Identification of Kazal Inhibitor Scaffolds with Identical Canonical Binding Loops and Their Effects on Binding Properties

Kazal inhibitors hold high potential as scaffolds for therapeutic molecules, taking advantage of the easily exchangeable canonical binding loop. Different Kazal inhibitor backbones have been suggested to be therapeutically useful, but the impact of different Kazal-like scaffolds on binding properties is still largely unknown. Here, we identified trypsin-targeting human serine protease inhibitor Kazal type 1 (SPINK1) homologues in different mammalian species that cluster in two P2-P1 combinations, implying the coevolution of these residues. We generated loop exchange variants of human SPINK1 for comparison with Kazal inhibitors from related species. Using comprehensive biophysical characterization of the inhibitor-enzyme interactions, we found not only affinity but also pH resistance to be highly backbone-dependent. Differences are mostly observed in complex stability, which varies by over one order of magnitude. We provide clear evidence for high backbone dependency within the Kazal family. Hence, when designing Kazal inhibitor-based therapeutic molecules, testing different backbones after optimizing the canonical binding loop can be beneficial and may result in increased affinity, complex stability, specificity, and pH resistance.

Bowman-Birk Inhibitors: Insights into Family of Multifunctional Proteins and Peptides with Potential Therapeutical Applications

Bowman-Birk inhibitors (BBIs) are found primarily in seeds of legumes and in cereal grains. These canonical inhibitors share a highly conserved nine-amino acids binding loop motif CTP1SXPPXC (where P1 is the inhibitory active site, while X stands for various amino acids). They are natural controllers of plants' endogenous proteases, but they are also inhibitors of exogenous proteases present in microbials and insects. They are considered as plants' protective agents, as their elevated levels are observed during injury, presence of pathogens, or abiotic stress, i.a. Similar properties are observed for peptides isolated from amphibians' skin containing 11-amino acids disulfide-bridged loop CWTP1SXPPXPC. They are classified as Bowman-Birk like trypsin inhibitors (BBLTIs). These inhibitors are resistant to proteolysis and not toxic, and they are reported to be beneficial in the treatment of various pathological states. In this review, we summarize up-to-date research results regarding BBIs' and BBLTIs' inhibitory activity, immunomodulatory and anti-inflammatory activity, antimicrobial and insecticidal strength, as well as chemopreventive properties.

New Infestin-4 Mutants with Increased Selectivity against Factor XIIa

Factor XIIa (fXIIa) is a serine protease that triggers the coagulation contact pathway and plays a role in thrombosis. Because it interferes with coagulation testing, the need to inhibit fXIIa exists in many cases. Infestin-4 (Inf4) is a Kazal-type inhibitor of fXIIa. Its specificity for fXIIa can be enhanced by point mutations in the protease-binding loop. We attempted to adapt Inf4 for the selective repression of the contact pathway under various in vitro conditions, e.g., during blood collection and in ‘global’ assays of tissue factor (TF)-dependent coagulation. First, we designed a set of new Inf4 mutants that, in contrast to wt-Inf4, had stabilized canonical conformations during molecular dynamics simulation. Off-target activities against factor Xa (fXa), plasmin, and other coagulation proteases were either reduced or eliminated in these recombinant mutants, as demonstrated by chromogenic assays. Interactions with fXIIa and fXa were also analyzed using protein-protein docking. Next, Mutant B, one of the most potent mutants (its K_i for fXIIa is 0.7 nM) was tested in plasma. At concentrations 5–20 μM, this mutant delayed the contact-activated generation of thrombin, as well as clotting in thromboelastography and thrombodynamics assays. In these assays, Mutant B did not affect coagulation initiated by TF, thus demonstrating sufficient selectivity and its potential practical significance as a reagent for coagulation diagnostics.

Three-dimensional Structure of a Kunitz-type Inhibitor in Complex with an Elastase-like Enzyme

Elastase-like enzymes are involved in important diseases such as acute pancreatitis, chronic inflammatory lung diseases, and cancer. Structural insights into their interaction with specific inhibitors will contribute to the development of novel anti-elastase compounds that resist rapid oxidation and proteolysis. Proteinaceous Kunitz-type inhibitors homologous to the bovine pancreatic trypsin inhibitor (BPTI) provide a suitable scaffold, but the structural aspects of their interaction with elastase-like enzymes have not been elucidated. Here, we increased the selectivity of ShPI-1, a versatile serine protease inhibitor from the sea anemone Stichodactyla helianthus with high biomedical and biotechnological potential, toward elastase-like enzymes by substitution of the P1 residue (Lys(13)) with leucine. The variant (rShPI-1/K13L) exhibits a novel anti-porcine pancreatic elastase (PPE) activity together with a significantly improved inhibition of human neuthrophil elastase and chymotrypsin. The crystal structure of the PPE·rShPI-1/K13L complex determined at 2.0 Å resolution provided the first details of the canonical interaction between a BPTI-Kunitz-type domain and elastase-like enzymes. In addition to the essential impact of the variant P1 residue for complex stability, the interface is improved by increased contributions of the primary and secondary binding loop as compared with similar trypsin and chymotrypsin complexes. A comparison of the interaction network with elastase complexes of canonical inhibitors from the chelonian in family supports a key role of the P3 site in ShPI-1 in directing its selectivity against pancreatic and neutrophil elastases. Our results provide the structural basis for site-specific mutagenesis to further improve the binding affinity and/or direct the selectivity of BPTI-Kunitz-type inhibitors toward elastase-like enzymes.

Isolation and characterization of a protease inhibitor from Acacia karroo with a common combining loop and overlapping binding sites for chymotrypsin and trypsin

By using affinity and reversed-phase HPLC (RP-HPLC) chromatographies two chymotrypsin-trypsin inhibitors were isolated from seeds of Acacia karroo, a legume of the subfamily Mimosoideae. The primary structure of one of these inhibitors, named AkCI/1, was determined. The inhibitor consists of two polypeptide chains, 139 and 44 residues respectively, which are linked by a single disulfide bridge. The amino acid sequence of AkCI/1 is homologous to and showed more than 60% sequence similarity with other protease inhibitors isolated earlier from the group of Mimosoideae. AkCI/1 inhibits both chymotrypsin (EC 3.4.21.1) and trypsin (EC 3.4.21.4) in a 1:1M ratio with Ki values of 2.8 × 10(-12)M and 1.87 × 10(-12)M, respectively. The P1-P1' residues for trypsin were identified as Arg68-Ile69 by selective hydrolysis of the inhibitor at this site, with bovine trypsin and human trypsin IV. The cleavage did not affect the inhibition of trypsin, but fully abolished the chymotrypsin inhibitory activity of AkCI/1. This finding together with our studies on competition of the two enzymes for the same combining loop suggests that the same loop has to contain the binding sites for both proteases. The most likely P1 residue of AkCI/1 for chymotrypsin is Tyr67.

