Performance Enhancement of Electronic and Energy Devices via Block Copolymer Self-Assembly

Piezoelectric Properties of As-Spun Poly(vinylidene Fluoride)/Multi-Walled Carbon Nanotube/Zinc Oxide Nanoparticle (PVDF/MWCNT/ZnO) Nanofibrous Films

Conductive multi-walled carbon nanotubes (MWCNTs) as well as piezoelectric zinc oxide (ZnO) nanoparticles are frequently used as a single additive and dispersed in polyvinylidene fluoride (PVDF) solutions for the fabrication of piezoelectric composite films. In this study, MWCNT/ZnO binary dispersions are used as spinning liquids to fabricate composite nanofibrous films by electrospinning. Binary additives are conducive to increasing the crystallinity, piezoelectric voltage coefficient, and consequent piezoelectricity of as-spun films owing to the stretch-enhanced polarization of the electrospinning process under an applied electric field. PCZ-1.5 film (10 wt. % PVDF/0.1 wt. % MWCNTs/1.5 wt. % ZnO nanoparticles) contains the maximum β-phase content of 79.0% and the highest crystallinity of 87.9% in nanofibers. A sensor using a PCZ-1.5 film as a functional layer generates an open-circuit voltage of 10 V as it is subjected to impact loads with an amplitude of 6 mm at 10 Hz. The piezoelectric sensor reaches a power density of 0.33 μW/cm2 and a force sensitivity of 582 mV/N. In addition, the sensor is successfully applied to test irregular motions of a bending finger and stepping foot. The result indicates that electrospun PVDF/MWCNT/ZnO nanofibrous films are suitable for wearable devices.

Multilaminate Energy Storage Films from Entropy-Driven Self-Assembled Supramolecular Nanocomposites

Composite materials comprising polymers and inorganic nanoparticles (NPs) are promising for energy storage applications, though challenges in controlling NP dispersion often result in performance bottlenecks. Realizing nanocomposites with controlled NP locations and distributions within polymer microdomains is highly desirable for improving energy storage capabilities but is a persistent challenge, impeding the in-depth understanding of the structure-performance relationship. In this study, a facile entropy-driven self-assembly approach is employed to fabricate block copolymer-based supramolecular nanocomposite films with highly ordered lamellar structures, which are then used in electrostatic film capacitors. The oriented interfacial barriers and well-distributed inorganic NPs within the self-assembled multilaminate nanocomposites effectively suppress leakage current and mitigate the risk of breakdown, showing superior dielectric strength compared to their disordered counterparts. Consequently, the lamellar nanocomposite films with optimized composition exhibit high energy efficiency (>90% at 650 MV m-1), along with remarkable energy density and power density. Moreover, finite element simulations and statistical modeling have provided theoretical insights into the impact of the lamellar structure on electrical conduction, electric field distribution, and electrical tree propagation. This work marks a significant advancement in the design of organic-inorganic hybrids for energy storage, establishing a well-defined correlation between microstructure and performance.

Responsive blends of block copolymers stabilize the hexagonally perforated lamellae morphology

Blends of block copolymers can form phases and exhibit features distinct from the constituent materials. We study thin film blends of cylinder-forming and lamellar-forming block copolymers across a range of substrate surface energies. Blend materials are responsive to interfacial energy, allowing selection of pure or coexisting phases based on surface chemistry. Blending stabilizes certain motifs that are typically metastable, and can be used to generate pure hexagonally perforated lamellar thin films across a range of film thicknesses and surface energies. This tolerant behavior is ascribed to the ability of blend materials to redistribute chains to stabilize otherwise high-energy defect structures. The blend responsiveness allows the morphology to be spatially defined through multi-tone chemical surface patterns.

Soft-Shear-Aligned Vertically Oriented Lamellar Block Copolymers for Template-Free Sub-10 nm Patterning and Hybrid Nanostructures

The template-free unidirectional alignment of lamellar block copolymers (l-BCPs) for sub-10 nm high-resolution patterning and hybrid multicomponent nanostructures is important for technological applications. We demonstrate a modified soft-shear-directed self-assembly (SDSA) approach for aligning pristine l-BCPs and l-BCPs with incorporated polymer-grafted nanoparticles (PGNPs), as well as the l-BCP conversion to aligned gold nanowires, and hybrid of metallic gold nanowire and dielectric silica nanoparticle in the form of line-dot nanostructures. The smallest patterns have a half-pitch as small as 9.8 nm. In all cases, soft-shear is achieved using a high-molecular-mass polymer topcoat layer, with support on a neutral bottom layer. We also show that the hybrid line-dot nanostructures have a red-shifted plasmonic response in comparison to neat gold nanowires. These template-free aligned BCPs and nanowires have potential use in nanopatterning applications, and the line-dot nanostructures should be useful in the sensing of biomolecules and other molecular species based on the plasmonic response of the nanowires.

