(2-oxazoline) macromonomers as surfactants in a microemulsion process.

Functionalised type-I collagen as a hydrogel building block for bio-orthogonal tissue engineering applications

Modulating the hydrogel properties from injectable to implantable scaffolds using the bio-orthogonal thiol-Michael addition click reaction.

The emergence of oxime click chemistry and its utility in polymer science

The synthesis of new, highly functional and dynamic polymeric materials has risen dramatically since the introduction of click chemistry in 2001.

Water dispersible siloxane nanogels: a novel technique to control surface characteristics and drug release kinetics

Amphiphilic, water-dispersible, crosslinked siloxane nanogels were synthesized and applied as optically clear, functional coatings on the surface of lens substrates to demonstrate the feasibility of siloxane-nanogels to generate covalently tethered coatings and modify the surface properties of intraocular lens substrates.

Tuning stiffness of cell-laden hydrogel via host–guest interactions

We report a dynamic hydrogel system with on-demand tunable matrix stiffness.

Biofabrication of reinforced 3D-scaffolds using two-component hydrogels

Progress in biofabrication technologies is mainly hampered by the limited number of suitable hydrogels that can act as bioinks. Here, we present a new bioink for 3D-printing, capable of forming large, highly defined constructs. Hydrogel formulations consisted of a thermoresponsive polymer mixed with a poly(ethylene glycol) (PEG) or a hyaluronic acid (HA) cross-linker with a total polymer concentration of 11.3 and 9.1 wt% respectively. These polymer solutions were partially cross-linked before plotting by a chemoselective reaction called oxo-ester mediated native chemical ligation, yielding printable formulations. Deposition on a heated plate of 37 °C resulted in the stabilization of the construct due to the thermosensitive nature of the hydrogel. Subsequently, further chemical cross-linking of the hydrogel precursors proceeded after extrusion to form mechanically stable hydrogels that exhibited a storage modulus of 9 kPa after 3 hours. Flow and elastic properties of the polymer solutions and hydrogels were analyzed under similar conditions to those used during the 3D-printing process. These experiments showed the ability to extrude the hydrogels, as well as their rapid recovery after applied shear forces. Hydrogels were printed in grid-like structures, hollow cones and a model representing a femoral condyle, with a porosity of 48 ± 2%. Furthermore, an N-hydroxysuccinimide functionalized thermoplastic poly-ε-caprolactone (PCL) derivative was successfully synthesized and 3D-printed. We demonstrated that covalent grafting of the developed hydrogel to the thermoplastic reinforced network resulted in improved mechanical properties and yielded high construct integrity. Reinforced constructs also containing hyaluronic acid showed high cell viability of chondrocytes, underlining their potential for further use in regenerative medicine applications.

Multi-Functional Macromers for Hydrogel Design in Biomedical Engineering and Regenerative Medicine

Contemporary biomaterials are expected to provide tailored mechanical, biological and structural cues to encapsulated or invading cells in regenerative applications. In addition, the degradative properties of the material also have to be adjustable to the desired application. Oligo- or polymeric building blocks that can be further cross-linked into hydrogel networks, here addressed as macromers, appear as the prime option to assemble gels with the necessary degrees of freedom in the adjustment of the mentioned key parameters. Recent developments in the design of multi-functional macromers with two or more chemically different types of functionalities are summarized and discussed in this review illustrating recent trends in the development of advanced hydrogel building blocks for regenerative applications.

