Co3 O4 Nanowires Capable of Discharging Low Voltage Electricity Showing Potent Antibacterial Activity for Treatment of Bacterial Skin Infection

Novel Hydrogel Adjuvant of Chinese Medicine External Preparations for Accelerated Healing of Deep Soft Tissue Injuries

Traditional Chinese medicine external prescriptions have displayed excellent clinical effects for treating deep soft tissue injuries. However, the effects cannot be fully utilized due to the limitations of their dosage forms and usage methods. It is still a challenge to develop a satisfactory adjuvant of traditional Chinese medicine external prescriptions. Herein, a hydrogel adjuvant was prepared based on gallic acid coupled ε-poly-l-lysine and partially oxidized hyaluronic acid. The resulting adjuvant shows great physicochemical properties, low hemolysis rate (still much less than 5% at 5 mg/mL), excellent antibacterial ability (about 95% at 2 mg/mL), strong antioxidant ability (1.687 ± 0.085 mmol FeSO4/(g hydrogel) at 1 mg/mL), as well as outstanding biocompatibility. A clinically used Chinese medicine external preparation was selected as an example to investigate the effectiveness of the adjuvant in treating deep soft tissue injuries. The results show that the prescription can be evenly dispersed in the adjuvant. Moreover, the introduction of the prescription has not significantly changed these advanced properties of the adjuvant. Importantly, the hydrogel adjuvant significantly improves the effectiveness of the prescription in treating deep soft tissue injuries. This work offers an alternative approach to the development of a new-type adjuvant of Chinese medicine external preparations and also provides a new strategy for the combination of traditional Chinese medicine and hydrogel to treat clinical diseases.

Refining and in-situ growth of polyaniline endows the cellulose fibers with electrical stimulation sterilization

Bacteria and virus infections have posed a great threat to public health and personnel safety. For realizing rapid sterilization of the bacteria and virus, electrical stimulation sterilization was adopted to endow cellulose fibers with instantaneous antibacterial and antiviral properties. In the proposed strategy, the fiber is fluffed by mechanical refining, and then by means of the hydrogen bond between hydroxyl and aniline, the polyaniline (PANI) directionally grows vertically along the fine fibers via in-situ oxidative polymerization. Benefiting from the conductive polyaniline nanorod arrays on the fiber stem, the paper made from PANI modified refined fibers (PANI/BCF/P) exhibited excellent antibacterial and antiviral activity, the inhibition rates against S. aureus, E. coli, and bacteriophage MS2 can up to 100 %, 100 %, and 99.89 %, respectively when a weak voltage (2.5 V) was applied within 20 min. This study provides a feasible path for plant fiber to achieve efficient antibacterial and antiviral activity with electrical stimulation, which is of great significance for the preparation of electroactive antibacterial and antiviral green health products.

Polydopamine-Coated Copper-Doped Co3O4 Nanosheets Rich in Oxygen Vacancy on Titanium and Multimodal Synergistic Antibacterial Study

Medical titanium-based (Ti-based) implants in the human body are prone to infection by pathogenic bacteria, leading to implantation failure. Constructing antibacterial nanocoatings on Ti-based implants is one of the most effective strategies to solve bacterial contamination. However, single antibacterial function was not sufficient to efficiently kill bacteria, and it is necessary to develop multifunctional antibacterial methods. This study modifies medical Ti foils with Cu-doped Co3O4 rich in oxygen vacancies, and improves their biocompatibility by polydopamine (PDA/Cu-Ov-Co3O4). Under near-infrared (NIR) irradiation, nanocoatings can generate •OH and 1O2 due to Cu+ Fenton-like activity and a photodynamic effect of Cu-Ov-Co3O4, and the total reactive oxygen species (ROS) content inside bacteria significantly increases, causing oxidative stress of bacteria. Further experiments prove that the photothermal process enhances the bacterial membrane permeability, allowing the invasion of ROS and metal ions, as well as the protein leakage. Moreover, PDA/Cu-Ov-Co3O4 can downregulate ATP levels and further reduce bacterial metabolic activity after irradiation. This coating exhibits sterilization ability against both Escherichia coli and Staphylococcus aureus with an antibacterial rate of ca. 100%, significantly higher than that of bare medical Ti foils (ca. 0%). Therefore, multifunctional synergistic antibacterial nanocoating will be a promising strategy for preventing bacterial contamination on medical Ti-based implants.

