Enhancing the Biomechanical Performance of Anisotropic Nanofibrous Scaffolds in Tendon Tissue Engineering: Reinforcement with Cellulose Nanocrystals

Multiaxial filament winding of biopolymer microfibers with a collagen resin binder for orthobiologic medical device biomanufacturing

Multiaxial filament winding is an additive manufacturing technique used extensively in large industrial and military manufacturing yet unexplored for biomedical uses. This study adapts filament winding to biomanufacture scalable, strong, three-dimensional microfiber (3DMF) medical device implants for potential orthopedic applications. Polylactide microfiber filaments were wound through a collagen 'resin' bath to create organized, stable orthobiologic implants, which are sized for common ligament (e.g. anterior cruciate ligament) and tendon (e.g. rotator cuff) injuries and can be manufactured at industrial scale using a small footprint, economical, high-output benchtop system. Ethylene oxide or electron beam sterilized 3DMF samples were analyzed by scanning electron microscopy (SEM), underwent ASTM1635-based degradation testing, tensile testing, ISO 10993-based cytocompatibility, and biocompatibility testing, quantified for human platelet-rich plasma (PRP) absorption kinetics, and examined for adhesion of bioceramics and lyophilized collagen after coating. 3DMF implants had consistent fiber size and high alignment by SEM. Negligible mass and strength loss were noted over 4 months in culture. 3DMF implants initially exceeded 1000 N hydrated tensile strength and retained over 70% strength through 4 months in culture, significantly stronger than conventionally produced implants made by fused fiber deposition 3D printing. 3DMF implants absorbed over 3xtheir weight in PRP within 5 min, were cytocompatible and biocompatible in vivo in rabbits, and could readily bind tricalcium phosphate and calcium carbonate coatings discretely on implant ends for further orthobiologic material functionalization. The additive manufacturing process further enabled engineering implants with suture-shuttling passages for facile arthroscopic surgical delivery. This accessible, facile, economical, and rapid microfiber manufacturing platform presents a new method to engineer high-strength, flexible, low-cost, bio-based implants for orthopedic and extended medical device applications.

Advancements in scaffold for treating ligament injuries; in vitro evaluation

Tendon/ligament (T/L) injuries are a worldwide health problem that affects millions of people annually. Due to the characteristics of tendons, the natural rehabilitation of their injuries is a very complex and lengthy process. Surgical treatment of a T/L injury frequently necessitates using autologous or allogeneic grafts or synthetic materials. Nonetheless, these alternatives have limitations in terms of mechanical properties and histocompatibility, and they do not permit the restoration of the original biological function of the tissue, which can negatively impact the patient's quality of life. It is crucial to find biological materials that possess the necessary properties for the successful surgical treatment of tissues and organs. In recent years, the in vitro regeneration of tissues and organs from stem cells has emerged as a promising approach for preparing autologous tissue and organs, and cell culture scaffolds play a critical role in this process. However, the biological traits and serviceability of different materials used for cell culture scaffolds vary significantly, which can impact the properties of the cultured tissues. Therefore, this review aims to analyze the differences in the biological properties and suitability of various materials based on scaffold characteristics such as cell compatibility, degradability, textile technologies, fiber arrangement, pore size, and porosity. This comprehensive analysis provides valuable insights to aid in the selection of appropriate scaffolds for in vitro tissue and organ culture.

Biofabrication of Composite Tendon Constructs with the Fibrous Arrangement, High Cell Density, and Enhanced Cell Alignment

Current tissue-engineered tendons are mostly limited to the replication of fibrous organizations of native tendons, which lack the biomimicry of a densely packed cell arrangement. In this study, composite tendon constructs (CTCs) with fibrous arrangement, high cell density, and enhanced cell alignment were developed by integrating the electrohydrodynamic jet 3D printing (e-jetting) technique and the fabrication of tissue strands (TSs). A tubular polycaprolactone (PCL) scaffold was created using e-jetting, followed by coating a thin layer of alginate. Human mesenchymal stem cells were then microinjected into the PCL scaffolds, aggregated into TSs, and formed CTCs with a core-shell structure. Owing to the presence of TSs, CTCs demonstrated the anatomically relevant cell density and morphology, and cells migrated from the TSs onto e-jetted scaffolds. Also, the mechanical strength of CTCs approached that of native tendons due to the existence of e-jetted scaffolds (Young's modulus: ∼21 MPa, ultimate strength: ∼5 MPa). During the entire culture period, CTCs maintained high survival rates and good structural integrity without the observation of necrotic cores and disintegration of two portions. In addition, CTCs that were cultured with uniaxial cyclic stretching revealed not only the increased expression of tendon-related proteins but also the enhanced cellular orientation. The promising results demonstrated the potential of this novel biofabrication strategy for building tissue-engineered tendon constructs with the proper biological, mechanical, and histological relevance..

Tendon Repair and Regeneration Using Bioinspired Fibrillation Engineering That Mimicked the Structure and Mechanics of Natural Tissue

Replicating the controlled nanofibrillar architecture of collagenous tissue represents a promising approach in the design of tendon replacements that have tissue-mimicking biomechanics─outstanding mechanical strength and toughness, defect tolerance, and fatigue and fracture resistance. Guided by this principle, a fibrous artificial tendon (FAT) was constructed in the present study using an engineering strategy inspired by the fibrillation of a naturally spun silk protein. This bioinspired FAT featured a highly ordered molecular and nanofibrillar architecture similar to that of soft collagenous tissue, which exhibited the mechanical and fracture characteristics of tendons. Such similarities provided the motivation to investigate FAT for applications in Achilles tendon defect repair. In vitro cellular morphology and expression of tendon-related genes in cell culture and in vivo modeling of tendon injury clearly revealed that the highly oriented nanofibrils in the FAT substantially promoted the expression of tendon-related genes combined with the Achilles tendon structure and function. These results provide confidence about the potential clinical applications of the FAT.