Fungal β-trefoil trypsin inhibitors cnispin and cospin demonstrate the plasticity of the β-trefoil fold

The recently identified fungal protease inhibitors cnispin, from Clitocybe nebularis, and cospin, from Coprinopsis cinerea, are both β-trefoil proteins highly specific for trypsin. The reactive site residue of cospin, Arg27, is located on the β2-β3 loop. We show here, that the reactive site residue in cnispin is Lys127, located on the β11-β12 loop. Cnispin is a substrate-like inhibitor and the β11-β12 loop is yet another β-trefoil fold loop recruited for serine protease inhibition. By site-directed mutagenesis of the P1 residues in the β2-β3 and β11-β12 loops in cospin and cnispin, protease inhibitors with different specificities for trypsin and chymotrypsin inhibition have been engineered. Double headed inhibitors of trypsin or trypsin and chymotrypsin were prepared by introducing a second specific site residue into the β2-β3 loop in cnispin and into the β11-β12 loop in cospin. These results show that β-trefoil protease inhibitors from mushrooms exhibit broad plasticity of loop utilization in protease inhibition.

The trypsin inhibitor panulirin regulates the prophenoloxidase-activating system in the spiny lobster Panulirus argus

The melanization reaction promoted by the prophenoloxidase-activating system is an essential defense response in invertebrates subjected to regulatory mechanisms that are still not fully understood. We report here the finding and characterization of a novel trypsin inhibitor, named panulirin, isolated from the hemocytes of the spiny lobster Panulirus argus with regulatory functions on the melanization cascade. Panulirin is a cationic peptide (pI 9.5) composed of 48 amino acid residues (5.3 kDa), with six cysteine residues forming disulfide bridges. Its primary sequence was determined by combining Edman degradation/N-terminal sequencing and electrospray ionization-MS/MS spectrometry. The low amino acid sequence similarity with known proteins indicates that it represents a new family of peptidase inhibitors. Panulirin is a competitive and reversible tight-binding inhibitor of trypsin (Ki = 8.6 nm) with a notable specificity because it does not inhibit serine peptidases such as subtilisin, elastase, chymotrypsin, thrombin, and plasmin. The removal of panulirin from the lobster hemocyte lysate leads to an increase in phenoloxidase response to LPS. Likewise, the addition of increasing concentrations of panulirin to a lobster hemocyte lysate, previously depleted of trypsin-inhibitory activity, decreased the phenoloxidase response to LPS in a concentration-dependent fashion. These results indicate that panulirin is implicated in the regulation of the melanization cascade in P. argus by inhibiting peptidase(s) in the pathway toward the activation of the prophenoloxidase enzyme.

Trypsin and chymotrypsin inhibitor peptides from the venom of Chinese Daboia russellii siamensis

Two trypsin inhibitors and one chymotrypsin inhibitor from Chinese Daboia russellii siamensis venom, denoted as CBPTI-1, CBPTI-2 and CBPTI-3 were purified, characterized and cloned from lyophilized venom-derived cDNA libraries. The N-terminus of CBPTI-1 was modified and not amenable to Edman degradation sequencing, however an internal partial sequence was found to be SGRCRGHLRRIYYNPDSNKCE. The N-termini of CBPTI-2 and CBPTI-3 were unmodified and their partial sequences were established as HDRPTFCNLAPESGRCRAH and HDRPKFCYLPADPGECMAYIRSFYYDS respectively. From cloning studies CBPTI-1 was found to consist of 66 amino acid residues, while CBPTI-2 and CBPTI-3 precursors consist of 60 amino acid residues, including 6 cysteine residues. Another cDNA sequence (CBPTI-4) was also obtained. Alignment of cDNA sequences showed that CBPTI-3 exhibited similar sequence homology to CBPTI-4 cDNA except for an 8 nucleotide deletion in the open-reading frame. CBPTI-1 and CBPTI-2 were demonstrated to be potent trypsin inhibitors, but were also shown to be effectively potent in chymotrypsin inhibition. The K(i) values of CBPTI-1 and CBPTI-2 for trypsin inhibition were 4.07 × 10(-7) M and 6.66 × 10(-7) M, respectively, and they were non-competitive in their activity. CBPTI-3 showed chymotrypsin inhibition activity with a K(i) value of 2.55 × 10(-9) M, but did not show trypsin inhibitor activity.

Determinants of affinity and proteolytic stability in interactions of Kunitz family protease inhibitors with mesotrypsin

An important functional property of protein protease inhibitors is their stability to proteolysis. Mesotrypsin is a human trypsin that has been implicated in the proteolytic inactivation of several protein protease inhibitors. We have found that bovine pancreatic trypsin inhibitor (BPTI), a Kunitz protease inhibitor, inhibits mesotrypsin very weakly and is slowly proteolyzed, whereas, despite close sequence and structural homology, the Kunitz protease inhibitor domain of the amyloid precursor protein (APPI) binds to mesotrypsin 100 times more tightly and is cleaved 300 times more rapidly. To define features responsible for these differences, we have assessed the binding and cleavage by mesotrypsin of APPI and BPTI reciprocally mutated at two nonidentical residues that make direct contact with the enzyme. We find that Arg at P(1) (versus Lys) favors both tighter binding and more rapid cleavage, whereas Met (versus Arg) at P'(2) favors tighter binding but has minimal effect on cleavage. Surprisingly, we find that the APPI scaffold greatly enhances proteolytic cleavage rates, independently of the binding loop. We draw thermodynamic additivity cycles analyzing the interdependence of P(1) and P'(2) substitutions and scaffold differences, finding multiple instances in which the contributions of these features are nonadditive. We also report the crystal structure of the mesotrypsin·APPI complex, in which we find that the binding loop of APPI displays evidence of increased mobility compared with BPTI. Our data suggest that the enhanced vulnerability of APPI to mesotrypsin cleavage may derive from sequence differences in the scaffold that propagate increased flexibility and mobility to the binding loop.

