Biodegradable Nanoparticles Enhanced Adhesiveness of Mussel-Like Hydrogels at Tissue Interface

An Overview on the Adhesion Mechanisms of Typical Aquatic Organisms and the Applications of Biomimetic Adhesives in Aquatic Environments

Water molecules pose a significant obstacle to conventional adhesive materials. Nevertheless, some marine organisms can secrete bioadhesives with remarkable adhesion properties. For instance, mussels resist sea waves using byssal threads, sandcastle worms secrete sandcastle glue to construct shelters, and barnacles adhere to various surfaces using their barnacle cement. This work initially elucidates the process of underwater adhesion and the microstructure of bioadhesives in these three exemplary marine organisms. The formation of bioadhesive microstructures is intimately related to the aquatic environment. Subsequently, the adhesion mechanisms employed by mussel byssal threads, sandcastle glue, and barnacle cement are demonstrated at the molecular level. The comprehension of adhesion mechanisms has promoted various biomimetic adhesive systems: DOPA-based biomimetic adhesives inspired by the chemical composition of mussel byssal proteins; polyelectrolyte hydrogels enlightened by sandcastle glue and phase transitions; and novel biomimetic adhesives derived from the multiple interactions and nanofiber-like structures within barnacle cement. Underwater biomimetic adhesion continues to encounter multifaceted challenges despite notable advancements. Hence, this work examines the current challenges confronting underwater biomimetic adhesion in the last part, which provides novel perspectives and directions for future research.

Non-Covalent Cross-Linking Hydrogel: A New Method for Visceral Hemostasis

Excessive blood loss could lead to pathological conditions such as tissue necrosis, organ failure, and death. The limitations of recently developed hemostatic approaches, such as their low mechanical strength, inadequate wet tissue adhesion, and weak hemostatic activity, pose challenges for their application in controlling visceral bleeding. In this study, a novel hydrogel (CT) made of collagen and tannic acid (TA) was proposed. By altering the proportions between the two materials, the mechanical properties, adhesion, and coagulation ability were evaluated. Compared to commercial hydrogels, this hydrogel has shown reduced blood loss and shorter hemostatic time in rat hepatic and cardiac bleeding models. This was explained by the hydrogel's natural hemostatic properties and the significant benefits of wound closure in a moist environment. Better biodegradability was achieved through the non-covalent connection between tannic acid and collagen, allowing for hemostasis without hindering subsequent tissue repair. Therefore, this hydrogel is a new method for visceral hemostasis that offers significant advantages in treating acute wounds and controlling major bleeding. And the production method is simple and efficient, which facilitates its translation to clinical applications.

Progress of polysaccharide-based tissue adhesives

Recently, polymer-based tissue adhesives (TAs) have gained the attention of scientists and industries as alternatives to sutures for sealing and closing wounds or incisions because of their ease of use, low cost, minimal tissue damage, and short application time. However, poor mechanical properties and weak adhesion strength limit the application of TAs, although numerous studies have attempted to develop new TAs with enhanced performance. Therefore, next-generation TAs with improved multifunctional properties are required. In this review, we address the requirements of polymeric TAs, adhesive characteristics, adhesion strength assessment methods, adhesion mechanisms, applications, advantages and disadvantages, and commercial products of polysaccharide (PS)-based TAs, including chitosan (CS), alginate (AL), dextran (DE), and hyaluronic acid (HA). Additionally, future perspectives are discussed.

First-Aid Hydrogel Wound Dressing with Reliable Hemostatic and Antibacterial Capability for Traumatic Injuries

First-aid for severe traumatic injuries in the battlefield or pre-hospital environment, especially for skin defects or visceral rupture, remains a substantial medical challenge even in the context of the rapidly evolving modern medical technology. Hydrogel-based biomaterials are highly anticipated for excellent biocompatibility and bio-functional designability. Yet, inadequate mechanical and bio-adhesion properties limit their clinical application. To address these challenges, a kind of multifunctional hydrogel wound dressing is developed with the collective multi-crosslinking advantages of dynamic covalent bonds, metal-catechol chelation, and hydrogen bonds. The mussel-inspired design and zinc oxide-enhanced cohesion strategy collaboratively reinforce the hydrogel's bio-adhesion in bloody or humoral environments. The pH-sensitive coordinate Zn2+ -catechol bond and dynamic Schiff base with reversible breakage and reformation equip the hydrogel dressing with excellent self-healing and on-demand removal properties. In vivo evaluation in a rat ventricular perforation model and Methicillin-resistant Staphylococcus aureus (MRSA)-infected full-thickness skin defect model reveal excellent hemostatic, antibacterial and pro-healing effectiveness of the hydrogel dressing, demonstrating its great potential in dealing with severe bleeding and infected full-thickness skin wounds.

