From Bimetallic Metal-Organic Framework to Porous Carbon: High Surface Area and Multicomponent Active Dopants for Excellent Electrocatalysis

Bifunctional ligand Co metal-organic framework derived heterostructured Co-based nanocomposites as oxygen electrocatalysts toward rechargeable zinc-air batteries

Rational construction of efficient and robust bifunctional oxygen electrocatalysts is key but challenging for the widespread application of rechargeable zinc-air batteries (ZABs). Herein, bifunctional ligand Co metal-organic frameworks were first explored to fabricate a hybrid of heterostructured CoOx/Co nanoparticles anchored on a carbon substrate rich in CoNx sites (CoOx/Co@CoNC) via a one-step pyrolysis method. Such a unique heterostructure provides abundant CoNx and CoOx/Co active sites to drive oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), respectively. Besides, their positive synergies facilitate electron transfer and optimize charge/mass transportation. Consequently, the obtained CoOx/Co@CoNC exhibits a superior ORR activity with a higher half-wave potential of 0.88 V than Pt/C (0.83 V vs. RHE), and a comparable OER performance with an overpotential of 346 mV at 10 mA cm-2 to the commercial RuO2. The assembled ZAB using CoOx/Co@CoNC as a cathode catalyst displays a maximum power density of 168.4 mW cm-2, and excellent charge-discharge cyclability over 250 h at 5 mA cm-2. This work highlights the great potential of heterostructures in oxygen electrocatalysis and provides a new pathway for designing efficient bifunctional oxygen catalysts toward rechargeable ZABs.

From waste corn straw to graphitic porous carbon: A trade-off between specific surface area and graphitization degree for efficient peroxydisulfate activation

Electron transfer pathways have been verified as overriding regimes when peroxydisulfate (PDS) was activated by porous carbon. The incorporation of graphitic structure into carbon matrix was favorable to the rapid electron transfer, but excessive graphitization would deteriorate the specific surface area (SSA), weakening the catalytic performance. The reasonable trade-off between SSA and graphitization degree was necessary and challenging for the preparation of efficient carbon based PS-activators. Herein, a series of graphitic porous carbon with discrepant SSA and graphitic structure were fabricated. The incorporation of graphitization tracks into ultra-thin edges on porous carbon film was verified by multifarious structural characterization. After trade-off, the optimum catalyst exhibited superior catalytic performance with degradation rate constant (kobs) exceeding that of ungraphitized precursor by up to 16.0 times. Mechanistic investigations substantiated that the sufficient SSA of catalyst provided favorable conditions for its affinity towards PDS and sulfadiazine (SDZ), resulting in the formation of PDS* complexes and SDZ adsorption, while the appropriate graphitization degree ensured the reinforced electron transfer rate, which collectively accelerated SDZ oxidation through electron-transfer pathway. The multivariate linear regression model linking kobs to SSA and graphitization degree was established providing basis to construct efficient catalysts for PDS activation.

Surprising Route to a Monoazaporphyrin and Full Characterization of Its Complexes with Five Different 3d Metals

In the search for mild agents for the oxidative cyclization of tetrapyrromethane to the corresponding corrole, we discovered a route that leads to a monoazaporphyrin with three meso-CF3 groups. Optimization studies that allowed access to appreciable amounts of this new macrocycle paved the way for the preparation of its cobalt, copper, nickel, zinc, and iron complexes. All complexes were fully characterized by various spectroscopic methods and X-ray crystallography. Their photophysical and electrochemical properties were determined and compared to those of analogous porphyrins in order to deduce the effect of the peripheral N atom. Considering the global efforts for designing efficient alternatives to platinum group metal (PGM) catalysts, they were also absorbed onto a porous carbon electrode material and studied as electrocatalysts for the oxygen reduction reaction (ORR). The cobalt complex was found to be operative at a quite positive catalytic onset potential and with good selectivity for the desirable 4-electrons/4-protons pathway.

Phosphorus-rich CoP4@N-C nanoarrays for efficient nitrate-to-ammonia electroreduction

The electrochemical nitrate reduction reaction (NO3-RR) is a novel green method for ammonia synthesis. However, the lack of sufficient catalysts has hindered the development of the NO3-RR. This research develops a transformation of porous CoP@N-C/CC into porous phosphorus-rich CoP4@N-C/CC through high-temperature calcination. Due to its unique phosphating-rich structure, CoP4@N-C/CC exhibits an excellent Faraday efficiency (FE: 92.3%) and NH3 yield (610.2 μmol h-1 cm-2). Such a catalyst with more P-P bonds can provide more active sites, effectively enhancing the adsorption and reaction processes of reactant molecules. In addition, the catalyst has good durability and catalytic stability, which provides a possibility for the future application of electrocatalytic ammonia production.

Constructing Directional Electrostatic Potential Difference via Gradient Nitrogen Doping for Efficient Oxygen Reduction Reaction

Nitrogen doping has been recognized as an important strategy to enhance the oxygen reduction reaction (ORR) activity of carbon-encapsulated transition metal catalysts (TM@C). However, previous reports on nitrogen doping have tended to result in a random distribution of nitrogen atoms, which leads to disordered electrostatic potential differences on the surface of carbon layers, limiting further control over the materials' electronic structure. Herein, a gradient nitrogen doping strategy to prepare nitrogen-deficient graphene and nitrogen-rich carbon nanotubes encapsulated cobalt nanoparticles catalysts (Co@CNTs@NG) is proposed. The unique gradient nitrogen doping leads to a gradual increase in the electrostatic potential of the carbon layer from the nitrogen-rich region to the nitrogen-deficient region, facilitating the directed electron transfer within these layers and ultimately optimizing the charge distribution of the material. Therefore, this strategy effectively regulates the density of state and work function of the material, further optimizing the adsorption of oxygen-containing intermediates and enhancing ORR activity. Theoretical and experimental results show that under controlled gradient nitrogen doping, Co@CNTs@NG exhibits significantly ORR performance (Eonset = 0.96 V, E1/2 = 0.86 V). At the same time, Co@CNTs@NG also displays excellent performance as a cathode material for Zn-air batteries, with peak power density of 132.65 mA cm-2 and open-circuit voltage (OCV) of 1.51 V. This work provides an effective gradient nitrogen doping strategy to optimize the ORR performance.

