Microsample determination of lovastatin and its hydroxy acid metabolite in mouse and rat plasma by liquid chromatography/ionspray tandem mass spectrometry

A Review of Red Yeast Rice, a Traditional Fermented Food in Japan and East Asia: Its Characteristic Ingredients and Application in the Maintenance and Improvement of Health in Lipid Metabolism and the Circulatory System

Red yeast rice has been used to produce alcoholic beverages and various fermented foods in China and Korea since ancient times; it has also been used to produce tofuyo (Okinawan-style fermented tofu) in Japan since the 18th century. Recently, monacolin K (lovastatin) which has cholesterol-lowering effects, was found in some strains of Monascus fungi. Since statins have been used world-wide as a cholesterol-lowering agent, processed foods containing natural statins are drawing attention as materials for primary prevention of life-style related diseases. In recent years, large-scale commercial production of red yeast rice using traditional solid-state fermentation has become possible, and various useful materials, including a variety of monascus pigments (polyketides) that spread as natural pigments, in addition to statins, are produced in the fermentation process. Red yeast rice has a lot of potential as a medicinal food. In this paper, we describe the history of red yeast rice as food, especially in Japan and East Asia, its production methods, use, and the ingredients with pharmacological activity. We then review evidence of the beneficial effects of red yeast rice in improving lipid metabolism and the circulatory system and its safety as a functional food.

Bioprospecting lovastatin production from a novel producer Cunninghamella blakesleeana

Beside anti-cholesterol activity, lovastatin garners worldwide attention for therapeutical application against various diseases especially cancer. A total of 36 filamentous fungi from soil samples were isolated and screened for lovastatin production by yeast growth bioassay method. C9 strain (later identified as Cunninghamella blakesleeana) was screened as potential strain of lovastatin production. Further confirmation of the compound was made using TLC, HPTLC and HPLC in which similar Rf value, densitogram peak and chromatogram peak against the standard lovastatin were observed, respectively. The purified lovastatin subjected for IR analysis showed a lactone ring peak at 1763.63 cm-1 similar to standard lovastatin. Further structural analysis including NMR and LC-MS of the purified lovastatin reassures the molecular formula and molecular weight similar to standard. In quantitative terms, C. blakesleeana, Aspergillus terreus and Aspergillus flavus produced 1.4 mg g-1 DWS, 0.83 mg g-1 DWS and 0.3 mg g-1 DWS of lovastatin, respectively, (p < 0.0001) without any optimization. Lovastatin showed significant antioxidant property with IC50: 145.9 µg mL-1 (140 µL), and the percentage of inhibition is maximum at 199.5 µg/mL which is statistically significant (p < 0.0001).

A Simple Protein Precipitation-based Simultaneous Quantification of Lovastatin and Its Active Metabolite Lovastatin Acid in Human Plasma by Ultra-Performance Liquid Chromatography-Tandem Mass Spectrometry using Polarity Switching

Lovastatin is an anti-cholesterol lactone drug indicated for the treatment of hyperlipidemia and to reduce the risk of coronary heart disease. It is converted to the β-hydroxy acid form (lovastatin acid) in vivo, which is the major pharmacologically active metabolite. Here, we describe the development and validation of an ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS)-based method utilizing polarity switching for the simultaneous quantification of lovastatin and lovastatin acid in human plasma. Simple protein precipitation extraction and direct injection of the extracted samples without drying/reconstitution showed good recoveries of both analytes (~70%). The developed method exhibited satisfactory intra-day and inter-day accuracy and precision. The interconversion between lovastatin and lovastatin acid during sample preparation and storage was minimal (< 1.9%). The lower limits of quantification were 0.5 and 0.2 nM (or 0.2 and 0.084 ng/mL) for lovastatin and lovastatin acid, respectively, using only 50 μL of plasma during extraction. The validated method was successfully applied to analyze plasma samples obtained from a healthy human subject who enrolled in a clinical drug interaction study involving lovastatin.

Validated LC-MS/MS method for simultaneous determination of SIM and its acid form in human plasma and cell lysate: Pharmacokinetic application

Simvastatin (SIM) is a 3-hydroxy-3-methylglutaryl coenzyme A reductase inhibitor widely used in hyperlipidemia therapy. SIM has recently been studied for its anticancer activity at doses higher than those used for the hyperlipidemia therapy. This prompted us to study the pharmacokinetics of high-dose SIM in cancer patients. For this purpose, an LC–MS/MS method was developed to measure SIM and its acid form (SIMA) in plasma and peripheral blood mononuclear cells (PBMCs) obtained from patients. Chromatographic analyte separation was carried out on a reverse-phase column using 75:25 (% v/v) acetonitrile:ammonium acetate (0.1 M, pH 5.0) mobile phase. Detection was performed on a triple quadrupole mass spectrometer, equipped with a turbo ion spray source and operated in positive ionization mode. The assay was linear over a range 2.5–500 ng/mL for SIM and 5–500 ng/mL for SIMA in plasma and 2.5–250 ng/mL for SIM and 5–250 ng/mL for SIMA in cell lysate. Recovery was >58% for SIM and >75% for SIMA in both plasma and cell lysate. SIM and SIMA were stable in plasma, cell lysate and the reconstitution solution. This method was successfully applied for the determination of SIM and SIMA in plasma and PBMCs samples collected in the pharmacokinetic study of high-dose SIM in cancer patients.

