Renewable-juglone-based high-performance sodium-ion batteries

Metal-organic framework derived crystalline nanocarbon for Fenton-like reaction

Nanoporous carbons with tailorable nanoscale texture and long-range ordered structure are promising candidates for energy, environmental and catalytic applications, while the current synthetic methods do not allow elaborate control of local structure. Here we report a salt-assisted strategy to obtain crystalline nanocarbon from direct carbonization of metal-organic frameworks (MOFs). The crystalline product maintains a highly ordered two-dimensional (2D) stacking mode and substantially differs from the traditional weakly ordered patterns of nanoporous carbons upon high-temperature pyrolysis. The MOF-derived crystalline nanocarbon (MCC) comes with a high level of nitrogen and oxygen terminating the 2D layers and shows an impressive performance as a carbocatalyst in Fenton-like reaction for water purification. The successful preparation of MCC illustrates the possibility to discover other crystalline heteroatom-doped carbon phases starting from correctly designed organic precursors and appropriate templating reactions.

High Capacity and Fast Kinetics Enabled by Metal-Doping in Prussian Blue Analogue Cathodes for Sodium-Ion Batteries

Prussian blue analogues (PBAs) have gained tremendous attention as promising low-cost electrochemically-tunable electrode materials, which can accommodate large Na+ ions with attractive specific capacity and charge-discharge kinetics. However, poor cycling stability caused by lattice strain and volume change remains to be improved. Herein, metal-doping strategy has been demonstrated in FeNiHCF, Na1.40Fe0.90Ni0.10[Fe(CN)6]0.85 ⋅ 1.3H2O, delivering a capacity as high as 148 mAh g-1 at 10 mA g-1. At an exceptionally high rate of 25.6 A g-1, a reversible capacity of ~55 mAh g-1 still can be obtained with a very small capacity decay rate of 0.02 % per cycle for 1000 cycles, considered one of the best among all metal-doped PBAs. This exhibits the stabilizing effect of Ni doping which enhances structural stability and long-term cyclability. In situ synchrotron X-ray diffraction reveals an extremely small (~1 %) change in unit cell parameters. The Ni substitution is found to increase the electronic conductivity and redox activity, especially at the low-spin (LS) Fe center due to inductive effect. This larger capacity contribution from LS Fe2+C6/Fe3+C6 redox couple is responsible for stable high-rate capability of FeNiHCF. The insight gained in this work may pave the way for the design of other high-performance electrode materials for sustainable sodium-ion batteries.

Structural Isomers: Small Change with Big Difference in Anion Storage

Organic electrode materials are promising for batteries. However, the reported organic electrodes are often facing the challenges of low specific capacity, low voltage, poor rate capability and vague charge storage mechanisms, etc. Isomers are good platform to investigate the charge storage mechanisms and enhance the performance of batteries, which, however, have not been focused in batteries. Herein, two isomers are reported for batteries. As a result, the isomer tetrathiafulvalene (TTF) could store two monovalent anions reversibly, deriving an average discharge voltage of 1.05 V and a specific capacity of 220 mAh g-1 at a current density of 2 C. On the other hand, the other isomer tetrathianaphthalene could only reversibly store one monovalent anion and upon further oxidation, it would undergo an irreversible solid-state molecular rearrangement to TTF. The molecular rearrangement was confirmed by electrochemical performances, X-ray diffraction patterns, nuclear magnetic resonance spectra, and 1H detected heteronuclear multiple bond correlation spectra. These results suggested the small structural change could lead to a big difference in anion storage, and we hope this work will stimulate more attention to the structural design for boosting the performance of organic batteries.

Modular Metal-Quinone Networks with Tunable Architecture and Functionality

Nanostructured materials with tunable structures and functionality are of interest in diverse areas. Herein, metal ions are coordinated with quinones through metal-acetylacetone coordination bonds to generate a class of structurally tunable, universally adhesive, hydrophilic, and pH-degradable materials. A library of metal-quinone networks (MQNs) is produced from five model quinone ligands paired with nine metal ions, leading to the assembly of particles, tubes, capsules, and films. Importantly, MQNs show bidirectional pH-responsive disassembly in acidic and alkaline solutions, where the quinone ligands mediate the disassembly kinetics, enabling temporal and spatial control over the release of multiple components using multilayered MQNs. Leveraging this tunable release and the inherent medicinal properties of quinones, MQN prodrugs with a high drug loading (>89 wt %) are engineered using doxorubicin for anti-cancer therapy and shikonin for the inhibition of the main protease in the SARS-CoV-2 virus.

