Migration of metal and polyethylene particles from articular prostheses may generate lymphadenopathy with histiocytosis

Radiographic and CT features of metallosis in a lame dog after total hip replacement: the cloud sign

A 2-year-old female American Akita was referred for CT of the pelvis and hindlimbs due to a left hindlimb lameness after a left total hip replacement. Referral radiographs and CT images demonstrated amorphous soft-tissue and mineral opacities surrounding the proximal femur and the prosthetic stem, consistent with the "cloud sign" reported as a characteristic of metallosis in humans. Dorsomedial displacement of the prosthetic head, multiple foci of geographic osteolysis alongside the "cloud sign", presumed pseudotumor lesions, and medial iliac lymphadenopathy were also identified with CT. Metallosis was confirmed based on ultrasound-guided cytology, revision surgery, and histopathology.

Histochemical identification of wear debris released by alumina-on-alumina hip prostheses in the periprosthetic tissues

BACKGROUND

Tribological studies have shown that the most used couples for hip prostheses consist of metal-on-polyethylene and alumina-on-alumina prostheses. Over time, wear products accumulate in the joint cavity and in the periprosthetic tissues. Although polyethylene and metal are easily identifiable by microscopy in periprosthetic tissues, alumina particles are very difficult to identify.

HYPOTHESIS

The fluorescent azo-dye lumogallion was evaluated as a suitable histochemical stain for alumina particles in periprosthetic tissues.

MATERIAL AND METHOD

In 28 patients who had a prosthetic revision of an alumina-on-alumina prosthesis, periprosthetic tissues were removed and embedded in paraffin; sections were stained with HPS (for conventional diagnosis) or with lumogallion. Sections were examined for wear particles in light and fluorescence microscopy. Some sections were counter-stained using DAPI for visualization of cell nuclei.

RESULTS

The wear particles of the alumina-alumina prostheses were very difficult to identify on the HPS stained sections; they were clearly evidenced by lumogallion staining with a bright orange fluorescence. The stain revealed large quantities of particles (of the order of several thousand per section). Only two patients had no particles. The staining technique identified numerous particles that were not visible on HPS-stained sections in macrophages, synoviocytes and fibroblasts.

CONCLUSION

This staining, which has been validated in neuromuscular pathology for the identification of alumina used as a vaccine adjuvant, gave successful results in the present study. Alumina particles are modified when they are phagocytized by macrophages. lumogallion staining easily shows the presence of thousands of wear particles released by alumina-on-alumina prostheses in periprosthetic tissues.

LEVEL OF EVIDENCE

V expert opinion study.

Polyhydroxyalkanoate (PHBV) fibers obtained by a wet spinning method: Good in vitro cytocompatibility but absence of in vivo biocompatibility when used as a bone graft

Polyhydroxyalkanoates (PHAs) are biomaterials widely investigated for tissue-engineering applications. In this regard, we describe a method to prepare fibers of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) by a wet-spinning technique. Polymer fibers were used to test the cytocompatibility of the material in vitro. We have investigated their behavior in vitro in presence of the osteoblast-like (SaOs2) and macrophage (J774.2) cell lines. The PHBV fibers used were 100-200μm in diameter and offered a large surface for cell adhesion, similar to that they encounter when apposed onto a bone trabeculae. The fiber surface possessed a suitable roughness, a factor known to favor the adherence of cells, particularly osteoblasts. PHBV fibers were degraded in vitro by J774.2 cells as erosion pits were observable by transmission electron microscopy. The fibers were also colonisable by SaOs2 cells, which can spread and develop onto their surface. However, despite this good cytocompatibility observed in vitro, implantation in a bone defect drilled in rabbit femoral condyles showed that the material was only biotolerated without any sign of osteoconduction or degradation in vivo. We can conclude that PHBV is cytocompatible but is not suitable to be used as a bone graft as it does not favor osteoconduction and is not resorbed by bone marrow macrophages.

Retroperitoneal lymphadenopathy secondary to joint replacement wear and debris, a case report

We present a case of a 63-year-old female who initially presented with complaints of vulvar swelling and was subsequently found to have isolated retroperitoneal lymphadenopathy on imaging. Biopsy was performed and was indicative of weakly polarizable material that raised the consideration of joint prosthesis wear debris. Due to the patient's concern for an underlying malignancy of gynecologic origin, a laparoscopic lymphadenectomy was ultimately performed and final pathology was consistent with reactive changes due to joint wear and debris from the patient's bilateral total knee arthroplasties placed approximately 16 years prior. While this is a rare presentation, it is important to consider this in the differential of retroperitoneal lymphadenopathy as these patients are often referred to a gynecologic oncologist for further workup.

•

Lymphadenopathy due to joint wear and debris from arthroplasty is a rare finding.

•

While the differential is broad, it should include this etiology.

•

Gynecologic oncologists should be aware of this finding and manage accordingly.

Non-neoplastic histiocytic and dendritic cell disorders in lymph nodes

Benign and malignant proliferations of histiocytes and dendritic cells may be encountered in lymph nodes. Reactive histiocytic and dendritic cell infiltrates occur in response to diverse stimuli and in addition to causing lymphadenopathy, may be present unexpectedly in lymph nodes excised for other indications. This review summarizes the pathogenesis and histopathological features of the various non-neoplastic histiocytic and dendritic cell infiltrates that can occur in lymph nodes.

