Enantiomer separation using BSA as chiral stationary phase in affinity OTEC and OTLC

Progress in Chiral Stationary Phases Based on Proteins and Glycoproteins

A lot of chiral stationary phases (CSPs) have been introduced for the purpose of analytical and preparative separations of enantiomers. CSPs based on proteins and glycoproteins have unique properties among those CSPs. This review article deals with the preparation of CSPs based on proteins and glycoproteins, their chiral recognition properties and mechanisms, focusing on the CSPs investigated in our group. The dealt proteins and glycoproteins are including bovine serum albumin, human serum albumin, lysozyme, pepsin, human α₁-acid glycoprotein (AGP), chicken ovomucoid and chicken ovoglycoprotein (named chicken AGP).

Chiral separations by capillary electrophoresis using proteins as chiral selectors

Capillary electrophoresis (CE) methods using proteins as the chiral selectors have been developed for the separation of enantiomeric mixtures. For chiral separations in protein-based CE, two methods were utilized. One is affinity capillary electrochromatography (ACEC), and the other is affinity CE (ACE). This chapter deals with the advantages and disadvantages of ACEC and ACE. Furthermore, enantioseparations utilizing ACEC based on packed α(1)-acid glycoprotein-immobilized silica gels, immobilized avidin to fused silica capillaries and ACE based on penicillin G-acylase dissolved in the running buffer are described in detail.

Enantiospecific perfluorooctane sulfonate (PFOS) analysis reveals evidence for the source contribution of PFOS-precursors to the Lake Ontario foodweb

Exposure to perfluorooctane sulfonate (PFOS) may arise directly, from emission and exposure to PFOS itself, or indirectly via the environmental release and degradation of PFOS-precursors. Human serum enantiomer fractions (EFs) of 1m-PFOS have been shown to be nonracemic, suggesting that PFOS-precursors are a significant source of PFOS in humans, but little is known about the importance of PFOS-precursors in ecosystems. In the current work, concentrations of PFOS, perfluorooctane sulfonamide (PFOSA), PFOS isomer profiles, and EFs of 1m-PFOS were determined in Lake Ontario water, sediment, fishes and invertebrates. Concentrations of PFOS and PFOSA were highest in slimy sculpin and Diporeia, and concentrations of the two compounds were often correlated. 1m-PFOS was racemic in sediment, water, sculpin and rainbow smelt, but nonracemic in the top predator, lake trout, and all invertebrate species. Furthermore, EFs were correlated with the relative concentrations of PFOS and PFOSA in invertebrates. Overall, these empirical observations with a new analytical tool confirm previous suggestions that PFOS-precursors contribute to PFOS in the food web, likely via sediment. Implications are that future PFOS exposures in this ecosystem will be influenced by an in situ source, and that the apparent environmental behavior of PFOS (e.g., bioaccumulation potential) can be confounded by precursors.

Recent applications in nanoliquid chromatography

Since its first introduction by Karlsson and Novotny in 1988 nano-LC has emerged as a complementary and/or competitive separation method to conventional HPLC, offering several advantages such as higher efficiency, ability to work with minute sample sizes and lower consumption of mobile phases, and better compatibility with MS, etc. Although its use was not so extended initially, in the last years new and interesting applications have appeared which deserve to be carefully considered. The aim of this review is therefore to provide an updated and critical survey of different nano-LC applications in analytical chemistry.

Capillary-scale frontal affinity chromatography/MALDI tandem mass spectrometry using protein-doped monolithic silica columns

Frontal affinity chromatography (FAC) interfaced with electrospray mass spectrometry (ESI-MS) has been reported as a potential method for screening of compound mixtures against immobilized target proteins. However, the interfacing of bioaffinity columns to ESI-MS requires that the eluent that passes through the protein-loaded column have a relatively low ionic strength to produce a stable spray. Such low ionic strength solvents can cause serious problems with protein stability and may also affect binding constants and lead to high nonspecific binding to the column. Herein, we report on the interfacing of bioaffinity columns to matrix-assisted laser desorption/ionization (MALDI) MS/MS as a new platform for FAC/MS studies. Capillary columns containing a monolithic silica material with entrapped dihydrofolate reductase were used for frontal affinity chromatography of small-molecule mixtures. The output from the column was combined with a second stream containing alpha-cyano-hydoxycinnamic acid in methanol and was deposited using a nebulizer-assisted electrospray method onto a conventional MALDI plate that moved relative to the column via a computer-controlled x-y stage, creating a semipermanent record of the FAC run. The use of MALDI MS/MS allowed for buffers with significantly higher ionic strength to be used for FAC studies, which reduced nonspecific binding of ionic compounds and allowed for better retention of protein activity over multiple runs. Following deposition, MALDI analysis required only a fraction of the chromatographic run time, and the deposited track could be rerun multiple times to optimize ionization parameters and allow signal averaging to improve the signal-to-noise ratio. Furthermore, high levels of potential inhibitors could be detected via MALDI with limited ion suppression effects. Both MALDI- and ESI-based analysis showed similar retention of inhibitors present in compound mixtures when using identical ionic strength conditions. The results show that FAC/MALDI-MS should provide advantages over FAC/ESI-MS for high-throughput screening of compound mixtures.