Advances in Low-Temperature Dual-Ion Batteries

Fabricating rechargeable batteries for low-temperature (LT) applications is highly desired at high altitudes/latitudes, aerospace/subsea exploration, and defense. Lithium-ion batteries (LIBs) suffer from severe loss of capacity and energy/power density at sub-zero temperatures caused by the sluggish kinetics. By utilizing both cations and anions as charge carriers, dual-ion batteries (DIBs) become a nascent battery system for LT tolerance by overcoming ion-desolvation during discharge. Here, we summarize recent advances in LT DIBs. To begin with, distinctive advantages of DIBs at LTs are highlighted compared to LIBs, with a special attention to anion (de-)intercalation, and the in-depth understanding of key challenges for LT operation is discussed. The next major section deals with the exciting progress on the advanced strategies to improve the LT performance of DIBs, including alternative electrode materials, reliable electrolyte formulations, and construction of interphase protective layers. Finally, prospects and future developments in this exciting field of LT DIBs are suggested.

Ultrastable Bioderived Organic Anode Induced by Synergistic Coupling of Binder/Carbon-Network for Advanced Potassium-Ion Storage

Bioderived molecules have been identified as viable anodes for organic potassium-ion batteries (OPIBs) due to the abundance of the necessary natural resources, their high capacity, and their sustainability. However, the high solubility and the inherent nonconductivity cause serious capacity decay and large voltage hysteresis. Here, the biomass molecule juglone was cross-linked with a carbon nanotube network, coupling and cooperating with sodium alginate binder (J@CNT-SA), and was proposed to inhibit small molecule dissolution via weak intermolecular interactions. The synergistic effect of hydrogen bonding and π-π stacking is proven for its outstanding reversible high capacities (262 mA h g^-1 at 0.05 A g^-1), and a remarkable long life span with capacity retention of 77% over 5000 cycles. Further in situ Fourier transform infrared spectroscopy (FTIR) was performed to reveal the electrochemical mechanism. The feasibility of juglone as an anode for PIBs paves the way for other natural organic small molecules to be investigated as potential energy storage materials.

Construction of Large Non-Localized π-Electron System for Enhanced Sodium-Ion Storage

Organic electrode materials with the advantages of renewability, environment-friendliness, low cost, and high capacity have received widespread attention in recent years for sodium-ion batteries. However, small molecular organic materials suffer from issues such as low conductivity and the high dissolution rate in electrolytes. Herein, a phthalocyanine derivative (TPcDS) with a large non-localized π-electron system, obtained through thermodynamic polymerization of 4-aminophthalonitrile (AP) monomers, is designed to address these issues. According to the density function theory calculation, six sodium ions can be attracted by one polymer molecule, indicating a high theoretical capacity of 375 mA h g^-1 . The TPcDS molecule realizes sodium storage through a non-localized π-electron system of phthalocyanine macrocycles. When employed as an anode material for sodium-ion batteries, the functional groups of phthalocyanine macrocycles, such as CN groups in TPcDS, experience obviously reversible structural variation upon discharge/charge. A high reversible capacity of 364 mAh g^-1 is achieved at a current density of 0.05 A g^-1 , and a charge capacity of as high as 246 mAh g^-1 is still maintained after 500 cycles at 0.1 A g^-1 . This work provides an effective strategy for the design and synthesis of new oligomeric organic electrode materials.