Modularity in Total Hip Arthroplasty: Benefits, Risks, Mechanisms, Diagnosis, and Management

Modular implants are currently widely used in total hip arthroplasty because they give surgeons versatility during the operation, allow for easier revision surgery, and can be adjusted to better fit the anatomy of the specific patient. However, modular implants, specifically those that have metal-on-metal junctions, are susceptible to crevice and fretting corrosion. This can ultimately cause implant failure, inflammation, and adverse local tissue reaction, among other possible side effects. Surgeons should be aware of the possibility of implant corrosion and should follow a set of recommended guidelines to systematically diagnose and treat patients with corroded implants. Ultimately, surgeons will continue to use modular implants because of their widespread benefits. However, more research is needed to determine how to minimize corrosion and the negative side effects that have been associated with modular junctions in total hip arthroplasty. [Orthopedics. 2017; 40(6):355-366.].

Maxillary Sinus Lift with Beta-Tricalcium Phosphate (β-TCP) in Edentulous Patients: A Nanotomographic and Raman Study

Sinus lift elevation restores bone mass at the maxilla in edentulate patients before the placement of dental implants. It consists of opening the lateral side of the sinus and grafting beta-tricalcium phosphate granules (β-TCP) under the olfactory membrane. Bone biopsies were obtained in five patients after 60 weeks. They were embedded undecalcified in poly(methyl methacrylate) (pMMA); blocks were analyzed by nanocomputed tomography (nanoCT); specific areas were studied by Raman microspectroscopy. Remnants of β-TCP were osseointegrated and covered with mineralized bone; osteoid tissue was also filling the inner porosity. Macrophages having engulfed numerous β-TCP grains were observed in marrow spaces. β-TCP was identified by nanoCT as osseointegrated particles and as granules in the cytoplasm of macrophages. Raman microspectroscopy permitted to compare the spectra of β-TCP and bone in different areas. The ratio of the ~820 cm^-1 band of pMMA (-CH₂ groups) on the ν1 phosphate band at 960 cm^-1 reflected tissue hydration because water was substituted by MMA during histological processing. In bone, the ratio of the ~960 cm^-1 phosphate to the amide 1 band and the ratio ν2 phosphate band by the 1240-1250 amide III band reflect the mineralization degree. Specific bands of β-TCP were found in osseointegrated β-TCP granules and in the grains phagocytized by the macrophages. The hydration degree was maximal for β-TCP phagocytized by macrophages. Raman microspectroscopy associated with nanoCT is a powerful tool in the analysis of the biomaterial degradation and osseointegration.

Wear products of total hip arthroplasty: The case of polyethylene

Among the bearing surfaces involved in a total hip arthroplasty, ultra-high molecular weight polyethylene (UHMWPE) is the weak link. It is submitted to the friction of a harder bearing, producing wear particles, which, in turn, initiate an inflammatory reaction ultimately leading to osteolysis. This kind of bone deterioration sometimes turns out to an aggressive granuloma and may provoke implant loosening. Wear resistance of UHMWPE depends on its molecular weight and crystallinity. Some steps of the manufacturing process were improved to optimize its tribological properties and to slow down degradation resulting from mechanical (abrasion) and chemical (oxidation) phenomena. Its preparation and conservation must be performed in an inert atmosphere, i.e. without ambient oxygen. Its resistance to abrasion depends on its cross-linking degree. Its cross-linking rate was observed to increase proportionally to the irradiation doses, improving its wear resistance. However, its mechanical properties are impaired and moreover, it becomes oxidation sensitive. It is therefore necessary to submit it to a thermal treatment to eliminate free radicals that were produced during irradiation. More recently impregnation by vitamin E, a powerful anti-oxidant product, was proposed to preserve the polymer from in vivo oxidation while maintaining its mechanical properties. We raised the hypothesis that last-generation UHMWPE could offer the same wear resistance as the most performing bearings (ceramic-on-ceramic). Recent clinical results confirm the tribological performance of highly crosslinked UHMWPE in vivo. However, it remains to be seen whether this excellent wear resistance would persist under eccentric load such as edge loading, and if, in the long run, this kind of bearing proves capable of reducing the risk of osteolysis in young and active patients.

Total hip replacement and surface replacement for the treatment of pain and disability resulting from end-stage arthritis of the hip (review of technology appraisal guidance 2 and 44): systematic review and economic evaluation

BACKGROUND

Total hip replacement (THR) involves the replacement of a damaged hip joint with an artificial hip prosthesis. Resurfacing arthroplasty (RS) involves replacement of the joint surface of the femoral head with a metal surface covering.

OBJECTIVES

To undertake clinical effectiveness and cost-effectiveness analysis of different types of THR and RS for the treatment of pain and disability in people with end-stage arthritis of the hip, in particular to compare the clinical effectiveness and cost-effectiveness of (1) different types of primary THR and RS for people in whom both procedures are suitable and (2) different types of primary THR for people who are not suitable for hip RS.

DATA SOURCES

Electronic databases including MEDLINE, EMBASE, The Cochrane Library, Current Controlled Trials and UK Clinical Research Network (UKCRN) Portfolio Database were searched in December 2012, with searches limited to publications from 2008 and sample sizes of ≥ 100 participants. Reference lists and websites of manufacturers and professional organisations were also screened.

