Compressible Carbon Sponges from Delignified Wood for Fast Cleanup and Enhanced Recovery of Crude Oil Spills by Joule Heat and Photothermal Effect

Eco-friendly bacterial cellulose/MXene aerogel with excellent photothermal and electrothermal conversion capabilities for efficient separation of crude oil/seawater mixture

Developing novel absorbent materials targeting high-efficiency, low-energy-consumption, and environmental-friendly oil spill cleanup is still a global issue. Porous absorbents endowed with self-heating function are an attractive option because of that they are able to in-situ heat crude oil and dramatically reduce oil viscosity for efficient remediation. Herein, we facilely prepared an eco-friendly multifunctional bacterial cellulose/MXene aerogel (P-SBC/MXene aerogel) for rapid oil recovery. Thanks to excellent full solar spectrum absorption (average absorbance = 96.6 %), efficient photo-thermal conversion, and superior electrical conductivity (electrical resistance = 36 Ω), P-SBC/MXene aerogel exhibited outstanding photothermal and electrothermal capabilities. Its surface temperature could quickly reach 93 °C under 1.0 kW/m2 solar irradiation and 124 °C under 3.0 V voltage respectively, enabling effective heat transfer toward spilled oil. The produced heat significantly decreased crude oil viscosity, allowing P-SBC/MXene aerogel to rapidly absorb oil. By combining solar heating and Joule heating, P-SBC/MXene aerogel connected to a pump-assisted absorption device was capable of achieving all-weather crude oil removal from seawater (crude oil flux = 630 kg m-2 h-1). More notably, P-SBC/MXene aerogel showed splendid outdoor crude oil separation performance. Based on remarkable crude oil/seawater separation ability, the versatile aerogel provides a promising way to deal with large-area oil spills.

A Hydrogel-coated Wood Membrane with Intelligent Oil Pollution Detection for Emulsion Separation

Considering the potential threats posed by oily wastewater to the ecosystem, it is urgently in demand to develop efficient, eco-friendly, and intelligent oil/water separation materials to enhance the safety of the water environment. Herein, an intelligent hydrogel-coated wood (PPT/PPy@DW) membrane with self-healing, self-cleaning, and oil pollution detection performances is fabricated for the controllable separation of oil-in-water (O/W) emulsions and water-in-oil (W/O) emulsions. The PPT/PPy@DW is prepared by loading polypyrrole (PPy) particles on the delignified wood (DW) membranes, further modifying the hydrogel layer as an oil-repellent barrier. The layered porous structure and selective wettability endow PPT/PPy@DW with great separation performance for various O/W emulsions (≥98.69% for separation efficiency and ≈1000 L m-2 h-1 bar-1 for permeance). Notably, the oil pollution degree of PPT/PPy@DW can be monitored in real-time based on the changed voltage generated during O/W emulsion separation, and the oil-polluted PPT/PPy@DW can be self-cleaned by soaking in water to recover its separation performance. The high affinity of PPT/PPy@DW for water makes it effective in trapping water from the mixed surfactant-stabilized W/O emulsions. The prepared eco-friendly and low-cost multifunctional hydrogel wood membrane shows promising potential in on-demand oil/water separation and provides new ideas for the functional improvement of new biomass oil/water separation membrane materials.

Achieving ultrahigh uranium/vanadium selectivity of poly(amidoxime) via coupling MXene-enabled strong intermolecular interaction and separated photothermal interface

Poly(amidoxime) (PAO) has been recognized as the most potential candidate for extracting uranium from seawater, owing to its merits of outstanding uranium affinity, low cost, and large-scale production. Despite remarkable achievements, existing PAO sorbents suffer from unsatisfactory uranium extraction efficiency and selectivity, as imposed by the inherently sluggish uranium adsorption kinetics and inevitable spatial configuration transition of amidoxime, which diminishes uranium affinity. Herein, we discover a facile and integrated design to elaborate a PAO/MXene nanocomposite that delivers ultrahigh and durable uranium/vanadium (U/V) selectivity. The key to our design lies in harnessing MXene-enabled strong intermolecular interactions to PAO to minimize the spatial configuration transition of amidoxime and stabilizing its superior uranium affinity, as well as creating a separated photothermal interface to maximize temperature-strengthened affinity for uranium over vanadium. Such a synergetic effect allows the nanocomposite to acquire over a 4-fold improvement in U/V selectivity compared to that of pure PAO as well as an unprecedented distribution coefficient of uranium compared to most state-of-the-art sorbents. We further demonstrate that our nanocomposite exhibits durable U/V selectivity with negligible attenuation and good antibacterial ability even in long-term operation. The design concept and extraordinary performance in this study bring PAO-based sorbents a step closer to practical uranium extraction from seawater.

Stereo-complex polylactide composite aerogel for crude oil adsorption

Adsorption materials are a cost-effective and simple method for oil spill remediation, but their efficiency is limited by high crude oil viscosity. Additionally, non-degradable materials pose another risk of secondary pollution, such as microplastic debris. Here, an environmentally-friendly stereo-complex polylactide composite (SCC) aerogel were developed via water-assisted thermally induced phase separation. The SCC with 3 wt% carbon nanotubes had a hierarchical structure of micro/nanoscale pores and high content of stereo-complex crystallites (35.7 %). Along with the excellent water repellency (water contact angle: 157°), SCC aerogel was 2.7 times as resistant to hydrolysis than poly(l-lactide) aerogel (Ph = 13, 37 °C). Additionally, a maximum absorption capacity of 41.2 g g-1 and over 97 % oil/water separation efficiency after 10 cycles were obtained in low viscosity conditions; while in high viscosity conditions, it displayed excellent photothermal performance, reaching a surface temperature of 85 °C under 1 sunlight, reducing crude oil absorption time from 42 min to 60 s (97.6 %-time savings). Moreover, it facilitated continuous crude oil spill recovery under sunlight with an adsorption rate of 3.3 × 104 kg m-3 h-1. The SCC aerogel presents a potential route for utilizing solar energy in crude oil adsorption applications without additional environmental burden.