Gifts from Nature: Bio-Inspired Materials for Rechargeable Secondary Batteries

Materials in nature have evolved to the most efficient forms and have adapted to various environmental conditions over tens of thousands of years. Because of their versatile functionalities and environmental friendliness, numerous attempts have been made to use bio-inspired materials for industrial applications, establishing the importance of biomimetics. Biomimetics have become pivotal to the search for technological breakthroughs in the area of rechargeable secondary batteries. Here, the characteristics of bio-inspired materials that are useful for secondary batteries as well as their benefits for application as the main components of batteries (e.g., electrodes, separators, and binders) are discussed. The use of bio-inspired materials for the synthesis of nanomaterials with complex structures, low-cost electrode materials prepared from biomass, and biomolecular organic electrodes for lithium-ion batteries are also introduced. In addition, nature-derived separators and binders are discussed, including their effects on enhancing battery performance and safety. Recent developments toward next-generation secondary batteries including sodium-ion batteries, zinc-ion batteries, and flexible batteries are also mentioned to understand the feasibility of using bio-inspired materials in these new battery systems. Finally, current research trends are covered and future directions are proposed to provide important insights into scientific and practical issues in the development of biomimetics technologies for secondary batteries.

Ti3 C2 Tx MXene Conductive Layers Supported Bio-Derived Fex -1 Sex /MXene/Carbonaceous Nanoribbons for High-Performance Half/Full Sodium-Ion and Potassium-Ion Batteries

Owing to their cost-effectiveness and high energy density, sodium-ion batteries (SIBs) and potassium-ion batteries (PIBs) are becoming the leading candidates for the next-generation energy-storage devices replacing lithium-ion batteries. In this work, a novel Fe_{x -1} Se_x heterostructure is prepared on fungus-derived carbon matrix encapsulated by 2D Ti₃ C₂ T_x MXene highly conductive layers, which exhibits high specific sodium ion (Na⁺ ) and potassium ion (K⁺ ) storage capacities of 610.9 and 449.3 mAh g^-1 at a current density of 0.1 A g^-1 , respectively, and excellent capacity retention at high charge-discharge rates. MXene acts as conductive layers to prevent the restacking and aggregation of Fe_{x -1} Se_x sheets on fungus-derived carbonaceous nanoribbons, while the natural fungus functions as natural nitrogen/carbon source to provide bionic nanofiber network structural skeleton, providing additional accessible pathways for the high-rate ion transport and satisfying surface-driven contribution ratios at high sweep rates for both Na/K ions storages. In addition, in situ synchrotron diffraction and ex situ X-ray photoelectron spectroscopy measurements are performed to reveal the mechanisms of storage and de-/alloying conversion process of Na⁺ in the Fe_{x -1} Se_x /MXene/carbonaceous nanoribbon heterostructure. As a result, the assembled Na/K full cells containing MXene-supported Fe_{x -1} Se_x @carbonaceous anodes possess stable large-ion storage capabilities.

Advanced Tri-Layer Carbon Matrices with π-π Stacking Interaction for Binder-Free Lithium-Ion Storage

Enabling materials with distinct features toward achieving high-performance energy storage devices is of huge importance but highly challenging. Commercial carbon cloth (CC), because of its appealing chemical and mechanical properties, has been proven to be an excellent conductive substrate for active electrode materials. However, its performance is notably poor when directly used as an electrode in energy storage, due to its low theoretical capacity and surface area. Herein, we successfully endow the CC with enhanced storage capacity via formation of a π-π stacking interaction by integrating electrochemically activated CC (denoted CC/ACC) with biomass-derived carbon (BMDC) (denoted π-CC/ECC@BMDC). The π-CC/ECC@BMDC electrode displays excellent storage performance with a high capacity of 2.53 mAh cm^-2 under 0.2 mA cm^-2 when used as anode material for lithium ion batteries (LIBs). Due to the induction energy, the negatively charged molecules of the CC/ACC functional groups interact with the BMDC during carbonization, creating the π-π stacking interaction. Based on first-principles calculations, the structural design of the tri-layer carbon enables the movement of electrons around the π-π stacking interaction, which significantly facilitates rapid transportation of electrons, creates three-dimensional (3D) ion tunnels for fast transportation of ions, and improves the electrode's mechanical and electronic properties.

