Self-assembled monolayers of cyclohexyl-terminated phosphonic acids as a general dielectric surface for high-performance organic thin-film transistors

Synthesis, Structures and Properties of Trioxa[9]circulene and Diepoxycyclononatrinaphthalene

This article presents trioxa[9]circulene (3) as a novel member of hetero[n]circulenes. Its synthesis began with the synthesis of dimethoxydioxa[8]helicene (5) and used dimethoxydiepoxycyclononatrinaphthalene (4) as a key intermediate, despite the condensation reaction predominantly yielding a 1,4-addition byproduct. The structures and properties of 3-5 were extensively investigated using experimental and computational methods. Analysis of the crystal structures reveal elongation of the internal C-C bonds in the nine-membered ring of 3 compared to 4 and 5. Computational studies demonstrate the remarkable flexibility of trioxa[9]circulene's saddle-shaped polycyclic framework, while the other two compounds are rigid with large racemization barriers. Optically pure forms of 4 and 5 exhibit absorption and luminescence dissymmetry factors on the order of 10-2, with smaller values observed for compound 4. In the crystal structures, molecules of 3 stack to form columns with remarkable π-π overlap, and the π-π interactions of 4 exhibit short intermolecular C-to-C contacts. Consequently, the solution-processed film of 4 functioned as a p-type organic semiconductor in field effect transistors.

An Organic Optoelectronic Synapse with Multilevel Memory Enabled by Gate Modulation

Artificial synaptic devices are emerging as contenders for next-generation computing systems due to their combined advantages of self-adaptive learning mechanisms, high parallel computation capabilities, adjustable memory level, and energy efficiency. Optoelectronic devices are particularly notable for their responsiveness to both voltage inputs and light exposure, making them attractive for dynamic modulation. However, engineering devices with reconfigurable synaptic plasticity and multilevel memory within a singular configuration present a fundamental challenge. Here, we have established an organic transistor-based synaptic device that exhibits both volatile and nonvolatile memory characteristics, modulated through gate voltage together with light stimuli. Our device demonstrates a range of synaptic behaviors, including both short/long-term plasticity (STP and LTP) as well as STP-LTP transitions. Further, as an encoding unit, it delivers exceptional read current levels, achieving a program/erase current ratio exceeding 105, with excellent repeatability. Additionally, a prototype 4 × 4 matrix demonstrates potential in practical neuromorphic systems, showing capabilities in the perception, processing, and memory retention of image inputs.

Self-Assembled Monolayers for Interfacial Engineering in Solution-Processed Thin-Film Electronic Devices: Design, Fabrication, and Applications

Interfacial engineering has long been a vital means of improving thin-film device performance, especially for organic electronics, perovskites, and hybrid devices. It greatly facilitates the fabrication and performance of solution-processed thin-film devices, including organic field effect transistors (OFETs), organic solar cells (OSCs), perovskite solar cells (PVSCs), and organic light-emitting diodes (OLEDs). However, due to the limitation of traditional interfacial materials, further progress of these thin-film devices is hampered particularly in terms of stability, flexibility, and sensitivity. The deadlock has gradually been broken through the development of self-assembled monolayers (SAMs), which possess distinct benefits in transparency, diversity, stability, sensitivity, selectivity, and surface passivation ability. In this review, we first showed the evolution of SAMs, elucidating their working mechanisms and structure-property relationships by assessing a wide range of SAM materials reported to date. A comprehensive comparison of various SAM growth, fabrication, and characterization methods was presented to help readers interested in applying SAM to their works. Moreover, the recent progress of the SAM design and applications in mainstream thin-film electronic devices, including OFETs, OSCs, PVSCs and OLEDs, was summarized. Finally, an outlook and prospects section summarizes the major challenges for the further development of SAMs used in thin-film devices.

Hexakis-TIPS-Alkynylated Nonacenes: Persistent and Processible

Four substituted nonacenes were prepared and characterized by UV-vis and EPR spectroscopy and X-ray crystallography. The compounds are the most stable and soluble nonacenes to date - due to six strategically placed triisopropylsilyl(TIPS)-ethynyl groups. They are stable for several weeks in the solid state. In dilute solution their half-life is 5-9 h. Crystal structure analyses of two nonacenes prove their structures. A nonacene derivative was tested in a solution-processed transistor and exhibits ambipolar charge transport (μe =0.007 cm2 /Vs; μh =0.023 cm2 /Vs).