Photocatalytic and Photothermal Antimicrobial Mussel-Inspired Nanocomposites for Biomedical Applications

Bacterial infection has traditionally been treated with antibiotics, but their overuse is leading to the development of antibiotic resistance. This may be mitigated by alternative approaches to prevent or treat bacterial infections without utilization of antibiotics. Among the alternatives is the use of photo-responsive antimicrobial nanoparticles and/or nanocomposites, which present unique properties activated by light. In this study, we explored the combined use of titanium oxide and polydopamine to create nanoparticles with photocatalytic and photothermal antibacterial properties triggered by visible or near-infrared light. Furthermore, as a proof-of-concept, these photo-responsive nanoparticles were combined with mussel-inspired catechol-modified hyaluronic acid hydrogels to form novel light-driven antibacterial nanocomposites. The materials were challenged with models of Gram-negative and Gram-positive bacteria. For visible light, the average percentage killed (PK) was 94.6 for E. coli and 92.3 for S. aureus. For near-infrared light, PK for E. coli reported 52.8 and 99.2 for S. aureus. These results confirm the exciting potential of these nanocomposites to prevent the development of antibiotic resistance and also to open the door for further studies to optimize their composition in order to increase their bactericidal efficacy for biomedical applications.

Functional liposome loaded curcumin for the treatment of Streptococcus mutans biofilm

Introduction: Plaque biofilms, mainly formed by Streptococcus mutans (S. mutans), play an important role in the occurrence and development of dental caries. Antibiotic treatment is the traditional way to control plaque. However, problems such as poor drug penetration and antibiotic resistance have encouraged the search for alternative strategies. In this paper, we hope to avoid antibiotic resistance through the antibacterial effect of curcumin, a natural plant extract with photodynamic effects, on S. mutans. However, the clinical application of curcumin is limited due to its low water solubility, poor stability, high metabolic rate, fast clearance rate, and limited bioavailability. In recent years, liposomes have become a widely used drug carrier due to their numerous advantages, such as high drug loading efficiency, high stability in the biological environment, controlled release, biocompatibility, non-toxic, and biodegradability. So, we constructed a curcumin-loaded liposome (Cur@LP) to avoid the defect of curcumin.

Methods: Cur@LP functioned with NHS can adhere to the surface of the S. mutans biofilm by condensation reaction. Liposome (LP) and Cur@LP was characterized by transmission electron microscopy (TEM) and dynamic light scattering (DLS). The cytotoxicity of Cur@LP was evaluated by CCK-8 assay and LDH assay. The adhesion of Cur@LP to S. mutans biofilm was observed by confocal laser scanning microscope (CLSM). The antibiofilm efficiency of Cur@LP were evaluated by crystal violet staining, CLSM, and scanning electron microscope (SEM).

Results: The mean diameter of LP and Cur@LP were 206.67 ± 8.38 nm and 312 ± 18.78 nm respectively. The ζ-potential of LP and Cur@LP were ∼−19.3 mV and ∼−20.8 mV respectively. The encapsulation efficiency of Cur@LP was (42.61 ± 2.19) %, and curcumin was rapidly released up to ±21% at 2 h. Cur@LP has negligible cytotoxicity, and can effectively adhered to the S. mutans biofilm and inhibited its growth.

Discussion: Curcumin has been widely studied in many fields such as cancer, which can be attributed to its antioxidant and anti-inflammatory effects. At present, there are few studies on the delivery of curcumin to S. mutans biofilm. In this study, we verified the adhesion and antibiofilm of Cur@LP to S. mutans biofilm. This biofilm removal strategy has the potential to be translated into the clinic.