A novel and fast method to prepare a Cu-supported α-Sb2S3@CuSbS2 binder-free electrode for sodium-ion batteries

Antimony sulfide (Sb₂S₃) is a promising anode material for sodium-ion batteries due to its low cost and high theoretical specific capacity. However, poor stability and a complex preparation process limit its large-scale application. Herein, we prepare a binder-free composite electrode composed of amorphous (α-) Sb₂S₃ and copper antimony sulfide (CuSbS₂) through a simple closed-space sublimation (CSS) method. When applied as the anode in sodium-ion batteries, the α-Sb₂S₃@CuSbS₂ electrode exhibits excellent performance with a high discharge capacity of 506.7 mA h g⁻¹ at a current density of 50 mA g⁻¹ after 50 cycles. The satisfactory electrochemical performance could be ascribed to the α-Sb₂S₃–CuSbS₂ composite structure and binder-free electrode architecture, which not only retain the structural stability of the electrode but also improve the electrical conductivity. Consequently, CSS, as a scalable and environmentally friendly method, can produce a binder-free electrode in just a few minutes, demonstrating its great potential in the industrial production of sodium-ion batteries. This study may open an avenue to preparing binder-free commercial electrodes.

Antimony sulfide (Sb₂S₃) is a promising anode material for sodium-ion batteries due to its low cost and high theoretical specific capacity.

Bioderived Molecular Electrodes for Next-Generation Energy-Storage Materials

Nature-derived organic small molecules, as energy-storage materials, provide low-cost, recyclable, and non-toxic alternatives to inorganic and polymer electrodes for lithium-/sodium-ion batteries and beyond. Some organic carbonyl compounds have met or exceeded the voltages and gravimetric storage capacities achieved by traditional transition metal oxide-based compounds due to the metal-ion coupled redox and facile electron-transport capability of functional groups. Stability issues that previously limited the capacity of small organic molecules can be remediated with reactions to form insoluble salts, noncovalent interactions (hydrogen bonding and π stacking), loading onto substrates, and careful electrolyte selection. The cost-effectiveness and sustainability of organic materials may further be improved by employing porphyrin-based electrodes and multivalent-ion batteries utilizing abundant metals, such as aluminum and zinc. Finally, redox flow batteries take advantage of the solubility of organics for the development of scalable, high power density, and safe energy-storage devices based on aqueous electrolytes. Herein, the advantages and prospects of small molecule-based electrodes, with a focus on nature-derived organic and biomimetic materials, to realize the next-generation of green battery chemistry are reviewed.

Sustainable Battery Materials from Biomass

Sustainable sources of energy have been identified as a possible way out of today's oil dependency and are being rapidly developed. In contrast, storage of energy to a large extent still relies on heavy metals in batteries. Especially when built from biomass-derived organics, organic batteries are promising alternatives and pave the way towards truly sustainable energy storage. First described in 2008, research on biomass-derived electrodes has been taken up by a multitude of researchers worldwide. Nowadays, in principle, electrodes in batteries could be composed of all kinds of carbonized and noncarbonized biomass: On one hand, all kinds of (waste) biomass may be carbonized and used in anodes of lithium- or sodium-ion batteries, cathodes in metal-sulfur or metal-oxygen batteries, or as conductive additives. On the other hand, a plethora of biomolecules, such as quinones, flavins, or carboxylates, contain redox-active groups that can be used as redox-active components in electrodes with very little chemical modification. Biomass-based binders can replace toxic halogenated commercial binders to enable a truly sustainable future of energy storage devices. Besides the electrodes, electrolytes and separators may also be synthesized from biomass. In this Review, recent research progress in this rapidly emerging field is summarized with a focus on potentially fully biowaste-derived batteries.