The amyloid precursor protein/protease nexin 2 Kunitz inhibitor domain is a highly specific substrate of mesotrypsin

The amyloid precursor protein (APP) is a ubiquitously expressed transmembrane adhesion protein and the progenitor of amyloid-beta peptides. The major splice isoforms of APP expressed by most tissues contain a Kunitz protease inhibitor domain; secreted APP containing this domain is also known as protease nexin 2 and potently inhibits serine proteases, including trypsin and coagulation factors. The atypical human trypsin isoform mesotrypsin is resistant to inhibition by most protein protease inhibitors and cleaves some inhibitors at a substantially accelerated rate. Here, in a proteomic screen to identify potential physiological substrates of mesotrypsin, we find that APP/protease nexin 2 is selectively cleaved by mesotrypsin within the Kunitz protease inhibitor domain. In studies employing the recombinant Kunitz domain of APP (APPI), we show that mesotrypsin cleaves selectively at the Arg(15)-Ala(16) reactive site bond, with kinetic constants approaching those of other proteases toward highly specific protein substrates. Finally, we show that cleavage of APPI compromises its inhibition of other serine proteases, including cationic trypsin and factor XIa, by 2 orders of magnitude. Because APP/protease nexin 2 and mesotrypsin are coexpressed in a number of tissues, we suggest that processing by mesotrypsin may ablate the protease inhibitory function of APP/protease nexin 2 in vivo and may also modulate other activities of APP/protease nexin 2 that involve the Kunitz domain.

Crystal structure of textilinin-1, a Kunitz-type serine protease inhibitor from the venom of the Australian common brown snake (Pseudonaja textilis)

Textilinin-1 is a Kunitz-type serine protease inhibitor isolated from the venom of the Australian common brown snake, Pseudonaja textilis. This molecule binds to and blocks the activity of a range of serine proteases, including plasmin and trypsin. Textilinin-1's ability to inhibit plasmin, a protease involved in fibrinolysis, has raised the possibility that it could be used as an alternative to aprotinin (Trasylol) as a systemic antibleeding agent in surgery. Here, the crystal structure of free recombinant textilinin-1 has been determined to 1.63 A, with three molecules observed in the asymmetric unit. All of these have a similar overall fold to aprotinin, except that the canonical loop for one of the molecules is inverted such that the side chain of the P1' residue, Val18, is partially buried by intramolecular contacts to Pro15, Thr13, and Ile36. In aprotinin, the P1' residue is Ala16, whose side chain is too small to form similar contacts. The loop inversion in textilinin-1 is facilitated by changes in backbone dihedral angles for the P1 and P2' residues, such that they alternate between values in the beta-sheet and alpha-helical regions of the Ramachandran plot. In a comparison with the structures of all other known Kunitz-type serine protease inhibitors, no such conformational variability has been observed. The presence of the bulkier valine as the P1' residue in textilinin-1 appears to be a major contributor to reducing the binding affinity for plasmin as compared to aprotinin (3.5 nm versus 0.053 nm) and could also account for an observed narrower binding specificity.

Structural and functional characterization of SplA, an exclusively specific protease of Staphylococcus aureus

Staphylococcus aureus is a dangerous human pathogen whose antibiotic resistance is steadily increasing and no efficient vaccine is as yet available. This serious threat drives extensive studies on staphylococcal physiology and pathogenicity pathways, especially virulence factors. Spl (serine protease-like) proteins encoded by an operon containing up to six genes are a good example of poorly characterized secreted proteins probably involved in virulence. In the present study, we describe an efficient heterologous expression system for SplA and detailed biochemical and structural characterization of the recombinant SplA protease. The enzyme shares a significant sequence homology to V8 protease and epidermolytic toxins which are well documented staphylococcal virulence factors. SplA has a very narrow substrate specificity apparently imposed by the precise recognition of three amino acid residues positioned N-terminal to the hydrolysed peptide bond. To explain determinants of this extended specificity we resolve the crystal structure of SplA and define the consensus model of substrate binding. Furthermore we demonstrate that artificial N-terminal elongation of mature SplA mimicking a naturally present signal peptide abolishes enzymatic activity. The probable physiological role of the process is discussed. Of interest, even though precise N-terminal trimming is a common regulatory mechanism among S1 family enzymes, the crystal structure of SplA reveals novel significantly different mechanistic details.

First Archaeal PEPB-Serine Protease Inhibitor from Sulfolobus solfataricus with Noncanonical Amino Acid Sequence in the Reactive-Site Loop

The specific inhibition of serine proteinases, which are crucial switches in many important physiological processes, is of great value both for basic research and for therapeutic applications. In this study, we report the molecular cloning of the sso0767 gene from Sulfolobus solfataricus, and the functional characterization of its product, SsCEI, which represents the first archaeal phosphatidylethanolamine-binding protein (PEBP)-serine proteinase inhibitor, reported to date. SsCEI is a monomer protein with a molecular mass of 19.0 kDa and a pI of 6.7, which is able to inhibit the serine proteases alpha-chymotrypsin and elastase with K(i) values of 0.08 and 0.1 microM, respectively. Moreover SsCEI is extremely resistant to both thermal inactivation and proteolytic attack suggesting compact folding of the protein. Within the I51 family, the archaeal inhibitor shows strong similarity to the human and murine members. The three-dimensional model of SsCEI revealed a general beta-fold and the presence of an anion-binding pocket, the hallmark of the PEBP family. Moreover SsCEI binds the cognate proteases according to a common, substrate-like standard mechanism. Point mutation experiments supported the prediction of the protease-binding site located on the surface at the C- terminal region of the protein. Interestingly, searches based on preidentified structural reactive loop motifs revealed the occurrence of a sequence (T123-N130) that is not represented in all serine-protease inhibitor families. This unique motif may provide new insights into both the inhibitor/protease binding mode and the specific biological functions of SsCEI within the PEBP family.

