Mechanistic Understanding of the Plasmonic Enhancement for Solar Water Splitting

Advances in the heterostructures for enhanced hydrogen production efficiency: a comprehensive review

The growing global energy demand and heightened environmental consciousness have contributed to the increasing interest in green energy sources, including hydrogen production. However, the efficacy of this technology is contingent upon the efficient separation of charges, high absorption of sunlight, rapid charge transfer rate, abundant active sites and resistance to photodegradation. The utilization of photocatalytic heterostructures coupling two materials has proved to be effective in tackling the aforementioned challenges and delivering exceptional performance in the production of hydrogen. The present article provides a comprehensive overview of operational principles of photocatalysis and the combination of photocatalytic and piezo-catalytic applications with heterostructures, including the transfer behavior and mechanisms of photoexcited non-equilibrium carriers between the materials. Furthermore, the effects of recent advances and state-of-the-art designs of heterostructures on hydrogen production are discussed, offering practical approaches to form heterostructures for efficient hydrogen production.

Photocatalyst Au@Ni-MOFs with Different Plasmonic Coverages for Improved Hydrogen Evolution from Water

Plasmonic materials are fundamental photosensitizer materials for photocatalytic reactions. Various structures, including core-shell types, satellite types, and distribution types, have been designed and prepared for the optimization of photocatalytic reactions. However, understanding the profound enhancement mechanism of various structures is still challenging. Thus, the plasmonic coverage is considered to be an index for analyzing the influence mechanism. Here, Au@Ni-MOF core-shell flower sphere-like photocatalysts are prepared, and the size of the flower sphere can be precisely regulated by varying the amount of Au. Thus, different plasmonic coverages are realized through the tuning of spheres of different sizes. The high plasmonic coverage of catalysts can enhance visible light absorption, facilitate the generation of photogenerated electron-hole pairs, and shorten the photogenerated carrier transport distance. Moreover, the exponential relationship between the photocatalytic hydrogen production performance and the plasmonic coverage can also be used as a guide for material design. As a result, a photocatalytic hydrogen production rate of 3389 μmol·g-1·h-1 is achieved in the Au@Ni-MOF sample with high plasmonic coverage, which will advance the plasmonic application in photocatalytic reactions.

Red and near-infrared light-activated photoelectrochemical nanobiosensors for biomedical target detection

Photoelectrochemical (PEC) nanobiosensors integrate molecular (bio)recognition elements with semiconductor/plasmonic photoactive nanomaterials to produce measurable signals after light-induced reactions. Recent advancements in PEC nanobiosensors, using light-matter interactions, have significantly improved sensitivity, specificity, and signal-to-noise ratio in detecting (bio)analytes. Tunable nanomaterials activated by a wide spectral radiation window coupled to electrochemical transduction platforms have further improved detection by stabilizing and amplifying electrical signals. This work reviews PEC biosensors based on nanomaterials like metal oxides, carbon nitrides, quantum dots, and transition metal chalcogenides (TMCs), showing their superior optoelectronic properties and analytical performance for the detection of clinically relevant biomarkers. Furthermore, it highlights the innovative role of red light and NIR-activated PEC nanobiosensors in enhancing charge transfer processes, protecting them from biomolecule photodamage in vitro and in vivo applications. Overall, advances in PEC detection systems have the potential to revolutionize rapid and accurate measurements in clinical diagnostic applications. Their integration into miniaturized devices also supports the development of portable, easy-to-use diagnostic tools, facilitating point-of-care (POC) testing solutions and real-time monitoring.

Selective oxidation of glycerol mediated by surface plasmon of gold nanoparticles deposited on titanium dioxide nanowires

This paper describes an alternative method for the in situ synthesis of gold nanoparticles (AuNPs) with a particle size of less than 3 nm, using nanoreactors formed by reverse micelles of 1,4-bis-(2-ethylhexyl) sulfosuccinate sodium (AOT) and nanoparticle stabilization with l-cysteine, which favor the preparation of nanoparticles with size and shape control, which are homogeneously dispersed (1% by weight) on the support of titanium dioxide nanowires (TNWs). To study the activity and selectivity of the prepared catalyst (AuNPs@TNWs), an aqueous solution of 40 mM glycerol was irradiated with a green laser (λ = 530 nm, power = 100 mW) in the presence of the catalyst and O2 as an oxidant at 22 °C for 6 h, obtaining a glycerol conversion of 86% with a selectivity towards hydroxypyruvic acid (HA) of more than 90%. From the control and reactions, we concluded that the Ti-OH groups promote the glycerol adsorption on the nanowires surface and the surface plasmon of the gold nanoparticles favors the selectivity of the reaction towards the hydroxypyruvic acid.

Enhanced photocatalysis of metal/covalent organic frameworks by plasmonic nanoparticles and homo/hetero-junctions

Metal-organic frameworks (MOFs) and covalent organic frameworks (COFs) have garnered attention in photocatalysis due to their unique features including extensive surface area, adjustable pores, and the ability to incorporate various functional groups. However, challenges such as limited visible light absorption and rapid electron-hole recombination often hinder their photocatalytic efficiency. Recent developments have introduced plasmonic nanoparticles (NPs) and junctions to enhance the photocatalytic performance of MOFs/COFs. This paper provides a comprehensive review of recent advancements in MOF/COF-based photocatalysts improved by integration of plasmonic NPs and junctions. We begin by examining the utilization of plasmonic NPs, known for absorbing longer-wavelength light compared to typical MOFs/COFs. These NPs exhibit localized surface plasmon resonance (LSPR) when excited, effectively enhancing the photocatalytic performance of MOFs/COFs. Moreover, we discuss the role of homo/hetero-junctions in facilitating charge separation, further boosting the photocatalytic performance of MOFs/COFs. The mechanisms behind the improved photocatalytic performance of these composites are discussed, along with an assessment of challenges and opportunities in the field, guiding future research directions.