Materials Strategies and Device Architectures of Emerging Power Supply Devices for Implantable Bioelectronics

Implantable bioelectronics represent an emerging technology that can be integrated into the human body for diagnostic and therapeutic functions. Power supply devices are an essential component of bioelectronics to ensure their robust performance. However, conventional power sources are usually bulky, rigid, and potentially contain hazardous constituent materials. The fact that biological organisms are soft, curvilinear, and have limited accommodation space poses new challenges for power supply systems to minimize the interface mismatch and still offer sufficient power to meet clinical-grade applications. Here, recent advances in state-of-the-art nonconventional power options for implantable electronics, specifically, miniaturized, flexible, or biodegradable power systems are reviewed. Material strategies and architectural design of a broad array of power devices are discussed, including energy storage systems (batteries and supercapacitors), power devices which harvest sources from the human body (biofuel cells, devices utilizing biopotentials, piezoelectric harvesters, triboelectric devices, and thermoelectric devices), and energy transfer devices which utilize sources in the surrounding environment (ultrasonic energy harvesters, inductive coupling/radiofrequency energy harvesters, and photovoltaic devices). Finally, future challenges and perspectives are given.

Edible fungus slag derived nitrogen-doped hierarchical porous carbon as a high-performance adsorbent for rapid removal of organic pollutants from water

In this work, agricultural waste edible fungus slag derived nitrogen-doped hierarchical porous carbon (EFS-NPC) was prepared by a simple carbonization and activation process. Owing to the biodegradation and infiltrability of hyphae, this EFS-NPC possessed an ultra-high specific surface area (3342 m²/g), large pore volume (1.84 cm³/g) and abundant micropores and mesopores. The obtained EFS-NPC could effectively adsorb bisphenol A (BPA) with the maximal adsorption capacity of 1249 mg/g and the removal process reached 89.9% of the equilibrium uptake in the first 0.5 h. Besides, the EFS-NPC showed much better removal performance towards 2,4-dichlorophenol (2,4-DCP) and methylene blue (MB) than commercial activated carbons (Norit RO 0.8 and DARCO granular activated carbon). Furthermore, adsorption isotherms, thermodynamics and kinetics researches indicated that the adsorption process of BPA was monolayer, exothermic and spontaneous. This research has given evidence that the low-cost EFS-NPC can serve as a high-efficient adsorbent for removing organic contaminants from water.

Electrode Materials for High-Performance Sodium-Ion Batteries

Sodium ion batteries (SIBs) are being billed as an economical and environmental alternative to lithium ion batteries (LIBs), especially for medium and large-scale stationery and grid storage. However, SIBs suffer from lower capacities, energy density and cycle life performance. Therefore, in order to be more efficient and feasible, novel high-performance electrodes for SIBs need to be developed and researched. This review aims to provide an exhaustive discussion about the state-of-the-art in novel high-performance anodes and cathodes being currently analyzed, and the variety of advantages they demonstrate in various critically important parameters, such as electronic conductivity, structural stability, cycle life, and reversibility.

Recent Progress on Organic Electrodes Materials for Rechargeable Batteries and Supercapacitors

Rechargeable batteries are essential elements for many applications, ranging from portable use up to electric vehicles. Among them, lithium-ion batteries have taken an increasing importance in the day life. However, they suffer of several limitations: safety concerns and risks of thermal runaway, cost, and high carbon footprint, starting with the extraction of the transition metals in ores with low metal content. These limitations were the motivation for an intensive research to replace the inorganic electrodes by organic electrodes. Subsequently, the disadvantages that are mentioned above are overcome, but are replaced by new ones, including the solubility of the organic molecules in the electrolytes and lower operational voltage. However, recent progress has been made. The lower voltage, even though it is partly compensated by a larger capacity density, may preclude the use of organic electrodes for electric vehicles, but the very long cycling lives and the fast kinetics reached recently suggest their use in grid storage and regulation, and possibly in hybrid electric vehicles (HEVs). The purpose of this work is to review the different results and strategies that are currently being used to obtain organic electrodes that make them competitive with lithium-ion batteries for such applications.

