Modulating Surface Potential by Controlling the β Phase Content in Poly(vinylidene fluoridetrifluoroethylene) Membranes Enhances Bone Regeneration

Multifunctional scaffolds for bone repair following age-related biological decline: Promising prospects for smart biomaterial-driven technologies

The repair of large bone defects due to trauma, disease, and infection can be exceptionally challenging in the elderly. Despite best clinical practice, bone regeneration within contemporary, surgically implanted synthetic scaffolds is often problematic, inconsistent, and insufficient where additional osteobiological support is required to restore bone. Emergent smart multifunctional biomaterials may drive important and dynamic cellular crosstalk that directly targets, signals, stimulates, and promotes an innate bone repair response following age-related biological decline and when in the presence of disease or infection. However, their role remains largely undetermined. By highlighting their mechanism/s and mode/s of action, this review spotlights smart technologies that favorably align in their conceivable ability to directly target and enhance bone repair and thus are highly promising for future discovery for use in the elderly. The four degrees of interactive scaffold smartness are presented, with a focus on bioactive, bioresponsive, and the yet-to-be-developed autonomous scaffold activity. Further, cell- and biomolecular-assisted approaches were excluded, allowing for contemporary examination of the capabilities, demands, vision, and future requisites of next-generation biomaterial-induced technologies only. Data strongly supports that smart scaffolds hold significant promise in the promotion of bone repair in patients with a reduced osteobiological response. Importantly, many techniques have yet to be tested in preclinical models of aging. Thus, greater clarity on their proficiency to counteract the many unresolved challenges within the scope of aging bone is highly warranted and is arguably the next frontier in the field. This review demonstrates that the use of multifunctional smart synthetic scaffolds with an engineered strategy to circumvent the biological insufficiencies associated with aging bone is a viable route for achieving next-generation therapeutic success in the elderly population.

Electrical Stimulations Generated by P(VDF-TrFE) Films Enhance Adhesion Forces and Odontogenic Differentiation of Dental Pulp Stem Cells (DPSCs)

Biophysical and biochemical cues of biomaterials can regulate cell behaviors. Dental pulp stem cells (DPSCs) in pulp tissues can differentiate to odontoblast-like cells and secrete reparative dentin to form a barrier to protect the underlying pulp tissues and enable complete pulp healing. Promotion of the odontogenic differentiation of DPSCs is essential for dentin regeneration. The effects of the surface potentials of biomaterials on the adhesion and odontogenic differentiation of DPSCs remain unclear. Here, poly(vinylidene fluoride-trifluoro ethylene) (P(VDF-TrFE)) films with different surface potentials were prepared by the spin-coating technique and the contact poling method. The cytoskeletal organization of DPSCs grown on P(VDF-TrFE) films was studied by immunofluorescence staining. Using atomic force microscopy (AFM), the lateral detachment forces of DPSCs from P(VDF-TrFE) films were quantified. The effects of electrical stimulation generated from P(VDF-TrFE) films on odontogenic differentiation of DPSCs were evaluated in vitro and in vivo. The unpolarized, positively polarized, and negatively polarized films had surface potentials of -52.9, +902.4, and -502.2 mV, respectively. DPSCs on both negatively and positively polarized P(VDF-TrFE) films had larger cell areas and length-to-width ratios than those on the unpolarized films (P < 0.05). During the detachment of DPSCs from P(VDF-TrFE) films, the average magnitudes of the maximum detachment forces were 29.4, 72.1, and 53.9 nN for unpolarized, positively polarized, and negatively polarized groups, respectively (P < 0.05). The polarized films enhanced the mineralization activities and increased the expression levels of the odontogenic-related proteins of DPSCs compared to the unpolarized films (P < 0.05). The extracellular signal-regulated kinase (ERK) signaling pathway was involved in the odontogenic differentiation of DPSCs as induced by surface charge. In vivo, the polarized P(VDF-TrFE) films enhanced adhesion of DPSCs and promoted the odontogenic differentiation of DPSCs by electrical stimulation, demonstrating a potential application of electroactive biomaterials for reparative dentin formation in direct pulp capping.

Strontium-Containing Piezoelectric Biofilm Promotes Dentin Tissue Regeneration

It remains an obstacle to induce the regeneration of hard dentin tissue in clinical settings. To overcome this, a P(VDF-TrFE) piezoelectric film with 2 wt% SrCl2 addition is designed. The biofilm shows a high flexibility, a harmonious biocompatibility, and a large piezoelectric d33 coefficient of 14 pC N-1, all contributing to building an electric microenvironment that favor the recruitment of dental pulp stem cells (DPSCs) and their differentiation into odontoblasts during normal chewing, speaking, etc. On the other hand, the strontium ions can be gradually released from the film, thus promoting DPSC odonto-differentiation. In vivo experiments also demonstrate that the film induces the release of dentin minerals and regeneration of dentin tissue. In the large animal dentin defect models, this piezoelectric film induces in situ dentin tissue formation effectively over a period of three months. This study illustrates a therapeutic potential of the piezoelectric film to improve dentin tissue repair in clinical settings.

Wireless Electric Cues Mediate Autologous DPSC-Loaded Conductive Hydrogel Microspheres to Engineer the Immuno-Angiogenic Niche for Homologous Maxillofacial Bone Regeneration

Stem cell therapy serves as an effective treatment for bone regeneration. Nevertheless, stem cells from bone marrow and peripheral blood are still lacking homologous properties. Dental pulp stem cells (DPSCs) are derived from neural crest, in coincidence with maxillofacial tissues, thus attracting great interest in in situ maxillofacial regenerative medicine. However, insufficient number and heterogenous alteration of seed cells retard further exploration of DPSC-based tissue engineering. Electric stimulation has recently attracted great interest in tissue regeneration. In this study, a novel DPSC-loaded conductive hydrogel microspheres integrated with wireless electric generator is fabricated. Application of exogenous electric cues can promote stemness maintaining and heterogeneity suppression for unpredictable differentiation of encapsulated DPSCs. Further investigations observe that electric signal fine-tunes regenerative niche by improvement on DPSC-mediated paracrine pattern, evidenced by enhanced angiogenic behavior and upregulated anti-inflammatory macrophage polarization. By wireless electric stimulation on implanted conductive hydrogel microspheres, loaded DPSCs facilitates the construction of immuno-angiogenic niche at early stage of tissue repair, and further contributes to advanced autologous mandibular bone defect regeneration. This novel strategy of DPSC-based tissue engineering exhibits promising translational and therapeutic potential for autologous maxillofacial tissue regeneration.