Fabrication of Nanodevices Through Block Copolymer Self-Assembly

Block copolymer (BCP) self-assembly, as a novel bottom-up patterning technique, has received increasing attention in the manufacture of nanodevices because of its significant advantages of high resolution, high throughput, low cost, and simple processing. BCP self-assembly provides a very powerful approach to constructing diverse nanoscale templates and patterns that meet large-scale manufacturing practices. For the past 20 years, the self-assembly of BCPs has been extensively employed to produce a range of nanodevices, such as nonvolatile memory, bit-patterned media (BPM), fin field-effect transistors (FinFETs), photonic nanodevices, solar cells, biological and chemical sensors, and ultrafiltration membranes, providing a variety of configurations for high-density integration and cost-efficient manufacturing. In this review, we summarize the recent progress in the fabrication of nanodevices using the templates of BCP self-assembly, and present current challenges and future opportunities.

Host-guest complexation modulated aqueous polymerization-induced self-assembly for monodisperse hierarchical nanoflowers

This work presents a one-step synthesis of monodisperse nanoflowers by aqueous polymerization-induced self-assembly (PISA), modulated by host-guest interactions. Owing to the low monomer swelling of nanoparticles restricted by host-guest complexation, hierarchical surficial micellar structures were generated at the outer surface of the vesicles, forming fractal nanoflowers with a diameter polydispersity as low as 1.01. Our method allows the straightforward synthesis of monodisperse hierarchical nanoparticles for a wide range of applications.

Synthesis of hierarchically porous 3D polymeric carbon superstructures with nitrogen-doping by self-transformation: a robust electrocatalyst for the detection of herbicide bentazone

Bentazone (BEZ) is one of the utmost selective problematic contact-past herbicide with high toxicity for humans owing to feasible contamination of surface and ground water. In this work, an electrochemical sensor has been developed for the sensitive detection of BEZ, based on hierarchically porous three-dimensional (3D) carbon superstructures (CS)-modified electrodes. The CSs (namely, CS_HEX, CS_PY, CS_ACN, and CS_NOS) were prepared by the pyrolysis process from organic porous polyacrylonitrile (PAN) superstructure particles (namely, PAN_HEX, PAN_PY, PAN_ACN, and PAN_NOS) obtained by free radical polymerization method using different solvents (hexane, pyridine, acetonitrile, and also no solvent). The assembly with the working electrode of CSs causes the electrocatalytic BEZ oxidation by rapid electron transfer compared to the PAN superstructures and bare electrodes. Intriguingly, compared to all electrodes, CS_HEX-modified electrode showed the superior electrochemical detection of BEZ at a working potential of 0.99 V (vs. Ag/AgCl), very low detection limit (0.002 μM), wide dynamic linear range (0.03 to 200 μM), high sensitivity (9.95 μA μM^-1 cm^-2), and excellent reliability. The advanced sensors displayed an intensification of oxidation peak current of BEZ with high selectivity, remarkable sensitivity, and reproducibility for BEZ detection and received satisfactory outcomes designating the application of sensors for the determination of BEZ in river water samples.

Solution-Processed Flexible Biomemristor Based on Gold-Decorated Chitosan

The main requirements for skin-attachable memory devices are flexibility and biocompatibility. We represent a flexible, transparent, and biocompatible resistive switching random access memory (ReRAM) based on gold-decorated chitosan for future flexible and wearable electronics. The device with an Ag/Au-chitosan/Au cross-bar structure shows nonvolatile ReRAM properties. This fabricated Au-chitosan-based biocompatible ReRAM (bioReRAM) shows reliable bipolar memory performance with mechanical flexibility. The device shows essential memory characterizations including long data retention and hundreds of switching cycles. The origin of the resistance switching properties is related to trap-assisted space-charge-limited conduction in the high-resistance state and formation/annihilation of a conductive filament in the low-resistance state. This transparent bioReRAM is a viable candidate for flexible and biodegradable nanoelectronic devices.

