Recent innovations in enantiomer separation by electrochromatography utilizing modified cyclodextrins as stationary phases

Computer simulation of the isotachophoretic migration and separation of norpseudoephedrine stereoisomers with a free or immobilized neutral chiral selector

A detailed computer simulation study of the isotachophoretic migration and separation of norpseudoephedrine stereoisomers for cases with the neutral selector added to the leader, immobilized to the capillary wall or support, or partially present in the separation column is presented. The electrophoretic transport of the analytes from the sampling compartment into the separation medium with the selector, the formation of a transient mixed zone, the separation dynamics of the stereoisomers with a free or immobilized selector, the dependence of the leader pH, the ionic mobility of norpseudoephedrine, the complexation constant and selector immobilization on steady-state plateau zone properties, and zone changes occurring during the transition from the chiral environment into a selector free leader are thereby visualized in a hitherto unexplored way. For the case with the selector dissolved in the leading electrolyte, simulation data are compared to those observed in experimental setups with coated fused-silica capillaries that feature minimized electroosmosis and zone detection with conductivity and absorbance detectors.

Cyclodextrin-mediated enantioseparations by capillary electrochromatography

Immobilized cyclodextrin derivatives are used as chiral selectors in various modes of capillary electrochromatography (CEC). The present chapter describes three techniques in detail utilizing CDs in CEC: (1) open-tubular capillary electrochromatography (o-CEC), (2) packed capillary electrochromatography (p-CEC), and (3) monolithic capillary electrochromatography (rod-CEC). Nanoparticle pseudostationary phase capillary electrochromatography (psp-CEC) is briefly discussed.

Fabrication and characterization of open-tubular CEC modified with tentacle-type metal-chelating polymer chains

A novel stationary phase with tentacle-type metal-chelating polymer chains was fabricated for open-tubular CEC. The preparation procedure of the stationary phase included the synthesis of monomer, silanization of capillary inner wall, in situ polymerization, and metal complexation. The effects of initiator concentration and reaction time on the column capacity were investigated. To compare with the tentacle-type metal-chelating capillary column, a monolayer ligand-modified capillary was also prepared. Immobilized copper(II) capacity of the tentacle-type polymer stationary phase was nearly 900 times higher than that of the monolayer one. The electroosmotic mobility was examined for its dependence on pH as well as phosphate and ACN concentrations. The tentacle-type metal-chelating capillary with high ligand capacity has proven to afford better retention and resolution for the separation of phenylalanine, tryptophan, and tyrosine mixtures and three purine derivatives. The separation was considered to be effected by a combination of ligand exchange and electrophoretic mobility.

Delta-cyclodextrin as novel chiral probe for enantiomeric separation by electromigration methods

Native delta-CD has been employed as chiral selector in CE and MEKC. To investigate the potential of the enantiodiscriminating properties of delta-CD, negatively charged 5-dimethylamino-1-naphthalene-sulfonyl (dansyl)-, 2,4-dinitrophenyl (DNP)- and FMOC-derivatives of several amino acids, 1,1'-binaphthyl-2,2'-diylhydrogenphosphate, flavanones and three positively charged drugs have been selected as testing samples. Enantioresolution factors up to 4.82 have been observed. The results were compared with those achieved by the conventional running buffer additives alpha-, beta- and gamma-CDs. For several examples a steady increase of enantioresolution with increasing degree of oligomerization has been detected.