Tissue-adhesive hydrogel for multimodal drug release to immune cells in skin

Both innate and adaptive immune systems play a crucial role in the pathology of skin diseases. To control these cells, there is a need for transdermal drug delivery systems that can target multiple cell populations at independently tunable rates. Herein, we describe a tissue-adhesive hydrogel system that contains particles capable of regulating the release of small molecule drugs at defined rates. Resiquimod (a macrophage-targeting drug) and palbociclib (a T cell-targeting drug) are encapsulated within two types of silicone particles embedded within the hydrogel. We demonstrate that drug release is mediated by the crosslink density of the particles, which is decoupled from the bulk properties of the hydrogel. We show that this system can be used to sustainably polarize macrophages toward an anti-tumor phenotype in vitro and ex vivo, and that the hydrogels can remain attached to skin explants for several days without generating toxicity. The hydrogel system is compatible with standard dermatological procedures and allows transdermal passage of drugs. The multimodal, tunable nature of this system has implications in treating a variety of skin disorders, managing infections, and delivering vaccines. STATEMENT OF SIGNIFICANCE: We describe a tissue-adhesive hydrogel that can regulate the release of drugs in a manner that is decoupled from its bulk properties. The mechanism of drug release is mediated by embedded microparticles with well-defined crosslink densities. The significance of this system is that, by encapsulating different drugs into the particles, it is possible to achieve multimodal drug release. We demonstrate this capability by releasing two immunomodulatory drugs at disparate rates. A drug that targets innate immune cells is released quickly, and a drug that targets adaptive immune cells is released slowly. This programmable system offers a direct means by which cellular responses can be enhanced through independent targeting for a variety of transdermal applications, including cancer treatment and vaccine delivery.

Adhesive hydrogel wrap loaded with Netrin-1-modified adipose-derived stem cells: An effective approach against periarterial inflammation after endovascular intervention

Endovascular interventions, such as balloon dilation and stent implantation, are currently recommended as the primary treatment for patients with peripheral artery disease (PAD), greatly improving patient prognosis. However, the consequent lumen restenosis that occurs after endovascular interventions has become an important clinical problem. Inflammation has been proven to be crucial to postoperative restenosis. In previous studies we have identified that Netrin-1-modified adipose-derived stem cells (N-ADSCs) transplantation is an effective anti-inflammatory strategy to repair vascular damage. Nevertheless, it remained to be explored how one could constantly deliver N-ADSCs onto damaged arteries. Therefore, we developed an adhesive double network (DN) hydrogel wrap loaded with N-ADSCs for sustained perivascular delivery. Inspired by the adhesion mechanism of mussels, we developed an adhesive and tough polyacrylamide/calcium-alginate/reduced graphene oxide/polydopamine (PAM/CA/rGO/PDA) hydrogel. Dopamine was attached to graphene sheets and limitedly oxidized to generate free catechol groups. The hydrogel could wrap damaged arteries and induce anti-inflammatory effects through N-ADSCs. In vitro experiments demonstrated that N-ADSCs significantly promoted the M2 polarization of macrophages to anti-inflammatory phenotypes and reduced the expression of inflammatory factors. In vivo experiments in a rat carotid artery guidewire injury model showed that the adhesive hydrogel wrap loaded with N-ADSCs could significantly reduce arterial inflammation, inhibit intimal hyperplasia and improve re-endothelialization. Altogether, this newly developed N-ADSCs-loaded hydrogel wrap provides an effective slow-releasing system, which may be a promising way to prevent and treat restenosis after endovascular interventions.

Biodegradable Polymer Composites for Electrophysiological Signal Sensing

Electrophysiological signals are collected to characterize human health and applied in various fields, such as medicine, engineering, and pharmaceuticals. Studies of electrophysiological signals have focused on accurate signal acquisition, real-time monitoring, and signal interpretation. Furthermore, the development of electronic devices consisting of biodegradable and biocompatible materials has been attracting attention over the last decade. In this regard, this review presents a timely overview of electrophysiological signals collected with biodegradable polymer electrodes. Candidate polymers that can constitute biodegradable polymer electrodes are systemically classified by their essential properties for collecting electrophysiological signals. Moreover, electrophysiological signals, such as electrocardiograms, electromyograms, and electroencephalograms subdivided with human organs, are discussed. In addition, the evaluation of the biodegradability of various electrodes with an electrophysiology signal collection purpose is comprehensively revisited.