Determination of lovastatin in human plasma by ultra-performance liquid chromatography-electrospray ionization tandem mass spectrometry and its application in a pharmacokinetic study

A selective, rapid and sensitive ultra performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) method was developed for the quantitative determination of lovastatin in human plasma and its application in a pharmacokinetic study. With mycophenolate mofetil as internal standard, sample pretreatment involved a one-step extraction with tert-butyl methyl ether of 0.2 ml plasma. The analysis was carried out on an ACQUITY UPLCTM BEH C18 column (50 mm x 2.1 mm, i.d., 1.7 microm) with flow rate of 0.35 ml/min. The mobile phase was 20% water and 80% acetonitrile (v/v). The detection was performed on a triple-quadrupole tandem mass spectrometer by multiple reaction monitoring (MRM) mode via electrospray ionization (ESI). Linear calibration curves were obtained in the concentration range of 0.08-24.50 ng/ml, with a lower limit of quantification of 0.08 ng/ml. The intra- and inter-day precision (RSD) values were below 15% and accuracy (RE) was -7.6 to 9.3% at all QC levels. The method was applicable to clinical pharmacokinetic study of lovastatin in healthy volunteers following oral administration.

Locally delivered lovastatin nanoparticles enhance fracture healing in rats

Statins stimulate bone formation in vitro and in vivo and, when given in large doses or by prolonged infusions, stimulate biomechanical strength of murine long bones with healing fractures. However, administration of statins by large oral doses or prolonged infusions to a fracture site is not a feasible therapeutic approach to hasten healing of human fractures. We administered lovastatin in biodegradable polymer nanobeads of poly(lactic-co-glycolide acid) to determine if lovastatin delivered in low doses in nanoparticles of a therapeutically acceptable scaffold could increase rates of healing in a standard preclinical model of femoral fracture. We found that these nanobeads: (1) stimulated bone formation in vitro at 5 ng/mL, (2) increased rates of healing in femoral fractures when administered as a single injection into the fracture site, and (3) decreased cortical fracture gap at 4 weeks as assessed by microcomputed tomography. These preclinical results suggest that lovastatin administered in a nanobead preparation may be therapeutically useful in hastening repair of human fractures.

A liquid chromatography/tandem mass spectrometric multi-mycotoxin method for the quantification of 87 analytes and its application to semi-quantitative screening of moldy food samples

This paper describes the extension of a previously published method based on liquid chromatography/electrospray ionization tandem mass spectrometry (HPLC/ESI-MS/MS) from 39 to currently 87 analytes. Besides the mycotoxins for which regulated concentrations exist, the method now comprises not only almost all mycotoxins for which standards are commercially available, but also a number of other important metabolites produced by fungi involved in food spoilage. The method is based on a single extraction step using an acidified acetonitrile/water mixture followed by analysis of the diluted crude extract. Method performance characteristics were determined after spiking breadcrumbs as model matrix at multiple concentration levels. With very few exceptions, coefficients of variation of the whole procedure of <5% and repeatabilities at the highest spiking level of <7% were obtained. Limits of detection ranged between 0.02 and 225 microg kg(-1). The quantitative determination of ergopeptides was disturbed by epimerization due to the acidic conditions. From the remaining 77 analytes, the apparent recoveries of nine substances deviated significantly from the CEN target range of 70-110% due to incomplete extraction and/or matrix effects. In principle, the latter can be compensated for by the application of matrix-matched calibration. The developed method was applied to 18 moldy samples (including bread, fruits, vegetables, jam, cheese, chestnuts and red wine) from private households. This study revealed the great value of the described method: 37 different fungal metabolites were identified at concentrations of up to 33 mg kg(-1), and some of these have never been reported before in the context of moldy food products.

Effect of Simvastatin Administration on Periodontitis-Associated Bone Loss in Ovariectomized Rats

BACKGROUND

Hydroxyl methylglutaryl-coenzyme A reductase inhibitors, so-called statins, have been widely used for hyperlipidemic patients. Recently, it has been reported that they promote bone formation. The purpose of this study was to evaluate the effect of simvastatin on ligature-induced bone resorption in the mandible of the ovariectomized rat.

METHODS

Forty-nine rats were divided into seven groups; ligature was placed in all groups except group 7, which was considered the sham group: group 1 (N = 7), ovariectomy (OVX) plus simvastatin (10(-6) M); group 2 (N = 7), OVX plus simvastatin (3 x 10(-7) M); group 3 (N = 7), OVX plus simvastatin (10(-7) M); group 4 (N = 7), OVX plus normal saline; group 5 (N = 7), OVX group; group 6 (N = 7), ligature without OVX; and group 7 (N = 7), sham surgery without OVX and ligature. Simvastatin was administered subperiosteally in the buccal fold of the bottom right first molar twice a week during the study. Four weeks after insertion of the ligatures, the animals were sacrificed. Mandibles were removed for radiologic and histologic analysis. Bone density, bone loss (BL), and attachment loss were measured. Analysis of variance (ANOVA) was used to compare groups.

RESULTS

Histologic analysis showed that the simvastatin groups developed significantly less periodontal breakdown (P <0.05). BL was less in the simvastatin experimental group, but there was not a significant statistical difference between the simvastatin groups (groups 1 through 3) and the experimental control groups (groups 5 and 6; P >0.05).

CONCLUSION

Within the limits of this study, it can be concluded that simvastatin shows protective features against the impact of periodontitis on attachment apparatus and alveolar bone.

Chromatography–mass spectrometry methods for the quantitation of statins in biological samples

The 3-hydroxy-3-methyl glutaryl coenzyme A (HMG-CoA) reductase inhibitors, more commonly known as 'statins', are a novel class of drugs widely used for the treatment of hypercholesterolaemia in patients with established cardiovascular disease as well as those at high risk of developing atherosclerosis. Published chromatographic-mass spectrometric methods for the quantification of presently available seven statins, atorvastatin, simvastatin, lovastatin, pravastatin, fluvastatin, rosuvastatin and pitavastatin are reviewed. High performance liquid chromatography (HPLC) in combination with tandem mass spectrometry (MS/MS) is the analytical technique of choice for the quantification of statins in biological samples. This review envisages that most of the methods used for quantification of statins are in plasma and they are suitable for therapeutic drug monitoring of these drugs.