Enzymatic activity of the Staphylococcus aureus SplB serine protease is induced by substrates containing the sequence Trp-Glu-Leu-Gln

Proteases are of significant importance for the virulence of Staphylococcus aureus. Nevertheless, their subset, the serine protease-like proteins, remains poorly characterized. Here presented is an investigation of SplB protease catalytic activity revealing that the enzyme possesses exquisite specificity and only cleaves efficiently after the sequence Trp-Glu-Leu-Gln. To understand the molecular basis for such selectivity, we solved the three-dimensional structure of SplB to 1.8 A. Modeling of substrate binding to the protease demonstrated that selectivity relies in part on a canonical specificity pockets-based mechanism. Significantly, the conformation of residues that ordinarily form the oxyanion hole, an essential structural element of the catalytic machinery of serine proteases, is not canonical in the SplB structure. We postulate that within SplB, the oxyanion hole is only formed upon docking of a substrate containing the consensus sequence motif. It is suggested that this unusual activation mechanism is used in parallel with classical determinants to further limit enzyme specificity. Finally, to guide future development, we attempt to point at likely physiological substrates and thus the role of SplB in staphylococcal physiology.

Cloning, characterization and phylogenetic analyses of members of three major venom families from a single specimen of Walterinnesia aegyptia

Walterinnesia aegyptia is a monotypic elapid snake inhabiting in Africa and Mideast. Although its envenoming is known to cause rapid deaths and paralysis, structural data of its venom proteins are rather limited. Using gel filtration and reverse-phase HPLC, phospholipases A(2) (PLAs), three-fingered toxins (3FTxs), and Kunitz-type protease inhibitors (KIns) were purified from the venom of a single specimen of this species caught in northern Egypt. In addition, specific primers were designed and PCR was carried out to amplify the cDNAs encoding members of the three venom families, respectively, using total cDNA prepared from its venom glands. Complete amino acid sequences of two acidic PLAs, three short chain 3FTxs, and four KIns of this venom species were thus deduced after their cDNAs were cloned and sequenced. They are all novel sequences and match the mass data of purified proteins. For members of each toxin family, protein sequences were aligned and subjected to molecular phylogenetic analyses. The results indicated that the PLAs and a Kunitz inhibitor of W. aegyptia are most similar to those of king cobra venom, and its 3FTxs belongs to either Type I alpha-neurotoxins or weak toxins of orphan-II subtype. It is remarkable that both king cobra and W. aegyptia cause rapid deaths of the victims, and a close evolutionary relationship between them is speculated.

Resisting degradation by human elastase: commonality of design features shared by 'canonical' plant and bacterial macrocyclic protease inhibitor scaffolds

A previously unexplained difference in the resistance to enzymatic hydrolysis of 11-mer Bowman-Birk-type inhibitors of human leukocyte elastase that differ in P1 is found to correlate with the strength of a particular intramolecular hydrogen bond within the inhibitor. This transannular hydrogen bond stabilizes the side chain of the conserved P2 Thr in a 'canonical' +60 degrees -rotamer chi(1) conformation and thereby directs it for a close interaction with the enzyme's catalytic His. As the implications of this NMR analysis are neither limited to this macrocyclic scaffold derived from plant proteins nor to a particular serine protease, we present a unified analysis with inhibitory bacterial depsipeptides of 7-12 residues in length that share key design features for which we propose communal functional explanations.

Solution structure of a novel C2-symmetrical bifunctional bicyclic inhibitor based on SFTI-1

A novel bifunctional bicyclic inhibitor has been created that combines features both from the Bowman-Birk inhibitor (BBI) proteins, which have two distinct inhibitory sites, and from sunflower trypsin inhibitor-1 (SFTI-1), which has a compact bicyclic structure. The inhibitor was designed by fusing together a pair of reactive loops based on a sequence derived from SFTI-1 to create a backbone-cyclized disulfide-bridged 16-mer peptide. This peptide has two symmetrically spaced trypsin binding sites. Its synthesis and biological activity have been reported in a previous communication [Jaulent and Leatherbarrow, 2004, PEDS 17, 681]. In the present study we have examined the three-dimensional structure of the molecule. We find that the new inhibitor, which has a symmetrical 8-mer half-cystine CTKSIPP'I' motif repeated through a C2 symmetry axis also shows a complete symmetry in its three-dimensional structure. Each of the two loops adopts the expected canonical conformation common to all BBIs as well as SFTI-1. We also find that the inhibitor displays a strong and unique structural identity, with a notable lack of minor conformational isomers that characterise most reactive site loop mimics examined to date as well as SFTI-1. This suggests that the presence of the additional cyclic loop acts to restrict conformational mobility and that the deliberate introduction of cyclic symmetry may offer a general route to locking the conformation of beta-hairpin structures.

Peptide arrays with designed secondary structures for protein characterization using fluorescent fingerprint patterns

To realize a practical high-throughput protein-detection system, novel peptide arrays have been constructed using designed peptide libraries with loop, alpha-helix, or beta-strand structures. Here, we describe the overview of the reported designed peptide arrays with loop and alpha-helix structures and the new results of those with beta-strand structures. Initially, several model peptides known to interact with model structured proteins were selected to establish the present strategy for high-throughput detection of proteins. The fluorescent probes and suitable scaffolds of peptides were examined for the effective detection of proteins. The detection methods were established in solution and in an immobilized manner using the model systems. In the case of alpha-helix peptide, the response of a peptide with fluorescent resonance energy transfer between two probes at both termini was several times higher than that of a peptide with a single probe. In the cases of peptides with other structures, however, proteins were effectively detectable even by the fluorescent change of one probe. Furthermore, structurally focused libraries consisting of a total of ca. 250 different peptides based on the model peptides with secondary and/or tertiary structures were constructed with systematic replacement of residues. Using these libraries, various proteins were characterized effectively to give their own fluorescent "protein fingerprint" patterns. The resulting protein fingerprints correlated with the recognition properties of the proteins. These studies demonstrate that arrays with peptide libraries based on designed structures can be promising tools for detecting the target proteins. Designed synthetic peptides play roles as the capturing agents to be developed for practical protein chips.

Crystal structure of trypsin–turkey egg white inhibitor complex

Crystal structure of the complex between porcine beta-trypsin and the second domain of the Kazal-type ovomucoid turkey egg white trypsin inhibitor (OMTKY2) has been determined at 1.9A resolution. A peptide fragment from the first domain has been crystallized with the complex. Restrained-refinement of the structure led to an R-factor of 0.19 for the 32206 reflections. OMTKY2 exhibits the canonical Kazal-type fold with a central alpha-helix and a short two-stranded anti-parallel beta-sheet. The carbonyl carbon of the reactive site prefers trigonal geometry. The reactive site loop geometry of the inhibitor is complementary to the surface and charge of the binding site in beta-trypsin.

