Improving Escherichia coli alkaline phosphatase efficacy by additional mutations inside and outside the catalytic pocket

Design of ancestral mammalian alkaline phosphatase bearing high stability and productivity

Mammalian alkaline phosphatase (AP) is widely used in diagnostics and molecular biology but its widespread use is impaired because it is difficult to express in Escherichia coli and has low thermostability. To overcome these challenges, we employed sequence-based protein redesign methods, specifically full consensus design (FCD) and ancestral sequence reconstruction (ASR), to create APs with enhanced properties. Biochemical analyses revealed that these newly designed APs exhibited improved levels of expression in their active form and increased thermostability compared to bovine intestinal AP isozyme II (bIAPII), without impeding enzymatic activity. Notably, the activity in culture broth of the designed APs was an order of magnitude higher than that of bIAPII, and their thermal stability increased by 13°C-17°C (measured as T50). We also assessed 28 single-point mutants of bIAPII to identify regions influencing thermostability and expression level; these mutations were common in the engineered APs but not in bIAPII. Specific mutations, such as T413E and G402S, enhanced thermostability, whereas increasing the expression level required multiple mutations. This suggests that a synergistic effect is required to enhance the expression level. Mutations enhancing thermostability were located in the crown domain, while those improving expression were close to the dimer interface, indicating distinct mechanisms underpinning these enhancements.

IMPORTANCE

Sequence-based protein redesign methods, such as full consensus design (FCD) and ancestral sequence reconstruction (ASR), have the potential to construct new enzymes utilizing protein sequence data registered in a rapidly expanding sequence database. The high thermostability of these enzymes would expand their application in diagnostics and molecular biology. These enzymes have also demonstrated a high level of active expression by Escherichia coli. These characteristics make these APs attractive candidates for industrial application. In addition, different amino acid residues are primarily responsible for thermal stability and active expression, suggesting important implications for strategies for designing enzymes by FCD and ASR.

The critical role of residues Phe120 and Val161 of (2 R,3 R)‑2,3‑butanediol dehydrogenase from Neisseria gonorrhoeae as probed by molecular docking and site-directed mutagenesis

NAD+-dependent (2 R,3 R)‑2,3‑butanediol dehydrogenase (BDH) from Neisseria gonorrhoeae (NgBDH) is a representative member of the medium-chain dehydrogenase/reductase (MDR) superfamily. To date, little information is available on the substrate binding sites and catalytic residues of BDHs from this superfamily. In this work, according to molecular docking studies, we found that conserved residues Phe120 and Val161 form strong hydrophobic interactions with both (2 R,3 R)‑2,3‑butanediol (RR-BD) and meso-2,3‑butanediol (meso-BD) and that mutations of these residues to alanine or threonine impair substrate binding. To further evaluate the roles of these two residues, Phe120 and Val161 were mutated to alanine or threonine. Kinetic analysis revealed that, relative to those of wild type, the apparent KM values of the Phe120Ala mutant for RR-BD and meso-BD increased 36- and 369-fold, respectively; the catalytic efficiencies of this mutant with RR-BD and meso-BD decreased approximately 586- and 3528-fold, respectively; and the apparent KM values of the Val161Ala mutant for RR-BD and meso-BD increased 4- and 37-fold, respectively, the catalytic efficiencies of this mutant with RR-BD and meso-BD decreased approximately 3- and 28-fold, respectively. Additionally, the Val161Thr mutant slightly decreased catalytic efficiencies (twofold with RR-BD; 7.3-fold with meso-BD) due to an increase in KM (sixfold for RR-BD; 24-fold for meso-BD) and a slight increase (2.8-fold with RR-BD; 3.3-fold with meso-BD) in kcat. These findings validate the critical roles of Phe120 and Val161 of NgBDH in substrate binding and catalysis. Overall, the current study provides a better understanding of the substrate binding and catalysis of BDHs within the MDR superfamily.

Heterologous antigen selection of chicken single-chain variable fragments against thiamethoxam

Single-chain variable fragments (scFvs) are valuable in the development of immunoassays for pesticide detection. In this study, scFvs specific to thiamethoxam (Thi) were successfully isolated from a library generated by chicken immunization through heterologous coating selection. These scFvs were subsequently expressed with fusion with an Avi tag and alkaline phosphatase. After combination and optimization, a scFv-biotin based enzyme linked immunosorbent assay (ELISA) was developed for the detection of Thi, demonstrating an impressive half-maximum signal inhibition concentration (IC50) of 30 ng mL-1 and a limit of detection (LOD) of 1.8 ng mL-1. The immunoassay exhibited minimal cross-reactivity with other neonicotinoid insecticides, except for 7.5% for imidacloprid and 6.7% for imidaclothiz. The accuracy of the assay was confirmed by testing spiked samples of apple, pear, cabbage, and cucumber, which resulted in average recoveries ranging between 82% and 119%, closely aligning with the results obtained through high-performance liquid chromatography. Therefore, the chicken scFv-biotin based assay showed promise as a high-throughput screening tool for Thi in agricultural samples.