Enantioselective aptameric molecular recognition material: Design of a novel chiral stationary phase for enantioseparation of a series of chiral herbicides by capillary electrochromatography

A chiral stationary phase derived from an L-RNA aptamer is evaluated for the enantiomer separation of a series of herbicide molecules (aryloxypropionic, aryloxyphenoxypropionic, and aminopropionic acid) by CEC after binding to biotin and grafting upon streptavidin-modified porous glass beads. We demonstrated that the aptamer capillary was stable in term of efficiency and retention during a long period. The influences of the mobile phase constitution and its flow-velocity on the enantioseparation were also investigated. The results suggest that the interactions of the enantiomer during CEC are solely based on chromatographic mechanisms and that the electrophoresis plays only a minor role. The separation efficiency and peak shape could be improved by Mg2+ divalent cation that stabilized the aptamer secondary structure and thus enhanced the mass transfer kinetics during the ligand-aptamer binding process. In addition, it was demonstrated that the determination of the enantiomerization barrier of flamprop was possible using this chiral stationary phase.

Chiral resolution of tryptophan derivatives by CE using canine serum albumin and bovine serum albumin as chiral selectors

This work deals with the application of BSA and canine serum albumin (CSA) for enantioseparation of tryptophan derivatives with CE. The aim of this work was the investigation of the influence of different functional groups of tryptophan derivatives on enantioseparation. CSA as a chiral selector was tested to compare its selector properties with those of BSA. The enantiomers of the tryptophan derivatives were separated by adding BSA or CSA to the BGE. The influence of pH, temperature, BSA and CSA concentration and organic modifiers was investigated. It was found that the stereoselectivity for the different tryptophan derivatives is dependent on the albumin species. It turned out that the different functional groups of the derivatives showed a significant influence on stereoselectivity.

Chiral separation of acidic drug components by open tubular electrochromatography using avidin immobilized capillaries

Avidin was immobilized covalently onto the inner surface of fused silica capillaries as a stationary phase in an open tubular capillary electrochromatography (OT-CEC) for chiral separations. The modification was attained by a combination of glutaraldehyde with both an amino-silylated fused silica surface and avidin using a Schiff base formation reaction. This method couples the advantage of high efficiency and small consumption of a chiral selector with the possibility of UV detection without limitations of protein absorption. In addition, the prepared capillary was stable for 50 days with over 100 runs. To evaluate the electrochromatographic performance of the prepared capillaries, the chiral separation of abscisic acid and arylpropionic acids were investigated. Effects of the modification condition of protein, pH of running buffer, and an organic modifier on the enantioseparation were also investigated. In addition, the avidin immobilized capillary was employed for the selective chiral analysis with an electrospray ionization mass spectrometry (ESI-MS) detection scheme.

Immobilization of phospholipid-avidin on fused-silica capillaries for chiral separation in open-tubular capillary electrochromatography

Phospholipid-coated fused-silica capillaries with immobilized avidin were applied in the chiral separation of D,L-tryptophan, D,L-PTH-serine, and D,L-PTH-threonine at pH 7.4 by open-tubular CEC. Liposomes prepared from 1,2-dipalmitoyl-sn-glycero-3-phosphocholine, 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine-N-(Cap biotinyl), or 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine-N-(Biotinyl) with different amounts of phosphatidylserine were assessed as phospholipid coating materials. The stability of the coating and the success of the coating procedure were evaluated in terms of the repeatability of the enantiomer migration times and the resolution of enantiomers. The coating procedure itself significantly affected the migration times and resolution of the enantiomers. Reliable chiral separations with high separation efficiencies were achieved through careful choice of the coating method.