Bioactive Nanostructured Scaffold-Based Approach for Tendon and Ligament Tissue Engineering

An effective therapeutic strategy to treat tendon or ligament injury continues to be a clinical challenge due to the limited natural healing capacity of these tissues. Furthermore, the repaired tendons or ligaments usually possess inferior mechanical properties and impaired functions. Tissue engineering can restore the physiological functions of tissues using biomaterials, cells, and suitable biochemical signals. It has produced encouraging clinical outcomes, forming tendon or ligament-like tissues with similar compositional, structural, and functional attributes to the native tissues. This paper starts by reviewing tendon/ligament structure and healing mechanisms, followed by describing the bioactive nanostructured scaffolds used in tendon and ligament tissue engineering, with emphasis on electrospun fibrous scaffolds. The natural and synthetic polymers for scaffold preparation, as well as the biological and physical cues offered by incorporating growth factors in the scaffolds or by dynamic cyclic stretching of the scaffolds, are also covered. It is expected to present a comprehensive clinical, biological, and biomaterial insight into advanced tissue engineering-based therapeutics for tendon and ligament repair.

Biomimetic Scaffolds for Tendon Tissue Regeneration

Tendon tissue connects muscle to bone and plays crucial roles in stress transfer. Tendon injury remains a significant clinical challenge due to its complicated biological structure and poor self-healing capacity. The treatments for tendon injury have advanced significantly with the development of technology, including the use of sophisticated biomaterials, bioactive growth factors, and numerous stem cells. Among these, biomaterials that the mimic extracellular matrix (ECM) of tendon tissue would provide a resembling microenvironment to improve efficacy in tendon repair and regeneration. In this review, we will begin with a description of the constituents and structural features of tendon tissue, followed by a focus on the available biomimetic scaffolds of natural or synthetic origin for tendon tissue engineering. Finally, we will discuss novel strategies and present challenges in tendon regeneration and repair.

Nanomaterial-Based Scaffolds for Tissue Engineering Applications: A Review on Graphene, Carbon Nanotubes and Nanocellulose

Nanoscale biomaterials have garnered immense interest in the scientific community in the recent decade. This review specifically focuses on the application of three nanomaterials, i.e., graphene and its derivatives (graphene oxide, reduced graphene oxide), carbon nanotubes (CNTs) and nanocellulose (cellulose nanocrystals or CNCs and cellulose nanofibers or CNFs), in regenerating different types of tissues, including skin, cartilage, nerve, muscle and bone. Their excellent inherent (and tunable) physical, chemical, mechanical, electrical, thermal and optical properties make them suitable for a wide range of biomedical applications, including but not limited to diagnostics, therapeutics, biosensing, bioimaging, drug and gene delivery, tissue engineering and regenerative medicine. A state-of-the-art literature review of composite tissue scaffolds fabricated using these nanomaterials is provided, including the unique physicochemical properties and mechanisms that induce cell adhesion, growth, and differentiation into specific tissues. In addition, in vitro and in vivo cytotoxic effects and biodegradation behavior of these nanomaterials are presented. We also discuss challenges and gaps that still exist and need to be addressed in future research before clinical translation of these promising nanomaterials can be realized in a safe, efficacious, and economical manner.

Platelet-Derived Extracellular Vesicles Promote Tenogenic Differentiation of Stem Cells on Bioengineered Living Fibers

Tendon mimetic scaffolds that recreate the tendon hierarchical structure and niche have increasing potential to fully restore tendon functionality. However, most scaffolds lack biofunctionality to boost the tenogenic differentiation of stem cells. In this study, we assessed the role of platelet-derived extracellular vesicles (EVs) in stem cells' tenogenic commitment using a 3D bioengineered in vitro tendon model. First, we relied on fibrous scaffolds coated with collagen hydrogels encapsulating human adipose-derived stem cells (hASCs) to bioengineer our composite living fibers. We found that the hASCs in our fibers showed high elongation and cytoskeleton anisotropic organization, typical of tenocytes. Moreover, acting as biological cues, platelet-derived EVs boosted the hASCs' tenogenic commitment, prevented phenotypic drift, enhanced the deposition of the tendon-like extracellular matrix, and induced lower collagen matrix contraction. In conclusion, our living fibers provided an in vitro system for tendon tissue engineering, allowing us to study not only the tendon microenvironment but also the influence of biochemical cues on stem cell behavior. More importantly, we showed that platelet-derived EVs are a promising biochemical tool for tissue engineering and regenerative medicine applications that are worthy of further exploration, as paracrine signaling might potentiate tendon repair and regeneration.

Nano-calcium silicate mineralized fish scale scaffolds for enhancing tendon-bone healing

Tendon-bone healing is essential for an effective rotator cuff tendon repair surgery, however, this remains a significant challenge due to the lack of biomaterials with high strength and bioactivity. Inspired by the high-performance exoskeleton of natural organisms, we set out to apply natural fish scale (FS) modified by calcium silicate nanoparticles (CS NPs) as a new biomaterial (CS-FS) to overcome the challenge. Benefit from its “Bouligand” microstructure, such FS-based scaffold maintained excellent tensile strength (125.05 MPa) and toughness (14.16 MJ/m³), which are 1.93 and 2.72 times that of natural tendon respectively, allowing it to well meet the requirements for rotator cuff tendon repair. Additionally, CS-FS showed diverse bioactivities by stimulating the differentiation and phenotypic maintenance of multiple types of cells participated into the composition of tendon-bone junction, (e.g. bone marrow mesenchymal stem cells (BMSCs), chondrocyte, and tendon stem/progenitor cells (TSPCs)). In both rat and rabbit rotator cuff tear (RCT) models, CS-FS played a key role in the tendon-bone interface regeneration and biomechanical function, which may be achieved by activating BMP-2/Smad/Runx2 pathway in BMSCs. Therefore, natural fish scale -based biomaterials are the promising candidate for clinical tendon repair due to their outstanding strength and bioactivity.

•

Nano-calcium silicate mineralized fish scale scaffold was first developed for tendon defect repair.

•CS-FS exhibited excellent mechanical properties superior to those of natural tendon.

•CS-FS showed diverse bioactivities by stimulating the differentiation of multiple types of cells.

•CS NPs accelerated tendon-bone interface tendon-bone healing enhancement and biomechanical recovery.