Comparative Analysis of NanoLuc Luciferase and Alkaline Phosphatase Luminescence Reporter Systems for Phage-Based Detection of Bacteria

Reporter phage assays are a promising alternative to culture-based assays for rapidly detecting viable bacteria. The reporter systems used in phage-based detection are typically enzymes and their corresponding substrates that provide a signal following infection and expression. While several reporter systems have been developed, comparing reporter systems based on reported bacteria detection limits from literature can be challenging due to factors other than the reporter system that influence detection capabilities. To advance the development of phage-based assays, a systematic comparison and understanding of the components are necessary. The objective of this study was to directly compare two common enzyme-mediated luminescence reporter systems, NanoLuc/Nano-Glo and alkaline phosphatase (ALP*)/DynaLight, for phage-based detection of bacteria. The detection limits of the purified enzymes were determined, as well as the expression levels and bacteria detection capabilities following engineering of the coding genes into T7 phage and infection of E. coli BL21. When comparing the sensitivity of the purified enzymes, NLuc/Nano-Glo enzyme/substrate system demonstrated a lower detection limit than ALP*/DynaLight. In addition, the expression of the NLuc reporter following phage infection of E. coli was greater than ALP*. The lower detection limit combined with the higher expression resulted in a greater than 100-fold increase in sensitivity for the NLuc/Nano-Glo^® reporter system compared to ALP*/DynaLight when used for the detection of E. coli in a model system. These findings provide a comparative analysis of two common reporter systems used for phage-based detection of bacteria and a foundational understanding of these systems for engineering future reporter phage assays.

Developing of specific monoclonal recombinant antibody fused to alkaline phosphatase (AP) for one-step detection of fig mosaic virus

Present study was performed to develop a fusion recombinant monoclonal antibody for one-step and accurate detection of FMV with a specific single-chain variable fragment (scFv) fused to alkaline phosphatase (AP) named as scFv(FMV-NP)-AP. The gene encoding-specific scFv recombinant antibody binding to nucleocapsid protein of Fig Mosaic Virus (FMV-NP) was fused to upstream of AP gene and integrated in pET26b bacterial expression vector. As vector contain pelB signal peptide, the expressed protein is secreted into periplasmic compartment. Recombinant fusion protein was produced in transformed E. coli following induction by IPTG. Extraction and purification of fusion protein was performed under denatured condition. The results of SDS-PAGE and western blot analysis indicated high integrity and purity with a single band protein with expected size of 72 kDa. The total yield of purified scFv(FMV-NP)-AP fusion protein estimated around 0.5-1 mg/l cultured medium. Subsequent colorimetric analysis confirmed presence of alkaline phosphatase activity in prepared scFv-AP fusion protein. Specificity of generated recombinant fusion antibody against cognate antigen and the native virus presented in infected plant extracts was assessed by ELISA, western blot and dot blot assays. Results revealed that scFv(FMV-NP)-AP is able to detect the presence of FMV in infected fig plants. The novel approach, implementing specific recombinant fusion antibody developed in this research, leads to one-step detection of FMV in plants by avoiding the use of chemical enzyme-labeled secondary antibodies.

Generation of functional single-chain fragment variable from hybridoma and development of chemiluminescence enzyme immunoassay for determination of total malachite green in tilapia fish

To determine malachite green (MG) and its major metabolite, leucomalachite green (LMG) residual levels in tilapia fish, chemiluminescent enzyme immunoassay (CLEIA) was developed based on a single-chain variable fragment (scFv)-alkaline phosphatase (AP) fusion protein. At first, V_H and V_L gene sequences were cloned from hybridoma cell lines secreting monoclonal antibody against LMG, and then thoroughly by database-assisted sequence analysis. Finally, the productive V_H and V_L were assembled to an intact scFv sequence and engineered to produce scFv-AP fusion protein. The fusion protein was further identified as a bifunctional reagent for immunoassay, then a sensitive one-step CLEIA against LMG was developed with a half-maximal inhibitory concentration (IC₅₀) and limit of detection (LOD) of 1.3 and 0.04 ng/mL, respectively. The validation results of this novel competitive CLEIA was in line with those obtained by classical HPLC method for determination of total MG in spiked and field incurred samples.

Screening Antibody Libraries with Colony Assay Using scFv-Alkaline Phosphatase Fusion Proteins

Screening antibody libraries is an important step in establishing recombinant monoclonal antibodies. The colony assay can identify positive clones without almost any false-positives; however, its antibody library is smaller than those used in other recombinant screening methods such as phage display. Thus, to improve the efficiency of colony assays, it is necessary to increase library size per screening. Here, we report developing a colony assay with single-chain variable fragment (scFv) fused to the N-terminus of bacterial alkaline phosphatase (scFv-PhoA). The scFv-PhoA library was constructed in an expression vector specifically designed for this study. Use of this library allowed the successful and direct detection of positive clones exhibiting PhoA activity, without the need for a secondary antibody. Colony assay screening with scFv-PhoA is simple, rapid, offers a higher success rate than previous methods based on scFv libraries, and—most importantly—it enables high-throughput procedures.

A rapid and simple fluorescence enzyme-linked immunosorbent assay for tetrabromobisphenol A in soil samples based on a bifunctional fusion protein

Tetrabromobisphenol A (TBBPA) is the largest brominated flame retardant which can be released to environment and cause long-term hazard. In this work, we developed a rapid and highly sensitive fluorescence enzyme-linked immunosorbent assay (FELISA) for monitoring of TBBPA in soil samples. TBBPA specific nanobody derived from camelid was fused with alkaline phosphatase to obtain the bi-functional fusion protein, which enable the specific binding of TBBPA and the generation of detection signal simultaneously. The assay showed an IC₅₀ of 0.23 ng g^-1, limit detection of 0.05 ng g^-1 and linear range from 0.1 to 0.55 ng g^-1 for TBBPA in soil samples. Due to the high resistance to organic solvents of the fusion protein, a simple pre-treatment by using 40% dimethyl sulfoxide (DMSO) as extract solvent can eliminate matrix effect and obtain good recoveries (ranging from 93.4% to 112.4%) for spiked soil samples. Good relationship between the results of the proposed FELISA and that of liquid chromatography tandem mass spectrometry (LC-MS/MS) was obtained, which indicated it could be a powerful analytical tool for determination of TBBPA to monitor human and environmental exposure.