Gelation of highly entangled hydrophobic macromolecular fluid for ultrastrong underwater in situ fast tissue adhesion

Although strong underwater bioadhesion is important for many biomedical applications, designing adhesives to perform in the presence of body fluids proves to be a challenge. To address this, we propose an underwater and in situ applicable hydrophobic adhesive (UIHA) composed of polydimethylsiloxane, entangled macromolecular silicone fluid, and a reactive silane. The hydrophobic fluid displaced the boundary water, formed an in situ gel, bonded to tissues, and achieved exceptional underwater adhesion strength. Its underwater lap shear adhesion on porcine skin was significantly higher than that of cyanoacrylate and fibrin glues, demonstrating excellent water resistance. The burst pressure of UIHA on porcine skin was 10 times higher than that of fibrin glue. The cytocompatible UIHA successfully sealed ruptured arteries, skin, and lungs in rats, pigs, rabbits, and dogs. Together, the gelation of highly entangled hydrophobic macromolecular fluid provided a means to prepare underwater bioadhesives with strong bonding to tissues and excellent water resistance.

Fabricating Network-Link Acetamiprid-Loading Micelles Based on Dopamine-Functionalized Alginate and Alkyl Polyglucoside To Enhance Folia Deposition and Retention

The development of an eco-friendly nanopesticide formulation can alleviate the problems of low pesticide utilization and environmental pollution. However, the development of green nanopesticide carriers with ideal physical properties and specific bioavailability is still a challenging task at present. In this study, we propose a novel binary additive pesticide carrier system that is a functional polysaccharide-based polymer/surfactant (Alg-DA/APG) to improve the deposition and retention of pesticide droplets. The self-assembled micelle morphology of Alg-DA/APG and its effect on the apparent viscosity were investigated by transmission electron microscopy (TEM) and a Discovery HR-2 rotational rheometer. Surface tension was carried out to investigate the surface activity and critical micelle concentration (CMC) of Alg-DA/APG. The drop impacting experiments exhibited superior antisplash performance of Alg-DA/APG. Furthermore, a binary additive was used as the carrier material and loaded acetamiprid to prepare nanopesticide formulation Ace@Alg-DA/APG. The encapsulation efficiency (EE) and acetamiprid release behavior from Ace@Alg-DA/APG were also studied. Moreover, the dynamic contact angle (DCA) and retention experiment showed that the DCA and wetting radius at 600 s were, respectively, 6.8 ± 2.39° and 4.044 ± 0.0662 mm for the Ace@0.05 wt % Alg-DA/0.05 wt % APG on the banana foliage surface, and its retention rates on foliage surface were up to 74.80% after washing. The novel binary additive as a nanopesticide carrier has the potential to alleviate the problems of low pesticide utilization and environmental pollution in the future.

Polydopamine nanoparticles and hyaluronic acid hydrogels for mussel-inspired tissue adhesive nanocomposites

Bioadhesives are intended to facilitate the fast and efficient reconnection of tissues to restore their functionality after surgery or injury. The use of mussel-inspired hydrogel systems containing pendant catechol moieties is promising for tissue attachment under wet conditions. However, the adhesion strength is not yet ideal. One way to overcome these limitations is to add polymeric nanoparticles to create nanocomposites with improved adhesion characteristics. To further enhance adhesiveness, polydopamine nanoparticles with controlled size prepared using an optimized process, were combined with a mussel-inspired hyaluronic acid (HA) hydrogel to form a nanocomposite. The effects of sizes and concentrations of polydopamine nanoparticles on the adhesive profiles of mussel-inspired HA hydrogels were investigated. Results show that the inclusion of polydopamine nanoparticles in nanocomposites increased adhesion strength, as compared to the addition of poly (lactic-co-glycolic acid) (PLGA), and PLGA-(N-hydroxysuccinimide) (PLGA-NHS) nanoparticles. A nanocomposite with demonstrated cytocompatibility and an optimal lap shear strength (47 ± 3 kPa) was achieved by combining polydopamine nanoparticles of 200 nm (12.5% w/v) with a HA hydrogel (40% w/v). This nanocomposite adhesive shows its potential as a tissue glue for biomedical applications.