Preparation, characterization, and in vitro and in vivo evaluation of lovastatin solid lipid nanoparticles

The purpose of this research was to study whether the bioavailability of lovastatin could be improved by administering lovastatin solid lipid nanoparticles (SLN) duodenally to rats. Lovastatin SLN were developed using triglycerides by hot homogenization followed by ultrasonication. Particle size and zeta potential were measured by photon correlation spectroscopy. The solid state of the drug in the SLN and lipid modification were characterized. Bioavailability studies were conducted in male Wistar rats after intraduodenal administration of lovastatin suspension and SLN. Stable lovastatin SLN having a mean size range of 60 to 119 nm and a zeta potential range of -16 to -21 mV were developed. More than 99% of the lovastatin was entrapped in the SLN. Lovastatin was dispersed in an amorphous state, and triglycerides were in beta(1) form in the SLN. In vitro stability studies showed the slow release and stability of lovastatin SLN. The relative bioavailabilities of lovastatin and lovastatin hydroxy acid of SLN were increased by ~173% and 324%, respectively, compared with the reference lovastatin suspension.

Stacking and quantitative analysis of lovastatin in urine samples by the transient moving chemical reaction boundary method in capillary electrophoresis

A simple, sensitive, and useful concentration method for lovastatin (Lvt) in urine has been developed based on the transient moving chemical reaction boundary method (tMCRBM) in capillary electrophoresis. The MCRB is formed with acidic sample buffer (Gly-HCl) and alkaline running buffer (Gly-NaOH). The following optimal conditions were determined for stacking and separation: electrophoretic buffer of 100 mM Gly- NaOH (pH 11.52), sample buffer of 20 mM Gly-HCl (pH 4.93), fused-silica capillary of 76 cm x 75-microm i.d (67 cm from detector), sample injection at 14 mbar for 3 min. A 21- to 26-fold increase in peak height was achieved for detection of Lvt in urine under the optimal conditions compared with normal capillary zone electrophoresis. By combining the sample pretreatment procedure with the stacking method, the sensitivity of Lvt in urine was increased by 105- to 130-fold. The limits of detection (LOD) and quantification (LOQ) for Lvt in urine were decreased to 8.8 ng/mL and 29.2 ng/mL, respectively. The intra-day and inter-day precision values (expressed as RSD) were 2.23-3.61% and 4.03-5.05%, respectively. The recoveries of the analyte at three concentration levels changed from 82.65 to 100.49%.

SLCO1B1 polymorphism markedly affects the pharmacokinetics of simvastatin acid

BACKGROUND AND OBJECTIVE

Organic anion transporting polypeptide 1B1 (OATP1B1) is an uptake transporter located at the sinusoidal membrane of human hepatocytes. This study aimed to investigate the effects of genetic polymorphism in the SLCO1B1 gene encoding OATP1B1 on the pharmacokinetics of simvastatin.

METHODS

Four healthy volunteers with the homozygous SLCO1B1 c.521CC genotype, 12 with the heterozygous c.521TC genotype and 16 with the homozygous c.521TT genotype (controls) were recruited. Each study participant ingested a single 40-mg dose of simvastatin. Plasma concentrations of simvastatin (inactive lactone) and its active metabolite simvastatin acid were measured for 12 h.

RESULTS

The AUC0-infinity of simvastatin acid was 120 and 221% higher in participants with the SLCO1B1 c.521CC genotype than in those with the c.521TC and c.521TT (reference) genotypes, respectively (P<0.001). The Cmax of simvastatin acid was 162 and 200% higher in participants with the c.521CC genotype than in those with the c.521TC and c.521TT genotypes (P<0.001). The Cmax of simvastatin acid occurred earlier in participants with the c.521CC and c.521TC genotypes than in those with the c.521TT genotype (P<0.05). No association existed between the SLCO1B1 genotype and the elimination half-life of simvastatin acid. Moreover, no statistically significant association was seen between the SLCO1B1 genotype and the pharmacokinetics of simvastatin lactone.

CONCLUSIONS

SLCO1B1 polymorphism markedly affects the pharmacokinetics of active simvastatin acid, but has no significant effect on parent simvastatin. Raised plasma concentrations of simvastatin acid in patients carrying the SLCO1B1 c.521C variant allele may enhance the risk of systemic adverse effects during simvastatin treatment. In addition, reduced uptake of simvastatin acid by OATP1B1 into the liver in patients with the c.521C allele could reduce its cholesterol-lowering efficacy.

Quantitative analysis of lovastatin in capsule of Chinese medicine Monascus by capillary zone electrophoresis with UV–vis detector

A capillary zone electrophoresis (CZE) method was developed for the quantitative analysis of lovastatin (Lvt) in capsule of monascus-Chinese medicine. Lvt in the capsule was separated using an electrolyte system consisting of 16% ethanol (v/v) in 60 mM Gly-sodium hydroxide buffer, pH 10.5, 16 kV applied voltage, 238 nm detection wavelength with a capillary of 51 cm x 75 microm i.d (43 cm to detector). Under the optimized conditions, the linear response of Lvt concentration ranges from 4.0 to 240 microg/mL with high correlation coefficient (r=0.9998, n=9), the limits of detection (LOD) and quantification (LOQ) for Lvt are 0.73 and 2.42 microg/mL, the precision values (expressed as R.S.D.) of intra-day and inter-day are 1.40-2.12% and 1.47-3.88%, respectively. The recoveries of the analyte at three concentration levels are 90.28-100.71%. The developed method can be well used for the quantification of Lvt in the drug in commercial formulations.

