"Charge leakage" at LaMnO3/SrTiO3 interfaces

Robust Tunability and Newly Emerged Q Resonance of Ba0.8Sr0.2TiO3-Based Microwave Capacitors under Gamma Irradiations

The complex resonance of dielectric quality factor Q, combined with a capacitance tunability n higher than 3:1 without any dispersion, was achieved in the voltage-tunable interdigital capacitors (IDCs) based on epitaxial Ba0.8Sr0.2TiO3 ferroelectric thin films across the microwave L (1-2 GHz), S (2-4 GHz), and C (4-8 GHz) bands at room temperature. The resonant Q and n features were driven by the microwave responses of the ferroelectric nanodomains engineered in the films. To promote their application in space radiation environments, the evolutions of Q and n both as functions of frequency f (1-8 GHz) and applied electric field E (0-240 kV/cm) were systematically investigated under a series of gamma-ray irradiations up to 100 kGy. The robust capacitance tunability was accompanied by the emergence of an additional Q resonance at 2.3 GHz in most post-irradiated devices, which is ascribed to extra polar nanoregions of expanded surface lattices associated with oxygen vacancies induced by irradiations.

Engineering Magnetic Anisotropy and Emergent Multidirectional Soft Ferromagnetism in Ultrathin Freestanding LaMnO3 Films

The combination of small coercive fields and weak magnetic anisotropy makes soft ferromagnetic films extremely useful for nanoscale devices that need to easily switch spin directions. However, soft ferromagnets are relatively rare, particularly in ultrathin films with thicknesses of a few nanometers or less. We have synthesized large-area, high-quality, ultrathin freestanding LaMnO₃ films on Si and found unexpected soft ferromagnetism along both the in-plane and out-of-plane directions when the film thickness was reduced to 4 nm. We argue that the vanishing magnetic anisotropy between the two directions is a consequence of two coexisting magnetic easy axes in different atomic layers of the LaMnO₃ film. Spectroscopy measurements reveal a change in Mn valence from 3+ in the film interior to approximately 2+ at the surfaces where considerable hydrogen infiltration occurs due to the water dissolving process. First-principles calculations show that protonation of LaMnO₃ decreases the Mn valence and switches the magnetic easy axis from in-plane to out-of-plane as the Mn valence approaches 2+ from its 3+ bulk value. Our work demonstrates that ultrathin freestanding films can exhibit functional properties that are absent in homogeneous materials, concomitant with their convenient compatibility with Si-based devices.

ABO3 multiferroic perovskite materials for memristive memory and neuromorphic computing

The unique electron spin, transfer, polarization and magnetoelectric coupling characteristics of ABO₃ multiferroic perovskite materials make them promising candidates for application in multifunctional nanoelectronic devices. Reversible ferroelectric polarization, controllable defect concentration and domain wall movement originated from the ABO₃ multiferroic perovskite materials promotes its memristive effect, which further highlights data storage, information processing and neuromorphic computing in diverse artificial intelligence applications. In particular, ion doping, electrode selection, and interface modulation have been demonstrated in ABO₃-based memristive devices for ultrahigh data storage, ultrafast information processing, and efficient neuromorphic computing. These approaches presented today including controlling the dopant in the active layer, altering the oxygen vacancy distribution, modulating the diffusion depth of ions, and constructing the interface-dependent band structure were believed to be efficient methods for obtaining unique resistive switching (RS) behavior for various applications. In this review, internal physical dynamics, preparation technologies, and modulation methods are systemically examined as well as the progress, challenges, and possible solutions are proposed for next generation emerging ABO₃-based memristive application in artificial intelligence.

Emergent Magnetic Phenomenon with Unconventional Structure in Epitaxial Manganate Thin Films

A variety of emergent phenomena are enabled by interface engineering in the complex oxides heterostructures. While extensive attention is attracted to LaMnO3 (LMO) thin films for observing the control of functionalities at its interface with substrate, the nature of the magnetic phases in the thin film is, however, controversial. Here, it is reported that the ferromagnetism in two and five unit cells thick LMO films epitaxially deposited on (001)-SrTiO3 substrates, a ferromagnetic/ferromagnetic coupling in eight and ten unit cells ones, and a striking ferromagnetic/antiferromagnetic pinning effect with apparent positive exchange bias in 15 and 20 unit cells ones are observed. This novel phenomenon in both 15 and 20 unit cells films indicates a coexistence of three magnetic orderings in a single LMO film. The high-resolution scanning transmission electron microscopy suggests a P21/n to Pbnm symmetry transition from interface to surface, with the spatial stratification of MnO6 octahedral morphology, corresponding to different magnetic orderings. These results can shed some new lights on manipulating the functionality of oxides by interface engineering.