Azaarenes: 13 Rings in a Row by Cyclopentannulation

Cyclopentannulation was explored as a strategy to access large, stable azaarenes. Buchwald-Hartwig coupling of previously reported di- and tetrabrominated cyclopentannulated N,N'-dihydrotetraazapentacenes furnished stable azaarenes with up to 13 six-membered rings in a row and a length of 3.1 nm. Their optoelectronic and semi-conducting properties as well as their aromaticity were investigated.

Diazazethrene bisimide: a strongly electron-accepting π-system synthesized via the incorporation of both imide substituents and imine-type nitrogen atoms into zethrene

The development of highly electron-accepting π-systems is a fundamentally challenging issue despite their potential applications as high-performance n-type organic semiconductors, organic rechargeable batteries, and stable redox-active organocatalysts. Herein, we demonstrate that the incorporation of both imide substituents and imine-type nitrogen atoms into zethrene affords the strongly electron-accepting π-system diazazethrene bisimide (DAZBI). DAZBI has a low-lying LUMO (-4.3 eV vs. vacuum) and is readily reduced by the weak reductant l-ascorbic acid to afford the corresponding dihydro species. The injection of two electrons into DAZBI provides the corresponding dianion. These reduced species display remarkable stability, even under ambient conditions, and an intense red fluorescence. A DAZBI dimer, which was also synthesized, effectively accommodated four electrons upon electron injection.

N-Acenoacenes: Synthesis and Solid-State Properties

Four N-acenoacenes were synthesized and analyzed for their optoelectronic properties and solid-state packings. Two of the regioisomeric acridinoacridines are TIPS-ethynylated, whereas the other pair are Boc- and triflate substituted derivatives. The two TIPS-ethynyldiazaacenoacenes were processed into organic thin-film transistors with saturation hole mobilities reaching 2.9×10^-2  cm² (Vs)^-1 .

The Radical Anion, Dianion and Electron Transport Properties of Tetraiodotetraazapentacene

Tetraiodotetraazapentacene I₄ TAP, the last missing derivative in the series of halogenated silylated tetraazapentacenes, was synthesized via condensation chemistry from a TIPS-ethynylated diaminobenzothiadiazol in three steps. Single and double reduction furnished its air-stable monoanion and relatively air-stable dianion, both of which were characterized by crystallography. All three species are structurally and spectroscopically compared to non-halogenated TAP and Br₄ TAP. I₄ TAP is an n-channel material in thin-film transistors with average electron mobilities exceeding 1 cm² (Vs)^-1 .

Substituted Cyclopentannulated Tetraazapentacenes

Brominated pentannulated dihydrotetraazapentacenes were prepared by gold- or palladium-catalyzed 5-endo-dig cyclization of TIPS-ethynylated dihydrotetraazaacenes (TIPS = triisopropylsilyl). Post-functionalization was demonstrated by Sonogashira alkynylation and Rosenmund-von Braun cyanation. Calculations predict these species to act as n-type semiconductors, which was verified for two derivates through characterization in organic field-effect transistors.

Exploration of Alkyl Group Effects on the Molecular Packing of 5,15-Disubstituted Tetrabenzoporphyrins toward Efficient Charge-Carrier Transport

The high design flexibility of organic semiconductors should lead to diverse and complex electronic functions. However, currently available high-performance organic semiconductors are limited in variety; most of p-type materials are based on thienoacenes or related one-dimensionally (1D) extended π-conjugated systems. In an effort to expand the diversity of organic semiconductors, we are working on the development of tetrabenzoporphyrin (BP) derivatives as active-layer components of organic electronic devices. BP is characterized by its large, rigid two-dimensionally (2D) extended π-framework with high light absorptivity and therefore is promising as a core building unit of organic semiconductors for optoelectronic applications. Herein, we demonstrate that BP derivatives can afford field-effect hole mobilities of >4 cm² V^-1 s^-1 upon careful tuning of substituents. Comparative analysis of a series of 5,15-bis(n-alkyldimethylsilylethynyl)tetrabenzoporphyrins reveals that linear alkyl substituents disrupt the π-π stacking of BP cores, unlike the widely observed "fastener effect" for 1D extended π-systems. The n-octyl and n-dodecyl groups have the best balance between high solution processability and minimal π-π stacking disruption, leading to superior hole mobilities in solution-processed thin films. The resulting thin films show high thermal stability wherein the field-effect hole mobility stays above 1 cm² V^-1 s^-1 even after heating at 160 °C in air, reflecting the tight packing of large BP units. These findings will serve as a good basis for extracting the full potential of 2D extended π-frameworks and thus for increasing the structural or functional diversities of high-performance organic semiconductors.