Elastic Fluorescent Protein-Based Down-Converting Optical Films for Flexible Display

Protein-based material design provides great advantages to developing smart biomaterials with tunable structures and desired functions. They have been widely used in many biomedical applications including tissue engineering and drug delivery. However, protein-based materials are not yet widely used in optoelectronic materials despite their excellent optical and tunable mechanical properties. Here, we synthesized engineered fluorescent proteins (FPs) fused with elastic protein for the development of optoelectrical down-converting optical filters for flexible display materials. We synthesized sequence-specific FPs to tune blue, green, yellow, and red colors and fused them with elastic protein to tune mechanical properties. We fabricated flexible self-supporting film materials and characterized mechanical properties and down-converting optical properties. We also fabricated a hybrid light-emitting diode (LED) to down convert blue to desired green, red, and white colors. Furthermore, we constructed a flexible white LED using organic LED as a flexible substrate. Our modular synthesis approach of tunable bio-optoelectrical material approaches will be useful to design future biocompatible and flexible display materials and technologies.

Wetspun Polymeric Fibrous Systems as Potential Scaffolds for Tendon and Ligament Repair, Healing and Regeneration

Tendon and ligament traumatic injuries are among the most common diagnosed musculoskeletal problems. Such injuries limit joint mobility, reduce musculoskeletal performance, and most importantly, lower people's comfort. Currently, there are various treatments that are used to treat this type of injury, from surgical to conservative treatments. However, they're not entirely effective, as reinjures are frequent and, in some cases, fail to re-establish the lost functionality. Tissue engineering (TE) approaches aim to overcome these disadvantages by stimulating the regeneration and formation of artificial structures that resemble the original tissue. Fabrication and design of artificial fibrous scaffolds with tailored mechanical properties are crucial for restoring the mechanical function of the tissues. Recently, polymeric nanofibers produced by wetspinning have been largely investigated to mimic, repair, and replace the damaged tissue. Wetspun fibrous structures are extensively used due to their exceptional properties, such as the ability to mimic the native tissue, their biodegradability and biocompatibility, and good mechanical properties. In this review, the tendon and ligament structure and biomechanics are presented. Then, promising wetspun multifunctional fibrous structures based on biopolymers, more specifically polyhydroxyalkanoates (PHA), polycaprolactone (PCL), and polyethylenes, will be discussed, as well as reinforcing agents such as cellulose nanocrystals (CNC), nanoparticles, and growth factors.

Fabrication and characterization of super-hydrophilic poly (ε-caprolactone)/hydroxypropyl methylcellulose (HPMC) based composite electrospun membranes for tissue engineering applications

Tissue engineering (TE) employs scaffolds as a structural support for initially seeding of cells followed by development of new tissues. Electrospun scaffolds generally function as a template of native extracellular matrix (ECM). The chemical composition of the scaffold and its surface morphology strongly influence the interaction between various cell types and materials. In this work, PCL and PCL/HPMC-based composite membranes with varying concentrations of HPMC (20-30% by weight) were fabricated using electrospinning technique. The membranes were evaluated for their surface, physio-chemical and biological properties. It was observed probably for the first time that blending of HPMC with PCL produced super-hydrophilic scaffolds. DSC studies confirmed the semi- crystalline nature of HPMC. PCL/HPMC composite scaffolds are found biocompatible from cytotoxicity assay. From the cell culture studies (apoptosis), PCL/HPMC composite scaffolds did not inhibit the adhesion of L929 cells due to their super-hydrophilic nature. The cell adhesion and spreading varied with HPMC concentration. PCL/HPMC (70/30) membranes showed highest cell adhesion among others due to its porous structure.

Preparation and in vitro biocompatibility of PBAT and chitosan composites for novel biodegradable cardiac occluders

The biodegradable composites were prepared by melt blending of chitosan (CS) and poly(butyleneadipate-co-terephthalate) (PBAT). By utilizing Fourier transformed infrared spectroscopy, scanning electron microscopy-energy dispersive spectroscopy, mechanical properties analysis, water contact angle measuring, differential scanning calorimetry, and thermogravimetric analysis, it was demonstrated that the CS of the PBAT-CS10 composite was relatively evenly dispersed in the PBAT matrix, the mechanical properties were significantly improved, the hydrophilicity was increased, the cold crystallization temperature was increased, and a good range of melt working temperature was obtained. The PBAT-CS10 composite was used to fabricate a cardiac occluder by fused deposition modeling of three-dimensional printing, and finite element analysis, and in vitro implantation testing proved the occluder’s mechanical support and sealing function under extreme boundary conditions. In vitro degradation experiments, neutral red uptake cytotoxicity assay, CCK-8 cell proliferation detection, immunofluorescence staining of the cytoskeleton, cell apoptosis detection, and reactive oxygen species assay were all performed on the composite, confirming that it and the occluder made of it could be hydrolyzed under physiological conditions and had no adverse effects on the cell membrane, lysosome membrane, cell proliferation, cell morphology, cell apoptosis, or ROS level, and had good biocompatibility.

The tendon microenvironment: Engineered in vitro models to study cellular crosstalk

Tendinopathy is a multi-faceted pathology characterized by alterations in tendon microstructure, cellularity and collagen composition. Challenged by the possibility of regenerating pathological or ruptured tendons, the healing mechanisms of this tissue have been widely researched over the past decades. However, so far, most of the cellular players and processes influencing tendon repair remain unknown, which emphasizes the need for developing relevant in vitro models enabling to study the complex multicellular crosstalk occurring in tendon microenvironments. In this review, we critically discuss the insights on the interaction between tenocytes and the other tendon resident cells that have been devised through different types of existing in vitro models. Building on the generated knowledge, we stress the need for advanced models able to mimic the hierarchical architecture, cellularity and physiological signaling of tendon niche under dynamic culture conditions, along with the recreation of the integrated gradients of its tissue interfaces. In a forward-looking vision of the field, we discuss how the convergence of multiple bioengineering technologies can be leveraged as potential platforms to develop the next generation of relevant in vitro models that can contribute for a deeper fundamental knowledge to develop more effective treatments.