Mid-IR Light-Activatable Full Spectrum LaB6 Plasmonic Photocatalyst

Photocatalysts as long-lasting, benign reagents for disinfection of bacteria in hospitals and public areas/facilities/transportation vehicles are strongly needed. A common limitation for all existing semiconductor photocatalysts is the requirement of activation by external UV-vis-near-infrared (NIR) light with wavelengths shorter than ≈1265 nm. None of the existing photocatalysts can function during nighttime in the absence of external light. Herein, an unprecedented LaB6 plasmonic photocatalyst is reported, which can absorb UV-vis-NIR light and mid-IR (3900 nm) light to split water and generate hydrogen and hydroxyl radicals for the decomposition of organic pollutants, as well as kill multidrug-resistant Escherichia coli bacteria. Mid-IR light (≈2-50 µm) is readily available from the natural environments via thermal radiation of warm/hot objects on the earth including human bodies, animals, furnances, hot/warm electrical devices, and buildings.

Understanding the Behaviors of Plasmon-Induced Hot Carriers and Their Applications in Photocatalysis

Photocatalysis driven by plasmon-induced hot carriers has been gaining increasing attention. Recent studies have demonstrated that plasmon-induced hot carriers can directly participate in photocatalytic reactions, leading to great enhancement in solar energy conversion efficiency, by improving the catalytic activity or changing selectivity. Nevertheless, the utilization efficiency of hot carriers remains unsatisfactory. Therefore, how to correctly understand the generation and transfer process of hot carriers, as well as accurately differentiate between the possible mechanisms, have become a key point of attention. In this review, we overview the fundamental processes and mechanisms underlying hot carrier generation and transport, followed by highlighting the importance of hot carrier monitoring methods and related photocatalytic reactions. Furthermore, possible strategies for the further characterization of plasmon-induced hot carriers and boosting their utilization efficiency have been proposed. We hope that a comprehensive understanding of the fundamental behaviors of hot carriers can aid in designing more efficient photocatalysts for plasmon-induced photocatalytic reactions.

Optical and Electrical Modulation Strategies of Photoelectrodes for Photoelectrochemical Water Splitting

When constructing efficient, cost-effective, and stable photoelectrodes for photoelectrochemical (PEC) systems, the solar-driven photo-to-chemical conversion efficiency of semiconductors is limited by several factors, including the surface catalytic activity, light absorption range, carrier separation, and transfer efficiency. Accordingly, various modulation strategies, such as modifying the light propagation behavior and regulating the absorption range of incident light based on optics and constructing and regulating the built-in electric field of semiconductors based on carrier behaviors in semiconductors, are implemented to improve the PEC performance. Herein, the mechanism and research advancements of optical and electrical modulation strategies for photoelectrodes are reviewed. First, parameters and methods for characterizing the performance and mechanism of photoelectrodes are introduced to reveal the principle and significance of modulation strategies. Then, plasmon and photonic crystal structures and mechanisms are summarized from the perspective of controlling the propagation behavior of incident light. Subsequently, the design of an electrical polarization material, polar surface, and heterojunction structure is elaborated to construct an internal electric field, which serves as the driving force to facilitate the separation and transfer of photogenerated electron-hole pairs. Finally, the challenges and opportunities for developing optical and electrical modulation strategies for photoelectrodes are discussed.

Recent Advances toward Enhanced Photocatalytic Proprieties of BiFeO3-Based Materials

Owing to their remarkable success in photocatalytic applications, multiferroic BiFeO3 and its derivatives have gained a highly promising position as electrode materials for future developments of efficient catalysts. In addition to their appropriate band gaps, these materials exhibit inherent intrinsic polarizations enabling efficient charge carrier separation and their high mobility without the need for additional co-catalysts. Here, we review the existing strategies for enhancing the photocatalytic performances of BiFeO3-based materials and we describe the physico-chemical properties at the origin of their exceptional photocatalytic behavior. A special focus is paid to the degradation of organic pollutants and water splitting, both driven through photocatalysis to unveil the correlation between BiFeO3 size, substitution, and doping on the one hand and the photocatalytic performances on the other hand. Finally, we provide practical recommendations for future developments of high-performing BiFeO3-based electrodes.

Photo-enhanced dehydrogenation of formic acid on Pd-based hybrid plasmonic nanostructures

Coupling visible light with Pd-based hybrid plasmonic nanostructures has effectively enhanced formic acid (FA) dehydrogenation at room temperature. Unlike conventional heating to achieve higher product yield, the plasmonic effect supplies a unique surface environment through the local electromagnetic field and hot charge carriers, avoiding unfavorable energy consumption and attenuated selectivity. In this minireview, we summarized the latest advances in plasmon-enhanced FA dehydrogenation, including geometry/size-dependent dehydrogenation activities, and further catalytic enhancement by coupling local surface plasmon resonance (LSPR) with Fermi level engineering or alloying effect. Furthermore, some representative cases were taken to interpret the mechanisms of hot charge carriers and the local electromagnetic field on molecular adsorption/activation. Finally, a summary of current limitations and future directions was outlined from the perspectives of mechanism and materials design for the field of plasmon-enhanced FA decomposition.

