Spirocyclic aromatic hydrocarbon-based organic nanosheets for eco-friendly aqueous processed thin-film non-volatile memory devices

Tuning the Absorption, Fluorescence, Intramolecular Charge Transfer, and Intersystem Crossing in Spiro[fluorene]acridinone

In this work, we prepared a series of electron donor-acceptor systems based on spiro[fluorene-9,7'-dibenzo[c,h]acridine]-5'-one (SFDBAO). Our SFDBAOs consist of orthogonally positioned fluorenes and aromatic ketones. By fine-tuning the substitution of electron-donating pyrenes, the complex interplay among different excited-state decay channels and the overall impact of solvents on these decay channels were uncovered. Placing pyrene, for example, at the aromatic ketones resulted in a profound solvatochromism in the form of a bright charge-transfer (CT) emission spanning from yellow to red-NIR. In contrast, a dark non-emissive CT was noted upon pyrene substitution at the fluorenes. In apolar solvents, efficient triplet-excited state generation was observed for all SFDBAOs. Either charge transfer was concluded to mediate the intersystem crossing (ISC) in the case of pyrene substitution or the El-Sayed rule was applicable when lacking pyrene substitution as in the case of SFABAO. In polar solvents, charge separation is the sole decay upon pyrene substitution. Moreover, competition between ISC and CT lowered the triplet-excited state generation in SFDBAO.

Regulating and Predicting the Polyhedral Crystal Morphology in Spirofluorene Molecular Systems

Crystallization of organic steric molecules often leads to multiple polyhedral crystal morphologies. However, the relationships among the molecular structure, supramolecular interaction, aggregation mode and crystal morphology are still unclear. In this work, we elaborate two model crystals formed by spiro[fluorene-9,9'-xanthene] (SFX) and spiro[cyclopenta[1,2-b : 5,4-b']dipyridine-5,9'-xanthene] (SDAFX) to demonstrate the feasibility of morphology prediction by periodic bond chain (PBC) theory based on interaction energy (IE) values in terms of single point energy. With non-directional van der Waals forces, only one PBC direction is found in SFX crystal, leading to the irregular 1D rod-like structure. Compared with SFX, the extra N heteroatoms in SDAFX can bring additional hydrogen bonds and some other interactions into the bulky molecular skeletons, inducing 3-dimensionally oriented PBCs to form the explicit F-face network in SDAFX which leads to the final octahedral structure. A simple and accurate method has been provided to quantify PBC vector on the supramolecular level in the organic molecular system, and the PBC theory has also been further demonstrated and developed in the morphology prediction of organic spiro-molecules.

Hierarchical Nanoarchitectonics of Ultrathin 2D Organic Nanosheets for Aqueous Processed Electroluminescent Devices

Ultrathin 2D organic nanosheets (2DONs) with high mobility have received tremendous attention due to thickness of few molecular layers. However, ultrathin 2DONs with high luminescence efficiency and flexibility simultaneously are rarely reported. Here, the ultrathin 2DONs (thickness: 19 nm) through the modulation of tighter molecular packing (distance: ≈3.31 Å) achievable from the incorporation of methoxyl and dipenylamine (DPA) groups into 3D spirofluorenexanthene (SFX) building blocks is successfully prepared. Even with closer molecular stacking, ultrathin 2DONs still enable the suppression of aggregation quenching to exhibit higher quantum yields of blue emission (Φ_F  = 48%) than that on amorphous film (Φ_F  = 20%), and show amplified spontaneous emission (ASE) with a mediate threshold (332 mW cm^-2 ). Further, through drop-casting method, the ultrathin 2DONs are self-organized into large-scale flexible 2DONs films (1.5 × 1.5 cm) with the low hardness (H: 0.008 Gpa) and low Young's modulus (E_r : 0.63 Gpa). Impressively, the large-scale 2DONs film can realize electroluminescence performances with a maximum luminance (445 cd m^-2 ) and low turn on voltage (3.7 V). These ultrathin 2DONs provide a new avenue for the realization of flexible electrically pumping lasers and intelligent quantum tunneling systems.