Enhancing subtilisin thermostability through a modified normalized B-factor analysis and loop-grafting strategy

Rational design-guided improvement of protein thermostability typically requires identification of residues or regions contributing to instability and introduction of mutations into these residues or regions. One popular method, B-FIT, utilizes B-factors to identify unstable residues or regions and combines them with other strategies, such as directed evolution. Here, we performed structure-based engineering to improve the thermostability of the subtilisin E-S7 (SES7) peptidase. The B-value of each residue was redefined in a normalized B-factor calculation, which was implemented with a refined bioinformatics analysis strategy to identify the critical area (loop 158-162) related to flexibility and to screen for suitable thermostable motif sequences in the Protein Data Bank that can act as transplant loops. In total, we analyzed 445 structures and identified 29 thermostable motifs as candidates. Using these motifs as a starting point, we performed iterative homologous modeling to obtain a desirable chimera loop and introduced five different mutations into this loop to construct thermostable SES7 proteins. Differential scanning fluorimetry revealed increases of 7.3 °C in the melting temperature of an SES7 variant designated M5 compared with the WT. The X-ray crystallographic structure of this variant was resolved at 1.96 Å resolution. The crystal structure disclosed that M5 forms more hydrogen bonds than the WT protein, consistent with design and molecular dynamics simulation results. In summary, the modified B-FIT strategy reported here has yielded a subtilisin variant with improved thermostability and promising industrial applications, supporting the notion that this modified method is a powerful tool for protein engineering.

An [FeIII 34 ] Molecular Metal Oxide

The dissolution of anhydrous iron bromide in a mixture of pyridine and acetonitrile, in the presence of an organic amine, results in the formation of an [Fe₃₄] metal oxide molecule, structurally characterised by alternate layers of tetrahedral and octahedral Fe^III ions connected by oxide and hydroxide ions. The outer shell of the complex is capped by a combination of pyridine molecules and bromide ions. Magnetic data, measured at temperatures as low as 0.4 K and fields up to 35 T, reveal competing antiferromagnetic exchange interactions; DFT calculations showing that the magnitudes of the coupling constants are highly dependent on both the Fe‐O‐Fe angles and Fe−O distances. The simplicity of the synthetic methodology, and the structural similarity between [Fe₃₄], bulk iron oxides, previous Fe^III–oxo cages, and polyoxometalates (POMs), hints that much larger molecular Fe^III oxides can be made.

Catalytic Biosensors from Complex Coacervate Core Micelle (C3M) Thin Films

Enzymes have been applied to a variety of industrially and medically relevant chemistries as both catalysts and sensors. Incorporation of proteins and enzymes into complex coacervates has been demonstrated to improve the thermal, chemical, and temporal stability of enzymes in solution. In this work, a neutral-cationic block copolymer and an enzyme, alkaline phosphatase, are incorporated into complex coacervate core micelles (C3Ms) and coated onto a solid substrate to create a biocatalytic film from aqueous solution. The incorporation of photo-cross-linkable groups into the neutral block of the polymer allows the film to be cross-linked under ultraviolet light, rendering it insoluble. The morphology of the film is shown to depend most strongly on the protein loading within the film, while solvent annealing is shown to have a minimal effect. These films are then demonstrated as specific sensors for Zn²⁺ in solution in the presence of other metals, a model reaction for ion-selective heavy metal biosensing useful in environmental monitoring. They are shown to have low leaching and maintain sufficient activity and response for sensing for 1 month after aging under ambient conditions and at 40 °C and 50% relative humidity. The C3M immobilization method demonstrated can be applied to a wide variety of proteins with minimal chemical or genetic modification and could be used for immobilization of charged macromolecules in general to produce a wide variety of thin-film devices.

One-step immunoassay for the insecticide carbaryl using a chicken single-chain variable fragment (scFv) fused to alkaline phosphatase

Immunoassays provide a high-throughput method for monitoring pesticides in foods and the environment. Due to easy generation and capable of being manipulated, chicken single-chain variable fragment (scFv) is attractive in the development of immunoassays for pesticides. Two scFvs (X1 and X2) against the insecticide carbaryl were generated from a chicken immunized with hapten C1 conjugated to keyhole limpet hemocyanin and fused with alkaline phosphatase (AP) to develop a rapid one-step enzyme-linked immunosorbent assay for this pesticide. X2-AP showed higher binding affinity to carbaryl than X1-AP. The X2-AP-based ELISA had a half-maximum signal inhibition concentration of 15 ng mL^-1 and a limit of detection of 1.6 ng mL^-1. This assay showed negligible cross-reactivity with other carbamate pesticides (<0.1%) and low cross-reactivity with 1-naphthol (5%). The average recoveries of carbaryl spiked in soil, apple and pear samples by the one-step assay ranged from 90% to 114% and agreed well with those of high-performance liquid chromatography. The chicken scFv-based assay showed promise as a high-throughput screening tool for carbaryl in environmental and food matrices.