Synergistic Enhancement of Photocatalytic CO2 Reduction by Built-in Electric Field/Piezoelectric Effect and Surface Plasmon Resonance via PVDF/CdS/Ag Heterostructure

Photocatalytic reduction of CO2 using solar energy is an effective means to achieve carbon neutrality. However, the photocatalytic efficiency still requires improvements. In this study, polyvinylidene fluoride (PVDF) ferroelectric/piezoelectric nanofiber membranes are prepared by electrospinning. Cadmium sulfide (CdS) nanosheets are assembled in situ on the surface of PVDF based on coordination between F- and Cd2+ , and then Ag nanoparticles are deposited on CdS. Because of the synergistic effect between localized surface plasmon resonance of Ag nanoparticles and the built-in electric field of PVDF, the CO2 photocatalytic reduction efficiency using PVDF/CdS/Ag under visible light irradiation is significantly higher than that of any combination of CdS, CdS/Ag, or PVDF/CdS. Under micro-vibration to simulate air flow, the CO2 reduction efficiency of PVDF/CdS/Ag is three times higher than that under static conditions, reaching 240.4 µmol g-1 h-1 . The piezoelectric effect caused by micro-vibrations helps prevent the built-in electric field from becoming saturated with carriers and provides a continuous driving force for carrier separation.

Near-Infrared Light-Induced Reversible Deactivation Radical Polymerization: Expanding Frontiers in Photopolymerization

Photoinduced reversible deactivation radical polymerization (photo-RDRP) or photoinduced controlled/living radical polymerization has emerged as a versatile and powerful technique for preparing functional and advanced polymer materials under mild conditions by harnessing light energy. While UV and visible light (λ = 400-700 nm) are extensively employed in photo-RDRP, the utilization of near-infrared (NIR) wavelengths (λ = 700-2500 nm) beyond the visible region remains relatively unexplored. NIR light possesses unique properties, including enhanced light penetration, reduced light scattering, and low biomolecule absorption, thereby providing opportunities for applying photo-RDRP in the fields of manufacturing and medicine. This comprehensive review categorizes all known NIR light-induced RDRP (NIR-RDRP) systems into four mechanism-based types: mediation by upconversion nanoparticles, mediation by photocatalysts, photothermal conversion, and two-photon absorption. The distinct photoinitiation pathways associated with each mechanism are discussed. Furthermore, this review highlights the diverse applications of NIR-RDRP reported to date, including 3D printing, polymer brush fabrication, drug delivery, nanoparticle synthesis, and hydrogel formation. By presenting these applications, the review underscores the exceptional capabilities of NIR-RDRP and offers guidance for developing high-performance and versatile photopolymerization systems. Exploiting the unique properties of NIR light unlocks new opportunities for synthesizing functional and advanced polymer materials.

Nonadiabatic dynamics near metal surfaces under Floquet engineering: Floquet electronic friction vs Floquet surface hopping

In the previous study Wang and Dou [J. Chem. Phys. 158, 224109 (2023)], we have derived a Floquet classical master equation (FCME) to treat nonadiabatic dynamics near metal surfaces under Floquet engineering. We have also proposed a trajectory surface hopping algorithm to solve the FCME. In this study, we map the FCME into a Floquet Fokker-Planck equation in the limit of fast Floquet driving and fast electron motion as compared to nuclear motion. The Fokker-Planck equation is then being solved using Langevin dynamics with explicit friction and random force from the nonadiabatic effects of hybridized electrons and Floquet states. We benchmark the Floquet electronic friction dynamics against Floquet quantum master equation and Floquet surface hopping. We find that Floquet driving results in a violation of the second fluctuation-dissipation theorem, which further gives rise to heating effects.

Combined Structural and Plasmonic Enhancement of Nanometer-Thin Film Photocatalysis for Solar-Driven Wastewater Treatment

Titanium dioxide (TiO2) thin films are commonly used as photocatalytic materials. Here, we enhance the photocatalytic activity of devices based on titanium dioxide (TiO2) by combining nanostructured glass substrates with metallic plasmonic nanostructures. We achieve a three-fold increase of the catalyst's surface area through nanoscale, three-dimensional patterning of periodic, conical grids, which creates a broadband optical absorber. The addition of aluminum and gold activates the structures plasmonically and increases the optical absorption in the TiO2 films to above 70% in the visible and NIR spectral range. We demonstrate the resulting enhancement of the photocatalytic activity with organic dye degradation tests under different light sources. Furthermore, the pharmaceutical drug Carbamazepine, a common water pollutant, is reduced in the aqueous solution by up to 48% in 360 min. Our approach is scalable and potentially enables future solar-driven wastewater treatment.

Nanoplasmonic amplification in microfluidics enables accelerated colorimetric quantification of nucleic acid biomarkers from pathogens

Deployment of nucleic acid amplification assays for diagnosing pathogens in point-of-care settings is a challenge due to lengthy preparatory steps. We present a molecular diagnostic platform that integrates a fabless plasmonic nano-surface into an autonomous microfluidic cartridge. The plasmonic 'hot' electron injection in confined space yields a ninefold kinetic acceleration of RNA/DNA amplification at single nucleotide resolution by one-step isothermal loop-mediated and rolling circle amplification reactions. Sequential flow actuation with nanoplasmonic accelerated microfluidic colorimetry and in conjugation with machine learning-assisted analysis (using our 'QolorEX' device) offers an automated diagnostic platform for multiplexed amplification. The versatility of QolorEX is demonstrated by detecting respiratory viruses: SARS-CoV-2 and its variants at the single nucleotide polymorphism level, H1N1 influenza A, and bacteria. For COVID-19 saliva samples, with an accuracy of 95% on par with quantitative polymerase chain reaction and a sample-to-answer time of 13 minutes, QolorEX is expected to advance the monitoring and rapid diagnosis of pathogens.