Nanoarchitectonics of Bimetallic Cu-/Co-Doped Nitrogen-Carbon Nanozyme-Functionalized Hydrogel with NIR-Responsive Phototherapy for Synergistic Mitigation of Drug-Resistant Bacterial Infections

Superbug infections and transmission have become major challenges in the contemporary medical field. The development of novel antibacterial strategies to efficiently treat bacterial infections and conquer the problem of antimicrobial resistance (AMR) is extremely important. In this paper, a bimetallic CuCo-doped nitrogen-carbon nanozyme-functionalized hydrogel (CuCo/NC-HG) has been successfully constructed. It exhibits photoresponsive-enhanced enzymatic effects under near-infrared (NIR) irradiation (808 nm) with strong peroxidase (POD)-like and oxidase (OXD)-like activities. Upon NIR irradiation, CuCo/NC-HG possesses photodynamic activity for producing singlet oxygen(1O2), and it also has a high photothermal conversion effect, which not only facilitates the elimination of bacteria but also improves the efficiency of reactive oxygen species (ROS) production and accelerates the consumption of GSH. CuCo/NC-HG shows a lower hemolytic rate and better cytocompatibility than CuCo/NC and possesses a positive charge and macroporous skeleton for restricting negatively charged bacteria in the range of ROS destruction, strengthening the antibacterial efficiency. Comparatively, CuCo/NC and CuCo/NC-HG have stronger bactericidal ability against methicillin-resistant Staphylococcus aureus (MRSA) and ampicillin-resistant Escherichia coli (AmprE. coli) through destroying the cell membranes with a negligible occurrence of AMR. More importantly, CuCo/NC-HG plus NIR irradiation can exhibit satisfactory bactericidal performance in the absence of H2O2, avoiding the toxicity from high-concentration H2O2. In vivo evaluation has been conducted using a mouse wound infection model and histological analyses, and the results show that CuCo/NC-HG upon NIR irradiation can efficiently suppress bacterial infections and promote wound healing, without causing inflammation and tissue adhesions.

Thermally activated structural phase transitions and processes in metal-organic frameworks

The structural knowledge of metal-organic frameworks is crucial to the understanding and development of new efficient materials for industrial implementation. This review classifies and discusses recent advanced literature reports on phase transitions that occur during thermal treatments on metal-organic frameworks and their characterisation. Thermally activated phase transitions and procceses are classified according to the temperaturatures at which they occur: high temperature (reversible and non-reversible) and low temperature. In addition, theoretical calculations and modelling approaches employed to better understand these structural phase transitions are also reviewed.

Small-size and well-dispersed Fe nanoparticles embedded in carbon rods for efficient oxygen reduction reaction

The preparation of ultra-small and well-dispersed metal nanoparticles (NPs) is of great importance for promoting oxygen reduction. Here, a metal (Fe and Zn) NP (7 nm) based catalyst derived from a Zn-based metal-organic framework was obtained by a vapor adsorption strategy, demonstrating a high half-wave potential (0.868 V) and power density (196 mW cm-2).

Anchoring Ultrafine β-Mo2C Clusters Inside Porous Co-NC Using MOFs for Electric-Powered Coproduction of Valuable Chemicals

Electroredox of organics provides a promising and green approach to producing value-added chemicals. However, it remains a grand challenge to achieve high selectivity of desired products simultaneously at two electrodes, especially for non-isoelectronic transfer reactions. Here a porous heterostructure of Mo2C@Co-NC is successfully fabricated, where subnanometre β-Mo2C clusters (<1 nm, ≈10 wt%) are confined inside porous Co, N-doped carbon using metalorganic frameworks. It is found that Co species not only promote the formation of β-Mo2C but also can prevent it from oxidation by constructing the heterojunctions. As noted, the heterostructure achieves >96% yield and 92% Faradaic efficiency (FE) for aldehydes in anodic alcohol oxidation, as well as >99.9% yield and 96% FE for amines in cathodal nitrocompounds reduction in 1.0 M KOH. Precise control of the reaction kinetics of two half-reactions by the electronic interaction between β-Mo2C and Co is a crucial adjective. Density functional theory (DFT) gives in-depth mechanistic insight into the high aldehyde selectivity. The work guides authors to reveal the electrooxidation nature of Mo2C at a subnanometer level. It is anticipated that the strategy will provide new insights into the design of highly effective bifunctional electrocatalysts for the coproduction of more complex fine chemicals.

Metal-Organic-Framework-Derived Bromine and Nitrogen Dual-Doped Porous Carbon for CO2 Photocycloaddition Reaction

The cycloaddition of CO2 with epoxides driven by light irradiation is an intriguing approach to preparing cyclic carbonates. However, it remains a great challenge to achieve high photocatalytic efficiency in the absence of a cocatalyst. Herein, we explored a metal-organic-framework (MOF)-templated pyrolysis strategy to prepare uniform bromine ions/nitrogen-codoped carbon materials (Br-CN) as low-cost photocatalysts for CO2 cycloaddition. The optimal catalyst Br-CN-1-550 can be used as a photocatalyst to catalyze CO2 cycloaddition, remarkably reducing the energy consumption. As a result of its benefits of high photothermal efficiency and rich nucleophilic sites (Br ions), BN-CN-1-550 affords a 9 times higher yield of 4-(chloromethyl)-1,3-dioxolan-2-one than that of the ZIF-8-derived CN under cocatalyst-free conditions and light irradiation (300 mW·cm-2 full-spectrum irradiation, 10 h). This strategy provides a cost-effective way to obtain cyclic carbonate under cocatalyst-free conditions.

Bimetallic metal-organic framework-derived bamboo-like N-doped carbon nanotube-encapsulated Ni-doped MoC nanoparticles for water oxidation

Molybdenum carbide materials with unique electronic structures have received special attention as water-splitting catalysts, but their structural stability in the alkaline water electrolysis process is not satisfactory. This study reports an in situ pyrolysis method for preparing NiMo-based metal-organic framework (MOF)-derived chain-mail oxygen evolution reaction (OER) electrocatalysts and bamboo-like N-doped carbon nanotube (NCNT)-encapsulated Ni-doped MoC nanoparticles (NiMoC-NCNTs). The NCNTs can provide chain mail shells to protect the inner highly reactive Ni-doped MoC cores from electrochemical corrosion by the alkaline electrolyte and regulate their catalytic properties through charge redistribution. Benefiting from high N-doping with abundant pyridinic moieties and abundant active sites of the periodic bamboo-like nodes, the as-prepared NiMoC-NCNTs display an outstanding activity for the OER with an overpotential of 310 mV at 10 mA cm-2 and a superior long-term stability of 50 h. Density functional theory calculations reveal that the excellent electrocatalytic activity of NiMoC-NCNTs comes from the electron transfer from NiMoC nanoparticles to NCNTs, resulting in a decrease in the local work function at the carbon surface and optimized free efficiencies of OER intermediates on C sites. This work provides an effective approach to improve the structural stability of fragile catalysts by equipping them with carbon-based chain.