Biomaterial scaffolds in maxillofacial bone tissue engineering: A review of recent advances

Maxillofacial bone defects caused by congenital malformations, trauma, tumors, and inflammation can severely affect functions and aesthetics of maxillofacial region. Despite certain successful clinical applications of biomaterial scaffolds, ideal bone regeneration remains a challenge in maxillofacial region due to its irregular shape, complex structure, and unique biological functions. Scaffolds that address multiple needs of maxillofacial bone regeneration are under development to optimize bone regeneration capacity, costs, operational convenience. etc. In this review, we first highlight the special considerations of bone regeneration in maxillofacial region and provide an overview of the biomaterial scaffolds for maxillofacial bone regeneration under clinical examination and their efficacy, which provide basis and directions for future scaffold design. Latest advances of these scaffolds are then discussed, as well as future perspectives and challenges. Deepening our understanding of these scaffolds will help foster better innovations to improve the outcome of maxillofacial bone tissue engineering.

Piezoelectrically and Topographically Engineered Scaffolds for Accelerating Bone Regeneration

Bone regeneration remains a critical concern across diverse medical disciplines, because it is a complex process that requires a combinatorial approach involving the integration of mechanical, electrical, and biological stimuli to emulate the native cellular microenvironment. In this context, piezoelectric scaffolds have attracted considerable interest owing to their remarkable ability to generate electric fields in response to dynamic forces. Nonetheless, the application of such scaffolds in bone tissue engineering has been limited by the lack of a scaffold that can simultaneously provide both the intricate electromechanical environment and the biocompatibility of the native bone tissue. Here, we present a pioneering biomimetic scaffold that combines the unique properties of piezoelectric and topographical enhancement with the inherent osteogenic abilities of hydroxyapatite (HAp). Notably, the novelty of this work lies in the incorporation of HAp into polyvinylidene fluoride-co-trifluoro ethylene in a freestanding form, leveraging its natural osteogenic potential within a piezoelectric framework. Through comprehensive in vitro and in vivo investigations, we demonstrate the remarkable potential of these scaffolds to accelerate bone regeneration. Moreover, we demonstrate and propose three pivotal mechanisms─(i) electrical, (ii) topographical, and (iii) paracrine─that collectively contribute to the facilitated bone healing process. Our findings present a synergistically derived biomimetic scaffold design with wide-ranging prospects for bone regeneration as well as various regenerative medicine applications.

Accelerated Bone Regeneration on the Metal Surface through Controllable Surface Potential

Surface potential is rarely investigated as an independent factor in influencing tissue regeneration on the metal surface. In this work, the surface potential on the titanium (Ti) surface was designed to be tailored and adjusted independently, which arises from the ferroelectricity and piezoelectricity of poled poly(vinylidene fluoride-trifluoroethylene) (PVTF). Notably, it is found that such controllable surface potential on the metal surface significantly promotes osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs) in vitro as well as bone regeneration in vivo. In addition, the intracellular calcium ion (Ca2+) concentration measurement further proves that such controllable surface potential on the metal surface could activate the transmembrane calcium channels and allow the influx of extracellular Ca2+ into the cytoplasm. That might be the reason for improved osteogenic differentiation of BMSCs and bone regeneration. These findings reveal the potential of the metal surface with improved bioactivity for stimulation of osteogenesis and show great prospects for fabricable implantable medical devices with adjustable surface potential.

Reactive oxygen species for therapeutic application: Role of piezoelectric materials

This perspective article emphasizes the significant role of reactive oxygen species (ROS) in in vivo remedial therapy of various diseases and complications, capitalizing on their potential reactivity. Among the various influencers, herein, piezoelectric materials driven ROS generation activity is primarily considered. Intrinsic non-centrosymmetry of piezoelectric materials makes them suitable for distinct dipole formation in the presence of external mechanical stimuli. Such characteristics prompt the positioning of opposite charged carriers to execute associated redox transformations that effectively participate to generate ROS in the aqueous media of the cell cytoplasm, organelles and nucleus. The immense reactivity of piezoelectric material driven ROS is fostered to terminate cellular toxicity or curtail tumor cell growth, due to their higher specificity. This perspective considers the conjugated performance of piezoelectric materials and ultrasound which can remotely generate electrical charges that promote ROS production for therapeutic application. In particular, a substantial synopsis is provided for the remedial activity of numerous piezocatalytic materials in tumor cell apoptosis, antibacterial treatment, dental care and neurological disorders. Subsequently, the report precisely demonstrates the methods involving various spectrophotometric approaches for the analysis of the ROS. Finally, the key challenges of piezoelectric material-based therapy are discussed and systematic future progress is outlined.

Integrated Piezoelectric/Conductive Composite Cryogel Creates Electroactive Microenvironment for Enhanced Bone Regeneration

Natural bone tissue possesses inherent electrophysiological characteristics, displaying conductivity and piezoelectricity simultaneously; hence, the reconstruction of local electrical microenvironment at defect site provides an effective strategy to enhance osteogenesis. Herein, a composite cryogel-type scaffold (referred to as Gel-PD-CMBT) is developed for bone regeneration, utilizing gelatin (Gel) in combination with a conductive poly(ethylene dioxythiophene)/polystyrene sulfonate matrix and Ca/Mn co-doped barium titanate (CMBT) nanofibers as the piezoelectric filler. The incorporation of these components results in the formation of an integrated piezoelectric/conductive network within the scaffold, facilitating charge migration and yielding a conductivity of 0.59 S cm-1 . This conductive scaffold creates a promising electroactive microenvironment, which is capable of up-regulating biological responses. Furthermore, the interconnected porous structure of the Gel-PD-CMBT scaffold not only provides mechanical stability but also offered ample space for cellular and tissue ingrowth. This Gel-PD-CMBT scaffold demonstrates a greater capacity to promote cellular osteogenic differentiation in vitro and neo-bone formation in vivo. In summary, the Gel-PD-CMBT scaffold, with its integrated piezoelectricity and conductivity, effectively restores the local electroactive microenvironment, offering an ideal platform for the regeneration of electrophysiological bone tissue.

Physical stimuli-emitting scaffolds: The role of piezoelectricity in tissue regeneration

The imbalance between life expectancy and quality of life is increasing due to the raising prevalence of chronic diseases. Musculoskeletal disorders and chronic wounds affect a growing percentage of people and demand more efficient tools for regenerative medicine. Scaffolds that can better mimic the natural physical stimuli that tissues receive under healthy conditions and during healing may significantly aid the regeneration process. Shape, mechanical properties, pore size and interconnectivity have already been demonstrated to be relevant scaffold features that can determine cell adhesion and differentiation. Much less attention has been paid to scaffolds that can deliver more dynamic physical stimuli, such as electrical signals. Recent developments in the precise measurement of electrical fields in vivo have revealed their key role in cell movement (galvanotaxis), growth, activation of secondary cascades, and differentiation to different lineages in a variety of tissues, not just neural. Piezoelectric scaffolds can mimic the natural bioelectric potentials and gradients in an autonomous way by generating the electric stimuli themselves when subjected to mechanical loads or, if the patient or the tissue lacks mobility, ultrasound irradiation. This review provides an analysis on endogenous bioelectrical signals, recent developments on piezoelectric scaffolds for bone, cartilage, tendon and nerve regeneration, and their main outcomes in vivo. Wound healing with piezoelectric dressings is addressed in the last section with relevant examples of performance in animal models. Results evidence that a fine adjustment of material composition and processing (electrospinning, corona poling, 3D printing, annealing) provides scaffolds that act as true emitters of electrical stimuli that activate endogenous signaling pathways for more efficient and long-term tissue repair.