Bioengineered 3D Living Fibers as In Vitro Human Tissue Models of Tendon Physiology and Pathology

Clinically relevant in vitro models of human tissue's health and disease are urgently needed for a better understanding of biological mechanisms essential for the development of novel therapies. Herein, physiological (healthy) and pathological (disease) tendon states are bioengineered by coupling the biological signaling of platelet lysate components with controlled 3D architectures of electrospun microfibers to drive the fate of human tendon cells in different composite living fibers (CLFs). In the CLFs-healthy model, tendon cells adopt a high cytoskeleton alignment and elongation, express tendon-related markers (scleraxis, tenomodulin, and mohawk) and deposit a dense tenogenic matrix. In contrast, cell crowding with low preferential orientation, high matrix deposition, and phenotypic drift leading to increased expression of nontendon related and fibrotic markers, are characteristics of the CLFs-diseased model. This diseased-like profile, also reflected in the increase of COL3/COL1 ratio, is further evident by the imbalance between matrix remodeling and degradation effectors, characteristic of tendinopathy. In summary, microengineered 3D in vitro models of human tendon healthy and diseased states are successfully fabricated. Most importantly, these innovative and versatile microphysiological models offer major advantages over currently used systems, holding promise for drugs screening and development of new therapies.

A Review of Recent Advances in Natural Polymer-Based Scaffolds for Musculoskeletal Tissue Engineering

The musculoskeletal (MS) system consists of bone, cartilage, tendon, ligament, and skeletal muscle, which forms the basic framework of the human body. This system plays a vital role in appropriate body functions, including movement, the protection of internal organs, support, hematopoiesis, and postural stability. Therefore, it is understandable that the damage or loss of MS tissues significantly reduces the quality of life and limits mobility. Tissue engineering and its applications in the healthcare industry have been rapidly growing over the past few decades. Tissue engineering has made significant contributions toward developing new therapeutic strategies for the treatment of MS defects and relevant disease. Among various biomaterials used for tissue engineering, natural polymers offer superior properties that promote optimal cell interaction and desired biological function. Natural polymers have similarity with the native ECM, including enzymatic degradation, bio-resorb and non-toxic degradation products, ability to conjugate with various agents, and high chemical versatility, biocompatibility, and bioactivity that promote optimal cell interaction and desired biological functions. This review summarizes recent advances in applying natural-based scaffolds for musculoskeletal tissue engineering.

Scaffold Engineering with Flavone-Modified Biomimetic Architecture for Vascular Tissue Engineering Applications

BACKGROUND

Vascular intimal hyperplasia (IH) is one of the key challenges in the clinical application of small-diameter vascular grafts. Current tissue engineering strategies focus on vascularization and antithrombotics, yet few approaches have been developed to treat IH. Here, we designed a tissue-engineered vascular scaffold with portulaca flavonoid (PTF) composition and biomimetic architecture.

METHOD

By electrospinning, PTF is integrated with biodegradable poly(ε-caprolactone) (PCL) into a bionic vascular scaffold. The structure and functions of the scaffolds were evaluated based on material characterization and cellular biocompatibility. Human vascular smooth muscle cells (HVSMCs) were cultured on scaffolds for up to 14 days.

RESULTS

The incorporation of PTF and preparation parameters during fabrication influences the morphology of the scaffold, including fibre diameter, structure, and orientation. Compared to the PCL scaffold, the scaffolds integrated with bioactive PTF show better hydrophilicity and degradability. HVSMCs seeded on the scaffold alongside the fibres exhibit fusiform-like shapes, indicating that the scaffold can provide contact guidance for cell morphology alterations. This study demonstrates that the PCL/PTF (9.1%) scaffold inhibits the excessive proliferation of HVSMCs without causing cytotoxicity.

CONCLUSION

The study provides insights into the problem of restenosis caused by IH. This engineered vascular scaffold with complex function and preparation is expected to be applied as a substitute for small-diameter vascular grafts.

Therapeutic Effects of Platelet-Derived Extracellular Vesicles in a Bioengineered Tendon Disease Model

Tendon injuries represent over 30–50% of musculoskeletal disorders worldwide, yet the available therapies do not provide complete tendon repair/regeneration and full functionality restoring. Extracellular vesicles (EVs), membrane-enclosed nanoparticles, have emerged as the next breakthrough in tissue engineering and regenerative medicine to promote endogenous tissue regeneration. Here, we developed a 3D human in vitro model mimicking the signature of pathological tendon and used it to evaluate the influence that different platelet-derived EVs might have in tendon tissue repair mechanisms. For this, different EV populations isolated from platelets, small EVs (sEVs) and medium EVs (mEVs), were added to the culture media of human tendon-derived cells (hTDCs) cultured on isotropic nanofibrous scaffolds. The platelet-derived EVs increased the expression of tenogenic markers, promoted a healthy extracellular matrix (ECM) remodeling, and the synthesis of anti-inflammatory mediators. These findings suggest that platelet EVs provided relevant biochemical cues that potentiated a recovery of hTDCs phenotype from a diseased to a healthy state. Thus, this study opens new perspectives for the translation of platelet-derived EVs as therapeutics.

Fabrication of Polymer/Graphene Biocomposites for Tissue Engineering

Graphene-based materials (GBM) are considered one of the 21st century’s most promising materials, as they are incredibly light, strong, thin and have remarkable electrical and thermal properties. As a result, over the past decade, their combination with a diverse range of synthetic polymers has been explored in tissue engineering (TE) and regenerative medicine (RM). In addition, a wide range of methods for fabricating polymer/GBM scaffolds have been reported. This review provides an overview of the most recent advances in polymer/GBM composite development and fabrication, focusing on methods such as electrospinning and additive manufacturing (AM). As a future outlook, this work stresses the need for more in vivo studies to validate polymer/GBM composite scaffolds for TE applications, and gives insight on their fabrication by state-of-the-art processing technologies.

Biomimetic Approaches for the Design and Fabrication of Bone-to-Soft Tissue Interfaces

Bone-to-soft tissue interfaces are responsible for transferring loads between tissues with significantly dissimilar material properties. The examples of connective soft tissues are ligaments, tendons, and cartilages. Such natural tissue interfaces have unique microstructural properties and characteristics which avoid the abrupt transitions between two tissues and prevent formation of stress concentration at their connections. Here, we review some of the important characteristics of these natural interfaces. The native bone-to-soft tissue interfaces consist of several hierarchical levels which are formed in a highly specialized anisotropic fashion and are composed of different types of heterogeneously distributed cells. The characteristics of a natural interface can rely on two main design principles, namely by changing the local microarchitectural features (e.g., complex cell arrangements, and introducing interlocking mechanisms at the interfaces through various geometrical designs) and changing the local chemical compositions (e.g., a smooth and gradual transition in the level of mineralization). Implementing such design principles appears to be a promising approach that can be used in the design, reconstruction, and regeneration of engineered biomimetic tissue interfaces. Furthermore, prominent fabrication techniques such as additive manufacturing (AM) including 3D printing and electrospinning can be used to ease these implementation processes. Biomimetic interfaces have several biological applications, for example, to create synthetic scaffolds for osteochondral tissue repair.