Immobilized enzyme reactor chromatography: Optimization of protein retention and enzyme activity in monolithic silica stationary phases

Our group recently reported on the application of protein-doped monolithic silica columns for immobilized enzyme reactor chromatography, which allowed screening of enzyme inhibitors present in mixtures using mass spectrometry for detection. The enzyme was immobilized by entrapment within a bimodal meso/macroporous silica material prepared by a biocompatible sol-gel processing route. While such columns proved to be useful for applications such as screening of protein-ligand interactions, significant amounts of entrapped proteins leached from the columns owing to the high proportion of macropores within the materials. Herein, we describe a detailed study of factors affecting the morphology of protein-doped bioaffinity columns and demonstrate that specific pH values and concentrations of poly(ethylene glycol) can be used to prepare essentially mesoporous columns that retain over 80% of initially loaded enzyme in an active and accessible form and yet still retain sufficient porosity to allow pressure-driven flow in the low muL/min range. Using the enzyme gamma-glutamyl transpeptidase (gamma-GT), we further evaluated the catalytic constants of the enzyme entrapped in capillary columns with different silica morphologies as a function of flowrate and backpressure using the enzyme reactor assay mode. It was found that the apparent activity of the enzyme was highest in mesoporous columns that retained high levels of enzyme. In such columns, enzyme activity increased by approximately 2-fold with increases in both flowrate (from 250 to 1000 nL/min) and backpressure generated (from 500 to 2100 psi) during the chromatographic activity assay owing to increases in k(cat) and decreases in K(M), switching from diffusion controlled to reaction controlled conditions at ca. 2000 psi. These results suggest that columns with minimal macropore volumes (<5%) are advantageous for the entrapment of soluble proteins for bioaffinity and bioreactor chromatography.

Capillary electrochromatography of amino acids with a protein-bonded porous-layer open-tubular column

A protein-bonded porous-layer open-tubular (PLOT) column has been synthesized and applied to the separation of amino acids by CEC. The porous layer was coated on the capillary inner wall by in situ polymerization of 2-hydroxyethyl methacrylate and 2-vinyl-4,4-dimethylazlactone in the presence of 1-decanol as a porogen inside a fused-silica capillary silanized with gamma-methacryloxypropryltrimethoxysilane. The azlactone functionalities at the surface of the porous polymeric support layer were allowed to react with BSA to yield a protein-bonded PLOT column. This porous layer was characterized by scanning electron microscopy and its thickness was about 1 microm. CEC on this column gave enhanced resolution of three amino acids (histidine, phenylalanine, and tryptophan), and baseline separation was achieved with 20 mM phosphate buffer, pH 8.0.

Open tubular capillary electrochromatography using capillaries coated with films of alkanethiol-self-assembled gold nanoparticle layers

We have used alkanethiol self-assembly and dithiol layer-by-layer (LBL) self-assembly processes to prepare an Au nanoparticle (NP)-coated open tubular capillary electrochromatography (OTCEC) column for the separation of three neutral steroid drugs (testosterone, progesterone, and testosterone propionate). The CEC column was fabricated through LBL self-assembly of Au NPs on a 3-aminopropyltrimethoxysilane (APTMS)-modified fused-silica capillary and subsequent surface functionalization of the Au NPs through self-assembly of alkanethiols. We investigated the electrochromatographic properties of the resulting Au NP-coated CEC column using a "reversed phase" test mixture of three steroid drugs. We found that the key factors affecting the separation performance were the number of Au NP layers, the length of the carbon-atom chain of the alkanethiol self-assembled on the Au NPs, the percentage of organic modifier, and the pH of the running electrolyte. This study reveals that the self-assembly of alkanethiols and dithiols onto Au NPs provides stationary phases for CEC separation that are easy to prepare and whose retention behavior is highly controllable and reproducible. We believe that our findings will contribute to further studies of the application of nanotechnology to separation science.

Recent highlights in stationary phase design for open-tubular capillary electrochromatography

This review examines the most recent innovations made to achieve high performance in open-tubular capillary electrochromatography (OT-CEC) separations, focusing on the ingenious chemical and physical solutions made to increase the surface area and equip the stationary phase with exploitable selectivity. Among the approaches taken are chemically bonded ligands, etching with chemical bonding, sol-gels, molecularly imprinted polymers, porous layers, physically attached or adsorbed phases, and nanoparticle coatings. Particularly noteworthy are modern developments with macrocyclic receptor ligands, nanoparticles and open channel electrochromatography on-chip.

