All-dielectric metamaterials

Near field focusing by edge diffraction

Spherical microparticles have the ability for nonresonant focusing of light in the near field zone, forming nanojet (NJ) beams. Arbitrary-shaped microstructures, with wavelength-scale dimensions, may offer similar functionality with lower fabrication complexity. The focusing properties are ruled by the edge diffraction phenomenon. The diffraction of light on the edge of a dielectric microstructure forms a tilted focused beam whose deviation angle depends on the index ratio between the structure material and host medium. The beam geometry and field intensity enhancement can be tuned by varying the curvature of the edge line. Interference of edge diffracted waves from different segments of the edge line creates a condensed beam in the near field zone, the photonic nanojet.

All-Dielectric Metasurfaces with High-Fluorescence-Enhancing Capability

All-dielectric metasurfaces are an emerging subfield in photonics. Light-wave manipulation has been extensively explored in these metasurfaces. Although light–matter interaction has also been investigated in these metasurfaces, only a limited number of studies have been reported to date. Here, we employ Si-rod-array metasurfaces to examine their fluorescence-enhancing capability. They were designed to have prominent resonances at the working wavelengths of fluorescent molecules. As a result, we experimentally observed significant fluorescence intensity enhancement, exceeding 1000-fold for a reference substrate that was a non-enhancing, flat Si wafer. Thus, we conclude that the all-dielectric metasurfaces can potentially serve as highly fluorescence-enhancing platforms. Their performance is comparable to the best performance reported for metallic metasurfaces. These results strongly suggest that all-dielectric metasurfaces can contribute to fluorescence-sensing of diverse molecules, including biomolecules.

Flexible Polyimide Nanocomposites with dc Bias Induced Excellent Dielectric Tunability and Unique Nonpercolative Negative- k toward Intrinsic Metamaterials

Intrinsic metamaterials with negative- k that originated from random-structured materials have drawn increasing attention. Currently, intrinsic negative- k was mainly achieved in percolative composites by tailoring the compositions and microstructures. Herein, plasmalike negative- k was successfully achieved in multiwalled carbon nanotubes (MWCNT)/polyimide (PI) nanocomposites via applying external dc bias which exhibited excellent capability in conveniently and accurately adjusting negative- k. Mechanism analysis indicated that the localized charges at the interfaces between MWCNT and PI became delocalized after gaining energy from the dc bias, resulting in elevated concentration of delocalized charges, and hence the enhanced negative- k. Furthermore, it is surprising to observe that negative- k also appeared in multilayer nanocomposites consisting of alternating BaTiO₃/PI and PI layers, in which there was no percolative conducting network. On the basis of systematic analysis, it is proposed that the unique nonpercolative negative- k resulted from the mutual competition between plasma oscillations of delocalized charges and polarizations of localized charges. Negative- k appeared once the polarizations were overwhelmed by plasma oscillations. This work demonstrated that applying dc bias is a promising way to achieve highly tailorable negative- k. Meanwhile, the observation of unique nonpercolative negative- k and the clarification of underlying mechanisms offer new insights into negative- k metamaterials, which will greatly facilitate the exploration of high-performance electromagnetic metamaterials.

Resonant laser printing of bi-material metasurfaces: from plasmonic to photonic optical response

Metasurfaces are nanostructured surfaces with engineered optical properties - currently impacting many branches of optics, from miniaturization of optical components to realizing high-resolution structural colors. The optical properties of metasurfaces can be traced to the individual meta-atoms, which set the nature of the optical response, e.g., plasmonic for metallic meta-atoms or photonic for dielectric meta-atoms. Combining multiple types of responses opens up new horizons in design of optical materials, but has so far been avoided due to the fabrication difficulties associated with constructing a metasurface composed of several meta-atom materials. Here, we present a multi-material design approach by optically post-processing a metasurface constructed from self-assembled polystyrene spheres coated with silver. Using our concept of resonant laser printing, we locally alter the initial plasmonic response of the meta-atoms to a pure photonic response. Our work constitutes a conceptually different way of designing metasurfaces and can pave the way for realizing multi-material metasurfaces on large areas while being cost effective.

Wide-angle optical half-wave plate from the field transformation approach and form-birefringence theory

In this paper, we theoretically design and analyse a wide-angle optical half-wave plate by combining the field transformation (FT) approach with the form-birefringence theory. The FT method is a general approach to manipulate electromagnetic wave propagations from pre-defined boundary conditions and artificial media by design. In theory, the approach is valid for both parallel and perpendicular polarizations. In practice, the resulting medium can be mimicked by a form-birefringent structure which has the same dispersion properties for a wide range of incident angles. A proof concept design for optical half-wave plate is designed for near-infrared operations. The transmittance of proposed device is greater than 0.8 with a polarized state change under 75° oblique incidence.

Chiral visible light metasurface patterned in monocrystalline silicon by focused ion beam

High refractive index makes silicon the optimal platform for dielectric metasurfaces capable of versatile control of light. Among various silicon modifications, its monocrystalline form has the weakest visible light absorption but requires a careful choice of the fabrication technique to avoid damage, contamination or amorphization. Presently prevailing chemical etching can shape thin silicon layers into two-dimensional patterns consisting of strips and posts with vertical walls and equal height. Here, the possibility to create silicon nanostructure of truly tree-dimensional shape by means of the focused ion beam lithography is explored, and a 300 nm thin film of monocrystalline epitaxial silicon on sapphire is patterned with a chiral nanoscale relief. It is demonstrated that exposing silicon to the ion beam causes a substantial drop of the visible transparency, which, however, is completely restored by annealing with oxidation of the damaged surface layer. As a result, the fabricated chiral metasurface combines high (50–80%) transmittance with the circular dichroism of up to 0.5 and the optical activity of up to 20° in the visible range. Being also remarkably durable, it possesses crystal-grade hardness, heat resistance up to 1000 °C and the inertness of glass.

Enabling silicon-on-silicon photonics with pedestalled Mie resonators

High-refractive-index Mie resonators are regarded as promising building blocks for low-loss all-dielectric nanophotonic applications. To avoid the otherwise excessive damping and loss of symmetry such devices typically need to be implemented over a low-index substrate, which hampers their integration in many practical applications. In this paper we propose a new photonic structure consisting of silicon-on-silicon spheroidal-like resonators, each one supported by a slim silicon pedestal that makes the micro-cavities stand optically separated from the substrate while providing both mechanical stability and electrical contact with the substrate. These structures are produced in high-quality monocrystalline Si and their size and arrangement can be precisely controlled through standard lithography. We demonstrate that such structures present an optical performance similar to the one achieved with low-index substrates, opening new avenues for developing novel hybrid photonic/electronic devices.