High-performance five-ring-fused organic semiconductors for field-effect transistors

Organic molecular semiconductors have been paid great attention due to their advantages of low-temperature processability, low fabrication cost, good flexibility, and excellent electronic properties. As a typical example of five-ring-fused organic semiconductors, a single crystal of pentacene shows a high mobility of up to 40 cm² V^-1 s^-1, indicating its potential application in organic electronics. However, the photo- and optical instabilities of pentacene make it unsuitable for commercial applications. But, molecular engineering, for both the five-ring-fused building block and side chains, has been performed to improve the stability of materials as well as maintain high mobility. Here, several groups (thiophenes, pyrroles, furans, etc.) are introduced to design and replace one or more benzene rings of pentacene and construct novel five-ring-fused organic semiconductors. In this review article, ∼500 five-ring-fused organic prototype molecules and their derivatives are summarized to provide a general understanding of this catalogue material for application in organic field-effect transistors. The results indicate that many five-ring-fused organic semiconductors can achieve high mobilities of more than 1 cm² V^-1 s^-1, and a hole mobility of up to 18.9 cm² V^-1 s^-1 can be obtained, while an electron mobility of 27.8 cm² V^-1 s^-1 can be achieved in five-ring-fused organic semiconductors. The HOMO-LUMO levels, the synthesis process, the molecular packing, and the side-chain engineering of five-ring-fused organic semiconductors are analyzed. The current problems, conclusions, and perspectives are also provided.

Cyclodimers and Cyclotrimers of 2,3 -Bisalkynylated Anthracenes, Phenazines and Diazatetracenes

The synthesis of novel (N-)acene-based cyclooligomers is reported. Glaser-Hay coupling of the bisethynylated monomers results in cyclodimers and cyclotrimers that are separable by column and gel-permeation chromatographies. For the diazatetracene, the use of sec-butyl-silylethynyl groups is necessary to achieve solubility. Diazatetracene-based cyclodimers and cyclotrimers were used as semiconductors in thin-film transistors. Although their optoelectronic properties are quite similar, their electron mobilities in proof-of-concept thin-film transistors differ by an order of magnitude.

Carbazole-Fused Polycyclic Aromatics Enabled by Regioselective Scholl Reactions

The synthesis of new carbazole-fused polycyclic aromatics with interesting geometry and useful properties was explored using Scholl reactions. As found from the Scholl reactions of substrates having two carbazole units linked at different positions through o-phenylene, oxidative coupling of carbazole units occurred in a regioselective manner with new carbon-carbon bonds preferably formed at C3 and C4 in N-alkyl carbazoles. A new N-containing aromatic bowl was characterized by single-crystal X-ray crystallography, and new p-type organic semiconductors exhibited field effect mobility of up to 0.070 cm²  V^-1  s^-1 in solution-processed thin-film transistors.

Multi-level aggregation of conjugated small molecules and polymers: from morphology control to physical insights

Aggregation of molecules is a multi-molecular phenomenon occurring when two or more molecules behave differently from discrete molecules due to their intermolecular interactions. Moving beyond single molecules, aggregation usually demonstrates evolutive or wholly emerging new functionalities relative to the molecular components. Conjugated small molecules and polymers interact with each other, resulting in complex solution-state aggregates and solid-state microstructures. Optoelectronic properties of conjugated small molecules and polymers are sensitively determined by their aggregation states across a broad range of spatial scales. This review focused on the aggregation ranging from molecular structure, intermolecular interactions, solution-state assemblies, and solid-state microstructures of conjugated small molecules and polymers. We addressed the importance of such aggregation in filling the gaps from the molecular level to device functions and highlighted the multi-scale structures and properties at different scales. From the view of multi-level aggregation behaviors, we divided the whole process from the molecule to devices into several parts: molecular design, solvation, solution-state aggregation, crystal engineering, and solid-state microstructures. We summarized the progress and challenges of relationships between optoelectronic properties and multi-level aggregation. We believe aggregation science will become an interdisciplinary research field and serves as a general platform to develop future materials with the desired functions.