Probing Charge Accumulation at SrMnO3/SrTiO3 Heterointerfaces via Advanced Electron Microscopy and Spectroscopy

The last three decades have seen a growing trend toward studying the interfacial phenomena in complex oxide heterostructures. Of particular concern is the charge distribution at interfaces, which is a crucial factor in controlling the interface transport behavior. However, the study of the charge distribution is very challenging due to its small length scale and the intricate structure and chemistry at interfaces. Furthermore, the underlying origin of the interfacial charge distribution has been rarely studied in-depth and is still poorly understood. Here, by a combination of aberration-corrected scanning transmission electron microscopy (STEM) and spectroscopy techniques, we identify the charge accumulation in the SrMnO₃ (SMO) side of SrMnO₃/SrTiO₃ heterointerfaces and find that the charge density attains the maximum of 0.13 ± 0.07 e^-/unit cell (uc) at the first SMO monolayer. Based on quantitative atomic-scale STEM analyses and first-principle calculations, we explore the origin of interfacial charge accumulation in terms of epitaxial strain-favored oxygen vacancies, cationic interdiffusion, interfacial charge transfer, and space-charge effects. This study, therefore, provides a comprehensive description of the charge distribution and related mechanisms at the SMO/STO heterointerfaces, which is beneficial for the functionality manipulation via charge engineering at interfaces.

Long-Range Magnetic Order in Oxide Quantum Wells Hosting Two-Dimensional Electron Gases

To incorporate spintronics functionalities into two-dimensional devices, it is strongly desired to get two-dimensional electron gases (2DEGs) with high spin polarization. Unfortunately, the magnetic characteristics of the typical 2DEG at the LaAlO₃/SrTiO₃ interface are very weak due to the nonmagnetic character of SrTiO₃ and LaAlO₃. While most of the previous works focused on perovskite oxides, here, we extended the exploration for magnetic 2DEG beyond the scope of perovskite combinations, composing 2DEG with SrTiO₃ and NaCl-structured EuO that owns a large saturation magnetization and a fairly high Curie temperature. We obtained the 2DEGs that show long-range magnetic order and thus unusual behaviors marked by isotropic butterfly shaped magnetoresistance and remarkable anomalous Hall effect. We found evidence for the presence of more conductive domain walls than elsewhere in the oxide layer where the 2DEG resides. More than that, a relation between interfacial magnetism and carrier density is established. On this basis, the intermediate magnetic states between short-range and long-range ordered states can be achieved. The present work provides guidance for the design of high-performance magnetic 2DEGs.

Seeking large Seebeck effects in LaX(X = Mn and Co)O3/SrTiO3 superlattices by exploiting high spin-polarized effects

SrTiO3-based transition-metal oxide heterostructures with superconducting, ferromagnetic, ferroelectric, and ferroelastic properties exhibit high application potential in the fields of energy storage, energy conversion, and spintronic devices. Meanwhile, high effective (charge)-Seebeck coefficient materials composed of a ferromagnetic layer and SrTiO3 insulator layer have been achieved but we still have blocks to pursuing high spin-Seebeck coefficient materials. Here, we use first-principles calculations combined with spin-resolved Boltzmann transport theory to investigate the spin- and effective-Seebeck coefficients in the LaX(X = Mn and Co)O3/SrTiO3 superlattice. Compared with the LaMnO3/SrTiO3 superlattice, LaCoO3/SrTiO3 with ferromagnetic ordering has high spin polarization, relatively low valence valley degeneracy but high effective mass. Utilizing these characteristics, the maximum spin-Seebeck coefficient of LaMnO3/SrTiO3 is -152 μV K-1 at 450 K along the cross-plane direction, while LaCoO3/SrTiO3 reaches -247 μV K-1 under the same conditions. Interestingly, the spin- and effective-Seebeck coefficients are amazingly consistent with each other below 200 K, which indicates that one spin channel (spin-up or spin-down) dominates the carrier transport, and the other one (spin-down or spin-up) is filtered out. These characteristics are mainly associated with the magnetic MnO2/CoO2 layers with distinct dxy and dz2 orbitals near the Fermi level. Our results clarify the relationship of spin- and effective-Seebeck coefficients and indicate that SrTiO3-based transition metal oxide heterointerfaces are a key candidate for spin caloritronics.