REVIEW METHODS

Systematic reviews of the literature were undertaken to appraise the clinical effectiveness and cost-effectiveness of different types of THR and RS for people with end-stage arthritis of the hip. Included randomised controlled trials (RCTs) and systematic reviews were data extracted and risk of bias and methodological quality were independently assessed by two reviewers using the Cochrane Collaboration risk of bias tool and the Assessment of Multiple Systematic Reviews (AMSTAR) tool. A Markov multistate model was developed for the economic evaluation of the technologies. Sensitivity analyses stratified by sex and controlled for age were carried out to assess the robustness of the results.

RESULTS

A total of 2469 records were screened of which 37 were included, representing 16 RCTs and eight systematic reviews. The mean post-THR Harris Hip Score measured at different follow-up times (from 6 months to 10 years) did not differ between THR groups, including between cross-linked polyethylene and traditional polyethylene cup liners (pooled mean difference 2.29, 95% confidence interval -0.88 to 5.45). Five systematic reviews reported evidence on different types of THR (cemented vs. cementless cup fixation and implant articulation materials) but these reviews were inconclusive. Eleven cost-effectiveness studies were included; four provided relevant cost and utility data for the model. Thirty registry studies were included, with no studies reporting better implant survival for RS than for all types of THR. For all analyses, mean costs for RS were higher than those for THR and mean quality-adjusted life-years (QALYs) were lower. The incremental cost-effectiveness ratio for RS was dominated by THR, that is, THR was cheaper and more effective than RS (for a lifetime horizon in the base-case analysis, the incremental cost of RS was £11,284 and the incremental QALYs were -0.0879). For all age and sex groups RS remained clearly dominated by THR. Cost-effectiveness acceptability curves showed that, for all patients, THR was almost 100% cost-effective at any willingness-to-pay level. There were age and sex differences in the populations with different types of THR and variations in revision rates (from 1.6% to 3.5% at 9 years). For the base-case analysis, for all age and sex groups and a lifetime horizon, mean costs for category E (cemented components with a polyethylene-on-ceramic articulation) were slightly lower and mean QALYs for category E were slightly higher than those for all other THR categories in both deterministic and probabilistic analyses. Hence, category E dominated the other four categories. Sensitivity analysis using an age- and sex-adjusted log-normal model demonstrated that, over a lifetime horizon and at a willingness-to-pay threshold of £20,000 per QALY, categories A and E were equally likely (50%) to be cost-effective.

LIMITATIONS

A large proportion of the included studies were inconclusive because of poor reporting, missing data, inconsistent results and/or great uncertainty in the treatment effect estimates. This warrants cautious interpretation of the findings. The evidence on complications was scarce, which may be because of the absence or rarity of these events or because of under-reporting. The poor reporting meant that it was not possible to explore contextual factors that might have influenced study results and also reduced the applicability of the findings to routine clinical practice in the UK. The scope of the review was limited to evidence published in English in 2008 or later, which could be interpreted as a weakness; however, systematic reviews would provide summary evidence for studies published before 2008.

CONCLUSIONS

Compared with THR, revision rates for RS were higher, mean costs for RS were higher and mean QALYs gained were lower; RS was dominated by THR. Similar results were obtained in the deterministic and probabilistic analyses and for all age and sex groups THR was almost 100% cost-effective at any willingness-to-pay level. Revision rates for all types of THR were low. Category A THR (cemented components with a polyethylene-on-metal articulation) was more cost-effective for older age groups. However, across all age-sex groups combined, the mean cost for category E THR (cemented components with a polyethylene-on-ceramic articulation) was slightly lower and the mean QALYs gained were slightly higher. Category E therefore dominated the other four categories. Certain types of THR appeared to confer some benefit, including larger femoral head sizes, use of a cemented cup, use of a cross-linked polyethylene cup liner and a ceramic-on-ceramic as opposed to a metal-on-polyethylene articulation. Further RCTs with long-term follow-up are needed.

STUDY REGISTRATION

This study is registered as PROSPERO CRD42013003924.

FUNDING

The National Institute for Health Research Health Technology Assessment programme.

The biological response to nanometre-sized polymer particles

Recently, nanometre-sized UHMWPE particles generated from hip and knee replacements have been identified in vitro and in vivo. UHMWPE particles in the 0.1-1.0μm size range have been shown to be more biologically active than larger particles, provoking an inflammatory response implicated in late aseptic loosening of total joint replacements. The biological activity of nanometre-sized particles has not previously been studied. The biological response to clinically-relevant UHMWPE wear particles including nanometre-sized and micrometre-sized, along with polystyrene particles (FluoSpheres 20nm, 60nm, 200nm and 1.0μm), and nanometre-sized model polyethylene particles (Ceridust 3615®), was determined in terms of osteolytic cytokine release from primary human peripheral blood mononuclear cells (PBMNCs). Nanometre-sized UHMWPE wear particles, nanometre-sized Ceridust 3615® and 20nm FluoSpheres had no significant effect on TNF-α, IL-1β, IL-6 and IL-8 release from PBMNCs at a concentration of 100μm(3) particles per cell after 12 and 24h. The micrometre-size UHMWPE wear particles (0.1-1.0μm) and 60nm, 200nm and 1.0μm FluoSpheres caused significantly elevated osteolytic cytokine release from PBMNCs. These results indicated that particles below circa 50nm fail to activate PBMNCs and that particle size, composition and morphology played a crucial role in cytokine release by particle stimulated macrophages.