In situ activation of flexible magnetoelectric membrane enhances bone defect repair

For bone defect repair under co-morbidity conditions, the use of biomaterials that can be non-invasively regulated is highly desirable to avoid further complications and to promote osteogenesis. However, it remains a formidable challenge in clinical applications to achieve efficient osteogenesis with stimuli-responsive materials. Here, we develop polarized CoFe₂O₄@BaTiO₃/poly(vinylidene fluoridetrifluoroethylene) [P(VDF-TrFE)] core-shell particle-incorporated composite membranes with high magnetoelectric conversion efficiency for activating bone regeneration. An external magnetic field force conduct on the CoFe₂O₄ core can increase charge density on the BaTiO₃ shell and strengthens the β-phase transition in the P(VDF-TrFE) matrix. This energy conversion increases the membrane surface potential, which hence activates osteogenesis. Skull defect experiments on male rats showed that repeated magnetic field applications on the membranes enhanced bone defect repair, even when osteogenesis repression is elicited by dexamethasone or lipopolysaccharide-induced inflammation. This study provides a strategy of utilizing stimuli-responsive magnetoelectric membranes to efficiently activate osteogenesis in situ.

Sonopiezoelectric Nanomedicine and Materdicine

Endogenous electric field is ubiquitous in a multitude of important living activities such as bone repair, cell signal transduction, and nerve regeneration, signifying that regulating the electric field in organisms is highly beneficial to maintain organism health. As an emerging and promising research direction, piezoelectric nanomedicine and materdicine precisely activated by ultrasound with synergetic advantages of deep tissue penetration, remote spatiotemporal selectivity, and mechanical-electrical energy interconversion, have been progressively utilized for disease treatment and tissue repair by participating in the modulation of endogenous electric field. This specific nanomedicine utilizing piezoelectric effect activated by ultrasound is typically regarded as "sonopiezoelectric nanomedicine". This comprehensive review summarizes and discusses the substantially employed sonopiezoelectric nanomaterials and nanotherapies to provide an insight into the internal mechanism of the corresponding biological behavior/effect of sonopiezoelectric biomaterials in versatile disease treatments. This review primarily focuses on the sonopiezoelectric biomaterials for biosensing, drug delivery, tumor therapy, tissue regeneration, antimicrobia, and further illuminates the underlying sonopiezoelectric mechanism. In addition, the challenges and developments/prospects of sonopiezoelectric nanomedicine are analyzed for promoting the further clinical translation. It is earnestly expected that this kind of nanomedicine/biomaterials-enabled sonopiezoelectric technology will provoke the comprehensive investigation and promote the clinical development of the next-generation multifunctional materdicine.

Regulation of Macrophage Polarization on Chiral Potential Distribution of CFO/P(VDF-TrFE) Films

Surface potentials of biomaterials have been shown to regulate cell fate commitment. However, the effects of chirality-patterned potential distribution on macrophage polarization are still only beginning to be explored. In this work, we demonstrated that the chirality-patterned potential distribution of CoFe₂O₄/poly(vinylidene fluoride-trifluoroethylene) (CFO/P(VDF-TrFE)) films could significantly down-regulate the M1 polarization of bone marrow-derived macrophages (BMDMs). Specifically, the dextral-patterned surface potential distribution simultaneously up-regulated the expression of M2-related markers of BMDMs. The results were attributed to the sensitive difference of integrin subunits (α₅β₁ and α_vβ₃) to the dextral- and sinistral-patterned surface potential distribution, respectively. The interaction difference between the integrin subunits and surface potential distribution altered the cell adhesion and cytoskeletal structure and thereby the polarization behavior of BMDMs. This work, therefore, emphasizes the importance of chirality of potential distribution on cell behavior and provides a new strategy to regulate the immune response of biomaterials.

Electric/Magnetic Intervention for Bone Regeneration: A Systematic Review and Network Meta-Analysis

Electric/magnetic material or field is a promising strategy for bone regeneration. The aim of this systematic review and network meta-analysis was to analyze the evidence regarding the efficacy of electric and magnetic intervention for bone regeneration and provide directions for further research. A comprehensive search was performed to identify the rats/rabbits/mice research that involved the electric/magnetic treatment with quantitative radiographic assessment of bone formation. Network meta-analyses were also conducted to assess different interventions and outcomes for osteogenesis. In total, there were 51 articles included in the systematic review and 19 articles in the network meta-analyses. The majority used microcomputerized tomography bone volume/tissue volume (BV/TV) to evaluate outcomes in rats. Results showed that placing electric/magnetic materials in situ had more prominent effects than the electric/magnetic field on bone regeneration. For all species, electrical materials with zeta potential of -53 mV proved to be the most effective in increasing BV (mean difference [MD]: 4.20 mm³, 95% confidence interval [CI]: [1.72-6.68]) and bone mineral density (MD: 312 mg/cm³, 95% CI: [172.43-451.57]). Magnetic materials with external magnetic fields topped in BV/TV (MD: 43%, 95% CI: [36.04-49.96]). It also led in trabecular number (MD: 2.00 mm^-1, 95% CI: [1.45-2.55]), trabecular thickness (MD: 61.00 μm, 95% CI: [44.31- 77.69]), and trabecular separation (MD: -0.40 mm, 95% CI: [-0.56 to -0.24]) on the condition of lacking electric materials. Biomaterials implantation is the most effective method for stimulating osteogenesis in rats, especially in electrical materials with negative charge. The combination of diverse interventions shows promising effects but needs further research, so does the underlying mechanism. Impact Statement Bone defect, especially for the large defect from aging, trauma, or pathology, which cannot be completely healed, remains a clinical challenge. Mimicking physical microenvironment has emerged as a new strategy for tissue regeneration. Electric and magnetic material and field used as the physical stimulation for bone regeneration have attracted interest due to their potential and facile application in clinic. This article reviewed related animal studies and carried out a network meta-analysis to thoroughly understand how electric and magnetic interventions impacted on tissues and created an osteogenic microenvironment.