TDA/rGO@WS with Joule heat and photothermal synergistic effect: A promising adsorption material for all-weather recovery of viscous oil spills at sea

Oil spills are a global environmental protection challenge, and traditional adsorption materials have poor effect on low temperature and high viscosity marine oil spills. This article reports composite adsorption materials TDA/rGO@WS for viscous oil spills: loaded with rGO/TDA coating on a commercial biomass wood pulp sponge (WS), achieving Joule heating, photothermal effect and hydrophobic modification. The results showed that the TDA/rGO@WS has good photothermal conversion ability and Joule heating ability, and the temperature increased to 83.7 °C and 148 °C, respectively, under simulated solar irradiation and additional voltage at room temperature. The efficiency of adsorption at a low temperature of 5 °C increased by 22.41% at 1 sun and by 51.53% at 10 V. Temperature effectively reduced the viscosity of the offshore oil spill and ensures the efficient adsorption of oil spills at low temperatures promoted. The TDA/rGO@WS also showed good hydrophobicity (WCA=129°), excellent efficiency of water-oil separation (99.53%) and good adsorption capacity (9.4-13.68 g/g) for marine fuel oils. TDA/rGO@WS effectively solves the problem of cleaning up high-viscosity oil spills from ships in winter and polar waters, and proposes a new strategy for all-weather efficient treatment of oil spills at sea.

Robust functionalized cellulose-based porous composite for efficient capture and ultra-fast desorption of aqueous heavy metal pollution

The heavy metal pollution control industry requires convenient and cost-effective solutions to address complex aqueous environment. Adsorption method can be an effective strategy to realize these goals. Considering the importance of environmental and sustainable development strategies, there is an urgent need to develop efficient, green and non-toxic heavy metal adsorbents. In this work, a robust aminated cellulose-based porous adsorbent (PGPW) was developed from delignified wood and amino-rich polymer using a solvent-free, mild, simple and efficient preparation method. Such adsorbent exhibited excellent adsorption capacity (188.68 mg g-1) for Cu(II), and its adsorption behavior was consistent with pseudo-second order kinetic and Langmuir isotherm models. Notably, PGPW with superior compressibility could be squeezed to achieve rapid desorption and reach equilibrium within 5 min, while still retaining 87 % adsorption efficiency after 50 cycles. In addition, PGPW showed remarkable selectivity towards various coexisting ionic systems and demonstrated a considerable adsorption capacity in natural water applications. The adsorption mechanism of heavy metal ions on porous adsorption material was elucidated. This approach provides a simple, gentle and sustainable strategy for preparing functionalized wood-based composites with efficient adsorption and ultra-fast desorption of heavy metal ions.

Highly elastic photothermal nanofibrillated cellulose aerogels for solar-assisted efficient cleanup of viscous oil spill

Frequent oil spills and illegal industrial pollutant discharge cause ecological and resource damages, so it is necessary to establish efficient adsorption and recovery strategies for oils in wastewater. Herein, inspired by solar-driven viscosity-breaking, we propose a facile approach to fabricate multifunctional nanofibrillated cellulose-based aerogel with high elasticity, excellent photothermal conversion, efficient selective oil adsorption and antibacterial properties. Firstly, copper sulfide (CuS) nanoparticles were in situ deposited on the template of oxidative nanofibrillated cellulose (ONC), aiming at achieving efficient photothermal effect and antibacterial properties. Ethylene glycol diglycidyl ether (EGDE) was employed to establish multiple crosslinking network between CuS@ONC and polyethyleneimine (PEI). A thin hydrophobic PMTS layer deposited on the surface of aerogel via a facile gas-solid reaction ensured stable oil selectivity. The resulting composite aerogel can rapidly adsorb oil under solar self-heating, significantly reducing the adsorption time from 25 to 5 min. Furthermore, it exhibits excellent adsorption capacities for various oils, retaining over 92 % of its initial capacity even after 20 adsorption-desorption cycles, and the antibacterial properties extend its lifespan. This work offers a promising method for constructing multifunctional aerogels for efficient oil-water separation, especially beneficial for high-viscosity and high-melting-point oil cleanup.

Structural Engineering-Enabled Joule Heating Effect Cooperated with Capillary Effect Toward Fast Spreading of Droplets for High-Flux Separation of Viscous Emulsion

Viscous emulsions with poor fluidity and high adhesion are extremely difficult to separate. Herein, high-flux separation of viscous emulsions is realized by developing structural engineered collagen fibers (CFs)-based composite membrane that featured 3D conductive hierarchical fiber structure with the spaced carbon nanofibers (CNFs) and activated carbon (AC) serving as conductive network and competitive adsorption-based demulsifying sites, respectively. The as-designed membrane structure boosts fast spreading of emulsion droplets on membrane surface aided by the synergistic effect of joule heat in situ generated by the spaced CNFs and the capillary effect derived from CFs, which guarantees the full contact of viscous emulsions with the spaced AC for achieving ultra-efficient demulsifying. The permeation of resultant oily filtrate is accelerated by the capillary effect of hierarchically fibrous structured CFs to exhibit fast transport kinetics, therefore accomplishing high-flux separation. The structural engineered membrane achieves high-performance separation toward different viscous emulsions (55.4-123.7 mPa·s) with separation efficiency >99.9% and flux high up to 259 L m-2 h-1 . The investigations provide a novel structural engineering strategy for realizing high-performance separation of viscous emulsions.