Potential release of in vivo trace metals from metallic medical implants in the human body: from ions to nanoparticles--a systematic analytical review

Metal ion release from metallic materials, e.g. metallic alloys and pure metals, implanted into the human body in dental and orthopedic surgery is becoming a major cause for concern. This review briefly provides an overview of both metallic alloys and pure metals used in implant materials in dental and orthopedic surgery. Additionally, a short section is dedicated to important biomaterials and their corrosive behavior in both real solutions and various types of media that model human biological fluids and tissues. The present review gives an overview of analytical methods, techniques and different approaches applied to the measurement of in vivo trace metals released into body fluids and tissues from patients carrying metal-on-metal prostheses and metal dental implants. Reference levels of ion concentrations in body fluids and tissues that have been determined by a host of studies are compiled, reviewed and presented in this paper. Finally, a collection of published clinical data on in vivo released trace metals from metallic medical implants is included.

Generation of a large volume of clinically relevant nanometre-sized ultra-high-molecular-weight polyethylene wear particles for cell culture studies

It has recently been shown that the wear of ultra-high-molecular-weight polyethylene in hip and knee prostheses leads to the generation of nanometre-sized particles, in addition to micron-sized particles. The biological activity of nanometre-sized ultra-high-molecular-weight polyethylene wear particles has not, however, previously been studied due to difficulties in generating sufficient volumes of nanometre-sized ultra-high-molecular-weight polyethylene wear particles suitable for cell culture studies. In this study, wear simulation methods were investigated to generate a large volume of endotoxin-free clinically relevant nanometre-sized ultra-high-molecular-weight polyethylene wear particles. Both single-station and six-station multidirectional pin-on-plate wear simulators were used to generate ultra-high-molecular-weight polyethylene wear particles under sterile and non-sterile conditions. Microbial contamination and endotoxin levels in the lubricants were determined. The results indicated that microbial contamination was absent and endotoxin levels were low and within acceptable limits for the pharmaceutical industry, when a six-station pin-on-plate wear simulator was used to generate ultra-high-molecular-weight polyethylene wear particles in a non-sterile environment. Different pore-sized polycarbonate filters were investigated to isolate nanometre-sized ultra-high-molecular-weight polyethylene wear particles from the wear test lubricants. The use of the filter sequence of 10, 1, 0.1, 0.1 and 0.015 µm pore sizes allowed successful isolation of ultra-high-molecular-weight polyethylene wear particles with a size range of < 100 nm, which was suitable for cell culture studies.

High rate of revision and a high incidence of radiolucent lines around Metasul metal-on-metal total hip replacements: results from a randomised controlled trial of three bearings after seven years

A total of 397 hips were randomised to receive Metasul metal-on-metal (MoM), metal-on-conventional polyethylene (MoP) or ceramic-on-polyethylene (CoP) bearings using a cemented triple-tapered polished femoral component (MS-30). There were 129 MoM hips in 123 patients (39 male and 84 female, mean age 63.3 years (40.7 to 72.9)), 137 MoP hips in 127 patients (39 male and 88 female, mean age 62.8 years (24.5 to 72.7)) and 131 CoP hips in 124 patients (51 male and 73 female, mean age 63.9 years (30.6 to 73.8)). All acetabular components were cemented Weber polyethylene components with the appropriate inlay for the MoM articulation. Clinical evaluation was undertaken using the Harris hip score (HHS) and radiological assessments were made at two, five and seven years. The HHS and radiological analysis were available for 341 hips after seven years. The MoM group had the lowest mean HHS (p = 0.124), a higher rate of revision (p < 0.001) and a higher incidence of radiolucent lines in unrevised hips (p < 0.001). In all, 12 revisions had been performed in 12 patients: eight in the MoM group (four for infection, four for aseptic loosening, three in the MoP group (one each of infection, dislocation and pain) and one in the CoP group (infection). Our findings reveal no advantage to the MoM bearing and identified a higher revision rate and a greater incidence of radiolucent lines than with the other articulations. We recommend that patients with a 28 mm Metasul MoM bearing be followed carefully.

Do tissues from THA revision of highly crosslinked UHMWPE liners contain wear debris and associated inflammation?

BACKGROUND

Polyethylene wear debris is a major contributor to inflammation and the development of implant loosening, a leading cause of THA revisions. To reduce wear debris, highly crosslinked ultrahigh-molecular-weight polyethylene (UHMWPE) was introduced to improve wear properties of bearing surfaces. As highly crosslinked UHMWPE revision tissues are only now becoming available, it is possible to examine the presence and association of wear debris with inflammation in early implant loosening.

QUESTIONS/PURPOSES

We asked: (1) Does the presence of UHMWPE wear debris in THA revision tissues correlate with innate and/or adaptive immune cell numbers? (2) Does the immune cell response differ between conventional and highly crosslinked UHMWPE cohorts?