Grafting Techniques towards Production of Peptide-Tethered Hydrogels, a Novel Class of Materials with Biomedical Interest

In recent years, new highly functional polymeric biomaterials are being developed to increase the therapeutic efficacy in tissue regeneration approaches. Peptides regulate most physiological processes and display several other biological activities. Therefore, their importance in the field of biomedical research and drug development is rapidly increasing. However, the use of peptides as therapeutic agents is restricted by some of their physicochemical properties. The development of improved routes of delivery of peptide-based therapeutics is crucial and is crucial and its biomedical value is expected to increase in the near future. The unique properties of hydrogels triggered their spreading as localized drug depots. Several strategies, such as the carbodiimide chemistry, have been used to successfully immobilize bioactive peptide sequences into the hydrogels backbone. Peptide tethering through the so-called "click" chemistry reactions is also a highly promising, yet underexplored, approach to the synthesis of hydrogels with varying dimensions and patterns. The present review focus on the approaches that are being used for the establishment of chemical bonds between peptides and non-peptidic hydrogels throughout the last decade.

Arginine-glycine-aspartic acid functional branched semi-interpenetrating hydrogels

For the first time a series of functional hydrogels based on semi-interpenetrating networks with both branched and crosslinked polymer components have been prepared and we show the successful use of these materials as substrates for cell culture. The materials consist of highly branched poly(N-isopropyl acrylamide)s with peptide functionalised end groups in a continuous phase of crosslinked poly(vinyl pyrrolidone). Functionalisation of the end groups of the branched polymer component with the GRGDS peptide produces a hydrogel that supports cell adhesion and proliferation. The materials provide a new synthetic functional biomaterial that has many of the features of extracellular matrix, and as such can be used to support tissue regeneration and cell culture. This class of high water content hydrogel material has important advantages over other functional hydrogels in its synthesis and does not require post-processing modifications nor are functional-monomers, which change the polymerisation process, required. Thus, the systems are amenable to large scale and bespoke manufacturing using conventional moulding or additive manufacturing techniques. Processing using additive manufacturing is exemplified by producing tubes using microstereolithography.

Click-crosslinkable and photodegradable gelatin hydrogels for cytocompatible optical cell manipulation in natural environment

This paper describes the generation of “click-crosslinkable“ and “photodegaradable“ gelatin hydrogels from the reaction between dibenzocycloctyl-terminated photoclevable tetra-arm polyethylene glycol and azide-modified gelatin. The hydrogels were formed in 30 min through the click-crosslinking reaction. The micropatterned features in the hydrogels were created by micropatterned light irradiation; the minimum resolution of micropatterning was 10-μm widths for line patterns and 20-μm diameters for circle patterns. Cells were successfully encapsulated in the hydrogels without any loss of viability across a wide concentration range of crosslinker. In contrast, an activated-ester-type photocleavable crosslinker, which we previously used to prepare photodegradable gelatin hydrogels, induced a decrease in cell viability at crosslinker concentrations greater than 1.8 mM. We also observed morphology alteration and better growth of cancer cells in the click-crosslinked photodegradable gelatin hydrogels that included matrigel than in the absence of matrigel. We also demonstrated micropatterning of the hydrogels encapsulating cells and optical cell separation. Both of the cells that remained in the non-irradiated area and the cells collected from the irradiated area maintained their viability.

Recent advances of thermally responsive nanogels for cancer therapy

Thermally responsive nanogel drug delivery systems (TRNDDS) have been widely investigated as a new strategy for active targeting tumor therapy, as these can accumulate on the tumor site and/or release the payload at the desired site by structure changes rapidly once stimulated by temperature changes. In this review, we discuss the evolution of TRNDDS and future perspectives for antitumor drug and gene delivery. With further understanding of the specificity of tumor site at the cellular and molecular level, in parallel with the development of nanomaterial design and preparation, TRNDDS show great potential for tumor targeting therapy.