Nanoscratch-Directed Self-Assembly of Block Copolymer Thin Films

Directed self-assembly (DSA) of block copolymer (BCP) thin films is of particular interest in nanoscience and nanotechnology due to its superior ability to form various well-aligned nanopatterns. Herein, nanoscratch-DSA is introduced as a simple and scalable DSA strategy allowing highly aligned BCP nanopatterns over a large area. A gentle scratching on the target substrate with a commercial diamond lapping film can form uniaxially aligned nanoscratches. As applied in BCP thin films, the nanoscratch effectively guides the self-assembly of overlying BCPs and provides highly aligned nanopatterns along the direction of the nanoscratch. The nanoscratch-DSA is not material-specific, allowing more versatile nanofabrication for various functional nanomaterials. In addition, we demonstrate that the nanoscratch-DSA can be utilized as a direction-controllable and area-selective nanofabrication method.

Frustrated Microparticle Morphologies of a Semicrystalline Triblock Terpolymer in 3D Soft Confinement

Self-assembly of block copolymers (BCPs) in three-dimensional (3D) confinement of emulsion droplets has emerged as a versatile route for the formation of functional micro- and nanoparticles. While the self-assembly of amorphous coil-coil BCPs is fairly well documented, less is known about the behavior of crystalline-coil BCPs. Here, we demonstrate that confining a linear ABC triblock terpolymer with a crystallizable middle block in oil-in-water (O/W) emulsions results in a range of microparticles with frustrated inner structure originating from the conflict between crystallization and curved interfaces. Polystyrene-block-polyethylene-block-poly(methyl methacrylate) (PS-b-PE-b-PMMA, S₃₂E₃₆M₃₂⁹³) in toluene droplets was subjected to different preparation protocols. If evaporation was performed well above the bulk crystallization temperature of the PE block (T_evap > T_c), S₃₂E₃₆M₃₂⁹³ first microphase-separated into microparticles with lamella morphology followed by crystallization into a variety of frustrated morphologies (e.g., bud-like, double staircase, spherocone). By evaporating at significantly lower temperatures that allow the PE block to crystallize from solution (T_evap < T_c), S₃₂E₃₆M₃₂⁹³ underwent crystallization-driven self-assembly into patchy crystalline-core micelles, followed by confinement assembly into lenticular microparticles with compartmentalized hexagonal cylinder lattices. The frequency of these frustrated morphologies depends on polymer concentration and the evaporation protocol. These results provide a preliminary understanding of the morphological behavior of semicrystalline block copolymers in 3D soft confinement and may provide alternative routes to structure multicompartment microparticles from a broader range of polymer properties.

Transition of Ultrathick Polyamide Tubes into Vesicles with Great Stability

This work reports on the transition of a polyamide ultrathick wall microtubes to microvesicles through self-assembly. An amphiphilic polyamide is synthesized first by the solution polycondensation of sodium isophthalate-5-sulfonate (SIPA) and poly(propylene glycol) bis(2-aminopropyl ether) 2000. Then, its self-assembly in aqueous solution is investigated through direct hydration. The size and morphology of the self-assemblies is investigated by transmission electron microscope (TEM), scanning electron microscope (SEM), atomic force microscope (AFM), and optical microscope (OM) measurements. The result shows that the as-prepared polyamide first self-assembles to thick walled tubes, then these tubes can gradually evolve to ultrathick wall microvesicles with an unusually thick membrane above 330 nm. Both the transition pathway and the mechanism are investigated in micromicroscopy. Most importantly, the microvesicles show great thermal and chemical stability. The novel superstable self-assembly structures as well as the transition mechanism presented here offer a promising perspective for the application in the scope of the biological membrane movements and nanoelectromechanics in medical devices.

Self-template-assisted micro-phase segregation in blended liquid-crystalline block copolymers films toward three-dimensional structures

In-plane mesopatterns derived from block-copolymer (BCP) micro-phase segregation in thin films have attracted much interest in practical applications as well as fundamental research programs. However, phase segregation along the film-normal direction has been less studied. Here, we describe a strategy to concurrently, yet independently, control in-plane micro-phase and out-of-plane macro-phase segregation in multiblended films composed of liquid-crystalline BCPs (LCBCPs), affording spontaneously layered three-dimensional (3D) mesostructures. This strategy relies on sequential liquid crystallization during the cooling process in thermal annealing as follows. The constituent LCBCP with the highest isotropic-transition temperature (T _iso) first liquid-crystallizes and segregates from the other LCBCP mixture remaining in isotropic states to form a noncontaminated layer at the top surface. This preformed LCBCP layer preserves its inherent in-plane pattern and acts as a template guiding the subsequent micro-phase segregations of the other low-T _iso LCBCPs underneath. This self-template-assisted micro-phase segregation (STAMPS) readily provides 3D mesostructures, the potential toward rational material design of which is also demonstrated in water-separation applications.