A phage-based assay for the rapid, quantitative, and single CFU visualization of E. coli (ECOR #13) in drinking water

Drinking water standards in the United States mandate a zero tolerance of generic E. coli in 100 mL of water. The presence of E. coli in drinking water indicates that favorable environmental conditions exist that could have resulted in pathogen contamination. Therefore, the rapid and specific enumeration of E. coli in contaminated drinking water is critical to mitigate significant risks to public health. To meet this challenge, we developed a bacteriophage-based membrane filtration assay that employs novel fusion reporter enzymes to fully quantify E. coli in less than half the time required for traditional enrichment assays. A luciferase and an alkaline phosphatase, both specifically engineered for increased enzymatic activity, were selected as reporter probes due to their strong signal, small size, and low background. The genes for the reporter enzymes were fused to genes for carbohydrate binding modules specific to cellulose. These constructs were then inserted into the E. coli-specific phage T7 which were used to infect E. coli trapped on a cellulose filter. During the infection, the reporters were expressed and released from the bacterial cells following the lytic infection cycle. The binding modules facilitated the immobilization of the reporter probes on the cellulose filter in proximity to the lysed cells. Following substrate addition, the location and quantification of E. coli cells could then be determined visually or using bioluminescence imaging for the alkaline phosphatase and luciferase reporters, respectively. As a result, a detection assay capable of quantitatively detecting E. coli in drinking water with similar results to established methods, but less than half the assay time was developed.

Single-Domain Antibodies As Versatile Affinity Reagents for Analytical and Diagnostic Applications

With just three CDRs in their variable domains, the antigen-binding site of camelid heavy-chain-only antibodies (HcAbs) has a more limited structural diversity than that of conventional antibodies. Even so, this does not seem to limit their specificity and high affinity as HcAbs against a broad range of structurally diverse antigens have been reported. The recombinant form of their variable domain [nanobody (Nb)] has outstanding properties that make Nbs, not just an alternative option to conventional antibodies, but in many cases, these properties allow them to reach analytical or diagnostic performances that cannot be accomplished with conventional antibodies. These attributes include comprehensive representation of the immune specificity in display libraries, easy adaptation to high-throughput screening, exceptional stability, minimal size, and versatility as affinity building block. Here, we critically reviewed each of these properties and highlight their relevance with regard to recent developments in different fields of immunosensing applications.

A ten-week biochemistry lab project studying wild-type and mutant bacterial alkaline phosphatase

This work describes a 10-week laboratory project studying wild-type and mutant bacterial alkaline phosphatase, in which students purify, quantitate, and perform kinetic assays on wild-type and selected mutants of the enzyme. Students also perform plasmid DNA purification, digestion, and gel analysis. In addition to simply learning important techniques, students acquire novel biochemical data in their kinetic analysis of mutant enzymes. The experiments are designed to build on students' work from week to week in a way that requires them to apply quantitative analysis and reasoning skills, reinforcing traditional textbook biochemical concepts. Students are assessed through lab reports focused on journal style writing, quantitative and conceptual question sheets, and traditional exams. © 2016 by The International Union of Biochemistry and Molecular Biology, 44(6):555-564, 2016.

Alkaline phosphatase-fused repebody as a new format of immuno-reagent for an immunoassay

Enzyme-linked immunoassays based on an antibody-antigen interaction are widely used in biological and medical sciences. However, the conjugation of an enzyme to antibodies needs an additional chemical process, usually resulting in randomly cross-linked molecules and a loss of the binding affinity and enzyme activity. Herein, we present the development of an alkaline phosphatase-fused repebody as a new format of immuno-reagent for immunoassays. A repebody specifically binding to human TNF-α (hTNF-α) was selected through a phage display, and its binding affinity was increased up to 49 nM using a modular engineering approach. A monomeric alkaline phosphatase (mAP), which was previously isolated from a metagenome library, was genetically fused to the repebody as a signal generator, and the resulting repebody-mAP fusion protein was used for direct and sandwich immunoassays of hTNF-α. We demonstrate the utility and potential of the repebody-mAP fusion protein as an immuno-reagent by showing the sensitivity of 216 pg mL^-1 for hTNF-α in a sandwich immunoassay. Furthermore, this repebody-mAP fusion protein enabled the detection of hTNF-α spiked in a serum-supplemented medium with high accuracy and reproducibility. It is thus expected that a mAP-fused repebody can be broadly used as an immuno-reagent in immunoassays.

Genetic optimization of a bacteriophage-delivered alkaline phosphatase reporter to detect Escherichia coli

A large fraction of foodborne illnesses are linked to (∼46%) leafy green vegetables contaminated by pathogens harbored in agricultural water. To prevent this, accurate point-of-production detection tools are required to identify and quantify bacterial contaminants in produce before consumers are impacted. In this study, a proof-of-concept model was engineered for a phage-based Escherichia coli detection system. We engineered the coliphage T7 to express alkaline phosphatase (ALP) to serve as the signal for E. coli detection. Wild type phoA (T7ALP) and a dominant-active allele, phoA D153G D330N (T7ALP*) was inserted into the T7 genome, with engineered constructs selected by CRISPR-mediated cleavage of unaltered chromosomes and confirmed by PCR. Engineered phages and E. coli target cells were co-incubated for 16 hours to produce lysates with liberated ALP correlated with input cell concentrations. A colorimetric assay used p-nitrophenyl phosphate (pNPP) to demonstrate significant ALP production by T7ALP and T7ALP* compared to the vector control (T7EV) (p≤ 0.05). Furthermore, T7ALP* produced 2.5-fold more signal than T7ALP (p≤ 0.05) at pH 10. Due to the increase in signal for the modified ALP* allele, we assessed T7ALP* sensitivity in a dose-responsive manner. We observed 3-fold higher signal for target cell populations as low as ∼2 × 10(5) CFU mL(-1) (p≤ 0.05 vs. no-phage control).