Ferroelectric Polarization-Modulated Interfacial Fine Structures Involving Two-Dimensional Electron Gases in Pb(Zr,Ti)O3/LaAlO3/SrTiO3 Heterostructures

Interfacial fine structures of bare LaAlO₃/SrTiO₃ (LAO/STO) heterostructures are compared with those of LAO/STO heterostructures capped with upward-polarized Pb(Zr_0.1,Ti_0.9)O₃ (PZT_up) or downward-polarized Pb(Zr_0.5,Ti_0.5)O₃ (PZT_down) overlayers by aberration-corrected scanning transmission electron microscopy experiments. By combining the acquired electron energy-loss spectroscopy mapping, we are able to directly observe electron transfer from Ti⁴⁺ to Ti³⁺ and ionic displacements at the interface of bare LAO/STO and PZT_down/LAO/STO heterostructure unit cell by unit cell. No evidence of Ti³⁺ is observed at the interface of the PZT_up/LAO/STO samples. Furthermore, the confinement of the two-dimensional electron gas (2DEG) at the interface is determined by atomic-column spatial resolution. Compared with the bare LAO/STO interface, the 2DEG density at the LAO/STO interface is enhanced or depressed by the PZT_down or PZT_up overlayer, respectively. Our microscopy studies shed light on the mechanism of ferroelectric modulation of interfacial transport at polar/nonpolar oxide heterointerfaces, which may facilitate applications of these materials as nonvolatile memory.

Tuning Perpendicular Magnetic Anisotropy by Oxygen Octahedral Rotations in (La_{1-x}Sr_{x}MnO_{3})/(SrIrO_{3}) Superlattices

Perpendicular magnetic anisotropy (PMA) plays a critical role in the development of spintronics, thereby demanding new strategies to control PMA. Here we demonstrate a conceptually new type of interface induced PMA that is controlled by oxygen octahedral rotation. In superlattices comprised of La_{1-x}Sr_{x}MnO_{3} and SrIrO_{3}, we find that all superlattices (0≤x≤1) exhibit ferromagnetism despite the fact that La_{1-x}Sr_{x}MnO_{3} is antiferromagnetic for x>0.5. PMA as high as 4×10^{6}  erg/cm^{3} is observed by increasing x and attributed to a decrease of oxygen octahedral rotation at interfaces. We also demonstrate that oxygen octahedral deformation cannot explain the trend in PMA. These results reveal a new degree of freedom to control PMA, enabling discovery of emergent magnetic textures and topological phenomena.

Manipulating magnetoelectric properties by interfacial coupling in La0.3Sr0.7MnO3/Ba0.7Sr0.3TiO3 superlattices

Artificial superlattices constructed with ferromagnetic La_0.7Sr_0.3MnO₃ layer and ferroelectric Ba_0.7Sr_0.3TiO₃ layer were designed and fabricated on SrTiO₃ substrates. An epitaxial growth with sharp interfaces between La_0.7Sr_0.3MnO₃ and Ba_0.7Sr_0.3TiO₃ layers was confirmed by scanning transmission electron microscopy and x-ray diffraction. An unambiguous charge transfer involving an electron transferring from the La_0.7Sr_0.3MnO₃ layers to Ba_0.7Sr_0.3TiO₃ layers (Mn³⁺→Mn⁴⁺; Ti⁴⁺→Ti³⁺) across the interface were resolved by electron energy loss spectra analysis. These observations are attributed to the possible modification in the stereochemistry of the Ti and Mn ions in the interfacial region. The out-of-plane lattice parameter, Curie temperature, and magnetoresistance are strongly affected by the thicknesses of the La_0.7Sr_0.3MnO₃ and Ba_0.7Sr_0.3TiO₃ layers. Huge magnetoresistance subsisting to low temperature was also observed in the La_0.7Sr_0.3MnO₃/Ba_0.7Sr_0.3TiO₃ superlattices. All spectral changes identified at a nanometer scale and their potential effect on the degradation of magnetic and transport properties at a macroscopic level. These findings highlight the importance of dependence on sublayer thickness, illustrating the high degree of tenability in these artificially low-dimensional oxide materials.