Universal Interfacial Control through Polymeric Nanomosaic Coating for Block Copolymer Nanopatterning

The employment of self-assembly of soft materials has been accepted as an inexpensive, robust, and reliable patterning method. As their self-assembly relies on the delicate molecular interactions near the substrate, a precise prediction/control of the interface structure and dynamics is critical to achieve desired nanostructures. Herein, a polymeric nanomosaic (PNM) pattern is created from the air/water interfacial self-assembly of a block copolymer (BCP) and introduced as an effective interfacial energy control for substrates. As a demonstration, the PNM coating is employed to control the BCP film structures. The perpendicular orientation of BCP self-assembly, which requires neutral wetting conditions for both blocks, is difficult to achieve but can readily be obtained with the PNM coating upon a fine resolution of the pattern quality. The universal applicability of the PNM coating as an interfacial control has been confirmed on curved, flexible, and three-dimensional substrates. In addition, the PNM is introduced as an etching-free and reusable topcoat imparting free surface neutralization even for the high-χ BCP nanopatterning.

Macroscopic Alignment of Block Copolymers on Silicon Substrates by Laser Annealing

Laser annealing is a competitive alternative to conventional oven annealing of block copolymer (BCP) thin films enabling rapid acceleration and precise spatial control of the self-assembly process. Localized heating by a moving laser beam (zone annealing), taking advantage of steep temperature gradients, can additionally yield aligned morphologies. In its original implementation it was limited to specialized germanium-coated glass substrates, which absorb visible light and exhibit low-enough thermal conductivity to facilitate heating at relatively low irradiation power density. Here, we demonstrate a recent advance in laser zone annealing, which utilizes a powerful fiber-coupled near-IR laser source allowing rapid BCP annealing over a large area on conventional silicon wafers. The annealing coupled with photothermal shearing yields macroscopically aligned BCP films, which are used as templates for patterning metallic nanowires. We also report a facile method of transferring laser-annealed BCP films onto arbitrary surfaces. The transfer process allows patterning substrates with a highly corrugated surface and single-step rapid fabrication of multilayered nanomaterials with complex morphologies.

Photoinduced Modulation of Polymeric Interfacial Behavior Controlling Thin-Film Block Copolymer Wetting

The tunable surface-wetting properties of photosensitive random copolymer mats were used to spatially control the orientations of thin-film block copolymer (BCP) structures. A photosensitive mat was produced via thermal treatment on spin-coated random copolymers of poly(styrene-ran-2-nitrobenzyl methacrylate-ran-glycidyl methacrylate), synthesized via reversible-deactivation radical polymerization. The degree of UV-induced deprotection of the nitrobenzyl esters in the mat was precisely controlled through the amount of UV-irradiation energy imparted to the mat. The resulting polarity switching of the constituents collectively altered the interfacial wetting properties of the mat, and the tunability allowed lamellar or cylinder-forming poly(styrene-b-methyl methacrylate) BCP thin films, applied over the mat, to change the domain orientation from perpendicular to parallel at proper UV exposures. UV irradiation passing through a photomask was capable of generating defined regions of BCP domains with targeted orientations.

Super stable giant tubes with densely packed multilayer ultrathick membranes self-assembled from amphiphilic polyamide

This work reports on the preparation of giant tubes with millimeter-scale length, micron diameter and ultrathick walls above 250 nm, from the aqueous self-assembly of a novel amphiphilic polyamide. Most interestingly, the tubes display great chemical and thermal stability.

Lithography-Free Route to Hierarchical Structuring of High-χ Block Copolymers on a Gradient Patterned Surface

A chemically defined patterned surface was created via a combined process of controlled evaporative self-assembly of concentric polymer stripes and the selective surface modification of polymer brush. The former process involved physical adsorption of poly (methyl methacrylate) (PMMA) segments into silicon oxide surface, thus forming ultrathin PMMA stripes, whereas the latter process was based on the brush treatment of silicon native oxide surface using a hydroxyl-terminated polystyrene (PS-OH). The resulting alternating PMMA- and PS-rich stripes provided energetically favorable regions for self-assembly of high χ polystyrene-block-polydimethylsiloxane (PS-b-PDMS) in a simple and facile manner, dispensing the need for conventional lithography techniques. Subsequently, deep reactive ion etching and oxygen plasma treatment enabled the transition of the PDMS blocks into oxidized groove-shaped nanostructures.