Chiral capillary electrophoretic separation of amino acids derivatized with 9-fluorenylmethylchloroformate using mixed chiral selectors of beta-cyclodextrin and sodium taurodeoxycholate

Chiral separation of 19 pairs of amino acid (AA) enantiomers derivatized with 9-fluorenylmethylchloroformate (FMOC) was successfully conducted by capillary electrophoresis using the mixture of beta-CD and sodium taurodeoxycholate (STDC) as selectors. Resolution was considerably superior to that obtained by using either beta-CD or STDC alone. After a systematic inspection, a buffer composed of 150 mM borate and 18% v/v isopropanol at pH 8.0, dissolved with 30 mM beta-CD and 30 mM STDC, was adopted and able to generate baseline resolution (>1.50) for 17 pairs of FMOC-AA enantiomers and somewhat lower resolution for arginine (1.36) and alanine (1.18), respectively. Experimental data revealed that the addition of the second selector did not increase the mobility difference between a pair of enantiomers (Delta mu = mu(D) - mu(L) and the number of theoretical plates (N), but decreased the summed apparent mobility of a pair of enantiomers (Sigma mu = mu(D) - mu(L)), which was mainly due to the decrease of the electroosmotic flow. The variation of Sigma mu was thus the major reason responsible for the improvement of chiral resolution in this study. The result demonstrated that not only the intrinsic selectivity of the selectors was the basis of the chiral separation, but also the non-chiral effect of the selectors, the change of the electroosmotic flow, was an important factor in enhancing the enantioseparation resolution. This study could probably help to explain the reasons for resolution improvement in some dual selectors systems, which are not very clear at present.

Perphenylcarbamoylated β-cyclodextrin bonded-silica particles as chiral stationary phase for enantioseparation by pressure-assisted capillary electrochromatography

Perphenylcarbamoylated beta-cyclodextrin bonded-silica particles (5 microm) were packed into 75-mum fused-silica capillaries, and used for the enantiomer separation of neutral and basic solutes by pressure-assisted capillary electrochromatography. Triethylammonium acetate and phosphate buffer were employed as the BGEs. A cathodic EOF was observed with these two BGEs. Seven chiral analytes were successfully resolved into their enantiomers under optimized conditions, and five of them could be baseline-separated within 12 min due to their high electrophoretic mobility. Better results were achieved with phosphate buffer as the BGE. The effects of organic content and pH on the enantioseparation were also investigated.

Chiral separation principles in chromatographic and electromigration techniques

Almost half of the drugs in use today are chiral. It is well established that the pharmacological activity is mostly restricted to one of the enantiomers (eutomer). There can be qualitative and quantitative differences in the activity of the enantiomers. In many cases, the inactive enantiomer (distomer) shows unwanted side effects or even toxic effects. Even if the side effects are not that drastic, the distomer has to be metabolized and this represents an unnecessary burden for the organism. Therefore, the development of methods for the separation of enantiomers, both on analytical and preparative scale, has become increasingly important. Chromatographic techniques such as thin layer chromatography (TLC), gas chromatography (GC), supercritical fluid chromatography (SFC), and above all high-performance liquid chromatography (HPLC) have been used for enantiomer separation for about two decades. More recently, electromigration techniques, such as capillary electrophoresis and capillary electrochromatography, have been shown to be powerful alternatives to chromatographic methods. This review gives a short overview of different chiral separation principles and their application. Several new developments are discussed.

Comparison of monolithic approaches for enantioselective capillary electrochromatography involving cyclodextrins

The access to CD-modified monoliths for enantiomeric separation by CEC can be divided into two main approaches. (i) Silica-based monoliths, prepared by either a sol-gel process or by sintering of silica particles, are modified after fabrication by coating with a CD selector. Alternatively the fusion of CD functionalized silica particle via gluing is feasible. (ii) Rigid or homogeneous organic polymer-based monoliths, prepared by polymerization of organic monomers in the presence of a porogen, are modified with the CD selector either by copolymerization or by physical incorporation into the continuous bed.