The conserved P1' Ser of Bowman-Birk-type proteinase inhibitors is not essential for the integrity of the reactive site loop

The isolated reactive site beta-hairpin loop of Bowman-Birk-type proteinase inhibitors has become a widely studied proteinomimetic because it retains the three-dimensional structure and much of the inhibitory potency of the corresponding region of the complete protein. Here we analyse the role of the P1' Ser residue which is highly conserved and intramolecularly hydrogen bonded in the complete proteins. A combined kinetic and structural analysis of variant proteinomimetic peptides demonstrates that the hydrogen-bond potential of the side-chain oxygen atom of the P1' Ser is not essential for the integrity of the reactive site loop and that it provides only a small contribution to the trypsin affinity and no apparent contribution to the stability against tryptic turnover. We conclude that the potential of the P1' side chain to engineer improved inhibition and selectivity for serine proteinases is best explored further in concert with the side chains of the P2 and P5' residues which may interact or compete for the same space.

Unbound form of tomato inhibitor-II reveals interdomain flexibility and conformational variability in the reactive site loops

The Potato II (Pot II) family of proteinase inhibitors plays important roles in the constitutive and inducible defense of plants against predation by a wide range of pests. The structural basis of inhibition by a multidomain Pot II family inhibitor was revealed recently by the structure of the ternary complex between the two-headed tomato inhibitor-II (TI-II) and two molecules of subtilisin Carlsberg. Here we report the 2.15-A resolution crystal structure of the unbound form of TI-II that reveals significant conformational flexibility in the absence of bound proteinase molecules. The four independent copies of unbound TI-II in the asymmetric unit of the unit cell display a range of different conformations when compared with the bound form of the inhibitor, most strikingly in the orientations of the inhibitory domains and in the conformations of the reactive site loops. One of the two linker segments (residues 74 to 79) between the two domains as well as the adjacent beta-strand in Domain I (residues 80-85) is well ordered in all four copies of the unbound inhibitor, even though this region appeared to be disordered in the structure of the ternary complex. Conformational flexibility seen in the reactive site loops of unbound TI-II suggests a mechanism by which the inhibitor can balance the need for tight binding with the need for broad inhibitory function.

Structural basis of inhibition revealed by a 1:2 complex of the two-headed tomato inhibitor-II and subtilisin Carlsberg

Multidomain proteinase inhibitors play critical roles in the defense of plants against predation by a wide range of pests. Despite a wealth of structural information on proteinase-single domain inhibitor interactions, the structural basis of inhibition by multidomain proteinase inhibitors remains poorly understood. Here we report the 2.5-A resolution crystal structure of the two-headed tomato inhibitor-II (TI-II) in complex with two molecules of subtilisin Carlsberg; it reveals how a multidomain inhibitor from the Potato II family of proteinase inhibitors can bind to and simultaneously inhibit two enzyme molecules within a single ternary complex. The N terminus of TI-II initiates the folding of Domain I (Lys-1 to Cys-15 and Pro-84 to Met-123) and then completes Domain II (Ile-26 to Pro-74) before coming back to complete the rest of Domain I (Pro-84 to Met-123). The two domains of TI-II adopt a similar fold and are arranged in an extended configuration that presents two reactive site loops at the opposite ends of the inhibitor molecule. Each subtilisin molecule interacts with a reactive site loop of TI-II through the standard, canonical binding mode. Remarkably, a significant distortion of the active site of subtilisin is induced by the presence of phenylalanine in the P1 position of reactive site loop II of TI-II. The structure of the TI-II.(subtilisin)2 complex provides a molecular framework for understanding how multiple inhibitory domains in a single Potato II type proteinase inhibitor molecule from the Potato II family act to inhibit proteolytic enzymes.

The structural basis of a conserved P2 threonine in canonical serine proteinase inhibitors

Bowman-Birk inhibitors (BBIs) are a well-studied family of canonical inhibitor proteins of serine proteinases. In nature, the active region of BBIs possesses a highly conserved Thr at the P2 position. The importance of this residue has been reemphasized by synthetic BBI reactive site loop proteinomimetics. In particular, this residue was exclusively identified for active chymotrypsin inhibitors selected from a BBI template-assisted combinatorial peptide library. A further kinetic analysis of 26 P2 variant peptides revealed that Thr provides both optimal binding affinity and optimal resistance against enzymatic turnover by chymotrypsin. Herein, we report the (1)H-NMR spectroscopic study of a 5-membered sub-set of these reactive site loop peptides representing a stepwise elimination of the Thr side-chain functionalities and inversion of its side-chain chirality. The P2 Thr variant adopts a three-dimensional structure that closely mimics the one of the corresponding region of the complete protein. This validates the use of this template for the investigation of structure-function relationships. While the overall backbone geometry is similar in all studied variants, conformational changes induced by the modification of the P2 side chain have now been identified and provide a rational explanation of the kinetically observed functional differences. Eliminating the gamma-methyl group has little structural effect, whereas the elimination of the gamma-oxygen atom or the inversion of the side-chain chirality results in characteristic changes to the intramolecular hydrogen bond network. We conclude that the transannular hydrogen bond between the P2 Thr side-chain hydroxyl and the P5' backbone amide is an important conformational constraint and directs the hydrophobic contact of the P2 Thr side chain with the enzyme surface in a functionally optimal geometry, both in the proteinomimetic and the native protein. In at least four canonical inhibitor protein families similar structural arrangements for a conserved P2 Thr have been observed, which suggests an analogous functional role. Substitutions at P2 of the proteinomimetic also affect the conformational balance between cis and trans isomers at a distant Pro-Pro motif (P3'-P4'). Presented with a mixture of cis/trans isomers chymotrypsin appears to interact preferably with the conformer that retains the cis-P3' Pro-trans-P4' Pro geometry found in the parent BBI protein.

Construction of a protein-detection system using a loop peptide library with a fluorescence label

Construction of a novel protein-detection system was carried out using a designed peptide library with fluorescent labels based on loop structures. As a basic model study, detection of alpha-amylase using fluorescent-labeled peptides derived from an active loop of tendamistat was examined. The detection methods for proteins with immobilized peptides as well as peptides in solution have been successfully established. Based on these results, a loop peptide library that has various turn sequences grafted on a stable loop structure has been constructed. Various proteins with recognition patterns corresponding, for instance, to "protein fingerprints" could be detected using an immobilized peptide library. The present results suggest that the system can be applied to the development of a peptide microarray that behaves as a protein chip.