Tension Stimulation of Tenocytes in Aligned Hyaluronic Acid/Platelet-Rich Plasma-Polycaprolactone Core-Sheath Nanofiber Membrane Scaffold for Tendon Tissue Engineering

To recreate the in vivo niche for tendon tissue engineering in vitro, the characteristics of tendon tissue underlines the use of biochemical and biophysical cues during tenocyte culture. Herein, we prepare core-sheath nanofibers with polycaprolactone (PCL) sheath for mechanical support and hyaluronic acid (HA)/platelet-rich plasma (PRP) core for growth factor delivery. Three types of core-sheath nanofiber membrane scaffolds (CSNMS), consisting of random HA-PCL nanofibers (Random), random HA/PRP-PCL nanofibers (Random+) or aligned HA/PRP-PCL (Align⁺) nanofibers, were used to study response of rabbit tenocytes to biochemical (PRP) and biophysical (fiber alignment) stimulation. The core-sheath structures as well as other pertinent properties of CSNMS have been characterized, with Align⁺ showing the best mechanical properties. The unidirectional growth of tenocytes, as induced by aligned fiber topography, was confirmed from cell morphology and cytoskeleton expression. The combined effects of PRP and fiber alignment in Align⁺ CSNMS lead to enhanced cell proliferation rates, as well as upregulated gene expression and marker protein synthesis. Another biophysical cue on tenocytes was introduced by dynamic culture of tenocyte-seeded Align⁺ in a bioreactor with cyclic tension stimulation. Augmented by this biophysical beacon from mechanical loading, dynamic cell culture could shorten the time for tendon maturation in vitro, with improved cell proliferation rates and tenogenic phenotype maintenance, compared to static culture. Therefore, we successfully demonstrate how combined use of biochemical/topographical cues as well as mechanical stimulation could ameliorate cellular response of tenocytes in CSNMS, which can provide a functional in vitro environmental niche for tendon tissue engineering.

State-of-art review on preparation, surface functionalization and biomedical applications of cellulose nanocrystals-based materials

Cellulose nanocrystals (CNCs) are a class of sustainable nanomaterials that are obtained from plants and microorganisms. These naturally derived nanomaterials are of abundant hydroxyl groups, well biocompatibility, low cost and biodegradable potential, making them suitable and promising candidates for various applications, especially in biomedical fields. In this review, the recent advances and development on the preparation, surface functionalization and biomedical applications of CNCs-based materials have been summarized and outlined. The main context of this paper could be divided into the following three parts. In the first part, the preparation strategies based on physical, chemical, enzymatic and combination techniques for preparation of CNCs have been summarized. The surface functionalization methods for synthesis CNCs-based materials with designed properties and functions were outlined in the following section. Finally, the current state about applications of CNCs-based materials for tissue engineering, medical hydrogels, biosensors, fluorescent imaging and intracellular delivery of biological agents have been highlighted. Moreover, current issues and future directions about the above aspects have also pointed out and discussed. We believe this review will attract great research attention of scientists from materials, chemistry, biomedicine and other disciplines. It will also provide some important insights on the future development of CNCs-based materials especially in biomedical fields.

Recent Progress on Cellulose-Based Ionic Compounds for Biomaterials

Glycans play important roles in all major kingdoms of organisms, such as archea, bacteria, fungi, plants, and animals. Cellulose, the most abundant polysaccharide on the Earth, plays a predominant role for mechanical stability in plants, and finds a plethora of applications by humans. Beyond traditional use, biomedical application of cellulose becomes feasible with advances of soluble cellulose derivatives with diverse functional moieties along the backbone and modified nanocellulose with versatile functional groups on the surface due to the native features of cellulose as both cellulose chains and supramolecular ordered domains as extractable nanocellulose. With the focus on ionic cellulose-based compounds involving both these groups primarily for biomedical applications, a brief introduction about glycoscience and especially native biologically active glycosaminoglycans with specific biomedical application areas on humans is given, which inspires further development of bioactive compounds from glycans. Then, both polymeric cellulose derivatives and nanocellulose-based compounds synthesized as versatile biomaterials for a large variety of biomedical applications, such as for wound dressings, controlled release, encapsulation of cells and enzymes, and tissue engineering, are separately described, regarding the diverse routes of synthesis and the established and suggested applications for these highly interesting materials.

Multifaceted Design and Emerging Applications of Tissue Adhesives

Tissue adhesives can form appreciable adhesion with tissues and have found clinical use in a variety of medical settings such as wound closure, surgical sealants, regenerative medicine, and device attachment. The advantages of tissue adhesives include ease of implementation, rapid application, mitigation of tissue damage, and compatibility with minimally invasive procedures. The field of tissue adhesives is rapidly evolving, leading to tissue adhesives with superior mechanical properties and advanced functionality. Such adhesives enable new applications ranging from mobile health to cancer treatment. To provide guidelines for the rational design of tissue adhesives, here, existing strategies for tissue adhesives are synthesized into a multifaceted design, which comprises three design elements: the tissue, the adhesive surface, and the adhesive matrix. The mechanical, chemical, and biological considerations associated with each design element are reviewed. Throughout the report, the limitations of existing tissue adhesives and immediate opportunities for improvement are discussed. The recent progress of tissue adhesives in topical and implantable applications is highlighted, and then future directions toward next-generation tissue adhesives are outlined. The development of tissue adhesives will fuse disciplines and make broad impacts in engineering and medicine.

