Single-molecule spectroscopy for plastic electronics: materials analysis from the bottom-up

Relating reorganization energies, exciton diffusion length and non-radiative recombination to the room temperature UV-vis absorption spectra of NF-SMA

Understanding excited-state reorganization energies, exciton diffusion lengths and non-radiative (NR) recombination, and the overall optoelectronic responses of nonfullerene small molecule acceptors (NF-SMAs) is important in order to rationally design new materials with controlled properties. While the effects of structural modifications on the optical gaps and electron affinities of NF-SMAs have been studied extensively, analyses of their absorption spectra that carefully characterize electronic and vibrational contributions that allow comparisons of reorganization energies and their implications for exciton diffusion lengths and NR recombination have yet to be reported. Here, we study the room temperature absorption spectra of three structural classes of NF-SMAs in dilute solutions through multiparameter Franck Condon (MFC) analyses and density functional theory (DFT) calculations. We show that the absorption spectra of these NF-SMAs can be categorized based on molecular structure-spectra correlation. The absorption spectra of curved, Y6-like structures can be described using an MFC model with two electronic transitions and two effective vibrational modes. The results of MFC/DFT analyses reveal that Y6 exhibits the smallest intra-molecular reorganization energy among the materials studied. Linear ITIC-like molecular structures reveal larger reorganization energies and reduced conformational uniformity compared to Y6. Meanwhile structures such as IDTBR and IEICO, which have an extra π-conjugated moiety between the donor and acceptor moieties, have large excited-state reorganization energies and low degrees of conformational uniformity. Since the intra-molecular reorganization energy is correlated with exciton diffusion length and nonradiative voltage losses (ΔV_nr), our results highlight the power of RT absorption spectroscopy and DFT calculations as simple tools to designing improved OSCs materials with small reorganization energies, small ΔV_nr, large exciton diffusion length and low energetic disorder (due to a strongly dominant conformation).

Submolecular Resolution Imaging of P3HT:PCBM Nanostructured Films by Atomic Force Microscopy: Implications for Organic Solar Cells

The efficiency of organic bulk-heterojunction (BHJ) solar cells depends greatly on both the bulk and surface structure of the nanostructured bicontinuous interpenetrating network of materials, known as the active layer. The morphology of the top layer of a coated film is often resolved at the scale of a few nanometers, but fine details of the domains and the order within them are more difficult to identify. Here, we report a high-resolution atomic force microscopy (AFM) investigation of various stoichiometries of the well-studied poly(3-hexylthiophene):[6,6]-phenyl C₆₁ butyric acid methyl ester (P3HT:PCBM) active layer mixture. Images of the surface were obtained using AC-mode AFM exciting higher-order resonance frequencies of a standard silicon probe, a promising technique for acquiring real-space images of organic-based thin films with nanoscale and even submolecular resolution. We provide firm evidence of the nanoscale organization of the P3HT polymer and of the P3HT:PCBM stoichiometric mixtures at the surface-air interface of the BHJ architecture. Our study shows the characteristic periodicity of the regioregular P3HT identified in the nanoscale domain areas with submolecular resolution. Such areas are then distorted in place when adding different quantities of PCBM forming stoichiometric mixtures. When the samples were exposed to ambient light, the morphologies were very different, and submolecular resolution was not achieved. This approach is shown to provide a precise view of the active layer's nanostructure and will be useful for studies of other materials as a function of various parameters, with particular attention to the role of the acceptor in tuning morphology for understanding optimum performance in organic photovoltaic devices.

State-of-the-art developments in carbon quantum dots (CQDs): Photo-catalysis, bio-imaging, and bio-sensing applications

Carbon quantum dots (CQDs), the intensifying nanostructured form of carbon material, have exhibited incredible impetus in several research fields such as bio-imaging, bio-sensing, drug delivery systems, optoelectronics, photovoltaics, and photocatalysis, thanks to their exceptional properties. The CQDs show extensive photonic and electronic properties, as well as their light-collecting, tunable photoluminescence, remarkable up-converted photoluminescence, and photo-induced transfer of electrons were widely studied. These properties have great advantages in a variety of visible-light-induced catalytic applications for the purpose of fully utilizing the energy from the solar spectrum. The major purpose of this review is to validate current improvements in the fabrication of CQDs, characteristics, and visible-light-induced catalytic applications, with a focus on CQDs multiple functions in photo-redox processes. We also examine the problems and future directions of CQD-based nanostructured materials in this growing research field, with an eye toward establishing a decisive role for CQDs in photocatalysis, bio-imaging, and bio-sensing applications that are enormously effective and stable over time. In the end, a look forward to future developments is presented, with a view to overcoming challenges and encouraging further research into this promising field.