Electrolytes and Electrolyte/Electrode Interfaces in Sodium-Ion Batteries: From Scientific Research to Practical Application

Sodium-ion batteries (SIBs) have drawn considerable interest as power-storage devices owing to the wide abundance of their constituents and low cost. To realize a high performance-price ratio, the cathode and anode materials must be optimized. As essential components of SIBs, electrolytes should have wide electrochemical windows, high thermal stability, and exceptional ionic conductivity. Therefore, improved electrolytes, based on various materials and compositions, are developed to meet the practical demands of SIBs, including organic electrolytes, ionic liquids, aqueous, solid electrolytes, and hybrid electrolytes. Although mature organic electrolytes are currently used in production, aqueous and solid electrolytes show advantages for future applications, as discussed here in detail. Current efforts in modifying electrolytes to optimize their interfacial compatibility with electrodes, leading to longer battery lifetimes and greater safety, are described. The advanced characterization techniques used to investigate the properties of electrolytes and interfaces are introduced, and the reaction processes and degradation mechanisms of SIBs are revealed. Furthermore, the practical prospects of SIBs promoted by high-quality electrolytes appropriately matched with electrodes are predicted and directions for developing next-generation SIBs are suggested.

Wearable and flexible electronics for continuous molecular monitoring

Wearable biosensors have received tremendous attention over the past decade owing to their great potential in predictive analytics and treatment toward personalized medicine. Flexible electronics could serve as an ideal platform for personalized wearable devices because of their unique properties such as light weight, low cost, high flexibility and great conformability. Unlike most reported flexible sensors that mainly track physical activities and vital signs, the new generation of wearable and flexible chemical sensors enables real-time, continuous and fast detection of accessible biomarkers from the human body, and allows for the collection of large-scale information about the individual's dynamic health status at the molecular level. In this article, we review and highlight recent advances in wearable and flexible sensors toward continuous and non-invasive molecular analysis in sweat, tears, saliva, interstitial fluid, blood, wound exudate as well as exhaled breath. The flexible platforms, sensing mechanisms, and device and system configurations employed for continuous monitoring are summarized. We also discuss the key challenges and opportunities of the wearable and flexible chemical sensors that lie ahead.

Na3V2(PO4)3: an advanced cathode for sodium-ion batteries

Sodium-ion batteries (SIBs) are considered to be the most promising electrochemical energy storage devices for large-scale grid and electric vehicle applications due to the advantages of resource abundance and cost-effectiveness. The electrochemical performance of SIBs largely relies on the intrinsic chemical properties of the cathodic materials. Among the various cathodes, rhombohedral Na3V2(PO4)3 (NVP), a typical sodium super ionic conductor (NASICON) compound, is very popular owing to its high Na+ mobility and firm structural stability. However, the relatively low electronic conductivity makes the theoretical capacity of NVP cathodes unviable even at low rates, not to mention the high rate of charging/discharging. This is a major drawback of NVPs, limiting their future large-scale applications. Herein, a comprehensive review of the recent progresses made in NVP fabrication has been presented, mainly including the strategies of developing NVP/carbon hybrid materials and elemental doping to improve the electronic conductivity of NVP cathodes and designing 3D porous architectures to enhance Na-ion transportation. Moreover, the application of NVP cathodic materials in Na-ion full batteries is summarized, too. Finally, some remarks are made on the challenges and perspectives for the future development of NVP cathodes.

Unusual Capacity Increases with Cycling for Ladder-Type Microporous Polymers

Microporous polymers using triptycene vertices and various ladder-type benzimidazole linkers are synthesized and tested as lithium-ion battery anodes. An unusual increase in performance is observed upon cycling, affording high capacities of 783 and 737 mAh g^-1 for a perylene derivative and the pyromellitic derivative after 1000 cycles. The high performance of these materials after cycling is attributed to favorable electrode morphology and high crystallinity for perylene derivative, and the presence of charge carriers for pyromellitic derivative. By studying the effect of various linkers on the electrochemical performance, structure-property relationships are proposed that can be used to guide the development of high-performance materials for lithium-ion batteries.