A Bio-Inspired Molecular Design Strategy toward 2D Organic Semiconductor Crystals with Superior Integrated Optoelectronic Properties

Inspired by the 2D bilayer lipid membranes in nature, a unique supramolecular "push-pull" synergetic strategy toward self-assembled 2D organic crystals (2DOCs) is proposed in this work, which can effectively suppress the interlayer 3D stacking while maintaining the assembly of the intralayer for 2D growth. For this purpose, a model molecule PF-Py consisting of a planar supramolecular "attractor" and a nonplanar steric "repellor" is designed for the solution self-assembly process. Well-defined 2DOCs including crystal nanosheets and millimeter-sized crystal films with layered amphiphile-like packing are obtained, which is analogical to the cell membranes of living organisms. Thanks to the special packing mode, the 2DOCs have fascinating integrated photoelectric property, with high mobility of 7.8 × 10^-2 cm² V^-1 s^-1 , high crystalline state photoluminescence quantum yield of 55%, and superior deep-blue laser characteristics with a low threshold of 5.51 µJ cm^-2 . This supramolecular synergetic strategy advances the design of 2D organic semiconductor crystals for high performance optoelectronics.

Enhanced emission in organic nanocrystals via asymmetrical design of spirocyclic aromatic hydrocarbons

Two spirocyclic aromatic hydrocarbon derivatives were prepared to clarify the molecular geometry effects on the regulation of the crystalline morphologies and photophysical behaviors of organic nanocrystals. Due to the different structural symmetry of a spiro-center, distinguishing nanocrystal morphologies with unique crystallization-enhanced/quenched emission was achieved.

Supramolecular steric hindrance effect on morphologies and photophysical behaviors of spirocyclic aromatic hydrocarbon nanocrystals

Three pyrene-based spirocyclic aromatic hydrocarbons (Py-SAHs) were prepared to clarify the roles of molecular segments in regulating the morphologies and photophysical properties of organic microcrystals. Due to the different supramolecular steric hindrance (SSH) effect between bulky groups and pyrene rings, distinct nanocrystal morphologies with unique photoluminescence properties were realized.

Self-assembly of Pt nanocrystals into three-dimensional superlattices results in enhanced electrocatalytic performance for methanol oxidation

A simple low-temperature solution approach was developed to directly realize a series of three-dimensional Pt nanocrystal superlattices composed of well-defined interior Pt nanocrystals for enhanced electrocatalytic performance for methanol oxidation.

Phototunable Biomemory Based on Light-Mediated Charge Trap

Phototunable biomaterial-based resistive memory devices and understanding of their underlying switching mechanisms may pave a way toward new paradigm of smart and green electronics. Here, resistive switching behavior of photonic biomemory based on a novel structure of metal anode/carbon dots (CDs)-silk protein/indium tin oxide is systematically investigated, with Al, Au, and Ag anodes as case studies. The charge trapping/detrapping and metal filaments formation/rupture are observed by in situ Kelvin probe force microscopy investigations and scanning electron microscopy and energy-dispersive spectroscopy microanalysis, which demonstrates that the resistive switching behavior of Al, Au anode-based device are related to the space-charge-limited-conduction, while electrochemical metallization is the main mechanism for resistive transitions of Ag anode-based devices. Incorporation of CDs with light-adjustable charge trapping capacity is found to be responsible for phototunable resistive switching properties of CDs-based resistive random access memory by performing the ultraviolet light illumination studies on as-fabricated devices. The synergistic effect of photovoltaics and photogating can effectively enhance the internal electrical field to reduce the switching voltage. This demonstration provides a practical route for next-generation biocompatible electronics.

Variable segment roles: modulation of the packing modes, nanocrystal morphologies and optical emissions

Three isomers were prepared by covalently grafting carbazole (Cz) onto spiro[fluorene-9,9'-xanthene] (SFX) at different positions. Due to the complicated and variable roles of molecular segments, an evolution of the corresponding molecular packing mode was realized, accompanied by the change of nanocrystal morphology and photoluminescence properties.

SMART Design of a Bulk-Capped Supramolecular Segment for the Assembly into Organic Interdigital Lipid Bilayer-Like (ILB) Nanosheets

Rational molecular design for the organic nanocrystal morphology still remains a challenge due to the structural diversity and complicated weak intermolecular interactions. In this work, a typical attractor-repulsor molecule N,N-diphenyl-4-(9-phenyl-fluoren-9-yl) phenylamine (TPA-PF) is designed to explore a general assembly strategy for 2D nanocrystals. Via an interdigital lipid bilayer-like (ILB) molecular packing mode, large-sized lamellar 2D nanosheets are obtained with a length:width:thickness ratio as ≈2500:1000:1. The d-spacing of the largest (001) plane is 1.32 nm, which equals to the thickness of a single interdigital stacking layer. The synergetic effect of the attractive supramolecular segment (TPA) and the repulsive bulky group (PF) is supposed to be the critical factor for the ILB packing that leads to the 2D structures. The attractor-repulsor molecule design is expected to be an effective strategy for the growth of 2D nanocrystals based on small organic molecules.