Emerging bioadhesives: from traditional bioactive and bioinert to a new biomimetic protein-based approach

Bioadhesives have reached significant milestones over the past two decades. Research has shown not only to produce adhesives capable of adhering to dry tissue but recently wet tissue as well. However, most bioadhesives developed have exhibited high adhesion strength yet lack other properties required for versatility in application, such as elasticity, biocompatibility and biodegradability. Adapting from limitations met from early bioadhesives and meeting the current demand allows novel bioadhesives to reach new milestones for the future. In this review, we overview the progression and variations of bioadhesives, current trends, characterisation techniques and conclude with future perspectives for bioadhesives for tissue engineering applications.

Liquid Copolymers as Biodegradable Surgical Sealant

Surgical sealants are widely used to prevent seepage of fluids and liquids, promote hemostasis, and close incisions. Despite the remarkable progress the field of biomaterials has undergone, the clinical uses of surgical sealants are limited because of their short persistence time in vivo, toxicity, and high production costs. Here, the development of two complementary neat (solvent-free) prepolymers, PEG₄ -PLGA-NHS and PEG₄ -NH₂ , that harden upon mixing to yield an elastic biodegradable sealant is presented. The mechanical and rheological properties and cross-linking rate can be controlled by varying the ratio between the two prepolymers. The tested sealants show a longer persistence time compared with fibrin glue, minimal cytotoxicity in vitro, and excellent biocompatibility in vivo. The neat, multiarmed approach demonstrated here improves the mechanical and biocompatibility properties and provides a promising tissue sealant solution for wound closure in future surgical procedures.

Enhancing Tissue Adhesion and Osteoblastic Differentiation of MC3T3-E1 Cells on Poly(aryl ether ketone) by Chemically Anchored Hydroxyapatite Nanocomposite Hydrogel Coating

Tissue adhesion to bone implant and osteoblastic differentiation are the key factors to achieve poly(aryl ether ketone) (PAEK) implant osseointegration. However, physical interaction of implant with tissue and hydroxyapatite coating suffers from slow implant tissue integration and lack of long-term stability. In this study, a novel poly(phthalazinone ether sulfone ketone) containing allyl groups (APPBAESK) is coated onto PPBESK sheet for reacting with the allyl groups of the hydrogel coating to enhance its stability. N-Succinimidyl (NHS)-ester activated group and nano-hydroxyapatite (nano-HA) are introduced into the hydrogel synthesized from gelatin methacrylate (GelMA) and acrylic acid to construct a nanocomposite hydrogel coating on PPBESK which is a promising PAEK implant material. The hydrophilicity of the PPBESK sheet is improved by the hydrogel coating. The chemical components of the nanocomposite hydrogel coating are confirmed by X-ray photoelectron spectroscope, Attenuated total reflection infrared, and X-ray powder diffraction. The tissue shear adhesion strength of the hydrogel coating toward pig skin is enhanced due to the synergism of NHS-ester activated group and nano-HA. The osteogenic differentiation of MC3T3-E1 preosteoblasts is promoted by nano-HA in nanocomposite hydrogel coating. Therefore, the bifunctional nanocomposite hydrogel coating provides a great application prospect in the surface modification of PAEK implants in bone tissue engineering.

Recent advances in PLGA-based biomaterials for bone tissue regeneration

Bone regeneration is an interdisciplinary complex lesson, including but not limited to materials science, biomechanics, immunology, and biology. Having witnessed impressive progress in the past decades in the development of bone substitutes; however, it must be said that the most suitable biomaterial for bone regeneration remains an area of intense debate. Since its discovery, poly (lactic-co-glycolic acid) (PLGA) has been widely used in bone tissue engineering due to its good biocompatibility and adjustable biodegradability. This review systematically covers the past and the most recent advances in developing PLGA-based bone regeneration materials. Taking the different application forms of PLGA-based materials as the starting point, we describe each form's specific application and its corresponding advantages and disadvantages with many examples. We focus on the progress of electrospun nanofibrous scaffolds, three-dimensional (3D) printed scaffolds, microspheres/nanoparticles, hydrogels, multiphasic scaffolds, and stents prepared by other traditional and emerging methods. Finally, we briefly discuss the current limitations and future directions of PLGA-based bone repair materials. STATEMENT OF SIGNIFICANCE: As a key synthetic biopolymer in bone tissue engineering application, the progress of PLGA-based bone substitute is impressive. In this review, we summarized the past and the most recent advances in the development of PLGA-based bone regeneration materials. According to the typical application forms and corresponding crafts of PLGA-based substitutes, we described the development of electrospinning nanofibrous scaffolds, 3D printed scaffolds, microspheres/nanoparticles, hydrogels, multiphasic scaffolds and scaffolds fabricated by other manufacturing process. Finally, we briefly discussed the current limitations and proposed the newly strategy for the design and fabrication of PLGA-based bone materials or devices.