Protein-Doped Monolithic Silica Columns for Capillary Liquid Chromatography Prepared by the Sol−Gel Method: Applications to Frontal Affinity Chromatography

The development of bioaffinity chromatography columns that are based on the entrapment of biomolecules within the pores of sol-gel-derived monolithic silica is reported. Monolithic nanoflow columns are formed by mixing the protein-compatible silica precursor diglycerylsilane with a buffered aqueous solution containing poly(ethylene oxide) (PEO, MW 10,000) and the protein of interest and then loading this mixture into a fused-silica capillary (150-250-microm i.d.). Spinodal decomposition of the PEO-doped sol into two distinct phases prior to the gelation of the silica results in a bimodal pore distribution that produces large macropores (>0.1 microm), to allow good flow of eluent with minimal back pressure, and mesopores (approximately 3-5-nm diameter) that retain a significant fraction of the entrapped protein. Addition of low levels of (3-aminopropyl)triethoxysilane is shown to minimize nonselective interactions of analytes with the column material, resulting in a column that is able to retain small molecules by virtue of their interaction with the entrapped biomolecules. Such columns are shown to be suitable for pressure-driven liquid chromatography and can be operated at relatively high flow rates (up to 500 microL x min(-1)) or with low back pressures (<100 psi) when used at flow rates of 5-10 microL x min(-1). The clinically relevant enzyme dihydrofolate reductase was entrapped within the bioaffinity columns and was used to screen mixtures of small molecules using frontal affinity chromatography with mass spectrometric detection. Inhibitors present in compound mixtures were retained via bioaffinity interactions, with the retention time being dependent on both the ligand concentration and the affinity of the ligand for the protein. The results suggest that such columns may find use in high-throughput screening of compound mixtures.

Separation of drug enantiomers by liquid chromatography and capillary electrophoresis, using immobilized proteins as chiral selectors

Proteins display interesting chiral discrimination properties owing to multiple possibilities of intermolecular interactions with chiral compounds. This review deals with proteins which have been used as immobilized chiral selectors for the enantioseparation of drugs in liquid chromatography and capillary electrophoresis. The main procedures allowing the immobilization of proteins onto matrices, such as silica and zirconia particles, membranes and capillaries are first presented. Then the factors affecting the enantioseparation of drugs in liquid chromatography, using various protein-based chiral stationary phases (CSPs), are reviewed and discussed. Last, chiral separations already achieved using immobilized protein selectors in affinity capillary electrochromatography (ACEC) are presented and compared in terms of efficiency, stability and reproducibility.

Enantiomeric separation of acidic compounds of pharmaceutical interest by capillary electrochromatography employing glycopeptide antibiotic stationary phases

Enantiomeric separation of some selected acidic compounds of pharmaceutical interest belonging to the group of non-steroidal anti-inflammatory drugs were separated by capillary electrochromatography employing silica based glycopeptide antibiotic stationary phases, namely vancomycin or a teicoplanin derivatives (Hepta-Tyr). The vancomycin stationary phase allowed to achieve the chiral resolution of some racemic studied compounds only using mobile phases containing ammonium formate at a relatively low pH 2.5-3.5 and acetonitrile. Employing the teicoplanin derivative stationary phase, good enantiomeric resolution was achieved eluting with mobile phases containing sodium phosphate pH 6-acetonitrile. Enantiomers were moved to the detector because a relatively high reversed electroosmotic flow (due to the positive charge of the stationary phase) and to the electrophoretic mobility of analytes.

Use of short-end injection capillary packed with a glycopeptide antibiotic stationary phase in electrochromatography and capillary liquid chromatography for the enantiomeric separation of hydroxy acids