Melt-blown fiber felt for efficient all-weather recovery of viscous oil spills by Joule heating and photothermal effect

Adsorbents play a vital role in responding to marine oil spills, yet effectively cleaning up viscous oil spills remains a technical challenge. Herein, we present a superhydrophobic oil-adsorbing felt prepared using melt-blown technology and functionally enhanced with a photoelectric composite CNT/PANI coating for effectively cleaning up high-viscosity oil spills. By virtue of its superior solar/Joule heating ability and thermally conductive fiber network, p-CNT/PANI@PP notably reduced crude oil viscosity and enhanced the oil diffusion coefficient within pores. Leveraging primarily solar heating and supplemented by Joule heating, p-CNT/PANI@PP demonstrates an impressive in-situ adsorption rate of up to 560 g/h for ultra-high-viscosity crude oil (c.a. 138000 mPa·s), alongside an adsorption capacity of 15.57 g/g. This measure enables efficient viscosity reduction and continuous day-and-night recovery of viscous crude oil, addressing the challenges posed by seasonal fluctuations in seawater temperature and adverse weather conditions. Moreover, a conveyorized collector integrated with an oil-adsorbing felt realizes continuous recovery of viscous oil spills with speed control to tackle varying thicknesses of oil film. Given the top-down material design, superior functionality, and applicability to applications, this work provides a comprehensive and feasible solution to catastrophic large-area viscous oil spills.

MXene/Graphene modified cellulose aerogel for photo-electro-assisted all-weather cleanup of high-viscous crude oil from spill

The frequent occurrence of oil spills has led to serious environmental pollution and ecological issues. Given the high-viscosity of crude oil, it is essential to develop sorbents with efficient viscosity reduction and sorption capacity in various environmental conditions. Herein, a superhydrophobic carboxymethyl cellulose (CMC) aerogel co-modified by MXene and graphene jointly (M-Mxene/Gr CA) with aligned channels structure was prepared. The aligned channels structure can effectively improve the longitudinal thermal conductivity and reduce the sorption resistance. Through the modification of MXene and graphene, the aerogel realized efficient photo/electro-thermal conversion, thus ensuring its adaption to various working environments. The rapid heat generation can significantly reduce the viscosity of crude oil, achieving rapid recovery. Under one sun illumination (1.0 kW/m2), the surface temperature of M-Mxene/Gr CA can reach 72.6 °C and its sorption capability for high-viscous crude oil reaches 18 g/g. Combining photo-thermal and electro-thermal (0.5 kW/m2 and 23 V), the average sorption rate of crude oil can reach 1.3 × 107 g m-3 s-1. Finally, we present a continuous sorption system to recover offshore oil spills under the assistance of a pump. This work provides a new option for tackling high-viscous offshore oil spills due to its environmental friendliness and fast sorption capacity.

Lamellar Wood Sponge with Vertically Aligned Channels for Highly Efficient and Salt-Resistant Solar Desalination

Solar-assisted interfacial evaporation is a promising approach for purifying and desalinating water. As a sustainable biomass material, wood has attracted increasing interest as an innovative substrate for solar desalination, owing to its intrinsic porous structure, high hydrophilicity, and low thermal conductivity. However, developing wood-based solar evaporators with high evaporation rates and excellent salt resistance still remains a significant challenge, owing to the absence of large pores with high interconnectivity in natural wood. Herein, by converting the honeycombed structure of natural wood into a lamellar architecture via structural engineering, we develop a flexible wood sponge with vertically aligned channels for efficient and salt-resistant solar desalination after surface coating with carbon nanotubes (CNTs). The special lamellar structure with an interlayer distance of 50-300 μm provides the wood sponge with faster water transport, lower thermal conductivity, and water evaporation enthalpy, thus achieving higher evaporation performances in comparison with the cellular structure of natural wood. Noteworthy, the vertically aligned channels of the wood sponge facilitate sufficient fluid convection and diffusion and enable efficient salt exchanges between the heating interface and the underlying bulk water, thus preventing salt accumulation on the surface. Benefiting from the distinctive lamellar structure, the developed wood-sponge evaporator exhibits exceptional salt resistance even in a hypersaline brine (20 wt %) during continuous 7-day desalination under 1 sun irradiation, with a high evaporation rate (1.38-1.43 kg m-2 h-1), outperforming most previously reported wood-based evaporators. The lamellar wood sponge may provide a promising strategy for desalinating high-salinity brines in an efficient manner.

Corn stalk pith-based hydrophobic aerogel for efficient oil sorption

Bio-based aerogel has become an attractive sorbent for spilled oil and organic pollutants because of its light weight, high porosity and strong sorption capacity. However, the current fabrication process is mainly "bottom-up" technology, which is cost-expensive, time-consuming, and energy-intensive. Herein, we report a top-down, green, efficient and selective sorbent prepared from corn stalk pith (CSP) using the deep eutectic solvent (DES) treatment, followed by TEMPO/NaClO/NaClO₂ oxidization and microfibrillation, and then hexamethyldisilazane coating. Such chemical treatments selectively removed lignin and hemicellulose, broke the thin cell walls of natural CSP, forming an aligned porous structure with capillary channels. The resultant aerogels had a density of 29.3 mg/g, a porosity of 98.13%, and a water contact angle of 130.5^◦, exhibiting excellent oil/organic solvents sorption performance, with a high sorption capacity in the range of 25.4-36.5 g/g, approximately 5-16-fold higher than CSP, and with fast absorption speed and good reusability.