Metallomesogenic stationary phase for open-tubular capillary electrochromatography

A synthetic coppermesogenic polymer is prepared and then covalently bonded to the siloxane-based deactivated column as the stationary phases of open-tubular CEC with essentially high phase ratio. The EOF generated from the modified phase is surveyed through conventional aqueous buffers and hydroorganic mobile phases. Zeta potentials, which are computed from the EOF data and the ratio of dielectric constant to viscosity, are plotted as a function of pH, ionic molarity, and compositional range. These plots responsible for the electroosmotic characteristic of the bonded phases are found to be like those of bare fused-silica or deactivated columns through decreasing or increasing the ACN content in the mobile phase, respectively. This two-phase characteristic is basically derived from the polymeric configuration with carboxylato ligands attached onto the polysiloxane backbone. Phthalates and amino acids are suitable probes to examine the two phenomena, more-polar and less-polar mediums, respectively, and to judge whether the chromatographic retention is the major source of separation mechanism. With the mixing modes of Lewis acid-base interaction, dispersive force, and shape discrimination, the chromatographic partition adequately accomplishes the uneasily resolved separations by only CZE mode, although the electrophoretic migration is truly somewhat involved.

Sensitive chiral analysis by capillary electrophoresis

In this review, an updated view of the different strategies used up to now to enhance the sensitivity of detection in chiral analysis by CE will be provided to the readers. With this aim, it will include a brief description of the fundamentals and most of the recent applications performed in sensitive chiral analysis by CE using offline and online sample treatment techniques (SPE, liquid-liquid extraction, microdialysis, etc.), on-column preconcentration techniques based on electrophoretic principles (ITP, stacking, and sweeping), and alternative detection systems (spectroscopic, spectrometric, and electrochemical) to the widely used UV-Vis absorption detection.

Enantiomeric separation by capillary electrochromatography using monolithic capillaries with sol-gel-glued cyclodextrin-modified silica particles

By an on-column sol-gel process, a chiral monolithic stationary phase was prepared by the fusion of permethyl-beta-cyclodextrin-silica (Chira-Dex-silica) particles and by linking them to the internal capillary wall. The resulting monolith is stable toward voltage (30 kV) and pressure (300 bar) and possesses a high efficiency (up to 100,000 theoretical plates per meter). Efficient enantiomeric separation of various chiral compounds by pressure-supported capillary electrochromatography (CEC) was achieved. When comparing this method to capillary liquid chromatography (LC) employing the same column in an unified equipment, CEC shows a twofold higher column efficiency at comparable elution times and hence better resolution factors.

Contributions to the theory and practice of the chromatographic separation of enantiomers

The theory and practice of enantioselective capillary chromatography employing metal coordination compounds and modified cyclodextrins as chiral stationary phases are treated. A unified approach involving all contemporary chromatographic methods and a single enantioselective column is described. Reliable thermodynamic data of enantioselectivity are derived by the retention-increment method. The existence of an isoenantioselective temperature is demonstrated. Kinetic enantiomerization studies are presented. The preparative-scale separation of enantiomers by gas chromatography with enantioselective packed columns is achieved. Unusual phenomena and future aspects of enantioselective chromatography are discussed.

Enantiomer separations on a vancomycin stationary phase and retention mechanism of pressurized capillary electrochromatography

Several chiral drugs, promethazine, carteolol, celiprolol, and albuterol, were resolved with vancomycin as the chiral stationary phase by pressurized capillary electrochromatography (pressurized CEC) and capillary HPLC. The effects of pressure and electrical field strength on efficiency, resolution, and capacity factor in pressurized CEC were investigated. A mathematical model describing the relationship of capacity factor in pressurized CEC with voltage, pressurized flow velocity, electroosmotic mobility, and electrophoretic mobility was established, which was in good agreement with the experimental data.