NMR structures of two variants of bovine pancreatic trypsin inhibitor (BPTI) reveal unexpected influence of mutations on protein structure and stability

Here we determined NMR solution structures of two mutants of bovine pancreatic trypsin inhibitor (BPTI) to reveal structural reasons of their decreased thermodynamic stability. A point mutation, A16V, in the solvent-exposed loop destabilizes the protein by 20 degrees C, in contrast to marginal destabilization observed for G, S, R, L or W mutants. In the second mutant introduction of eight alanine residues at proteinase-contacting sites (residues 11, 13, 17, 18, 19, 34, 37 and 39) provides a protein that denatures at a temperature about 30 degrees C higher than expected from additive behavior of individual mutations. In order to efficiently determine structures of these variants, we applied a procedure that allows us to share data between regions unaffected by mutation(s). NOAH/DYANA and CNS programs were used for a rapid assignment of NOESY cross-peaks, structure calculations and refinement. The solution structure of the A16V mutant reveals no conformational change within the molecule, but shows close contacts between V16, I18 and G36/G37. Thus, the observed 4.3kcal/mol decrease of stability results from a strained local conformation of these residues caused by introduction of a beta-branched Val side-chain. Contrary to the A16V mutation, introduction of eight alanine residues produces significant conformational changes, manifested in over a 9A shift of the Y35 side-chain. This structural rearrangement provides about 6kcal/mol non-additive stabilization energy, compared to the mutant in which G37 and R39 are not mutated to alanine residues.

A clogged gutter mechanism for protease inhibitors

A classical peptide inhibitor of serine proteases that is hydrolyzed approximately 10(7) times more slowly than a good substrate is shown to form an acyl-enzyme intermediate rapidly. Despite this quick first step, further reaction is slowed dramatically because of tight and oriented binding of the cleaved peptide, preventing acyl-enzyme hydrolysis and favoring the reverse reaction. Moreover, this mechanism appears to be common to a large class of tight-binding serine protease inhibitors that mimic good substrates. The arrest of enzymatic reaction at the intermediate stage allowed us to determine that the consensus nucleophilic attack angle is close to 90 degrees in the reactive Michaelis complexes.

Predicting function from structure: examples of the serine protease inhibitor canonical loop conformation found in extracellular proteins

The prediction of protein function from structure is becoming of growing importance in the age of structural genomics. We have focused on the problem of identifying sites of potential serine protease inhibitor interactions on the surface of proteins of known structure. Given that there is no sequence conservation within canonical loops from different inhibitor families we first compare representative loops to all fragments of equal length among proteins of known structure by calculating main-chain RMS deviation. Fragments with RMS deviation below a certain threshold (hits) are removed if residues have solvent accessibilities appreciably lower than those observed in the search structure. These remaining hits are further filtered to remove those occurring largely within secondary structure elements. Likely functional significance is restricted further by considering only extracellular protein domains. Also a test is performed to see if the loop can dock into the binding site of the serine protease trypsin without unacceptable steric clashes. By comparing different canonical loop structures to the protein structure database we show that the method was able to detect previously known inhibitors. In addition, we discuss potentially new canonical loop structures found in secreted hydrolases, toxins, viral proteins, cytokines and other proteins. We discuss the possible functional significance of several of the examples found.

The role of Asn14 in the stability and conformation of the reactive-site loop of winged bean chymotrypsin inhibitor: crystal structures of two point mutants Asn14-->Lys and Asn14-->Asp

A double-headed chymotrypsin inhibitor, WCI, from winged bean seeds was cloned for structural and biochemical studies. The inhibitor was subjected to two point mutations at a conserved position, Asn14. This residue, known to have a pivotal role in stabilizing the first reactive-site loop (Gln63-Phe68) of the inhibitor, is highly conserved in the sequences of the other members of Kunitz (STI) family as well as in the sequences of Kazal family of serine protease inhibitors. The mutants, N14K and N14D, were subjected to biochemical assay and their characteristics were compared with those of the recombinant inhibitor (rWCI). Crystallographic studies of the recombinant and the mutant proteins are discussed. These studies were primarily aimed at understanding the importance of the protein scaffolding towards the conformational rigidity of the reactive-site loop. Our analysis reveals that, as the Lys14 side chain takes an unusual fold in N14K and the Asp14 side chain in N14D interacts with the loop residues by water-mediated hydrogen bonds, the canonical conformation of the loop has remained effectively intact in both the mutant structures. However, minor alterations such as a 2-fold increase in the inhibitory affinity towards the cognate enzyme were observed.

The Bowman-Birk inhibitor reactive site loop sequence represents an independent structural beta-hairpin motif

We have determined the NMR structure in aqueous solution of a disulphide-cyclised 11-residue peptide that forms a stable beta-hairpin, incorporating a type VIb beta-turn. The structure is found to be extremely well ordered for a short peptide, with the 30 lowest energy simulated annealing structures having an average pairwise r.m.s. deviation of only 0.36 A over the backbone. All but three side-chains adopt distinct conformations, allowing a detailed analysis of their involvement in cross-strand interactions. The peptide sequence analysed originates from a previously reported study, which identified potent inhibitors of human leukocyte elastase from screening a combinatorial peptide library based on the short protein beta-sheet segment that forms the reactive site loop of Bowman-Birk inhibitors. A detailed comparison of the peptide's solution structure with the corresponding region in the whole protein structure reveals a very good correspondence not only for the backbone (r.m.s. deviation approximately 0.7 A) but also for the side-chains. This isolated beta-hairpin retains the biologically active "canonical conformation" typical of small serine proteinase inhibitor proteins, which explains why it retains inhibitory activity. Since the structural integrity is sequence-inherent and does not depend upon the presence of the remaining protein, this beta-hairpin represents an independent structural motif and so provides a useful model of this type of protein architecture and its relation to biological function. The relationship between the conformation of this beta-hairpin and its biological activity is discussed.