Analysis of five HMG-CoA reductase inhibitors-- atorvastatin, lovastatin, pravastatin, rosuvastatin and simvastatin: pharmacological, pharmacokinetic and analytical overview and development of a new method for use in pharmaceutical formulations analysis and in vitro metabolism studies

A specific, accurate, precise and reproducible high-performance liquid chromatographic (HPLC) method was developed and validated for the simultaneous quantitation of five 3-hydroxy-3-methyglutaryl coenzyme A (HMG-CoA) reductase inhibitors, viz. atorvastatin, lovastatin, pravastatin, rosuvastatin and simvastatin, in pharmaceutical formulations and extended the application to in vitro metabolism studies of these statins. Ternary gradient elution at a flow rate of 1 mL/min was employed on an Intertisl ODS 3V column (4.6 x 250 mm, 5 microm) at ambient temperature. The mobile phase consisted of 0.01 m ammonium acetate (pH 5.0), acetonitrile and methanol. Theophylline was used as an internal standard (IS). The HMG-CoA reductase inhibitors and their metabolites were monitored at a wavelength of 237 nm. Drugs were found to be 89.6-105.6% of their label's claim in the pharmaceutical formulations. For in vitro metabolism studies the reaction mixtures were extracted with simple liquid-liquid extraction using ethyl acetate. Baseline separation of statins and their metabolites along with IS free from endogenous interferences was achieved. Nominal retention times of IS, atorvastatin, lovastatin, pravastatin, rosuvastatin and simvastatin were 7.5, 17.2, 21.6, 28.5, 33.5 and 35.5 min, respectively. The proposed method is simple, selective and could be applicable for routine analysis of HMG-CoA reductase inhibitors in pharmaceutical preparations as well as in vitro metabolism studies.

Study on the conversion of three natural statins from lactone forms to their corresponding hydroxy acid forms and their determination in Pu-Erh tea

Conversions of statins, 3-hydroxy-3-methylglutaryl coenzyme A (HMG-CoA) reductase inhibitors, from lactone forms to their corresponding hydroxy acid form in 0.1 N NaOH or 0.05 N KOH (prepared with 25, 50, 75, 90% acetonitrile or methanol in water or 100% water) were evaluated. Results showed that lactone form statins could be transformed almost completely only in alkaline solutions prepared with 25 or 50% acetonitrile. In all methanolic alkaline solutions, lactone form statins could also be converted entirely, nevertheless, they would be further transformed to the methyl ester of the hydroxy acid form and the transformation increased as methanol rises. When lactone and hydroxy acid forms of statins were in methanol, ethyl acetate, 70% acetonitrile in water (with 0.5% acetic acid or no) for 0-48 h at room temperature or in 100 degrees C water for 0-2 h, lactone form statins were converted to their corresponding hydroxy acids, which were raised as time extends and the highest conversions of them were about 35% in 100 degrees C water and 70% acetonitrile, slightly transformed for lactone form statins in 70% acetonitrile (with 0.5% acetic acid) after 8 h, and the other treatments for all statins showed no significant changes. Interferences would be reduced efficiently when statins were extracted from Pu-Erh tea with methanol, ethyl acetate or 100 degrees C water followed by purifying through a C18 solid-phase extraction cartridge. Lovastatin was the only statin found in Pu-Erh tea and the highest content of it was found under ethyl acetate extraction. In ethyl acetate and methanol extracts, lovastatin existed merely as lactone form. The lowest content of lovastatin was found in the 100 degrees C water extract of Pu-Erh tea, however, both of lactone and hydroxy acid forms were found to exist in the extract.

Plasma Clearance of Lovastatin Versus Chinese Red Yeast Rice in Healthy Volunteers

OBJECTIVES

It is now accepted that inhibition of cholesterol biosynthesis is effective in the primary and secondary prevention of heart disease. However, the perceived side-effects on muscle and liver reduce the general acceptance of statin drug therapy as well as compliance over the long term, which is necessary for prevention efforts to be successful. Chinese red yeast rice (CRYR) is a supplement containing lovastatin (monacolin K), eight other monacolins, pigments, tannins, and other phytochemicals. The authors previously reported on a double- blind placebo-controlled trial of CRYR supplement in 80 individuals demonstrating a significant decrease in cholesterol levels from 250 mg/dL to 210 mg/dL over 8 weeks independent of diet. The current study compared the pharmacokinetics of CRYR with lovastatin at the same bioeffective dose for lowering cholesterol.

METHODS

Eleven (11) healthy volunteers were randomized to a crossover study taking 2400 mg CRYR or 20 mg of lovastatin.

RESULTS

The Cmax and area under the curve (AUC) of lovastatin were 22.42 ng/mL, and 80.47 higher than CRYR (p = 0.001 and 0.002, respectively). The Cmax for lovastatin hydroxy-acid was 36.63 ng/mL higher than the Cmax of CRYR hydroxy-acid (p = 0.001). The AUC of lovastatin hydroxy-acid was 258.5 greater than that of CRYR (p = 0.001).

CONCLUSIONS

The results suggested that the effect of CRYR on the cholesterol concentration might be caused by the additive and/or synergistic effects of monacolin K with other monacolins and substances in CRYR. It may lead to the ultimate development of a botanical supplement based on CRYR.

An API LC/MS/MS quantitation method for ansamitocin P-3 (AP3) and its preclinical pharmacokinetics

Ansamitocin P-3 (AP3) is a potent maytansinoid antitumor agent isolated from microorganisms and mosses. In this study, a highly sensitive and specific electrospray ionization (ESI) liquid chromatography-tandem mass spectrometry (LC/MS/MS) method for quantitation of AP3 was developed and validated. AP3 was extracted from rat plasma along with the internal standard, depsipeptide FK228 (NSC-630176, FR) with ethyl acetate. Components in the extract were separated on a 50mm x 2.1mm Betabasic C 85 microm stainless steel column by isocratic elution with 70% acetonitrile/0.9% formic acid. The liquid flow was passed through a pre-source splitter and 5% of the eluent was introduced into the API source. The components were analyzed in the multiple-reaction-monitoring (MRM) mode as the precursor/product ion pair of m/z 635.2/547.2 for AP3 and of m/z 541.5/424.0 for the internal standard FR. Linear calibration curves were obtained in the range 1-500 ng/mL using 0.2 mL rat plasma. The within-day coefficients of variation (CVs) were 12.9, 6.7, and 5.5% and the between-day CVs were 10.4, 6.5, and 6.4% (all n = 5) at 1, 10, and 200 ng/mL, respectively. A formulation based on normal saline and PEG300 was then developed and Sprague-Dawley male rats were given this formulated drug by i.v. bolus. Plasma drug concentrations were measured by this method and the pharmacokinetics were analyzed by standard techniques. Plasma concentration-time profiles were found to follow a triexponential decline and the terminal phase was nearly flat, suggesting that the drug distributed in deep tissue compartments or organs and then equilibrates slowly with the blood stream.