Facile fabrication of solar-heating and Joule-heating hyperelastic MXene-modified sponge for fast all-weather clean-up of viscous crude oil spill

Developing rational sorbent for viscous crude oil clean-up is still a daunting challenge, which requires rapid oil-uptake capability and scalable fabrication process. Herein, a heatable hydrophobic sponge sorbent (H-MXene/PVA/MS) with excellent light/Joule-heating performances was fabricated by a simple and feasible top-down approach. MXene nanosheets firmly coated on the substrate skeleton gave the sorbent outstanding ability to convert solar/electricity into heat rapidly due to the localized surface plasmon resonance (LSPR) effect and ultrahigh metallic conductivity. The surface temperature of H-MXene/PVA/MS could reach about 80 ℃ under 1.0 sun irradiation within 30 s and 125 ℃ under a low applying voltage of 6 V within 25 s. The rapid and sufficient heat generation on the sorbent would effectively warm the surrounding oil and accelerate its absorption. The oil absorption rate under 1.0 sun irradiation (1 kW/m²) improved about 41.5 times compared to the unheated sorbent. Moreover, the sorbent showed practical application potential in harsh environments due to its high coating firmness, durability, elasticity, and suitability for large-scale production and operations. Thus, the easily-prepared H-MXene/PVA/MS sorbent, which mainly focuses on solar-heating, supplemented by Joule-heating, provides an efficient and energy-efficient strategy for addressing large-scale viscous oil spill clean-up.

Cleanup of oils and organic solvents from contaminated water by biomass-based aerogel with adjustable compression elasticity

Leakage of oils and organic solvents poses a significant threat to aquatic environments. Here, low-temperature carbonized aerogels with highly porous and anisotropic structures obtained only from biomass-derived materials were proposed to absorb polymorphic oils from contaminated water. Specifically, carbonized aerogels prepared at temperatures of 300 °C and 350 °C exhibited ultra-high absorption capacities (40‒125 g g^-1) and oil-water separation efficiencies (> 99%) even in harsh environments, which were attributed to their exceptional properties, including high porosity, abundant macropores, excellent thermal stability, and hydrophobicity. Through citric acid crosslinking and low-temperature carbonization, the aerogels exhibited superior compression elasticity and could be cyclically utilized through simple extrusion while realizing the recovery of oils. Moreover, the outstanding photothermal conversion properties obtained through carbonization contributed to the high temperature and fluidity of the oils surrounding the aerogels, which is crucial for improving the absorption performance of high-viscosity oils. Such absorbent materials are used to separate crude oil from oil-water mixtures, which can achieve maximum absorption of 56 g g^-1 and increase the absorption rate (from several days to 10 min) in a low-temperature (4 °C) seawater environment.

Super-amphiphilic graphene promotes peroxymonosulfate-based emulsion catalysis for efficient oil purification

Oil fractions containing highly toxic and hazardous organic contaminants can not only cause severe environmental disasters, but also an undesired waste of resources. Given the exceptional performance of persulfates in the removal of persistent and refractory organic pollutants from aqueous media, herein, a peroxymonosulfate-based Pickering emulsion catalytic (PPEC) system was constructed for the hazardous oil purification, using super-amphiphilic graphene as a solid emulsifier and a heterogeneous catalyst simultaneously. Combined detailed instrumental analysis with theoretical calculations, we find that the incorporation of pyridinic N and its oxide significantly facilitated the formation of super-amphiphilic graphene and successfully induced the formation of Pickering emulsion. In addition to stabilizing the PPEC system, super-amphiphilic graphene can also achieve efficient removal of Sudan III (simulated lipophilic organic pollutant) by activating peroxymonosulfate (PMS) to generate •O₂^- and ¹O₂. Results showed that 80 mg/L Sudan III (20 mL) could be fully degraded within 30 min using 10 mL 5 mmol PMS. More significantly, our proposed PPEC system also exhibited excellent property in the purification of practical waste engine oil. This study provides new insights into the purification and recovery of waste oil.

Superhydrophobic aerogel blanket with magnetic and solar heating effect enables efficient continuous cleanup of highly viscous crude oil

Rapid cleanup of highly-viscous oil spills the sea is eagerly desired while still remains a great challenge. Hydrophobic and lipophilic adsorbents are regarded as ideal candidate for oil spill remediation. However, traditional adsorbents are not suitable for viscous crude oil, which would block the porous structure and lead to poor adsorption efficiency. In this work, a non-contact responsive superhydrophobic SiO₂ aerogel blankets (SAB) with excellent magnetic and solar heating effect for efficient removal of viscosity oils under harsh environments was developed, via assembled MXene and Fe₃O₄/polydimethylsiloxane layer-by-layer along the SAB skeleton (Fe₃O₄/MXene@SAB). The Fe₃O₄/MXene@SAB exhibited excellent compression tolerance (compression stress 70.69 kPa), superhydrophobic performance (water contact angle 166°), and corrosion resistance (weak acid/strong base). Due to high water repellency and stable porous structure, the Fe₃O₄/MXene@SAB could successfully separate oil-water mixture, while with remarkable separation flux (1.50-3.19 × 10⁴ L m^-2 h^-1), and separation efficiency (99.91-99.98 %). Furthermore, the responsive Fe₃O₄/MXene@SAB also showed outstanding magnetic-heating and solar-heating conversion efficiency, which could continuously separate high viscosity crude oil from seawater by pump even under relatively low magnetic fields and mild sun. The superhydrophobic blankets hold great promise for efficient treatment of heavy oil spills.

Ultrafast and on-demand oil/water separation with vertically aligned cellulosic smart sponge

Slow oil sorption speed of commercial non-woven polypropylene (PP) sorbent remains a major challenge for efficient clean-up of oil spillage. Adsorption-based polymeric sponge oil removing offers an appealing way to solve this challenge by increasing surface area. However, the tortuous oil sorption path and plastic waste after oil uptake are two long-standing bottlenecks for realizing efficient oil spill removal. Here, we report a vertically aligned-biomass fiber junctioned sorbents (a-BFJS), by confining delignified biomass with carbon nanotube (CNT), polyvinyl alcohol (PVA), and methyltrimethoxysilane (MTMS). The sorbent shows an excellent performance towards xylene sorption capacity with uptake about 50 g g^-1 within 10 s. This is due to the wide and short pathway of their aligned channels, which improves the capillary effect and fast oil transport in the oriented channels. Moreover, the sponge exhibits fast oil sorption-desorption kinetics enabled by simple mechanical squeezing. We further engineered a scalable rapid continuous oil skimming with simple peristaltic pump. The oil recovering using a-BFJS realized high oil selectivity from xylene/water emulsion. Our demonstration of the high-performance aligned channel sorbent and scalable oil removing sponge offers an eco-friendly and promising strategy for efficiently removing oil from oil spills from water.