Nanostructure Mediated Piezoelectric Effect of Tetragonal BaTiO3 Coatings on Bone Mesenchymal Stem Cell Shape and Osteogenic Differentiation

In recent years, porous titanium (Ti) scaffolds with BaTiO₃ coatings have been designed to promote bone regeneration. However, the phase transitions of BaTiO₃ have been understudied, and their coatings have yielded low effective piezoelectric coefficients (EPCs < 1 pm/V). In addition, piezoelectric nanomaterials bring many advantages in eliciting cell-specific responses. However, no study has attempted to design a nanostructured BaTiO₃ coating with high EPCs. Herein, nanoparticulate tetragonal phase BaTiO₃ coatings with cube-like nanoparticles but different effective piezoelectric coefficients were fabricated via anodization combining two hydrothermal processes. The effects of nanostructure-mediated piezoelectricity on the spreading, proliferation, and osteogenic differentiation of human jaw bone marrow mesenchymal stem cells (hJBMSCs) were explored. We found that the nanostructured tetragonal BaTiO₃ coatings exhibited good biocompatibility and an EPC-dependent inhibitory effect on hJBMSC proliferation. The nanostructured tetragonal BaTiO₃ coatings of relatively smaller EPCs (<10 pm/V) exhibited hJBMSC elongation and reorientation, broad lamellipodia extension, strong intercellular connection and osteogenic differentiation enhancement. Overall, the improved hJBMSC characteristics make the nanostructured tetragonal BaTiO₃ coatings promising for application on implant surfaces to promote osseointegration.

MXene-Functionalized Ferroelectric Nanocomposite Membranes with Modulating Surface Potential Enhance Bone Regeneration

Rapid and effective bone defect repair remains a challenging issue for clinical treatment. Applying biomaterials with endogenous surface potential has been widely studied to enhance bone regeneration, but how to regulate the electric potential and surface morphology of the implanted materials precisely to achieve an optimal bioelectric microenvironment is still a major challenge. The aim of this study is to develop electroactive biomaterials that better mimic the extracellular microenvironment for bone regeneration. Hence, MXene/polyvinylidene fluoride (MXene/PVDF) ferroelectric nanocomposite membranes were prepared by electrospinning. Physicochemical characterization demonstrated that Ti₃C₂T_x MXene nanosheets were wrapped in PVDF shell layer and the surface morphology and potential were modulated by altering the content of MXene, where uniform distribution of fibers and enhanced electric potential can be obtained and precisely assembled into a natural extracellular matrix (ECM) in bone tissue. Consequently, the MXene/PVDF membranes facilitated cell adhesion, stretching, and growth, showing good biocompatibility; meanwhile, their intrinsic electric potential promoted the recruitment of osteogenic cells and accelerated the differentiation of osteoblast. Furthermore, 1 wt % MXene/PVDF membrane with a suitable surface potential and better topographical structure for bone regeneration qualitatively and quantitatively promoted bone tissue formation in a rat calvarial bone defect after 4 and 8 weeks of healing. The fabricated MXene/PVDF ferroelectric nanocomposite membranes show a biomimetic microenvironment with a sustainable electric potential and optimal 3D topographical structure, providing an innovative and well-suited strategy for application in bone regeneration.

Restoring the electrical microenvironment using ferroelectric nanocomposite membranes to enhance alveolar ridge regeneration in a mini-pig preclinical model

The maintenance and incremental growth of the alveolar bone at the tooth extraction site, to achieve the required height and width for implant restoration, remains a major clinical challenge. Here, the concept of restoring the electrical microenvironment to improve the effects of alveolar ridge preservation (ARP) was investigated in a mini-pig preclinical model. The endogeneous electrical microenvironment of the dental alveolar socket was recapitulated by fabricating a biomimetic ferroelectric BaTiO₃/poly(vinylidene fluoridetrifluoroethylene) (BTO/P(VDF-TrFE)) non-resorbable nanocomposite membrane polarized by corona poling. The polarized nanocomposite membrane exhibited excellent electrical stability. After implantation with bone grafts and covering with the charged membrane in tooth extraction sites for three months, both the vertical and horizontal dimension resorption of the alveolar ridge were significantly prevented, as assessed by cone beam computed tomography (CBCT) analyses. Micro-CT analysis showed that the charged membrane induced significant enhancement of newly regenerated bone at the tooth extraction sites. Histological analysis further confirmed that the restoration of the electrical microenvironment significantly promoted buccal alveolar bone regeneration and maturation. In addition, the charged membranes can maintain their structural integrity during the entire implantation period and exhibit positive long-term systemic safety, as assessed by preclinical sub-chronic systemic toxicity. These findings thus provide an innovative strategy for restoring the electrical microenvironment to enhance ARP following dentition defect and edentulism, which could further advance prosthodontics implant technology.

Electrical charge on ferroelectric nanocomposite membranes enhances SHED neural differentiation

Stem cells from human exfoliated deciduous teeth (SHED) uniquely exhibit high proliferative and neurogenic potential. Charged biomaterials have been demonstrated to promote neural differentiation of stem cells, but the dose-response effect of electrical stimuli from these materials on neural differentiation of SHED remains to be elucidated. Here, by utilizing different annealing temperatures prior to corona poling treatment, BaTiO₃/P(VDF-TrFE) ferroelectric nanocomposite membranes with varying charge polarization intensity (d₃₃ ≈ 0, 4, 12 and 19 pC N⁻¹) were fabricated. Enhanced expression of neural markers, increased cell elongation and more prominent neurite outgrowths were observed with increasing surface charge of the nanocomposite membrane indicating a dose-response effect of surface electrical charge on SHED neural differentiation. Further investigations of the underlying molecular mechanisms revealed that intracellular calcium influx, focal adhesion formation, FAK-ERK mechanosensing pathway and neurogenic-related ErbB signaling pathway were implicated in the enhancement of SHED neural differentiation by surface electrical charge. Hence, this study confirms the dose-response effect of biomaterial surface charge on SHED neural differentiation and provides preliminary insights into the molecular mechanisms and signaling pathways involved.

•

Membrane surface charge can be precisely controlled by adjusting annealing temperature and corona poling parameters.

•

Both earlier and later neurogenic differentiation of SHED appear to be dose-dependently enhanced by surface charge.

•

Underlying molecular mechanisms may involve intracellular Ca2+ influx, focal adhesion formation, FAK-ERK and ErbB signaling.