Approaches to Improving the Selectivity of Nanozymes

Nanozymes mimic enzymes and that includes their selectivity. To achieve selectivity, significant inspiration for nanoparticle design can come from the geometric and molecular features that make enzymes selective catalysts. The two central features enzymes use are control over the arrangement of atoms in the active site and the placing of the active site down a nanoconfined substrate channel. The implementation of enzyme-inspired features has already been shown to both improve activity and selectivity of nanoparticles for a variety of catalytic and sensing applications. The tuning and control of active sites on metal nanoparticle surfaces ranges from simply changing the composition of the surface metal to sophisticated approaches such as the immobilization of single atoms on a metal substrate. Molecular frameworks provide a powerful platform for the implementation of isolated and discrete active sites while unique diffusional environments further improve selectivity. The implementation of nanoconfined substrate channels around these highly controlled active sites offers further ability to control selectivity through altering the solution environment and transport of reactants and products. Implementing these strategies together offers a unique opportunity to improve nanozyme selectivity in both sensing and catalysis.

Atomically Dispersed Zn/Co-N-C as ORR Electrocatalysts for Alkaline Fuel Cells

Hydrogen fuel cells have drawn increasing attention as one of the most promising next-generation power sources for future automotive transportation. Developing efficient, durable, and low-cost electrocatalysts, to accelerate the sluggish oxygen reduction reaction (ORR) kinetics, is urgently needed to advance fuel cell technologies. Herein, we report on metal-organic frameworks-derived nonprecious dual metal single-atom catalysts (SACs) (Zn/Co-N-C), consisting of Co-N4 and Zn-N4 local structures. These catalysts exhibited superior ORR activity with a half-wave potential (E1/2) of 0.938 V versus RHE (reversible hydrogen electrode) and robust stability (ΔE1/2 = -8.5 mV) after 50k electrochemical cycles. Moreover, this remarkable performance was validated under realistic fuel cell working conditions, achieving a record-high peak power density of ∼1 W cm-2 among the reported SACs for alkaline fuel cells. Operando X-ray absorption spectroscopy was conducted to identify the active sites and reveal catalytic mechanistic insights. The results indicated that the Co atom in the Co-N4 structure was the main catalytically active center, where one axial oxygenated species binds to form an Oads-Co-N4 moiety during the ORR. In addition, theoretical studies, based on a potential-dependent microkinetic model and core-level shift calculations, showed good agreement with the experimental results and provided insights into the bonding of oxygen species on Co-N4 centers during the ORR. This work provides a comprehensive mechanistic understanding of the active sites in the Zn/Co-N-C catalysts and will pave the way for the future design and advancement of high-performance single-site electrocatalysts for fuel cells and other energy applications.

Boosted hydrogen evolution kinetics of heteroatom-doped carbons with isolated Zn as an accelerant

Carbon-based single-atom catalysts, a promising candidate in electrocatalysis, offer insights into electron-donating effects of metal center on adjacent atoms. Herein, we present a practical strategy to rationally design a model catalyst with a single zinc (Zn) atom coordinated with nitrogen and sulfur atoms in a multilevel carbon matrix. The Zn site exhibits an atomic interface configuration of ZnN4S1, where Zn's electron injection effect enables thermal-neutral hydrogen adsorption on neighboring atoms, pushing the activity boundaries of carbon electrocatalysts toward electrochemical hydrogen evolution to an unprecedented level. Experimental and theoretical analyses confirm the low-barrier Volmer-Tafel mechanism of proton reduction, while the multishell hollow structures facilitate the hydrogen evolution even at high current intensities. This work provides insights for understanding the actual active species during hydrogen evolution reaction and paves the way for designing high-performance electrocatalysts.

Heterostructured Co/CeO2-Decorating N-Doped Porous Carbon Nanocubes as Efficient Sulfur Hosts with Enhanced Rate Capability and Cycling Durability toward Room-Temperature Na-S Batteries

Room-temperature sodium-sulfur (RT Na-S) batteries have gained significant interest thanks to their satisfactory energy density and abundant earth resources. Nevertheless, practical implementations of RT Na-S batteries are still impeded by serious shuttle effects of sodium polysulfide (NaPS) intermediates, sluggish redox kinetics of cathodes, and poor electronic conductivity from S-species. To solve these problems, heterostructured Co/CeO2-decorating N-doped porous carbon nanocubes (Co/CeO2-NPC) are constructed as a S support, which integrates the strong adsorption and fast conversion of NaPSs, together with superior electronic conductivity. Consequently, the as-synthesized S@Co/CeO2-NPC cathode for RT Na-S batteries exhibits improved rate performance (1275, 561.1, and 485 mAh g-1 at 0.1, 5, and 10 C, respectively) and superior cyclic durability (capacity degeneration of 0.027% per cycle after 1000 cycles at 5 C). Such a S cathode combining a heterostructure interface, hierarchical porous carbon nanocubes, and polar compositions can considerably increase electronic conductivity and promote NaPS adsorption and conversion, achieving superior performance toward RT Na-S batteries.

Three-Dimensional Nitrogen-Doped Carbonaceous Networks Anchored with Cobalt as Separator Modification Layers for Low-Polarization and Long-Lifespan Aluminum-Sulfur Batteries

Aluminum-sulfur (Al-S) batteries have attracted extensive interest due to their high theoretical energy density, inherent safety, and low cost. However, severe polarization and poor cycling performance significantly limit the development of Al-S batteries. Herein, three-dimensional (3D) nitrogen-doped carbonaceous networks anchored with cobalt (Co@CMel-ZIF) is proposed as a separator modification layer to mitigate these issues, prepared via carbonizations of a mixture of ZIF-7, melamine, and CoCl2. It exhibits a 3D network structure with a moderate surface area and high average pore diameter, which is demonstrated to be effective in adsorbing the aluminum polysulfides and hindering the mobility of polysulfides across the separator for enhanced cyclic stability of Al-S batteries. Meanwhile, Co@CMel-ZIF are characterized by abundant catalytic pyridinic-N and Co-Nx active sites that effectively eliminate the barrier of sulfides' conversion and thereby facilitate the polarization reduction. As a result, Al-S cells based on the separator modified with Co@CMel-ZIF exhibit a low voltage polarization of 0.47 V under the current density of 50 mA g-1 at 20 °C and a high discharge specific capacity of 503 mAh g-1 after 150 cycles. In contrast, the cell employing a bare separator exhibits a polarization of 1.01 V and a discharge capacity of 300 mAh g-1 after 70 cycles under the same conditions. This work demonstrates that modifying the separators is a promising strategy to mitigate the high polarization and poor cyclability of Al-S batteries.