Primary structure of potato kunitz-type serine proteinase inhibitor

The serine proteinase inhibitor (PSPI-21) isolated from potato tubers (Solanum tuberosum L.) comprises two protein species with pI 5.2 and 6.3, denoted as PSPI-21-5.2 and PSPI-21-6.3, respectively. They were separated by anion exchange chromatography on a Mono Q FPLC column. Both species tightly inhibit human leukocyte elastase, whereas their interaction with trypsin and chymotrypsin is substantially weaker. The sequences of both PSPI-21-5.2 and PSPI-21-6.3 were determined by analysis of overlapping peptides obtained from the oxidized or reduced and S-pyridylethylated proteins after digestion with trypsin or pepsin. Both species of PSPI-21 are composed of two chains, named chains A and B, which are linked by a disulfide bridge between Cys(146) and Cys(157). The other disulfide bridge is located within the A chains between Cys(48) and Cys(97). The amino acid sequences of the large A chains of the two forms, consisting of 150 amino acids residues each, differ in a single residue at position 52. The small chains B, containing 37 and 36 residues in PSPI-21-6.3 and PSPI-21-5.2, respectively, have nine different residues. The entire amino acid sequences of the two inhibitors show a high degree of homology to the other Kunitz-type proteinase inhibitors from plants.

Substitutions at the P(1) position in BPTI strongly affect the association energy with serine proteinases

The role of the S(1) subsite in trypsin, chymotrypsin and plasmin has been examined by measuring the association with seven different mutants of bovine pancreatic trypsin inhibitor (BPTI); the mutants contain Gly, Ala, Ser, Val, Leu, Arg, and Trp at the P(1) position of the reactive site. The effects of substitutions at the P(1) position on the association constants are very large, comprising seven orders of magnitude for trypsin and plasmin, and over five orders for chymotrypsin. All mutants showed a decrease of the association constant to the three proteinases in the same order: Ala>Gly>Ser>Arg>Val>Leu>Trp. Calorimetric and circular dichroism methods showed that none of the P1 substitutions, except the P1-Val mutant, lead to destabilisation of the binding loop conformation. The X-ray structure of the complex formed between bovine beta-trypsin and P(1)-Leu BPTI showed that the P(1)-Leu sterically conflicts with the side-chain of P(3)-Ile, which thereby is forced to rotate approximately 90 degrees. Ile18 (P(3)) in its new orientation, in turn interacts with the Tyr39 side-chain of trypsin. Introduction of a large side-chain at the P1' position apparently leads to a cascade of small alterations of the trypsin-BPTI interface that seem to destabilise the complex by it adopting a less optimized packing and by tilting the BPTI molecule up to 15 degrees compared to the native trypsin-BPTI complex.

NMR solution structure of Apis mellifera chymotrypsin/cathepsin G inhibitor-1 (AMCI-1): structural similarity with Ascaris protease inhibitors

The three-dimensional structure of the 56 residue polypeptide Apis mellifera chymotrypsin/cathepsin G inhibitor 1 (AMCI-1) isolated from honey bee hemolymph was calculated based on 730 experimental NMR restraints. It consists of two approximately perpendicular beta-sheets, several turns, and a long exposed loop that includes the protease binding site. The lack of extensive secondary structure features or hydrophobic core is compensated by the presence of five disulfide bridges that stabilize both the protein scaffold and the binding loop segment. A detailed analysis of the protease binding loop conformation reveals that it is similar to those found in other canonical serine protease inhibitors. The AMCI-1 structure exhibits a common fold with a novel family of inhibitors from the intestinal parasitic worm Ascaris suum. The pH-induced conformational changes in the binding loop region observed in the Ascaris inhibitor ATI are absent in AMCI-1. Similar binding site sequences and structures strongly suggest that the lack of the conformational change can be attributed to a Glu-->Gln substitution at the P1' position in AMCI-1, compared to ATI. Analysis of amide proton temperature coefficients shows very good correlation with the presence of hydrogen bond donors in the calculated AMCI-1 structure.

Evaluation of protein-protein association energies by free energy perturbation calculations

The association energy upon binding of different amino acids in the specificity pocket of trypsin was evaluated by free energy perturbation calculations on complexes between bovine trypsin (BT) and bovine pancreatic trypsin inhibitor (BPTI). Three simulations of mutations of the primary binding residue (P(1)) were performed (P(1)-Ala to Gly, P(1)-Met to Gly and P(1)-Met to Ala) and the resulting differences in association energy (DeltaDeltaG(a)) are 2. 28, 5.08 and 2.93 kcal/mol for P(1)-Ala to Gly, P(1)-Met to Gly and to Ala with experimental values of 1.71, 4.62 and 2.91 kcal/mol, respectively. The calculated binding free energy differences are hence in excellent agreement with the experimental binding free energies. The binding free energies, however, were shown to be highly dependent on water molecules at the protein-protein interface and could only be quantitatively estimated if the correct number of such water molecules was included. Furthermore, the cavities that were formed when a large amino acid side-chain is perturbed to a smaller one seem to create instabilities in the systems and had to be refilled with water molecules in order to obtain reliable results. In addition, if the protein atoms that were perturbed away were not replaced by water molecules, the simulations dramatically overestimated the initial state of the free energy perturbations.

What can the structures of enzyme-inhibitor complexes tell us about the structures of enzyme substrate complexes?

Proteinases perform many beneficial functions that are essential to life, but they are also dangerous and must be controlled. Here we focus on one of the control mechanisms: the ubiquitous presence of protein proteinase inhibitors. We deal only with a subset of these: the standard mechanism, canonical protein inhibitors of serine proteinases. Each of the inhibitory domains of such inhibitors has one reactive site peptide bond, which serves all the cognate enzymes as a substrate. The reactive site peptide bond is in a combining loop which has an identical conformation in all inhibitors and in all enzyme-inhibitor complexes. There are at least 18 families of such inhibitors. They all share the conformation of the combining loops but each has its own global three-dimensional structure. Many three-dimensional structures of enzyme-inhibitor complexes were determined. They are frequently used to predict the conformation of substrates in very short-lived enzyme-substrate transition state complexes. Turkey ovomucoid third domain and eglin c have a Leu residue at P(1). In complexes with chymotrypsin, these P(1) Leu residues assume the same conformation. The relative free energies of binding of P(1) Leu (relative to either P(1) Gly or P(1) Ala) are within experimental error, the same for complexes of turkey ovomucoid third domain, eglin c, P(1) Leu variant of bovine pancreatic trypsin inhibitor and of a substrate with chymotrypsin. Therefore, the P(1) Leu conformation in transition state complexes is predictable. In contrast, the conformation of P(1) Lys(+) is strikingly different in the complexes of Lys(18) turkey ovomucoid third domain and of bovine pancreatic trypsin inhibitor with chymotrypsin. The relative free energies of binding are also quite different. Yet, the relative free energies of binding are nearly identical for Lys(+) in turkey ovomucoid third domain and in a substrate, thus allowing us to know the structure of the latter. Similar reasoning is applied to a few other systems.