Janus electro-microenvironment membrane with surface-selective osteogenesis/gingival healing ability for guided bone regeneration

Guided bone regeneration is widely applied in clinical practice to treat alveolar bone defects. However, the rate of healing of severe alveolar bone defects is slow, and there is a high incidence of soft tissue wound dehiscence. In this study, we propose a barrier membrane with a Janus electro-microenvironment (JEM) to achieve side-selective bone regeneration and soft tissue healing. The JEM membrane was constructed using a polarized polyvinylidene fluoride ferroelectric membrane with different surface potentials on either side. It promoted osteogenic differentiation and bone regeneration on the negatively polarized side (JEM-) and soft tissue regeneration on the positively polarized side (JEM+). Further investigation revealed that the JEM-mediated promotion of bone formation was related to mitochondrial autophagy, as indicated by depolarization of the mitochondrial membrane potential and the expression of LC3, Pink I, and Parkin. Moreover, the gingival healing promoted by JEM+ was related to oxidative phosphorylation in mitochondria, as indicated by the upregulation of mitochondrial complexes I–V and an increase in ATP generation. The design concept of the JEM provides a new avenue for regulating tissue regeneration between different tissue interfaces.

The Osteogenic Role of Barium Titanate/Polylactic Acid Piezoelectric Composite Membranes as Guiding Membranes for Bone Tissue Regeneration

Purpose

Biopiezoelectric materials have good biocompatibility and excellent piezoelectric properties, and they can generate local currents in vivo to restore the physiological electrical microenvironment of the defect and promote bone regeneration. Previous studies of guided bone regeneration membranes have rarely addressed the point of restoring it, so this study prepared a Barium titanate/Polylactic acid (BT/PLA) piezoelectric composite membrane and investigated its bone-formation, with a view to providing an experimental basis for clinical studies of guided bone tissue regeneration membranes.

Methods

BT/PLA composite membranes with different BT ratio were prepared by solution casting method, and piezoelectric properties were performed after corona polarization treatment. The optimal BT ratio was selected and then subjected to in vitro cytological experiments and in vivo osteogenic studies in rats. The effects on adhesion, proliferation and osteogenic differentiation of the pre-osteoblastic cell line (MC3T3-E1) were investigated. The effect of composite membranes on bone repair of cranial defects in rats was investigated after 4 and 12 weeks.

Results

The highest piezoelectric coefficient d33 were obtained when the BT content was 20%, reaching (7.03 ± 0.26) pC/N. The value could still be maintained at (4.47±0.17) pC/N after 12 weeks, meeting the piezoelectric constant range of bone. In vitro, the MC3T3-E1 cells showed better adhesion and proliferative activity in the group of polarized 20%BT. The highest alkaline phosphatase (ALP) content was observed in cells of this group. In vivo, it promoted rapid bone regeneration. At 4 weeks postoperatively, new bone formation was evident at the edges of the defect, with extensive marrow cavity formation; after 12 weeks, the defect was essentially completely closed, with density approximating normal bone tissue and significant mineralization.

Conclusion

The BT/PLA piezoelectric composite membrane has good osteogenic properties and provides a new idea for guiding the research of membrane materials for bone tissue regeneration.

Biomimicking design of artificial periosteum for promoting bone healing

Background

Periosteum is a vascularized tissue membrane covering the bone surface and plays a decisive role in bone reconstruction process after fracture. Various artificial periosteum has been developed to assist the allografts or bionic bone scaffolds in accelerating bone healing. Recently, the biomimicking design of artificial periosteum has attracted increasing attention due to the recapitulation of the natural extracellular microenvironment of the periosteum and has presented unique capacity to modulate the cell fates and ultimately enhance the bone formation and improve neovascularization.

Methods

A systematic literature search is performed and relevant findings in biomimicking design of artificial periosteum have been reviewed and cited.

Results

We give a systematical overview of current development of biomimicking design of artificial periosteum. We first summarize the universal strategies for designing biomimicking artificial periosteum including biochemical biomimicry and biophysical biomimicry aspects. We then discuss three types of novel versatile biomimicking artificial periosteum including physical-chemical combined artificial periosteum, heterogeneous structured biomimicking periosteum, and healing phase-targeting biomimicking periosteum. Finally, we comment on the potential implications and prospects in the future design of biomimicking artificial periosteum.

Conclusion

This review summarizes the preparation strategies of biomimicking artificial periosteum in recent years with a discussion of material selection, animal model adoption, biophysical and biochemical cues to regulate the cell fates as well as three types of latest developed versatile biomimicking artificial periosteum. In future, integration of innervation, osteochondral regeneration, and osteoimmunomodulation, should be taken into consideration when fabricating multifunctional artificial periosteum.

The Translational Potential of this Article: This study provides a holistic view on the design strategy and the therapeutic potential of biomimicking artificial periosteum to promote bone healing. It is hoped to open a new avenue of artificial periosteum design with biomimicking considerations and reposition of the current strategy for accelerated bone healing.

Comparative review of piezoelectric biomaterials approach for bone tissue engineering

Bone as a minerals' reservoir and rigid tissue of the body generating red and white blood cells supports various organs. Although the self-regeneration property of bone, it cannot regenerate spontaneously in severe damages and still remains as a challenging issue. Tissue engineering offers several techniques for regenerating damaged bones, where various biomaterials are examined to fabricate scaffolds for bone repair. Piezoelectric characteristic plays a crucial role in repairing and regenerating damaged bone by mimicking the bone niche behavior. Piezoelectric biomaterials show significant potential for bone tissue engineering. Herein we try to have a comparative review on piezoelectric and non-piezoelectric biomaterials used in bone tissue engineering, classified them, and discussed their effects on implanted cells and manufacturing techniques. Especially, Polyvinylidene fluoride (PVDF) and its composites are the most practically used piezoelectric biomaterials for bone regeneration. PVDF and its composites have been summarized and discussed to repair damaged bone tissues.

Researching progress on bio-reactive electrogenic materials with electrophysiological activity for enhanced bone regeneration

Bone tissues are dynamically reconstructed during the entire life cycle phase, which is an exquisitely regulated process controlled by intracellular and intercellular signals transmitted through physicochemical and biochemical stimulation. Recently, the role of electrical activity in promoting bone regeneration has attracted great attention, making the design, fabrication, and selection of bioelectric bio-reactive materials a focus. Under specific conditions, piezoelectric, photoelectric, magnetoelectric, acoustoelectric, and thermoelectric materials can generate bioelectric signals similar to those of natural tissues and stimulate osteogenesis-related signaling pathways to enhance the regeneration of bone defects, which can be used for designing novel smart biological materials for engineering tissue regeneration. However, literature summarizing studies relevant to bioelectric materials for bone regeneration is rare to our knowledge. Consequently, this review is mainly focused on the biological mechanism of electrical stimulation in the regeneration of bone defects, the current state and future prospects of piezoelectric materials, and other bioelectric active materials suitable for bone tissue engineering in recent studies, aiming to provide a theoretical basis for novel clinical treatment strategies for bone defects.