Application of diaza-18-crown-6-capped beta-cyclodextrin bonded silica particles as chiral stationary phases for ultrahigh pressure capillary liquid chromatography

Two bonded chiral stationary phases (CSPs), 8-aminoquinoline-2-ylmethyl- and 8-aminoquinoline-7-ylmethyl-diaza-18-crown-6-capped [3-(2-O-beta-cyclodextrin)-2-hydroxypropoxy]propylsilyl silica particles (non-porous, 1.5 microm), have been prepared and evaluated using capillary liquid chromatography at high pressures (> or = 8000 p.s.i.). High column efficiency (up to 400 000 plates m(-1)) was achieved for chiral separations. These CSPs with two recognition sites, i.e. substituted-diaza-18-crown-6 and beta-cyclodextrin combined with high chromatographic efficiency provide good resolution of a variety of enantiomers and positional isomers in relatively short times under reversed-phase conditions. After inclusion of a Ni (II) ion from the mobile phase, the positively charged crown ether-capped beta-cyclodextrin facilitates specific static, dipolar, and host-guest complexation interactions with solutes.

Fast enantioseparation of arylglycine amides by capillary electrophoresis with highly sulfated-beta-cyclodextrin as a chiral selector

Nine racemic arylglycine amides were synthesized and successfully enantioseparated by capillary electrophoresis (CE) using highly sulfated beta-cyclodextrin (HS-beta-CD) as a chiral selector. Baseline enantioseparation of the analytes was obtained around neutral pH but not in the acidic conditions that are commonly used. HS-beta-CD content, buffer pH, type and concentration, and organic modifier concentration were studied and optimized for fast and efficient separation. A chiral CE separation system composed of 1.5% (w/v) HS-beta-CD, 0 to 10% (v/v) methanol and 20 mM 3-(N-morpholino)propanesulfonic acid at pH 6.5 was shown suitable for baseline enantioseparation of the mentioned amides within 6 min, including simultaneous enantioseparation of three positional isomer series (methyl-, methoxyl or chloro-substituted). By using this system, D-enantiomers migrated ahead of the L-enantiomers and the enantiomeric resolution order of arylglycine amides was more or less parallel to the pK(a), order of the analytes.

Application of cyclam-capped beta-cyclodextrin-bonded silica particles as a chiral stationary phase in capillary electrochromatography for enantiomeric separations

Two novel types of substituted cyclam-capped beta-cyclodextrin (beta-CD)-bonded silica particles have been prepared and used as chiral stationary phases in capillary electrochromatography (CEC). The two stationary phases have a chiral selector with three recognition sites: beta-CD, cyclam, and the latter's sidearm. They exhibit excellent enantioselectivities in CEC for a wide range of compounds as a result of the cooperative functioning of the anchored beta-CD and cyclam. After inclusion of the metal ion (Ni2+) from the running buffer into the substituted cyclams and their sidearm ligands, the bonded stationary phases become positively charged and can provide extra electrostatic interactions with ionizable solutes and enhance the dipolar interactions with some polar neutral solutes. This enhances the host-guest interaction with some solutes and improves chiral recognition and enantioselectivity. These new types of stationary phases exhibit great potential for fast chiral separations in CEC.

Methods for biocatalyst screening

Biocatalysts are now widely accepted as useful alternative tools to classic organic synthetic techniques for the regio- and enantioselective synthesis under mild reaction conditions in many fields of chemistry. The development of techniques for the rational or evolutionary design of novel or modified enzymes has increased the need for fast and reliable methods for the identification of the most powerful catalysts. We present a short overview on screening techniques in this area. Beside classical methods such as spectrophotometry and fluorimetry, a number of new approaches like methods based on the measurement of pH changes or IR-thermography have been recently developed. Additionally the use of electrospray and matrix-assisted laser desorption/ionization mass spectrometry has gained increasing influence in this field of biotechnology.

Selected fundamental aspects of chiral electromigration techniques and their application to pharmaceutical and biomedical analysis

While capillary electrophoresis has been established as a major enantioseparation technique within the last decade, the potential of capillary electrochromatography is still studied extensively. This review summarizes recent applications of electromigration techniques with regard to the enantioseparation of chiral drugs. The first part discusses the general aspects of migration models and the enantiomer migration order. The application of capillary electrophoresis to chiral pharmaceutical analysis considers recent literature on: (1) chiral resolutions of non-racemic mixtures of enantiomers for the development of assays and the determination of the stereochemical purity of the drugs, (2) chiral separations of compounds in pharmaceutical formulations and products, and (3) enantioseparations of drugs in biological samples. A shorter section devoted to chiral electrochromatography discusses some fundamental aspects as well as the application to the chiral analysis of drugs including bioanalysis.