Lighting up silicon nanoparticles with Mie resonances

As one of the most important semiconductors, silicon has been used to fabricate electronic devices, waveguides, detectors, solar cells, etc. However, the indirect bandgap and low quantum efficiency (10-7) hinder the use of silicon for making good emitters. For integrated photonic circuits, silicon-based emitters with sizes in the range of 100-300 nm are highly desirable. Here, we show the use of the electric and magnetic resonances in silicon nanoparticles to enhance the quantum efficiency and demonstrate the white-light emission from silicon nanoparticles with feature sizes of ~200 nm. The magnetic and electric dipole resonances are employed to dramatically increase the relaxation time of hot carriers, while the magnetic and electric quadrupole resonances are utilized to reduce the radiative recombination lifetime of hot carriers. This strategy leads to an enhancement in the quantum efficiency of silicon nanoparticles by nearly five orders of magnitude as compared with bulk silicon, taking the three-photon-induced absorption into account.

Adaptive Genetic Algorithm for Optical Metasurfaces Design

As optical metasurfaces become progressively ubiquitous, the expectations from them are becoming increasingly complex. The limited number of structural parameters in the conventional metasurface building blocks, and existing phase engineering rules do not completely support the growth rate of metasurface applications. In this paper, we present digitized-binary elements, as alternative high-dimensional building blocks, to accommodate the needs of complex-tailorable-multifunctional applications. To design these complicated platforms, we demonstrate adaptive genetic algorithm (AGA), as a powerful evolutionary optimizer, capable of handling such demanding design expectations. We solve four complex problems of high current interest to the optics community, namely, a binary-pattern plasmonic reflectarray with high tolerance to fabrication imperfections and high reflection efficiency for beam-steering purposes, a dual-beam aperiodic leaky-wave antenna, which diffracts TE and TM excitation waveguides modes to arbitrarily chosen directions, a compact birefringent all-dielectric metasurface with finer pixel resolution compared to canonical nano-antennas, and a visible-transparent infrared emitting/absorbing metasurface that shows high promise for solar-cell cooling applications, to showcase the advantages of the combination of binary-pattern metasurfaces and the AGA technique. Each of these novel applications encounters computational and fabrication challenges under conventional design methods, and is chosen carefully to highlight one of the unique advantages of the AGA technique. Finally, we show that large surplus datasets produced as by-products of the evolutionary optimizers can be employed as ingredients of the new-age computational algorithms, such as, machine learning and deep leaning. In doing so, we open a new gateway of predicting the solution to a problem in the fastest possible way based on statistical analysis of the datasets rather than researching the whole solution space.

Vacuum induced transparency in metamaterials

For the cavity-based electromagnetically induced transparent (EIT), as the coherent driving field is enhanced by the optical cavity, the weak probe field can propagate through the atomic ensemble without absorption even if the driving field is weak. The extreme case of vacuum in the cavity is called "vacuum-induced transparency" (VIT) to distinguish it from the cavity EIT. Here we construct a new kind of cavity made of Metamaterials, i.e. ε-negative (EN) and μ-negative (MN) slabs, and study the VIT phenomena of the atomic ensemble doped within it. When the impedances of the MN and EN slabs are matched to each other and the dissipation of the material is small, it behaves as a surface plasmon cavity with a huge Q factor. And the VIT phenomenon in this cavity appears. By adjusting the position of atoms, the coupling strength between the atom and the structure could be changed. Two kinds of extremes of VIT, the coherent population trapping (CPT) and the Autler-Townes splitting (ATS), can be achieved in this system easily. Our proposal could be used in the realization of ultra-strong coupling and integrated devices on quantum memory or optical switch.

Probing vectorial near field of light: imaging theory and design principles of nanoprobes

Near-field microscopy is widely used for characterizing electromagnetic fields at nanoscale, where nanoprobes afford the opportunity to extract subwavelength optical quantities, including the amplitude, phase, polarization, chirality, etc. However, owing to the complexity of various nanoprobes, a general and intuitive theory is highly desired to assess the vectorial responses of nanoprobes and interpret the mechanism of the probe-field interaction. Here, we develop a general imaging theory based on the reciprocity of electromagnetism and multipole expansion analysis. The proposed theory closely resembles the multipolar Hamiltonian for light-matter interaction energy, revealing the coupling mechanism of the probe-field interaction. Based on this theory, we introduce a new paradigm for the design of functional nanoprobes by analyzing the reciprocal dipole moments, and establish effective design principles for the imaging of vectorial near fields. As application examples of the proposed theory, we numerically analyze the responses of two typical probes, a split-ring probe and a nanoparticle probe, which can quantitatively reproduce and well explain the experimental results of previously reported measurements of the optical magnetism and the transverse spin angular momentum. Our work provides a powerful tool for the design and analysis of new functional probes that may enable the probing of various physical quantities of the vectorial near field.

Perfect ultraviolet absorption in graphene using the magnetic resonance of an all-dielectric nanostructure

The enhancement of light-matter interaction for monolayer graphene is of great importance on many photonic and optoelectronic applications. With the aim of perfect ultraviolet trapping on monolayer graphene, we adopt the design of an all-dielectric nanostructure, in which the magnetic resonance of optical field is combined with an ultraviolet mirror. The physics inside is revealed in comparison with the conventional plasmonic perfect absorber, and various influence factors of absorption bands are systematically investigated. In the ultraviolet range, an optimized absorbance ratio up to 99.7% is reached, which is 10 times more than that of the suspended graphene, and the absorption bands are linearly reconfigurable by angular manipulation of incident light. The scheme for perfect ultraviolet trapping in a sub-nanometer scale paves the way for developing more promising ultraviolet devices based on graphene and potentially other 2D materials.