Vibrations Responsible for Luminescence from HJ-Aggregates of Conjugated Polymers Identified by Cryogenic Spectroscopy of Single Nanoparticles

A single polymer chain can be thought of as a covalently bound J-aggregate, where the microscopic transition-dipole moments line up to emit in phase. Packing polymer chains into a bulk film can result in the opposite effect, inducing H-type coupling between chains. Cofacial transition-dipole moments oscillate out of phase, canceling each other out, so that the lowest-energy excited state turns dark. H-aggregates of conjugated polymers can, in principle, be coaxed into emitting light by mixing purely electronic and vibronic transitions. However, it is challenging to characterize this electron-phonon coupling experimentally. In a bulk film, many different conformations exist with varying degrees of intrachain J-type and interchain H-type coupling strengths, giving rise to broad and featureless aggregate absorption and emission spectra. Even if single nanoparticles consisting of only a few single chains are grown in a controlled fashion, the luminescence spectra remain broad, owing to the underlying molecular dynamics and structural heterogeneity at room temperature. At cryogenic temperatures, emission from H-type aggregates should be suppressed because, in the absence of thermal energy, internal conversion drives the aggregate to the lowest-energy dark state. At the same time, electronic and vibronic transitions narrow substantially, facilitating the attribution of spectral signatures to distinct vibrational modes. We demonstrate how to distinguish signatures of interchain H-type aggregate species from those of intramolecular J-type coupling. Whereas all dominant vibronic modes revealed in the photoluminescence (PL) and surface-enhanced resonance Raman scattering spectra of a single chromophore within a single polymer chain are identified in the J-type aggregate luminescence spectra, they are not all present at once in the H-type spectra. Universal spectral features are found for the luminescence from strongly HJ-coupled chains, clearly resolving the vibrations responsible for the nonadiabatic excited-state molecular dynamics that enable light emission. We discuss the possible combinations of vibrational modes responsible for H-type aggregate PL and demonstrate that only one, mainly the lowest energy one, of the three dominant vibrational modes contributes to the 0-1 transition, whereas combinations of all three are found in the 0-2 transition. From this analysis, we can distinguish between energy shifts due to either J-type intrachain coupling or H-type interchain interactions, offering a means to directly discriminate between structural and energetic disorder.

Universal Existence of Localized Single-Photon Emitters in the Perovskite Film of All-Inorganic CsPbBr3 Microcrystals

All-inorganic halide perovskites have drawn a lot of research attention very recently owing to their potential solution to the instability issue currently faced by the organic-inorganic counterparts. Meanwhile, the halide perovskites in a solid film are manifested as microscale morphologies whose functionalities are unavoidably affected by the interior or exterior presence of various nanoscale entities. Here all-inorganic solid films are fabricated with varying densities of single CsPbBr₃ microcrystals, showing that very sharp photoluminescence peaks can be universally observed at 4 K with the linewidths being as narrow as hundreds of μeV. The single-photon emission nature is confirmed for such a photoluminescence peak, whose intensity is completely quenched above ≈30 K to suggest its possible origin from a low potential-energy region of the single microcrystal. The discovery of such a novel emitting species in halide perovskites, with the enriched structure-property relationship, will surely impart significant influences on the advancement of relevant optoelectronic devices and quantum-light sources.

Fluorescence and Electroluminescence of J-Aggregated Polythiophene Monolayers on Hexagonal Boron Nitride

The photophysics of a semiconducting polymer is manipulated through molecular self-assembly on an insulating surface. Adsorption of polythiophene (PT) monolayers on hexagonal boron nitride (hBN) leads to a structurally induced planarization and a rebalancing of inter- and intrachain excitonic coupling. This conformational control results in a dominant 0-0 photoluminescence peak and a reduced Huang-Rhys factor, characteristic of J-type aggregates, and optical properties which are significantly different to both PT thin films and single polymer strands. Adsorption on hBN also provides a route to explore electroluminescence from PT monolayers though incorporation into hybrid van der Waals heterostructures whereby the polymer monolayer is embedded within a hBN tunnel diode. In these structures we observe up-converted singlet electroluminescence from the PT monolayer, with an excitation mechanism based upon inelastic electron scattering. We argue that surface adsorption provides a methodology for the study of fundamental optoelectronic properties of technologically relevant polymers.