Development of an acetylene black?dihexadecyl hydrogen phosphate composite-modified glassy-carbon electrode, and its application in the determination of lovastatin in dosage drug forms

An electrochemical method has been established for the determination of lovastatin (LV). It is based on the enhanced oxidation of lovastatin at a novel acetylene black-dihexadecyl hydrogen phosphate composite-modified glassy-carbon electrode (AB-DHP/GCE) in the presence of Triton X-100. This electrode was prepared by dispersion of acetylene black particles in an aqueous suspension of DHP and the formation of a stable film of the resulting AB-DHP composite on the surface of a glassy carbon electrode (GCE). As a result of modification of the AB-DHP composite, the electrochemical response of lovastatin at GCE was apparently enhanced; this was apparent as amplification of the oxidation current and the negative shift of the oxidation potential. The oxidation current can be further increased in the presence of a trace amount of Triton X-100. The enhanced oxidation of lovastatin at AB-DHP/GCE was due to enlargement of the effective electrode area, catalysis of lovastatin oxidation by AB, and accumulation of lovastatin at the hydrophobic surface of the DHP layer, which would be enhanced by the coherence with Triton X-100. The effects of some working conditions on the oxidation current of lovastatin were tested and the calibration plot was examined. The result showed that the oxidation current was a linear function of lovastatin concentration in the range 2.5 x 10(-8) - 1.0 x 10(-6) mol L(-1) and a low detection limit of 4.0 x 10(-9) mol L(-1) was obtained under optimum conditions. This electrode system was applied to the determination of lovastatin in dosage drug forms and the results were in accordance with the ultraviolet-visible spectroscopy method.

Quantitative analysis of simvastatin and its β-hydroxy acid in human plasma using automated liquid–liquid extraction based on 96-well plate format and liquid chromatography-tandem mass spectrometry

An assay based on automated liquid-liquid extraction (LLE) and liquid chromatography-tandem mass spectrometry (LC/MS/MS) has been developed and validated for the quantitative analysis of simvastatin (SV) and its beta-hydroxy acid (SVA) in human plasma. A Packard MultiProbe II workstation was used to convert human plasma samples collected following administration of simvastatin and quality control (QC) samples from individual tubes into 96-well plate format. The workstation was also used to prepare calibration standards and spike internal standards. A Tomtec Quadra 96-channel liquid handling workstation was used to perform LLE based on 96-well plates including adding solvents, separating organic from aqueous layer and reconstitution. SV and SVA were separated through a Kromasil C18 column (50 mm x 2 mm i.d., 5 microm) and detected by tandem mass spectrometry with a TurboIonspray interface. Stable isotope-labeled SV and SVA, 13CD(3)-SV and 13 CD(3)-SVA, were used as the internal standards for SV and SVA, respectively. The automated procedures reduced the overall analytical time (96 samples) to 1/3 of that of manual LLE. Most importantly, an analyst spent only a fraction of time on the 96-well LLE. A limit of quantitation of 50 pg/ml was achieved for both SV and SVA. The interconversion between SV and SVA during the 96-well LLE was found to be negligible. The assay showed very good reproducibility, with intra- and inter-assay precision (%R.S.D.) of less than 7.5%, and accuracy of 98.7-102.3% of nominal values for both analytes. By using this method, sample throughput should be enhanced at least three-fold compared to that of the manual procedure.

Analytical methods for the quantitative determination of 3-hydroxy-3-methylglutaryl coenzyme A reductase inhibitors in biological samples

Published analytical methods for the quantitative determinations of presently available five 3-hydroxy-3-methylglutaryl coenzyme A reductase inhibitors ("statins"), lovastatin, simvastatin, pravastatin, fluvastatin and atorvastatin, are reviewed for therapeutic drug monitoring purpose in patients. Almost all assay reviewed are based on high-performance liquid chromatography or gas chromatography. Some purification steps (liquid-liquid extraction, solid-phase extraction, etc.) have been used before they are submitted to separation by chromatographic procedures and they are detected by various detection methods like UV, fluorescence and mass spectrometry. This review shows that most method may be used quantitative determination of statins in plasma and they are suitable for therapeutic drug monitoring purpose of these drugs.

Determination of cholesterol-lowering statin drugs in aqueous samples using liquid chromatography-electrospray ionization tandem mass spectrometry

Cholesterol-lowering statin drugs are among the most frequently prescribed agents for reducing morbidity and mortality related to coronary heart disease. Four major statin drugs, atorvastatin, lovastatin, pravastatin and simvastatin, were determined using liquid chromatography-electrospray ionization tandem mass spectrometry with methylammonium acetate as an additive in the mobile phase. Protonated atorvastatin, and methylammonium-adducted lovastatin, pravastatin and simvastatin were selected as precursor ions, and product ions were detected by selected reaction monitoring in positive-ion mode. The instrumental detection limits of atorvastatin, lovastatin, pravastatin and simvastatin are 0.7, 0.7, 8.2 and 0.9 pg, respectively. A solid-phase extraction method was developed to enrich the analytes from aqueous samples. All of the statins were detected in an untreated sewage sample at 4-117 ng/l and in a treated sewage sample at 1-59 ng/1; but only atorvastatin was detected in a surface water sample at 1 ng/l.