Controlling optical polarization conversion with Ge2Sb2Te5-based phase-change dielectric metamaterials

Recent progress in the metamaterial-based polarization manipulation of light highlights the promise of novel polarization-dependent optical components and systems. To overcome the limited frequency bandwidth of metamaterials resulting from their resonant nature, it is desirable to incorporate tunability into metamaterial-based polarization manipulations. Here, we propose a dielectric metamaterial for controlling linear polarization conversion using the phase-change characteristic of Ge2Sb2Te5 (GST), whose refractive index changes significantly when transforming from the amorphous phase to the crystalline phase under external stimuli. The polarization conversion phenomena are systematically studied using different arrangements of GST in this metamaterial. The performance of linear polarization conversion and the tunability are also analyzed and compared in three different designs. It is found that phase-change materials such as GST can be employed in dielectric materials for tunable and switchable linear polarization conversion in the telecom band. The conversion efficiency can be significantly modulated during the phase transition. Our results provide useful insights for incorporating phase-change materials with metamaterials for tunable polarization manipulation.

An all-dielectric metasurface as a broadband optical frequency mixer

A frequency mixer is a nonlinear device that combines electromagnetic waves to create waves at new frequencies. Mixers are ubiquitous components in modern radio-frequency technology and microwave signal processing. The development of versatile frequency mixers for optical frequencies remains challenging: such devices generally rely on weak nonlinear optical processes and, thus, must satisfy phase-matching conditions. Here we utilize a GaAs-based dielectric metasurface to demonstrate an optical frequency mixer that concurrently generates eleven new frequencies spanning the ultraviolet to near-infrared. The even and odd order nonlinearities of GaAs enable our observation of second-harmonic, third-harmonic, and fourth-harmonic generation, sum-frequency generation, two-photon absorption-induced photoluminescence, four-wave mixing and six-wave mixing. The simultaneous occurrence of these seven nonlinear processes is assisted by the combined effects of strong intrinsic material nonlinearities, enhanced electromagnetic fields, and relaxed phase-matching requirements. Such ultracompact optical mixers may enable a plethora of applications in biology, chemistry, sensing, communications, and quantum optics.

Terahertz rare-earth orthoferrite metamaterials by 3-D direct writing technology

Terahertz (THz) radiation excites electronic and optical modes of many materials, and controlling interaction of these materials with THz pulses provides a fascinating avenue to achieve unprecedented functionalities in return. Here, woodpile-structured rare-earth orthoferrite metamaterials built with 3-D direct ink writing technology are proposed and experimentally demonstrated. Polarization-independent THz refraction and switching of resonances by varying the number of layers in the structure, as well as the structural parameters and specimen support angle are achieved. Such all-rare-earth-orthoferrite dielectric metamaterials are easy to fabricate and can be very promising in developing efficient and low cost THz functional metadevices.

Anapoles in Free-Standing III-V Nanodisks Enhancing Second-Harmonic Generation

Nonradiating electromagnetic configurations in nanostructures open new horizons for applications due to two essential features: a lack of energy losses and invisibility to the propagating electromagnetic field. Such radiationless configurations form a basis for new types of nanophotonic devices, in which a strong electromagnetic field confinement can be achieved together with lossless interactions between nearby components. In our work, we present a new design of free-standing disk nanoantennas with nonradiating current distributions for the optical near-infrared range. We show a novel approach to creating nanoantennas by slicing III-V nanowires into standing disks using focused ion-beam milling. We experimentally demonstrate the suppression of the far-field radiation and the associated strong enhancement of the second-harmonic generation from the disk nanoantennas. With a theoretical analysis of the electromagnetic field distribution using multipole expansions in both spherical and Cartesian coordinates, we confirm that the demonstrated nonradiating configurations are anapoles. We expect that the presented procedure of designing and producing disk nanoantennas from nanowires becomes one of the standard approaches to fabricating controlled chains of standing nanodisks with different designs and configurations. These chains can be essential building blocks for new types of lasers and sensors with low power consumption.

Metasurface Enabled Wide-Angle Fourier Lens

Fourier optics, the principle of using Fourier transformation to understand the functionalities of optical elements, lies at the heart of modern optics, and it has been widely applied to optical information processing, imaging, holography, etc. While a simple thin lens is capable of resolving Fourier components of an arbitrary optical wavefront, its operation is limited to near normal light incidence, i.e., the paraxial approximation, which puts a severe constraint on the resolvable Fourier domain. As a result, high-order Fourier components are lost, resulting in extinction of high-resolution information of an image. Other high numerical aperture Fourier lenses usually suffer from the bulky size and costly designs. Here, a dielectric metasurface consisting of high-aspect-ratio silicon waveguide array is demonstrated experimentally, which is capable of performing 1D Fourier transform for a large incident angle range and a broad operating bandwidth. Thus, the device significantly expands the operational Fourier space, benefitting from the large numerical aperture and negligible angular dispersion at large incident angles. The Fourier metasurface will not only facilitate efficient manipulation of spatial spectrum of free-space optical wavefront, but also be readily integrated into micro-optical platforms due to its compact size.

Metasurface-assisted orbital angular momentum carrying Bessel-Gaussian Laser: proposal and simulation

Bessel-Gaussian beams have distinct properties of suppressed diffraction divergence and self-reconstruction. In this paper, we propose and simulate metasurface-assisted orbital angular momentum (OAM) carrying Bessel-Gaussian laser. The laser can be regarded as a Fabry-Perot cavity formed by one partially transparent output plane mirror and the other metasurface-based reflector mirror. The gain medium of Nd:YVO₄ enables the lasing wavelength at 1064 nm with a 808 nm laser serving as the pump. The sub-wavelength structure of metasurface facilitates flexible spatial light manipulation. The compact metasurface-based reflector provides combined phase functions of an axicon and a spherical mirror. By appropriately selecting the size of output mirror and inserting mode-selection element in the laser cavity, different orders of OAM-carrying Bessel-Gaussian lasing modes are achievable. The lasing Bessel-Gaussian₀, Bessel-Gaussian₀₁⁺, Bessel-Gaussian₀₂⁺ and Bessel-Gaussian₀₃⁺ modes have high fidelities of ~0.889, ~0.889, ~0.881 and ~0.879, respectively. The metasurface fabrication tolerance and the dependence of threshold power and output lasing power on the length of gain medium, beam radius of pump and transmittance of output mirror are also discussed. The obtained results show successful implementation of metasurface-assisted OAM-carrying Bessel-Gaussian laser with favorable performance. The metasurface-assisted OAM-carrying Bessel-Gaussian laser may find wide OAM-enabled communication and non-communication applications.