Effect of Thermal Annealing on Conformation of MEH-PPV Chains in Polymer Matrix: Coexistence of H- and J-Aggregates

In diluted solid solution using poly(2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene) (MEH-PPV) and polymethyl methacrylate (PMMA) or polystyrene (PS), both aggregated and extended conformations could be formed according to the weight ratio. Aggregated conformation in as-cast MEH-PPV/PMMA film presented a J-aggregate-like photoluminescence (PL) emission. After annealing at 160 °C, its PL showed characteristics of both J- and H-aggregates at the same time; however, extended conformation showed an oligomer-like emission, which was not sensitive to either measurement temperature or annealing temperature. Thus, the conformation transition between aggregated and extended is unlikely to happen in MEH-PPV/PMMA blends during thermal annealing. On the contrary, in MEH-PPV/PS blends, extended conformation dominated in as-cast film with oligomer-like emissions; after annealing at 160 °C, both J- and H- aggregate-like PL emissions were observed, indicating the conformation transitioned from extended to aggregated. Therefore, our work may suggest a new method to manipulate photophysical properties of conjugated polymers by combining appropriate host matrix and thermal annealing processes.

Control of Intrachain Morphology in the Formation of Polyfluorene Aggregates on the Single-Molecule Level

Controlling the morphology of π-conjugated polymers for organic optoelectronic devices has long been a goal in the field of materials science. Since the morphology of a polymer chain is closely intertwined with its photophysical properties, it is desirable to be able to change the arrangement of the polymers at will. We investigate the π-conjugated polymer poly(9,9-dioctylfluorene) (PFO), which can exist in three distinctly different structural phases: the α-, β-, and γ-phase. Every phase has a different chain structure and a unique photoluminescence (PL) spectrum. Due to its unique properties and the pronounced spectral structure-property relations, PFO can be used as a model system to study the morphology of π-conjugated polymers. To avoid ensemble averaging, we examine the PL spectrum of single PFO chains embedded in a non-fluorescent matrix. With single-molecule spectroscopy the structural phase of every single chain can be determined, and changes can be monitored very easily. To manipulate the morphology, solvent vapor annealing (SVA) was applied, which leads to a diffusion of the polymer chains in the matrix. The β- and γ-phases appear during the self-assembly of single α-phase PFO chains into mesoscopic aggregates. The extent of β- and γ-phase formation is directed by the solvent-swelling protocol used for aggregation. Aggregation unequivocally promotes formation of the more planar β- and γ-phases. Once these lower-energy more ordered structural phases are formed, SVA cannot return the polymer chain to the less ordered phase by aggregate swelling.

Single-particle electroluminescence of CsPbBr3 perovskite nanocrystals reveals particle-selective recombination and blinking as key efficiency factors

Halide perovskites nanocrystals (NCs) are being explored as promising materials for optoelectronic applications, such as light-emitting devices or lasers. However, electroluminescence devices prepared from such NCs have long suffered from low efficiency and there has been no systematic study on the nanoscale origin of the poor efficiencies. Here, we use single-particle spectroscopy to compare electroluminescence and photoluminescence on the level of individual NCs of the perovskite CsPbBr₃. The NCs form aggregates in a conducting matrix used as an emission layer in an electroluminescence device. In electroluminescence, only a small fraction of the NCs within the aggregate is emitting as a result of efficient charge migration, accumulation and selective recombination on larger NCs, leading to pronounced blinking and decreased efficiency. Under the condition of comparable excitation rates in both electroluminescence and photoluminescence, the intrinsic quantum yield in electroluminescence is on average 0.36 of that in photoluminescence.

Halide perovskite nanocrystals show high photoluminescence (PL) but their electroluminescence (EL) devices suffered from low external quantum efficiency. Here Sharma et al. study both individual and statistical PL and EL behaviors of these nanocrystals and reveal the origin of the lower EL efficiency.