A platform for functionalization of cellulose, chitin/chitosan, alginate with polydopamine: A review on fundamentals and technical applications

Nature provides concepts and materials with interesting functionalities to be implemented in innovative and sustainable materials. In this review, it is illustrated how the combination of biological macromolecules, i.e. polydopamine and polysaccharides (cellulose, chitin/chitosan, alginate), enables to create functional materials with controlled properties. The mussel-adhesive properties rely on the secretion of proteins having 3,4-dihydroxyphenylalanine amino acid with catechol groups. Fundamental understanding on the biological functionality and interaction mechanisms of dopamine in the mussel foot plaque is presented in parallel with the development of synthetic analogues through extraction or chemical polymer synthesis. Subsequently, modification of cellulose, chitin/chitosan or alginate and their nanoscale structures with polydopamine is discussed for various technical applications, including bio- and nanocomposites, films, filtration or medical membranes, adhesives, aerogels, or hydrogels. The presence of polydopamine stretches far beyond surface adhesive properties, as it can be used as an intermediate to provide additional performance of hydrophobicity, self-healing, antimicrobial, photocatalytic, sensoric, adsorption, biocompatibility, conductivity, coloring or mechanical properties. The dopamine-based 'green' chemistry can be extended towards generalized catechol chemistry for modification of polysaccharides with tannic acid, caffeic acid or laccase-mediated catechol functionalization. Therefore, the modification of polysaccharides with polydopamine or catechol analogues provides a general platform for sustainable material functionalization.

Polyphenol scaffolds in tissue engineering

Polyphenols are a class of ubiquitous compounds distributed in nature, with fascinating inherent biocompatible, bioadhesive, antioxidant, and antibacterial properties. The unique polyphenolic structures based on catechol or pyrogallol moieties allow for strong non-covalent interactions (e.g., multiple hydrogen bonding, electrostatic, and cation-π interactions) as well as covalent interactions (e.g., Michael addition/Schiff-base reaction, radical coupling reaction, and dynamic coordination interactions with boronate or metal ions). This review article provides an overview of the polyphenol-based scaffolds including the hydrogels, films, and nanofibers that have emerged from chemical and functional signatures during the past years. A full description of the structure-function relationships in terms of their utilization in wound healing, bone regeneration, and electroactive tissue engineering is also carefully discussed, which may pave the path towards the rational design and facile preparation of next-generation polyphenol scaffolds for tissue engineering applications.

Nanocomposite adhesive hydrogels: from design to application

Hydrogels may exhibit strong adhesion upon embedding nanoparticles into them forming strong/weak bonds (via the multiple physical or chemical interactions).

Modeling Endothelialized Hepatic Tumor Microtissues for Drug Screening

Compared to various traditional 2D approaches, the scaffold-based 3D tumor models have emerged as an effective strategy to investigate the complex mechanisms behind cancer progression and responses to drug treatments, by providing biomimetic extracellular matrix and stromal-like microenvironments including the vascular elements. Herein, the development of a 3D endothelialized hepatic tumor microtissue model based on the fusion of multicellular aggregates of human hepatocellular carcinoma cells and human umbilical vein endothelial cells cocultured in poly(lactic-co-glycolic acid)-based porous microspheres (PLGA PMs) is reported. In contrast to the conventional 2D culture, the cells within the PLGA PMs exhibit significantly higher half-maximal inhibitory concentration values against anticancer drugs, including doxorubicin and cisplatin. Furthermore, the feasibility of coculturing other cell types, such as fibroblasts (L929) and HepG2 cells, is investigated. Together, the findings emphasize the significance of engineered 3D hepatic tumor microtissue models using PLGA PM-based multicellular aggregates for drug screening applications.