Two-dimensional light-emitting materials: preparation, properties and applications

We review the recent development in two-dimensional (2D) light-emitting materials and describe their preparation methods, optical/optoelectronic properties and applications.

Photooxygenations and Self-Sensitizations of Naphthylamines: Efficient Access to Iminoquinones

A series of spiro [fluorene-9,7′-dibenzo[c,h]acridine]-5′-one (SFDBAO) derivatives have been concisely and cleanly obtained by exposure to sunlight without external photosensitizers in the higher yields than that when using a UV lamp. An interesting autocatalyst and self-sensitive procedure have been proposed to explain the effective photooxygenation. SFDBAO derivatives exhibit the continuous π-stacks in single-crystal and electron-withdraw properties with red light-emitting and photovoltaic properties.

Stretchable Organic Semiconductor Devices

Stretchable electronics are essential for the development of intensely packed collapsible and portable electronics, wearable electronics, epidermal and bioimplanted electronics, 3D surface compliable devices, bionics, prosthesis, and robotics. However, most stretchable devices are currently based on inorganic electronics, whose high cost of fabrication and limited processing area make it difficult to produce inexpensive, large-area devices. Therefore, organic stretchable electronics are highly attractive due to many advantages over their inorganic counterparts, such as their light weight, flexibility, low cost and large-area solution-processing, the reproducible semiconductor resources, and the easy tuning of their properties via molecular tailoring. Among them, stretchable organic semiconductor devices have become a hot and fast-growing research field, in which great advances have been made in recent years. These fantastic advances are summarized here, focusing on stretchable organic field-effect transistors, light-emitting devices, solar cells, and memory devices.

Ultra-Lightweight Resistive Switching Memory Devices Based on Silk Fibroin

Ultra-lightweight resistive switching memory based on protein has been demonstrated. The memory foil is 0.4 mg cm(-2) , which is 320-fold lighter than silicon substrate, 20-fold lighter than office paper and can be sustained by a human hair. Additionally, high resistance OFF/ON ratio of 10(5) , retention time of 10(4) s, and excellent flexibility (bending radius of 800 μm) have been achieved.

Physically Transient Resistive Switching Memory Based on Silk Protein

Physically transient resistive switching devices based on silk protein are successfully demonstrated. The devices can be absolutely dissolved in deionized water or in phosphate-buffered saline in 2 h. At the same time, a reasonable resistance OFF/ON ratio of larger than 10(2) and a retention time of more than 10(4) s are achieved for nonvolatile memory applications.

Detection of trapped charges in the blend films of polystyrene/SFDBAO electrets by electrostatic and Kelvin probe force microscopy

The charge trapping properties of the blend of polystyrene (PS) and a sterically hindered organic semiconductor SFDBAO (spiro[fluorene-9,7-dibenzo[c,h]acridin-5-one]) are investigated by electrostatic and Kelvin probe force microscopy (EFM and KPFM).

Organic nanophotonic materials: the relationship between excited-state processes and photonic performances

Organic active nanophotonics: excited-state coupled photonic behaviours strongly determine the optical performances of organic nanomaterials. The photonic actions and related material properties can be well controlled by tailoring the intra/inter-molecular excited-state processes.

Resistive Switching Memory Devices Based on Proteins

Resistive switching memory constitutes a prospective candidate for next-generation data storage devices. Meanwhile, naturally occurring biomaterials are promising building blocks for a new generation of environmentally friendly, biocompatible, and biodegradable electronic devices. Recent progress in using proteins to construct resistive switching memory devices is highlighted. The protein materials selection, device engineering, and mechanism of such protein-based resistive switching memory are discussed in detail. Finally, the critical challenges associated with protein-based resistive switching memory devices are presented, as well as insights into the future development of resistive switching memory based on natural biomaterials.

