Novel experimental study of receptor-mediated bacterial adhesion under the influence of fluid shear

Interplay of physico-chemical and mechanical bacteria-surface interactions with transport processes controls early biofilm growth: A review

Biofilms initiate when bacteria encounter and are retained on surfaces. The surface orchestrates biofilm growth through direct physico-chemical and mechanical interactions with different structures on bacterial cells and, in turn, through its influence on cell-cell interactions. Individual cells respond directly to a surface through mechanical or chemical means, initiating "surface sensing" pathways that regulate gene expression, for instance producing extra cellular matrix or altering phenotypes. The surface can also physically direct the evolving colony morphology as cells divide and grow. In either case, the physico-chemistry of the surface influences cells and cell communities through mechanisms that involve additional factors. For instance the numbers of cells arriving on a surface from solution relative to the generation of new cells by division depends on adhesion and transport kinetics, affecting early colony density and composition. Separately, the forces experienced by adhering cells depend on hydrodynamics, gravity, and the relative stiffnesses and viscoelasticity of the cells and substrate materials, affecting mechanosensing pathways. Physical chemistry and surface functionality, along with interfacial mechanics also influence cell-surface friction and control colony morphology, in particular 2D and 3D shape. This review focuses on the current understanding of the mechanisms in which physico-chemical interactions, deriving from surface functionality, impact individual cells and cell community behavior through their coupling with other interfacial processes.

Effects of Hydrophilicity, Adhesion Work, and Fluid Flow on Biofilm Formation of PDMS in Microfluidic Systems

Polydimethylsiloxane (PDMS) has been the most widely used material in microfluidic systems, especially for cell biology applications. However, the antibacterial performance of PDMS in flow conditions has never been reported in the literature. In this paper, we analyzed the effects of contact angle (CA), adhesion force (work), and surface free energy on the antibacterial activities of PDMS by varying the ratio of curing agents (crosslinking degree) and surface modification with oxygen plasma. The results show that the Young's modulus has no particular effects on bacterial adhesion compared to the CAs of samples. For the first time, we analyzed the adhesion work (AW) effect on biofilm formation, and we found that biofilms tend to form on the surface with less AW. Furthermore, we analyzed the dual effect of hydrophilicity and shear force induced by fluid flow on the bacterial adhesion in PDMS microfluidic systems. We found that at low flow rates in microfluidic conditions, the adhesion of the bacteria on the PDMS surface is inhibited when the fluid flow exceeds a certain value. It required higher shear force to inhibit bacterial adhesion on the hydrophilic surface than on the hydrophobic surface. Therefore, hydrophilicity might be the dominant factor affecting bacterial adhesion.

Interaction of enzymes with lignocellulosic materials: causes, mechanism and influencing factors

For the production of biofuel (bioethanol), enzymatic adsorption onto a lignocellulosic biomass surface is a prior condition for the enzymatic hydrolysis process to occur. Lignocellulosic substances are mainly composed of cellulose, hemicellulose and lignin. The polysaccharide matrix (cellulose and hemicellulose) is capable of producing bioethanol. Therefore, lignin is removed or its concentration is reduced from the adsorption substrates by pretreatments. Selected enzymes are used for the production of reducing sugars from cellulosic materials, which in turn are converted to bioethanol. Adsorption of enzymes onto the substrate surface is a complicated process. A large number of research have been performed on the adsorption process, but little has been done to understand the mechanism of adsorption process. This article reviews the mechanisms of adsorption of enzymes onto the biomass surfaces. A conceptual adsorption mechanism is presented which will fill the gaps in literature and help researchers and industry to use adsorption more efficiently. The process of enzymatic adsorption starts with the reciprocal interplay of enzymes and substrates and ends with the establishment of molecular and cellular binding. The kinetics of an enzymatic reaction is almost the same as that of a characteristic chemical catalytic reaction. The influencing factors discussed in detail are: surface characteristics of the participating materials, the environmental factors, such as the associated flow conditions, temperature, concentration, etc. Pretreatment of lignocellulosic materials and optimum range of shear force and temperature for getting better results of adsorption are recommended.

Microfluidic Shear Assay to Distinguish between Bacterial Adhesion and Attachment Strength on Stiffness-Tunable Silicone Substrates

Tuning surface composition and stiffness is now an established strategy to improve the integration of medical implants. Recent evidence suggests that matrix stiffness affects bacterial adhesion, but contradictory findings have been reported in the literature. Distinguishing between the effects of bacterial adhesion and attachment strength on these surfaces may help interpret these findings. Here, we develop a precision microfluidic shear assay to quantify bacterial adhesion strength on stiffness-tunable and biomolecule-coated silicone materials. We demonstrate that bacteria are more strongly attached to soft silicones, compared to stiff silicones; as determined by retention against increasing shear flows. Interestingly, this effect is reduced when the surface is coated with matrix biomolecules. These results demonstrate that bacteria do sense and respond to stiffness of the surrounding environment and that precisely defined assays are needed to understand the interplay among surface mechanics, composition, and bacterial binding.