Elucidating the Origin of Plasmon-Generated Hot Holes in Water Oxidation

Plasmon-generated hot electrons in metal/oxide heterostructures have been used extensively for driving photochemistry. However, little is known about the origin of plasmon-generated hot holes in promoting photochemical reactions. Herein, we discover that, during the nonradiative plasmon decay, the interband excitation rather than the intraband excitation generates energetic hot holes that enable to drive the water oxidation at the Au/TiO₂ interface. Distinct from lukewarm holes via the intraband excitation that only remain on Au, hot holes from the interband excitation are found to be transferred from Au into TiO₂ and stabilized by surface oxygen atoms on TiO₂, making them available to oxidize adsorbed water molecules. Taken together, our studies provide spectroscopic evidence to clarify the photophysical process for exciting plasmon-generated hot holes, unravel their atomic-level accumulation sites to maintain the strong oxidizing power in metal/oxide heterostructures, and affirm their crucial functions in governing photocatalytic oxidation reactions.

Photo-sterilization of groundwater by tellurium and enhancement by micro/nano bubbles

In rural areas where low-temperature groundwater is used as a drinking water source, cost-effective sterilization techniques are needed to prevent groundwater consumers from the disease risks triggered by pathogenic microorganisms like Escherichia coli and fungal spores. In this study, micro/nano bubbles (MNBs) coupled with the tellurium (Te)-based catalysts were used to considerably enhance the solar disinfection (SODIS) efficiency while overcoming the intrinsic defects of SODIS, particularly in low-temperature. Sterilization tests showed that 6.5 log₁₀ cfu/mL of E. coli K-12 and 4.0 log₁₀ cfu/mL of Aspergillus niger spores were completely inactivated within 5 min while applying this novel process for disinfection of raw groundwater, even in low-temperature. The underlying mechanisms of the extraordinary sterilization efficiency were revealed through comprehensive characterization of the catalysts and the physiological changes of the microorganisms. The localized surface plasmon resonance (LSPR) effect of the Te catalysts was identified to take advantage of photothermal synergism to achieve cell death. The integration of MNBs with the facet-engineered Te catalysts improved the photothermal catalytic effect and extracellular electron transfer, which substantially strengthened disinfection efficiency. This study provides a targeted solution into microbial inactivation in groundwater and emphasizes a cost-effective groundwater sterilization process.

Active Site Engineering on Plasmonic Nanostructures for Efficient Photocatalysis

Plasmonic nanostructures have shown immense potential in photocatalysis because of their distinct photochemical properties associated with tunable photoresponses and strong light-matter interactions. The introduction of highly active sites is essential to fully exploit the potential of plasmonic nanostructures in photocatalysis, considering the inferior intrinsic activities of typical plasmonic metals. This review focuses on active site-engineered plasmonic nanostructures with enhanced photocatalytic performance, wherein the active sites are classified into four types (i.e., metallic sites, defect sites, ligand-grafted sites, and interface sites). The synergy between active sites and plasmonic nanostructures in photocatalysis is discussed in detail after briefly introducing the material synthesis and characterization methods. Active sites can promote the coupling of solar energy harvested by plasmonic metal to catalytic reactions in the form of local electromagnetic fields, hot carriers, and photothermal heating. Moreover, efficient energy coupling potentially regulates the reaction pathway by facilitating the excited state formation of reactants, changing the status of active sites, and creating additional active sites using photoexcited plasmonic metals. Afterward, the application of active site-engineered plasmonic nanostructures in emerging photocatalytic reactions is summarized. Finally, a summary and perspective of the existing challenges and future opportunities are presented. This review aims to deliver some insights into plasmonic photocatalysis from the perspective of active sites, expediting the discovery of high-performance plasmonic photocatalysts.

Light inhibition of hydrogenation reactions on Au-Pd nanocoronals as plasmonic switcher in catalysis

Light, as a powerful energy source, has motivated the many endeavors of chemists in photochemical transformations. We were delighted to find that light has an inhibition effect on hydrogenation reactions. Exploring this previously unperceived effect will bring renewed understanding of interactions of light and matter. This work provides a breakthrough in ways to remotely control chemical reactions by light.

Near-Infrared Light Driven ZnIn2S4-Based Photocatalysts for Environmental and Energy Applications: Progress and Perspectives

Zinc indium sulfide (ZnIn₂S₄), as a significant visible-light-responsive photocatalyst, has become a research hotspot to tackle energy demand and environmental issues owing to its excellent properties of high stability, easy fabrication, and remarkable catalytic activity. However, its drawbacks, including low utilization of solar light and fast photoinduced charge carriers, limit its applications. Promoting the response for near-infrared (NIR) light (~52% solar light) of ZnIn₂S₄-based photocatalysts is the primary challenge to overcome. In this review, various modulation strategies of ZnIn₂S₄ have been described, which include hybrid with narrow optical gap materials, bandgap engineering, up-conversion materials, and surface plasmon materials for enhanced NIR photocatalytic performance in the applications of hydrogen evolution, pollutants purification, and CO₂ reduction. In addition, the synthesis methods and mechanisms of NIR light-driven ZnIn₂S₄-based photocatalysts are summarized. Finally, this review presents perspectives for future development of efficient NIR photon conversion of ZnIn₂S₄-based photocatalysts.

Exploiting the LSPR effect for an enhanced photocatalytic hydrogen evolution reaction

Incorporation of plasmonic metals is one of the most widely adopted strategies for improving the photocatalytic hydrogen evolution reaction (HER) activity of semiconductor photocatalysts. This article summarizes recent advances in the development of plasmonic metal-semiconductor photocatalysts and four localized surface plasmon resonance (LSPR) driven mechanisms by which plasmonic metal nanoparticles can contribute to enhancement of HER activity. In addition, principles for maximizing the contribution of these LSPR driven mechanisms are highlighted to provide insights for future design of plasmonic metal-semiconductor photocatalysts with enhanced HER activity.

Research on photocatalytic CO2 conversion to renewable synthetic fuels based on localized surface plasmon resonance: current progress and future perspectives

Due to its desirable optoelectronic properties, localized surface plasmon resonance (LSPR) can hopefully play a promising role in photocatalytic CO2 reduction reaction (CO2RR). In this review, mechanisms and applications of LSPR effect in this field are introduced in detail.