Active Center Size-Dependent Fenton-Like Chemistry for Sustainable Water Decontamination

Accurately controlling catalytic activity and mechanism as well as identifying structure-activity-selectivity correlations in Fenton-like chemistry is essential for designing high-performance catalysts for sustainable water decontamination. Herein, active center size-dependent catalysts with single cobalt atoms (CoSA), atomic clusters (CoAC), and nanoparticles (CoNP) were fabricated to realize the changeover of catalytic activity and mechanism in peroxymonosulfate (PMS)-based Fenton-like chemistry. Catalytic activity and durability vary with the change in metal active center sizes. Besides, reducing the metal size from nanoparticles to single atoms significantly modulates contributions of radical and nonradical mechanisms, thus achieving selective/nonselective degradation. Density functional theory calculations reveal evolutions in catalytic mechanisms of size-dependent catalytic systems over different Gibbs free energies for reactive oxygen species generation. Single-atom site contact with PMS is preferred to induce nonradical mechanisms, while PMS dissociates and generates radicals on clusters and nanoparticles. Differences originating from reaction mechanisms endow developed systems with size-dependent selectivity and mineralization for treating actual hospital wastewater in column reactors. This work brings an in-depth understanding of metal size effects in Fenton-like chemistry and guides the design of intelligent catalysts to fulfill the demand of specific scenes for water purification.

Intermetallic Nanocrystals for Fuel-Cells-Based Electrocatalysis

Electrocatalysis underpins the renewable electrochemical conversions for sustainability, which further replies on metallic nanocrystals as vital electrocatalysts. Intermetallic nanocrystals have been known to show distinct properties compared to their disordered counterparts, and been long explored for functional improvements. Tremendous progresses have been made in the past few years, with notable trend of more precise engineering down to an atomic level and the investigation transferring into more practical membrane electrode assembly (MEA), which motivates this timely review. After addressing the basic thermodynamic and kinetic fundamentals, we discuss classic and latest synthetic strategies that enable not only the formation of intermetallic phase but also the rational control of other catalysis-determinant structural parameters, such as size and morphology. We also demonstrate the emerging intermetallic nanomaterials for potentially further advancement in energy electrocatalysis. Then, we discuss the state-of-the-art characterizations and representative intermetallic electrocatalysts with emphasis on oxygen reduction reaction evaluated in a MEA setup. We summarize this review by laying out existing challenges and offering perspective on future research directions toward practicing intermetallic electrocatalysts for energy conversions.

Zn/N/S Co-doped hierarchical porous carbon as a high-efficiency oxygen reduction catalyst in Zn-air batteries

Zn-N-C catalysts have garnered attention as potential electrocatalysts for the oxygen reduction reaction (ORR). However, their intrinsic limitations, including poor activity and a low density of active sites, continue to hinder their electrocatalytic performance. In this study, we have devised a dual-template strategy for the synthesis of Zn, N, S co-doped nanoporous carbon-based catalysts (Zn-N/S-C(S, Z)) with a substantial specific surface area and a graded pore structure. The introduction of S enhances electron localization around the Zn-Nx active centers, facilitating interactions with oxygen-containing substances. The resulting Zn-N/S-C(S, Z) sample exhibits outstanding performance in an alkaline solution, demonstrating a half-wave potential of 0.89 V. This value surpasses that of commercial Pt/C by 40 mV. Furthermore, when combined with RuO2 (Zn-N/S-C(S, Z) + RuO2), the catalyst demonstrates exceptional performance in a Zn-air battery, offering an open-circuit voltage (OCV) of 1.47 V and a peak power density of 290.8 mW cm-2. This study paves the way for the development of highly dispersed and highly active Zn-metal site catalysts, potentially replacing traditional Pt-based catalysts in various electrochemical devices.

Electronic Asymmetry Engineering of Fe-N-C Electrocatalyst via Adjacent Carbon Vacancy for Boosting Oxygen Reduction Reaction

Single-atomic transition metal-nitrogen-carbon (M-N-C) structures are promising alternatives toward noble-metal-based catalysts for oxygen reduction reaction (ORR) catalysis involved in sustainable energy devices. The symmetrical electronic density distribution of the M─N4 moieties, however, leads to unfavorable intermediate adsorption and sluggish kinetics. Herein, a Fe-N-C catalyst with electronic asymmetry induced by one nearest carbon vacancy adjacent to Fe─N4 is conceptually produced, which induces an optimized d-band center, lowered free energy barrier, and thus superior ORR activity with a half-wave potential (E1/2 ) of 0.934 V in a challenging acidic solution and 0.901 V in an alkaline solution. When assembled as the cathode of a Zinc-air battery (ZAB), a peak power density of 218 mW cm-2 and long-term durability up to 200 h are recorded, 1.5 times higher than the noble metal-based Pt/C+RuO2 catalyst. This work provides a new strategy on developing efficient M-N-C catalysts and offers an opportunity for the real-world application of fuel cells and metal-air batteries.

Open-Mouthed Hollow Carbons: Systematic Studies as Cobalt- and Nitrogen-Doped Carbon Electrocatalysts for Oxygen Reduction Reaction

Although hollow carbon structures have been extensively studied in recent years, their interior surfaces are not fully utilized due to the lack of fluent porous channels in the closed shell walls. This study presents a tailored design of open-mouthed particles hollow cobalt/nitrogen-doped carbon with mesoporous shells (OMH-Co/NC), which exhibits sufficient accessibility and electroactivity on both the inner and outer surfaces. By leveraging the self-conglobation effect of metal sulfate in methanol, a raspberry-structured Zn/Co-ZIF (R-Zn/Co-ZIF) precursor is obtained, which is further carbonized to fabricate the OMH-Co/NC. In-depth electrochemical investigations demonstrate that the introduction of open pores can enhance mass transfer and improve the utilization of the inner active sites. Benefiting from its unique structure, the resulting OMH-Co/NC exhibits exceptional electrocatalytic oxygen reduction performance, achieving a half-wave potential of 0.865 V and demonstrating excellent durability.

A non-enzymatic glucose sensor based on a mesoporous carbon sphere immobilized Co-MOF-74 nanocomposite

Exploration of credible non-enzymatic glucose sensors with high selectivity and sensitivity is of great significance for early clinical monitoring of glucose concentration and preventing the threat of diabetes to human health. Here, mesoporous carbon (MC) sphere immobilized Co-MOF-74 nanorods (NRs), denoted as Co-MOF-74 NRs/MC, were successfully prepared, in which the nanostructural porous carbon sphere was obtained using cobalt glycolate as the built-in template followed by a subsequent carbonization and acid treatment, and the MC spheres were then in situ deposited on the surface of Co-MOF-74 NRs via a solvothermal method. Benefiting from the good conductivity of the grafted porous carbon spheres and the abundant active sites, as well as the permeability of microporous MOF-74 nanocrystals, the Co-MOF-74 NRs/MC modified glassy carbon electrode (GCE) exhibited effective non-enzymatic glucose sensing performance with a fast response time (less than 3 s) and a glucose sensitivity of 98.0 μA cm-2 mM-1. Furthermore, the Co-MOF-74 NRs/MC/GCE showed a favourable anti-interference capability in the presence of various interferents and good long-term reusability. The applicability of Co-MOF-74 NRs/MC/GCE for glucose sensing in real serum samples was also investigated, verifying the applicability of the electrode for targeted glucose monitoring in practical applications.