Tuning the Structure of Nylon 6,6 Electrospun Bundles to Mimic the Mechanical Performance of Tendon Fascicles

Tendon and ligament injuries are triggered by mechanical loading, but the specific mechanisms are not yet clearly identified. It is well established however, that the inflection and transition points in tendon stress-strain curves represent thresholds that may signal the onset of irreversible fibrillar sliding. This phenomenon often results in a progressive macroscopic failure of these tissues. With the aim to simulate and replace tendons, electrospinning has been demonstrated to be a suitable technology to produce nanofibers similar to the collagen fibrils in a mat form. These nanofibrous mats can be easily assembled in higher hierarchical levels to reproduce the whole tissue structure. Despite the fact that several groups have developed electrospun tendon-inspired structures, an investigation of the inflection and transition point mechanics is missing. Comparing their behavior with that of the natural counterpart is important to adequately replicate their behavior at physiological strain levels. To fill this gap, in this work fascicle-inspired electrospun nylon 6,6 bundles were produced with different collector peripheral speeds (i.e., 19.7 m s^–1; 13.7 m s^–1; 7.9 m s^–1), obtaining different patterns of nanofibers alignment. The scanning electron microcopy revealed a fibril-inspired structure of the nanofibers with an orientation at the higher speed similar to those in tendons and ligaments (T/L). A tensile mechanical characterization was carried out showing an elastic-brittle biomimetic behavior for the higher speed bundles with a progressively more ductile behavior at slower speeds. Moreover, for each sample category the transition and the inflection points were defined to study how these points can shift with the nanofiber arrangement and to compare their values with those of tendons. The results of this study will be of extreme interest for the material scientists working in the field, to model and improve the design of their electrospun structures and scaffolds and enable building a new generation of artificial tendons and ligaments.

Fibrous Systems as Potential Solutions for Tendon and Ligament Repair, Healing, and Regeneration

Tendon and ligament injuries caused by trauma and degenerative diseases are frequent and affect diverse groups of the population. Such injuries reduce musculoskeletal performance, limit joint mobility, and lower people's comfort. Currently, various treatment strategies and surgical procedures are used to heal, repair, and restore the native tissue function. However, these strategies are inadequate and, in some cases, fail to re-establish the lost functionality. Tissue engineering and regenerative medicine approaches aim to overcome these disadvantages by stimulating the regeneration and formation of neotissues. Design and fabrication of artificial scaffolds with tailored mechanical properties are crucial for restoring the mechanical function of tendons. In this review, the tendon and ligament structure, their physiology, and performance are presented. On the other hand, the requirements are focused for the development of an effective reconstruction device. The most common fiber-based scaffolding systems are also described for tendon and ligament tissue regeneration like strand fibers, woven, knitted, braided, and braid-twisted fibrous structures, as well as electrospun and wet-spun constructs, discussing critically the advantages and limitations of their utilization. Finally, the potential of multilayered systems as the most effective candidates for tendon and ligaments tissue engineering is pointed out.

Rheological properties of cellulose nanofiber hydrogel for high-fidelity 3D printing

Optimization of the rheological properties of the matrix is ​​critical for high-fidelity matrix-assisted 3D printing (MAP), which enables the free-form fabrication of fluidic soft materials. This report describes the generic criteria observable in the printing process of cellulose nanofiber (CNF) hydrogels: the sharpness of an angled line, the cross-sectional ratio of a feature, the surface roughness of features, and the completeness of multi-line writing. The concentration and physical properties of the CNF affects the printing fidelity by changing the values of the four criteria, which are closely related to the rheological properties of the matrix. The printing fidelity can be enhanced by the optimal combination of the inks and the CNF matrix. Hydrophilic and hydrophobic inks are printed in the CNF matrix demonstrating as a universal matrix for free-form fabrication with liquid inks.

Magnetic Nanocomposite Hydrogels for Tissue Engineering: Design Concepts and Remote Actuation Strategies to Control Cell Fate

Most tissues of the human body are characterized by highly anisotropic physical properties and biological organization. Hydrogels have been proposed as scaffolding materials to construct artificial tissues due to their water-rich composition, biocompatibility, and tunable properties. However, unmodified hydrogels are typically composed of randomly oriented polymer networks, resulting in homogeneous structures with isotropic properties different from those observed in biological systems. Magnetic materials have been proposed as potential agents to provide hydrogels with the anisotropy required for their use on tissue engineering. Moreover, the intrinsic properties of magnetic nanoparticles enable their use as magnetomechanic remote actuators to control the behavior of the cells encapsulated within the hydrogels under the application of external magnetic fields. In this review, we combine a detailed summary of the main strategies to prepare magnetic nanoparticles showing controlled properties with an analysis of the different approaches available to their incorporation into hydrogels. The application of magnetically responsive nanocomposite hydrogels in the engineering of different tissues is also reviewed.

Topographical and Biomechanical Guidance of Electrospun Fibers for Biomedical Applications

Electrospinning is gaining increasing interest in the biomedical field as an eco-friendly and economic technique for production of random and oriented polymeric fibers. The aim of this review was to give an overview of electrospinning potentialities in the production of fibers for biomedical applications with a focus on the possibility to combine biomechanical and topographical stimuli. In fact, selection of the polymer and the eventual surface modification of the fibers allow selection of the proper chemical/biological signal to be administered to the cells. Moreover, a proper design of fiber orientation, dimension, and topography can give the opportunity to drive cell growth also from a spatial standpoint. At this purpose, the review contains a first introduction on potentialities of electrospinning for the obtainment of random and oriented fibers both with synthetic and natural polymers. The biological phenomena which can be guided and promoted by fibers composition and topography are in depth investigated and discussed in the second section of the paper. Finally, the recent strategies developed in the scientific community for the realization of electrospun fibers and for their surface modification for biomedical application are presented and discussed in the last section.

Cell-Cell Adhesion-Driven Contact Guidance and Its Effect on Human Mesenchymal Stem Cell Differentiation

Contact guidance has been extensively explored using patterned adhesion functionalities that predominantly mimic cell-matrix interactions. Whether contact guidance can also be driven by other types of interactions, such as cell-cell adhesion, still remains a question. Herein, this query is addressed by engineering a set of microstrip patterns of (i) cell-cell adhesion ligands and (ii) segregated cell-cell and cell-matrix ligands as a simple yet versatile set of platforms for the guidance of spreading, adhesion, and differentiation of mesenchymal stem cells. It was unprecedently found that micropatterns of cell-cell adhesion ligands can induce contact guidance. Surprisingly, it was found that patterns of alternating cell-matrix and cell-cell strips also induce contact guidance despite providing a spatial continuum for cell adhesion. This guidance is believed to be due to the difference between the potencies of the two adhesions. Furthermore, patterns that combine the two segregated adhesion functionalities were shown to induce more human mesenchymal stem cell osteogenic differentiation than monofunctional patterns. This work provides new insight into the functional crosstalk between cell-cell and cell-matrix adhesions and, overall, further highlights the ubiquitous impact of the biochemical anisotropy of the extracellular environment on cell function.