A new chiral stationary phase (CSP) was prepared by reacting MDL 63,246 (Hepta-Tyr), a glycopeptide antibiotic belonging to the teicoplanin family, with 5-microm diol-silica particles. The CSP mixed with 5-microm amino silica particles (3:1) was packed into 75-microm fused-silica capillaries for only 6.6 cm and used for electrochromatographic experiments analyzing several hydroxy acid enantiomers. A reversed electroosmotic flow carried both analytes and mobile phase towards the anode in a short time (1-3 min), being baseline resolved all the studied analytes. In order to achieve the fastest enantiomeric resolution of the studied hydroxy acids, the effect of several experimental parameters such as mobile phase composition (organic modifier type and concentration, pH of the buffer and ionic strength), capillary temperature and applied voltage on enantioresolution factor, retention time, enantioselectivity were evaluated. The packed capillary column allowed the separation of mandelic acid enantiomers in less than 72 s with resolution factor Rs=2.18 applying a voltage of 30 kV and eluting with a mobile phase composed by 50 mM ammonium acetate (pH 6)-water-acetonitrile (1:4:5, v/v). The CSP was also tested in the capillary liquid chromatography mode resolving all the studied enantiomers applying 12 bar pressure to the mobile phase [50 mM ammonium acetate (pH 6)-water-methanol-acetonitrile, 1:4:2:3, v/v)], however, relatively long analysis times were observed (12-20 min).

Physically adsorbed chiral stationary phase of avidin on monolithic silica column for capillary electrochromatography and capillary liquid chromatography

The physical adsorption method proposed previously has been successfully applied to a monolithic silica column. By virtue of the physical adsorption, a chiral stationary phase of avidin was prepared onto the silica monolith. The phase ratio of resulting stationary phase was evaluated with frontal analysis. The method proved to be comparable in phase ratio to the chemical bonding methods used in high-performance liquid chromatography (HPLC). Enantiomer separations were carried out in capillary electrochromatography (CEC) and capillary liquid chromatography (CLC) modes. Due to its larger phase ratio, the resulting column showed more powerful separation capability as compared to open-tubular CEC (OTCEC). Twelve chiral compounds were baseline-resolved. The resulting column showed high separation efficiency, with average theoretical plate numbers of 66 000/m for CLC and 122 000/m for CEC. Good reproducibility was observed, with RSD value less than 1.3% for retention time, retention factor and separation factor, and less than 6.6% for plate counts and resolution (n = 40). Fast separations were achieved with a short column. The test enantiomers were baseline-resolved within 4 min under CLC and CEC modes. In addition, field-enhanced sample injection (FESI) was coupled to CLC as well as CEC to improve the detection sensitivity.

Evaluation of extended light path capillary and etched capillary for use in open tubular capillary electrochromatography

Poor sensitivity and low phase ratio are the main drawbacks of open tubular capillary electrochromatography (OTCEC). The poor sensitivity results from the use of narrow bore size capillary, whereas the low phase ratio, which limits the separation capability, is caused by the limited surface area of conventional capillary. Two strategies may be useful to overcome these disadvantages. First, an extended light path (ELP) capillary, which has a bubble cell at the detection point, is used to improve the sensitivity. Secondly, an etched capillary of a 1,000-fold increased surface area is used to enhance the phase ratio. In this work, use of an ELP capillary and an etched capillary in OTCEC was evaluated with a chiral stationary phase of avidin prepared with the physical adsorption method. With a 20 microm I.D. ELP capillary with a 150 microm bubble cell, the peak height was enhanced by 4-10-fold and the corrected peak area was increased by 12-fold relative to a 20 microm I.D. conventional capillary. However, the peak efficiency and resolution decreased noticeably. The phase ratio on the etched capillary was slightly enhanced, by a factor of 1.64 relative to an unetched capillary. Consequently, the separation capability was slightly improved. The increase in the phase ratio was much lower than that expected from the increase in surface area, the reason for which is probably the reduced density of surface silanol group and the generation of nitrogen-containing groups due to the etching process.

Chiral separation by chromatographic and electromigration techniques. A review

This review gives a survey of different chiral separation principles and their use in high-performance liquid chromatography (HPLC), gas chromatography (GC), supercritical fluid chromatography (SFC), thin-layer chromatography (TLC), capillary electrophoresis (CE) and capillary electrochromatography (CEC) highlighting new developments and innovative techniques. The mechanisms of the different separation principles are briefly discussed and some selected applications are shown.