Cu2+@metal-organic framework-derived amphiphilic sandwich catalysts for enhanced hydrogenation selectivity of ketenes at the oil-water interface

Selective catalysis has always been an essential process for manufacturing various fine chemicals, such as food additives, pharmaceuticals and perfumes. Practically, pure target products are difficult to obtain even after complex purification procedures during industrial production. The development of a cost-effective, highly chemoselective and long-life catalyst may be an attractive solution, but such a catalyst is elusive. Herein, a novel class of amphiphilic N-doped carbon (NC), featuring graphitic carbon (GC) and highly dispersed Cu@Co NPs, was fabricated via simple calcination of a Cu2+-doped bimetallic metal-organic framework (MOF) precusor directly. Compared with monometallic Co@GC/NC, the side reaction of CO bond hydrogenation is obviously restrained, and thus, pure target product can be systematically obtained by Cu@Co@GC/NC, highlighting the high selectivity of Cu. More importantly, an amphiphilic characteristic in Cu@Co@GC/NC is a significant knob to integrate organic substrates with water very well. This amphiphilic material shows great potential as a field-deployable pathway for dispersible metal catalysts in organic systems.

Cobalt nanoparticles-catalyzed aerobic oxygenation and esterification of alkynes via C≡C bonds cleavage

An unprecedented efficient protocol is developed for the oxidative cleavage of C≡C bonds in alkynes to produce structure-diverse esters using heterogeneous cobalt nanoparticles as catalyst with molecular oxygen as the oxidant. A diverse set of mono- and multisubstituted aromatic and aliphatic alkynes can be effectively cleaved and converted into the corresponding esters. Characterization analysis and control experiments indicate high surface area and pore volume, as well as nanostructured nitrogen-doped graphene-layer coated cobalt nanoparticles are possibly responsible for excellent catalytic activity. Mechanistic studies reveal that ketones derived from alkynes under oxidative conditions are formed as intermediates, which subsequently are converted to esters through a tandem sequential process. The catalyst can be recycled up to five times without significant loss of activity.

A bimetallic Fe-Mg MOF with a dual role as an electrode in asymmetric supercapacitors and an efficient electrocatalyst for hydrogen evolution reaction (HER)

In this work, a novel bimetallic Fe-Mg/MOF was synthesized through a cost-effective and rapid hydrothermal process. The structure, morphology, and composition were examined using X-ray diffraction (XRD), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy. Further, the Brunauer-Emmett-Teller (BET) measurement showed a 324 m2 g-1 surface area for Fe-Mg/MOF. The Fe-Mg/MOF achieved 1825 C g-1 capacity at 1.2 A g-1 current density, which is higher than simple Fe-MOF (1144 C g-1) and Mg-MOF (1401 C g-1). To assess the long-term stability of the asymmetric device, the bimetallic MOF supercapattery underwent 1000 charge/discharge cycles and retained 85% of its initial capacity. The energy and power densities were calculated to be 57 W h kg-1 and 2393 W kg-1, respectively. Additionally, Fe-Mg/MOF showed superior electrocatalytic performance in hydrogen evolution reaction (HER) by demonstrating a smaller Tafel slope of 51.43 mV dec-1. Our research lays the foundation for enhancing the efficiency of energy storage technologies, paving the way for more sustainable and robust energy solutions.

Size and Electronic Effects on the Performance of (Corrolato)cobalt-Modified Electrodes for Oxygen Reduction Reaction Catalysis

Considering the worldwide efforts for designing catalysts that are not based on platinum group metals while still reserving the many advantages thereof, this study focused on the many variables that dictate the performance of cathodes used for fuel cells, regarding the efficient and selective reduction of oxygen to water. This was done by investigating two kinds of porous carbon electrodes, modified by molecular cobalt(III) complexes chelated by corroles that differ very much in size and electron-withdrawing capability. Examination of the electronic effect uncovered shifts in the CoII/CoIII redox potentials and also large differences in the affinity of the cobalt center to external ligands. Spontaneous absorption of the catalysts was found to depend on the size of the corrole's substituents (C6F5 ≫ CF3 ≫ H) and the metal's axial ligands (PPh3 versus pyridine), as well as on the porosity of the carbon electrodes (BP2000 > Vulcan). The better-performing cobalt-based catalysts were almost as active and selective as 20% platinum on Vulcan in terms of the onset potential and the only 2-10% undesirable formation of hydrogen peroxide. Durability was also addressed by using the best-performing modified cathode in a proper anion-exchange membrane fuel cell setup, revealing very little voltage change during 12 h of operation.

Engineering cuboctahedral N-doped C-coated p-CuO/n-TiO2 heterojunctions toward high-performance photocatalytic cross-dehydrogenative coupling

The low separation efficiency of photogenerated electron-hole (e-h) pairs severely limits the activation of photocatalyts. One brilliant strategy is to construct a p-n type semiconductor heterojunction, which can establish an inner electric field to separate the e-h pairs with high efficiency. Here, for the first time, a cuboctahedral N-doped carbon-coated CuO/TiO2 p-n heterojunction (CuO-TiO2@N-C) was designed and fabricated successfully via direct calcination of a benzimidazole-modulated cuboctahedral HKUST-Cu with titanium-tetraisopropanolate absorbed inside concomitantly. Full structural characterizations incorporating DFT computations demonstrate that the CuO/TiO2 p-n heterostructure can greatly boost the transport and separation of photoinduced e-h pairs. The nitrogen-doped carbon coating, with its excellent conductivity, porosity, stability and surface reaction activity, plays a pivotal role in promoting the overall performance and effectiveness of the reaction. The CuO-TiO2@N-C displays significantly higher photocurrent density (0.042 μA cm-2) than the CuO@N-C (0.014 μA cm-2) and TiO2@N-C (0.03 μA cm-2) electrodes, proving that the p-n heterojunction can improve the e-h generation efficiency. This unique photocatalyst affords superior photocatalytic efficiency, cycle stability and substrate scope towards cross-dehydrogenative coupling reactions.

Recent strategies for constructing hierarchical multicomponent nanoparticles/metal-organic framework hybrids and their applications

Hybrid nanoparticles with unique tailored morphologies and compositions can be utilized for numerous applications owing to their combination of inherent properties as well as the structural and supportive functions of each component. Controlled encapsulation of nanoparticles within nanospaces (NPNSs) of metal-organic frameworks (MOFs) (denoted as NPNS@MOF) can generate a large number of hybrid nanomaterials, facilitating superior activity in targeted applications. In this review, recent strategies for the fabrication of NPNS@MOFs with a hierarchical architecture, tailorability, unique intrinsic properties, and superior catalytic performance are summarized. In addition, the latest and most important examples in this sector are emphasized since they are more conducive to the practical applicability of NPNS@MOF nanohybrids.