The photoirradiation induced p-n junction in naphthylamine-based organic photovoltaic cells

The bulk heterojunction (BHJ) plays an indispensable role in organic photovoltaics, and thus has been investigated extensively in recent years. While a p-n heterojunction is usually fabricated using two different donor and acceptor materials such as poly(3-hexylthiophene-2,5-diyl) (P3HT) and phenyl-C61-butyric acid methyl ester (PCBM), it is really rare that such a BHJ is constructed by a single entity. Here, we presented a photoirradiation-induced p-n heterojunction in naphthylamine-based organic photovoltaic cells, where naphthylamine as a typical p-type semiconductor could be oxidized under photoirradiation and transformed into a new semiconductor with the n-type character. The p-n heterojunction was realized using both the remaining naphthylamine and its oxidative product, giving rise to the performance improvement in organic photovoltaic devices. The experimental results show that the power conversion efficiency (PCE) of the devices could be achieved up to 1.79% and 0.43% in solution and thin film processes, respectively. Importantly, this technology using naphthylamine does not require classic P3HT and PCBM to realize the p-n heterojunction, thereby simplifying the device fabrication process. The present approach opens up a promising route for the development of novel materials applicable to the p-n heterojunction.

Synthesis and Morphology of Two Carbazole-Pyrazoline-Containing Polymer Systems and Their Electrical Memory Performance

A new atom-transfer radical polymerization (ATRP) initiator 4-[1-(2-dodecyl-1,3-dioxo-2,3-dihydro-1H-benzo[de]isoquinolin-6-yl)-3-(4-nitrophenyl)-4,5-dihydro-1H-pyrazol-5-yl]phenyl 2-bromo-2-methylpropanoate (IN) as an electron acceptor (A) and a monomer 2-(9H-carbazole-9-yl)-ethyl methacrylate (MCz) as an electron donor (D) were simultaneously introduced into two different D-A polymer systems by using the end-functionalizing or blending method. The mass percentage of IN in the end-functionalized polymer PMCz-IN and the mixed polymer composite PMCz+IN were both controlled at approximately 1.0 wt %. The optical, electrochemical, and surface morphology properties of the two polymeric films prepared by means of spin-coating technology were comparatively investigated. Sandwich devices based on PMCz-IN and PMCz+IN demonstrated nonvolatile write-once-read-many-times memory (WORM) and volatile static random access memory (SRAM) characteristics, respectively, which were further verified by the Kelvin probe force microscopy (KPFM) measurements. The proposed memory mechanism could be attributed to the formation of a stable charge-transfer (CT) complex for PMCz-IN and an unstable CT complex for PMCz+IN. Furthermore, the different distribution of IN in the two polymeric films might be the main reason for the stability of the CT complex.

Functionalized graphitic carbon nitride for metal-free, flexible and rewritable nonvolatile memory device via direct laser-writing

Graphitic carbon nitride nanosheet (g-C3N4-NS) has layered structure similar with graphene nanosheet and presents unusual physicochemical properties due to the s-triazine fragments. But their electronic and electrochemical applications are limited by the relatively poor conductivity. The current work provides the first example that atomically thick g-C3N4-NSs are the ideal candidate as the active insulator layer with tunable conductivity for achieving the high performance memory devices with electrical bistability. Unlike in conventional memory diodes, the g-C3N4-NSs based devices combined with graphene layer electrodes are flexible, metal-free and low cost. The functionalized g-C3N4-NSs exhibit desirable dispersibility and dielectricity which support the all-solution fabrication and high performance of the memory diodes. Moreover, the flexible memory diodes are conveniently fabricated through the fast laser writing process on graphene oxide/g-C3N4-NSs/graphene oxide thin film. The obtained devices not only have the nonvolatile electrical bistability with great retention and endurance, but also show the rewritable memory effect with a reliable ON/OFF ratio of up to 10(5), which is the highest among all the metal-free flexible memory diodes reported so far, and even higher than those of metal-containing devices.

Fluorene-based macromolecular nanostructures and nanomaterials for organic (opto)electronics

Nanotechnology not only opens up the realm of nanoelectronics and nanophotonics, but also upgrades organic thin-film electronics and optoelectronics. In this review, we introduce polymer semiconductors and plastic electronics briefly, followed by various top-down and bottom-up nano approaches to organic electronics. Subsequently, we highlight the progress in polyfluorene-based nanoparticles and nanowires (nanofibres), their tunable optoelectronic properties as well as their applications in polymer light-emitting devices, solar cells, field-effect transistors, photodetectors, lasers, optical waveguides and others. Finally, an outlook is given with regard to four-element complex devices via organic nanotechnology and molecular manufacturing that will spread to areas such as organic mechatronics in the framework of robotic-directed science and technology.