Fluorescence Anisotropy Reloaded-Emerging Polarization Microscopy Methods for Assessing Chromophores' Organization and Excitation Energy Transfer in Single Molecules, Particles, Films, and Beyond

Fluorescence polarization is widely used to assess the orientation/rotation of molecules, and the excitation energy transfer between closely located chromophores. Emerging since the 1990s, single molecule fluorescence spectroscopy and imaging stimulate the application of light polarization for studying molecular organization and energy transfer beyond ensemble averaging. Here, traditional fluorescence polarization and linear dichroism methods used for bulk samples are compared with techniques specially developed for, or inspired by, single molecule fluorescence spectroscopy. Techniques for assessing energy transfer in anisotropic samples, where the traditional fluorescence anisotropy framework is not readily applicable, are discussed in depth. It is shown that the concept of a polarization portrait and the single funnel approximation can lay the foundation for alternative energy transfer metrics. Examples ranging from fundamental studies of photoactive materials (conjugated polymers, light-harvesting aggregates, and perovskite semiconductors) to Förster resonant energy transfer (FRET)-based biomedical imaging are presented. Furthermore, novel uses of light polarization for super-resolution optical imaging are mentioned as well as strategies for avoiding artifacts in polarization microscopy.

π-Conjugated nanostructured materials: preparation, properties and photonic applications

This article reviews recent advances in π-conjugated nanostructures based on conjugated oligomers and polymers, focusing on their preparation, energy transfer abilities, optoelectronic and laser applications, and photophysical properties including light harvesting. This is a rapidly evolving field as these materials are expected to have many important applications in areas such as light-emitting diodes, solid-state lighting, photovoltaics, solid-state lasers, biophotonics, sensing, imaging, photocatalysis, and photodynamic therapy. Other advantages of these materials are their versatility, and consequently, their adaptability to diverse fields.

Fluctuations in the Emission Polarization and Spectrum in Single Chains of a Common Conjugated Polymer for Organic Photovoltaics

Measuring the nanoscale organization of conjugated polymer chains used in organic photovoltaic (OPV) blends is vital if one wants to understand the materials. This is made very difficult with high efficiency OPV polymers such as PTB7 that form aggregates, as a lack of periodicity and a high degree of disorder make understanding of the nanoscale organization challenging. Here, single molecule spectroscopy is used to observe single chains and aggregates of PTB7. Using four detectors the photoluminescence intensity, wavelength, polarization, and lifetime are simultaneously monitored. Fast (milliseconds) and slow (seconds) fluctuations are observed over a time window of 30 s in all of these observables from single aggregates and chains as individual chromophores activate and deactivate, leading to dynamical changes in the emission spectrum and dipole orientation. This information can be used to help reconstruct the spatial and spectral organization of disordered aggregates of PTB7, thereby adding valuable new information on how the chains are arranged in space.

Exploring Electronic Structure and Order in Polymers via Single-Particle Microresonator Spectroscopy

PSS, a transparent electrically conductive polymer, finds widespread use in electronic devices. While empirical efforts have increased conductivity, a detailed understanding of the coupled electronic and morphological landscapes in PEDOT:PSS has lagged due to substantial structural heterogeneity on multiple length-scales. We use an optical microresonator-based absorption spectrometer to perform single-particle measurements, providing a bottom-up examination of electronic structure and morphology ranging from single PEDOT:PSS polymers to nascent films. Using single-particle spectroscopy with complementary theoretical calculations and ultrafast spectroscopy, we demonstrate that PEDOT:PSS displays bulk-like optical response even in single polymers. We find highly ordered PEDOT assemblies with long-range ordering mediated by the insulating PSS matrix and reveal a preferential surface orientation of PEDOT nanocrystallites absent in bulk films with implications for interfacial electronic communication. Our single-particle perspective provides a unique window into the microscopic structure and electronic properties of PEDOT:PSS.