Anisotropic cellulose nanocrystalline sponge sheets with ultrahigh water fluxes and oil/water selectivity

Oily sewage caused by oil spill accidents has become a severe problem in the last decades. Hence, two-dimensional sheet-like filter materials for oil/water separation have received widespread attention. Porous sponge materials were developed using cellulose nanocrystals (CNCs) as raw materials. They are environmentally friendly and easy to prepare, with high flux and separation efficiency. The 1,2,3,4-butane tetracarboxylic acid cross-linked anisotropic cellulose nanocrystalline sponge sheet (B-CNC) exhibited ultrahigh water fluxes driven by gravity alone, depending on the aligned structure of channels and the rigidity of CNCs. Meanwhile, the sponge gained superhydrophilic/underwater superhydrophobic wettability with an underwater oil contact angle of up to 165.7° due to its ordered micro/nanoscale structure. B-CNC sheets displayed high oil/water selectivity without additional material doping or chemical modification. For oil/water mixtures, high separation fluxes of approximately 100,000 L·m^-2·h^-1 and separation efficiencies of up to 99.99 % were obtained. For a Tween 80-stabilized toluene-in-water emulsion, the flux reached >50,000 L·m^-2·h^-1, and the separation efficiency was above 99.7 %. B-CNC sponge sheets showed significantly higher fluxes and separation efficiencies than other bio-based two-dimensional materials. This research provides a facile and straightforward fabrication method of environmental-friendly B-CNC sponges for rapid, selective oil/water separation.

Photothermal and Concus Finn capillary assisted superhydrophobic fibrous network enabling instant viscous oil transport for crude oil cleanup

Rapid and effective removal of highly viscous oil spills from the sea remains a great challenge globally. Superhydrophobic materials are attractive candidates for handling oil spills, but they are restrained to recover oils with low viscosity exclusively. Herein, we report a novel polypyrrole wrapped superhydrophobic fibrous network using cross-shaped polyester fibers as starting blocks. The polypyrrole coating enables the absorbent to convert light to heat, ensuring that the viscosity of heavy oils in the proximity can be easily controlled. In the meanwhile, the special structure of the starting fibers initiates Concus Finn (CFin) capillary allowing instant oil transport in the network. When the absorbent is exposed to light oils (0-500 mPa.s), the oils can be transported instantly via CFin capillary. Interestingly, under synergistic effect of light-to-heat conversion and CFin capillary, a drawing-sticking crude oil strip (10⁵ mPa.s) is sucked instantly against gravity by the absorbent. The absorbent is successfully applied to efficiently separate both oil/water mixtures and oil/water emulsions (efficiency > 99%). Such absorbent can absorb 62.99-74.23 g/g light oils on average and up to 123.3 g/g crude oil under 0-2 sun illumination, holding a huge potential in managing oil spills.

An elastic MOF/graphene aerogel with high photothermal efficiency for rapid removal of crude oil

Due to the frequent spill accidents during crude oil exploration and transport, to rapidly cleanup crude oil and eliminate the environmental pollution of oil spill is in high demand. In this work, a three-dimensional graphene aerogel (MEGA) with high elasticity, photothermal conversion capacity and adsorption capacity was prepared for rapid removal of crude oil. The results showed that the as-prepared MEGA exhibited a layered structure, the octahedral HKUST-1 nanoparticles and hydrophobic polydimethylsiloxane (PDMS) coatings were uniformly deposited on the surface. Such a hierarchical micro-nano porous structure not only improved the aerogel's hydrophobicity (water contact angle in air up to 152.7°), but also endowed it with strong oil adsorption capacity (41-118 times of its own weight). Especially, the MEGA showed excellent photothermal conversion capacity. Under light irradiation, its temperature raised to 80 ℃ from room temperature in 100 s. As a result, the adsorption for one drop of crude oil by MEGA was shortened from 5 h to 40 s, comparing with that in dark condition. In addition, the MEGA showed remarkable elasticity and mechanical stability, it could maintain more than 90% efficiency after 10 adsorption-compression cycles. This study suggests that the prepared MEGA has great potential for rapid removal of crude oil.

Biomimetic hydrophobic plastic foams with aligned channels for rapid oil absorption

Although many oil absorption materials have been developed, it still remains a great challenge to achieve rapid absorption and efficient recovery. Over the past decade, research has focused on the development of freeze casting technology using water as a solvent. The materials prepared by this method have poor water resistance and are difficult to apply to oil absorption in aqueous environments. Here, an organic solvent freeze casting strategy is proposed to fabricate ultralight hydrophobic plastic foams with aligned channel structures. Through microscopy in situ observation, we revealed the growth morphology of ice crystals during directional freezing process. Moreover, aligned porous foams with various channel sizes are fabricated by regulating the cooling rate. We found that organic solvent-assisted freeze casting can enhance the hydrophobicity of the matrix material. These aligned porous foams exhibit excellent liquid absorption performance, with high absorption speed and large absorption capacity over a wide viscosity range. This approach has general applicability and can be used to tailor a wide variety of engineering plastic-based aligned porous foams, as long as they can dissolve in organic solvents.