Resonant electron tunnelling assisted by charged domain walls in multiferroic tunnel junctions

The peculiar features of domain walls observed in ferroelectrics make them promising active elements for next-generation non-volatile memories, logic gates and energy-harvesting devices. Although extensive research activity has been devoted recently to making full use of this technological potential, concrete realizations of working nanodevices exploiting these functional properties are yet to be demonstrated. Here, we fabricate a multiferroic tunnel junction based on ferromagnetic La_0.7Sr_0.3MnO₃ electrodes separated by an ultrathin ferroelectric BaTiO₃ tunnel barrier, where a head-to-head domain wall is constrained. An electron gas stabilized by oxygen vacancies is confined within the domain wall, displaying discrete quantum-well energy levels. These states assist resonant electron tunnelling processes across the barrier, leading to strong quantum oscillations of the electrical conductance.

Structural and Magnetic Properties of LaCoO3/SrTiO3 Multilayers

Structural and magnetic properties of the LaCoO3/SrTiO3 (LCO/STO) multilayers (MLs) with a fixed STO layer of 4 nm but varied LCO layer thicknesses have been systematically studied. The MLs grown on Sr0.7La0.3Al0.65Ta0.35O3 (LSAT) and SrTiO3 (STO) exhibit the in-plane lattice constant of the substrates, but those on LaAlO3 (LAO) show the in-plane lattice constant between those of the first two kinds of MLs. Compared with the LCO single layer (SL), the magnetic order of the MLs is significantly enhanced, as demonstrated by a very slow decrease, which is fast for the SL, of the Curie temperature and the saturation magnetization as the LCO layer thickness decreases. For example, clear ferromagnetic order is observed in the ML with the LCO layer of ∼1.5 nm, whereas it vanishes below ∼6 nm for the LCO SL. This result is consistent with the observation that the dark stripes, which are believed to be closely related to the magnetic order, remain clear in the MLs while they are vague in the corresponding LCO SL. The present work suggests a novel route to tune the magnetism of perovskite oxide films.

Strain-induced Curie temperature variation in La0.9Sr0.1MnO3thin films

In this paper, La_0.9Sr_0.1MnO₃thin films were grown epitaxially on SrTiO₃, LaAlO₃and MgO substrates, and the strain effects on their structural, electrical and magnetic properties were investigated.

Trends in (LaMnO3)n/(SrTiO3)m superlattices with varying layer thicknesses

We investigate the thickness dependence of the structural, electronic, and magnetic properties of (LaMnO₃)_n/(SrTiO₃)_m (n, m = 2, 4, 6, 8) superlattices using density functional theory. The electronic structure turns out to be highly sensitive to the onsite Coulomb interaction. In contrast to bulk SrTiO₃, strongly distorted O octahedra are observed in the SrTiO₃ layers with a systematic off centering of the Ti atoms. The systems favour ferromagnetic spin ordering rather than the antiferromagnetic spin ordering of bulk LaMnO₃ and all show half-metallicity, while a systematic reduction of the minority spin band gaps as a function of the LaMnO₃ and SrTiO₃ layer thicknesses originates from modifications of the Ti d_xy states.

Intrinsic interfacial phenomena in manganite heterostructures

We review recent advances in our understanding of interfacial phenomena that emerge when dissimilar materials are brought together at atomically sharp and coherent interfaces. In particular, we focus on phenomena that are intrinsic to the interface and review recent work carried out on perovskite manganites interfaces, a class of complex oxides whose rich electronic properties have proven to be a useful playground for the discovery and prediction of novel phenomena.