Iron/iron carbide coupled with S, N co-doped porous carbon as effective oxygen reduction reaction catalyst for microbial fuel cells

As a novel energy device, microbial fuel cells (MFCs) have attracted much attention for their dual functions of electricity generation and sewage treatment. However, the sluggish oxygen reduction reaction (ORR) kinetic on the cathode have hindered the practical application of MFCs. In this work, metallic organic framework derived carbon framework co-doped by Fe, S, N tri-elements was used as alternative electrocatalyst to the conventional Pt/C cathode catalyst in pH-universal electrolytes. The amount of thiosemicarbazide from 0.3 to 3 g determined the surface chemical property, and therefore the ORR activity of FeSNC catalysts. The sulfur/nitrogen doping and Fe/Fe₃C embedded in carbon shell was characterized by X-ray photoelectron spectroscopy and transmission electron microscopy. The synergy of iron salt and thiosemicarbazide contributed to the improvement of nitrogen and sulfur doping. Sulfur atoms were successfully doped into the carbon matrix and formed a certain amount of thiophene- and oxidized-sulfur. The optimal FeSNC-3 catalyst synthesized with 1.5 g of thiosemicarbazide exhibited the highest ORR activity with a positive half wave potential of 0.866 V in alkaline and 0.691 V (vs. Reversible Hydrogen Electrode) in neutral electrolyte, which both outperformed the commercial Pt/C catalyst. However, as the amount of thiosemicarbazide surpassed 1.5 g, the catalytic performance of FeSNC-4 was lowered, and this could be assigned to the decreased defects and low specific surface area. The excellent ORR performance in neutral medium urged FeSNC-3 as good cathode catalyst in single chambered MFC (SCMFC). It showed the highest maximum power density of 2126 ± 100 mW m^-2, excellent output stability of 8.14% decline in 550 h, chemical oxygen demand removal of 90.7 ± 1.6% and coulombic efficiency of 12.5 ± 1.1%, all superior to those of benchmark SCMFC-Pt/C (1637 ± 35 mW m^-2, 15.4%, 88.9 ± 0.9%, and 10.2 ± 1.1%). These outstanding results were associated to the large specific surface area and synergistic interaction of multiple active sites, like Fe/Fe₃C, Fe-N₄, pyridinic N, graphite N and thiophene-S.

Designing a Hierarchical Porous Carbon with Optimized Nitrogen Doping for Efficient Oxygen Reduction Reaction

Nitrogen-doped carbon is considered one of the most promising oxygen reduction catalysts due to its low cost and high activity, however, it still falls short of Pt/C. In this study, we report a strategy for the preparation of highly reactive N-doped hierarchical porous carbon by primary pyrolysis using zinc acetate as a stand-alone zinc source and amino-rich reactants as carbon and nitrogen sources to introduce Zn-Nx structures into mesoporous structures generated by the hard template method using the strong coordination of zinc and amino groups. Benefited from the simultaneous optimization of the hierarchical porous structure and nitrogen-doping, the half-wave potential of Zn(OAc)2 -DCD/HPC is as high as 0.909 V vs. RHE, much better than that of commercial Pt/C catalysts (0.872 V vs. RHE). In addition, zinc-air batteries assembled with Zn(OAc)2 -DCD/HPC (Pmax =198 mW cm-2 ) as the cathode exhibit higher peak power density compared to Pt/C (Pmax =168 mW cm-2 ). This strategy might open up new opportunities for designing and developing highly active metal-free catalysts.

Niobium- and cobalt-modified dual-source-derived porous carbon with a honeycomb-like stable structure for supercapacitor and hydrogen evolution reaction

Designing porous carbon materials with tailored architecture and appropriate compositions is essential for supercapacitor (SC) and hydrogen evolution reaction (HER). Herein, Nb/Co-modified dual-source porous carbon (Nb/Co-DSPC) with a honeycomb structure was obtained by introducing a secondary carbon source (Co/Zn-ZIF) and transition metal Nb into activated Typha carbon (ATC). The addition of a secondary carbon source and Nb resulted in superior specific surface area (1272.38 m²/g), excellent hydrophilicity (34.73°) and abundant bimetallic active sites (Nb/Co-N_x) in Nb/Co-DSPC, providing excellent charge storage capacity and electrocatalytic activity. The Nb/Co-DSPC electrode displayed an outstanding capacitance of 337 F/g at 0.5 A/g and showed excellent stability after 15,000 charge-discharge cycles. In addition, Nb/Co-DSPC shows an overpotential of 114 mV at 10 mA cm^-2, better than those of Co-DSPC (139 mV) and ATC (162 mV) alone. This study offers a reliable strategy for advanced multifunctional porous carbon electrode materials preparations.

Iron-Doped Metal-Zinc-Centered Organic Framework Mesoporous Carbon Derivatives for Single-Wavelength NIR-Activated Photothermal/Photodynamic Synergistic Therapy

Recently, single-wavelength synergetic photothermal/photodynamic (PTT/PDT) therapy is beginning to make its mark in cancer treatment, and the key to it is a photosensitizer. In this work, an iron-doped metal-zinc-centered organic framework mesoporous carbon derivative (denoted as Fe_x-Zn-NC_T) with a similar porphyrin property was successfully synthesized by a mild, simple, and green aqueous reaction. The effects of different Fe contents and pyrolysis temperatures on the morphology, structure, and PTT/PDT of Fe_x-Zn-NC_T were investigated. Most importantly, we found that Fe₅₀-Zn-NC₉₀₀ exhibited excellent PTT/PDT performance under single-wavelength near-infrared (808 nm) light irradiation in a hydrophilic environment. The photothermal conversion efficiency (η) was counted as ∼81.3%, and the singlet oxygen (¹O₂) quantum yield (Φ) was compared with indocyanine green (ICG) as ∼0.0041. Furthermore, Fe₅₀-Zn-NC₉₀₀ is provided with a clear ability for generating ¹O₂ in living tumor cells and inducted massive necrosis/apoptosis of tumor cells with single-wavelength near-infrared laser irradiation. All of these are clear to consider that Fe₅₀-Zn-NC₉₀₀ displays great potential as an excellent photosensitizer for single-wavelength dual-mode PTT/PDT therapy.