Does simvastatin stimulate bone formation in vivo?

BACKGROUND

Statins, potent compounds that inhibit cholesterol synthesis in the liver have been reported to induce bone formation, both in tissue culture and in rats and mice. To re-examine potential anabolic effects of statins on bone formation, we compared the activity of simvastatin (SVS) to the known anabolic effects of PTH in an established model of ovariectomized (OVX) Swiss-Webster mice.

METHODS

Mice were ovariectomized at 12 weeks of age (T0), remained untreated for 5 weeks to allow development of osteopenia (T5), followed by treatment for 8 weeks (T13). Whole, trabecular and cortical femoral bone was analyzed by micro-computed tomography (micro CT). Liquid chromatography/mass spectrometry (LC/MS) was used to detect the presence of SVS and its active metabolite, simvastatin beta-hydroxy acid (SVS-OH) in the mouse serum.

RESULTS

Trabecular BV/TV at T13 was 4.2 fold higher in animals treated with PTH (80 micro-g/kg/day) compared to the OVX-vehicle treated group (p < 0.001). However, the same comparison for the SVS-treated group (10 mg/kg/day administered by gavage) showed no significant difference (p = NS). LC/MS detected SVS and SVS-OH in mouse serum 20 minutes after gavage of 100 mg SVS. A serum osteocalcin assay (OC) demonstrated that neither bone formation nor osteoblast activity is significantly enhanced by SVS treatment in this in vivo study.

CONCLUSIONS

While PTH demonstrated the expected anabolic effect on bone, SVS failed to stimulate bone formation, despite our verification by LC/MS of the active SVS-OH metabolite in mouse serum. While statins have clear effects on bone formation in vitro, the formulation of existing 'liver-targeted' statins requires further refinement for efficacy in vivo.

Rapid pharmacokinetic screening for the selection of new drug discovery candidates using a generic isocratic liquid chromatography--atmospheric pressure ionization tandem mass spectrometry method

A generic isocratic HPLC-APCI-MS-MS method has been developed for the determination of plasma concentrations of bioactive compounds for the selection of potential new drug discovery candidates. A 4.6 x 50 mm cyano phase column eluted with an acetonitrile/water mobile phase containing 20 mM ammonium acetate and 0.4% TFA produces retention times of 1 min or less for a wide range of compounds. This is a great advantage in new drug discovery where many compounds are analyzed once and eliminated. No time is consumed developing chromatographic conditions for each new compound. The mass spectrometer can be optimized and the samples can be processed and analyzed, all in the same day. Multiple assays can be run consecutively without changing the column or mobile phase between assays.

Effects of liquid chromatography mobile phase buffer contents on the ionization and fragmentation of analytes in liquid chromatographic/ionspray tandem mass spectrometric determination

The effects of liquid chromatography mobile phase buffer contents on the ionization and fragmentation of drug molecules in liquid chromatographic/ionspray tandem mass spectrometric (LC/MS/MS) determination were evaluated for simvastatin (SV) and its hydroxy acid (SVA). The objective was to improve further the sensitivity for SV by overcoming the unfavorable condition caused by the formation of multiple major adduct ions and multiple major fragment ions when using ammonium as LC mobile phase buffer. Mobile phases (70:30 acetonitrile-buffer, 2 mM, pH 4.5) with buffers made from ammonium, hydrazine or alkyl (methyl, ethyl, dimethyl or trimethyl)-substituted ammonium acetate were evaluated. Q1 scan and product ion scan spectra were obtained for SV in each of the mobile phases under optimized conditions. The results showed that, with the alkylammonium buffers, the alkylammonium-adducted SV was observed as the only major molecular ion, while the formation of other adduct ions ([M + H](+), [M + Na](+) and [M + K](+)) was successfully suppressed. On the other hand, product ion spectra with a single major fragment ion were not observed for any of the alkylammonium-adducted SVs. The affinity of the alkylammoniums to SV and the basicity of the alkylamines are believed to be factors influencing the formation and abundance of molecular and fragment ions, respectively. Methylammonium acetate provided the most favorable condition among all the buffers evaluated and improved the sensitivity several-fold for SV in LC/MS/MS quantitation compared with that obtained using ammonium acetate buffer. Better precision for SV in both Q1 and SRM scans was observed when using methylammonium buffer compared with those using ammonium buffer. The mobile phase buffer contents did not seem to affect the ionization, fragmentation and chromatography of SVA. The results of this evaluation can be applied to similar situations with other organic molecules in ionspray LC/MS/MS determination.

Fragmentation study of simvastatin and lovastatin using electrospray ionization tandem mass spectrometry

The fragmentation mechanism of simvastatin and lovastatin was investigated using both triple quadrupole and ion trap mass spectrometers. The elimination of the ester side-chain followed by dehydration and dissociation of the lactone moiety were observed as the main fragmentation pathways for both compounds. Another major fragmentation process was a C==C double-bond facilitated rearrangement. Our tandem mass spectrometric (MS/MS) data suggested that the beta-hydroxy group was involved in the fragmentation by interacting with the carboxyl group generated from the ring opening of the lactone. As a result, a facile neutral loss of 60 Da (CH(3)COOH or a combination of CH(2)==C==O and H(2)O) was detected. MS/MS studies of the structural analogs also provided evidence that the dehydration of the beta-hydroxy lactone generated preferentially the beta,gamma-unsaturated lactones.