Plasmonic Metal Mediated Charge Transfer in Stacked Core-Shell Semiconductor Heterojunction for Significantly Enhanced CO2 Photoreduction

Construction of core-shell semiconductor heterojunctions and plasmonic metal/semiconductor heterostructures represents two promising routes to improved light harvesting and promoted charge separation, but their photocatalytic activities are respectively limited by sluggish consumption of charge carriers confined in the cores, and contradictory migration directions of plasmon-induced hot electrons and semiconductor-generated electrons. Herein, a semiconductor/metal/semiconductor stacked core-shell design is demonstrated to overcome these limitations and significantly boost the photoactivity in CO₂  reduction. In this smart design, sandwiched Au serves as a "stone", which "kills two birds" by inducing localized surface plasmon resonance for hot electron generation and mediating unidirectional transmission of conduction band electrons and hot electrons from TiO₂  core to MoS₂  shell. Meanwhile, upward band bending of TiO₂  drives core-to-shell migration of holes through TiO₂ -MoS₂  interface. The co-existence of TiO₂  → Au → MoS₂  electron flow and TiO₂  → MoS₂  hole flow contributes to spatial charge separation on different locations of MoS₂  outer layer for overall redox reactions. Additionally, reduction potential of photoelectrons participating in the CO₂  reduction is elaborately adjusted by tuning the thickness of MoS₂  shell, and thus the product selectivity is delicately regulated. This work provides fresh hints for rationally controlling the charge transfer pathways toward high-efficiency CO₂  photoreduction.

Dual-plasmon-enhanced nitrophenol hydrogenation over W18O49–Au heterostructures studied at the single-particle level

The dual-plasmonic W18O49–Au heterostructure exhibited enhanced catalytic performance in nitrophenol hydrogenation. The HEI process and coupling effect were demonstrated by single-particle spectroscopy and FDTD simulation.

Ultralong Lifetime of Plasmon-Excited Electrons Realized in Nonepitaxial/Epitaxial Au@CdS/CsPbBr3 Triple-Heteronanocrystals

Combination of the strong light-absorbing power of plasmonic metals with the superior charge carrier dynamics of halide perovskites is appealing for bio-inspired solar-energy conversion due to the potential to acquire long-lived plasmon-induced hot electrons. However, the direct coupling of these two materials, with Au/CsPbBr₃ heteronanocrystals (HNCs) as a prototype, results in severe suppression of plasmon resonances. The present work shows that interfacial engineering is a key knob for overcoming this impediment, based on the creation of a CdS mediate layer between Au and CsPbBr₃ forming atomically organized Au-CdS and CdS-CsPbBr₃ interfaces by nonepitaxial/epitaxial combined strategy. Transient spectroscopy studies demonstrate that the resulting Au@CdS/CsPbBr₃ HNCs generate remarkably long-lived plasmon-induced charge carriers with lifetime up to nanosecond timescale, which is several orders of magnitude longer than those reported for colloidal plasmonic metal-semiconductor systems. Such long-lived carriers extracted from plasmonic antennas enable to drive CO₂ photoreduction with efficiency outperforming previously reported CsPbBr₃ -based photocatalysts. The findings disclose a new paradigm for achieving much elongated time windows to harness the substantial energy of transient plasmons through realization of synergistic coupling of plasmonic metals and halide perovskites.

Tipping Gold Nanobipyramids with Titania for the Use of Plasmonic Hotspots to Drive Amine Coupling

Designing plasmonic photocatalysts with spatially controlled catalytic sites is an effective strategy to boost the sunlight-driven chemical transformation efficiency through plasmonic enhancement. Herein, we describe a facile method for the synthesis of TiO₂-tipped Au nanobipyramids (NBPs) to give (Au NBP)/t-TiO₂ nanodumbbells. The surfactant cetyltrimethylammonium bromide concentration is the key factor in the construction of this type of unique nanostructure. The photocatalytic aerobic oxidative coupling of amines using the plasmonic photocatalysts with the dumbbell-like and core@shell structures indicates that the TiO₂-tipped ends for the photo-reduction and the exposed adjacent Au surface for the photo-oxidation on (Au NBP)/t-TiO₂ can significantly improve the photocatalytic activity. The underlying mechanism of the photocatalytic oxidative coupling of benzylamine over (Au NBP)/t-TiO₂ has been thoroughly investigated. Both experimental and simulation results for (Au NBP)/t-TiO₂ and (Au nanorod)/t-TiO₂ confirm the important effect of the plasmonic hotspots on the enhancement of the photocatalytic activity.

Synergistic Effect between CO2 Chemisorption Using Amino-Modified Carbon Nitride and Epoxide Activation by High-Energy Electrons for Plasmon-Assisted Synthesis of Cyclic Carbonates

Photocatalytic CO₂ cycloaddition is a promising approach for CO₂ value-added processes. However, the efficiency of plasmon-assisted CO₂ cycloaddition still needs to be improved and the reaction mechanism is unclear. Herein, g-C₃N₄/Ag (ACN-Ag) hybrids exhibited superior activity of CO₂ cycloaddition by coupling a semiconductor into the plasmonic system, in which the ACN grafting amino group by the formation of carbon vacancies can enhance CO₂ chemisorption; meanwhile, photo-generated electrons from ACN transfer to Ag to form high-energy electrons, which can activate propylene oxide, accelerating the ring-opening step. Importantly, photo-generated electron injection from ACN to Ag and the interaction between Ag nanoparticles and ACN were confirmed by single-particle photoluminescence spectroscopy. The wavelength-dependent activity demonstrated that the plasmon excitation is crucial for the reaction. Moreover, in situ single-particle PL quenching caused by propylene oxide and in situ electron paramagnetic resonance verified the activation of propylene oxide by ACN-Ag. This work is conducive to an in-depth understanding of the mechanism of CO₂ cycloaddition at the single-particle level and provides guidance for the organic synthesis.