METHODS

We collected tissue samples from revision surgery of nine conventional and nine highly crosslinked UHMWPE liners. Polarized light microscopy was used to determine 0.5- to 2-μm UHMWPE particle number/mm2, and immunohistochemistry was performed to determine macrophage, T cell, and neutrophil number/mm2.

RESULTS

For the conventional cohort, correlations were observed between wear debris and the magnitude of individual patient macrophage (ρ=0.70) and T cell responses (ρ=0.71) and between numbers of macrophages and T cells (ρ=0.77) in periprosthetic tissues. In comparison, the highly crosslinked UHMWPE cohort showed a correlation between wear debris and the magnitude of macrophage responses (ρ=0.57) and between macrophage and T cell numbers (ρ=0.68). Although macrophages and T cells were present in both cohorts, the highly crosslinked UHMWPE cohort had lower numbers, which may be associated with shorter implantation times.

CONCLUSIONS

The presence of wear debris and inflammation in highly crosslinked UHMWPE revision tissues may contribute to early implant loosening.

Neurotoxicity of cobalt

Cobalt exerts well-known and documented toxic effects on the thyroid, heart and the haematopoietic system, in addition to the occupational lung disease, allergic manifestations and a probably carcinogenic action. Cobalt neurotoxicity is reported in isolated cases, and it has never been systematically treated. Bilateral optic atrophy and retinopathy, bilateral nerve deafness and sensory-motor polyneuropathy have been described long ago as a result of chronic occupational exposure to cobal powder or during long-term treatment of anaemia with cobalt chloride. Recently, some patients with high levels of cobalt released from metal prosthesis have been referred as presenting with tinnitus, deafness, vertigo, visual changes, optic atrophy, tremor and peripheral neuropathy. The aim of this work is to group these cases and to identify a possible mechanism of cobalt neurotoxicity, focusing on hypothetic individual susceptibility such as altered metal-binding proteins, altered transport processes in target cells or polymorphic variation of genetic background.

Distinct immunohistomorphologic changes in periprosthetic hip tissues from historical and highly crosslinked UHMWPE implant retrievals

Assessment of immune response to implant wear debris in periprosthetic tissue following total hip arthroplasty suggests that multiple factors are involved in the loss implant function. The current study investigated wear debris and the associated immunohistomorphologic changes in tissues from nine patients with historical (gamma air-sterilized) and nine highly crosslinked UHMWPE implant components. Paraffin embedded tissue sections were evaluated for the presence of histiocytes, giant cells, fibrocartilage/bone, and necrosis. To determine the incidence, degree and co-localization of immunohistomorphologic changes and wear, overlapping full-field tissue arrays were collected in brightfield and polarized light. The historical cohort tissues predominantly showed histiocytes associated with significant accumulations of small wear (0.5-2 microm), and giant cells associated with large wear (> or =2 microm). Frequently, focal regions of necrosis were observed in association with wear debris. For the highly crosslinked cohort, inflammation and associated wear debris were limited, but in tissues from patients revised after implantation times of >2 years a response was observed. Whereas significant amounts of fibrocartilage/bone were observed in patients at earlier implantation times. In both cohorts, tissue responses were more extensive in the retroacetabular or proximal femoral regions. The current findings suggest that wear debris-induced inflammation may be a major contributor to the loss of implant function for both the historical and highly crosslinked cohorts, but it is not the primary cause of early implant loosening. This study highlights the importance of using a more quantitative and standardized assessment of immunohistomorphologic responses in periprosthetic tissues, and emphasizes differences in specific anatomical regions of individual patient tissues.

Effects of metal-on-metal wear on the host immune system and infection in hip arthroplasty

BACKGROUND AND PURPOSE

Joint replacement with metal-on-metal (MOM) bearings have gained popularity in the last decades in young and active patients. However, the possible effects of MOM wear debris and its corrosion products are still the subject of debate. Alongside the potential disadvantages such as toxicity, the influences of metal particles and metal ions on infection risk are unclear.

METHODS

We reviewed the available literature on the influence of degradation products of MOM bearings in total hip arthroplasties on infection risk.

RESULTS

Wear products were found to influence the risk of infection by hampering the immune system, by inhibiting or accelerating bacterial growth, and by a possible antibiotic resistance and heavy metal co-selection mechanism.

INTERPRETATION

Whether or not the combined effects of MOM wear products make MOM bearings less or more prone to infection requires investigation in the near future.

Absence of lymphatics at the bone-implant interface: implications for periprosthetic osteolysis

BACKGROUND

Wear particles, found at the bone-implant interface surrounding a loose prosthesis, are commonly phagocytosed by macrophages. Wear particles and wear particle-containing macrophages are also found in regional lymph nodes draining arthroplasty tissues. The means by which wear particles are transported from arthroplasty tissues to lymph nodes is uncertain, as the presence or absence of lymphatic vessels in periprosthetic tissues has not been established.

METHODS

We determined immunophenotypic expression of LYVE-1 and podoplanin, two highly specific lymphatic endothelial cell markers, in the hip arthroplasty pseudocapsule surrounding the false joint and the bone-implant interface of the femoral and acetabular pseu-domembrane.

RESULTS

LYVE-1+/podoplanin+ lymphatic vessels were not identified in the pseudomembrane but were found in the pseudocapsule. Normal bone did not contain lymphatic vessels.