Real-time observation of conformational switching in single conjugated polymer chains

Conjugated polymers (CPs) are an important class of organic semiconductors that combine novel optoelectronic properties with simple processing from organic solvents. It is important to study CP conformation in solution to understand the physics of these materials and because it affects the properties of solution-processed films. Single-molecule techniques are unique in their ability to extract information on a chain-to-chain basis; however, in the context of CPs, technical challenges have limited their general application to host matrices or semiliquid environments that constrain the conformational dynamics of the polymer. We introduce a conceptually different methodology that enables measurements in organic solvents using the single-end anchoring of polymer chains to avoid diffusion while preserving polymer flexibility. We explore the effect of organic solvents and show that, in addition to chain-to-chain conformational heterogeneity, collapsed and extended polymer segments can coexist within the same chain. The technique enables real-time solvent-exchange measurements, which show that anchored CP chains respond to sudden changes in solvent conditions on a subsecond time scale. Our results give an unprecedented glimpse into the mechanism of solvent-induced reorganization of CPs and can be expected to lead to a new range of techniques to investigate and conformationally manipulate CPs.

Effects of molecular architecture on morphology and photophysics in conjugated polymers: from single molecules to bulk

A definitive comprehension of morphology and photophysics in conjugated polymers at multiple length scales demands both single molecule spectroscopy and well-controlled molecular architectures.

Conjugated polymers (CPs) possess a wide range of desirable properties, including accessible energetic bandgaps, synthetic versatility, and mechanical flexibility, which make them attractive for flexible and wearable optoelectronic devices. An accurate and comprehensive understanding about the morphology–photophysics relations in CPs lays the groundwork for their development in these applications. However, due to the complex roles of chemical structure, side-chains, backbone, and intramolecular interactions, CPs can exhibit heterogeneity in both their morphology and optoelectronic properties even at the single chain level. This molecular level heterogeneity together with complicated intermolecular interactions found in bulk CP materials severely obscures the deterministic information about the morphology and photophysics at different hierarchy levels. To counter this complexity and offer a clearer picture for the properties of CP materials, we highlight the approach of probing material systems with specific structural features via single molecule/aggregate spectroscopy (SMS). This review article covers recent advances achieved through such an approach regarding the important morphological and photophysical properties of CPs. After a brief review of the typical characteristics of CPs, we present detailed discussions of structurally well-defined model systems of CPs, from manipulated backbones and side-chains, up to nano-aggregates, studied with SMS to offer deterministic relations between morphology and photophysics from single chains building up to bulk states.

In Situ Two-Step Photoreduced SERS Materials for On-Chip Single-Molecule Spectroscopy with High Reproducibility

A method is developed to synthesize surface-enhanced Raman scattering (SERS) materials capable of single-molecule detection, integrated with a microfluidic system. Using a focused laser, silver nanoparticle aggregates as SERS monitors are fabricated in a microfluidic channel through photochemical reduction. After washing out the monitor, the aggregates are irradiated again by the same laser. This key step leads to full reduction of the residual reactants, which generates numerous small silver nanoparticles on the former nanoaggregates. Consequently, the enhancement ability of the SERS monitor is greatly boosted due to the emergence of new "hot spots." At the same time, the influence of the notorious "memory effect" in microfluidics is substantially suppressed due to the depletion of surface residues. Taking these advantages, two-step photoreduced SERS materials are able to detect different types of molecules with the concentration down to 10^-13 m. Based on a well-accepted bianalyte approach, it is proved that the detection limit reaches the single-molecule level. From a practical point of view, the detection reproducibility at different probing concentrations is also investigated. It is found that the effective single-molecule SERS measurements can be raised up to ≈50%. This microfluidic SERS with high reproducibility and ultrasensitivity will find promising applications in on-chip single-molecule spectroscopy.

Ultrasmall Conjugated Polymer Nanoparticles with High Specificity for Targeted Cancer Cell Imaging

Fluorescent and biocompatible organic nanoparticles have attracted great interest in cancer detection and imaging, but the nonspecific cellular uptake has limited the detection specificity and sensitivity. Herein, the authors report the ultrasmall conjugated polymer nanoparticles (CPNs) with bright far-red/near-infrared emission for targeted cancer imaging with high specificity. The sizes of the ultrasmall CPNs are around 6 nm (CPN6), while large CPNs show sizes around 30 nm (CPN30). Moreover, CPN6 exhibits largely improved fluorescence quantum yield (η) of 41% than CPN30 (25%). Benefiting from the ultrasmall size, bare CPN6 shows largely suppressed nonspecific cellular uptake as compared to CPN30, while cyclic arginine-glycine-aspartic acid (cRGD) functionalized CPN6 (cRGD-CPN6) possesses excellent selectivity toward αvβ3 integrin overexpressed MDA-MB-231 cells over other cells in cell mixtures. The faster body clearance of CPN6 over CPN30 indicates its greater potentials as a noninvasive nanoprobe for in vivo and practical applications.