Mechanical Properties and Concentrations of Poly(ethylene glycol) in Hydrogels and Brushes Direct the Surface Transport of Staphylococcus aureus

Surface-associated transport of flowing bacteria, including cell rolling, is a mechanism for otherwise immobile bacteria to migrate on surfaces and could be associated with biofilm formation or the spread of infection. This work demonstrates how the moduli and/or local polymer concentration play critical roles in sustaining contact, dynamic adhesion, and transport of bacterial cells along a hydrogel or hydrated brush surface. In particular, stiffer more concentrated hydrogels and brushes maintained the greatest dynamic contact, still allowing cells to travel along the surface in flow. This study addressed how the mechanical properties, molecular architectures, and thicknesses of minimally adhesive poly(ethylene glycol) (PEG)-based coatings influence the flow-driven surface motion of Staphylococcus aureus MS2 cells. Three protein-repellant PEG-dimethylacrylate hydrogel films (∼100 μm thick) and two protein-repellant PEG brushes (8-16 nm thick) were sufficiently fouling-resistant to prevent the accumulation of flowing bacteria. However, the rolling or hopping-like motions of gently flowing S. aureus cells along the surfaces were specific to the particular hydrogel or brush, distinguishing these coatings in terms of their mechanical properties (with moduli from 2 to 1300 kPa) or local PEG concentrations (in the range 10-50% PEG). On the stiffer hydrogel coatings having higher PEG concentrations, S. aureus exhibited long runs of surface rolling, 20-50 μm in length, an increased tendency of cells to repeatedly return to some surfaces after rolling and escaping, and relatively long integrated contact times. By contrast, on the softer more dilute hydrogels, bacteria tended to encounter the surface for brief periods before escaping without return. The dynamic adhesion and motion signatures of the cells on the two brushes were bracketed by those on the soft and stiff hydrogels, demonstrating that PEG coating thickness was not important in these studies where the vertically oriented surfaces minimized the impact of gravitational forces. Control studies with similarly sized poly(ethylene oxide)-coated rigid spherical microparticles, that also did not arrest on the PEG coatings, established that the bacterial skipping and rolling signatures were specific to the S. aureus cells and not simply diffusive. Dynamic adhesion of the S. aureus cells on the PEG hydrogel surfaces correlated well with quiescent 24 h adhesion studies in the literature, despite the orientation of the flow studies that eliminated the influence of gravity on bacteria-coating normal forces.

Influence of oral bacteria on adhesion of Streptococcus mutans and Streptococcus sanguinis to dental materials

In this study, the effect of bacterial multispecies communities on the adhesion of Streptococcus mutans and Streptococcus sanguinis to dental restorative material was investigated. The saliva-coated specimens of zirconia and composite were incubated with the following combinations: single species, S. mutans or S. sanguinis; two species, single species combined with other oral streptococci; multiple species, combination of Actinomyces naeslundii, Fusobacterium nucleatum, and Prevotella ssp.; and the two-species combinations. The adherent bacteria were counted after plating of serial dilutions. Effects of material and bacteria on adhesion of S. mutans and S. sanguinis were evaluated with multiple linear regression analyses. No significant differences between the materials regarding the adhesion of S. mutans and S. sanguinis were observed. The adhesion of S. mutans was negatively influenced by the presence of other streptococci. Enhancing effects (610.6%) were seen in the presence of Prevotella intermedia. The adhesion of S. sanguinis decreased in the presence of other bacteria, except F. nucleatum (increase of 717.4%). Significant inhibitory effects were detected in the presence of S. mutans and A. naeslundii (reduction of 95.9% and 78.5%, respectively). The results of this study suggest that adhesion of both types of streptococci to restorative materials is influenced by various bacterial interactions.

Bacterially Antiadhesive, Optically Transparent Surfaces Inspired from Rice Leaves

Because of the growing prevalence of antimicrobial resistance strains, there is an increasing need to develop material surfaces that prevent bacterial attachment and contamination in the absence of antibiotic agents. Herein, we present bacterial antiadhesive materials inspired from rice leaves. "Rice leaf-like surfaces" (RLLS) were fabricated by a templateless, self-masking reactive-ion etching approach. Bacterial attachment on RLLS was characterized under both static and dynamic conditions using Gram-negative Escherichia coli O157:H7 and Gram-positive Staphylococcus aureus. RLLS surfaces showed exceptional bacterial antiadhesion properties with a >99.9% adhesion inhibition efficiency. Furthermore, the optical properties of RLLS were investigated using UV-vis-NIR spectrophotometry. In contrast to most other bacterial antiadhesive surfaces, RLLS demonstrated optical-grade transparency (i.e., ≥92% transmission). We anticipate that the combination of bacterial antiadhesion efficiency, optical grade transparency, and the convenient single-step method of preparation makes RLLS a very attractive candidate for the surfaces of biosensors; endoscopes; and microfluidic, bio-optical, lab-on-a-chip, and touchscreen devices.

Proteomic analysis of Staphylococcus aureus biofilm cells grown under physiologically relevant fluid shear stress conditions

BACKGROUND

The biofilm forming bacterium Staphylococcus aureus is responsible for maladies ranging from severe skin infection to major diseases such as bacteremia, endocarditis and osteomyelitis. A flow displacement system was used to grow S. aureus biofilms in four physiologically relevant fluid shear rates (50, 100, 500 and 1000 s(-1)) to identify proteins that are associated with biofilm.