INTERPRETATION

Our findings suggest that the wear particles shed at the bone-implant interface are not transported to draining lymph nodes by lymphatics directly from the pseudomembrane, but via the pseudocapsule. The absence of a lymphatic clearance mechanism may contribute to accumulation of wear particles at the bone-implant interface and promote periprosthetic osteolysis through stimulation of osteoclast formation and activity.

The mechanical properties of recovered PMMA bone cement: a preliminary study

Samples of polymethylmethacrylate (PMMA) bone cement, used in the fixation of hip prostheses, have been recovered from 11 patients after in service life spans of between 15 and 24 years. Eighteen samples in total have been recovered from the acetabular and/or femoral cement. Samples were subjected to three point bending tests, their density, porosity and microhardness determined and all specimens were examined using EDX and X-ray techniques. Since the porosity of many of the samples is very high, the continuous matrix properties are inferred from the performance of individual specimens. No evidence has been found to suggest that the PMMA has deteriorated whilst in-vivo and the mechanical properties of the cement matrices appear to be comparable to freshly made PMMA.

Exposure to chromium, cobalt and molybdenum from metal-on-metal total hip replacement and hip resurfacing arthroplasty

BACKGROUND

All metal implants--and metal-on-metal bearings in particular--corrode and cause a release of metal ions. Because cobalt and chromium have been shown to be carcinogenic and mutagenic in human and animal models, systemic toxicity and cancer risk are considered to be possible disadvantages of the metal-on-metal articulation. This study was designed to investigate the serum concentration profiles of chromium, cobalt and molybdenum after implantation of a Birmingham hip resurfacing arthroplasty (BHR) and a cementless total hip replacement with a 28-mm Metasul articulation (MTHR), over the first 2 years after implantation.

METHODS

We analyzed profiles of metal ion serum levels in 111 patients implanted with a BHR, in 74 patients implanted with an MTHR, and in 130 implant-free probands control subjects using atomic absorption spectrophotometry.

RESULTS

Chromium and cobalt concentrations (in microg/L) of all BHR and MTHR patients differed significantly from those of control subjects (chromium: < 0.25; cobalt: 0.25). The median chromium and cobalt concentrations in BHR patients had increased to 5.1 and 4.3 microg/L 2 years after surgery. Concentrations in BHR patient exceeded those in the unilateral MTHR patients. Molybdenum serum concentrations hardly changed over time in either group and were not significantly different from the concentrations seen in the control subjects.

INTERPRETATION

During the first 2 years after surgery, the Birmingham hip resurfacing arthroplasty leads to a significantly greater increase in serum chromium and cobalt levels than the 28-mm metal-on-metal MTHR. Observation of patients over a longer period will be necessary in order to evaluate any chronic adverse effects to the system due to elevated chromium and cobalt serum concentrations.

Lymphangiogenesis in the bone-implant interface of orthopedic implants: importance and consequence

The lymphatic system plays an essential physiological role in homeostasis, interstitial fluid composition, and immunity while impaired lymphatic function has been implicated in a number of pathological conditions, including arthritis and delayed wound healing. This study investigated lymphatic capillary growth and lymphangiogenesis pathways in the bone-implant interface from patients with aseptically loosened prosthetic joints. The newly developed lymphatic specific marker, podoplanin, has enabled the first demonstration of lymphatic capillaries in peri-prosthetic tissues (60% of cases contained podoplanin positive vessels). The pro-lymphangiogenic factor (VEGF-C) and its receptor VEGFR-3 showed high level of expression in these tissues, (often in areas of high levels of wear debris). However despite the upregulation of the lymphangiogenesis pathway by a VEGF-C/VEGFR-3-mediated mechanism, there were relatively few podoplanin positive lymphatic vessels in the bone-implant interface (3.4% of total vessels). This may have important pathological consequences in terms of perpetuating inflammation and edema by inhibiting the removal of macromolecules, cells, and interstitial fluid. The identification of lymphatic vessels with internalized polyethylene wear particles provides evidence of this route of wear debris transportation to distal sites. This paper highlights the importance of lymphatic vessels in the maintenance of local and distal inflammatory responses to prosthetic wear particles.

The release of metals from metal-on-metal surface arthroplasty of the hip

The aim of the study was to evaluate the serum and urine levels of cobalt (Co), chromium (Cr), manganese (Mn), molybdenum (Mo) and nickel (Ni) in patients who had undergone metal-on-metal hybrid surface arthroplasties on the supposition that a release of metals would occur due to the large head size of this type of implant. Metal levels were determined by using an analytical method based on sector field inductively coupled plasma mass spectrometry. Results showed a significant difference between patients and control subjects in mean levels of Co and Cr in serum (p<0.0001 and p=0.02, respectively) and in urine (p<0.0001 for both). No significant differences were observed in mean serum and urinary levels of Mn, Mo and Ni. Although the clinical consequences of these changes, if any, are unknown, further studies could be performed in a larger number of subjects implanted with a total surface arthroplasty at follow-up times over different periods.