Regiocontrolled dimerization of asymmetric diazaheptacene derivatives toward X-shaped porous semiconductors

Conformationally rigid X-shaped PAHs are attracting interest due to their self-assembly into unique networks and as models to study through-space exciton and charge delocalization in one single molecule. We report here the synthesis of X-shaped PAHs by dimerization of diazaheptacene diimides. The diimide groups are employed to effectively direct the self-assembly into antiparallel dimer aggregates, which assist the compounds to undergo a regiocontrolled [4 + 4] dimerization, leading to an X-shaped conformation bearing electron-poor and -rich subunits. The resulting PAHs are found to pack in 2D layers with large open channels and infinite π⋯π arrays. Furthermore, these highly crystalline porous materials serve as electron-transporting materials in OFETs due to the long-range π-stacked arrays in the layers. This work presents a potentially generalizable strategy, which may provide a unique class of porous semiconductors for organic devices, taking advantage of their open channels.

The synthesis of conformationally rigid X-shaped PAHs by regiocontrolled cyclodimerization of diazaheptacene diimides is presented. The resulting porous materials exhibit enhanced semiconducting behaviors with large open channels.

Interface Engineering in Organic Field-Effect Transistors: Principles, Applications, and Perspectives

Heterogeneous interfaces that are ubiquitous in optoelectronic devices play a key role in the device performance and have led to the prosperity of today's microelectronics. Interface engineering provides an effective and promising approach to enhancing the device performance of organic field-effect transistors (OFETs) and even developing new functions. In fact, researchers from different disciplines have devoted considerable attention to this concept, which has started to evolve from simple improvement of the device performance to sophisticated construction of novel functionalities, indicating great potential for further applications in broad areas ranging from integrated circuits and energy conversion to catalysis and chemical/biological sensors. In this review article, we provide a timely and comprehensive overview of current efficient approaches developed for building various delicate functional interfaces in OFETs, including interfaces within the semiconductor layers, semiconductor/electrode interfaces, semiconductor/dielectric interfaces, and semiconductor/environment interfaces. We also highlight the major contributions and new concepts of integrating molecular functionalities into electrical circuits, which have been neglected in most previous reviews. This review will provide a fundamental understanding of the interplay between the molecular structure, assembly, and emergent functions at the molecular level and consequently offer novel insights into designing a new generation of multifunctional integrated circuits and sensors toward practical applications.

BN-Embedded Tetrabenzopentacene: A Pentacene Derivative with Improved Stability

Considerable efforts have been devoted to achieving stable acene derivatives for electronic applications; however, the instability is still a major issue for such derivatives. To achieve higher stability with minimum structural change, CC units in the acenes were replaced with isoelectronic BN units to produce a novel BN-embedded tetrabenzopentacene (BNTBP). BNTBP, with a planar structure, is highly stable to air, moisture, light, and heat. Compared with its carbon analogue tetrabenzopentacene (TBP), BN embedment lowered the highest occupied molecular orbital (HOMO) energy level of BNTBP, changed the orbital distribution, and decreased the HOMO orbital coefficients at the central carbon atoms, which stabilize BNTBP molecules upon exposure to oxygen and sunlight. The single-crystal microribbons of BNTBP exhibited good performance in field-effect transistors (FETs). The high stability and good mobility of BNTBP indicates that BN incorporation is an effective approach to afford stable large-sized acenes with desired properties.

An Ethynylene-Bridged Pentacene Dimer: Two-Step Synthesis and Charge-Transport Properties

A rigid and planar ethynylene-bridged pentacene dimer (PenD) was synthesized from pentacenequinone in two steps, skipping the conventional stepwise approach. A brickwork motif in the single crystal shows two-dimensionally extended electronic interaction in the solid state. Highly crystalline dip-coated films exhibited average hole mobility of 0.24 cm²  V^-1  s^-1 , comparable to that of the single-crystal organic field-effect transistors. This discovery and understanding of the reaction for the facile synthesis of ethynylene-bridged π-conjugated systems enables to the synthesis of a wide range of organic semiconducting materials.

Halogenated Tetraazapentacenes with Electron Mobility as High as 27.8 cm2 V-1 s-1 in Solution-Processed n-Channel Organic Thin-Film Transistors

Molecular engineering of tetraazapentacene with different numbers of fluorine and chlorine substituents fine-tunes the frontier molecular orbitals, molecular vibrations, and π-π stacking for n-type organic semiconductors. Among the six halogenated tetraazapentacenes studied herein, the tetrachloro derivative (4Cl-TAP) in solution-processed thin-film transistors exhibits electron mobility of 14.9 ± 4.9 cm² V^-1 s^-1 with a maximum value of 27.8 cm² V^-1 s^-1 , which sets a new record for n-channel organic field-effect transistors. Computational studies on the basis of crystal structures shed light on the structure-property relationships for organic semiconductors. First, chlorine substituents slightly decrease the reorganization energy of the tetraazapentacene whereas fluorine substituents increase the reorganization energy as a result of fine-tuning molecular vibrations. Second, the electron transfer integral is very sensitive to subtle changes in the 2D π-stacking with brickwork arrangement. The unprecedentedly high electron mobility of 4Cl-TAP is attributed to the reduced reorganization energy and enhanced electron transfer integral as a result of modification of tetraazapentacene with four chlorine substituents.