RESULTS

Global protein expressions from the membrane and cytosolic fractions of S. aureus biofilm cells grown under the above shear rate conditions are reported. Sixteen proteins in the membrane-enriched fraction and eight proteins in the cytosolic fraction showed significantly altered expression (p < 0.05) under increasing fluid shear. These 24 proteins were identified using nano-LC-ESI-MS/MS. They were found to be associated with various metabolic functions such as glycolysis / TCA pathways, protein synthesis and stress tolerance. Increased fluid shear stress did not influence the expression of two important surface binding proteins: fibronectin-binding and collagen-binding proteins.

CONCLUSIONS

The reported data suggest that while the general metabolic function of the sessile bacteria is minimal under high fluid shear stress conditions, they seem to retain the binding capacity to initiate new infections.

Responses of Staphylococcus aureus bacterial cells to nanocrystalline nickel nanostructures

A broad range of human diseases are associated with bacterial infections, often initiated by specific adhesion of a bacterium to the target environment. Despite the significant role of bacterial adhesion in human infectious diseases, details and mechanisms of bacterial adhesion have remained elusive. Herein, we study the physical interactions between Staphylococcus aureus, a type of micro-organism relevant to infections associated with medical implants, and nanocrystalline (nc) nickel nanostructures with various columnar features, including solid core, hollow, x-shaped and c-shaped pillars. Scanning electron microscopy results show the tendency of these bacterial cells to attach to the nickel nanostructures. Moreover, unique single bacterium attachment characteristics were observed on nickel nanostructures with dimensions comparable to the size of a single bacterium.

Adsorption behavior of human plasma fibronectin on hydrophobic and hydrophilic Ti6Al4V substrata and its influence on bacterial adhesion and detachment

Biomaterial implant-associated infections, a common cause of medical devices' failure, are initiated by bacterial adhesion to an adsorbed protein layer on the implant material surface. In this study, the influence of protein surface orientation on bacterial adhesion has been examined using three clinically relevant bacterial strains known to express specific binding sites for human plasma fibronectin (HFN). HFN was allowed to adsorb on hydrophobic Ti6Al4V and physically modified hydrophilic Ti6Al4V substrata. Ellipsometric data reveal that the characteristics of the adsorbed protein layers primary depend on solid surface tension and the initial protein concentration in solution. In particular, HFN molecules adopt a more extended conformation on hydrophobic than hydrophilic surfaces, an effect that is more pronounced at low than at high initial protein concentrations. Moreover, the extended conformation of the protein molecules on these surfaces likely facilitates the exposure of specific sites for adhesion, resulting in the higher bacterial-cell attachment observed regardless of the strain considered. Contact angle measurements and the analysis of the number of remaining adhering cells after being subjected to external forces further suggest that both specific and nonspecific (hydrophobic) interactions play an important role on bacterial attachment. This study is the first one to evaluate the influence of surface hydrophobicity on protein adsorption and its subsequent effect on bacterial adhesion using a material whose hydrophobicity was not modified using chemical treatments that potentially led to surface properties changes other than hydrophobicity.

Infection of orthopedic implants with emphasis on bacterial adhesion process and techniques used in studying bacterial-material interactions

Staphylococcus comprises up to two-thirds of all pathogens in orthopedic implant infections and they are the principal causative agents of two major types of infection affecting bone: septic arthritis and osteomyelitis, which involve the inflammatory destruction of joint and bone. Bacterial adhesion is the first and most important step in implant infection. It is a complex process influenced by environmental factors, bacterial properties, material surface properties and by the presence of serum or tissue proteins. Properties of the substrate, such as chemical composition of the material, surface charge, hydrophobicity, surface roughness and the presence of specific proteins at the surface, are all thought to be important in the initial cell attachment process. The biofilm mode of growth of infecting bacteria on an implant surface protects the organisms from the host immune system and antibiotic therapy. The research for novel therapeutic strategies is incited by the emergence of antibiotic-resistant bacteria. This work will provide an overview of the mechanisms and factors involved in bacterial adhesion, the techniques that are currently being used studying bacterial-material interactions as well as provide insight into future directions in the field.

Fluorescent silica particles for monitoring oxygen levels in three-dimensional heterogeneous cellular structures

Bacterial biofilms are a major obstacle challenging the development of more effective therapies to treat implant infections. Oxygen availability to bacterial cells has been implicated in biofilm formation and planktonic cell detachment; however, there are insufficient tools available to measure oxygen concentrations within complex three-dimensional structures with ∼ 1 µm resolution. Such measurements may complement measures of biofilm structure and cell activity to provide a more comprehensive understanding of biofilm biology. Thus, we developed oxygen-sensing microparticles specifically designed to characterize oxygen transport through the volume of bacterial biofilms. The Stöber method was used to synthesize monodisperse silica microparticles of approximately the same size as a bacterium (∼ 1 µm). Two fluorophores, oxygen-sensitive Ru(Ph(2) phen(3))Cl(2), and the reference fluorophore Nile blue chloride were immobilized on the surface of the particles. We demonstrate application of the microparticles toward measuring the oxygen concentration profiles within a live Staphylococcus aureus biofilm.