Tunable Resonance Coupling in Single Si Nanoparticle-Monolayer WS2 Structures

Two-dimensional semiconducting transition metal dichalcogenides (TMDCs) are extremely attractive materials for optoelectronic applications in the visible and near-infrared range. Coupling these materials to optical nanocavities enables advanced quantum optics and nanophotonic devices. Here, we address the issue of resonance coupling in hybrid exciton-polariton structures based on single Si nanoparticles (NPs) coupled to monolayer (1L)-WS₂. We predict a strong coupling regime with a Rabi splitting energy exceeding 110 meV for a Si NP covered by 1L-WS₂ at the magnetic optical Mie resonance because of the symmetry of the mode. Further, we achieve a large enhancement in the Rabi splitting energy up to 208 meV by changing the surrounding dielectric material from air to water. The prediction is based on the experimental estimation of TMDC dipole moment variation obtained from the measured photoluminescence spectra of 1L-WS₂ in different solvents. An ability of such a system to tune the resonance coupling is realized experimentally for optically resonant spherical Si NPs placed on 1L-WS₂. The Rabi splitting energy obtained for this scenario increases from 49.6 to 86.6 meV after replacing air by water. Our findings pave the way to develop high-efficiency optoelectronic, nanophotonic, and quantum optical devices.

Advances in optical metasurfaces: fabrication and applications [Invited]

The research and development of optical metasurfaces has been primarily driven by the curiosity for novel optical phenomena that are unattainable from materials that exist in nature and by the desire for miniaturization of optical devices. Metasurfaces constructed of artificial patterns of subwavelength depth make it possible to achieve flat, ultrathin optical devices of high performance. A wide variety of fabrication techniques have been developed to explore their unconventional functionalities which in many ways have revolutionized the means with which we control and manipulate electromagnetic waves. The relevant research community could benefit from an overview on recent progress in the fabrication and applications of the metasurfaces. This review article is intended to serve that purpose by reviewing the state-of-the-art fabrication methods and surveying their cutting-edge applications.

Controlling evanescent waves using silicon photonic all-dielectric metamaterials for dense integration

Ultra-compact, densely integrated optical components manufactured on a CMOS-foundry platform are highly desirable for optical information processing and electronic-photonic co-integration. However, the large spatial extent of evanescent waves arising from nanoscale confinement, ubiquitous in silicon photonic devices, causes significant cross-talk and scattering loss. Here, we demonstrate that anisotropic all-dielectric metamaterials open a new degree of freedom in total internal reflection to shorten the decay length of evanescent waves. We experimentally show the reduction of cross-talk by greater than 30 times and the bending loss by greater than 3 times in densely integrated, ultra-compact photonic circuit blocks. Our prototype all-dielectric metamaterial-waveguide achieves a low propagation loss of approximately 3.7±1.0 dB/cm, comparable to those of silicon strip waveguides. Our approach marks a departure from interference-based confinement as in photonic crystals or slot waveguides, which utilize nanoscale field enhancement. Its ability to suppress evanescent waves without substantially increasing the propagation loss shall pave the way for all-dielectric metamaterial-based dense integration.

Miniaturization of optical components could give way to dense photonic-integrated circuits. Here, the authors demonstrate the control of evanescent waves using all-dielectric metamaterials and show that they can reduce cross-talk and bending loss, which limit the integration density in photonic circuits.

Flexible and tunable terahertz all-dielectric metasurface composed of ceramic spheres embedded in ferroelectric/ elastomer composite

Terahertz (THz) all-dielectric metasurfaces made of high-index and low-loss resonators have attracted more and more attention due to their versatile properties. However, the all-dielectric metasurfaces in THz suffer from limited bandwidth and low tunability. Meanwhile, they are usually fabricated on flat and rigid substrates, and consequently their applications are restricted. Here, a simple approach is proposed and experimentally demonstrated to obtain a flexible and tunable THz all-dielectric metasurface. In this metasurface, micro ceramic spheres (ZrO₂) are embedded in a ferroelectric (strontium titanate) / elastomer (polydimethylsiloxane) composite. It is shown that the Mie resonances in micro ceramic spheres can be thermally and reversibly tuned resulting from the temperature dependent permittivity of the ferroelectric / PDMS composite. This metasurface characterized by flexibility and tunability is expected to have a more extensive application in active THz devices.

A 3D spatial spectral integral equation method for electromagnetic scattering from finite objects in a layered medium

The generalization of a two-dimensional spatial spectral volume integral equation to a three-dimensional spatial spectral integral equation formulation for electromagnetic scattering from dielectric objects in a stratified dielectric medium is explained. In the spectral domain, the Green function, contrast current density, and scattered electric field are represented on a complex integration manifold that evades the poles and branch cuts that are present in the Green function. In the spatial domain, the field-material interactions are reformulated by a normal-vector field approach, which obeys the Li factorization rules. Numerical evidence is shown that the computation time of this method scales as O ( N log N ) on the number of unknowns. The accuracy of the method for three numerical examples is compared to a finite element method reference.

Ultra-thin high-efficiency mid-infrared transmissive Huygens meta-optics

The mid-infrared (mid-IR) is a strategically important band for numerous applications ranging from night vision to biochemical sensing. Here we theoretically analyzed and experimentally realized a Huygens metasurface platform capable of fulfilling a diverse cross-section of optical functions in the mid-IR. The meta-optical elements were constructed using high-index chalcogenide films deposited on fluoride substrates: the choices of wide-band transparent materials allow the design to be scaled across a broad infrared spectrum. Capitalizing on a two-component Huygens’ meta-atom design, the meta-optical devices feature an ultra-thin profile (λ₀/8 in thickness) and measured optical efficiencies up to 75% in transmissive mode for linearly polarized light, representing major improvements over state-of-the-art. We have also demonstrated mid-IR transmissive meta-lenses with diffraction-limited focusing and imaging performance. The projected size, weight and power advantages, coupled with the manufacturing scalability leveraging standard microfabrication technologies, make the Huygens meta-optical devices promising for next-generation mid-IR system applications.

Mid-IR optics can require exotic materials or complicated processing, which can result in high cost and inferior quality. Here the authors report the demonstration of high-efficiency mid-IR transmissive lenses based on dielectric Huygens metasurface, showing diffraction limited focusing and imaging performance.