Anomalous Above-Gap Photoexcitations and Optical Signatures of Localized Charge Puddles in Monolayer Molybdenum Disulfide

Broadband optoelectronics such as artificial light harvesting technologies necessitate efficient and, ideally, tunable coupling of excited states over a wide range of energies. In monolayer MoS₂, a prototypical two-dimensional layered semiconductor, the excited state manifold spans the visible electromagnetic spectrum and is comprised of an interconnected network of excitonic and free-carrier excitations. Here, photoluminescence excitation spectroscopy is used to reveal the energetic and spatial dependence of broadband excited state coupling to the ground-state luminescent excitons of monolayer MoS₂. Photoexcitation of the direct band gap excitons is found to strengthen with increasing energy, demonstrating that interexcitonic coupling across the Brillouin zone is more efficient than previously reported, and thus bolstering the import and appeal of these materials for broadband optoelectronic applications. Narrow excitation resonances that are superimposed on the broadband photoexcitation spectrum are identified and coincide with the energetic positions of the higher-energy excitons and the electronic band gap as predicted by first-principles calculations. Identification of such features outlines a facile route to measure the optical and electronic band gaps and thus the exciton binding energy in the more sophisticated device architectures that are necessary for untangling the rich many-body phenomena and complex photophysics of these layered semiconductors. In as-grown materials, the excited states exhibit microscopic spatial variations that are characteristic of local carrier density fluctuations, similar to charge puddling phenomena in graphene. Such variations likely arise from substrate inhomogeneity and demonstrate the possibility to use substrate patterning to tune local carrier density and dynamically control excited states for designer optoelectronics.

Enhancing the photostability of poly(phenylene ethynylene) for single particle studies

Enhanced photostability of conjugated polyelectrolytes achieved by using anti-fading agents opens the way for advanced single molecule fluorescence imaging studies.

Molecular Water Lilies: Orienting Single Molecules in a Polymer Film by Solvent Vapor Annealing

The microscopic orientation and position of photoactive molecules is crucial to the operation of optoelectronic devices such as OLEDs and solar cells. Here, we introduce a shape-persistent macrocyclic molecule as an excellent fluorescent probe to simply measure (i) its orientation by rotating the excitation polarization and recording the strength of modulation in photoluminescence (PL) and (ii) its position in a film by analyzing the overall PL brightness at the molecular level. The unique shape, the absorption and the fluorescence properties of this probe yield information on molecular orientation and position. We control orientation and positioning of the probe in a polymer film by solvent vapor annealing (SVA). During the SVA process the molecules accumulate at the polymer/air interface, where they adopt a flat orientation, much like water lilies on the surface of a pond. The results are potentially significant for OLED fabrication and single-molecule spectroscopy (SMS) in general.

Organic Optoelectronic Materials: Mechanisms and Applications

Organic (opto)electronic materials have received considerable attention due to their applications in thin-film-transistors, light-emitting diodes, solar cells, sensors, photorefractive devices, and many others. The technological promises include low cost of these materials and the possibility of their room-temperature deposition from solution on large-area and/or flexible substrates. The article reviews the current understanding of the physical mechanisms that determine the (opto)electronic properties of high-performance organic materials. The focus of the review is on photoinduced processes and on electronic properties important for optoelectronic applications relying on charge carrier photogeneration. Additionally, it highlights the capabilities of various experimental techniques for characterization of these materials, summarizes top-of-the-line device performance, and outlines recent trends in the further development of the field. The properties of materials based both on small molecules and on conjugated polymers are considered, and their applications in organic solar cells, photodetectors, and photorefractive devices are discussed.