Polyolefin-based electrospun fibrous matrices embedded with magnetic nanoparticles for effective removal of viscous oils

In this work, we present a poly (ethylene-co-1-octene)-based fibrous matrix prepared via electrospinning for highly efficient removal of viscous oils. The sorbent consisting of linear low density polyethylene (LLDPE) allows selective absorption of crude oil spills at the water surface without the need for additional isolation of the matrix prior to the refining process. Moreover, the high specific pore volume of the LLDPE sorbent with uniform fibrous morphology was shown to enable the sorbent reach 81.5 ± 5.9% of its equilibrium absorption capacity within 5 min. Furthermore, magnetic nanoparticles (MNP) are incorporated into each fiber comprising the matrix to facilitate the recovery process via external magnetic field without altering the intrinsic absorption capacity. We envision that these sorbents offer a sustainable route for the quick and thorough clean-up of spilled oil due to their high absorption capacity, fast absorption rate, ease of recovery, and absence of secondary waste.

Graphene Infrared Radiation Management Targeting Photothermal Conversion for Electric-Energy-Free Crude Oil Collection

Graphene has been widely used as a solar absorber for its broad-band absorption. However, targeting a higher photothermal efficiency, the intrinsic infrared radiation loss of graphene requires to be further reduced. Herein, band structure engineering is performed to modulate graphene infrared radiation. Nitrogen-doped vertical graphene is grown on quartz foam (NVGQF) by the plasma-enhanced chemical vapor deposition method. Under the premise of keeping high solar absorption (250-2500 nm), graphitic nitrogen doping effectively modulates the infrared emissivity (2.5-25 μm) of NVGQF from 0.96 to 0.68, reducing the radiation loss by ∼31%. Based on the excellent photothermal properties of NVGQF, a temperature-gradient-driven crude oil collecting raft is designed, where the crude oil flows along the collecting path driven by the viscosity gradient without any external electric energy input. Compared with a nondoped vertical graphene quartz foam raft, the NVGQF raft with a superior photothermal efficiency shows a significantly enhanced crude oil collecting efficiency by three times. The advances in this work suggest broad radiation-managed application platforms for graphene materials, such as seawater desalination and personal or building thermal management.

Solar-assisted high-efficient cleanup of viscous crude oil spill using an ink-modified plant fiber sponge

Rapid and efficient clean-up of viscous crude oil spills is still a global challenge due to its high viscous and poor flowability at room temperature. The hydrophobic/oleophilic absorbents with three-dimensional porous structure have been considered as a promising candidate to handle oil spills. However, they still have limited application in recovering the high viscous oil. Inspired by the viscosity of crude oil depended on the temperature, a solar-heated ink modified plant fiber sponge (PFS@GC) is fabricated via a simple and environmentally friendly physical foaming strategy combined with in-situ ink coating treatment. After wrapping by the polydimethylsiloxane (PDMS), the modified PFS@GC (PFS@GC@PDMS) exhibits excellent compressibility, high hydrophobic (141° in water contact angle), solar absorption (> 96.0%), and oil absorptive capacity (12.0-27.8 g/g). Benefiting from the favorable mechanical property and photothermal conversion capacity, PFS@GC@PDMS is demonstrated as a high-performance absorbent for crude oil clean-up and recovery. In addition, PFS@GC@PDMS can also be applied in a continuous absorption system for uninterrupted recovering of oil spills on the water surface. The proposed solar-heated absorbent design provides a new opportunity for exploring biomass in addressing large-scale oil spill disasters.

Funnel-Shaped Floating Vessel Oil Skimmer with Joule Heating Sorption Functionality

Floating vessel-type oil collecting devices based on sorbent materials present potential solutions to oil spill cleanup that require a massive amount of sorbent material and manual labor. Additionally, continuous oil extraction from these devices presents opportunities for highly energy-efficient oil skimmers that use gravity as the oil/water separation mechanism. Herein, a sorbent-based oil skimmer (SOS) is developed with a novel funnel-shaped sorbent and vessel design for efficient and continuous extraction of various oils from the water surface. A carbon black (CB) embedded polydimethylsiloxane (PDMS) sponge material is characterized and used as the sorbent in the SOS. The nanocomposite sponge formulation is optimized for high reusability, hydrophobicity, and rapid oil absorption. Joule heating functionality of the sponge is also explored to rapidly absorb highly viscous oils that are a significant challenge for oil spill cleanup. The optimized sponge material with the highest porosity and 15 wt% CB loading is tested in the SOS for large-scale oil spill extraction tests and shows effective cleaning of oil spilled on the water surface. The SOS demonstrates a high maximum extraction rate of 200 mL/min for gasoline and maintains a high extraction rate performance upon reuse when the sponge funnel is cleaned and dried.

Novel fabrication of hydrophobic/oleophilic human hair fiber for efficient oil/water separation through one-pot dip-coating synthesis route

Frequent oil spill accidents and industrial wastewater discharge has always been one of the most severe worldwide environmental problems. To cope with this problem, many fluorine-containing and high-cost materials with superwettability have been extensively applied for oil-water separation, which hinders its large-scale application. In this work, a novel human hair fiber (HHF)-polymerized octadecylsiloxane (PODS) fiber was fabricated with a facile one-pot dip-coating synthesis approach, inspired by the self-assembly performance and hydrophobicity of OTS modification. The benefits of prominent hydrophobic/lipophilic behavior lie in the low surface energy, and a rough PODS coating was rationally adhered on the surface of HHF. Driven solely by gravity and capillary force, the HHF-PODS showed excellent oil/water separation efficiency (> 99.0%) for a wide range of heavy and light oil/water mixtures. In addition, HHF-PODS demonstrated durability toward different harsh environments like alkaline, acid, and salty solutions.