Enhanced spin-orbit coupling and charge carrier density suppression in LaAl1-xCrxO3/SrTiO3 hetero-interfaces

We report a gradual suppression of the two-dimensional electron gas (2DEG) at the LaAlO(3)/SrTiO(3) interface on substitution of chromium at the Al sites. The sheet carrier density at the interface (n□) drops monotonically from ∼2.2 × 10(14) cm(-2) to ∼2.5 × 10(13) cm(-2) on replacing ≈60% of the Al sites by Cr and the sheet resistance (R□) exceeds the quantum limit for localization (h/2e(2)) in the concentrating range 40-60% of Cr. The samples with Cr ⩽40% show a distinct minimum (T(m)) in metallic R□(T) whose position shifts to higher temperatures on increasing the substitution. Distinct signatures of Rashba spin-orbit interaction (SOI) induced magnetoresistance (MR) are seen in R□ measured in out of plane field (H⊥) geometry at T ⩽ 8 K. Analysis of these data in the framework of Maekawa-Fukuyama theory allows extraction of the SOI critical field (H(SO)) and time scale (τ(SO)) whose evolution with Cr concentration is similar as with the increasing negative gate voltage in LAO/STO interface. The MR in the temperature range 8 K ⩽ T ⩽ T(m) is quadratic in the field with a +ve sign for H⊥ and -ve sign for H∥. The behaviour of H∥ MR is consistent with Kondo theory which in the present case is renormalized by the strong Rashba SOI at T < 8 K.

Learning from nature: binary cooperative complementary nanomaterials

In this Review, nature-inspired binary cooperative complementary nanomaterials (BCCNMs), consisting of two components with entirely opposite physiochemical properties at the nanoscale, are presented as a novel concept for the building of promising materials. Once the distance between the two nanoscopic components is comparable to the characteristic length of some physical interactions, the cooperation between these complementary building blocks becomes dominant and endows the macroscopic materials with novel and superior properties. The first implementation of the BCCNMs is the design of bio-inspired smart materials with superwettability and their reversible switching between different wetting states in response to various kinds of external stimuli. Coincidentally, recent studies on other types of functional nanomaterials contribute more examples to support the idea of BCCNMs, which suggests a potential yet comprehensive range of future applications in both materials science and engineering.

Signatures of a two-dimensional ferromagnetic electron gas at the La0.7Sr0.3MnO3/SrTiO3 interface arising from orbital reconstruction

The magnetoresistance of La0.7Sr0.3MnO3/SrTiO3 superlattices with magnetic field rotating out-of-plane shows unexpected peaks for in-plane fields. Resistivity calculations with spin-orbit coupling reveal that orbital reconstruction at the manganite interface leads to a 2D ferromagnetic electron gas coupled antiparallel to the manganite "bulk". These orbital and magnetic reconstructions are supported by X-ray linear dichroism and ab initio calculations.

Correlating interfacial octahedral rotations with magnetism in (LaMnO3+δ)N/(SrTiO3)N superlattices

Lattice distortion due to oxygen octahedral rotations have a significant role in mediating the magnetism in oxides, and recently attracts a lot of interests in the study of complex oxides interface. However, the direct experimental evidence for the interrelation between octahedral rotation and magnetism at interface is scarce. Here we demonstrate that interfacial octahedral rotation are closely linked to the strongly modified ferromagnetism in (LaMnO3+δ)N/(SrTiO3)N superlattices. The maximized ferromagnetic moment in the N=6 superlattice is accompanied by a metastable structure (space group Imcm) featuring minimal octahedral rotations (a(-)a(-)c(-), α~4.2°, γ~0.5°). Quenched ferromagnetism for N<4 superlattices is correlated to a substantially enhanced c axis octahedral rotation (a(-)a(-)c(-), α~3.8°, γ~8° for N=2). Monte-Carlo simulation based on double-exchange model qualitatively reproduces the experimental observation, confirming the correlation between octahedral rotation and magnetism. Our study demonstrates that engineering superlattices with controllable interfacial structures can be a feasible new route in realizing functional magnetic materials.

Effects of surface defects on two-dimensional electron gas at NdAlO3/SrTiO3 interface

Density functional theory calculations of NdAlO₃/SrTiO₃ heterostructure show that two-dimensional electron gas (2-DEG) is produced at the interface with a built-in potential of ~0.3 eV per unit cell. The effects of surface defects on the phase stability and electric field of 2-DEG have been investigated. It is found that oxygen vacancy is easily to form on the NdAlO₃(001) surface, with a low threshold displacement energy and a low formation energy. This point defect results in surface reconstruction and the formation of a zigzag -Al-O-Al- chain, which quenches the built-in potential and enhances the carrier density significantly. These results will provide fundamental insights into understanding how surface defects influence the electronic behavior of 2-DEG and tuning their electronic properties through surface modification.