Temporal Fluctuations in Excimer-Like Interactions between π-Conjugated Chromophores

Inter- or intramolecular coupling processes between chromophores such as excimer formation or H- and J-aggregation are crucial to describing the photophysics of closely packed films of conjugated polymers. Such coupling is highly distance dependent and should be sensitive to both fluctuations in the spacing between chromophores as well as the actual position on the chromophore where the exciton localizes. Single-molecule spectroscopy reveals these intrinsic fluctuations in well-defined bichromophoric model systems of cofacial oligomers. Signatures of interchromophoric interactions in the excited state--spectral red shifting and broadening and a slowing of photoluminescence decay--correlate with each other but scatter strongly between single molecules, implying an extraordinary distribution in coupling strengths. Furthermore, these excimer-like spectral fingerprints vary with time, revealing intrinsic dynamics in the coupling strength within one single dimer molecule, which constitutes the starting point for describing a molecular solid. Such spectral sensitivity to sub-Ångström molecular dynamics could prove complementary to conventional FRET-based molecular rulers.

Molecular Weight Determination by Counting Molecules

Molecular weight (MW) is one of the most important characteristics of macromolecules. Sometimes, MW cannot be measured correctly by conventional methods like gel permeation chromatography (GPC) due to, for example, aggregation. We propose using single-molecule spectroscopy to measure the average MW simply by counting individual fluorescent molecules embedded in a thin matrix film at known mass concentration. We tested the method on dye molecules, a labeled protein, and the conjugated polymer MEH-PPV. We showed that GPC with polystyrene calibration overestimates the MW of large MEH-PPV molecules by 40 times due to chain aggregation and stiffness. This is a crucial observation for understanding correlations between the conjugated polymer length, photophysics and performances of devices. The method can measure the MW of fluorescent molecules, biological objects, and nanoparticles at ultimately low concentrations and does not need any reference; it is conformation-independent and has no limitations regarding the detected MW range.

An electric field induced reversible single-molecule fluorescence switch

Based on the intramolecular electron transfer within a single molecule, we have achieved fluorescence switch induced by the electric field.

Excitation Spectra and Stokes Shift Measurements of Single Organic Dyes at Room Temperature

We report measurements of excitation and emission spectra of single, polymer-embedded, perylene dye molecules at room temperature. From these measurements, we can derive the Stokes shift for each single molecule. We determined the distribution of excitation and emission peak energies and, thus, the distribution of single molecule Stokes shifts. Single molecule Stokes shifts have not been recorded to date, and the Stokes shift has often been assumed to be constant in single molecule studies. Our data show that the observed spectral heterogeneity in single molecule emission originates not only from synchronous energetic shifts of the excitation and the emission spectra but also from variations in the Stokes shift, speaking against the assumption of constant Stokes shift.

Singlet-triplet annihilation limits exciton yield in poly(3-hexylthiophene)

Control of chain length and morphology in combination with single-molecule spectroscopy techniques provides a comprehensive photophysical picture of excited-state losses in the prototypical conjugated polymer poly(3-hexylthiophene) (P3HT). Our examination reveals a universal self-quenching mechanism, based on singlet-triplet exciton annihilation, which accounts for the dramatic loss in fluorescence quantum yield of a single P3HT chain between its solution (unfolded) and bulklike (folded) state. Triplet excitons fundamentally limit the fluorescence of organic photovoltaic materials, which impacts the conversion of singlet excitons to separated charge carriers, decreasing the efficiency of energy harvested at high excitation densities. Interexcitonic interactions are so effective that a single P3HT chain of order 100  kDa weight behaves like a 2-level system, exhibiting perfect photon antibunching.

Influence of Molecular Conformations and Microstructure on the Optoelectronic Properties of Conjugated Polymers

It is increasingly obvious that the molecular conformations and the long-range arrangement that conjugated polymers can adopt under various experimental conditions in bulk, solutions or thin films, significantly impact their resulting optoelectronic properties. As a consequence, the functionalities and efficiencies of resulting organic devices, such as field-effect transistors, light-emitting diodes, or photovoltaic cells, also dramatically change due to the close structure/property relationship. A range of structure/optoelectronic properties relationships have been investigated over the last few years using various experimental and theoretical methods, and, further, interesting correlations are continuously revealed by the scientific community. In this review, we discuss the latest findings related to the structure/optoelectronic properties interrelationships that exist in organic devices fabricated with conjugated polymers in terms of charge mobility, absorption, photoluminescence, as well as photovoltaic properties.