Biomass poplar catkin fiber-based superhydrophobic aerogel with tubular-lamellar interweaved neurons-like structure

Superhydrophobic aerogels are attractive candidates in controlling oil spills. The major challenges for existing aerogels are the construction of mechanical endurance as well as accessible of building materials. Herein, a newfangled biomass superhydrophobic aerogel (M-PCF/CS) with both superior compressibility and oil caption speed is fabricated by assembling poplar catkin fiber (PCF) hollowed-out shell of 330 nm and chitosan (CS) into tubular-lamellar interweaved neurons-like structure. The resultant aerogels (porosity ~ 96.12%), with flexuous PCF as the elastic buffer and second-pore capillaries, exhibit large longitudinal and transverse compressibility, endurable fatigue tolerance, fast oil sorption rate with a capacity of 28.8-78.1 g/g at 5-25 s. In parallel, the aerogels are tolerant of NaCl, UV radiation, and organic solvents without superhydrophobic variation and a case of oil spill remediation via pump-supported experiment shows that the aerogels facilely achieve continuous oil recycling from seawater by 23052-43956 L·m^-2·h^-1. Furthermore, the resultant M-PCF/CS, with assistance of an oscillator, can be applied to separate oil/water emulsions with efficiency of 98.07-99.11%. The successful fabrication of this material provides a new design strategy for the construction of mechanically robust aerogels for speedy and economical cleanup of oil pollutants from water.

Implementing an Air Suction Effect Induction Strategy to Create Super Thermally Insulating and Superelastic SiC Aerogels

Silicon carbide (SiC) aerogels are promising thermal insulators that are lightweight and possess high thermal stability. However, their application is hindered by their brittleness. Herein, an air suction effect induction (ASEI) strategy is proposed to fabricate a super thermally insulating SiC aerogel (STISA). The ASEI strategy exploits the air suction effect to subtly regulate the directional flow of the SiO gas, which can induce directional growth and assembly of SiC nanowires to form a directional lamellar structure. The sintering time is significantly reduced by >90%. Significant improvements in the compression and elasticity performance of the STISA are achieved upon the formation of a directional lamellar structure through the ASEI strategy. Moreover, the lamellar structure endows the STISA with an ultralow thermal conductivity of 0.019 W m^-1 K^-1 . The ASEI strategy paves the way for structural design of advanced ceramic aerogels for super thermal insulation.

A Novel Porous PDMS-AgNWs-PDMS (PAP)-Sponge-Based Capacitive Pressure Sensor

The development of capacitive pressure sensors with low cost, high sensitivity and facile fabrication techniques is desirable for flexible electronics and wearable devices. In this project, a highly sensitive and flexible capacitive pressure sensor was fabricated by sandwiching a porous PAP sponge dielectric layer between two copper electrodes. The porous PAP sponge dielectric layer was fabricated by introducing highly conductive silver nanowires (AgNWs) into the PDMS sponge with 100% sucrose as a template and with a layer of polydimethylsiloxane (PDMS) film coating the surface. The sensitivity of the PAP sponge capacitive pressure sensor was optimized by increasing the load amount of AgNWs. Experimental results demonstrated that when the load amount of AgNWs increased to 150 mg in the PAP sponge, the sensitivity of the sensor was the highest in the low-pressure range of 0–1 kPa, reaching 0.62 kPa−1. At this point, the tensile strength and elongation of sponge were 1.425 MPa and 156.38%, respectively. In addition, the specific surface area of PAP sponge reached 2.0 cm2/g in the range of 0–10 nm pore size, and showed excellent waterproof performance with high elasticity, low hysteresis, light weight, and low density. Furthermore, as an application demonstration, ~110 LED lights were shown to light up when pressed onto the optimized sensor. Hence, this novel porous PAP-sponge-based capacitive pressure sensor has a wide range of potential applications in the field of wearable electronics.

Thermally Conductive and Superhydrophobic Polyurethane Sponge for Solar-Assisted Separation of High-Viscosity Crude Oil from Water

The rapid and effective separation of high-viscosity heavy crude oil from seawater is a worldwide challenge. Herein, an ultralow density, photothermal, superhydrophobic, and thermally conductive polyurethane/polyaniline/hexagonal boron nitride@Fe₃O₄/polyacrylic-oleic acid resin sponge (PU/PANI/h-BN@Fe₃O₄/AR) was fabricated with a water contact angle (WCA) of 158°, thermal conductivity of 0.76 W m^-1 K^-1, density of 0.038 g cm^-3, limited oxygen index (LOI) of 28.82%, and porosity of 97.97% and used for solar-assisted separation of high-viscosity crude oil from water. Photothermal components were composed of PANI and Fe₃O₄, while h-BN particles were used as thermally conductive and flame retardant fillers. Therefore, the illuminated sunlight irradiation on the modified sponge was converted to heat due to the activity of photothermal components. The produced heat was rapidly transferred to the environment due to the presence of h-BN for increasing the temperature of the high-viscosity crude oil and reducing oil viscosity that helped to promote its fluidity and effective absorption. The crude oil absorption capacity of this sponge increased from 4 to 57 g g^-1 under irradiation of a sunlight simulator (power: 1 sun: 1 kW m^-2) for 17 min due to oil viscosity reduction from 2.46 × 10⁴ to below 100 mPa s followed by an increase in the surface temperature from 26 to 89 °C. Also, the oil absorption capacity was evaluated in a static state (172 g g^-1 for chloroform), under different external magnetic fields (140.7 g g^-1 for gasoline), and in a continuous state, which was 65,100 times of its own weight in the gasoline filtration process. The PU/PANI/h-BN@Fe₃O₄/AR sponge exhibited excellent stability against 20 times of reusing, mechanical compression, abrasion, immersing in various pH solutions, seawater, and high temperature. In all, the results confirmed that the prepared sponge is an excellent absorbent for organic solvents and highly viscous crude oil in the absence and presence of sunlight irradiation.