Structure and dynamics of dinuclear zirconium(IV) complexes

We have determined by X-ray crystallography the structures of three dinuclear zirconium(IV) complexes containing the heptadentate ligand dhpta (where H(5)dhpta = 1,3-diamino-2-propanol-N,N,N',N'-tetraacetic acid, 1) and different countercations: K(2)[Zr(2)(dhpta)(2)].5H(2)O (2.5H(2)O), Na(2)[Zr(2)(dhpta)(2)].7H(2)O.C(2)H(5)OH (3.7H(2)O.C(2)H(5)OH), and Cs(2)[Zr(2)(dhpta)(2)].H(5)O(2).Cl.4H(2)O (4.H(5)O(2).Cl.4H(2)O). In the K(I) complex 2, crystallized from water, the two Zr(IV) ions are 3.5973(4) A apart and bridged via two alkoxo groups (average Zr-O 2.165 A). Each Zr(IV) is eight-coordinate and also bound to two N atoms (average Zr-N 2.448 A), and four carboxylate O atoms (average Zr-O 2.148 A). The two dhpta ligands in the dinuclear unit have different conformations. One face of the complex contains an array of 14 oxygen atoms and interacts strongly with the two K(I) ions, one of which is 6-coordinate, the other 8-coordinate, which are 3.922(4) A apart and bridged by a carboxylate O and by two water molecules. The structures of the dinuclear anion [Zr(2)(dhpta)(2)](2-) in the Na(I) complex 3 and in the Cs(I) complex 4 are essentially identical to that found in complex 2, although the alkali metal ions coordinate differently to the oxygen-rich face. All Zr(IV) ions have a distorted triangulated dodecahedral geometry. Although the crystal structure of complex 2 does not indicate the presence of acidic protons, in 4 an [H(5)O(2)](+) unit is strongly H-bonded to an oxygen atom of a coordinated carboxylate group. 1D and 2D (1)H and (13)C NMR spectroscopic and potentiometric studies reveal two deprotonations with pK(a) values of 9.0 and 10.0. At low pH, two carboxylate groups appear to undergo protonation accompanied by chelate ring-opening, and the complex exhibits dynamic fluxional behavior in which the two magnetically nonequivalent dhpta ligands exchange at a rate of 11 s(-1) at pH 3.30, 298 K, as determined from 2D EXSY NMR studies. Ligand interchange is not observed at high pH (>11). The same crystals of complex 2 were obtained from solutions at pH 3 or 12. The dynamic configurational change is therefore mediated by the aqueous solvent.

Foreign body reactions in lymph nodes of oncology patients with joint prostheses—light-, electron microscopic and immunohistological investigations

Foreign body reactions in lymph nodes caused by wear particles from joint prostheses can mimic different lymphadenopathies, including metastatic cancer. The knowledge of these alterations is particularly important for pathologists performing frozen section diagnosis for oncology patients. As recent investigations of pseudocapsules have revealed that most of the wear particles are submicron-sized, transmission electron microscopic investigations were additionally performed. The histological investigation of the pelvic lymph nodes of 22 oncology patients with joint prostheses showed that the bone cement wear prevailed. At least small amounts of polyethylene wear particles were also found in all cases. Metallic wear particles were detected in 90% of the cases. The wear particles induce a macrophage-rich foreign body reaction that can cause an architectural effacement of the lymph nodes. The electron microscopic investigations showed that submicron-sized wear particles prevail. Some of them form conglomerates in size ranges detectable by light microscopy. The immunohistochemical studies showed that the foreign body reactions comprised mature CD163- and PGM1-positive macrophages and few lymphocytes, predominantly T-lymphocytes. The knowledge of the characteristic alterations of regional lymph nodes seems important in order to avoid misinterpretations. Therefore, in particular the detection of intracytoplasmatic wear particles is helpful in this respect.

New aspects in the histological examination of polyethylene wear particles in failed total joint replacements

The most important long-term complication in total joint replacements is aseptic osteolysis. Wear particles such as polyethylene (PE) debris are considered to be one of the causes that play a central role. Several studies indicated that PE can be visualised in paraffin-embedded tissue sections not only by polarised light, but also after oil red staining. To determine whether oil red staining enables sensitive detection of PE, we examined staining of mechanically-produced PE particles by oil red. Furthermore, we studied oil red staining of paraffin-embedded tissue specimens of patients with failed uncemented and cemented total knee and hip prostheses. We applied double labelling of sections by immunohistochemistry using the macrophage marker anti-CD68 and oil red staining. We found that oil red stains both isolated PE particles and PE particles in paraffin-embedded tissue sections. Polymethylmethacrylate particles in failed cemented arthroplasties did not stain in paraffin sections. Double labelling showed strong colocalisation of CD68 and PE. We suggest that oil red staining is a sensitive method to detect PE particles. Oil red staining is particularly helpful in these cases which show a characteristic histological feature of aseptic prosthesis loosening without particles being detectable with routine microscopy and polarised light. We also established that immunohistochemical methods can be applied together with the oil red staining method.

Four-year study of cobalt and chromium blood levels in patients managed with two different metal-on-metal total hip replacements

BACKGROUND

Metal-on-metal total hip prostheses will produce a certain amount of wear debris. This results in increased whole-blood metal levels, which may cause adverse effects. It is not known to what extent the problem has been overcome by advances in alloy technology.