Spatial arrangement of block copolymer nanopatterns using a photoactive homopolymer substrate

Spatial control of the orientation of block copolymers (BCPs) in thin films offers enormous opportunities for practical nanolithography applications. In this study, we demonstrate the use of a substrate comprised of poly(4-acetoxystyrene) to spatially control interfacial interactions and block copolymer orientation over different length scales. Upon UV irradiation poly(4-acetoxystyrene) undergoes a photo-Fries rearrangement yielding phenolic groups available for further functionalization. The wetting behaviour of PS-b-PMMA deposited on the poly(4-acetoxystyrene) films could be precisely controlled through controlling the UV irradiation dose. After exposure, and a mild post-exposure treatment, the substrate switches from asymmetric, to neutral and then to symmetric wetting. Upon exposure through photomasks, a range of high fidelity micro-patterns consisting of perpendicularly oriented lamellar microdomains were generated. Furthermore, the resolution of chemically patterned poly(4-acetoxystyrene) substrate could be further narrowed to submicrometer scale using electron beam lithography. When the BCP was annealed on an e-beam modified poly(4-acetoxystyrene) surface, the interface between domains of parallel and perpendicular orientation of the BCPs was well defined, especially when compared with the substrates patterned using the photomask.

Self-assembly of copper-free maltoheptaose-block-polystyrene nanostructured thin films in real and reciprocal space

The promising carbohydrate-based block copolymer maltoheptaose-block-polystyrene (MH-b-PS) has been used for high-performance memory transistors and next generation nanolithography. In order to realize the potential of MH-b-PS especially in microelectronic applications, we firstly improved its synthetic method for obtaining large amount of copper-free MH-b-PS. The main improvement relies on the removal of the residual copper catalyst by using a chelating resin. Then, the microphase separation of copper-free MH-b-PS in both thin film and bulk states under different solvent vapor annealing conditions were investigated comprehensively and compared with our previous report by using both real-space and reciprocal-space techniques. A phase transition of MH-b-PS from hexagonal close-packed horizontal cylinders to face-centered cubic were observed when increasing the amount of tetrahydrofuran in the mixture annealing solvent of tetrahydrofuran and H₂O. More details about self-assembled MH-b-PS nanostructures were analyzed by comparing grazing incidence small angle X-ray scattering patterns with corresponding atomic force microscopy phase images.

Molecular-weight dependence of the formation of highly ordered lamellar structures of poly(N-dodecyl acrylamide) by humid annealing

Highly oriented lamellar films of poly(N-dodecylacrylamide) with high molecular weights were formed by nanosegregation between alkyl side chains and a water-adsorbed main chain.

Effective weight control via an implanted self-powered vagus nerve stimulation device

In vivo vagus nerve stimulation holds great promise in regulating food intake for obesity treatment. Here we present an implanted vagus nerve stimulation system that is battery-free and spontaneously responsive to stomach movement. The vagus nerve stimulation system comprises a flexible and biocompatible nanogenerator that is attached on the surface of stomach. It generates biphasic electric pulses in responsive to the peristalsis of stomach. The electric signals generated by this device can stimulate the vagal afferent fibers to reduce food intake and achieve weight control. This strategy is successfully demonstrated on rat models. Within 100 days, the average body weight is controlled at 350 g, 38% less than the control groups. This work correlates nerve stimulation with targeted organ functionality through a smart, self-responsive system, and demonstrated highly effective weight control. This work also provides a concept in therapeutic technology using artificial nerve signal generated from coordinated body activities.

Developing new technologies for the neuromodulation of the vagus nerve can enable therapeutic strategies for body weight control in obese patients. Here, the authors present a battery-free self-powered implantable vagus nerve stimulation system that electrically responds to stomach movement.

Flash-Induced Stretchable Cu Conductor via Multiscale-Interfacial Couplings

Herein, a novel stretchable Cu conductor with excellent conductivity and stretchability is reported via the flash-induced multiscale tuning of Cu and an elastomer interface. Microscale randomly wrinkled Cu (amplitude of ≈5 µm and wavelength of ≈45 µm) is formed on a polymer substrate through a single pulse of a millisecond flash light, enabling the elongation of Cu to exceed 20% regardless of the stretching direction. The nanoscale interlocked interface between the Cu nanoparticles (NPs) and the elastomer increases the adhesion force of Cu, which contributes to a significant improvement of the Cu stability and stretchability under harsh yielding stress. Simultaneously, the flash-induced photoreduction of CuO NPs and subsequent Cu NP welding lead to outstanding conductivity (≈37 kS cm-1) of the buckled elastic electrode. The 3D structure of randomly wrinkled Cu is modeled by finite element analysis simulations to show that the flash-activated stretchable Cu conductors can endure strain over 20% in all directions. Finally, the wrinkled Cu is utilized for wireless near-field communication on the skin of human wrist.