Hot Electron-Driven Photocatalysis Using Sub-5 nm Gap Plasmonic Nanofinger Arrays

Semiconductor photocatalysis has received increasing attention because of its potential to address problems related to the energy crisis and environmental issues. However, conventional semiconductor photocatalysts, such as TiO₂ and ZnO, can only be activated by ultraviolet light due to their wide band gap. To extend the light absorption into the visible range, the localized surface plasmon resonance (LSPR) effect of noble metal nanoparticles (NPs) has been widely used. Noble metal NPs can couple incident visible light energy to strong LSPR, and the nonradiative decay of LSPR generates nonthermal hot carriers that can be injected into adjacent semiconductor material to enhance its photocatalytic activity. Here we demonstrate that nanoimprint-defined gap plasmonic nanofinger arrays can function as visible light-driven plasmonic photocatalysts. The sub-5 nm gaps between pairs of collapsed nanofingers can support ultra-strong plasmon resonance and thus boost the population of hot carriers. The semiconductor material is exactly placed at the hot spots, providing an efficient pathway for hot carrier injection from plasmonic metal to catalytic materials. This nanostructure thus exhibits high plasmon-enhanced photocatalytic activity under visible light. The hot carrier injection mechanism of this platform was systematically investigated. The plasmonic enhancement factor was calculated using the finite-difference time-domain (FDTD) method and was consistent with the measured improvement of the photocatalytic activity. This platform, benefiting from the precise controllable geometry, provides a deeper understanding of the mechanism of plasmonic photocatalysis.

Plasmonic Metal/Semiconductor Heterostructure for Visible Light-Enhanced H2 Production

A plasmonic Ag/Bi₂WO₆ heterostructure, having Ag NPs deposited on Bi₂WO₆, is obtained by a hydrothermal and photodeposition method. The synthesized Ag/Bi₂WO₆ composite exhibits strong visible light absorption with a localized surface plasmon resonance (LSPR) and shows an enhanced photoabsorption property. It is demonstrated that such a Ag/Bi₂WO₆ heterostructure shows excellent plasmon-enhanced photocatalytic activity in the dehydrogenation of ammonia borane (NH₃BH₃) solution under visible light irradiation, which is due to the results from the synergetic effect between Ag NPs and emerging W⁵⁺ ions. More importantly, the performance of a Ag/Bi₂WO₆ hybrid is almost eight times higher than that of sole Bi₂WO₆ nanosheets. The introduction of LSPR of Ag in Bi₂WO₆ improves the electrical conductivity of the composite and lowers the recombination rate of charge carriers. This study opens up the opportunity of rationally fabricating plasmonic metal/semiconductor heterostructures for highly efficient photocatalysis.

Enhancement of Plasmon-Induced Photoelectrocatalytic Water Oxidation over Au/TiO2 with Lithium Intercalation

Plasmon-induced chemical reaction is an emerging field but its development faces huge challenges because of low quantum efficiency. Herein, we report that the solar energy conversion efficiency of Au/TiO₂ in plasmon-induced water oxidation is greatly enhanced by intercalating Li⁺ into TiO₂ . An incident photon-to-current efficiency as high as 2.0 %@520 nm is achieved by Au/Li_0.2 TiO₂ in photoelectrocatalytic water oxidation, realizing a 33-fold enhancement in photocurrent density compared with Au/TiO₂ . The superior photoelectrocatalytic performance is mainly ascribed to the enhanced electric conductivity and higher catalytic activity of Li_0.2 TiO₂ . Furthermore, the ultrafast transient absorption spectroscopy suggests that lithium intercalation into TiO₂ could change the dynamics of hot electron relaxation in Au nanoparticles. This work demonstrates that intercalation of alkaline ions into semiconductors can promote the charge separation efficiency of the plasmonic effect of Au/TiO₂ .

Defect engineering tuning electron structure of biphasic tungsten-based chalcogenide heterostructure improves its catalytic activity for hydrogen evolution and triiodide reduction

The design and exploration of high-efficiency and low-cost electrode catalysts are of great significance to the development of novel energy conversion technologies. In this work, metal and nonmetal heteroatoms co-doped biphasic tungsten-based chalcogenide heterostructured catalyst (Co-WS₂/P-WO_2.9) with rich defects is successfully synthesized by a vulcanization technique. The electrocatalytic performance of WS₂/WO₃ in the hydrogen evolution reaction (HER) and triiodide reduction reaction is significantly enhanced by modifying and optimizing its electronic structure through a defect engineering strategy. As an electrocatalyst for HER, the optimized Co-WS₂/P-WO_2.9 exhibits a low overpotential at 10 mA cm^-2 of 146 and 120 mV with small Tafel slopes of 86 and 74 mV dec^-1 in alkaline and acidic electrolyte, respectively. In addition, a Co-WS₂/P-WO_2.9 assembled solar cell yields a short circuit current density of 15.85 mA cm^-2, an open-circuit voltage of 0.74 V, a fill factor of 0.66, and a competitive power conversion efficiency (7.83%), which is comparable or higher than conventional Pt-based solar cell (16.02 mA cm^-2, 0.70 V, 0.63, 7.14%). The formation of a heterostructure in Co-WS₂/P-WO_2.9 leads to the presence of a built-in electric field in the interfacial region between Co-WS₂ and P-WO_2.9, which leads to an increased open-circuit voltage from 0.70 V for Pt to 0.74 V for Co-WS₂/P-WO_2.9. This work can provide a technical support for developing high-performance heterostructured catalysts, which open up a way for improving catalytic performance of heterostructured catalysts in the field of electrocatalysis.