Numerical investigation of narrowband infrared absorber and sensor based on dielectric-metal metasurface

Metasurfaces are investigated intensively for biophotonics applications due to their resonant wavelength flexibly tuned in the near infrared region specially matching biological tissues. Here, we present numerically a metasurface structure combining dielectric resonance with surface plasmon mode of a metal plane, which is a perfect absorber with a narrow linewidth 10 nm wide and quality factor 120 in the near infrared regime. As a sensor, its bulk sensitivity and bulk figure of merit reach respectively 840 nm/RIU and 84/RIU, while its surface sensitivity and surface figure of merit are respectively 1 and 0.1/nm. For different types of adsorbate layers with the same thickness of 8 nm, its surface sensitivity and figure of merit are respectively 32.3 and 3.2/RIU. The enhanced electric field is concentrated on top of dielectric patch ends and in the patch ends simultaneously. Results show that the presented structure has high surface (and bulk) sensing capability in sensing applications due to its narrow linewidth and deep modulation depth. This could pave a new route toward dielectric-metal metasurface in biosensing applications, such as early disease detections and designs of neural stem cell sensing platforms.

Giant enhancement of Faraday rotation due to electromagnetically induced transparency in all-dielectric magneto-optical metasurfaces

In this Letter we introduce a new class of Fano-resonant all-dielectric metasurfaces for enhanced, high figure of merit magneto-optical response. The metasurfaces are formed by an array of magneto-optical bismuth-substituted yttrium iron garnet nano-disks embedded into a low-index matrix. The strong field enhancement in the magneto-optical disks, which results in over an order of magnitude enhancement of Faraday rotation, is achieved by engineering two (electric and magnetic) resonances. It is shown that while enhancement of rotation also takes place for spectrally detuned resonances, the resonant excitation inevitably results in stronger reflection and low figure of merit of the device. We demonstrate that this can be circumvented by overlapping electric and magnetic resonances of the nanodisks, yielding a sharp electromagnetically induced transparency peak in the transmission spectrum, which is accompanied by gigantic Faraday rotation. Our results show that one can simultaneously obtain a large Faraday rotation enhancement along with almost 100% transmittance in an all-dielectric metasurface as thin as 300 nm. A simple analytical model based on coupled-mode theory is introduced to explain the effects observed in first-principle finite element method simulations.

Metasurface-Based Polarimeters

The state of polarization (SOP) is an inherent property of light that can be used to gain crucial information about the composition and structure of materials interrogated with light. However, the SOP is difficult to experimentally determine since it involves phase information between orthogonal polarization states, and is uncorrelated with the light intensity and frequency, which can be easily determined with photodetectors and spectrometers. Rapid progress on optical gradient metasurfaces has resulted in the development of conceptually new approaches to the SOP characterization. In this paper, we review the fundamentals of and recent developments within metasurface-based polarimeters. Starting by introducing the concepts of generalized Snell’s law and Stokes parameters, we explain the Pancharatnam–Berry phase (PB-phase) which is instrumental for differentiating between orthogonal circular polarizations. Then we review the recent progress in metasurface-based polarimeters, including polarimeters, spectropolarimeters, orbital angular momentum (OAM) spectropolarimeters, and photodetector integrated polarimeters. The review is ended with a short conclusion and perspective for future developments.

Broadband microwave absorption utilizing water-based metamaterial structures

In this paper, broadband microwave absorbers utilizing water-based metamaterial structure elements have been proposed and investigated. We employ water into the metamaterial structure unit-cell of the absorber as primary resonant elements such as the water-droplet, or water-tube structure. By investigating the resonant modes and the coupling between the water elements and the surrounding dielectrics, it is found the inherent multi-resonance of the proposed metamaterial structures could result in a broadband microwave absorption. For water-droplets design, 90% microwave absorption has been achieved from 7.5 GHz to 15 GHz, while for water-tube design, a much broader bandwidth from 5 GHz to 15 GHz is obtained for nearly 90% microwave absorption. The broadband absorption performance has been verified by both full wave simulation and experimental measurement. We believe the proposed broadband water-based absorber may find some applications in microwave stealth and electromagnetic compatibility technology.

Anomalous refraction of a low divergence monochromatic light beam in a transparent slab

An exact formulation for the propagation of a monochromatic wave packet impinging on a transparent, homogeneous, isotropic, and parallel slab at oblique incidence is given. Approximate formulas are derived for low divergence light beams. These formulas show the presence of anomalous refraction phenomena at any slab thickness, including negative refraction and flat lensing effects, induced by reflection at the rear face.

Probing Adsorption Behaviors of BSA onto Chiral Surfaces of Nanoparticles

Chiral properties of nanoscale materials are of importance as they dominate interactions with proteins in physiological environments; however, they have rarely been investigated. In this study, a systematic investigation is conducted for the adsorption behaviors of bovine serum albumin (BSA) onto the chiral surfaces of gold nanoparticles (AuNPs), involving multiple techniques and molecular dynamic (MD) simulation. The adsorption of BSA onto both L- and D-chiral surfaces of AuNPs shows discernible differences involving thermodynamics, adsorption orientation, exposed charges, and affinity. As a powerful supplement, MD simulation provides a molecular-level understanding of protein adsorption onto nanochiral surfaces. Salt bridge interaction is proposed as a major driving force at protein-nanochiral interface interaction. The spatial distribution features of functional groups (COO^- , NH₃⁺ , and CH₃ ) of chiral molecules on the nanosurface play a key role in the formation and location of salt bridges, which determine the BSA adsorption orientation and binding strength to chiral surfaces. Sequentially, BSA corona coated on nanochiral surfaces affects their uptake by cells. The results enhance the understanding of protein corona, which are important for biological effects of nanochirality in living organisms.

Nanostructuring Multilayer Hyperbolic Metamaterials for Ultrafast and Bright Green InGaN Quantum Wells

Semiconductor quantum well (QW) light-emitting diodes (LEDs) have limited temporal modulation bandwidth of a few hundred MHz due to the long carrier recombination lifetime. Material doping and structure engineering typically leads to incremental change in the carrier recombination rate, whereas the plasmonic-based Purcell effect enables dramatic improvement for modulation frequency beyond the GHz limit. By stacking Ag-Si multilayers, the resulting hyperbolic metamaterials (HMMs) have shown tunability in the plasmonic density of states for enhancing light emission at various wavelengths. Here, nanopatterned Ag-Si multilayer HMMs are utilized for enhancing spontaneous carrier recombination rates in InGaN/GaN QWs. An enhancement of close to 160-fold is achieved in the spontaneous recombination rate across a broadband of working wavelengths accompanied by over tenfold enhancement in the QW peak emission intensity, thanks to the outcoupling of dominating HMM modes. The integration of nanopatterned HMMs with InGaN QWs will lead to ultrafast and bright QW LEDs with a 3 dB modulation bandwidth beyond 100 GHz for applications in high-speed optoelectronic devices, optical wireless communications, and light-fidelity networks.