Laser ablation of block copolymers with hydrogen-bonded azobenzene derivatives

Supramolecular assemblies (PS-b-P4VP (AzoR)) are fabricated by hydrogen-bonding azobenzene derivatives (AzoR) to poly(4-vinyl pyridine) blocks of polystyrene-block-poly(4-vinyl pyridine) (PS-b-P4VP). PS-b-P4VP(AzoR) forms phase separated nanostructures with a period of ∼75–105 nm. A second length scale structure with a period of 2 μm is fabricated on phase separated PS-b-P4VP(AzoR) by laser interference ablation. Both the concentration and the substituent of AzoR in PS-b-P4VP(AzoR) affect the laser ablation process. The laser ablation threshold of PS-b-P4VP(AzoR) decreases as the concentration of AzoR increases. In PS-b-P4VP(AzoR) with different substituents (R = CN, H, and CH3), ablation thresholds follow the trend: PS-b-P4VP(AzoCN)<PS-b-P4VP(AzoCH3)<PS-b-P4VP(AzoH). This result indicates that the electron donor group (CH3) and the electron acceptor group (CN) can lower the ablation threshold of PS-b-P4VP(AzoR).

Trichogenic Photostimulation Using Monolithic Flexible Vertical AlGaInP Light-Emitting Diodes

Alopecia is considered an aesthetic, psychological, and social issue among modern people. Although laser-induced skin stimulation is utilized for depilation treatment, such treatment has significant drawbacks of high energy consumption, huge equipment size, and limited usage in daily life. Here, we present a wearable photostimulator for hair-growth applications using high-performance flexible red vertical light-emitting diodes (f-VLEDs). Flexible microscale LEDs were effectively fabricated by a simple monolithic fabrication process, resulting in high light output (∼30 mW mm^-2), low forward voltage (∼2.8 V), and excellent flexibility for wearable biostimulation. Finally, trichogenic stimulation of a hairless mouse was achieved using high-performance red f-VLEDs with high thermal stability, device uniformity, and mechanical durability.

Surface patterning of polyacrylamide gel using scanning electrochemical cell microscopy (SECCM)

Scanning electrochemical cell microscopy is introduced as a new tool for the synthesis and deposition of polymers on SAM-functionalised Au surfaces. The deposition of poly(N-hydroxyethyl acrylamide) is shown to be enhanced through the electrochemical generation of activating Cu(i)Cl/Me6TREN catalyst. Initiation of the polymerisation reaction is most likely due to in situ generation of reactive oxygen species following oxygen reduction.

Reliable Multistate Data Storage with Low Power Consumption by Selective Oxidation of Pyramid-Structured Resistive Memory

Multilevel data storage using resistive random access memory (RRAM) has attracted significant attention for addressing the challenges associated with the rapid advances in information technologies. However, it is still difficult to secure reliable multilevel resistive switching of RRAM due to the stochastic and multiple formation of conductive filaments (CFs). Herein, we demonstrate that a single CF, derived from selective oxidation by a structured Cu active electrode, can solve the reliability issue. High-quality pyramidal Cu electrodes with a sharp tip are prepared via the template-stripping method. Morphology-dependent surface energy facilitates the oxidation of Cu atoms at the tip rather than in other regions, and the tip-enhanced electric fields can accelerate the transport of the generated Cu ions. As a result, CF growth occurs mainly at the tip of the pyramidal electrode, which is confirmed by high-resolution electron microscopy and elemental analysis. The RRAM exhibits highly uniform and low forming voltages (the average forming voltage and its standard deviation for 20 pyramid-based RRAMs are 0.645 and 0.072 V, respectively). Moreover, all multilevel resistance states for the RRAMs are clearly distinguished and show narrow distributions within 1 order of magnitude, leading to reliable cell-to-cell performance for MLC operation.

Creating Active Device Materials for Nanoelectronics Using Block Copolymer Lithography

The prolonged and aggressive nature of scaling to augment the performance of silicon integrated circuits (ICs) and the technical challenges and costs associated with this has led to the study of alternative materials that can use processing schemes analogous to semiconductor manufacturing. We examine the status of recent efforts to develop active device elements using nontraditional lithography in this article, with a specific focus on block copolymer (BCP) feature patterning. An elegant route is demonstrated using directed self-assembly (DSA) of BCPs for the fabrication of aligned tungsten trioxide (WO₃) nanowires towards nanoelectronic device application. The strategy described avoids conventional lithography practices such as optical patterning as well as repeated etching and deposition protocols and opens up a new approach for device development. Nanoimprint lithography (NIL) silsesquioxane (SSQ)-based trenches were utilized in order to align a cylinder forming poly(styrene)-block-poly(4-vinylpyridine) (PS-b-P4VP) BCP soft template. We outline WO₃ nanowire fabrication using a spin-on process and the symmetric current-voltage characteristics of the resulting Ti/Au (5 nm/45 nm) contacted WO₃ nanowires. The results highlight the simplicity of a solution-based approach that allows creating active device elements and controlling the chemistry of specific self-assembling building blocks. The process enables one to dictate nanoscale chemistry with an unprecedented level of sophistication, forging the way for next-generation nanoelectronic devices. We lastly outline views and future research studies towards improving the current platform to achieve the desired device performance.