Induction of attachment-independent biofilm formation and repression of Hfq expression by low-fluid-shear culture of Staphylococcus aureus

The opportunistic pathogen Staphylococcus aureus encounters a wide variety of fluid shear levels within the human host, and they may play a key role in dictating whether this organism adopts a commensal interaction with the host or transitions to cause disease. By using rotating-wall vessel bioreactors to create a physiologically relevant, low-fluid-shear environment, S. aureus was evaluated for cellular responses that could impact its colonization and virulence. S. aureus cells grown in a low-fluid-shear environment initiated a novel attachment-independent biofilm phenotype and were completely encased in extracellular polymeric substances. Compared to controls, low-shear-cultured cells displayed slower growth and repressed virulence characteristics, including decreased carotenoid production, increased susceptibility to oxidative stress, and reduced survival in whole blood. Transcriptional whole-genome microarray profiling suggested alterations in metabolic pathways. Further genetic expression analysis revealed downregulation of the RNA chaperone Hfq, which parallels low-fluid-shear responses of certain Gram-negative organisms. This is the first study to report an Hfq association with fluid shear in a Gram-positive organism, suggesting an evolutionarily conserved response to fluid shear among structurally diverse prokaryotes. Collectively, our results suggest S. aureus responds to a low-fluid-shear environment by initiating a biofilm/colonization phenotype with diminished virulence characteristics, which could lead to insight into key factors influencing the divergence between infection and colonization during the initial host-pathogen interaction.

Methicillin resistant Staphylococcus aureus adhesion to human umbilical vein endothelial cells demonstrates wall shear stress dependent behaviour

Background

Methicillin-resistant Staphylococcus aureus (MRSA) is an increasingly prevalent pathogen capable of causing severe vascular infections. The goal of this work was to investigate the role of shear stress in early adhesion events.

Methods

Human umbilical vein endothelial cells (HUVEC) were exposed to MRSA for 15-60 minutes and shear stresses of 0-1.2 Pa in a parallel plate flow chamber system. Confocal microscopy stacks were captured and analyzed to assess the number of MRSA. Flow chamber parameters were validated using micro-particle image velocimetry (PIV) and computational fluid dynamics modelling (CFD).

Results

Under static conditions, MRSA adhered to, and were internalized by, more than 80% of HUVEC at 15 minutes, and almost 100% of the cells at 1 hour. At 30 minutes, there was no change in the percent HUVEC infected between static and low flow (0.24 Pa), but a 15% decrease was seen at 1.2 Pa. The average number of MRSA per HUVEC decreased 22% between static and 0.24 Pa, and 37% between 0.24 Pa and 1.2 Pa. However, when corrected for changes in bacterial concentration near the surface due to flow, bacteria per area was shown to increase at 0.24 Pa compared to static, with a subsequent decline at 1.2 Pa.

Conclusions

This study demonstrates that MRSA adhesion to endothelial cells is strongly influenced by flow conditions and time, and that MSRA adhere in greater numbers to regions of low shear stress. These areas are common in arterial bifurcations, locations also susceptible to generation of atherosclerosis.

Colloidal and bacterial deposition: role of gravity

The role of gravitational force on the deposition of 0.5, 1.1, and 1.8 mum carboxylate-modified polystyrene latex (CML) microspheres and bacterium Burkholderia cepacia G4g has been evaluated using a parallel plate flow chamber system. This experimental system utilized an inverted and an upright optical microscope attached with image-capturing devices to directly observe and determine the deposition kinetics onto glass surfaces located at the top and bottom of the flow chamber. Deposition kinetics was quantified at 10 mM KCl under electrostatically unfavorable and favorable attachment conditions and at two flow rates (0.06 and 3 mL/min), simulating the range of flow velocities from groundwater to rapid granular filtration. Comparing the particle deposition kinetics on the top and bottom surfaces under identical flowing exposure time, fluid chemistries, and hydrodynamic conditions, results showed that significant differences were observed between the two surfaces, suggesting that gravity was a significant driving force for the initial stages of deposition of particles that were larger than 1 mum size. Simulation results utilizing a particle trajectory model confirmed these experimental observations. This was further supported by additional deposition experiments with 1.1 mum microspheres suspended in a deuterium oxide (D(2)O)/water mixture (heavy water) where the density of colloid and the suspending heavy water were effectively the same. Under this condition, deposition rates were observed to be identical between the top and bottom surfaces. Results from normal and heavy water solutions indicated that the greater deposition of colloidal particles larger than 1 mum on the bottom in normal water solutions is due to gravity. Finally, the experimental results were compared with deposition studies using smaller 0.5 mum colloids as well as some theoretical calculations of expected rates of particle deposition.

Measurement of adhesion under flow conditions

This unit describes the analysis of dynamic cell adhesion using a flow chamber assay. The flow chamber enables the researcher to reconstruct cell systems in the presence of shear stress to assay adhesion under well&defined forces. These assays are most commonly used to study leukocyte adhesion, either to cultured endothelial cell monolayers or to purified substrates, simulating physiological interactions of leukocytes with endothelial cells. This assay can be also be used to characterize transient adhesive events or adhesion strengthening even for cells that do not normally experience shear stress, because contact time between cells and substrates and anti&adhesive forces can be closely regulated by stopping and starting the flow. Flow chamber assays are also useful for measuring bacterial adhesion under flow.