Engineering bacteriophage for a pragmatic low-resource setting bacterial diagnostic platform

Bacteriophages represent multifaceted building blocks that can be incorporated as substitutes for, or in unison with other detection methods, to create powerful new diagnostics for the detection of bacteria. The ease of phage manipulation, production, and detection speed clearly highlights that there remains unrealized opportunities to leverage these phage-based components in diagnostics amenable to resource-limited settings. The passage of regulations like the Food Safety Modernization act, and the ever increasing extent of global trade and travel, will create further demand for these types of diagnostics. While phage-based diagnostics have begun to entering the market place, further research is needed to ensure the potential benefits of phage-based technologies for public health are fully realized. We are just beginning to explore the possibilities that phage-based detection can offer us in the future. The combination of engineered phages as well as engineered enzymes could result in ultrasensitive detection systems for low-resource settings. Because the reporter enzyme is synthesized in vivo, we need to consider the options outside of normal enzyme reporters. In this case, common enzyme issues such as purification and long-term stability are less important. Phage-based diagnostics were conceptualized from out-of-the box thinking and the evolution of these systems should be as well.

Influence of Electrostatics on Small Molecule Flux through a Protein Nanoreactor

Nature uses protein compartmentalization to great effect for control over enzymatic pathways, and the strategy has great promise for synthetic biology. In particular, encapsulation in nanometer-sized containers to create nanoreactors has the potential to elicit interesting, unexplored effects resulting from deviations from well-understood bulk processes. Self-assembled protein shells for encapsulation are especially desirable for their uniform structures and ease of perturbation through genetic mutation. Here, we use the MS2 capsid, a well-defined porous 27 nm protein shell, as an enzymatic nanoreactor to explore pore-structure effects on substrate and product flux during the catalyzed reaction. Our results suggest that the shell can influence the enzymatic reaction based on charge repulsion between small molecules and point mutations around the pore structure. These findings also lend support to the hypothesis that protein compartments modulate the transport of small molecules and thus influence metabolic reactions and catalysis in vitro.

Prediction of distal residue participation in enzyme catalysis

A scoring method for the prediction of catalytically important residues in enzyme structures is presented and used to examine the participation of distal residues in enzyme catalysis. Scores are based on the Partial Order Optimum Likelihood (POOL) machine learning method, using computed electrostatic properties, surface geometric features, and information obtained from the phylogenetic tree as input features. Predictions of distal residue participation in catalysis are compared with experimental kinetics data from the literature on variants of the featured enzymes; some additional kinetics measurements are reported for variants of Pseudomonas putida nitrile hydratase (ppNH) and for Escherichia coli alkaline phosphatase (AP). The multilayer active sites of P. putida nitrile hydratase and of human phosphoglucose isomerase are predicted by the POOL log ZP scores, as is the single-layer active site of P. putida ketosteroid isomerase. The log ZP score cutoff utilized here results in over-prediction of distal residue involvement in E. coli alkaline phosphatase. While fewer experimental data points are available for P. putida mandelate racemase and for human carbonic anhydrase II, the POOL log ZP scores properly predict the previously reported participation of distal residues.

One-step immunoassay for tetrabromobisphenol a using a camelid single domain antibody-alkaline phosphatase fusion protein

Tetrabromobisphenol A (TBBPA) is a ubiquitous brominated flame retardant, showing widespread environmental and human exposures. A variable domain of the heavy chain antibody (VHH), naturally occurring in camelids, approaches the lower size limit of functional antigen-binding entities. The ease of genetic manipulation makes such VHHs a superior choice to use as an immunoreagent. In this study, a highly selective anti-TBBPA VHH T3-15 fused with alkaline phosphatase (AP) from E. coli was expressed, showing both an integrated TBBPA-binding capacity and enzymatic activity. A one-step immunoassay based on the fusion protein T3-15-AP was developed for TBBPA in 5% dimethyl sulfoxide (DMSO)/phosphate buffered saline (PBS, pH 7.4), with a half-maximum signal inhibition concentration (IC50) of 0.20 ng mL(-1). Compared to the parental VHH T3-15, T3-15-AP was able to bind to a wider variety of coating antigens and the assay sensitivity was slightly improved. Cross-reactivity of T3-15-AP with a set of important brominated analogues was negligible (<0.1%). Although T3-15-AP was susceptible to extreme heat (90 °C), much higher binding stability at ambient temperature was observed in the T3-15-AP-based assay for at least 70 days. A simple pretreatment method of diluting urine samples with DMSO was developed for a one-step assay. The recoveries of TBBPA from urine samples via this one-step assay ranged from 96.7% to 109.9% and correlated well with a high-performance liquid chromatography-tandem mass spectroscopy (HPLC-MS/MS) method. It is expected that the dimerized fusion protein, VHH-AP, will show promising applications in human exposure and environmental monitoring.