Carbohydrate-Based Block Copolymer Thin Films: Ultrafast Nano-Organization with 7 nm Resolution Using Microwave Energy

Block copolymers (BCP) can self-assemble into nanoscale patterns with a wide variety of applications in the semiconductor industry. The self-assembly of BCPs is commonly accomplished by solvent vapor or thermal annealing, but generally these methods require long time (few hours) to obtain nanostructured thin films. In this contribution, a new and ultrafast method (using microwaves) is proposed-high temperature solvent vapor annealing (HTSVA), combining solvent vapor annealing with thermal annealing, to achieve fast and controllable self-assembly of amphiphilic BCP thin films. A promising carbohydrate-based BCP capable of forming cylindrical patterns with some of the smallest feature sizes is used for demonstrating how to obtain a highly ordered vertical cylindrical pattern with sub-10 nm feature sizes in few seconds by HTSVA. HTSVA provides not only a simple way to achieve BCP fast self-assembly in practical applications but also a tool to study the self-assembly behavior of BCPs under extreme conditions.

Mechanically-Guided Deterministic Assembly of 3D Mesostructures Assisted by Residual Stresses

Formation of 3D mesostructures in advanced functional materials is of growing interest due to the widespread envisioned applications of devices that exploit 3D architectures. Mechanically guided assembly based on compressive buckling of 2D precursors represents a promising method, with applicability to a diverse set of geometries and materials, including inorganic semiconductors, metals, polymers, and their heterogeneous combinations. This paper introduces ideas that extend the levels of control and the range of 3D layouts that are achievable in this manner. Here, thin, patterned layers with well-defined residual stresses influence the process of 2D to 3D geometric transformation. Systematic studies through combined analytical modeling, numerical simulations, and experimental observations demonstrate the effectiveness of the proposed strategy through ≈20 example cases with a broad range of complex 3D topologies. The results elucidate the ability of these stressed layers to alter the energy landscape associated with the transformation process and, specifically, the energy barriers that separate different stable modes in the final 3D configurations. A demonstration in a mechanically tunable microbalance illustrates the utility of these ideas in a simple structure designed for mass measurement.

A microcube-based hybrid piezocomposite as a flexible energy generator

The performance of a composite-type piezoelectric energy harvester can be highly enhanced by the shape of filler particles.

Amphiphilic acrylamide block copolymer: RAFT block copolymerization and monolayer behaviour

Amphiphilic acrylamide block copolymer, synthesized by RAFT polymerization, takes a stable monolayer formation with phase-separated structures at the air–water interface.

In-plane oriented highly ordered lamellar structure formation of poly(N-dodecylacrylamide) induced by humid annealing

Highly oriented and ordered lamellar polymer film was prepared by simply annealing the poly(N-dodecylacrylamide) film under humid conditions.

Rapid ordering of block copolymer thin films

Block-copolymers self-assemble into diverse morphologies, where nanoscale order can be finely tuned via block architecture and processing conditions. However, the ultimate usage of these materials in real-world applications may be hampered by the extremely long thermal annealing times-hours or days-required to achieve good order. Here, we provide an overview of the fundamentals of block-copolymer self-assembly kinetics, and review the techniques that have been demonstrated to influence, and enhance, these ordering kinetics. We discuss the inherent tradeoffs between oven annealing, solvent annealing, microwave annealing, zone annealing, and other directed self-assembly methods; including an assessment of spatial and temporal characteristics. We also review both real-space and reciprocal-space analysis techniques for quantifying order in these systems.

Controlled self-organization of cyanostilbene: emission tuning and photo-responsiveness

Cyanostilbene modified with dimethylaniline (CMD) could self-assemble into vesicles and fibrous morphologies depending on the solvophobic properties. Furthermore, morphology of well-defined nanostructures could be changed with enhanced emission triggered by the photo-isomerization of cyanostilbene. The present system has potential for building luminescent color conversion materials.