Surface Plasmon Resonance of Large-Size Ag Nanobars

Silver nanobars have attracted much attention due to their distinctive localized surface plasmon resonance (LSPR) in the visible and near-infrared regions. In this work, large-size Ag nanobars (length: 400~1360 nm) working at a longer-wavelength near-infrared range (>1000 nm) have been synthesized. By using the finite-difference time-domain (FDTD) simulation, the LSPR properties of a single large-size Ag nanobar are systematically investigated. The LSPR in Ag nanobar can be flexibly tuned in a wide wavelength range (400~2000 nm) by changing the bar length or etching the bar in the length direction. Our work provides a flexible way to fabricate nanoparticle arrays using large-size nanobars and throws light on the applications of large-size nanomaterials on wide spectral absorbers, LSPR-based sensors and nanofilters.

Enhanced Photocatalytic Oxidation of RhB and MB Using Plasmonic Performance of Ag Deposited on Bi2WO6

Visible-light-driven heterostructure Ag/Bi2WO6 nanocomposites were prepared using a hydrothermal method followed by the photodeposition of Ag on Bi2WO6. A photocatalyst with a different molar ratio of Ag to Bi2WO6 (1:1, 1:2 and 2:1) was prepared. The catalytic performance of Ag/Bi2WO6 towards the photocatalytic oxidation of rhodamine B (RhB) and methylene blue (MB) was explored. Interestingly, the Ag/Bi2WO6 (1:2) catalyst exhibited superior performance; it oxidized 83% of RhB to Rh-110 and degraded 68% of MB in 90 min. This might be due to the optimum amount of Ag nanoparticles, which supported the rapid generation and transfer of separated charges from Bi2WO6 to Ag through the Schottky barrier. An excess of Ag on Bi2WO6 (1:1 and 2:1) blocked the active sites of the reaction and did not produce the desired result. The introduction of Ag on Bi2WO6 improved the electrical conductivity of the composite and lowered the recombination rate of charge carriers. Our work provides a cost-effective route for constructing high-performance catalysts for the degradation of toxic dyes.

Experimental characterization techniques for plasmon-assisted chemistry

Plasmon-assisted chemistry is the result of a complex interplay between electromagnetic near fields, heat and charge transfer on the nanoscale. The disentanglement of their roles is non-trivial. Therefore, a thorough knowledge of the chemical, structural and spectral properties of the plasmonic/molecular system being used is required. Specific techniques are needed to fully characterize optical near fields, temperature and hot carriers with spatial, energetic and/or temporal resolution. The timescales for all relevant physical and chemical processes can range from a few femtoseconds to milliseconds, which necessitates the use of time-resolved techniques for monitoring the underlying dynamics. In this Review, we focus on experimental techniques to tackle these challenges. We further outline the difficulties when going from the ensemble level to single-particle measurements. Finally, a thorough understanding of plasmon-assisted chemistry also requires a substantial joint experimental and theoretical effort.

On a high photocatalytic activity of high-noble alloys Au-Ag/TiO2 catalysts during oxygen evolution reaction of water oxidation

The analysis via density functional theory was employed to understand high photocatalytic activity found on the Au-Ag high-noble alloys catalysts supported on rutile TiO2 during the oxygen evolution of water oxidation reaction (OER). It was indicated that the most thermodynamically stable location of the Au-Ag bimetal-support interface is the bridging row oxygen vacancy site. On the active region of the Au-Ag catalyst, the Au site is the most active for OER catalyzing the reaction with an overpotential of 0.60 V. Whereas the photocatalytic activity of other active sites follows the trend of Au > Ag > Ti. This finding evident from the projected density of states revealed the formation of the trap state that reduces the band gap of the catalyst promoting activity. In addition, the Bader charge analysis revealed the electron relocation from Ag to Au to be the reason behind the activity of the bimetallic that exceeds its monometallic counterparts.

Strategy to Achieve Augmented Photoelectrochemical Water Oxidation via Heteroband Structure Engineering and In Situ Interface Activation

A simple strategy to achieve remarkable activity of photoelectrochemical (PEC) water oxidation is both a critical requirement prior to accelerating the deployment of hydrogen and an important pursuit for renewable solar energy utilization. Despite various ways to improve the PEC performance, laborious fabrication and a statically driven process for water oxidation are still the most challenging tasks. We, herein, demonstrated an extremely simple but extraordinary effective strategy to boost PEC water splitting in a three-dimensional (3D) network structure (Ni foam, i.e., NF)-supported ZnO nanowire (NW)/CdS nanoparticle (NP) (NF/ZnO/CdS) photoelectrode. On the one hand, the establishment and optimization of a heteroband junction between ZnO NWs and CdS NPs substantially reduce the solar energy loss and increase the photocarrier utilization rate at the interface of two phases. On the other hand, the solution flow rotation in the unique macroporous 3D network structure gives rise to obvious piezoelectric (PE) polarization of ZnO located on the skeleton of Ni foam, which can dynamically enforce directional charge transfer. This real-time self-built PE polarization, assisted by the heteroband junction, enables the NF/ZnO/CdS photoanode system to obtain an improved photocurrent density by 12.2-fold compared with pure ZnO (at 1.23 V vs RHE). This work sheds light on an ingenious design strategy for fabricating photoelectrodes that combines a simplified structure and an effectively enhanced water oxidation performance.

Dual Enhancement of Carrier Generation and Migration on Au/g-C3N4 photocatalysts for High-Efficient Broadband PET-RAFT Polymerization

Photo-induced electron/energy transfer RAFT (PET-RAFT) polymerization can produce well-defined polymers with spatio-temporal control. Semiconductor graphitic carbon nitride (g-C3N4) as thermally and chemically stable photocatalyst, has achieved PET-RAFT method under UV-irradiation...