Electreted Sandwich Membranes with Persistent Electrical Stimulation for Enhanced Bone Regeneration

Physiologically relevant electrical microenvironments play an indispensable role in manipulating bone metabolism. Although implanted biomaterials that simulate the electrical properties of natural tissues using conductive or piezoelectric materials have been introduced in the field of bone regeneration, the application of electret materials to provide stable and persistent electrical stimulation has rarely been studied in biomaterial design. In this study, a silicon dioxide electret-incorporated poly(dimethylsiloxane) (SiO₂/PDMS) composite electroactive membrane was designed and fabricated to explore its bone regeneration efficacy. SiO₂ electrets were homogeneously dispersed in the PDMS matrix, and sandwich-like composite membranes were fabricated using a facile layer-by-layer blade-coating method. Following the encapsulation, electret polarization was conducted to obtain the electreted composite membranes. The surface potential of the composite membrane could be adjusted to a bone-promotive biopotential by tuning the electret concentration, and the prepared membranes exhibited favorable electrical stability during an observation period of up to 42 days. In vitro biological experiments indicated that the electreted SiO₂/PDMS membrane promoted cellular activity and osteogenic differentiation of mesenchymal stem cells. In vivo, the electreted composite membrane remarkably facilitated bone regeneration through persistent endogenous electrical stimulation. These findings suggest that the electreted sandwich-like membranes, which maintain a stable and physiological electrical microenvironment, are promising candidates for enhancing bone regeneration.

Electrical stimulation: Effective cue to direct osteogenic differentiation of mesenchymal stem cells?

Mesenchymal stem cells (MSCs) play a major role in bone tissue engineering (BTE) thanks to their capacity for osteogenic differentiation and being easily available. In vivo, MSCs are exposed to an electroactive microenvironment in the bone niche, which has piezoelectric properties. The correlation between the electrically active milieu and bone's ability to adapt to mechanical stress and self-regenerate has led to using electrical stimulation (ES) as physical cue to direct MSCs differentiation towards the osteogenic lineage in BTE. This review summarizes the different techniques to electrically stimulate MSCs to induce their osteoblastogenesis in vitro, including general electrical stimulation and substrate mediated stimulation by means of conductive or piezoelectric cell culture supports. Several aspects are covered, including stimulation parameters, treatment times and cell culture media to summarize the best conditions for inducing MSCs osteogenic commitment by electrical stimulation, from a critical point of view. Electrical stimulation activates different signaling pathways, including bone morphogenetic protein (BMP) Smad-dependent or independent, regulated by mitogen activated protein kinases (MAPK), extracellular signal-regulated kinases (ERK) and p38. The roles of voltage gate calcium channels (VGCC) and integrins are also highlighted according to their application technique and parameters, mainly converging in the expression of RUNX2, the master regulator of the osteogenic differentiation pathway. Despite the evident lack of homogeneity in the approaches used, the ever-increasing scientific evidence confirms ES potential as an osteoinductive cue, mimicking aspects of the in vivo microenvironment and moving one step forward to the translation of this approach into clinic.

Integrated osteochondral differentiation of mesenchymal stem cells on biomimetic nanofibrous mats with cell adhesion-generated piezopotential gradients

Biomimetic piezoelectric scaffolds provide a noninvasive method for in vivo cell regulation and tissue regeneration. Herein, considering the gradually varied piezoelectric properties of native cartilage and bone tissues, we fabricated biomimetic electrospun poly(L-lactic acid) (PLLA) nanofibrous mats with gradient piezoelectric properties to induce the integrated osteochondral differentiation of rat mesenchymal stem cells (MSCs). Nanofibrous mats are polarized under electric fields with linear variation of strength to generate gradient piezoelectricity, and cell adhesion-derived contraction forces could produce gradient piezoelectric potential on the scaffolds. Our results demonstrated that the piezoelectric potential could positively modulate cell adhesion, intracellular calcium transients, Ca²⁺ binding proteins, and differentiation-related genes. In addition, the differentiation of MSCs into osteogenic and chondrogenic lineages was integrated on a single scaffold at different areas with relatively high and low piezoelectricity values, respectively. The continuous gradient scaffold exhibited the potential to provide a smooth transition between the cartilage and bone, offering new insights to probe the regeneration mechanisms of the osteochondral tissue in a single scaffold and inspiring a future efficient and rational design of piezoelectric smart biomaterials for tissue engineering.

The osteogenic response to chirality-patterned surface potential distribution of CFO/P(VDF-TrFE) membranes

Piezoelectric poly(vinylidene fluoride-trifluoroethylene) has demonstrated an ability to promote osteogenesis, and the biomaterials with a chirality-patterned topological surface could enhance cellular osteogenic differentiation. In this work, we created a chirality-patterned...

Biophysical Stimuli as the Fourth Pillar of Bone Tissue Engineering

The repair of critical bone defects remains challenging worldwide. Three canonical pillars (biomaterial scaffolds, bioactive molecules, and stem cells) of bone tissue engineering have been widely used for bone regeneration in separate or combined strategies, but the delivery of bioactive molecules has several obvious drawbacks. Biophysical stimuli have great potential to become the fourth pillar of bone tissue engineering, which can be categorized into three groups depending on their physical properties: internal structural stimuli, external mechanical stimuli, and electromagnetic stimuli. In this review, distinctive biophysical stimuli coupled with their osteoinductive windows or parameters are initially presented to induce the osteogenesis of mesenchymal stem cells (MSCs). Then, osteoinductive mechanisms of biophysical transduction (a combination of mechanotransduction and electrocoupling) are reviewed to direct the osteogenic differentiation of MSCs. These mechanisms include biophysical sensing, transmission, and regulation. Furthermore, distinctive application strategies of biophysical stimuli are presented for bone tissue engineering, including predesigned biomaterials, tissue-engineered bone grafts, and postoperative biophysical stimuli loading strategies. Finally, ongoing challenges and future perspectives are discussed.

Electroactive Biomaterials and Systems for Cell Fate Determination and Tissue Regeneration: Design and Applications

During natural tissue regeneration, tissue microenvironment and stem cell niche including cell-cell interaction, soluble factors, and extracellular matrix (ECM) provide a train of biochemical and biophysical cues for modulation of cell behaviors and tissue functions. Design of functional biomaterials to mimic the tissue/cell microenvironment have great potentials for tissue regeneration applications. Recently, electroactive biomaterials have drawn increasing attentions not only as scaffolds for cell adhesion and structural support, but also as modulators to regulate cell/tissue behaviors and function, especially for electrically excitable cells and tissues. More importantly, electrostimulation can further modulate a myriad of biological processes, from cell cycle, migration, proliferation and differentiation to neural conduction, muscle contraction, embryogenesis, and tissue regeneration. In this review, endogenous bioelectricity and piezoelectricity are introduced. Then, design rationale of electroactive biomaterials is discussed for imitating dynamic cell microenvironment, as well as their mediated electrostimulation and the applying pathways. Recent advances in electroactive biomaterials are systematically overviewed for modulation of stem cell fate and tissue regeneration, mainly including nerve regeneration, bone tissue engineering, and cardiac tissue engineering. Finally, the significance for simulating the native tissue microenvironment is emphasized and the open challenges and future perspectives of electroactive biomaterials are concluded.