Multiscale assembly of solution-processed organic electronics: the critical roles of confinement, fluid flow, and interfaces

Organic semiconducting small molecules and polymers provide a rich phase space for investigating the fundamentals of molecular and hierarchical assembly. Stemming from weak intermolecular interactions, their assembly sensitively depends on processing conditions, which in turn drastically modulate their electronic properties. Much work has gone into molecular design strategies that maximize intermolecular interactions and encourage close packing. Less understood, however, is the non-equilibrium assembly that occurs during the fabrication process (especially solution coating and printing) which is critical to determining thin film morphology across length scales. This encompasses polymorphism and molecular packing at molecular scale, assembly of π-bonding aggregates at the tens of nanometers scale, and the formation of domains at the micron-millimeter device scale. Here, we discuss three phenomena ubiquitous in solution processing of organic electronic thin films: the confinement effect, fluid flows, and interfacial assembly and the role they play in directing assembly. This review focuses on the mechanistic understanding of how assembly outcomes couple closely to the solution processing environment, supported by salient examples from the recent literature.

N-Phenylated N-Heteroacenes: Synthesis, Structures, and Properties

Herein, two novel N-phenylated N-heteroacenes (1 and 2) are reported, along with details of their synthesis, structures, and properties. Compound 1 is a N-hetero analogue of rubrene, but differs from rubrene by having a bent backbone and behaving as an insulator in the solid state owing to the lack of π-π interactions. Compound 2 is a N-hetero analogue of 6,13-diphenylpentacene (DPP) with essentially the same molecular geometry and crystal packing as DPP, but exhibiting a field effect mobility higher than that of DPP by two orders of magnitude.

Synthesis, Structure, and Properties of Tetrabenzo[7]circulene

Tetrabenzo[7]circulene, a new member of aromatic saddles, was conveniently synthesized from 2-(1-naphthoyl)benzoic acid with the seven-membered ring constructed at an early stage of the synthesis. This method, upon minor modification, was also useful for synthesis of thiophene-annulated [7]circulenes. The structures of tetrabenzo[7]circulene and [7]circulene were compared in terms of symmetry, flexibility, and curvature on the basis of DFT calculations and X-ray crystallography. It was also found that tetrabenzo[7]circulene functioned as a p-type semiconductor in thin-film transistors and cocrystallized with C₆₀.

Engineering Thin Films of a Tetrabenzoporphyrin toward Efficient Charge-Carrier Transport: Selective Formation of a Brickwork Motif

Tetrabenzoporphyrin (BP) is a p-type organic semiconductor characterized by the large, rigid π-framework, excellent stability, and good photoabsorption capability. These characteristics make BP and its derivatives prominent active-layer components in organic electronic and optoelectronic devices. However, the control of the solid-state arrangement of BP frameworks, especially in solution-processed thin films, has not been intensively explored, and charge-carrier mobilities observed in BP-based materials have stayed relatively low as compared to those in the best organic molecular semiconductors. This work concentrates on engineering the solid-state packing of a BP derivative, 5,15-bis(triisopropylsilyl)ethynyltetrabenzoporphyrin (TIPS-BP), toward achieving efficient charge-carrier transport in its solution-processed thin films. The effort leads to the selective formation of a brickwork packing that has two dimensionally extended π-staking. The maximum field-effect hole mobility in the resulting films reaches 1.1 cm² V^-1 s^-1, which is approximately 14 times higher than the record value for pristine free-base BP (0.070 cm² V^-1 s^-1). This achievement is enabled mainly through the optimization of three factors; namely, deposition process, cast solvent, and self-assembled monolayer that constitutes the dielectric surface. On the other hand, polarized-light microscopy and grazing-incident wide-angle X-ray diffraction analyses show that there remains some room for improvement in the in-plane homogeneity of molecular alignment, suggesting even higher charge-carrier mobilities can be obtained upon further optimization. These results will provide a useful basis for the polymorph engineering and morphology optimization in solution-processed organic molecular semiconductors.