Ultrastretchable, self-adhesive, strain-sensitive and self-healing GO@DA/Alginate/P(AAc-co-AAm) multifunctional hydrogels via mussel-inspired chemistry

For conductive hydrogels applied in biosensors, wearable devices and so forth, multifunctionality is an inevitable trend of development to meet various practical requirements and enhance human experience. Herein, inspired by nanocomposite, double-network (DN) and mussel chemistry, a new Graphene oxide@Dopamine/Alginate/Poly(acrylic acid-co-acrylamide) [GO@DA/Alginate/P(AAc-co-AAm)] hydrogel was fabricated through one-pot in-situ radical copolymerization. GO@DA nanofillers, prepared via GO confined DA polymerization, imparted the hydrogel with remarkable adhesiveness. Alginate/P(AAc-co-AAm) DN matrix, physically and chemically crosslinked by Fe³⁺ and N,N'-Methylenebisacrylamide, made hydrogels ultrastretchable, self-healing and biocompatible. With contents of DA and alginate accurately regulated, the tensile strength, elongation, adhesion strength and conductivity of the optimal hydrogel could reach 320.2 kPa, 1198 %, 36.9 kPa and 3.24 ± 0.12 S/m, respectively. What's more notable was that the synergistic integration of repeatable adhesiveness, strain sensitivity, use stability, self-healing ability and biocompatibility provided such hydrogels with tremendous possibility of practical application for strain sensors.

Improved Coverage of Mouse Myelomeningocele With a Mussel Inspired Reverse Thermal Gel

BACKGROUND

Myelomeningocele (MMC) is an open neural tube defect of the spinal column. Our laboratory previously introduced a reverse thermal gel (RTG) as the first in situ forming patch for in utero MMC application. To overcome the challenges of anchoring the RTG in the wet amniotic environment to improve MMC coverage, we modified the RTG to mimic the underwater adhesive properties of mussels. We have separated this study into three separate hypotheses-based components: CONCLUSIONS: The DRTG demonstrates increased elasticity, cellular scaffolding properties, and improved MMC coverage in the Grhl3 mouse model. Future studies will be translated to the preclinical ovine model to evaluate this novel gel.

Recent progress in synthesis and application of mussel-inspired adhesives

The rapid and robust adhesion of marine mussels to diverse solid surfaces in wet environments is mediated by the secreted mussel adhesive proteins which are abundant in a catecholic amino acid, l-3,4-dihydroxyphenylalanine (Dopa). Over the last two decades, enormous efforts have been devoted to the development of synthetic mussel-inspired adhesives with water-resistant adhesion and cohesion properties by modifying polymer systems with Dopa and its analogues. In the present review, an overview of the unique features of various mussel foot proteins is provided in combination with an up-to-date understanding of catechol chemistry, which contributes to the strong interfacial binding via balancing a variety of covalent and noncovalent interactions including oxidative cross-linking, electrostatic interaction, metal-catechol coordination, hydrogen bonding, hydrophobic interactions and π-π/cation-π interactions. The recent developments of novel Dopa-containing adhesives with on-demand mechanical properties and other functionalities are then summarized under four broad categories: viscous coacervated adhesives, soft adhesive hydrogels, smart adhesives, and stiff adhesive polyesters, where their emerging applications in engineering, biological and biomedical fields are discussed. Limitations of the developed adhesives are identified and future research perspectives in this field are proposed.

Damage cross-effect and anisotropy in tough double network hydrogels revealed by biaxial stretching

Anisotropy of strain-induced internal damage in tough double network (DN) hydrogels is characterized by a sequence of two tensile experiments. Firstly, the virgin DN gels are subjected to a single biaxial loading-unloading cycle using various combinations of the two maximum strains λx,m and λy,m in the x- and y-directions (λx,m ≥ λy,m). Secondly, the rectangular subsamples, which are cut out from the unloaded specimens so that the long axis can have an angle (θ) relative to the larger pre-strain (x-)axis, are stretched uniaxially along the long axis. Directional internal damage caused by various types of pre-stretching is evaluated by comparing the loading curves of the virgin gels and the subsamples with various θ. The modulus reduction (ΔEθ) and strain-energy reduction (Dθ) are characterized as functions of λx,m, λy,m and θ. The anisotropy of damage increases with the anisotropy of imposed pre-strain field as well as λx,m, which is also observed in the anisotropic re-swelling behavior of the subsamples. The damage and the extensibility of the subsamples with θ = 0° increase with λy,m, and the damage of the subsamples with θ = 90° significantly increases with λx,m. These results reveal the presence of a pronounced damage cross-effect: a finite portion of the chain fractures in the first brittle network in one direction is caused by loading in the other orthogonal direction. This feature is in contrast to the very modest damage cross-effect in the silica reinforced elastomers, which show apparently similar stress-softening behavior but with a different origin. The strong damage cross-effect is a key feature of the internal fracture mechanism of the tough DN gels.