Recent advances of polymer-based piezoelectric composites for biomedical applications

Over the past decades, electronics have become central to many aspects of biomedicine and wearable device technologies as a promising personalized healthcare platform. Lead-free piezoelectric materials for converting mechanical into electrical energy through piezoelectric transduction are of significant value in a diverse range of technological applications. Organic piezoelectric biomaterials have attracted widespread attention as the functional materials in the biomedical devices due to their advantages of excellent biocompatibility. They include synthetic and biological polymers. Many biopolymers have been discovered to possess piezoelectricity in an appreciable amount, however their investigation is still preliminary. Due to their piezoelectric properties, better known synthetic fluorinated polymers have been intensively investigated and applied in biomedical applications including controlled drug delivery systems, tissue engineering, microfluidic and artificial muscle actuators, among others. Piezoelectric polymers, especially poly (vinylidene fluoride) (PVDF) and its copolymers are increasingly receiving interest as smart biomaterials due to their ability to convert physiological movements to electrical signals when in a controllable and reproducible manner. Despite possessing the greatest piezoelectric coefficients among all piezoelectric polymers, it is often desirable to increase the electrical outputs. The most promising routes toward significant improvements in the piezoelectric response and energy-harvesting performance of such materials is loading them with various inorganic nanofillers and/or applying some modification during the fabrication process. This paper offers a comprehensive review of the principles, properties, and applications of organic piezoelectric biomaterials (polymers and polymer/ceramic composites) with special attention on PVDF-based polymers and their composites in sensors, drug delivery and tissue engineering. Subsequently focuses on the most common fabrication routes to produce piezoelectric scaffolds, tissue and sensors which is electrospinning process. Promising upcoming strategies and new piezoelectric materials and fabrication techniques for these applications are presented to enable a future integration among these applications.

Bone Piezoelectricity-Mimicking Nanocomposite Membranes Enhance Osteogenic Differentiation of Bone Marrow Mesenchymal Stem Cells by Amplifying Cell Adhesion and Actin Cytoskeleton

Ferroelectric biomaterials have been widely investigated and demonstrated to enhance osteogenesis by simulating the inherent electrical properties of bone tissues. Nevertheless, the underlying biological processes are still not wellunderstood. Hence, this study investigated the underlying biological processes by which bone piezoelectricity-mimicking barium titanate/poly(vinylidene fluoride-trifluoroethylene) nanocomposite membranes (BTO nanocomposite membranes) promote osteogenesis of Bone Marrow Mesenchymal Stem Cells (BMSCs). Ourresults revealed that the piezoelectric coefficient (d₃₃) of nanocomposite membranes aftercontrolled corona poling was similar to that of native bone, and exhibited highly-stable piezoelectrical properties and concentrated surface electrical potential. These nanocomposite membranes significantly enhanced the adhesion and spreading of BMSCs, which was manifested as increased number and area of mature focal adhesions. Furthermore, the nanocomposite membranes significantly promoted the expression of integrin receptors genes (α1, α5 andβ3), which in turn enhanced osteogenesis of BMSCs, as manifested by upregulated Alkaline Phosphatase (ALP) and Bone Morphogenetic Protein 2 (BMP2) expression levels. Further investigations found that the Focal Adhesion Kinase (FAK)-Extracellular Signal-Regulated Kinase1/2 (ERK 1/2) signaling axis may be involved in the biological process of polarized nanocomposite membrane-induced osteogenesis. This study thus provides useful insights for betterunderstanding of the biological processes by which piezoelectric or ferroelectric biomaterials promote osteogenesis.

On the road to smart biomaterials for bone research: definitions, concepts, advances, and outlook

The demand for biomaterials that promote the repair, replacement, or restoration of hard and soft tissues continues to grow as the population ages. Traditionally, smart biomaterials have been thought as those that respond to stimuli. However, the continuous evolution of the field warrants a fresh look at the concept of smartness of biomaterials. This review presents a redefinition of the term "Smart Biomaterial" and discusses recent advances in and applications of smart biomaterials for hard tissue restoration and regeneration. To clarify the use of the term "smart biomaterials", we propose four degrees of smartness according to the level of interaction of the biomaterials with the bio-environment and the biological/cellular responses they elicit, defining these materials as inert, active, responsive, and autonomous. Then, we present an up-to-date survey of applications of smart biomaterials for hard tissues, based on the materials' responses (external and internal stimuli) and their use as immune-modulatory biomaterials. Finally, we discuss the limitations and obstacles to the translation from basic research (bench) to clinical utilization that is required for the development of clinically relevant applications of these technologies.

Mimicking the electrophysiological microenvironment of bone tissue using electroactive materials to promote its regeneration

The process of bone tissue repair and regeneration is complex and requires a variety of physiological signals, including biochemical, electrical and mechanical signals, which collaborate to ensure functional recovery. The inherent piezoelectric properties of bone tissues can convert mechanical stimulation into electrical effects, which play significant roles in bone maturation, remodeling and reconstruction. Electroactive materials, including conductive materials, piezoelectric materials and electret materials, can simulate the physiological and electrical microenvironment of bone tissue, thereby promoting bone regeneration and reconstruction. In this paper, the structures and performances of different types of electroactive materials and their applications in the field of bone repair and regeneration are reviewed, particularly by providing the results from in vivo evaluations using various animal models. Their advantages and disadvantages as bone repair materials are discussed, and the methods for tuning their performances are also described, with the aim of providing an up-to-date account of the proposed topics.

Hydrogel-Coated Dental Device with Adhesion-Inhibiting and Colony-Suppressing Properties

Bacterial infection is the main cause of implantation failure worldwide, and the importance of antibiotics on medical devices has been undermined because of antibiotic resistance. Antimicrobial hydrogels have emerged as a promising approach to combat infections associated with medical devices and wound healing. However, hydrogel coatings that simultaneously possess both antifouling and antimicrobial attributes are scarce. Herein, we report an antimicrobial hydrogel that incorporates adhesion-inhibiting polyethylene glycol (PEG) and colony-suppressing chitosan (CS) as a dressing to combat bacterial infections. These two polymers have important environmentally benign characteristics including low toxicity, low volatility, and biocompatibility. Although hydrogels containing PEG and CS have been reported for applications in the fields of wound dressing, tissue repair, water purification, drug delivery, and scaffolds for bone regeneration, there still has been no report on the application of CS/PEG hydrogel coatings in dental applications. Herein, this biointerface shows superior activity in early-stage adhesion inhibition (98.8%, 5 h) and displays remarkably long-lasting colony-suppression activity (93.3%, 7 d). Thus, this novel nanomaterial, which has potential as a dual-functional platform with integrated antifouling and antimicrobial functions with excellent biocompatibility, might be used as a safe and effective antimicrobial coating in biomedical device applications.