A self-activating electron transfer antibacterial strategy: Co3O4/TiO2 P-N heterojunctions combined with photothermal therapy

Implant-associated infections are significant impediments to successful surgical outcomes, often resulting from persistent bacterial contamination. It has been hypothesized that bacteria can transfer electrons to semiconductors with comparable potential to the biological redox potential (BRP). Building on this concept, we developed an antibiotic-free bactericidal system, Co3O4/TiO2-Ti, capable of achieving real-time and sustainable bactericidal effects. Our study demonstrated that Co3O4/TiO2-Ti, possessing an appropriately set valence band, initiated charge transfer, reactive oxygen species (ROS) production, and membrane damage in adherent Staphylococcus aureus (S. aureus). Notably, in vivo experiments illustrated the remarkable antibacterial activity of Co3O4/TiO2-Ti, while promoting soft-tissue reconstruction and demonstrating excellent cytocompatibility. Transcriptomic analysis further revealed a down-regulation of aerobic respiration-associated genes and an up-regulation of ROS-associated genes in S. aureus in the presence of Co3O4/TiO2-Ti compared to Ti. Kyoto Encyclopedia of Genes and Genomes (KEGG) analysis and gene set enrichment analysis (GSEA) identified alterations in respiratory metabolism, oxidative phosphorylation, and the synthesis of amino acid in S. aureus cultured on Co3O4/TiO2-Ti. Furthermore, when combined with near-infrared (NIR) irradiation and photothermal therapy (PTT), Co3O4/TiO2-Ti eliminated 95.71% of floating and adherent S. aureus in vitro. The findings suggest that this antibiotic-free strategy holds substantial promise in enhancing implant sterilization capabilities, thereby contributing to the prevention and treatment of bacterial infections through bandgap engineering of implants and NIR irradiation.

Facile synthesis of nanoparticles-stacked Co3O4 nanoflakes with catalase-like activity for accelerating wound healing

Delayed wound healing caused by excessive reactive oxygen species (ROS) remains a considerable challenge. In recent years, metal oxide nanozymes have gained significant attention in biomedical research. However, a comprehensive investigation of Co3O4-based nanozymes for enhancing wound healing and tissue regeneration is lacking. This study focuses on developing a facile synthesis method to produce high-stability and cost-effective Co3O4 nanoflakes (NFs) with promising catalase (CAT)-like activity to regulate the oxidative microenvironment and accelerate wound healing. The closely arranged Co3O4 nanoparticles (NPs) within the NFs structure result in a significantly larger surface area, thereby amplifying the enzymatic activity compared to commercially available Co3O4 NPs. Under physiological conditions, it was observed that Co3O4 NFs efficiently break down hydrogen peroxide (H2O2) without generating harmful radicals (·OH). Moreover, they exhibit excellent compatibility with various cells involved in wound healing, promoting fibroblast growth and protecting cells from oxidative stress. In a rat model, Co3O4 NFs facilitate both the hemostatic and proliferative phases of wound healing, consequently accelerating the process. Overall, the promising results of Co3O4 NFs highlight their potential in promoting wound healing and tissue regeneration.

From energy storage to pathogen eradication: unveiling the antibacterial and antiviral capacities of flexible solid-state carbon cloth supercapacitors

With the emergence of deadly viral and bacterial infections, preventing the spread of microorganisms on surfaces has gained ever-increasing importance. This study investigates the potential of solid-state supercapacitors as antibacterial and antiviral devices. We developed a low-cost and flexible carbon cloth supercapacitor (CCSC) with highly efficient antibacterial and antiviral surface properties. The CCSC comprised two parallel layers of carbon cloth (CC) electrodes assembled in a symmetric, electrical double-layer supercapacitor structure that can be charged at low potentials between 1 to 2 V. The optimized CCSC exhibited a capacitance of 4.15 ± 0.3 mF cm-2 at a scan rate of 100 mV s-1, high-rate capability (83% retention of capacitance at 100 mV s-1 compared to its value at 5 mV s-1), and excellent electrochemical stability (97% retention of the initial capacitance after 1000 cycles). Moreover, the CCSC demonstrated outstanding flexibility and retained its full capacitance even when bent at high angles, making it suitable for wearable or flexible devices. Using its stored electrical charge, the charged CCSC disinfects bacteria effectively and neutralizes viruses upon surface contact with the positive and negative electrodes. The charged CCSC device yielded a 6-log CFU reduction of Escherichia coli bacterial inocula and a 5-log PFU reduction of HSV-1 herpes virus. Antibacterial and antiviral carbon cloth supercapacitors represent a promising platform technology for various applications, including electronic textiles and electronic skins, health monitoring or motion sensors, wound dressings, personal protective equipment (e.g., masks) and air filtration systems.

Flexible free-standing antibacterial nanoporous Ag ribbon

The biomedical field has the potential to significantly benefit from the use of flexible free-standing Ag nanostructures due to their outstanding mechanical and antibacterial properties. However, the intricate process of synthesizing these nanostructures, as well as the potential toxicity of nanostructured Ag, pose significant challenges. This study used a facile etching method to synthesize the free-standing nanoporous Ag (NP-Ag) ribbons with a homogeneous and bicontinuous three-dimensional ligament structure. The free-standing NP-Ag ribbons demonstrated stable mechanical performance and excellent flexibility when subjected to various deformation states on artificial fingers. Additionally, the NP-Ag ribbons exhibited remarkable antibacterial capacity with rates of 99.81 ± 0.14% against Escherichia coli, 96.11 ± 1.49% against Staphylococcus aureus, and 95.37 ± 1.24% against methicillin-resistant Staphylococcus aureus. The antibacterial mechanism of NP-Ag is attributed to the rapid release of Ag ions (Ag⁺) in 24 h, causing damage to the bacterial membrane. Moreover, the in vivo results demonstrate that the NP-Ag ribbons provide rapid antibacterial efficacy and are biosafe due to the long-term stable Ag⁺ release of NP-Ag. The development of these free-standing flexible NP-Ag ribbons offers a new avenue for wearable antibacterial applications.