Forces involved in bacterial adhesion to hydrophilic and hydrophobic surfaces

Using a parallel-plate flow chamber, the hydrodynamic shear forces to prevent bacterial adhesion (F(prev)) and to detach adhering bacteria (F(det)) were evaluated for hydrophilic glass, hydrophobic, dimethyldichlorosilane (DDS)-coated glass and six different bacterial strains, in order to test the following three hypotheses. 1. A strong hydrodynamic shear force to prevent adhesion relates to a strong hydrodynamic shear force to detach an adhering organism. 2. A weak hydrodynamic shear force to detach adhering bacteria implies that more bacteria will be stimulated to detach by passing an air-liquid interface (an air bubble) through the flow chamber. 3. DLVO (Derjaguin, Landau, Verwey, Overbeek) interactions determine the characteristic hydrodynamic shear forces to prevent adhesion and to detach adhering micro-organisms as well as the detachment induced by a passing air-liquid interface. F(prev) varied from 0.03 to 0.70 pN, while F(det) varied from 0.31 to over 19.64 pN, suggesting that after initial contact, strengthening of the bond occurs. Generally, it was more difficult to detach bacteria from DDS-coated glass than from hydrophilic glass, which was confirmed by air bubble detachment studies. Calculated attractive forces based on the DLVO theory (F(DLVO)) towards the secondary interaction minimum were higher on glass than on DDS-coated glass. In general, all three hypotheses had to be rejected, showing that it is important to distinguish between forces acting parallel (hydrodynamic shear) and perpendicular (DLVO, air-liquid interface passages) to the substratum surface.

Hydrodynamic crossover in dynamic microparticle adhesion on surfaces of controlled nanoscale heterogeneity

This note documents the crossover from a regime where shear flow hinders microparticle adhesion on collecting surfaces to that where increased flow aids particle capture. Flow generally works against adhesion and successfully hinders particle capture when the net physicochemical attractions between the particles and collector are weak compared with hydrodynamic forces on the particle. Conversely, with strong attractions between particles and collector, flow aids particle capture by increasing the mass transport of particles to the interfacial region. Here, local hydrodynamics still generally oppose adhesion but are insufficient to pull particles off of the surface. Thus, flow actually increases the particle capture rate through the increased transport to the surface. These behaviors are demonstrated using 1 mum silica spheres flowing over electrostatically heterogeneous (length scales near 10 nm) collecting surfaces at shear rates from 22 to 795 s(-1). The net surface charge on the collector is varied systematically from strongly negative (pure silica) to strongly positive (a saturated polycationic overlayer), demonstrating the interplay between physicochemical and hydrodynamic contributions. These results clearly apply to situations where heterogeneous particle-surface interactions are electrostatic in nature; however, qualitatively similar behavior was previously reported for the effect receptor density on bacterial adhesion.

Measurement of adhesion under flow conditions

This unit describes the analysis of dynamic cell adhesion using a flow chamber assay. The flow chamber enables the researcher to reconstruct cell systems in the presence of shear stress to assay adhesion under well&defined forces. These assays are most commonly used to study leukocyte adhesion, either to cultured endothelial cell monolayers or to purified substrates, simulating physiological interactions of leukocytes with endothelial cells. This assay can be also be used to characterize transient adhesive events or adhesion strengthening even for cells that do not normally experience shear stress, because contact time between cells and substrates and anti&adhesive forces can be closely regulated by stopping and starting the flow. Flow chamber assays are also useful for measuring bacterial adhesion under flow.

Sex and flow: the consequences of fluid shear for sperm–egg interactions

Fertilization is a complex interaction among biological traits of gametes and physical properties of the fluid environment. At the scale of fertilization (0.01–1 mm), sperm encounter eggs while being transported within a laminar (or viscous) shear flow. Varying laminar-shear in a Taylor-Couette flow tank, our experiments simulated important aspects of small-scale turbulence within the natural habitats of red abalone(Haliotis rufescens), a large marine mollusk and external fertilizer. Behavioral interactions between individual cells, sperm–egg encounter rates, and fertilization success were quantified, simultaneously, using a custom-built infrared laser and computer-assisted video imaging system. Relative to still water, sperm swam faster and moved towards an egg surface,but only in comparatively slow flows. Encounter rate, swim speed and orientation, and fertilization success each peaked at the lowest shear tested(0.1 s–1), and then decayed as shear increased beyond 1.0 s–1. The decay did not result, however, from damage to either sperm or eggs. Analytical and numerical models were used to estimate the propulsive force generated by sperm swimming (Fswim) and the shear force produced by fluid motion within the vicinity of a rotating egg(Fshear). To first order, male gametes were modeled as prolate spheroids. The ratio Fswim/Fshear was useful in explaining sperm–egg interactions. At low shears where Fswim/Fshear&gt;1, sperm swam towards eggs, encounter rates were pronounced, and fertilization success was very high; behavior overpowered fluid motion. In contrast, sperm swimming,encounter rate and fertilization success all decayed rapidly when Fswim/Fshear&lt;1; fluid motion dominated behavior. The shears maximizing fertilization success in the lab typically characterized natural flow microenvironments of spawning red abalone. Gamete behavior thus emerges as a critical determinant of sexual reproduction in the turbulent sea.