Advancing Versatile Ferroelectric Materials Toward Biomedical Applications

Ferroelectric materials (FEMs), possessing piezoelectric, pyroelectric, inverse piezoelectric, nonlinear optic, ferroelectric-photovoltaic, and many other properties, are attracting increasing attention in the field of biomedicine in recent years. Because of their versatile ability of interacting with force, heat, electricity, and light to generate electrical, mechanical, and optical signals, FEMs are demonstrating their unique advantages for biosensing, acoustics tweezer, bioimaging, therapeutics, tissue engineering, as well as stimulating biological functions. This review summarizes the current-available FEMs and their state-of-the-art fabrication techniques, as well as provides an overview of FEMs-based applications in the field of biomedicine. Challenges and prospects for future development of FEMs for biomedical applications are also outlined.

Polyvinyl alcohol modified polyvinylidene fluoride-graphene oxide scaffold promotes osteogenic differentiation potential of human induced pluripotent stem cells

Tissue engineering is fast becoming a key approach in bone medicine studies. Designing the ideally desirable combination of stem cells and scaffolds are at the hurt of efforts for producing implantable bone substitutes. Clinical application of stem cells could be associated with serious limitations, and engineering scaffolds that are able to imitate the important features of extracellular matrix is a major area of challenges within the field. In this study, electrospun scaffolds of polyvinylidene fluoride (PVDF), PVDF-graphene oxide (GO), PVDF-polyvinyl alcohol (PVA) and PVDF-PVA-GO were fabricated to study the osteogenic differentiation potential of human induced pluripotent stem cells (iPSCs) while cultured on fabricated scaffolds. Scanning electron microscopy study, viability assay, relative gene expression analysis, immunocytochemistry, alkaline phosphates activity, and calcium content assays confirmed that the osteogenesis rate of hiPSCs cultured on PVDF-PVA-Go is significantly higher than other scaffolds. Here, we showed that the biocompatible, nontoxic, flexible, piezoelectric, highly porous and interconnected three-dimensional structure of electrospun PVDF-PVA-Go scaffold in combination with hiPSCs (as the stem cells with significant advantageous in comparison to other types) makes them a highly promising scaffold-stem cell system for bone remodeling medicine. There was no evidence for the superiority of PVDF-GO or PVDF-PVA scaffold for osteogenesis, compared to each other; however both of them showed better potentials as to PVDF scaffold.

Biomimetic piezoelectric nanocomposite membranes synergistically enhance osteogenesis of deproteinized bovine bone grafts

Purpose: The combination of a bone graft with a barrier membrane is the classic method for guided bone regeneration (GBR) treatment. However, the insufficient osteoinductivity of currently-available barrier membranes and the consequent limited bone regeneration often inhibit the efficacy of bone repair. In this study, we utilized the piezoelectric properties of biomaterials to enhance the osteoinductivity of barrier membranes. Methods: A flexible nanocomposite membrane mimicking the piezoelectric properties of natural bone was utilized as the barrier membrane. Its therapeutic efficacy in repairing critical-sized rabbit mandible defects in combination with xenogenic grafts of deproteinized bovine bone (DBB) was explored. The nanocomposite membranes were fabricated with a homogeneous distribution of piezoelectric BaTiO₃ nanoparticles (BTO NPs) embedded within a poly(vinylidene fluoridetrifluoroethylene) (P(VDF-TrFE)) matrix. Results: The piezoelectric coefficient of the polarized nanocomposite membranes was close to that of human bone. The piezoelectric coefficient of the polarized nanocomposite membranes was highly stable, with more than 90% of the original piezoelectric coefficient (d₃₃) remaining up to 28 days after immersion in culture medium. Compared with commercially-available polytetrafluoroethylene (PTFE) membranes, the polarized BTO/P(VDF-TrFE) nanocomposite membranes exhibited higher osteoinductivity (assessed by immunofluorescence staining for runt-related transcription factor 2 (RUNX-2) expression) and induced significantly earlier neovascularization and complete mature bone-structure formation within the rabbit mandible critical-sized defects after implantation with DBB Bio-Oss® granules. Conclusion: Our findings thus demonstrated that the piezoelectric BTO/P(VDF-TrFE) nanocomposite membranes might be suitable for enhancing the clinical efficacy of GBR.

Biomineralization Forming Process and Bio-inspired Nanomaterials for Biomedical Application: A Review

Biomineralization is a process in which organic matter and inorganic matter combine with each other under the regulation of living organisms. Because of the biomineralization-induced super survivability and retentivity, biomineralization has attracted special attention from biologists, archaeologists, chemists, and materials scientists for its tracer and transformation effect in rock evolution study and nanomaterials synthesis. However, controlling the biomineralization process in vitro as precisely as intricate biology systems still remains a challenge. In this review, the regulating roles of temperature, pH, and organics in biominerals forming process were reviewed. The artificially introducing and utilization of biomineralization, the bio-inspired synthesis of nanomaterials, in biomedical fields was further discussed, mainly in five potential fields: drug and cell-therapy engineering, cancer/tumor target engineering, bone tissue engineering, and other advanced biomedical engineering. This review might help other interdisciplinary researchers to bionic-manufacture biominerals in molecular-level for developing more applications of biomineralization.

EDTA-assisted hydrothermal synthesis of cubic SrF2 particles and their catalytic performance for the pyrolysis of 1-chloro-1,1-difluoroethane to vinylidene fluoride

Uniform, free-standing and cubic SrF₂ microparticles were fabricated by a facile hydrothermal method with EDTA as the chelating agent.

Influence of CNTs on the Crystalline Microstructure and Ferroelectric Behavior of P(VDF-TrFE)

We investigate the effect of carbon nanotubes (CNTs) on the crystalline microstructure and ferroelectric behavior of polyvinylidene fluoride- co-trifluoroethylene (P(VDF-TrFE)). X-ray analysis suggests that CNT can act as a template and direct the chain orientation of P(VDF-TrFE) crystals. In the presence of CNTs, the molecular chain axis ( c axis) of the β-phase crystal is oriented parallel to the long axis of CNTs. Moreover, we find that this templating effect did not cause a polymorph transition. For P(VDF-TrFE)/CNT composites, the crystallinity of P(VDF-TrFE) is slightly decreased. The orientation of the c axis induced by the templating effect of CNTs has a significant impact on the ferroelectric behavior of P(VDF-TrFE). As compared to a pure P(VDF-TrFE) film, the remnant polarization of the P(VDF-TrFE)/CNT composite is enhanced. Correspondingly, the piezoelectric property of the P(VDF-TrFE)/CNT composite shows a significant enhancement.