The serine protease inhibitor canonical loop conformation: examples found in extracellular hydrolases, toxins, cytokines and viral proteins

Methods for the prediction of protein function from structure are of growing importance in the age of structural genomics. Here, we focus on the problem of identifying sites of potential serine protease inhibitor interactions on the surface of proteins of known structure. Given that there is no sequence conservation within canonical loops from different inhibitor families, we first compare representative loops to all fragments of equal length among proteins of known structure by calculating main-chain RMS deviation. Fragments with RMS deviation below a certain threshold (hits) are removed if residues have solvent accessibilities appreciably lower than those observed in the search structure. These remaining hits are further filtered to remove those occurring largely within secondary structure elements. Likely functional significance is restricted further by considering only extracellular protein domains. By comparing different canonical loop structures to the protein structure database, we show that the method is able to detect previously known inhibitors. In addition, we discuss potentially new canonical loop structures found in secreted hydrolases, toxins, viral proteins, cytokines and other proteins. We discuss the possible functional significance of several of the examples found, and comment on implications for the prediction of function from protein 3D structure.

High-resolution structure of bovine pancreatic trypsin inhibitor with altered binding loop sequence

A mutant of bovine pancreatic trypsin inhibitor (BPTI) has been constructed and expressed in Escherichia coli in order to probe the kinetic and structural consequences of truncating the binding loop residues to alanine. In addition to two such mutations (Thr11Ala and Pro13Ala), it has a conservative Lys15Arg substitution at position P(1) and an unrelated Met52Leu change. In spite of the binding loop modification, the affinity for trypsin is only 30 times lower than that of the wild-type protein. At pH 7.5 the protein can be crystallized on the time-scale of hours, yielding very stable crystals of a new (tetragonal) form of BPTI. Conventional source X-ray data collected to 1.4 A at room temperature allowed anisotropic structure refinement characterized by R=0.1048. The structure reveals all 58 residues, including the complete C terminus, which is in a salt-bridge contact with the N terminus. The Cys14-Cys38 disulfide bridge is observed in two distinct chiralities. This bridge, together with an internal water molecule, contributes to the stabilization of the binding loop. The Ala mutations have only an insignificant and localized effect on the binding loop, which retains its wild-type conformation (maximum deviation of loop C(alpha) atoms of 0.7 A at Ala13). Four (instead of the typical three) additional water molecules are buried in an internal cleft and connected to the surface via a sulfate anion. Three more SO(4)(2-) anions are seen in the electron density, one of them located on a 2-fold axis. It participates in the formation of a dimeric structure between symmetry-related BPTI molecules, in which electrostatic and hydrogen bonding interactions resulting from the mutated Lys15Arg substitution are of central importance. This dimeric interaction involves direct recognition loop-recognition loop contacts, part of which are hydrophobic interactions of the patches created by the alanine mutations. Another 2-fold symmetric interaction between the BPTI molecules involves the formation of an antiparallel intermolecular beta-sheet that, together with the adjacent intramolecular beta-hairpin loops, creates a four-stranded structure.

Interscaffolding additivity: binding of P1 variants of bovine pancreatic trypsin inhibitor to four serine proteases

Different families of protein inhibitors of serine proteases share similar conformation of the enzyme-binding loop, while their scaffoldings are completely different. In the enzyme-inhibitor complex, the P1position of the loop makes numerous contacts within the S1pocket and significantly influences the energy of the interaction. Here, we determine the association energies (DeltaGavalues) for the interaction of coded P1variants of bovine pancreatic trypsin inhibitor (BPTI) with bovine beta-trypsin (BT), anionic salmon trypsin (AST), bovine alpha-chymotrypsin (BCHYM), and human neutrophil elastase (HNE). The respective DeltaGaranges are 15, 13, 9, and 8 kcal mol-1(1 cal=4.18 J). Next, through interscaffolding additivity cycles, we compare our set of DeltaGavalues determined for BCHYM and HNE with similar data sets available in the literature for three other inhibitor families. The analysis of the cycles shows that 27 to 83 % of cycles fulfil the criteria of additvity. In one particular case (comparison of associations of P1variants of BPTI and OMTKY3 with BCHYM) there is a structural basis for strongly non-additive behaviour. We argue that the interscaffolding additvity depends on sequential and conformational similarities of sites where the mutation(s) are introduced and on the particular substitution. In the second interscaffolding analysis, we compare binding of the same P1mutants to BT and AST. The high correlation coefficient shows that both trypsins recognize with comparable strength the non-cognate side-chains. However, the cognate Arg and Lys side-chains are recognized significantly more strongly by AST.

The crystal structures of the complexes between bovine beta-trypsin and ten P1 variants of BPTI

The high-resolution X-ray structures have been determined for ten complexes formed between bovine beta-trypsin and P1 variants (Gly, Asp, Glu, Gln, Thr, Met, Lys, His, Phe, Trp) of bovine pancreatic trypsin inhibitor (BPTI). All the complexes were crystallised from the same conditions. The structures of the P1 variants Asp, Glu, Gln and Thr, are reported here for the first time in complex with any serine proteinase. The resolution of the structures ranged from 1.75 to 2.05 A and the R-factors were about 19-20 %. The association constants of the mutants ranged from 1.5x10(4) to 1.7x10(13) M-1. All the structures could be fitted into well-defined electron density, and all had very similar global conformations. All the P1 mutant side-chains could be accomodated at the primary binding site, but relative to the P1 Lys, there were small local changes within the P1-S1 interaction site. These comprised: (1) changes in the number and dynamics of water molecules inside the pocket; (2) multiple conformations and non-optimal dihedral angles for some of the P1 side-chains, Ser190 and Gln192; and (3) changes in temperature factors of the pocket walls as well as the introduced P1 side-chain. Binding of the cognate P1 Lys is characterised by almost optimal dihedral angles, hydrogen bonding distances and angles, in addition to considerably lower temperature factors. Thus, the trypsin S1 pocket seems to be designed particularly for lysine binding.