Oxygen octahedral distortions in LaMO3/SrTiO3 superlattices

In this work we study the interfaces between the Mott insulator LaMnO3 (LMO) and the band insulator SrTiO3 (STO) in epitaxially grown superlattices with different thickness ratios and different transport and magnetic behaviors. Using atomic resolution electron energy-loss spectral imaging, we analyze simultaneously the structural and chemical properties of these interfaces. We find changes in the oxygen octahedral tilts within the LaMnO3 layers when the thickness ratio between the manganite and the titanate layers is varied. Superlattices with thick LMO and ultrathin STO layers present unexpected octahedral tilts in the STO, along with a small amount of oxygen vacancies. On the other hand, thick STO layers exhibit undistorted octahedra while the LMO layers present reduced O octahedral distortions near the interfaces. These findings are discussed in view of the transport and magnetic differences found in previous studies.

Visualizing the interfacial evolution from charge compensation to metallic screening across the manganite metal-insulator transition

Electronic changes at polar interfaces between transition metal oxides offer the tantalizing possibility to stabilize novel ground states yet can also cause unintended reconstructions in devices. The nature of these interfacial reconstructions should be qualitatively different for metallic and insulating films as the electrostatic boundary conditions and compensation mechanisms are distinct. Here we directly quantify with atomic-resolution the charge distribution for manganite-titanate interfaces traversing the metal-insulator transition. By measuring the concentration and valence of the cations, we find an intrinsic interfacial electronic reconstruction in the insulating films. The total charge observed for the insulating manganite films quantitatively agrees with that needed to cancel the polar catastrophe. As the manganite becomes metallic with increased hole doping, the total charge build-up and its spatial range drop substantially. Direct quantification of the intrinsic charge transfer and spatial width should lay the framework for devices harnessing these unique electronic phases.

Chemical analysis at atomic resolution of isolated extended defects in an oxygen-deficient, complex manganese perovskite

A general approach to the structural and analytical characterization of complex bulk oxides that exploits the advantage of the atomic spatial resolution and the analytical capability of aberration-corrected microscopy is described. The combined use of imaging and spectroscopic techniques becomes necessary to the complete characterization of the oxygen-deficient colossal magnetoresistant La(0.56)Sr(0.44)MnO(2.5)-related perovskite. In this compound, the formation of isolated (La/Sr)O and MnO rock-salt-type planar defects are identified from atomically resolved High Angle Annular Dark Field (HAADF) images. The location of the oxygen atomic columns from Annular Bright Field (ABF) images indicates edge-sharing MnO6 octahedra in the MnO planes and the study performed by Electron Energy Loss Spectroscopy (EELS) reveals different Mn oxidation states derived from the corner- or edge-sharing MnO6 octahedra environment.

Origin of interface magnetism in BiMnO3/SrTiO3 and LaAlO3/SrTiO3 heterostructures

Possible ferromagnetism induced in otherwise nonmagnetic materials has been motivating intense research in complex oxide heterostructures. Here we show that a confined magnetism is realized at the interface between SrTiO3 and two insulating polar oxides, BiMnO3 and LaAlO3. By using polarization dependent x-ray absorption spectroscopy, we find that in both cases the magnetism can be stabilized by a negative exchange interaction between the electrons transferred to the interface and local magnetic moments. These local magnetic moments are associated with magnetic Ti3+ ions at the interface itself for LaAlO3/SrTiO3 and to Mn3+ ions in the overlayer for BiMnO3/SrTiO3. In LaAlO3/SrTiO3 the induced magnetism is quenched by annealing in oxygen, suggesting a decisive role of oxygen vacancies in this phenomenon.

Surface octahedral distortions and atomic design of perovskite interfaces

Atomic engineering of perovskite films and interfaces is significantly improved by in situ optimization of reflection high-energy electron diffraction (RHEED) features resulting from surface BO₆ octahedral rotations seen during molecular-beam epitaxy growth. This approach yields Sr-doped manganite films across the phase diagram with magnetotransport properties that are, for the first time, identical to bulk single crystals. Careful structural analysis of manganite/titanate interfaces shows that cation intermixing and unit cell dilations are eliminated, while BO₆ rotations and Jahn-Teller-type elongations are nearly completely suppressed at the interface.