Nanoscale Adsorption, Assembly, and Deionization Dynamics Recorded by Optical Fiber Sensors

Capacitive deionization in environmental decontamination has been widely studied and now requires intensive development to support large-scale deployment. Porous nanomaterials have been demonstrated to play pivotal roles in determining decontamination efficiency and manipulating nanomaterials to form functional architecture has been one of the most exciting challenges. Such nanostructure engineering and environmental applications highlight the importance of observing, recording, and studying basically electrical-assisted charge/ion/particle adsorption and assembly behaviors localized at charged interfaces. In addition, it is generally desirable to increase the sorption capacity and reduce the energy cost, which increase the requirement for recording collective dynamic and performance properties that stem from nanoscale deionization dynamics. Herein, we show how a single optical fiber can serve as an in situ and multifunctional opto-electrochemical platform for addressing these issues. The surface plasmon resonance signals allow the in situ spectral observation of nanoscale dynamic behaviors at the electrode-electrolyte interface. The parallel and complementary optical-electrical sensing signals enable the single probe but multifunctional recording of electrokinetic phenomena and electrosorption processes. As a proof of concept, we experimentally decipher the interfacial adsorption and assembly behaviors of anisotropic metal-organic framework nanoparticles at a charged surface and decouple the interfacial capacitive deionization within an assembled metal-organic framework nanocoating by visualizing its dynamic and energy consumption properties, including the adsorptive capacity, removal efficiency, kinetic properties, charge, specific energy consumption, and charge efficiency. This simple "all-in-fiber" opto-electrochemical platform offers intriguing opportunities to provide in situ and multidimensional insights into interfacial adsorption, assembly, and deionization dynamics information, which may contribute to understanding the underlying assembly rules and the exploring structure-deionization performance correlations for the development of tailor-made nanohybrid electrode coatings for deionization applications.

Lithiophilic Magnetic Host Facilitates Target-Deposited Lithium for Practical Lithium-Metal Batteries

Lithium-metal shows promising prospects in constructing various high-energy-density lithium-metal batteries (LMBs) while long-lasting tricky issues including the uncontrolled dendritic lithium growth and infinite lithium volume expansion seriously impede the application of LMBs. In this work, it is originally found that a unique lithiophilic magnetic host matrix (Co₃ O₄ -CCNFs) can simultaneously eliminate the uncontrolled dendritic lithium growth and huge lithium volume expansion that commonly occur in typical LMBs. The magnetic Co₃ O₄ nanocrystals which inherently embed on the host matrix act as nucleation sites and can also induce micromagnetic field and facilitate a targeted and ordered lithium deposition behavior thus, eliminating the formation of dendritic Li. Meanwhile, the conductive host can effectively homogenize the current distribution and Li-ion flux, thus, further relieving the volume expansion during cycling. Benefiting from this, the featured electrodes demonstrate ultra-high coulombic efficiency of 99.1% under 1 mA cm^-2 and 1 mAh cm^-2 . Symmetric cell under limited Li (10 mAh cm^-2 ) inspiringly delivers ultralong cycle life of 1600 h (under 2 mA cm^-2 , 1 mAh cm^-2 ). Moreover, LiFePO₄ ||Co₃ O₄ -CCNFs@Li full-cell under practical condition of limited negative/positive capacity ratio (2.3:1) can deliver remarkably improved cycling stability (with 86.6% capacity retention over 440 cycles).

Flexible cobalt nanoparticles/carbon nanofibers with macroporous structures toward superior electromagnetic wave absorption

The increasing electromagnetic (EM) pollution that has seriously threatened human health and electronic devices urgently required high-performance absorbents toward attenuating EM wave (EMW). The combination of microstructure modulation and appropriate components regulation has proven to be a feasible strategy for improving the EMW absorption performance of absorbents. In this work, well-designed one-dimensional carbon nanofibers with macroporous structures and uniformly magnetic metal nanoparticles modification were prepared by the hard-template assisted electrospinning method followed by carbonization and template-elimination processes. The strong interfacial polarization loss and multireflection strengthened by the hollow structures and the magnetic loss induced by the introduced cobalt nanoparticles evidently enhanced the impedance matching level of the macroporous carbon nanofibers/cobalt nanoparticles (MCF/Co). As a result, MCF/Co composite offers broad absorption bandwidth (6.24 GHz) and strong electromagnetic wave absorption performance (-40.1 dB) at a thickness of 3.0 mm. This work inspires the rational one-dimensional macroporous carbon nanofibers design for new-generation EMW materials and provides an important research basis for the porous flexible EMW absorption materials.

Reversible Growth of Halide Perovskites via Lead Oxide Hydroxide Nitrates Anchored Zeolitic Imidazolate Frameworks for Information Encryption and Decryption

The low formation energies of metal halide perovskites endow them with potential luminescent materials for applications in information encryption and decryption. However, reversible encryption and decryption are greatly hindered by the difficulty in robustly integrating perovskite ingredients into carrier materials. Here, we report an effective strategy to realize information encryption and decryption by reversible synthesis of halide perovskites, on the lead oxide hydroxide nitrates (Pb₁₃O₈(OH)₆(NO₃)₄) anchored zeolitic imidazolate framework composites. Benefiting from the superior stability of ZIF-8 in combination with the strong bond between Pb and N evidenced by X-ray absorption spectroscopy and X-ray photoelectron spectroscopy, the as-prepared Pb₁₃O₈(OH)₆(NO₃)₄-ZIF-8 nanocomposites (Pb-ZIF-8) can withstand common polar solvent attack. Taking advantage of blade-coating and laser etching, the Pb-ZIF-8 confidential films can be readily encrypted and subsequently decrypted through reaction with halide ammonium salt. Consequently, multiple cycles of encryption and decryption are realized by quenching and recovery of the luminescent MAPbBr₃-ZIF-8 films with polar solvents vapor and MABr reaction, respectively. These results provide a viable approach to integrate the state-of-the-art materials perovskites and ZIF for applications in information encryption and decryption films with large scale (up to 6 × 6 cm²), flexibility, and high resolution (approximate 5 μm line width).

New Insights into the Surfactant-Assisted Liquid-Phase Exfoliation of Bi2S3 for Electrocatalytic Applications

During water electrolysis, adding an electrocatalyst for the hydrogen evolution reaction (HER) is necessary to reduce the activation barrier and thus enhance the reaction rate. Metal chalcogenide-based 2D nanomaterials have been studied as an alternative to noble metal electrocatalysts because of their interesting electrocatalytic properties and low costs of production. However, the difficulty in improving the catalytic efficiency and industrializing the synthetic methods have become a problem in the potential application of these species in electrocatalysis. Liquid-phase exfoliation (LPE) is a low-cost and scalable technique for lab- and industrial-scale synthesis of 2D-material colloidal inks. In this work, we present, to the best of our knowledge, for the first time a systematic study on the surfactant-assisted LPE of bulk Bi2S3 crystalline powder to produce nanosheets (NSs). Different dispersing agents and LPE conditions have been tested in order to obtain colloidal low-dimensional Bi2S3 NSs in H2O at optimized concentrations. Eventually, colloidally stable layered nano-sized Bi2S3 suspensions can be produced with yields of up to ~12.5%. The thus obtained low-dimensional Bi2S3 is proven to be more active for HER than the bulk starting material, showing an overpotential of only 235 mV and an optimized Tafel slope of 125 mV/dec. Our results provide a facile top-down method to produce nano-sized Bi2S3 through a green approach and demonstrate that this material can have a good potential as electrocatalyst for HER.