Pseudocapacitance electrode and asymmetric supercapacitor based on biomass juglone/activated carbon composites

A novel electrode material incorporating renewable biomass-derived juglone biomolecules with commercial activated carbon (AC) granules has been through simple ultrasonic dispersion and dissolution–recrystallization and was found to exhibit good electrochemical performance. The juglone biomolecules are prepared by an ultrasound-assisted extraction method from abandoned walnut peel, which decreases pollution and increases economic efficiency. Through the dissolution–recrystallization process with AC, a hierarchical structure with nanosized juglone particles was obtained, and the AC particles worked as scaffolding to strengthen the slight biomolecules, thus expanding the active sites and effectively reducing the dissolution of the active materials. The pseudocapacitance fading mechanism was investigated by ex situ FTIR measurement and the porous structure ensures that the composite electrode has an enhanced specific capacitance of 248 F g⁻¹ compared to 172.8 and 62.5 F g⁻¹ for the respective AC and juglone samples. Besides, the excellent cyclic stability (retained 75% after 3000 charge–discharge cycles) was demonstrated. The highest area-specific capacitance of the composites was 1300 mF cm⁻². An asymmetric supercapacitor based on this composite electrode was assembled with an AC electrode as the counter electrode and exhibited good cyclic performance at a voltage of 1.2 V (retained 77% after 3000 charge–discharge cycles), which provides a high energy density of 12 W h kg⁻¹ at a power density of 0.18 kW kg⁻¹ and a high power density of 2 kW kg⁻¹ at an energy density of 9 W h kg⁻¹. This work explores the application of biomolecule-based composites in energy storage devices and provides a potential strategy for constructing environmentally friendly electrodes.

A strategy for transforming abandoned walnut peel to excellent pseudocapacitance material. The activated carbon reshapes and anchors the juglone, which combined the EDLC and pseudocapacitance to achieve high electrochemical performance.

Achieving of High Density/Utilization of Active Groups via Synergic Integration of C=N and C=O Bonds for Ultra-Stable and High-Rate Lithium-Ion Batteries

Organic electrode materials are receiving ever-increasing research interest due to their combined advantages, including resource renewability, low cost, and environmental friendliness. However, their practical applications are still terribly plagued by low conductivity, poor rate capability, solubility in electrolyte, and low density/utilization of active groups. In response, herein, as a proof-of-concept experiment, C=N and C=O bonds are synergically integrated into the backbone of pentacene to finely tune the electronic structures of pentacene. Unexpectedly, the firstly obtained unique 5,7,11,14-tetraaza-6,13-pentacenequinone/reduced graphene oxide (TAPQ/RGO) composite exhibits superior electrochemical performances, including an ultra-stable cycling stability (up to 2400 cycles) and good rate capability (174 mAh g⁻¹ even at a high current density of 3.2 A g⁻¹), which might be attributed to the abundant active groups, π-conjugated molecular structure, leaf-like morphology, and the interaction between TAPQ and graphene.

Organic Carbonyl Compounds for Sodium-Ion Batteries: Recent Progress and Future Perspectives

Sodium-organic batteries, which use organic materials as the electrodes in sodium-ion batteries, are an attractive alternative to conventional lithium-ion batteries for next-generation sustainable and versatile energy storage devices owing to the abundant sodium resources and environmental friendly features. However, organics used in sodium-ion batteries also encounter some issues such as low redox potential, high solubility in the electrolyte, and low conductivity. In response, altering the aromatic system/attaching electron-withdrawing groups, constructing polymers, and incorporating a conductive matrix are effective strategies. This review summarizes and briefly discusses recent organic carbonyl compounds for sodium-organic batteries from the viewpoint of function-oriented design, including function evolution from small-molecule compounds to polymers, then composites, and finally flexible electrodes. In particular, as a timely overview, carbonyl-based organic flexible electrodes for sodium-organic batteries are also highlighted for the first time.

Simple method to construct three-dimensional porous carbon for electrochemical energy storage

A 3D porous carbon matrix with a high nitrogen content has been synthesized by employing particles of a nitrogen-enriched superabsorbent polymer (SAP) from the waste diapers of newborn babies. The derived material exhibits an ultrathin layered structure with interconnected pores and a large specific surface area. As it inherits the unique skeleton of the functional polymer from waste diapers, the resulting material (NSAPC-W) has been assessed as an inserting host anode with excellent ultralong cycling performance, as well as steady rate capability for both Li+ and Na+ ions in half cells. Furthermore, the unique structure imparts intimate structural interconnectivity, wide open channels for ion diffusion, and a large accessible surface area, as well as high structural stability, and opens up a wide horizon for electrochemical applications.