Recent applications of capillary electrochromatography

A review is presented of the most important recent applications of capillary electrochromatography (CEC) for the analysis of acidic, basic, and neutral compounds, of biomolecules, environmental substances, natural products, pharmaceuticals, and chiral compounds. Packed-column CEC (packed-CEC), open-tubular (OT-CEC), as well as pressure-assisted CEC (pseudo-CEC) are hereby considered. Papers published between July 1999 and April 2001 were taken into account. Applications before July 1999 have been reviewed in Electrophoresis 1999, 20, 3027-3065.

Chiral separation by chromatographic and electromigration techniques. A review

This review gives a survey of different chiral separation principles and their use in high-performance liquid chromatography (HPLC), gas chromatography (GC), supercritical fluid chromatography (SFC), thin-layer chromatography (TLC), capillary electrophoresis (CE) and capillary electrochromatography (CEC) highlighting new developments and innovative techniques. The mechanisms of the different separation principles are briefly discussed and some selected applications are shown.

Recent developments in chiral capillary electrophoresis and applications of this technique to pharmaceutical and biomedical analysis

This paper provides an overview of the current status of chiral capillary electrophoresis (CE). The emphasis is placed on the application of CE in chiral separation of various racemic compounds. During the last two years about 280 papers, several review articles, and two entire issues, edited by S. Fanali (Electrophoresis 1999, 20, 2577-2798, and H. Nishi and S. Terabe (J. Chromatogr. A 2000, 879, 1-471.) have been devoted to chiral CE. Enantiomeric separations of various compounds, e.g., pharmaceuticals, drug candidates, drugs and related metabolites in biological fluids, amino acids, di- and tri peptides, pesticides and fungicides, have been performed using different chiral selectors. Native and derivatized cyclodextrins continue to be the most widely used chiral selectors. Other chiral selectors such as natural and synthetic chiral micelles, crown ethers, chiral ligands, proteins, oligo- and polysaccharides, and macrocyclic antibiotics have also been applied to chiral CE separations.

Enantioseparations by capillary electrochromatography

The review summarizes recent developments in enantioseparations by capillary electrochromatography (CEC). Selected fundamental aspects of CEC are discussed in order to stress those features which may allow the success of this technique in the competitive field of enantioseparations. In addition, the comparative characteristics of the different modes of chiral CEC and the stationary phases are presented. The effects of the characteristics of the stationary and liquid phases and operational conditions on the separation results are discussed. Finally, some future trends are briefly addressed.

Separation of enantiomers by open capillary electrochromatography on polysiloxane-bonded permethyl-beta-cyclodextrin

The separation of enantiomers by open capillary electrochromatography (o-CEC) using Chirasil-Dex as chiral stationary phase (CSP) is reviewed. In Chirasil-Dex, permethylated beta-cyclodextrin is linked via a single octamethylene spacer to polydimethylsiloxane. The CSP is coated and thermally immobilized onto the internal surface of a fused-silica column (i.d. 50 microm). Employing a single open-tubular column coated with Chirasil-Dex, a unified enantioselective approach can be realized using the four common chromatographic techniques: o-GC, o-SFC, o-LC and o-CEC. The chiral stationary phase Chirasil-Dex can be combined with a charged cyclodextrin derivative, which is added into the mobile phase. In the resulting dual chiral recognition system, enhancement of enantioselectivity (matched case) or compensation of enantioselectivity (mismatched case) are observed. The overall enantioselectivity is dependent on the sense of enantioselectivity of the selectors chosen and their influence on the electrophoretic and electroosmotic migration of the enantiomers of a selectand. The feasibility to couple chiral o-CEC and ESI/MS is demonstrated for trace analysis of enantiomeric drugs in body fluids.