Separation of enantiomers by open capillary electrochromatography on polysiloxane-bonded permethyl-beta-cyclodextrin

The separation of enantiomers by open capillary electrochromatography (o-CEC) using Chirasil-Dex as chiral stationary phase (CSP) is reviewed. In Chirasil-Dex, permethylated beta-cyclodextrin is linked via a single octamethylene spacer to polydimethylsiloxane. The CSP is coated and thermally immobilized onto the internal surface of a fused-silica column (i.d. 50 microm). Employing a single open-tubular column coated with Chirasil-Dex, a unified enantioselective approach can be realized using the four common chromatographic techniques: o-GC, o-SFC, o-LC and o-CEC. The chiral stationary phase Chirasil-Dex can be combined with a charged cyclodextrin derivative, which is added into the mobile phase. In the resulting dual chiral recognition system, enhancement of enantioselectivity (matched case) or compensation of enantioselectivity (mismatched case) are observed. The overall enantioselectivity is dependent on the sense of enantioselectivity of the selectors chosen and their influence on the electrophoretic and electroosmotic migration of the enantiomers of a selectand. The feasibility to couple chiral o-CEC and ESI/MS is demonstrated for trace analysis of enantiomeric drugs in body fluids.

Capillary electrochromatographic enantioseparations using a packed capillary with a 3 microm OD-type chiral packing

Enantiomer separations by capillary electrochromatography (CEC) using a packed capillary were investigated. As a chiral stationary phase, an OD-type packing material of 3 microm particle diameter, which is a silica-gel based material coated with cellulose tris(3,5-dimethylphenylcarbamate), was employed. The chiral packing was packed into a 100 microm I.D. fused-silica capillary by a pressurized method. Several racemic enantiomers were successfully resolved with acidic or basic buffers containing acetonitrile as mobile phases. The separation efficiencies obtained in this chiral CEC system were superior to those in the previously reported chiral CEC system using 5 microm particles. The typical plate heights obtained for several enantiomers were 4.6-6.6 microm or reduced plate heights of 1.5-2.2. Good repeatabilities in the migration time, peak height, and corrected peak area were observed as well as for the plate number. As an application study of this CEC system, an optical purity test was carried out by using benzoin enantiomers. A 1% content of one enantiomer in the other enantiomer was successfully separated and detected.

Recent advances in enantiomer separations by affinity capillary electrophoresis using proteins and peptides

Enantiomer separations by capillary electrophoresis (CE), using proteins as chiral selectors--affinity capillary electrophoresis (ACE) with free solutions and capillary electrochromatography (CEC)--with protein immobilized capillaries, are reviewed. The separation principle, recent advances in this field and some interesting topics are presented. In ACE, various enantiomer separations have been already reported using either plasma proteins or egg white ones. Miscellaneous proteins were also explored in the last few years. On the contrary, only a limited number of enantiomer separations have been successfully achieved in CEC. CEC is not yet mature enough to date, and further investigations, such as efficiency, durability and reproducibility of capillaries, will be necessary for the use of routine analyses. The study of enantioselective drug-protein binding is important in pharmaceutical developments. Some applications including high-performance CE/frontal analysis (HPCE/FA) are introduced in this paper.

Use of vancomycin silica stationary phase in packed capillary electrochromatography I. Enantiomer separation of basic compounds

Chiral separation of basic compounds was achieved by using 75 or 100 microm ID fused-silica capillaries packed with a vanoomycin-modified diol silica stationary phase. The capillary was firstly packed for about 12 cm with a slurry mixture composed of diolsilica (3:1) then with the vancomycin modified diol-silica (3:1) (23 cm), and finally with diol-silica (3:1) for about 2 cm. Frits were prepared by a heating wire at the two ends of the capillary; the detector window was prepared at 8.5 cm from the end of the capillary where vancomycin was not present. The influence of the mobile phase composition (pH and concentration, organic modifier type and concentration) on the velocity of the electroosmotic flow, chiral resolution and enantioselectivity was studied. Good enantiomeric resolution was achieved for atenolol, oxprenolol, propranolol, and venlafaxine using a mobile phase composition of 100 mM ammonium acetate solution (pH 6)/water/acetonitrile (5:5:90 v/v/v) while for terbutaline a mixture of 5:15:80 v/v/v provided the best separations. The use of methanol instead of acetonitrile caused a general increase of enantiomer resolution of the studied compounds together with a reduction of efficiency and detector response. However, the combination of acetonitrile and methanol in the mobile phase (as, e.g., 10% methanol and 80% acetonitrile) allowed to improve the enantiomer resolution with satisfactory detector response.