Mutants with higher stability and specific activity from a single thermosensitive variant of T7 RNA polymerase

A single strategy to select RNA polymerase from bacteriophage T7 (T7 RNAP) mutants in Escherichia coli with enhanced thermostability or enzymatic activity is described. T7 RNAP has the ability to specifically transcribe genes under control of T7 phage promoter. By using random mutagenesis of the T7 RNAP gene in combination with an appropriate screening at 25 and 42°C, we have generated and selected E.coli clones with temperature-sensitive phenotype in the presence of chloramphenicol. The resistance to chloramphenicol used to select these clones results from expression control of the chloramphenicol acetyl transferase gene by the T7 promoter. In a second phase, and using the thermosensitive T7 RNAP variants as template, a new round of random mutagenesis was performed. Combined to an appropriate screening strategy, 11 mutations (second-site T7 RNAP revertants) that restore the initial resistance to chloramphenicol at 42°C were identified. Nine of these mutations increase the thermal resistance of the wild-type T7 RNA. They include the five mutations previously described using different approaches and four novel mutations. One improves T7 RNA catalytic activity and one has no positive effect on the natural enzyme but increases the activity of some combined mutants. Additive effects of mutations amount to an increase of as much as 10°C in T1/2 compared with the wild-type enzyme and up to a 2-fold activity enhancement.

Production and characterization of a single-chain variable fragment linked alkaline phosphatase fusion protein for detection of O,O-diethyl organophosphorus pesticides in a one-step enzyme-linked immunosorbent assay

A single-chain variable fragment (scFv) linked alkaline phosphatase (AP) fusion protein for detection of O,O-diethyl organophosphorus pesticides (O,O-diethyl OPs) was produced and characterized. The scFv gene was prepared by cloning V(L) and V(H) genes from hybridoma cells secreting monoclonal antibody with broad specificity for O,O-diethyl OPs. The amplified V(L) and V(H) regions were assembled using a linker (Gly(4)Ser)(3) by means of splicing overlap extension polymerase chain reaction to obtain the scFv gene, which was cloned into the expression vector pLIP6/GN containing an AP gene to produce the scFv-AP fusion protein in Escherichia coli strain BL21. The protein was purified by antigen-conjugated immunoaffinity chromatography and characterized by sodium dodecyl sulfate-polyacrylamide gel electrophoresis, Western blotting, and competitive direct enzyme-linked immunosorbent assay (cdELISA). The fusion protein is bifunctional, retaining both antigen binding specificity and AP enzymatic activity. Analysis of spiked and blind river water and Chinese cabbage samples demonstrated that the fusion protein based cdELISA(FP) exhibited good sensitivity and reproducibility.

Evidence of the participation of remote residues in the catalytic activity of Co-type nitrile hydratase from Pseudomonas putida

Active sites may be regarded as layers of residues, whereby the residues that interact directly with substrate also interact with residues in a second shell and these in turn interact with residues in a third shell. These residues in the second and third layers may have distinct roles in maintaining the essential chemical properties of the first-shell catalytic residues, particularly their spatial arrangement relative to the substrate binding pocket, and their electrostatic and dynamic properties. The extent to which these remote residues participate in catalysis and precisely how they affect first-shell residues remains unexplored. To improve our understanding of the roles of second- and third-shell residues in catalysis, we used THEMATICS to identify residues in the second and third shells of the Co-type nitrile hydratase from Pseudomonas putida (ppNHase) that may be important for catalysis. Five of these predicted residues, and three additional, conserved residues that were not predicted, have been conservatively mutated, and their effects have been studied both kinetically and structurally. The eight residues have no direct contact with the active site metal ion or bound substrate. These results demonstrate that three of the predicted second-shell residues (α-Asp164, β-Glu56, and β-His147) and one predicted third-shell residue (β-His71) have significant effects on the catalytic efficiency of the enzyme. One of the predicted residues (α-Glu168) and the three residues not predicted (α-Arg170, α-Tyr171, and β-Tyr215) do not have any significant effects on the catalytic efficiency of the enzyme.

Coordination sphere of the third metal site is essential to the activity and metal selectivity of alkaline phosphatases

Alkaline phosphatases (APs) are commercially applied enzymes that catalyze the hydrolysis of phosphate monoesters by a reaction involving three active site metal ions. We have previously identified H135 as the key residue for controlling activity of the psychrophilic TAB5 AP (TAP). In this article, we describe three X-ray crystallographic structures on TAP variants H135E and H135D in complex with a variety of metal ions. The structural analysis is supported by thermodynamic and kinetic data. The AP catalysis essentially requires octahedral coordination in the M3 site, but stability is adjusted with the conformational freedom of the metal ion. Comparison with the mesophilic Escherichia coli, AP shows differences in the charge transfer network in providing the chemically optimal metal combination for catalysis. Our results provide explanation why the TAB5 and E. coli APs respond in an opposite way to mutagenesis in their active sites. They provide a lesson on chemical fine tuning and the importance of the second coordination sphere in defining metal specificity in enzymes. Understanding the framework of AP catalysis is essential in the efforts to design even more powerful tools for modern biotechnology.