Improving the adhesion, flexibility, and hemostatic efficacy of a sprayable polymer blend surgical sealant by incorporating silica particles

Commercially available surgical sealants for internal use either lack sufficient adhesion or produce cytotoxicity. This work describes a surgical sealant based on a polymer blend of poly(lactic-co-glycolic acid) (PLGA) and poly(ethylene glycol) (PEG) that increases wet tissue adherence by incorporation of nano-to-microscale silica particles, without significantly affecting cell viability, biodegradation rate, or local inflammation. In functional studies, PLGA/PEG/silica composite sealants produce intestinal burst pressures that are comparable to cyanoacrylate glue (160 mmHg), ∼2 times greater than the non-composite sealant (59 mmHg), and ∼3 times greater than fibrin glue (49 mmHg). The addition of silica to PLGA/PEG is compatible with a sprayable in situ deposition method called solution blow spinning and decreases coagulation time in vitro and in vivo. These improvements are biocompatible and cause minimal additional inflammation, demonstrating the potential of a simple composite design to increase adhesion to wet tissue through physical, noncovalent mechanisms and enable use in procedures requiring simultaneous occlusion and hemostasis. STATEMENT OF SIGNIFICANCE: Incorporating silica particles increases the tissue adhesion of a polymer blend surgical sealant. The particles enable interfacial physical bonding with tissue and enhance the flexibility of the bulk of the sealant, without significantly affecting cytotoxicity, inflammation, or biodegradation. These studies also demonstrate how silica particles decrease blood coagulation time. This surgical sealant improves upon conventional devices because it can be easily deposited with accuracy directly onto the surgical site as a solid polymer fiber mat. The deposition method, solution blow spinning, allows for high loading in the composite fibers, which are sprayed from a polymer blend solution containing suspended silica particles. These findings could easily be translated to other implantable or wearable devices due to the versatility of silica particles.

Engineering a naturally-derived adhesive and conductive cardiopatch

Myocardial infarction (MI) leads to a multi-phase reparative process at the site of damaged heart that ultimately results in the formation of non-conductive fibrous scar tissue. Despite the widespread use of electroconductive biomaterials to increase the physiological relevance of bioengineered cardiac tissues in vitro, there are still several limitations associated with engineering biocompatible scaffolds with appropriate mechanical properties and electroconductivity for cardiac tissue regeneration. Here, we introduce highly adhesive fibrous scaffolds engineered by electrospinning of gelatin methacryloyl (GelMA) followed by the conjugation of a choline-based bio-ionic liquid (Bio-IL) to develop conductive and adhesive cardiopatches. These GelMA/Bio-IL adhesive patches were optimized to exhibit mechanical and conductive properties similar to the native myocardium. Furthermore, the engineered patches strongly adhered to murine myocardium due to the formation of ionic bonding between the Bio-IL and native tissue, eliminating the need for suturing. Co-cultures of primary cardiomyocytes and cardiac fibroblasts grown on GelMA/Bio-IL patches exhibited comparatively better contractile profiles compared to pristine GelMA controls, as demonstrated by over-expression of the gap junction protein connexin 43. These cardiopatches could be used to provide mechanical support and restore electromechanical coupling at the site of MI to minimize cardiac remodeling and preserve normal cardiac function.

Recent Developments in Tough Hydrogels for Biomedical Applications

A hydrogel is a three-dimensional polymer network with high water content and has been attractive for many biomedical applications due to its excellent biocompatibility. However, classic hydrogels are mechanically weak and unsuitable for most physiological load-bearing situations. Thus, the development of tough hydrogels used in the biomedical field becomes critical. This work reviews various strategies to fabricate tough hydrogels with the introduction of non-covalent bonds and the construction of stretchable polymer networks and interpenetrated networks, such as the so-called double-network hydrogel. Additionally, the design of tough hydrogels for tissue adhesive, tissue engineering, and soft actuators is reviewed.