Ultrathin Planar Cavity Metasurfaces

An ultrathin planar cavity metasurface is proposed based on ultrathin film interference and its practicability for light manipulation in visible region is experimentally demonstrated. Phase of reflected light is modulated by finely adjusting the thickness of amorphous silicon (a-Si) by a few nanometers on an aluminum (Al) substrate via nontrivial phase shifts at the interfaces and interference of multireflections generated from the planar cavity. A phase shift of π, the basic requirement for two-level phase metasurface systems, can be accomplished with an 8 nm thick difference. For proof of concept, gradient metasurfaces for beam deflection, Fresnel zone plate metalens for light focusing, and metaholograms for image reconstruction are presented, demonstrating polarization-independent and broadband characteristics. This novel mechanism for phase modulation with ultrathin planar cavity provides diverse routes to construct advanced flat optical devices with versatile applications.

Unidirectional emission in an all-dielectric nanoantenna

All-dielectric nanoantennas are a promising alternative to plasmonic optical antennas for engineering light emission because of their low-loss nature in the optical spectrum. Nevertheless, it is still challenging to manipulate directional light emission with subwavelength all-dielectric nanoantennas. Here, we propose and numerically demonstrate that a hollow silicon nanodisk can serve as a versatile antenna for directing and enhancing the emission from either an electric or magnetic dipole emitter. When primarily coupled to both electric and magnetic dipole modes of a nanoantenna, broadband nearly-unidirectional emission can be realized by the interference of two modes, which can be spectrally tuned via the geometric parameters in an easy way. More importantly, the emission directions for the magnetic and electric dipole emitters are shown as opposite to each other through control of the phase difference between the induced magnetic and electric dipole modes of the antenna. Meanwhile, the Purcell factors can be enhanced by more than one order of magnitude and high quantum efficiencies can be maintained at the visible spectrum for both kinds of dipole emitters. We further show that these unidirectional emission phenomena can withstand small disorder effects of in-plane dipole orientation and location. Our study provides a simple yet versatile platform that can shape the emission of both magnetic and electric dipole emitters.

Real-Time Tunable Colors from Microfluidic Reconfigurable All-Dielectric Metasurfaces

Structural colors arising from all-dielectric nanostructures are very promising for high-resolution color nanoprinting and high-density optical storage. However, once the all-dielectric nanostructures are fabricated, their optical performances are usually static or change slowly, significantly limiting the practical applications in advanced displays. Herein, we experimentally demonstrate the real-time tunable colors with microfluidic reconfigurable all-dielectric metasurfaces. The metasurface is composed of an array of TiO₂ nanoblocks, which are embedded in a polymeric microfluidic channel. By injecting solutions with a different refractive index into the channel, the narrow band reflection peak and the corresponding distinct colors of a TiO₂ metasurface can be precisely controlled. The transition time is as small as 16 ms, which is orders of magnitude faster than the current techniques. By varying the lattice size of TiO₂ metasurfaces, the real-time tunable colors are able to span the entire visible spectrum. Meanwhile, the injection and ejection of solvent have also shown the capability of the erasion and the restoration of information encoded in TiO₂ metasurfaces. The combination of all-dielectric nanostructures with microfluidic channels shall boost their applications in functional color display, banknote security, anticounterfeiting, and point-of-care devices.

Programming Nanoparticles in Multiscale: Optically Modulated Assembly and Phase Switching of Silicon Nanoparticle Array

Manipulating and tuning nanoparticles by means of optical field interactions is of key interest for nanoscience and applications in electronics and photonics. We report scalable, direct, and optically modulated writing of nanoparticle patterns (size, number, and location) of high precision using a pulsed nanosecond laser. The complex nanoparticle arrangement is modulated by the laser pulse energy and polarization with the particle size ranging from 60 to 330 nm. Furthermore, we report fast cooling-rate induced phase switching of crystalline Si nanoparticles to the amorphous state. Such phase switching has usually been observed in compound phase change materials like GeSbTe. The ensuing modification of atomic structure leads to dielectric constant switching. Based on these effects, a multiscale laser-assisted method of fabricating Mie resonator arrays is proposed. The number of Mie resonators, as well as the resonance peaks and dielectric constants of selected resonators, can be programmed. The programmable light-matter interaction serves as a mechanism to fabricate optical metasurfaces, structural color, and multidimensional optical storage devices.

Polarization management based on dipolar interferences and lattice couplings

We have achieved efficient polarization manipulations based on dipolar interferences and lattice couplings in one-dimensional cylindrical metalattices. First, we employ the scattering asymmetry factor g to quantify the directional scattering ability and find the maximum |g|_max=1/2 for a cylinder with effective excitations of electric and magnetic dipoles simultaneously. Further, the strong negative-g (gp = -0.38) for p-polarization and positive-g (gs = 0.68) for s-polarization are obtained within a narrow visible band using c-Si with experimental data. Inspired by the polarization-dependent phenomena, we design a metalattice-based linear polarizer considering lattice effects with an optimal particle arrangement. The metalattice performs near-perfect reflection for p-polarized waves but with zero reflection for s-polarized waves with large extinction ratios for transmission (17 dB) and reflection (24 dB). The perfect functionalities can be attributed to the near-field lattice couplings with dipolar interferences. And, we reveal that the polarization-dependent scattering coefficients, which are sensitive to the lattice period, can be largely tuned owing to lattice effects, therefore contributing to modifying far-field scattering patterns. More specifically, the proposed linear polarizers also show robust and reliable functionalities when considering lattice imperfections, the effects of system sizes, oblique incident angles, and the tunbility for different working wavelengths. The present study paves a way to stimulate many advanced practical implements based on multipolar interferences and lattice couplings.