A densely packed Sb2O3 nanosheet-graphene aerogel toward advanced sodium-ion batteries

As a promising anodic material for rechargeable batteries, Sb2O3 has drawn increasing attention due to its high theoretical capacity and abundant natural deposits. However, poor cyclability and rate performance of Sb2O3 derived from a large volume change during insertion/desertion reactions as well as a sluggish kinetic process restrict its practical application. Herein, we report a facile amorphous-to-crystalline strategy to synthesize a densely packed Sb2O3 nanosheet-graphene aerogel as a novel anode for sodium ion batteries (SIBs). This Sb2O3/graphene composite displays a reversible capacity as high as 657.9 mA h g-1 even after 100 cycles at 0.1 A g-1, along with an excellent rate capacity of 356.8 mA h g-1 at 5.0 A g-1. The superior electrochemical performance is attributed to the synergistic effects of densely packed Sb2O3 nanosheets and graphene aerogel, which serves as both a robust support and stable buffer layer to maintain the structural stability of the nanocomposite, and enhances the electrode kinetics of electrolyte diffusion and electron transfer simultaneously. Hence, this densely-packed two-dimensional Sb2O3 nanosheet-graphene aerogel can be a promising anode material for rechargeable SIBs due to its facile synthesis process and outstanding electrochemical performance.

2D Metal Chalcogenides Incorporated into Carbon and their Assembly for Energy Storage Applications

2D metal chalcogenides have become a popular focus in the energy storage field because of their unique properties caused by their single-atom thicknesses. However, their high surface energy and van der Waals attraction easily cause serious stacking and restacking, leading to the generation of more inaccessible active sites with rapid capacity fading. The hybridization of 2D metal chalcogenides with highly conductive materials, particularly, incorporating ultrasmall and few-layered metal chalcogenides into carbon frameworks, can not only maximize the exposure of active sites but also effectively avoid their stacking and aggregation during the electrochemical reaction process. Therefore, a satisfactory specific capacity will be achieved with a long cycle life. In this Concept, the representative progress on such intriguing nanohybrids and their applications in energy storage devices are mainly summarized. Finally, an outlook of the future development and challenges of such nanohybrids for achieving an excellent energy storage capability is also provided.

Flexible Micro-Supercapacitors Based on Naturally Derived Juglone

Recently, great efforts have been devoted to designing and fabricating flexible, lightweight, wearable, and miniaturized supercapacitors. At the same time, the exploration of green, renewable, and biocompatible energy-storage materials has been attracting intensive attention. By taking fabrication and configuration design into consideration, the naturally derivable juglone molecule was exploited as an active charge-storage material, and integrated into flexible and micro-supercapacitor devices. The polypyrrole/juglone-composite-based supercapacitors exhibit significant energy-storage capabilities with high specific capacitance and long cyclability, which are comparable to that of conventional electrode materials. This study presents a new way for developing flexible, lightweight, portable, and/or wearable electronic devices with biocompatible and environmentally friendly attributes.

Confined metal Ge quantum dots in carbon nanofibers for stable rechargeable batteries

As a promising alloy-type anode material for rechargeable batteries, the metal germanium (Ge) shows high capacity, but it suffers from a fast capacity fading problem caused by a large volume expansion during lithiation/delithiation cycles. In this study, via a facile electrospinning method, we optimized the combination structure of Ge quantum dots (QDs) and carbon nanofibers (CNFs). Specifically, Ge QDs with a diameter of 4-7 nm were highly dispersed in porous (pore size 10-150 nm) CNFs. The hybridized Ge/CNF nanocomposite exhibited remarkable Li storage performances such as high reversible capacity (1204 mA h g-1 at a current density of 200 mA g-1), high capacity retention (87.1% after 100 cycles) and excellent rate property (760 mA h g-1 at 3000 mA g-1). The improved electrochemical performance was due to the synergistic effects of Ge QDs and carbon nanofibers; this effectively alleviated the volume expansion problem, prevented the agglomeration of Ge, maintained the structural stability of the nanocomposite, and improved the electrode kinetics of diffusion of Li ions.