Biomaterial Approaches to Enhancing Neurorestoration after Spinal Cord Injury: Strategies for Overcoming Inherent Biological Obstacles

While advances in technology and medicine have improved both longevity and quality of life in patients living with a spinal cord injury, restoration of full motor function is not often achieved. This is due to the failure of repair and regeneration of neuronal connections in the spinal cord after injury. In this review, the complicated nature of spinal cord injury is described, noting the numerous cellular and molecular events that occur in the central nervous system following a traumatic lesion. In short, postinjury tissue changes create a complex and dynamic environment that is highly inhibitory to the process of neural regeneration. Strategies for repair are outlined with a particular focus on the important role of biomaterials in designing a therapeutic treatment that can overcome this inhibitory environment. The importance of considering the inherent biological response of the central nervous system to both injury and subsequent therapeutic interventions is highlighted as a key consideration for all attempts at improving functional recovery.

Colloidal chitin nanogels: A plethora of applications under one shell

Chitin nanogels (CNGs) are a relatively new class of natural polymeric nanomaterials which have a large potential in the field of drug delivery and nanotherapeutics. These nanogels being very biocompatible are non-toxic when internalized by cells. In this review various properties, preparation techniques and applications of CNGs have been described. CNGs because of their nano-size possess certain unique properties which enable them to be used in a number of biomedical applications. CNGs are prepared by simple regeneration technique without using any cross-linkers. Various polymers, drugs and fluorescent dyes can be blended or incorporated or labelled with the chitin hydrogel network. Drugs and molecules encapsulated within CNGs can be used for targeted delivery, in vivo monitoring or even for therapeutic purposes. Here various applications of CNGs in the field of drug delivery, imaging, sensing and therapeutics have been discussed.

Controlled release strategies for modulating immune responses to promote tissue regeneration

Advances in the field of tissue engineering have enhanced the potential of regenerative medicine, yet the efficacy of these strategies remains incomplete, and is limited by the innate and adaptive immune responses. The immune response associated with injury or disease combined with that mounted to biomaterials, transplanted cells, proteins, and gene therapies vectors can contribute to the inability to fully restore tissue function. Blocking immune responses such as with anti-inflammatory or immunosuppressive agents are either ineffective, as the immune response contributes significantly to regeneration, or have significant side effects. This review describes targeted strategies to modulate the immune response in order to limit tissue damage following injury, promote an anti-inflammatory environment that leads to regeneration, and induce antigen (Ag)-specific tolerance that can target degenerative diseases that destroy tissues and promote engraftment of transplanted cells. Focusing on targeted immuno-modulation, we describe local delivery techniques to sites of inflammation as well as systemic approaches that preferentially target subsets of immune populations.

Intracellular Degradable Hydrogel Cubes and Spheres for Anti-Cancer Drug Delivery

Shape and responsiveness of nanoengineered delivery carriers are crucial characteristics for rapid and efficient delivery of therapeutics. We report on a novel type of micrometer-sized hydrogel particles of controlled shape with dual pH- and redox-sensitivity for intracellular delivery of anticancer drugs. The cubical and spherical poly(methacrylic acid) (PMAA) networks with disulfide links are obtained by cross-linking PMAA with cystamine within hydrogen-bonded multilayers of PMAA/poly(vinylpyrrolidone) (PMAA/PVPON) on sacrificial mesoporous templates. The pH-triggered hydrogel swelling/shrinkage not only affords effective doxorubicin entrapment but also efficient endosomal/lysosomal escape, and redox-triggered degradation provides drug release into the cytosolic space. The hydrogels degrade rapidly to low molecular weight chains in the presence of the typical intracellular concentration of glutathione, which should ensure a rapid renal clearance in vivo. Particle shape is found to affect internalization at the initial step of cell-particle interactions. Drug-loaded spherical particles are found to be 12% more cytotoxic than the corresponding cubes within the first 10 h of cell incubation suggesting more rapid internalization of spheres. Both doxorubicin-loaded hydrogel cubes and spheres demonstrate 50% and 90% cytotoxicity when incubated with HeLa cancer cells for 24 and 48 h, respectively. The presented approach integrates the advantages of pH-sensitivity, enzymatic degradation, and shape-regulated internalization for novel types of "intelligent" three-dimensional networks with programmable behavior for use in controlled delivery of therapeutics.