Strategies for Inorganic Incorporation using Neat Block Copolymer Thin Films for Etch Mask Function and Nanotechnological Application

Block copolymers (BCPs) and their directed self-assembly (DSA) has emerged as a realizable complementary tool to aid optical patterning of device elements for future integrated circuit advancements. Methods to enhance BCP etch contrast for DSA application and further potential applications of inorganic nanomaterial features (e.g., semiconductor, dielectric, metal and metal oxide) are examined. Strategies to modify, infiltrate and controllably deposit inorganic materials by utilizing neat self-assembled BCP thin films open a rich design space to fabricate functional features in the nanoscale regime. An understanding and overview on innovative ways for the selective inclusion/infiltration or deposition of inorganic moieties in microphase separated BCP nanopatterns is provided. Early initial inclusion methods in the field and exciting contemporary reports to further augment etch contrast in BCPs for pattern transfer application are described. Specifically, the use of evaporation and sputtering methods, atomic layer deposition, sequential infiltration synthesis, metal-salt inclusion and aqueous metal reduction methodologies forming isolated nanofeatures are highlighted in di-BCP systems. Functionalities and newly reported uses for electronic and non-electronic technologies based on the inherent properties of incorporated inorganic nanostructures using di-BCP templates are highlighted. We outline the potential for extension of incorporation methods to triblock copolymer features for more diverse applications. Challenges and emerging areas of interest for inorganic infiltration of BCPs are also discussed.

A One-Structure-Based Hybridized Nanogenerator for Scavenging Mechanical and Thermal Energies by Triboelectric-Piezoelectric-Pyroelectric Effects

A hybridized nanogenerator is demonstrated, which has the structure of PVDF nanowires-PDMS composite film/indium tin oxide (ITO) electrode/polarized PVDF film/ITO electrode, and which can individually/simultaneously scavenge mechanical and thermal energies using piezoelectric, triboelectric, and pyroelectric effects. As compared with the individual energy harvesting unit, the hybridized nanogenerator has a much better charging performance. This work may push forward a significant step toward multienergy harvesting technology.

Magnetic-Assisted Noncontact Triboelectric Nanogenerator Converting Mechanical Energy into Electricity and Light Emissions

A magnetic-assisted noncontact triboelectric nanogenerator (TENG) is developed by combining a magnetic responsive layer with a TENG. The novel TENG device is applied to harvest mechanical energy which can be converted into electricity and light emissions. This work has potential for energy harvesting, magnetic sensors, self-powered electronics and optoelectronics applications.

Nitrogen-Doped Porous Carbon Superstructures Derived from Hierarchical Assembly of Polyimide Nanosheets

3D carbon superstructures are fabricated through the hierarchical assembly of polyimide nanosheets and thermal treatment. Benefiting from the ultrahigh surface area and the hierarchically porous structure, along with the well-distributed highly electroactive sites, the flower-like carbon material exhibits outstanding catalytic activity toward the oxygen reduction reaction and also serves as a highly stable electrode material in supercapacitors.

Directed Self-Assembly of Block Copolymers for High Breakdown Strength Polymer Film Capacitors

Emerging needs for fast charge/discharge yet high-power, lightweight, and flexible electronics requires the use of polymer-film-based solid-state capacitors with high energy densities. Fast charge/discharge rates of film capacitors on the order of microseconds are not achievable with slower charging conventional batteries, supercapacitors and related hybrid technologies. However, the current energy densities of polymer film capacitors fall short of rising demand, and could be significantly enhanced by increasing the breakdown strength (EBD) and dielectric permittivity (εr) of the polymer films. Co-extruded two-homopolymer component multilayered films have demonstrated much promise in this regard showing higher EBD over that of component polymers. Multilayered films can also help incorporate functional features besides energy storage, such as enhanced optical, mechanical, thermal and barrier properties. In this work, we report accomplishing multilayer, multicomponent block copolymer dielectric films (BCDF) with soft-shear driven highly oriented self-assembled lamellar diblock copolymers (BCP) as a novel application of this important class of self-assembling materials. Results of a model PS-b-PMMA system show ∼50% enhancement in EBD of self-assembled multilayer lamellar BCP films compared to unordered as-cast films, indicating that the breakdown is highly sensitive to the nanostructure of the BCP. The enhancement in EBD is attributed to the "barrier effect", where the multiple interfaces between the lamellae block components act as barriers to the dielectric breakdown through the film. The increase in EBD corresponds to more than doubling the energy storage capacity using a straightforward directed self-assembly strategy. This approach opens a new nanomaterial paradigm for designing high energy density dielectric materials.

In situ dispersion of oil-based Ag nanocolloids by microdroplet coalescence and their applications in SERS detection

Monodispersity and size uniformity of the nanoparticles coated on film-like nanosensors are critical for detection efficiency.