Unraveling the Electronic Heterogeneity of Charge Traps in Conjugated Polymers by Single-Molecule Spectroscopy

Charge trapping is taken for granted in modeling the characteristics of organic semiconductor devices, but very few techniques actually exist to spectroscopically pinpoint trap states. For example, trap levels are often assumed to be discrete in energy. Using the well-known keto defect in polyfluorene as a model, we demonstrate how single-molecule spectroscopy can directly track the formation of charge and exciton traps in conjugated polymers in real time, providing crucial information on the energetic distribution of trap sites relative to the polymer optical gap. Charge traps with universal spectral fingerprints scatter by almost 1 eV in depth, implying that substantial heterogeneity must be taken into account when modeling devices.

Effect of the side-chain-distribution density on the single-conjugated-polymer-chain conformation

The spatial arrangement of the side chains of conjugated polymer backbones has critical effects on the morphology and electronic and photophysical properties of the corresponding bulk films. The effect of the side-chain-distribution density on the conformation at the isolated single-polymer-chain level was investigated with regiorandom (rra-) poly(3-hexylthiophene) (P3HT) and poly(3-hexyl-2,5-thienylene vinylene) (P3HTV). Although pure P3HTV films are known to have low fluorescence quantum efficiencies, we observed a considerable increase in fluorescence intensity by dispersing P3HTV in poly(methyl methacrylate) (PMMA), which enabled a single-molecule spectroscopy investigation. With single-molecule fluorescence excitation polarization spectroscopy, we found that rra-P3HTV single molecules form highly ordered conformations. In contrast, rra-P3HT single molecules, display a wide variety of different conformations from isotropic to highly ordered, were observed. The experimental results are supported by extensive molecular dynamics simulations, which reveal that the reduced side-chain-distribution density, that is, the spaced-out side-chain substitution pattern, in rra-P3HTV favors more ordered conformations compared to rra-P3HT. Our results demonstrate that the distribution of side chains strongly affects the polymer-chain conformation, even at the single-molecule level, an aspect that has important implications when interpreting the macroscopic interchain packing structure exhibited by bulk polymer films.

Unraveling the chromophoric disorder of poly(3-hexylthiophene)

The spectral breadth of conjugated polymers gives these materials a clear advantage over other molecular compounds for organic photovoltaic applications and is a key factor in recent efficiencies topping 10%. However, why do excitonic transitions, which are inherently narrow, lead to absorption over such a broad range of wavelengths in the first place? Using single-molecule spectroscopy, we address this fundamental question in a model material, poly(3-hexylthiophene). Narrow zero-phonon lines from single chromophores are found to scatter over 200 nm, an unprecedented inhomogeneous broadening that maps the ensemble. The giant red shift between solution and bulk films arises from energy transfer to the lowest-energy chromophores in collapsed polymer chains that adopt a highly ordered morphology. We propose that the extreme energetic disorder of chromophores is structural in origin. This structural disorder on the single-chromophore level may actually enable the high degree of polymer chain ordering found in bulk films: both structural order and disorder are crucial to materials physics in devices.

Cyclodextrin insulation prevents static quenching of conjugated polymer fluorescence at the single molecule level

Conjugated polymers (CPs) are promising materials for fluorescence imaging application. However, a significant problem in this field is the unexplained abnormally low fluorescence brightness (or number of fluorescence photons detected per one excitation photon) exhibited by most of CP single chains in solid polymer hosts. Here it is shown that this detrimental effect can be fully avoided for short chains of polyfluorene-bis-vinylphenylene (PFBV) embedded in a host polymer matrix of PMMA, if the conjugated backbone is insulated by cyclodextrin rings to form a polyrotaxane (PFBV-Rtx). Fluorescence kinetics and quantum yields are measured for the polymers in liquid solutions, pristine films, and solid PMMA blends. The fluorescence brightness of PFBV-Rtx single chains dispersed in a solid PMMA is very close to that expected for a chain with 100% fluorescence quantum yield, while the unprotected PFBV chains of the same length possess 4 times lower brightness. Despite this, the fluorescence decay kinetics are the same for both polymers, suggesting the presence of static or ultrafast fluorescence quenching in the unprotected polymer. About 80% of an unprotected PFBV chain is estimated to be completely quenched. The hypothesis is that the cyclodextrin rings prevent the quenching by working as 'bumpers' reducing the mechanical forces applied by the host polymer to the conjugated backbone and help retaining its conformational freedom. While providing a recipe for making CP fluorescence bright at the single-molecule level, these results identify a lack of fundamental understanding in the community of the influence of the environment on excited states in conjugated materials.