Multifunctional Hybrid Multilayer Gate Dielectrics with Tunable Surface Energy for Ultralow-Power Organic and Amorphous Oxide Thin-Film Transistors

For large-area, printable, and flexible electronic applications using advanced semiconductors, novel dielectric materials with excellent capacitance, insulating property, thermal stability, and mechanical flexibility need to be developed to achieve high-performance, ultralow-voltage operation of thin-film transistors (TFTs). In this work, we first report on the facile fabrication of multifunctional hybrid multilayer gate dielectrics with tunable surface energy via a low-temperature solution-process to produce ultralow-voltage organic and amorphous oxide TFTs. The hybrid multilayer dielectric materials are constructed by iteratively stacking bifunctional phosphonic acid-based self-assembled monolayers combined with ultrathin high-k oxide layers. The nanoscopic thickness-controllable hybrid dielectrics exhibit the superior capacitance (up to 970 nF/cm²), insulating property (leakage current densities <10^-7 A/cm²), and thermal stability (up to 300 °C) as well as smooth surfaces (root-mean-square roughness <0.35 nm). In addition, the surface energy of the hybrid multilayer dielectrics are easily changed by switching between mono- and bifunctional phosphonic acid-based self-assembled monolayers for compatible fabrication with both organic and amorphous oxide semiconductors. Consequently, the hybrid multilayer dielectrics integrated into TFTs reveal their excellent dielectric functions to achieve high-performance, ultralow-voltage operation (< ± 2 V) for both organic and amorphous oxide TFTs. Because of the easily tunable surface energy, the multifunctional hybrid multilayer dielectrics can also be adapted for various organic and inorganic semiconductors, and metal gates in other device configurations, thus allowing diverse advanced electronic applications including ultralow-power and large-area electronic devices.

Flexible All-organic, All-solution Processed Thin Film Transistor Array with Ultrashort Channel

Shrinking the device dimension has long been the pursuit of the semiconductor industry to increase the device density and operation speed. In the application of thin film transistors (TFTs), all-organic TFT arrays made by all-solution process are desired for low cost and flexible electronics. One of the greatest challenges is how to achieve ultrashort channel through a cost-effective method. In our study, ultrashort-channel devices are demonstrated by direct inkjet printing conducting polymer as source/drain and gate electrodes without any complicated substrate’s pre-patterning process. By modifying the substrate’s wettability, the conducting polymer’s contact line is pinned during drying process which makes the channel length well-controlled. An organic TFT array of 200 devices with 2 μm channel length is fabricated on flexible substrate through all-solution process. The simple and scalable process to fabricate high resolution organic transistor array offers a low cost approach in the development of flexible and wearable electronics.

Electron Mobility Exceeding 10 cm(2) V(-1) s(-1) and Band-Like Charge Transport in Solution-Processed n-Channel Organic Thin-Film Transistors

Solution-processed n-channel organic thin-film transistors (OTFTs) that exhibit a field-effect mobility as high as 11 cm(2) V(-1) s(-1) at room temperature and a band-like temperature dependence of electron mobility are reported. By comparison of solution-processed OTFTs with vacuum-deposited OTFTs of the same organic semiconductor, it is found that grain boundaries are a key factor inhibiting band-like charge transport.

Benzo[4,5]cyclohepta[1,2-b]fluorene: an isomeric motif for pentacene containing linearly fused five-, six- and seven-membered rings

A new class of conjugated polycyclic molecules containing a C₆–C₅–C₆–C₇–C₆ polycylic framework was synthesized. Both experiments and calculations show different electron structures in comparison to their pentacene isomers.

Benzo[4,5]cyclohepta[1,2-b]fluorene (5a), a new π-conjugated polycyclic hydrocarbon containing linearly fused six-, five-, six-, seven- and six-membered rings (C₆–C₅–C₆–C₇–C₆), was designed and its stable derivatives 5b and 5c were synthesized. With 22 π electrons, 5a is an isomer of pentacene with quinoidal, dipolar ionic and diradical resonance forms. Molecules 5b and 5c were experimentally investigated with cyclic voltammetry, electronic absorption spectroscopy and X-ray crystallographic analysis, and theoretically studied by calculating the NICS value, diradical character and dipole moment. A comparison of 5a–c with pentacene and other pentacene analogues containing linearly fused five- or seven-membered rings was also conducted and discussed. It was found that 5b behaved as a p-type organic semiconductor in solution-processed thin film transistors with a field effect mobility of up to 0.025 cm² V^–1 s^–1.