Designer Shape Anisotropy on Transition-Metal-Dichalcogenide Nanosheets

MoS₂ and generally speaking, the wide family of transition-metal dichalcogenides represents a solid nanotechnology platform on which to engineer a wealth of new and outperforming applications involving 2D materials. An even richer flexibility can be gained by extrinsically inducing an in-plane shape anisotropy of the nanosheets. Here, the synthesis of anisotropic MoS₂ nanosheets is proposed as a prototypical example in this respect starting from a highly conformal chemical vapor deposition on prepatterend substrates and aiming at the more general purpose of tailoring anisotropy of 2D nanosheets by design. This is envisioned to be a suitable configuration for strain engineering as far as strain can be spatially redistributed in morphologically different regions. With a similar approach, both the optical and electronic properties of the 2D transition-metal dichalcogenides can be tailored over macroscopic sample areas in a self-organized fashion, thus paving the way for new applications in the field of optical metasurfaces, light harvesting, and catalysis.

Complete amplitude and phase control of light using broadband holographic metasurfaces

Reconstruction of light profiles with amplitude and phase information, called holography, is an attractive optical technology with various significant applications such as three-dimensional imaging and optical data storage. Subwavelength spatial control of both amplitude and phase of light is an essential requirement for an ideal hologram. However, traditional holographic devices suffer from their restricted capabilities of incomplete modulation in both amplitude and phase of visible light; this results in sacrifice of optical information and undesirable occurrences of critical noises in holographic images. Herein, we have proposed a novel metasurface that is capable of completely controlling both the amplitude and phase profiles of visible light independently with subwavelength spatial resolution. The full, continuous, and broadband control of both amplitude and phase was achieved using X-shaped meta-atoms based on the expanded concept of the Pancharatnam-Berry phase. The first experimental demonstrations of the complete complex-amplitude holograms with subwavelength definition at visible wavelengths were achieved, and excellent performances with a remarkable signal-to-noise ratio as compared to those of traditional phase-only holograms were obtained. Extraordinary control capability with versatile advantages of our metasurface paves a way to an ideal holography, which is expected to be a significant advancement in the field of optical holography and metasurfaces.

Optical Anapole Metamaterial

The toroidal dipole is a localized electromagnetic excitation independent from the familiar magnetic and electric dipoles. It corresponds to currents flowing along minor loops of a torus. Interference of radiating induced toroidal and electric dipoles leads to anapole, a nonradiating charge-current configuration. Interactions of induced toroidal dipoles with electromagnetic waves have recently been observed in artificial media at microwave, terahertz, and optical frequencies. Here, we demonstrate a quasi-planar plasmonic metamaterial, a combination of dumbbell aperture and vertical split-ring resonator, that exhibits transverse toroidal moment and resonant anapole behavior in the optical part of the spectrum upon excitation with a normally incident electromagnetic wave. Our results prove experimentally that toroidal modes and anapole modes can provide distinct and physically significant contributions to the absorption and dispersion of slabs of matter in the optical part of the spectrum in conventional transmission and reflection experiments.

Broadband imaging with one planar diffractive lens

We demonstrate imaging over the visible band using a single planar diffractive lens. This is enabled via multi-level diffractive optics that is designed to focus over a broad wavelength range, which we refer to as an achromatic diffractive lens (ADL). We designed, fabricated and characterized two ADLs with numerical apertures of 0.05 and 0.18. Diffraction-limited focusing is demonstrated for the NA = 0.05 lens with measured focusing efficiency of over 40% across the entire visible spectrum (450 nm to 750 nm). We characterized the lenses with a monochromatic and a color CMOS sensor, and demonstrated video imaging under natural sunlight and other broadband illumination conditions. We use rigorous electromagnetic simulations to emphasize that ADLs can achieve high NA (0.9) and large operating bandwidth (300 nm in the visible spectrum), a combination of metrics that have so far eluded other flat-lens technologies such as metalenses. These planar diffractive lenses can be cost-effectively manufactured over large areas and thereby, can enable the wide adoption of flat, low-cost lenses for a variety of imaging applications.

High-quality trapped modes in all-dielectric metamaterials

A planar all-dielectric metamaterial made of a double-periodic lattice whose unit cell consists of a single subwavelength dielectric particle having the form of a disk possessing a penetrating hole is considered. The resonant states in the transmitted spectra of the metamaterial are identified considering modes inherent to the individual cylindrical dielectric resonator. A correlation between the asymmetry in the particle's geometry, which arises from the off-centered displacement of the hole and the formation of the Mie-type and trapped modes, is established. The advantages of using a coaxial-sector notch instead of a round hole for the trapped mode excitation are explained.

Polarization Converter with Controllable Birefringence Based on Hybrid All-Dielectric-Graphene Metasurface

Previous studies on hybrid dielectric-graphene metasurfaces have been used to implement induced transparency devices, while exhibiting high Q-factors based on trapped magnetic resonances. Typically, the transparency windows are single wavelength and less appropriate for polarization conversion structures. In this work, a quarter-wave plate based on a hybrid silicon-graphene metasurface with controllable birefringence is numerically designed. The phenomena of trapped magnetic mode resonance and high Q-factors are modulated by inserting graphene between silicon and silica. This results in a broader transmission wavelength in comparison to the all-dielectric structure without graphene. The birefringence tunability is based on the dimensions of silicon and the Fermi energy of graphene. Consequently, a linear-to-circular polarization conversion is achieved at a high degree of 96%, in the near-infrared. Moreover, the polarization state of the scattered light is switchable between right and left hand circular polarizations, based on an external gate biasing voltage. Unlike in plasmonic metasurfaces, these achievements demonstrate an efficient structure that is free from radiative and ohmic losses. Furthermore, the ultrathin thickness and the compactness of the structure are demonstrated as key components in realizing integrable and CMOS compatible photonic sensors.

Chemically Responsive Elastomers Exhibiting Unity-Order Refractive Index Modulation

Chameleons are masters of light, expertly changing their color, pattern, and reflectivity in response to their environment. Engineered materials that share this tunability can be transformative, enabling active camouflage, tunable holograms, and novel colorimetric medical sensors. While progress has been made in creating artificial chameleon skin, existing schemes often require external power, are not continuously tunable, and may prove too stiff or bulky for applications. Here, a chemically tunable, large-area metamaterial is demonstrated that accesses a wide range of colors and refractive indices. An ordered monolayer of nanoresonators is fabricated, then its optical response is dynamically tuned by infiltrating its polymer substrate with solvents. The material shows a strong magnetic response with a dependence on resonator spacing that leads to a highly tunable effective permittivity, permeability, and refractive index spanning negative and positive values. The unity-order index tuning exceeds that of traditional electro-optic and photochromic materials and is robust to cycling, providing a path toward programmable optical elements and responsive light routing.