Quantitation of simvastatin and its beta-hydroxy acid in human plasma by liquid-liquid cartridge extraction and liquid chromatography/tandem mass spectrometry

A sensitive and reliable procedure for the simultaneous determination of simvastatin (SV) and its active beta-hydroxy acid metabolite (SVA) in human plasma was developed and validated. The analytes were extracted simultaneously from 0.5 ml aliquots of human plasma samples by methyl tert-butyl ether (MTBE) via Chem Elut cartridge extraction [also called liquid-solid extraction (LSE) or liquid-liquid cartridge extraction (LLCE)], separated through a Kromasil C(18) column (50 x 2 mm i.d. 5 microm) and detected by tandem mass spectrometry with a turbo ionspray interface. Stable isotope-labeled SV and SVA, (13)CD(3)-SV and (13)CD(3)-SVA, were used as internal standards. SV and SVA were detected in positive and negative ion modes, respectively, via within-run polarity switching. The use of Chem Elut cartridges not only provided a simple and efficient means of plasma sample extraction but also successfully reduced the interconversion between SV and SVA to an undetectable (for lactonization of SVA) or negligible (<0.07%, for hydrolysis of SV) level. The method showed excellent reproducibility, with intra- and inter-assay precisions <4.5% (RSD), and intra- and inter-assay accuracy between 94% and 107% of nominal values, for both analytes. The extraction recoveries were 78% and 87% on average for SV and SVA, respectively. The analyte was found to be stable in plasma through three freeze (-70 degrees C)-thaw (4 degrees C) cycles and for at least 3 h under bench-top storage condition in an ice-bath (4 degrees C), and also in the reconstitution solution at 4 degrees C for at least 24 h. The method has a lower limit of quantitation (LOQ) of 50 pg ml(-1) with a linear calibration range of 0.05-50 ng ml(-1) for both analytes, and has proved to be very reliable for the analysis of clinical samples.

Bioanalytical method validation design for the simultaneous quantitation of analytes that may undergo interconversion during analysis

In the analysis of post-dose biological samples for quantitative determination of two analytes that can potentially undergo interconversion, it is essential to minimize the interconversion during the multiple steps of the bioanalytical method. However, even after optimizing the conditions of each step, some interconversion may be unavoidable. Even then, a method can be developed for the accurate simultaneous determination of the two analytes in post-dose biological samples if the composition, in terms of the ratio of the concentrations of the two analytes, of the calibration standards and quality control (QC) samples are selected judiciously, in relation to the composition of the unknown samples to be analyzed. As an example of such interconverting analytes, a delta-hydroxy acid compound (analyte 1) and its delta-lactone (analyte 2) were selected as model compounds that can potentially undergo interconversion. The effects of changing the relative concentrations of the two analytes in QC samples vis-à-vis the calibration standards on the performance of the method under conditions were investigated where: (a) the interconversion between the two analytes was minimized; (b) the conversion of analyte 2 to analyte 1 was enhanced; (c) the interconversion between the two analytes was enhanced. The results showed that the method performance, as measured by the accuracy and precision of the QC samples, was not acceptable when the ratio of concentration of analyte 1 to that of analyte 2 in the QC samples was different from that in the calibration standards and the conditions used facilitated the conversion of one analyte to the other. However, when the relative concentration of the two analytes in the QC samples was identical to that of the calibration standards, the method performance was acceptable under all three conditions of interconversion. This was because the same degree of interconversion took place in the QC samples and calibration standards. The purpose of QC samples in bioanalytical methods is to gauge how the method will perform for the analysis of post-dose test samples and hence, ideally, the relative concentrations of the analytes in QC samples, should be selected to mimic the anticipated concentrations in the test samples. However, the relative concentrations of the analytes in test samples may not be known a-priori, or may change from sample to sample; therefore, it is not always possible to construct QC samples that exactly mimic the relative concentrations of analytes in the test samples. Thus, in order to cover the variety of test samples, the method should include, in addition to QC samples that contain the analytes at the same relative concentration as in the calibration standards, QC samples with relative concentrations that are different from those in the calibration standards, including those that contain only analyte 1 and only analyte 2. In addition, the conditions adopted for the method should favor the minimization of the conversion of the analyte that is expected to be the major component in the post-dose test samples.

Atmospheric pressure ionization time-of-flight mass spectrometry coupled with fast liquid chromatography for quantitation and accurate mass measurement of five pharmaceutical drugs in human plasma

The quantitative determination and accurate mass measurement of five tricyclic amine pharmaceutical drugs (doxepin, desipramine, imipramine, amitriptyline and trimipramine) fortified in human plasma within a per sample run time of 18 s was accomplished by atmospheric pressure ionization (API) time-of-flight (TOF) mass spectrometry using a turboIonspray liquid chromatography/mass spectrometry (LC/MS) interface coupled with high-performance liquid chromatography (HPLC). The relatively short HPLC separation (18 s) was achieved using a short C18 column (15 x 2.1 mm i.d.) with a high aqueous mobile phase maintained at a flow-rate of 1.4 ml min(-1). An acquisition speed of 0.2 s per spectrum accommodates these fast separation conditions. This method employs a one-step liquid-liquid extraction procedure to isolate the five tricyclic amines from biological matrix components The overall extraction recovery was 75% for desipramine and >90% for the other four tricyclic amines. The lower level of quantitation was 1-2 ng ml(-1) for each compound. The calibration curve was linear from 2 to 100 ng ml(-1) for desipramine and from 1 to 50 ng ml(-1) for the other four tricyclic amines. A deuterated internal standard, imipramine-d3, was used for all five tricyclic amines. Acceptable intra- and inter-assay precision (1.0-17.7%) and accuracy (0.2-14.5%) were obtained. The linear dynamic range was extended to 200 based on a software upgrade for correcting ion current detection saturation. The accurate masses of the five tricyclic amines were determined by on-line LC/TOFMS analyses of biological extracts using two-point internal mass calibration. This was done by infusing a reference standard, Jeffamine D230, post-column into the HPLC effluent. All results showed a mass error not greater than 9 ppm for all the target compounds. These results were obtained from both synthetic mixtures when as little as 100 pg were injected or extracts of spiked human plasma samples with analytical concentration as low as 5 ng ml(-1). The factors influencing accurate mass measurements are discussed.