Separation of multicomponent mixtures of 2,4-dinitrophenyl labelled amino acids and their enantiomers by capillary zone electrophoresis

The use of capillary zone electrophoresis (CZE) for the separation of a group of 33 2,4-dinitrophenyl labeled amino acids (DNP-AA), including DNP-AA racemates, DNP-L-AA enantiomers and achiral DNP-AAs, was investigated. Alpha-, beta- and gamma-cyclodextrins (CDs) and their derivatives (hydroxypropyl derivatives of alpha-, beta- and gamma-CDs, polymeric beta-CD and 6A-methylamino-beta-cyclodextrin (MA-beta-CD)) served as complexing agents and chiral selectors in this investigation. Although native alpha- and gamma-CDs and their derivatives influenced the effective mobilities of the studied DNP-AAs in different ways, they generally failed to resolve enantiomers of the individual DNP-AAs. On the other hand, beta-CD and all of its derivatives were found to be effective in this respect. Of these, the best results were achieved with a positively charged MA-beta-CD and this chiral selector resolved enantiomers of ten DNP-AA racemates available for this study. However, a complete resolution of these enantiomers in one CZE run required that the effect of the chiral selector be complemented by complexing effects of polyvinyl pyrrolidone (PVP) or gamma-CD. Complexing and chiral recognition capabilities of MA-beta-CD combined with complexing effects of gamma-CD and PVP provided separating conditions suitable for the CZE separations of multicomponent mixtures of DNP-AAs with preserved resolutions of the enantiomers. For example, a mixture consisting of 43 DNP-AA constituents was resolved using an MA-beta-CD/gamma-CD combination with three peak overlaps.

Enantioseparations in capillary electromigration techniques: recent developments and future trends

This review summarizes the current status of enantioseparations using capillary electromigration techniques and gives the authors insights on the selected fundamental aspects and future trends in this field. The most recent developments in the field of chiral separations using capillary electrophoresis (CE) and capillary electrochromatography (CEC) are summarized. The status of chiral electromigration techniques is evaluated tacking into account the most recent developments in related techniques such as chiral HPLC, GC and SFC.

Recent progress in enantiomer separation by capillary electrochromatography

Enantiomer separation by electrochromatography (CEC) can be performed in three modes: (i) open-tubular capillary electrochromatography (o-CEC), in which the chiral selector is physically adsorbed coated, and thermally immobilized or covalently attached to the internal capillary wall; (ii) packed capillary electrochromatography (p-CEC), in which the capillary is either filled with chiral modified silica particles or with an achiral packing material, and a chiral selector is added to the mobile phase; and (iii) monolithic (rod)-capillary electrochromatography (rod-CEC) in which the chiral stationary phase (CSP) consists of a single piece of porous solid. We present an overview on methods and new trends in the field of electrochromatographic enantiomer separation such as CEC with either nonaqueous mobile phases or stationary phases with incorporated permanent charges, or with packing beds consisting of nonporous silica particles or particles with very small internal diameters.

Recent progress in chiral separation principles in capillary electrophoresis

This review summarizes recent developments in the field of chiral separations by electromigration techniques including capillary zone electrophoresis (CZE), capillary gel electrophoresis (CGE), isotachophoresis (ITP), electrokinetic chromatography (EKC), and capillary electrochromatography (CEC). This overview focuses on the development of new chiral selectors and the introduction of new techniques rather than applications of already established selectors and methods. The mechanisms of the different chiral separation principles are discussed.

Capillary electrochromatography with physically and dynamically absorbed stationary phases

Adsorption is always considered a troublesome effect in capillary electrophoresis (CE) and capillary electrochromatography (CEC). However, the adsorption effect can also be exploited to prepare or optimize the stationary phase in CEC. Compared with the chemical synthesis of new stationary phase materials for CEC, this method is simpler and more convenient. This review is focused on CEC with physically and dynamically adsorbed stationary phases. Separation of some acidic, basic and neutral solutes as well as enantiomers in CEC with dynamically adsorbed stationary phases are presented. The theory for the migration of charged solutes and the stationary phases currently used in CEC are also briefly reviewed.

Enantiomer separation by capillary electrochromatography on a cyclodextrin-modified monolith

A chiral monolithic stationary phase was prepared by packing a capillary with bare porous silica and sintering the silica bed at high temperature. The resulting silica monolith was polymer-coated with Chirasil-Dex, a permethylated beta-cyclodextrin covalently linked via an octamethylene spacer to dimethylpolysiloxane. Subsequently, Chirasil-Dex was thermally immobilized on the silica support and a chiral monolith of very high stability (30 kV, more than 400 bar pressure) was obtained. The enantiomer separation of various chiral compounds by monolithic (rod) capillary electrochromatography (rod-CEC) was feasible. This method was compared with capillary liquid chromatography (LC) in a single-column mode using unified equipment. About two to three times higher efficiency was found in the rod-CEC mode as compared to rod-LC. The influence of pressure-driven flow support on efficiency, resolution, elution time and baseline stability was investigated. The amount and nature of organic modifier strongly influences efficiency and resolution.