Biodegradable polymer nanocomposites for ligament/tendon tissue engineering

Ligaments and tendons are fibrous tissues with poor vascularity and limited regeneration capacity. Currently, a ligament/tendon injury often require a surgical procedure using auto- or allografts that present some limitations. These inadequacies combined with the significant economic and health impact have prompted the development of tissue engineering approaches. Several natural and synthetic biodegradable polymers as well as composites, blends and hybrids based on such materials have been used to produce tendon and ligament scaffolds. Given the complex structure of native tissues, the production of fiber-based scaffolds has been the preferred option for tendon/ligament tissue engineering. Electrospinning and several textile methods such as twisting, braiding and knitting have been used to produce these scaffolds. This review focuses on the developments achieved in the preparation of tendon/ligament scaffolds based on different biodegradable polymers. Several examples are overviewed and their processing methodologies, as well as their biological and mechanical performances, are discussed.

Applications of chitin and chitosan nanofibers in bone regenerative engineering

Promoting bone regeneration and repairing defects are urgent and critical challenges in orthopedic clinical practice. Research on bone substitute biomaterials is essential for improving the treatment strategies for bone regeneration. Chitin and its derivative, chitosan, are among the most abundant natural biomaterials and widely found in the shells of crustaceans. Chitin and chitosan are non-toxic, antibacterial, biocompatible, degradable, and have attracted significant attention in bone substitute biomaterials. Chitin/chitosan nanofibers and nanostructured scaffolds have large surface area to volume ratios and high porosities. These scaffolds can be fabricated by electrospinning, thermally induced phase separation and self-assembly, and are widely used in biomedical applications such as biological scaffolds, drug delivery, bacterial inhibition, and wound dressing. Recently, some chitin/chitosan-based nanofibrous scaffolds have been found structurally similar to bone's extracellular matrix and can assist in bone regeneration. This review outlines the biomedical applications and biological properties of chitin/chitosan-based nanofibrous scaffolds in bone tissue engineering.

Magneto-mechanical actuation of magnetic responsive fibrous scaffolds boosts tenogenesis of human adipose stem cells

Tendons are highly specialized load-bearing tissues with very limited healing capacity. Given their mechanosensitive nature, the combination of tendon mimetic scaffolds with remote mechanical actuation could synergistically contribute to the fabrication of improved tissue engineered alternatives for the functional regeneration of tendons. Here, hybrids of cellulose nanocrystals decorated with magnetic nanoparticles were produced to simultaneously reinforce and confer magnetic responsiveness to tendon mimetic hierarchical fibrous scaffolds, resulting in a system that enables remote stimulation of cells in vitro and, potentially, in vivo after construct transplantation. The biological performance and functionality of these scaffolds were evaluated using human adipose stem cells (hASCs) cultured under or in the absence of magnetic actuation. It was demonstrated that magneto-mechanical stimulation of hASCs promotes higher degrees of cell cytoskeleton anisotropic organization and steers the mechanosensitive YAP/TAZ signaling pathway. As feedback, stimulated cells show increased expression of tendon-related markers, as well as a pro-healing profile in genes related to their inflammatory secretome. Overall, these results support the use of the proposed magnetic responsive fibrous scaffolds as remote biointegrated actuators that can synergistically boost hASC tenogenesis through mechanosensing mechanisms and may modulate their pro-healing paracrine signaling, thus collectively contributing to the improvement of the regenerative potential of engineered tendon grafts.

Electrospun acid-neutralizing fibers for the amelioration of inflammatory response

Biodegradable aliphatic polyesters, especially polylactide (PLA), polyglycolide (PGA), and their copolymer poly(lactide-co-glycolide) (PLGA), are the most representative and widely used synthetic polymers in the field of tissue engineering and regenerative medicine. However, these polyesters often give rise to aseptic inflammation because of their acidic degradation products after implantation. Here, unidirectional shell-core structured fibers of chitosan/poly(lactide-co-glycolide) (i.e., CTS/PLGA) with acid-neutralizing capability were developed for addressing the noted issue by coating the PLGA fiber surfaces with a layer of the alkaline chitosan by coaxial electrospinning. Our results showed that during a period of 8-week degradation, the shell-layer of chitosan with its unique alkaline nature for acid-neutralization obviously hindered the pH decrease as a result of the degradation of PLGA-core. In a mocked acidic environment testing of the human dermal fibroblasts, chitosan-enabled acidity neutralization could significantly reduce in vitro the secretion of inflammatory factors and downregulate the expression of related inflammatory genes. Thereafter, biocompatibility assessment in vitro showed that the CTS/PLGA fibers had poorer cell adhesion capacity than the PLGA fibers but were cytocompatible and promoted cell migration and secretion of collagen. Moreover, subcutaneous embedding for two and four weeks in vivo revealed that the CTS/PLGA fibers significantly reduced the recruitment of inflammatory cells and the formation of foreign body giant cells (FBGCs). This study thereby demonstrated the evident acid-neutralizing effect of the chitosan-coating layer on alleviating the inflammatory responses caused by the acidic degradation products of the PLGA-core. Our highly aligned CTS/PLGA fibers, as a kind of quasi "pH-neutral fibers" with the acid-neutralizing capability, could be potentially applied for engineering those architecturally anisotropic tissues (e.g., tendon/ligament) toward improved efficacy of regeneration. STATEMENT OF SIGNIFICANCE: It is well known that acidic degradation products from representative aliphatic polyesters (e.g., PLA, PGA, and PLGA) give rise to the problem of aseptic inflammation. Various alkaline components acting as neutralizing agents have been used to address the noted issue. However, rather less attention has been paid to engineer these polyesters into a fibrous form with acid-neutralizing functionality. The present study proposes the concept of "pH-neutral fibers" and develops shell-core structured unidirectional fibers of chitosan/poly(lactide-co-glycolide) with acid-neutralizing capability for ameliorating inflammatory responses caused by the acidic degradation products of PLGA. It provides a comprehensive study encompassing fiber characterization and in vitro and in vivo evaluation, which would pave the way for developing sophisticated pH-neutral fibers for functional tissue regeneration.