Erosion from Staphylococcus aureus biofilms grown under physiologically relevant fluid shear forces yields bacterial cells with reduced avidity to collagen

An estimated 65% of infective diseases are associated with the presence of bacterial biofilms. Biofilm-issued planktonic cells promote blood-borne, secondary sites of infection by the inoculation of the infected sites with bacteria from the intravascular space. To investigate the potential role of early detachment events in initiating secondary infections, we studied the phenotypic attributes of Staphylococcus aureus planktonic cells eroding from biofilms with respect to expression of the collagen adhesin, CNA. The collagen-binding abilities of S. aureus have been correlated to the development of osteomyelitis and septic arthritis. In this study, we focused on the impact of CNA expression on S. aureus adhesion to immobilized collagen in vitro under physiologically relevant shear forces. In contrast to the growth phase-dependent adhesion properties characteristic of S. aureus cells grown in suspension, eroding planktonic cells expressed invariant and lower effective adhesion rates regardless of the age of the biofilm from which they originated. These results correlated directly with the surface expression level of CNA. However, subsequent analysis revealed no qualitative differences between biofilms initiated with suspension cells and secondary biofilms initiated with biofilm-shed planktonic cells. Taken together, our findings suggest that, despite their low levels of CNA expression, S. aureus planktonic cells shed from biofilms retain the capacity for metastatic spread and the initiation of secondary infection. These findings demonstrate the need for a better understanding of the phenotypic properties of eroding planktonic cells, which could lead to new therapeutic strategies to target secondary infections.

Surface plasmon resonance shows that type IV pili are important in surface attachment by Pseudomonas aeruginosa

Type IV pili have been shown to play a role in the early stages of bacterial biofilm formation, but not in initial bacterial attachment. Here, using the surface analytical technique, surface plasmon resonance (SPR), we follow the attachment of the bacterium Pseudomonas aeruginosa in real time. In contrast to previous studies, we show that type IV pili mutants are defective in attachment. Both mutants lacking pili (pilA), and those possessing an overabundance of pili (pilT), showed reduced SPR measured attachment compared with the wild-type PAO1 strain. Both pil mutants also showed reduced pathogenicity in a model insect host, as measured by percentage mortality after 24h. SPR revealed differences in the kinetics of attachment between pilA and pilT, differences obscured by endpoint assays using crystal violet stain. These results highlight the power of SPR in monitoring bacterial attachment in real time and also demonstrate an additional role for type IV pili beyond bacterial aggregation and micro-colony formation.

Adhesion of slime producing Staphylococcus epidermidis strains to PVC and diamond-like carbon/silver/fluorinated coatings

Staphylococcus epidermidis has emerged as a pathogen associated with infections of implanted medical devices. Bacterial adhesion is a crucial step in infection on biomaterial surfaces. To quantitatively determine the relationship between poly (vinyl chloride) (PVC) surface properties and bacterial adhesion, we have compared attachment of slime-producing S. epidermidis strains on PVC and various coatings under flow conditions. Bacterial adhesion and colonization was quantified by counting the viable organisms on the adherent surface as well as by scanning electron microscopy, epifluorescence microscopy and atomic force microscopy. Fluorination of the PVC surface encourages S. epidermidis adhesion whereas; diamond-like carbon (DLC) and especially silver (Ag) coatings seem to inhibit its adhesion. In most materials, the number of adherent bacteria decreased with the increase of shear rate. These results indicate that bacterial adhesion is influenced by the chemical properties of the polymeric surfaces, the surface roughness and the associated flow conditions.

Microbial adhesion in flow displacement systems

Flow displacement systems are superior to many other (static) systems for studying microbial adhesion to surfaces because mass transport and prevailing shear conditions can be adequately controlled and notoriously ill-defined slight rinsing steps to remove so-called "loosely adhering organisms" can be avoided. In this review, we present the basic background required to calculate mass transport and shear rates in flow displacement systems, focusing on the parallel plate flow chamber as an example. Critical features in the design of flow displacement systems are discussed, as well as different strategies for data analysis. Finally, selected examples of working with flow displacement systems are given for diverse biomedical applications.

Catch-bond model derived from allostery explains force-activated bacterial adhesion

High shear enhances the adhesion of Escherichia coli bacteria binding to mannose coated surfaces via the adhesin FimH, raising the question as to whether FimH forms catch bonds that are stronger under tensile mechanical force. Here, we study the length of time that E. coli pause on mannosylated surfaces and report a double exponential decay in the duration of the pauses. This double exponential decay is unlike previous single molecule or whole cell data for other catch bonds, and indicates the existence of two distinct conformational states. We present a mathematical model, derived from the common notion of chemical allostery, which describes the lifetime of a catch bond in which mechanical force regulates the transitions between two conformational states that have different unbinding rates. The model explains these characteristics of the data: a double exponential decay, an increase in both the likelihood and lifetime of the high-binding state with shear stress, and a biphasic effect of force on detachment rates. The model parameters estimated from the data are consistent with the force-induced structural changes shown earlier in FimH. This strongly suggests that FimH forms allosteric catch bonds. The model advances our understanding of both catch bonds and the role of allostery in regulating protein activity.