METHODS

In 259 patients who with total hip replacement, blood cobalt and chromium concentrations were measured with atomic absorption spectrophotometry over a period of four years after arthroplasty. Of the patients enrolled in the study, 131 had been managed with a METASUL cobalt-chromium alloy metal-on-metal bearing combination, while 128 had been given a SIKOMET-SM21 cobalt-chromium alloy metal-on-metal combination. The control group consisted of 31 age- and gender-matched subjects.

RESULTS

Compared with the controls, all the patients had higher cobalt and chromium levels. Cobalt concentrations were up to 50 times higher, while chromium concentrations were up to 100 times higher.

CONCLUSIONS

Both systems showed evidence, in the whole-blood samples, of wear debris production by the implants. Therefore, patients managed with metal-on-metal bearing combinations should be carefully monitored in order to ensure that any local or systemic complications are detected early on.

Dissemination of wear particles to the liver, spleen, and abdominal lymph nodes of patients with hip or knee replacement

BACKGROUND

The importance of particles generated by wear and corrosion of joint replacement prostheses has been understood primarily in the context of the local effects of particle-induced periprosthetic osteolysis and aseptic loosening. We studied dissemination of wear particles in patients with total hip and knee replacement to determine the prevalence of and the histopathological response to prosthetic wear debris in the liver, spleen, and abdominal para-aortic lymph nodes.

METHODS

Postmortem specimens from twenty-nine patients and biopsy specimens from two living patients with a failed replacement were analyzed. Specimens of tissue obtained from the cadavera of fifteen patients who had not had a joint replacement served as controls. The concentration of particles and the associated tissue response were characterized with the use of light microscopy of stained histological sections. Metallic particles were identified by electron microprobe analysis. Polyethylene particles were studied with the use of oil-red-O stain and polarized light microscopy. The composition of polyethylene particles was confirmed in selected cases by Fourier transform infrared spectroscopy and hot-stage thermal analysis. Twenty-one of the patients studied post mortem had had a primary total joint replacement. Eleven of them had had a hip prosthesis for a mean of sixty-nine months (range, forty-three to 171 months), and ten had had a knee replacement for a mean of eighty-four months (range, thirty-one to 179 months). The other eight patients studied post mortem had had a hip replacement in which one or more components had loosened and had been revised. The mean time between the initial arthroplasty and the time of death was 174 months (range, forty-seven to 292 months), and the mean time between the last revision procedure and the time of death was seventy-one months (range, one to 130 months).

RESULTS

Metallic wear particles in the liver or spleen were more prevalent in patients who had had a failed hip arthroplasty (seven of eight) than in patients who had had a primary hip (two of eleven) or knee replacement (two of ten). The principal source of wear particles in the majority of these patients involved secondary nonbearing surfaces rather than wear between the two primary bearing surfaces as intended. In one living patient, dissemination of titanium alloy particles from a hip prosthesis with mechanical failure was associated with a visceral granulomatous reaction and hepatosplenomegaly, which required operative and medical treatment. Metallic wear particles were detected in the paraaortic lymph nodes in 68 percent (nineteen) of the twenty-eight patients with an implant from whom lymph nodes were available for study. In 38 percent (eleven) of all twenty-nine patients with an implant who were studied post mortem, metallic particles had been further disseminated to the liver or spleen, where they were usually found within small aggregates of macrophages occurring as infiltrates without apparent pathological importance. Polyethylene particles elicited a similar response. They were identified in the paraaortic lymph nodes of 68 percent (nineteen) of the twenty-eight patients and the liver or spleen of 14 percent (four) of the twenty-nine patients. The majority of the disseminated wear particles were less than one micrometer in size. Currently available methods lack the sensitivity and specificity necessary to detect very low concentrations of submicrometer polyethylene particles and probably underestimated the prevalence of polyethylene wear debris in the liver and spleen.

CONCLUSIONS

In this study, systemic distribution of metallic and polyethylene wear particles was a common finding, both in patients with a previously failed implant and in those with a primary total joint prosthesis. The prevalence of particles in the liver or spleen was greater after reconstructions with mechanical failure. (ABSTRACT TRUNCATED)

Prevention of loosening in total hip replacements using guided bone regeneration

The aim of this study was to prevent wear debris from reaching the interface of the acetabular cup and femoral component by using a partially occlusive expanded polytetrafluoroethylene membrane. This membrane initially acted as a physical seal, which became incorporated by bone and soft tissue, forming a secondary biologic seal, preventing loosening. An animal model was developed to test the hypothesis. The model replicated the mechanisms of loosening where the effects of wear debris were studied. Using femoral heads with the appropriate roughness, a goat model produced the radiologic and histologic presentation of loosening as observed in total hip replacements in humans. Loosening was assessed by measurement of the radiolucent lines, and was attributed to wear debris by histologic investigation. The expanded polytetrafluoroethylene membrane prevented acetabular implant loosening to a statistical significance of 0.02 in a blinded assessment when compared with the control groups. Loosening of the first 5 mm of the proximomedial aspect of the femur also was prevented. The authors of the current study prevented wear particle-induced osteolysis in the acetabular component by using an expanded polytetrafluoroethylene membrane to seal the bone-cement interface.

Clinical manifestations of a sometimes silent disease

Although the host tissue response to debris is rarely symptomatic, the clinical manifestations of implant wear are profound. Even the most experienced orthopedic surgeon can be challenged in managing this sometimes silent disease.