Gradient metasurfaces: a review of fundamentals and applications

In the wake of intense research on metamaterials the two-dimensional analogue, known as metasurfaces, has attracted progressively increasing attention in recent years due to the ease of fabrication and smaller insertion losses, while enabling an unprecedented control over spatial distributions of transmitted and reflected optical fields. Metasurfaces represent optically thin planar arrays of resonant subwavelength elements that can be arranged in a strictly or quasi periodic fashion, or even in an aperiodic manner, depending on targeted optical wavefronts to be molded with their help. This paper reviews a broad subclass of metasurfaces, viz. gradient metasurfaces, which are devised to exhibit spatially varying optical responses resulting in spatially varying amplitudes, phases and polarizations of scattered fields. Starting with introducing the concept of gradient metasurfaces, we present classification of different metasurfaces from the viewpoint of their responses, differentiating electrical-dipole, geometric, reflective and Huygens' metasurfaces. The fundamental building blocks essential for the realization of metasurfaces are then discussed in order to elucidate the underlying physics of various physical realizations of both plasmonic and purely dielectric metasurfaces. We then overview the main applications of gradient metasurfaces, including waveplates, flat lenses, spiral phase plates, broadband absorbers, color printing, holograms, polarimeters and surface wave couplers. The review is terminated with a short section on recently developed nonlinear metasurfaces, followed by the outlook presenting our view on possible future developments and perspectives for future applications.

Light Scattering by a Dielectric Sphere: Perspectives on the Mie Resonances

Light scattering by a small spherical particle, a central topic for electromagnetic scattering theory, is here considered. In this short review, some of the basic features of its resonant scattering behavior are covered. First, a general physical picture is described by a full electrodynamic perspective, the Lorenz–Mie theory. The resonant spectrum of a dielectric sphere reveals the existence of two distinctive types of polarization enhancement: the plasmonic and the dielectric resonances. The corresponding electrostatic (Rayleigh) picture is analyzed and the polarizability of a homogeneous spherical inclusion is extracted. This description facilitates the identification of the first type of resonance, i.e., the localized surface plasmon (plasmonic) resonance, as a function of the permittivity. Moreover, the electrostatic picture is linked with the plasmon hybridization model through the case of a step-inhomogeneous structure, i.e., a core–shell sphere. The connections between the electrostatic and electrodynamic models are reviewed in the small size limit and details on size-induced aspects, such as the dynamic depolarization and the radiation reaction on a small sphere are exposed through the newly introduced Mie–Padé approximative perspective. The applicability of this approximation is further expanded including the second type of resonances, i.e., the dielectric resonances. For this type of resonances, the Mie–Padé approximation reveals the main character of the two different cases of resonances of either magnetic or electric origin. A unified picture is therefore described encompassing both plasmonic and dielectric resonances, and the resonant conditions of all three different types are extracted as functions of the permittivity and the size of the sphere. Lastly, the directional scattering behavior of the first two dielectric resonances is exposed in a simple manner, namely the Kerker conditions for maximum forward and backscattering between the first magnetic and electric dipole contributions of a dielectric sphere. The presented results address several prominent functional features, aiming at readers with either theoretical or applied interest for the scattering aspects of a resonant sphere.

High Q-Factor Resonance in a Symmetric Array of All-Dielectric Bars

Strong electrical dipole resonance (ER) with high quality-factor (Q) (over several thousands) in a simple silicon all-dielectric rod arrays without asymmetric structure is achieved in the near infrared (NIR) wavelength range. According to numerical simulations, strong high order ER is excited by vertical incident plane waves with electric fields polarized perpendicular to the rod instead of parallel. The electric field coupling between adjacent rods is greatly enhanced by increasing the length of the rods, and the radiative loss of the ER is significantly depressed, thus achieving high Q resonances. In the meantime, the electric field enhancement both inside and surrounding the rod are greatly improved, which is conducive to many applications. The proposed all-dielectric metasurface is simple, low loss, Complementary Metal Oxide Semiconductor (CMOS) compatible, and can be applied in many fields, such as sensing, narrowband filters, optical modulations, and nonlinear interactions.

Optical magnetism in planar metamaterial heterostructures

Harnessing artificial optical magnetism has previously required complex two- and three-dimensional structures, such as nanoparticle arrays and split-ring metamaterials. By contrast, planar structures, and in particular dielectric/metal multilayer metamaterials, have been generally considered non-magnetic. Although the hyperbolic and plasmonic properties of these systems have been extensively investigated, their assumed non-magnetic response limits their performance to transverse magnetic (TM) polarization. We propose and experimentally validate a mechanism for artificial magnetism in planar multilayer metamaterials. We also demonstrate that the magnetic properties of high-index dielectric/metal hyperbolic metamaterials can be anisotropic, leading to magnetic hyperbolic dispersion in certain frequency regimes. We show that such systems can support transverse electric polarized interface-bound waves, analogous to their TM counterparts, surface plasmon polaritons. Our results open a route for tailoring optical artificial magnetism in lithography-free layered systems and enable us to generalize the plasmonic and hyperbolic properties to encompass both linear polarizations.

Most natural materials do not have a magnetic response at optical frequencies and inducing optical magnetism by metamaterials typically requires complex nanostructures. Here, Papadakis et al. show that artificial optical magnetism can also be achieved with planar multilayer metamaterials.

Nanoscale beam splitters based on gradient metasurfaces

Beam splitters are essential components in various optical and photonic applications, for example, interferometers, multiplexers, and so on. Present beam splitters based on cubes or plates are normally bulky. Realizing beam splitters in nanoscales is useful to reduce the total size of photonic devices. We demonstrate here a beam splitter with nanoscale thickness based on a gradient metasurface comprising lithium niobate cylinder arrays. Since one unit cell of metasurface comprising two cylinder rows shows two opposite phase gradients, the incident light is split into different directions according to the generalized Snell's law. The split ratio is proven to be effectively tunable.