Chemical mapping and quantification at the atomic scale by scanning transmission electron microscopy

With innovative modern material-growth methods, a broad spectrum of fascinating materials with reduced dimensions-ranging from single-atom catalysts, nanoplasmonic and nanophotonic materials to two-dimensional heterostructural interfaces-is continually emerging and extending the new frontiers of materials research. A persistent central challenge in this grand scientific context has been the detailed characterization of the individual objects in these materials with the highest spatial resolution, a problem prompting the need for experimental techniques that integrate both microscopic and spectroscopic capabilities. To date, several representative microscopy-spectroscopy combinations have become available, such as scanning tunneling microscopy, tip-enhanced scanning optical microscopy, atom probe tomography, scanning transmission X-ray microscopy, and scanning transmission electron microscopy (STEM). Among these tools, STEM boasts unique chemical and electronic sensitivity at unparalleled resolution. In this Perspective, we elucidate the advances in STEM and chemical mapping applications at the atomic scale by energy-dispersive X-ray spectroscopy and electron energy loss spectroscopy with a focus on the ultimate challenge of chemical quantification with atomic accuracy.

Electron doping by charge transfer at LaFeO3/Sm2CuO4 epitaxial interfaces

Using X-ray absorption spectroscopy and electron energy loss spectroscopy with atomic-scale spatial resolution, experimental evidence for charge transfer at the interface between the Mott insulators Sm2 CuO4 and LaFeO3 is obtained. As a consequence of the charge transfer, the Sm2 CuO4 is doped with electrons and thus epitaxial Sm2 CuO4 /LaFeO3 heterostructures become metallic.

Statistical consequences of applying a PCA noise filter on EELS spectrum images

Principal component analysis (PCA) noise filtering is a popular method to remove noise from experimental electron energy loss (EELS) spectrum images. Here, we investigate the statistical behaviour of this method by applying it on a simulated data set with realistic noise levels. This phantom data set provides access to the true values contained in the data set as well as to many different realizations of the noise. Using least squares fitting and parameter estimation theory, we demonstrate that even though the precision on the estimated parameters can be better as the Cramér-Rao lower bound, a significant bias is introduced which can alter the conclusions drawn from experimental data sets. The origin of this bias is in the incorrect retrieval of the principal loadings for noisy data. Using an expression for the bias and precision of the singular values from literature, we present an evaluation criterion for these singular values based on the noise level and the amount of information present in the data set. This criterion can help to judge when to avoid PCA noise filtering in practical situations. Further we show that constructing elemental maps of PCA noise filtered data using the background subtraction method, does not guarantee an increase in the signal to noise ratio due to correlation of the spectral data as a result of the filtering process.

Electric field control of magnetism in multiferroic heterostructures

We review the recent developments in the electric field control of magnetism in multiferroic heterostructures, which consist of heterogeneous materials systems where a magnetoelectric coupling is engineered between magnetic and ferroelectric components. The magnetoelectric coupling in these composite systems is interfacial in origin, and can arise from elastic strain, charge, and exchange bias interactions, with different characteristic responses and functionalities. Moreover, charge transport phenomena in multiferroic heterostructures, where both magnetic and ferroelectric order parameters are used to control charge transport, suggest new possibilities to control the conduction paths of the electron spin, with potential for device applications.

Electron transfer and ionic displacements at the origin of the 2D electron gas at the LAO/STO interface: direct measurements with atomic-column spatial resolution

Using state-of-the-art, aberration-corrected scanning transmission electron microscopy and electron energy loss spectroscopy with atomic-scale spatial resolution, experimental evidence for an intrinsic electronic reconstruction at the LAO/STO interface is shown. Simultaneous measurements of interfacial electron density and system polarization are crucial for establishing the highly debated origin of the 2D electron gas.

Electronic and magnetic reconstructions in La0.7Sr0.3MnO3/SrTiO3 heterostructures: a case of enhanced interlayer coupling controlled by the interface

We report on the magnetic coupling of La0.7Sr0.3MnO3 layers through SrTiO3 spacers in La0.7Sr0.3MnO3/SrTiO3 epitaxial heterostructures. Combined aberration-corrected microscopy and electron-energy-loss spectroscopy evidence charge transfer to the empty conduction band of the titanate. Ti d electrons interact via superexchange with Mn, giving rise to a Ti magnetic moment as demonstrated by x-ray magnetic circular dichroism. This induced magnetic moment in the SrTiO3 controls the bulk magnetic and transport properties of the superlattices when the titanate layer thickness is below 1 nm.