Ultralow Charge Voltage Triggering Exceptional Post-Charging Antibacterial Capability of Co3 O4 /MnOOH Nanoneedles for Skin Infection Treatment

The post-charging antibacterial therapy is highly promising for treatment of Gram-negative bacterial wound infections. However, the therapeutic efficacy of the current electrode materials is yet unsatisfactory due to their low charge storage capacity and limited reactive oxygen species (ROS) yields. Herein, the design of MnOOH decorated Co₃ O₄ nanoneedles (MCO) with exceptional post-charging antibacterial effect against Gram-negative bacteria at a low charge voltage and their implementation as a robust antibacterial electrode for skin wound treatment are reported. Taking advantaging of the increased active sites and enhanced OH^- adsorption capability, the charge storage capacity and ROS production of the MCO electrode are remarkably boosted. As a result, the MCO electrode after charging at an ultralow voltage of 1.4 V gives a 5.49 log and 5.82 log bacterial reduction in Escherichia coli (E. coli) and Pseudomonas aeruginosa (P. aeruginosa) within an incubation time of only 5 min, respectively. More importantly, the antibacterial efficiency of the MCO electrode against multi-drug resistant (MDR) bacteria including Klebsiella pneumoniae (K. pneumoniae) and Acinetobacter baumannii (A. baumannii) also reaches 99.999%. In addition, the MCO electrode exhibits excellent reusability, and the role of extracellular ROS in enhancing post-charging antibacterial activity is also unraveled.

Alginate-Based Cryogels for Combined Chemo/Photothermal Antibacterial Therapy and Rapid Hemostasis

As novel wound dressings, cryogels with rapid hemostatic property and good sterilization effect are urgently desirable for wound healing. To reduce the use of antibiotics, antibacterial photothermal therapy with broad-spectrum bactericidal capacity and non-obvious bacterial resistance has been widely researched. However, photothermal agents usually suffer from poor hemostatic ability. In this research, sodium alginate (SA) and epigallocatechin gallate (EGCG) were non-covalently cross-linked in suit by ferric ions to obtain SA/EGCG/Fe (SEF) cryogels after lyophilization as an antibacterial wound dressing. Next, its photothermal performance was intensively assessed. Moreover, its hemostasis and bactericidal effect were evaluated. First, it displayed extraordinary photothermal ability owing to the formation of Fe³⁺/EGCG-based metal phenolic networks (MPNs) inside the SEF cryogel. Furthermore, in vitro and in vivo assays illustrated that it exhibits rapid hemostatic capacity owing to its high porosity and MPN-mediated cell adhesion capacity. In conclusion, the SEF cryogel manifests satisfactory hemostatic and bactericidal properties. Therefore, it is a promising wound-dressing candidate for clinical applications.

Tiny tots for a big-league in wound repair: Tools for tissue regeneration by nanotechniques of today

Overall, chronic injuries place considerable burden on patients and health systems. The skin injuries are exposed to inflammatory bacteria and hinder the healing process. The skin being the biggest tissue of the whole body ensures protection against microbial invasion, dehydration, and against chemical, thermal, bright radiations and mechanical agents. When injured, the skin loses its defensive purpose and the attack of bacterial types arises with the loss of protein, water, and electrolytes. Improved wound closure therapy helps to restore normal skin function by managing wounds with the help of a suitable skin replacement. According to the type of wound and its healing ability, an appropriate skin replacement system must be identified. Nanofibrous layers because of their permeable structure, their large superficial reach and their similarity with the local extracellular network serve as cutaneous substitution for dealing with deep and superficial injuries. By a diminished microbial load without infestation, scab formation and infiltration of defense cells in the initial phase, acute injuries are usually characterized. Here recovery is related with epithelialization, angiogenesis and relocation of fibroblasts. The wound becomes obstinate when microbial biofilms are developed while the immune system does not manage to eliminate the infection. Increased inflammatory process, lower deep tissue oxygenation, fibrin cuffs, fibroblastic senescence, altered angiogenesis, stalled re-epithelialization and chronic infection have been visualized. Conventional wound mending treatments for the most part falling flat to supply a great clinical result, either basically like wound epithelialization and regulation of fluid loss or practically like histological highlights that decide versatility, strength, affectability, etc. Conventional wound therapies commonly fail to offer a better medical output, like wound epithelialization and regulation of fluid reduction or physiologically like cellular features that determine durability, sensitivity, elasticity, etc. Nanotechnology may be a dependable investigation space for wound-healing treatments through their versatile physicochemical properties. Advancing nano platforms with novel solutions for curing chronicdiabetic wounds are discussed in detail that can guide further research in this sector.