Tropoelastin-Coated Tendon Biomimetic Scaffolds Promote Stem Cell Tenogenic Commitment and Deposition of Elastin-Rich Matrix

Tendon tissue engineering strategies that recreate the biophysical and biochemical native microenvironment have a greater potential to achieve regeneration. Here, we developed tendon biomimetic scaffolds using mechanically competent yarns of poly-ε-caprolactone, chitosan, and cellulose nanocrystals to recreate the inherent tendon hierarchy from a nano-to-macro scale. These were then coated with tropoelastin (TROPO) through polydopamine (PDA) linking, to mimic the native extracellular matrix (ECM) composition and elasticity. Both PDA and TROPO coatings decreased surface stiffness without masking the underlying substrate. We found that human adipose-derived stem cells (hASCs) seeded onto these TROPO biomimetic scaffolds more rapidly acquired their spindle-shape morphology and high aspect ratio characteristic of tenocytes. Immunocytochemistry shows that the PDA and TROPO-coated surfaces boosted differentiation of hASCs toward the tenogenic lineage, with sustained expression of the tendon-related markers scleraxis and tenomodulin up to 21 days of culture. Furthermore, these surfaces enabled the deposition of a tendon-like ECM, supported by the expression of collagens type I and III, tenascin, and decorin. Gene expression analysis revealed a downregulation of osteogenic and fibrosis markers in the presence of TROPO when compared with the control groups, suggesting proper ECM deposition. Remarkably, differentiated cells exposed to TROPO acquired an elastogenic profile due to the evident elastin synthesis and deposition, contributing to the formation of a more mimetic matrix in comparison with the PDA-coated and uncoated conditions. In summary, our biomimetic substrates combining biophysical and biological cues modulate stem cell behavior potentiating their long-term tenogenic commitment and the production of an elastin-rich ECM.

Skeletal myotube formation enhanced through fibrillated collagen nanofibers coated on a 3D-printed polycaprolactone surface

This work focused on considering the cellular responses of the growth and differentiation of myoblasts, C2C12, on fibrillated collagen-coated poly(ε-caprolactone) (PCL) surfaces. Through a fibrillation processing window using NaCl and collagen weight fractions, collagen fibril coating density can be controlled. Three different collagen-fibril densities coated on PCL strut were used to investigate the effects of the collagen fibril on the myoblast activities. After physical and cellular analyses of the scaffolds, such as surface morphology, fibronectin absorption, wettability, and mechanical properties, the rate of cell growth and the proficiency of the myoblasts to develop skeletal myotubes were evaluated. Based on the results, although the coated collagen nanofibers were randomly distributed, the fibrillated collagen layer with the appropriate density on the PCL surface promoted a greater myotube formation than that of the control, which had no fibrillated collagen. In particular, relatively higher densities of collagen fibril showed significantly greater myotube formation than those of the control (not-fibrillated collagen-coated on the PCL surface) and lower density of collagen fibril.

Injectable and Magnetic Responsive Hydrogels with Bioinspired Ordered Structures

Injectable hydrogels are particularly interesting for applications in minimally invasive tissue engineering and regenerative medicine strategies. However, the typical isotropic microstructure of these biomaterials limits their potential for the regeneration of ordered tissues. In the present work, we decorated rod-shaped cellulose nanocrystals with magnetic nanoparticles and coated these with polydopamine and polyethylene glycol polymer brushes to obtain chemical and colloidal stable nanoparticles. Then, these nanoparticles (0.1-0.5 wt %) were incorporated within gelatin hydrogels, creating injectable and magnetically responsive materials with potential for various biomedical applications. Nanoparticle alignment within the hydrogel matrix was achieved under exposure to uniform low magnetic fields (108 mT), resulting in biomaterials with directional microstructure and anisotropic mechanical properties. The biological performance of these nanocomposite hydrogels was studied using adipose tissue derived human stem cells. Cells encapsulated in the nanocomposite hydrogels showed high rates of viability demonstrating that the nanocomposite biomaterials are not cytotoxic. Remarkably, the microstructural patterns stemming from nanoparticle alignment induced the directional growth of seeded and, to a lower extent, encapsulated cells in the hydrogels, suggesting that this injectable system might find application in both cellular and acellular strategies targeting the regeneration of anisotropic tissues.

Enhanced osteogenesis of mesenchymal stem cells on electrospun cellulose nanocrystals/poly(ε-caprolactone) nanofibers on graphene oxide substrates

Cellulose nanocrystals (CNCs) have received a great amount of attention to the production of micro/nano-platforms for tissue engineering applications. CNCs were extracted from rice husk biomass and characterized by different spectroscopic techniques. The biocompatibility of the extracted CNCs was revealed by the WST-1 assay technique in the presence of human mesenchymal stem cells (hMSCs) after different time intervals. An improvement in the mechanical properties was observed in the fabricated scaffolds (PCL/CNC) compared to PCL scaffolds. Graphene oxide (GO)-coated (PCL/CNC) electrospun scaffolds (GPC) were prepared by the deposition of PCL/CNC composite nanofibers on the surface of GO for tissue engineering. Notably, better cell proliferation and differentiation were observed in the presence of the fabricated scaffolds. This enhancement of the properties of the fabricated scaffolds was due to the presence of conductive GO moieties which facilitated the cellular response. Therefore, the fabricated materials have the potential to be used as a biomaterial for enhanced cell proliferation and osteogenic differentiation.

Cellulose nanocrystals (CNCs) have received a great amount of attention to the production of micro/nano-platforms for tissue engineering applications.

Smart supramolecular gels of enolizable amphiphilic glycosylfuran

In this report, bio-based amphiphilic glycosylfurans were synthesized using a biocatalyst. For the first time, we are reporting on hydrogelation via in situ molecular tuning of amphiphilic glycosylfurans followed by a self-sorting mechanism.

Chitosan-g-oligo/polylactide copolymer non-woven fibrous mats containing protein: from solid-state synthesis to electrospinning

Amphiphilic chitosan-g-oligo/polylactide graft-copolymers were synthesized through solid-state reactive co-extrusion and used for fabrication of fibrous non-woven mats via the electrospinning technique using chloroform as a solvent.