Ultrathin g-PAN/PANI encapsulated Cu nanoparticles decorated on SrTiO3 with high stability and as an efficient photocatalytic H2 evolution and degradation of 4-nitrophenol under visible-light irradiation

Copper-based photocatalyst has attracted much attention because of its great prospects in photochemical conversion. However, there are still challenges facing the preparation of copper-based photocatalysts that have high catalytic efficiency...

Recent advances in electron manipulation of nanomaterials for photoelectrochemical biosensors

This feature article discusses the recent advances and strategies of building photoelectrochemical (PEC) biosensors from the perspective of regulating the electron transfer of nanomaterials.

On the Roles of Electron Transfer in Catalysis by Nanoclusters and Nanoparticles

Electron transfer plays a major role in chemical reactions and processes, and this is particularly true of catalysis by nanomaterials. The advent of metal nanoparticle (NP) catalysts, recently including atomically precise nanoclusters (NCs) as parts of nanocatalyst devices has brought increased control of the relationship between NP and NC structures and their catalytic functions. Consequently, the molecular definition of these new nanocatalysts has allowed a better understanding and management of various kinds of electron transfer involved in the catalytic processes. This Minireview brings a chemist's view of several major aspects of electron-transfer functions concerning NPs and NCs in catalytic processes. Particular focus concerns the role of NPs and NCs as electron reservoirs and light-induced antenna in catalytic processes from H₂ generation to more complex reactions and sustainable energy production.

Bimetallic Cu-Co-Se Nanotube Arrays Assembled on 3D Framework: an Efficient Bifunctional Electrocatalyst for Overall Water Splitting

Highly active bifunctional electrocatalysts for water splitting are of particular importance for the widespread usage of renewable energy, which require synergistic effect of ingenious architecture and intrinsic catalytic activity. Herein, a novel Cu-Co-Se nanotube array supported on 3D copper skeleton was synthesized as high-efficiency bifunctional electrocatalyst for overall water splitting via a facile two-step hydrothermal method. The rationally designed Cu-Co-Se nanotube electrocatalyst exhibited good electrocatalytic performance, with overpotential of only 152 mV to generate 10 mA cm^-2 for the hydrogen evolution reaction and a small overpotential of 332 mV to drive a current density of 50 mA cm^-2 for the oxygen evolution reaction. The good electrocatalytic performance was mainly due to the large electrochemical surface area and electronic coupling synergies triggered by the self-supported bimetallic nanotube architecture. The water splitting system assembled using Cu-Co-Se nanotube as cathode and anode only needed a cell voltage of 1.65 V to drive a current density of 10 mA cm^-2 with long durability of 50 h for overall water splitting. Furthermore, density functional theory calculations proved that the existence of electron exchange between the neighboring bimetals as well as the coupling between Cu, Co, and Se contributed to the improvement of the water splitting performance. This work provides a general strategy to develop cost-efficient and geometrically superior bimetallic electrocatalysts toward water splitting for large-scale hydrogen production.

Plasmon-Enhanced, Self-Traced Nanomotors on the Surface of Silicon

Light-driven nanomotors have attracted much attention due to their potential applications. The movement of conventional nanomotors typically occurs in the solution phase, which limits their application fields. Utilizing visible light to drive nanomotors at the solid-liquid interface represents a grand challenge due to the large friction force between the nanomotor and the solid surface. Based on the attractive plasmon resonance of Au nanocrystals, for the first time, plasmon-enhanced Au nanocrystal-based nanomotors moving at the silicon-aqueous solution interface have been developed. Such nanomotors move with a clear trace engraved on the Si surface, representing an excellent and exceptional self-traced nanomotor system. In addition, the nanomotor trace on the Si surface also provides a unique and promising approach to the fabrication of nanoscale Si patterns, which is central to many applications, including microelectronics, sensing, information storage, and optoelectronics.

Plasmonic Photoelectrochemistry: In View of Hot Carriers

Utilizing plasmon-generated hot carriers to drive chemical reactions has emerged as a popular topic in solar photocatalysis. However, a complete description of the underlying mechanism of hot-carrier transfer in photochemical processes remains elusive, particularly for those involving hot holes. Photoelectrochemistry enables to localize hot holes on photoanodes and hot electrons on photocathodes and thus offers an approach to separately explore the hole-transfer dynamics and electron-transfer dynamics. This review summarizes a comprehensive understanding of both hot-hole and hot-electron transfers from photoelectrochemical studies on plasmonic electrodes. Additionally, working principles and applications of spectroelectrochemistry are discussed for plasmonic materials. It is concluded that photoelectrochemistry provides a powerful toolbox to gain mechanistic insights into plasmonic photocatalysis.

Plasmonic Coupling Architectures for Enhanced Photocatalysis

Plasmonic photocatalysis is a promising approach for solar energy transformation. Comparing with isolated metal nanoparticles, the plasmonic coupling architectures can provide further strengthened local electromagnetic field and boosted light-harvesting capability through optimal control over the composition, spacing, and orientation of individual nanocomponents. As such, when integrated with semiconductor photocatalysts, the coupled metal nanostructures can dramatically promote exciton generation and separation through plasmonic-coupling-driven charge/energy transfer toward superior photocatalytic efficiencies. Herein, the principles of the plasmonic coupling effect are presented and recent progress on the construction of plasmonic coupling architectures and their integration with semiconductors for enhanced photocatalytic reactions is summarized. In addition, the remaining challenges as to the rational design and utilization of plasmon coupling structures are elaborated, and some prospects to inspire new opportunities on the future development of plasmonic coupling structures for efficient and sustainable light-driven reactions are raised.