Biological applications of a chimeric probe for the assessment of galectin-3 ligands

Beta1-6 branching of N-linked oligosaccharides has been correlated with the progression of different cancers. The leukoagglutinins of Phaseolus vulgaris (L-PHA) have been used to study this pattern of glycosylation whose biological significance is incompletely understood. The animal lectin, galectin-3, also binds to structures recognized by L-PHA. To develop a functional tool for the in situ identification of this pattern of glycosylation, human galectin-3 was fused to bacterial alkaline phosphatase (gal3/AP). Gal3/AP recognized both A and B blood group saccharides (B>A) and lactosamine derivatives. Gal3/AP recognition depended at least in part on the N-linked oligosaccharides of different glycoproteins. The presence and distribution of galectin-3 ligands were analyzed in both murine and human normal and tumor samples. Loss of apical expression of galectin-3 ligands was commonly found in carcinomas. Endothelial and inflammatory cells were enriched in galectin-3 ligands as compared with tumor cells; thus, gal3/AP is a suitable tool for studying tumor microenvironments. Comparative analysis of both gal3/AP and L-PHA binding patterns indicated that although similar, these patterns are not identical. The probe developed was useful for several immunoenzymatic assays and will allow the physiological and clinical significance of the expression pattern of galectin-3 ligands to be established. This manuscript contains online supplemental material at http://www.jhc.org. Please visit this article online to view these materials.

Crystal Structure of Alkaline Phosphatase from the Antarctic Bacterium TAB5

Alkaline phosphatases (APs) are non-specific phosphohydrolases that are widely used in molecular biology and diagnostics. We describe the structure of the cold active alkaline phosphatase from the Antarctic bacterium TAB5 (TAP). The fold and the active site geometry are conserved with the other AP structures, where the monomer has a large central beta-sheet enclosed by alpha-helices. The dimer interface of TAP is relatively small, and only a single loop from each monomer replaces the typical crown domain. The structure also has typical cold-adapted features; lack of disulfide bridges, low number of salt-bridges, and a loose dimer interface that completely lacks charged interactions. The dimer interface is more hydrophobic than that of the Escherichia coli AP and the interactions have tendency to pair with backbone atoms, which we propose to result from the cold adaptation of TAP. The structure contains two additional magnesium ions outside of the active site, which we believe to be involved in substrate binding as well as contributing to the local stability. The M4 site stabilises an interaction that anchors the substrate-coordinating R148. The M5 metal-binding site is in a region that stabilises metal coordination in the active site. In other APs the M5 binding area is supported by extensive salt-bridge stabilisation, as well as positively charged patches around the active site. We propose that these charges, and the TAP M5 binding, influence the release of the product phosphate and thus might influence the rate-determining step of the enzyme.

Structural studies of human alkaline phosphatase in complex with strontium: implication for its secondary effect in bones

Strontium is used in the treatment of osteoporosis as a ranelate compound, and in the treatment of painful scattered bone metastases as isotope. At very high doses and in certain conditions, it can lead to osteomalacia characterized by impairment of bone mineralization. The osteomalacia symptoms resemble those of hypophosphatasia, a rare inherited disorder associated with mutations in the gene encoding for tissue-nonspecific alkaline phosphatase (TNAP). Human alkaline phosphatases have four metal binding sites--two for zinc, one for magnesium, and one for calcium ion--that can be substituted by strontium. Here we present the crystal structure of strontium-substituted human placental alkaline phosphatase (PLAP), a related isozyme of TNAP, in which such replacement can have important physiological implications. The structure shows that strontium substitutes the calcium ion with concomitant modification of the metal coordination. The use of the flexible and polarizable force-field TCPEp (topological and classical polarization effects for proteins) predicts that calcium or strontium has similar interaction energies at the calcium-binding site of PLAP. Since calcium helps stabilize a large area that includes loops 210-228 and 250-297, its substitution by strontium could affect the stability of this region. Energy calculations suggest that only at high doses of strontium, comparable to those found for calcium, can strontium substitute for calcium. Since osteomalacia is observed after ingestion of high doses of strontium, alkaline phosphatase is likely to be one of the targets of strontium, and thus this enzyme might be involved in this disease.

Distinct structure and activity recoveries reveal differences in metal binding between mammalian and Escherichia coli alkaline phosphatases

The amino acids involved in the coordination of two Zn2+ ions and one Mg2+ ion in the active site are well conserved from EAP (Escherichia coli alkaline phosphatase) to BIAP (bovine intestinal alkaline phosphatase), whereas most of their surrounding residues are different. To verify the consequences of this heterology on their specific activities, we compared the activity and structure recoveries of the metal-free forms (apo) of EAP and of BIAP. In the present study, we found that although the sensitivities of EAP and BIAP to ions remained similar, significant differences in dimeric structure stability of apo-enzymes were observed between EAP and BIAP, as well as in the kinetics of their activity and secondary structure recoveries. After mild chelation inactive apo-EAP was monomeric under mild denaturing conditions, whereas inactive apo-BIAP remained dimeric, indicating that the monomer-monomer contact was stronger in the mammalian enzyme. Dimeric apo-EAP (0.45 microM, corresponding to 4 units/ml) recovered approx. 80% of its initial activity after 3 min incubation in an optimal recovery medium containing 5 microM Zn2+ and 5 mM Mg2+, whereas dimeric apo-BIAP (0.016 microM, corresponding to 4 units/ml) recovered 80% of its native activity after 6 h incubation in an optimal recovery medium containing 0.5 microM Zn2+ and 5 mM Mg2+. Small and different secondary structure changes were also observed during activity recoveries of apo-BIAP and apo-EAP, which were not in parallel with the activity recoveries, suggesting that distinct and subtle structural changes are required for their optimal activity recoveries.