Enantiomer separation of drugs by capillary electrophoresis using proteins as chiral selectors

The separation of drug enantiomers using proteins as the chiral selectors in capillary electrophoresis (CE) is considered in this review. The proteins used include albumins such as bovine serum albumin, human serum albumin and serum albumins from other species, glycoproteins such as alpha1-acid glycoprotein, crude ovomucoid, ovoglycoprotein, avidin and riboflavin binding protein, enzymes such as fungal cellulase, cellobiohydrolase I, pepsin and lysozyme and other proteins such as casein, human serum transferrin and ovotransferrin. Protein-based CE is carried out in two modes: in one proteins are immobilized or adsorbed within the capillary, or protein-immobilized silica gels are packed into the capillary (affinity capillary electrochromatography mode), and in the other proteins are dissolved in the running buffer (affinity CE mode). Furthermore, the advantages and limitations of the two modes and the factors affecting the chiral separations of various drugs by protein-based CE are discussed.

Chiral separation of amino acids and peptides by capillary electrophoresis

Chiral separation of amino acids and peptides by capillary electrophoresis (CE) is reviewed regarding the separation principles of different approaches, advantages and limitations, chiral recognition mechanisms and applications. The direct approach details various chiral selectors with an emphasis on cyclodextrins and their derivatives, antibiotics and chiral surfactants as the chiral selectors. The indirect approach deals with various chiral reagents applied for diastereomer formation and types of separation media such as micelles and polymeric pseudo-stationary phases. Many derivatization reagents used for high sensitivity detection of amino acids and peptides are also discussed and their characteristics are summarized in tables. A large number of relevant examples is presented illustrating the current status of enantiomeric and diastereomeric separation of amino acids and peptides. Strategies to enhance the selectivity and optimize separation parameters by the application of experimental designs are described. The reversal of enantiomeric elution order and the effects of organic modifiers on the selectivity are illustrated in both direct and indirect methods. Some applications of chiral amino acid and peptide analysis, in particular, regarding the determination of trace enantiomeric impurities, are given. This review selects more than 200 articles published between 1988 and 1999.

Enantiomer separation of chiral pharmaceuticals by capillary electrochromatography

Enantiomer separation of chiral pharmaceuticals by capillary electrochromatography (CEC) is achieved with open-tubular capillaries (o-CEC), with packed capillaries (p-CEC) or with monolithic capillaries. In o-CEC, capillaries are coated with a thin film containing cyclodextrin derivatives, cellulose, proteins, poly-terguride or molecularly imprinted polymers as chiral selectors. In p-CEC, typical chiral HPLC stationary phases such as silica-bonded cyclodextrin or cellulose derivatives, proteins, glycoproteins, macrocyclic antibiotics, quinine-derived and 'Pirkle' selectors, polyacrylamides and molecularly imprinted polymers are used as chiral selectors. Chiral monolithic stationary phases prepared by in situ polymerization into the capillary were also developed for electrochromatographic enantiomer separation.

Study of physically absorbed stationary phases for open tubullar capillary electrochromatography

A novel method based on the adsorption of positively charged compounds on the wall of a fused-silica capillary was applied to prepare stationary phases for open tubular capillary electrochromatography (OTCEC). The positively charged substances including cationic surfactant such as cetyltrimethylammonium bromide (CTAB) and basic chiral selectors such as protein, peptide and amino acid were physically adsorbed onto the capillary wall under specially selected conditions. The adsorbed stationary phase of CTAB was used to separate neutral compounds, while the others were used for chiral separations. The run-to-run reproducibility of retention time was rather good with relative standard deviation (RSD) values of less than 2.3%. The separation efficiency was excellent with the highest theoretical plate number of up to 590000/m and the average one above 250000/m. Stored at 2-8 degrees C in the refrigerator, the adsorbed stationary phase can last at least one month. It was observed that the UV spectra for the enantiomers are significantly different due to the diastereomeric interactions of enantiomers with the chiral stationary phase in the detection window. With the use of the same capillary, the same instrument, and the same mobile phase, the superiority of OTCEC over open tubular liquid chromatography (OTLC) and capillary zone electrophoresis (CZE) was illustrated.