Influence of shear on microbial adhesion to PEO-brushes and glass by convective-diffusion and sedimentation in a parallel plate flow chamber

Microbial adhesion to surfaces often occurs despite high wall shear rates acting on the adhering microorganisms. In this paper, we compare the wall shear rates needed to prevent microbial adhesion to bare glass and poly(ethylene oxide) (PEO)-brush coated glass in a parallel plate flow chamber. Initial microbial deposition rates were determined for different wall shear rates between 4 and 1600 s(-1) on the top and bottom plates of the flow chamber. Deposition efficiencies alpha(SL), based on the Smoluchowski-Levich approach, for Pseudomonas aeruginosa D1, Escherichia coli O2K2 and Candida tropicalis GB 9/9 decreased with increasing wall shear rates and were lower for PEO-brush coated glass than for bare glass. Characteristic shear rates preventing adhesion to the bottom plate were around 10 and 1.0 s(-1) for the bacteria on glass and the PEO-brush and 36 and 3.4s(-1) for the yeast strain on glass and the PEO-brush, respectively. This demonstrates that the adhesive forces between microorganisms and a PEO-brush are comparatively weak, although some strains may have the ability to adhere to a PEO-brush under low shear conditions. Microbial deposition efficiencies alpha(SL) were much larger, however, than unity for bottom plate deposition, but could be reduced to realistic values by averaging the deposition rates found for the top (negative contribution of sedimentation) and bottom (positive contribution of sedimentation) plates.

Shear-dependent 'stick-and-roll' adhesion of type 1 fimbriated Escherichia coli

It is generally assumed that bacteria are washed off surfaces as fluid flow increases because they adhere through 'slip-bonds' that weaken under mechanical force. However, we show here that the opposite is true for Escherichia coli attachment to monomannose-coated surfaces via the type 1 fimbrial adhesive subunit, FimH. Raising the shear stress (within the physiologically relevant range) increased accumulation of type 1 fimbriated bacteria on monomannose surfaces by up to two orders of magnitude, and reducing the shear stress caused them to detach. In contrast, bacterial binding to anti-FimH antibody-coated surfaces showed essentially the opposite behaviour, detaching when the shear stress was increased. These results can be explained if FimH is force-activated; that is, that FimH mediates 'catch-bonds' with mannose that are strengthened by tensile mechanical force. As a result, on monomannose-coated surfaces, bacteria displayed a complex 'stick-and-roll' adhesion in which they tended to roll over the surface at low shear but increasingly halted to stick firmly as the shear was increased. Mutations in FimH that were predicted earlier to increase or decrease force-induced conformational changes in FimH were furthermore shown here to increase or decrease the probability that bacteria exhibited the stationary versus the rolling mode of adhesion. This 'stick-and-roll' adhesion could allow type 1 fimbriated bacteria to move along mannosylated surfaces under relatively low flow conditions and to accumulate preferentially in high shear regions.

Characterization of a protective monoclonal antibody recognizing Staphylococcus aureus MSCRAMM protein clumping factor A

The Staphylococcus aureus MSCRAMM (microbial surface components recognizing adhesive matrix molecules) protein clumping factor A (ClfA) has been shown to be a critical virulence factor in several experimental models of infection. This report describes the generation, characterization, and in vivo evaluation of a murine monoclonal antibody (MAb) against ClfA. Flow cytometric analysis revealed that MAb 12-9 recognized ClfA protein expressed by all of the clinical S. aureus strains obtained from a variety of sources. In assays measuring whole-cell S. aureus binding to human fibrinogen, MAb 12-9 inhibited S. aureus binding by over 90% and displaced up to 35% of the previously adherent S. aureus bacteria. Furthermore, a single infusion of MAb 12-9 was protective against an intravenous challenge with a methicillin-resistant strain of S. aureus in a murine sepsis model (P < 0.0001). These data suggest that anti-ClfA MAb 12-9 should be further investigated as a novel immunotherapy for the treatment and prevention of life-threatening S. aureus infections.

Fluid shear contributions to bacteria cell detachment initiated by a monoclonal antibody

Receptor-mediated adhesion of bacteria to biological surfaces is a significant step leading to infection. Due to an increase in bacterial antibiotic resistance, novel methods to block and disrupt these specific interactions have gained considerable interest as possible therapeutic strategies. Recently, several monoclonal antibodies specific for the Staphylococcus aureus collagen receptor demonstrated specialized ability to displace attached cells from collagen in static assays. In this study, we experimentally examine the monoclonal antibody detachment functionality under physiological shear conditions to evaluate the role of this parameter in the detachment process. The detachment of staphylococci from collagen was quantified in real-time using a parallel plate flow chamber, phase contrast video-microscopy and digital image processing. The results demonstrate a unimodal dependence of detachment on fluid wall shear rate. The observed decrease in effective detachment rate with increasing force at the highest shear levels evaluated is counterintuitive and has not been previously demonstrated. Several possible mechanisms of this result are discussed.

Measurement of adhesive forces between S. epidermidis and fibronectin-coated surfaces using optical tweezers

BACKGROUND AND OBJECTIVES

Biomaterial-mediated infection, a common cause of medical device failure, is initiated by bacterial adhesion to an adsorbed protein layer on the implant surface. This adhesion is thought to be mediated by specific molecules present on the bacterial cell surface. Optical tweezers can be used to measure the adhesive force between a single bacterium and a protein-coated surface.

STUDY DESIGN/MATERIALS AND METHODS

Using optical tweezers, a bacterium was trapped and brought in contact with a 10-microm diameter polystyrene microsphere coated with fibronectin. The minimum force required to detach the cell from the bead was determined over a range of fibronectin concentrations and contact times.

RESULTS

The detachment forces were integer multiples of an 18-pN base value that was independent of contact time and coating concentration; we propose that the variation in force is related to the number of bonds formed.