A subnanogram API LC/MS/MS quantitation method for depsipeptide FR901228 and its preclinical pharmacokinetics

A highly sensitive and specific atmospheric pressure ionization (API) liquid chromatographic-tandem mass spectrometric (LC/MS/MS) method for the quantitation of depsipeptide FR901228 (NSC-630176, FR), a naturally occurring antitumor agent, was developed and validated. FR was extracted from human or rat plasma along with the internal standard, t-Boc-Met-Leu-Phe (BMLP) with ethyl acetate. Components in the extract were separated on a 5-microm C8 Spherisorb 50 x 4.6 mm i.d. column by isocratic elution with methanol/acetonitrile/12 mM ammonium acetate (60:10:30, v/v/v). The liquid flow was passed through a presource splitter and 5% of the eluate was introduced into the API source. The components were analyzed in the multiple-reaction monitoring (MRM) mode to enhance specificity. Linear calibration curves were obtained in the range of 0.1-100.0 ng/ml with 0.5 ml human plasma and 0.5-100.0 ng/ml with 0.1 ml rat plasma. The limit of quantitation (LOQ) was 0.1 ng/ml using 0.5 ml human plasma and 0.5 ng/ml using 0.1 ml rat plasma. The overall within-day precision was below 12% in human plasma and below 7% in rat plasma; and the between-day precision was below 10.2% in human plasma and 7.2% in rat plasma. The accuracy at low, medium and high levels ranged from 99.3 to 111.7% in human plasma and 96.2-107.3% in rat plasma. The high sensitivity permitted pharmacokinetic study of FR in the rat at a single i.v. dose as low as 1 mg/kg. At this dose, plasma FR levels declined biexponentially with a mean terminal t(1/2) of 187.7 min (n = 6) and were detectable up to 24 h. After an oral dose at 5 mg/kg, plasma FR levels were highly erratic and yielded a mean bioavailability of 1.6% (n = 6). At a higher oral dose of 50 mg/kg, a mean bioavailability of 10.6% was obtained, both being estimated by a non-crossover method.

Ultrasensitive determination of NE-100, a novel sigma ligand, in human plasma by liquid chromatography and electrospray ionization tandem mass spectrometry combined with a column-switching technique

For the highly sensitive and selective determination of NE-100, a novel sigma ligand, at levels of low picogram per milliliter of human plasma, a method with excellent reliability employing liquid chromatography (LC)-electrospray ionization (ESI) tandem mass spectrometry (MS-MS) combined with a column-switching technique has been developed. The method involves the use of a stable isotope labeled compound as the internal standard (I.S.), liquid-solid extraction of a plasma specimen with a C8 cartridge, automated on-line clean-up on a short trapping column, subsequent separation on a micro-bore C18 column and detection with ESI-MS-MS using m/z 356 ([M+H]+) as a precursor ion and m/z 105 as a product ion in a selected reaction monitoring mode. The detection and the quantification limits of NE-100 in plasma were 0.5 pg/ml with a signal-to-noise ratio (S/N) of 3 and 2.3 pg/ml, respectively, with an S/N of 21. The good linearity of the calibration graph was obtained in the range of 2.3 to approximately 907.0 pg/ml with excellent reliability. The developed method was applied to the determination of NE-100 in plasma obtained from the clinical trail.

Development and validation of a high-performance liquid chromatography tandem mass spectrometry assay for atorvastatin, ortho-hydroxy atorvastatin, and para-hydroxy atorvastatin in human, dog, and rat plasma

A liquid chromatographic/mass spectrometric method to quantitate atorvastatin (AT) and its active metabolites ortho-hydroxy (o-AT) and para-hydroxy (p-AT) atorvastatin in human, dog, and rat plasma was validated. The method consisted of washing plasma samples at high pH with diethyl ether and subsequently extracting the analytes and two internal standards, [d5]-atorvastatin ([d5]-AT) and [d5]-ortho-hydroxy atorvastatin ([d5]-o-AT), from acidified plasma by using diethyl ether. The ether layer was evaporated to dryness and the residue reconstituted in ammonium acetate (20 mM, pH 4.0)-acetonitrile-isopropanol (60:40:1, v/v/v). Chromatographic separation of analytes was achieved by using a YMC J'Sphere H80 (C-18) 150 x 2 mm, 4 microns particle size, column with a mobile phase consisting of acetonitrile-0.1% acetic acid, (70:30, v/v). Analytes were detected by using MS/MS. Sample introduction and ionization was by electrospray ionization in the positive ion mode. The method proved suitable for routine quantitation of AT, o-AT, and p-AT over the concentration range of 0.250 to 25.0 ng/mL. Approximate retention time ranges of p-AT, o-AT, [d5]-o-AT, AT, and [d5]-AT were 2.27 +/- 0.21, 3.36 +/- 0.23, 3.54 +/- 0.46, 4.12 +/- 0.61, and 4.65 +/- 0.65 min, respectively. No peaks interfering with quantitation were observed throughout the validation processes. Mean recoveries of AT, o-AT, and p-AT from plasma ranged 100%-107%, 70.6%-104%, and 47.6%-85.6%, respectively. Mean recoveries of the [d5]-AT and [d5]-o-AT internal standards ranged 98.0%-99.9% and 97.3%, respectively. Interassay precision, based on the percent relative deviation for replicate quality controls for AT, o-AT, and p-AT, was < or = 7.19%, 8.28%, and 12.7%, respectively. Interassay accuracy for AT, o-AT, and p-AT was +/- 10.6%, 5.86%, and 15.8%, respectively. AT, o-AT, and p-AT in human, dog, and rat plasma quality controls were stable to three freeze-thaw cycles. AT, o-AT, and p-AT were stable frozen for 127, 30 and 270 days in human, dog, and rat plasma quality control samples, respectively. Human plasma quality control samples containing AT, o-AT, and p-AT were stable for at least 4 days at ambient room temperature and 37 degrees C. The lower limit of quantitation for all analytes was 0.250 ng/mL for a 1.0-mL sample aliquot.