Novel Ti3C2Tx MXene wrapped wood sponges for fast cleanup of crude oil spills by outstanding Joule heating and photothermal effect

Remediation of crude oil spills is a great challenge owing to the poor mobility and high viscosity of crude oil. Herein, a porous polydimethylsiloxane@wood sponge/MXene (PDMS@WSM) with outstanding compressibility and hydrophobic/lipophilic ability was demonstrated as crude oil absorbent. The surface temperature of PDMS@WSM could quickly rise to 80 °C with a working voltage of 4 V and to 66 °C under simulated sunlight irradiation of 1.5 KW m^-2, respectively. Due to the excellent Joule heating and photothermal conversion effect, the PDMS@WSM displayed maximum adsorption capacity of 11.2×10⁵ g m^-3 within 6 min. The PDMS@WSM showed preferable reusability and cycle stability because of its brilliant compressibility. Moreover, the oil-collecting device based on PDMS@WSM could continuously collect crude oil spills, achieving an active collection of 25 mL crude oil within 150 s. Therefore, the porous PDMS@WSM absorbent exhibited great potential for crude oil spills remediation, energy regulation, and desalination of hypersaline water.

Easily Fabricated Low-Energy Consumption Joule-Heated Superhydrophobic Foam for Fast Cleanup of Viscous Crude Oil Spills

Effective cleanup of viscous crude oil spills remains a persistent and crippling challenge. Herein, this work presents a Joule-heated superhydrophobic flower-like Cu₈(PO₃OH)₂(PO₄)₄·7H₂O-coated copper foam (SHB-CF@CP) for rapid cleanup of viscous crude oil spills via a facile strategy. The SHB-CF@CP shows outstanding water repellency and excellent stability of hydrophobicity in harsh environments. Due to the high electrical conductivity and thermal conductivity, it requires lower power energy consumption (less than 1 V of voltage input) to raise the temperature significantly, which dramatically reduces the viscosity of crude oil (from ∼2 × 10⁵ to ∼60 mPa s) and then increases the oil absorption rate, effectively avoiding the poor mobility and ineffective absorption of viscous crude oil. Notably, the SHB-CF@CP can achieve continuous and quick cleanup of crude oil under in situ pumping force. The high-performance Joule-heated SHB-CF@CP sorbent with a strong porous skeleton, corrosion resistance, and low predicted operational costs holds a promise of promoting its practical applications in the cleanup of intractable and large-area viscous oil spills.

Janus Metal-Organic Frameworks/Wood Aerogel Composites for Boosting Catalytic Performance by Le Châtelier's Principle

Elaborate design of metal-organic frameworks (MOFs) composites with enhanced properties is of fundamental interest and practical importance in the fields of catalysis. Typical strategies are usually focused on how to increase MOFs contents while lacking architecture design for performance improvements. Herein, we first report MOFs composites with Janus structures to boost catalytic performance by Le Châtelier's principle when using wood aerogel as a versatile platform. Janus structures mean that one part of the composite is still wood aerogel while the other part is decorated with MOFs. The underoil hydrophilicity of the wood aerogels endows the Janus composites with dehydration capacity for promoting the equilibrium movement so as to boost the catalytic performance. The catalytic performance of Janus composites for the Knoevenagel reaction increases more than 40% compared with those symmetric composites. Moreover, both the final conversion and the reaction rate are much better for the Janus composites than other state-of-the-art heterogeneous ZIF-8-based catalysts. Our design is general and paves the way to exploit composites with special architecture.

Concus Finn Capillary driven fast viscous oil-spills removal by superhydrophobic cruciate polyester fibers

Developing functional materials integrating multi-tasking oil/water separation performances is significant but challenging for the remediation of large-scale oil spills causing pernicious environmental damages. Herein, a novel Concus Finn Capillary driven oil sorbent (OSCPF) fabricated by aligning superhydrophobic cruciate polyester fibers based on yarn spinning mechanism is designed to realize the clean-up of oil spills and various oil/water mixtures at high speeds. Instantaneous oil diffusion is achieved by abrupt Concus Finn Capillary driven oil-flows along aligned channels. This advance reduces the penetrating time for viscous crude oils by 95.00% comparing with that of non-oriented circular polyester fibers. The OSCPF possess great oil sorption capacity of 54.36-124.71 g/g and can separate oils from immiscible oil/water mixtures, including seawater, soap-water, CuCl₂-water, and KMnO₄-water, and surfactant-stabilized O/W emulsions by the way of adsorption with satisfactory separation efficiency (99.41-99.83%). Especially, the OSCPF is effectively used to enclose oil spills to prevent rapid oil diffusion and in-situ continuously collect the spillages from water surface and underwater by pumping device with recovery rates of 15,727-104,227 L·m^-2·h^-1. Considering the unique structural design, fast oil sorption speed, and low operating cost, this work provides a prospective oil remover addressing the remediation of catastrophic multi-tasking oil/water pollutions.

Solar-assisted isotropically thermoconductive sponge for highly viscous crude oil spill remediation

Efficiently cleaning up high-viscosity crude oil spills is still a serious global problem. In this paper, a composite filler PPy-polydopamine/BN (PPB) with high photothermal effect and high thermal conductivity was first prepared. Then the polyurethane sponge is decorated with polydimethylsiloxane and PPB to obtain a solar-assisted isotropically thermoconductive adsorbent (PPB@PU), which exhibits remarkable stability and durable mechanical properties. Meanwhile, the PPB@PU sponge has good thermal conductivity, and its surface temperature rises to 91°C in just 1 min under irradiation (1 sun). Therefore, the PPB@PU sponge can quickly heat and adsorb the crude oil contacted by the surface, significantly speed up the crude oil recovery process, and the adsorption capacity is as high as about 45 g/g. Finally, the oil adsorption method of the three-dimensional adsorbent is demonstrated, which provides a new idea for the subsequent development of advanced oil spill adsorbent.

•

PPB@PU sponge exhibits good superhydrophobic/lipophilicity and mechanical stability

•

PPB@PU sponge has outstanding photothermal conversion and thermal conductivity

•

PPB@PU sponge can efficiently recover heavy oil for large-scale oil spill cleanup