Reversible inactivation of alkaline phosphatase from Atlantic cod (Gadus morhua) in urea

Alkaline phosphatase (AP) from Atlantic cod (Gadus morhua) is a zinc and magnesium containing homodimer that requires the oligomeric state for activity. Its kinetic properties are indicative of cold-adaptation. Here, the effect of urea on the structural stability was studied in order to correlate the activity with metal content, the microenvironment around tryptophan residues, and events at the subunit interface. At the lowest concentrations of urea, the first detected alteration in properties was an increase in the activity of the enzyme. This was followed by inactivation, and the release of half of the zinc content when the amount of urea reached levels of 2 M. Intrinsic tryptophan fluorescence and circular dichroism ellipticity changed in the range 2.5 to 8 M urea, signaling dimer dissociation, followed by one major monomer unfolding transition at 6-8 M urea as indicated by ANS fluorescence and KI fluorescence quenching. Gibbs free energy was estimated by the linear extrapolation method using a three-state model as 8.6 kcal/mol for dimer stability and 11.6 kcal/mol for monomer unfolding giving a total of 31.8 kcal/mol. Dimer association had a very small ionic contribution. Dimers were stable in relatively high concentration of urea, whereas the immediate vicinity around the active site was vulnerable to low concentrations of urea. Thus, inactivation did not coincide with dimer dissociation, suggesting that the active site is the most dynamic part of the molecule and closest related to cold-adaptation of its enzymatic activity.

BgK, a disulfide-containing sea anemone toxin blocking K+ channels, can be produced in Escherichia coli cytoplasm as a functional tagged protein

BgK, a sea anemone peptide consisting of 37 amino acid residues and 3 disulfide bonds, blocks voltage-gated potassium (Kv1) channels. Here, we report a method for producing tagged BgK in Escherichia coli, as a soluble cytoplasmic protein. First, using peptidic synthesis, we show that addition of a 15 residue peptide (S.Tag) at the BgK C-terminus does not affect its biological activity. Then, a synthetic DNA sequence encoding BgK was constructed and cloned to produce a BgK-S.Tag hybrid in the cytoplasm of E. coli. The presence of S.Tag did not only facilitate detection, quantification, and purification of the recombinant protein, but also increased the production yield by more than two orders of magnitude. Moreover, use of an E. coli OrigamiB(DE3)pLacI strain also increased production; up to 5.8-7.5mg of BgK-S.Tag or mutated BgK(F6A)-S.Tag was produced per liter of culture and could be functionally characterized in crude extracts. Using a two-step purification procedure (affinity chromatography and RP-HPLC), we obtained 1.8-2.8mg of purified recombinant protein per liter of culture. The recombinant peptides displayed functional properties similar to those of native BgK or BgK(F6A).

Cloning, expression, and characterization of a bi-functional disintegrin/alkaline phosphatase hybrid protein

Integrins are transmembrane heterodimeric glycoproteins responsible for cellular communication; therefore, they play an essential role in many physiological events. Viper snake venoms contain integrin antagonists called disintegrins which bind and inhibit integrin function. They present a loop containing an RGD motif responsible for integrin binding. The engineering of disintegrins fused to a reporter enzyme will be an interesting approach to build integrin markers. Even more, the disintegrin scaffold could be used to present other protein binding motifs. In this work, we have obtained alkaline phosphatase (APv) tagged eristostatin (Er) by cloning and expressing eristostatin DNA into the pLIP6-GN vector. Eristostatin, a 49 residue disintegrin, binds selectively to alphaIIbbeta3 integrin, inhibiting its binding to fibrinogen. The resulting fusion protein Er/APv was identified by SDS-PAGE and by Western blotting using both anti-Er and anti-AP antibodies. This fusion protein showed enzymatic AP activity similar to that of wild APv and its potential use for an alphaIIbbeta3 integrin assay was tested in a one-step dot blot using immobilized cells incubated with the marker and developed by AP substrate. Er/APv showed selectivity towards platelets and alphaIIbbeta3 integrin transfected cells and reacted with the same region as unlabeled Er, as analyzed in competition assays. Our data present a novel tool, Er/APv, with potential use as molecular marker in processes where the alphaIIbbeta3 integrin is involved.

Artificial evolution of an enzyme active site: structural studies of three highly active mutants of Escherichia coli alkaline phosphatase

The crystal structure of three mutants of Escherichia coli alkaline phosphatase with catalytic activity (k(cat)) enhancement as compare to the wild-type enzyme is described in different states. The biological aspects of this study have been reported elsewhere. The structure of the first mutant, D330N, which is threefold more active than the wild-type enzyme, was determined with phosphate in the active site, or with aluminium fluoride, which mimics the transition state. These structures reveal, in particular, that this first mutation does not alter the active site. The second mutant, D153H-D330N, is 17-fold more active than the wild-type enzyme and activated by magnesium, but its activity drops after few days. The structure of this mutant was solved under four different conditions. The phosphate-free enzyme was studied in an inactivated form with zinc at site M3, or after activation by magnesium. The comparison of these two forms free of phosphate illustrates the mechanism of the magnesium activation of the catalytic serine residue. In the presence of magnesium, the structure was determined with phosphate, or aluminium fluoride. The drop in activity of the mutant D153H-D330N could be explained by the instability of the metal ion at M3. The analysis of this mutant helped in the design of the third mutant, D153G-D330N. This mutant is up to 40-fold more active than the wild-type enzyme, with a restored robustness of the enzyme stability. The structure is presented here with covalently bound phosphate in the active site, representing the first phosphoseryl intermediate of a highly active alkaline phosphatase. This study shows how structural analysis may help to progress in the improvement of an enzyme catalytic activity (k(cat)), and explains the structural events associated with this artificial evolution.