CONCLUSIONS

These experiments demonstrate that optical tweezers can be used to investigate the adhesion of individual bacteria to surfaces. The results suggest that S. epidermidis has surface proteins capable of binding fibronectin.

Bacterial adhesion to target cells enhanced by shear force

Surface adhesion of bacteria generally occurs in the presence of shear stress, and the lifetime of receptor bonds is expected to be shortened in the presence of external force. However, by using Escherichia coli expressing the lectin-like adhesin FimH and guinea pig erythrocytes in flow chamber experiments, we show that bacterial attachment to target cells switches from loose to firm upon a 10-fold increase in shear stress applied. Steered molecular dynamics simulations of tertiary structure of the FimH receptor binding domain and subsequent site-directed mutagenesis studies indicate that shear-enhancement of the FimH-receptor interactions involves extension of the interdomain linker chain under mechanical force. The ability of FimH to function as a force sensor provides a molecular mechanism for discrimination between surface-exposed and soluble receptor molecules.

Characterizing the adhesion of motile and nonmotile Escherichia coli to a glass surface using a parallel-plate flow chamber

A parallel-plate flow chamber was used to measure the attachment and detachment rates of Escherichia coli to a glass surface at various fluid velocities. The effect of flagella on adhesion was investigated by performing experiments with several E. coli strains: AW405 (motile); HCB136 (nonmotile mutant with paralyzed flagella); and HCB137 (nonmotile mutant without flagella). We compared the total attachment rates and the fraction of bacteria retained on the surface to determine how the presence and movement of the flagella influence transport to the surface and adhesion strength in this dynamic system. At the lower fluid velocities, there was no significant difference in the total attachment rates for the three bacterial strains; nonmotile strains settled at a rate that was of the same order of magnitude as the diffusion rate of the motile strain. At the highest fluid velocity, the effect of settling was minimized to better illustrate the importance of motility, and the attachment rates of both nonmotile strains were approximately five times slower than that of the motile bacteria. Thus, different processes controlled the attachment rate depending on the parameter regime in which the experiment was performed. The fractions of motile bacteria retained on the glass surface increased with increasing velocity, whereas the opposite trend was found for the nonmotile strains. This suggests that the rotation of the flagella enables cells to detach from the surface (at the lower fluid velocities) and strengthens adhesion (at higher fluid velocities), whereas nonmotile cells detach as a result of shear. There was no significant difference in the initial attachment rates of the two nonmotile species, which suggests that merely the presence of flagella was not important in this stage of biofilm development.

Quantifying the temporal expression of the Staphylococcus aureus collagen adhesin

The initial event in the pathogeneis of most Staphylococcus aureus infections is attachment to biological substrates in vivo using specific protein-protein interactions. We previously quantified the temporal expression of the collagen adhesin (CNA) on S. aureus Phillips and demonstrated that dynamic adhesin capacity to collagen is strongly influenced by the adhesin density. However, most strains of S. aureus express an extensive amount of Protein A on the surface, presenting a complication when using immunofluorescence to quantify specific surface adhesins. In this study, an improved adhesin quantification method is presented that accommodates variable surface Protein A levels. This method was used to examine the temporal expression of CNA on six S. aureus strains. Collagen adhesin levels varied with growth phase and strain, ranging from 1096 to 8950 copies per cell. Five of the six strains exhibited a temporal expression pattern similar to that previously reported for S. aureus Phillips.

Glycolipids support E-selectin-specific strong cell tethering under flow

This study provides functional evidence that glycosphingolipids constitute ligands for E-selectin but not P-selectin. Chinese hamster ovary (CHO) cells expressing E-selectin (CHO-E) or P-selectin (CHO-P) were perfused over alpha2,3-sialyl Lewis X (alpha2,3-sLe(x)) presented as the hexaosylceramide glycosphingolipid adsorbed in a monolayer containing phosphatidylcholine and cholesterol. CHO-E cells tethered extensively and formed slow, stable rolling interactions with alpha2,3-sLe(x) glycosphingolipid but not with the comparable alpha2,6-sLe(x) glycosphingolipid. Tethering/rolling varied with wall shear stress, selectin density, and ligand density. In contrast, alpha2,3-sLe(x) glycosphingolipid supported only limited, fast CHO-P cell rolling. As calculated from a stochastic model of cell rolling, the step size between successive bond releases from the alpha2,3-sLe(x) glycosphingolipid was smaller for CHO-E than CHO-P cells, whereas the opposite effect was observed for the waiting time between these events. Detachment assays revealed stronger adhesive interactions of CHO-E than CHO-P cells with alpha2,3-sLe(x) glycosphingolipid. These findings indicate that glycosphingolipids expressing an appropriate oligosaccharide mediate cell tethering/rolling via E-selectin but not P-selectin.

Shear stress prevents fibronectin binding protein-mediated Staphylococcus aureus adhesion to resting endothelial cells

Fibronectin binding proteins (FnBP) on the surface of Staphylococcus aureus have previously been shown to mediate adherence of the organism to resting endothelial cells in static adhesion assays. However, in this study using well-defined flow assays, we demonstrate that physiologic levels of shear stress prevent FnBP-mediated adhesion of S. aureus 8325-4 to resting endothelial cells. This result suggests that mechanical forces present in vivo may influence the ability of staphylococci to bind endothelial cell surfaces.