Enantiomer separation by nonaqueous and aqueous capillary electrochromatography on cyclodextrin stationary phases

Native beta- and gamma-cyclodextrin bound to silica (ChiraDex-beta and ChiraDex-gamma) were packed into capillaries and used for enantiomer separation by capillary electrochromatography (CEC) under aqueous and nonaqueous conditions. Negatively charged analytes (dansyl-amino acids) were resolved into their enantiomers by nonaqueous CEC (NA-CEC). The addition of a small amount of water to the nonaqueous mobile phase enhanced the enantioselectivity but increased the elution time. The choice of the background electrolyte (BGE) determined the direction of the electroosmotic flow (EOF). With 2-(N-morpholino) ethanesulfonic acid (MES) or triethylammonium acetate (TEAA) as BGE an inverse EOF (anodic EOF) was observed while with phosphate a cathodic EOF was found. The apparent pH (pH*), the concentration of the BGE, and the nature of the mobile phase strongly influenced the elution time, the theoretical plate number and the chiral separation factor of racemic analytes.

Separation of enantiomers by gas chromatography

The separation of enantiomers by gas chromatography is performed on chiral stationary phases (CSPs) via hydrogen bonding, coordination and inclusion. Thus, typical chiral selectors are amino acid derivatives, terpene-derived metal coordination compounds and modified cyclodextrins. In Chirasil-type stationary phases the chiral selector is anchored to a polysiloxane backbone improving gas chromatographic performance. The present review article describes the state-of-the-art, scope and limitations, applications and mechanistic considerations at the advent of the millennium incorporating 16 figures and 168 references.

Enantioseparations in capillary electromigration techniques: recent developments and future trends

This review summarizes the current status of enantioseparations using capillary electromigration techniques and gives the authors insights on the selected fundamental aspects and future trends in this field. The most recent developments in the field of chiral separations using capillary electrophoresis (CE) and capillary electrochromatography (CEC) are summarized. The status of chiral electromigration techniques is evaluated tacking into account the most recent developments in related techniques such as chiral HPLC, GC and SFC.

Recent progress in capillary electrochromatography

Capillary electrochromatography (CEC) continues to captivate many separation scientists. A remarkable activity is apparent from the numerous publications in the literature using CEC. A review of the most recent progress in CEC is presented herein, covering an extensive fraction of the literature on CEC published from the year 1997 until the beginning of 2000. Most of the recent developments have concentrated on column technology.

Recent progress in enantiomer separation by capillary electrochromatography

Enantiomer separation by electrochromatography (CEC) can be performed in three modes: (i) open-tubular capillary electrochromatography (o-CEC), in which the chiral selector is physically adsorbed coated, and thermally immobilized or covalently attached to the internal capillary wall; (ii) packed capillary electrochromatography (p-CEC), in which the capillary is either filled with chiral modified silica particles or with an achiral packing material, and a chiral selector is added to the mobile phase; and (iii) monolithic (rod)-capillary electrochromatography (rod-CEC) in which the chiral stationary phase (CSP) consists of a single piece of porous solid. We present an overview on methods and new trends in the field of electrochromatographic enantiomer separation such as CEC with either nonaqueous mobile phases or stationary phases with incorporated permanent charges, or with packing beds consisting of nonporous silica particles or particles with very small internal diameters.

Recent progress in chiral separation principles in capillary electrophoresis

This review summarizes recent developments in the field of chiral separations by electromigration techniques including capillary zone electrophoresis (CZE), capillary gel electrophoresis (CGE), isotachophoresis (ITP), electrokinetic chromatography (EKC), and capillary electrochromatography (CEC). This overview focuses on the development of new chiral selectors and the introduction of new techniques rather than applications of already established selectors and methods. The mechanisms of the different chiral separation principles are discussed.