Rationally Designed Manganese-Based Metal-Organic Frameworks as Altruistic Metal Oxide Precursors for Noble Metal-Free Oxygen Reduction Reaction

The sluggish oxygen reduction reaction (ORR) at the cathode is challenging and hinders the growth of hydrogen fuel cells. Concerning kinetic values, platinum is the best known catalyst for ORR; however, its less abundance, high cost, and corrosive nature warrant the development of low-cost catalysts. We report the hydrothermal synthesis of two novel Mn-based metal-organic frameworks (MOFs), [Mn₂(DOT)(H₂O)₂]_n (Mn-SKU-1) and [Mn₂(DOT)₂(BPY)₂(THF)]_n (Mn-SKU-2) (DOT = 2,5-dihydroxyterephthalate; BPY = 4,4'-bipyridine). Mn-SKU-1 contains dimeric Mn(II) centers where the two corner-shared MnO₆ octahedra fuse to give rise to an infinite Mn₂O₁₀ cluster, whereas the two Mn(II) ions coordinate to DOT and BPY moieties to give rise to a pillared structure in Mn-SKU-2 and form a 3D → 3D homo-interpenetration MOF with a twofold interpenetrated net. The pyrolysis of as-synthesized Mn-MOFs at 600 °C under N₂ produced exclusively porous α-Mn₂O₃ composites (PSKU-1 and PSKU-2), with the BET surface area of 90.8 (for PSKU-1) and 179.3 m² g^-1 (for PSKU-2). These mesoporous MOF-derived α-Mn₂O₃ composites were modified as cathode materials for the electrocatalytic reduction of oxygen. The onset potential for the oxygen reduction reaction was found to be 0.90 V for PSKU-1 and 0.93 V for PSKU-2 versus RHE in 0.1 M KOH solution, with the current density of 4.8 and 6.0 mA cm^-2, respectively, at 1600 rpm. Based on the RDE/RRDE results, the electrocatalytic oxygen reduction occurs majorly via the four-electron process. The electrocatalyst PSKU-2 is cheap, easy to use, retains 90% of its activity after 10 h of continuous use, and offers higher recyclability than Pt/C. The onset potential maximum current density and kinetic values (J_k = 11.68 mA cm^-2 and Tafel slope = 85.0 mV dec^-1) obtained in this work are higher than the values reported for pure Mn₂O₃.

Achieving near-Pt hydrogen production on defect nanocarbon via the synergy between carbon defects and heteroatoms

The effect of the synergy between vacancy defects and a phosphorus dopant on the hydrogen evolution reaction (HER) of nanocarbon was revealed for the first time both experimentally and theoretically, and the as-prepared catalysts show near-Pt HER activities, which are the best among metal-free catalysts.

MOF-Derived CoNi Nanoalloy Particles Encapsulated in Nitrogen-Doped Carbon as Superdurable Bifunctional Oxygen Electrocatalyst

Carbon-encapsulated transition metal catalysts have caught the interest of researchers in the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) due to their distinctive architectures and highly tunable electronic structures. In this work, we synthesized N-doped carbon encapsulated with CoNi nanoalloy particles (CoNi@NC) as the electrocatalysts. The metal-organic skeleton ZIF-67 nanocubes were first synthesized, and then Ni²⁺ ions were inserted to generate CoNi-ZIF precursors by a simple ion-exchange route, which was followed by pyrolysis and with urea for the introduction of nitrogen (N) at a low temperature to synthesize CoNi@NC composites. The results reveal that ZIF-67 pyrolysis can dope more N atoms in the carbon skeleton and that the pyrolysis temperature influences the ORR and OER performances. The sample prepared by CoNi@NC pyrolysis at 650 °C has a high N content (9.70%) and a large specific surface area (167 m² g^-1), with a positive ORR onset potential (Eonset) of 0.89 V vs. RHE and half-wave potential (E_1/2) of 0.81 V vs. RHE in 0.1 M KOH, and the overpotential of the OER measured in 1 M KOH was only 286 mV at 10 mA cm^-2. The highly efficient bifunctional ORR/OER electrocatalysts synthesized by this method can offer some insights into the design and synthesis of complex metal-organic frameworks (MOFs) hybrid structures and their derivatives as functional materials in energy storage.

Toward More Efficient Carbon-Based Electrocatalysts for Hydrogen Peroxide Synthesis: Roles of Cobalt and Carbon Defects in Two-Electron ORR Catalysis

Electrochemical production of H₂O₂ is a cost-effective and environmentally friendly alternative to the anthraquinone-based processes. Metal-doped carbon-based catalysts are commonly used for 2-electron oxygen reduction reaction (2e^-ORR) due to their high selectivity. However, the exact roles of metals and carbon defects on ORR catalysts for H₂O₂ production remain unclear. Herein, by varying the Co loading in the pyrolysis precursor, a Co-N/O-C catalyst with Faradaic efficiency greater than 90% in alkaline electrolyte was obtained. Detailed studies revealed that the active sites in the Co-N/O-C catalysts for 2e^-ORR were carbon atoms in C-O-C groups at defect sites. The direct contribution of cobalt single atom sites and metallic Co for the 2e^-ORR performance was negligible. However, Co plays an important role in the pyrolytic synthesis of a catalyst by catalyzing carbon graphitization, tuning the formation of defects and oxygen functional groups, and controlling O and N concentrations, thereby indirectly enhancing 2e^-ORR performance.

Wedged DNA Walker Coupled with a Bimetallic Metal-Organic Framework Electrocatalyst for Rapid and Sensitive Monitoring of DNA Methylation

The dissociation of the walking strand from the track gives rise to decreased efficiency and long reaction time of DNA walkers. In this work, we constructed a DNA walker combining the introduction of a wedge segment with a bimetallic metal-organic framework (MOF) electrocatalyst to solve this problem. The target methylated DNA acted as a single-legged walker, and the immobilization probe assembled on the track contained a wedge segment that was complementary to the target methylated DNA persistently, inhibiting its dissociation from the track. The fuel strand modified with a bimetallic MOF would drive the target strand to conduct branch migration and move processively along the track. The stepwise movement of the target strand resulted in the loading of numerous bimetallic MOF catalysts to reduce H₂O₂ at the electrode interface, thereby a significantly increased current response would be obtained for the detection of methylated DNA. This DNA walker achieved a detection limit of 200 aM within 20 min and effectively distinguished DNA with different methylation statuses, which would pave a way for rapid and sensitive monitoring of DNA methylation.

Three-dimensional hierarchical flower-like bimetallic–organic materials in situ grown on carbon cloth and doped with sulfur as an air cathode in a microbial fuel cell

Herein, the output power density produced by Zn/Co-S-3DHFLM as the cathode catalyst of an MFC was higher than that of Co-3DHFLM.

Potential Application of Discarded Natural Coal Gangue for the Removal of Tetracycline Hydrochloride (TC) from an Aqueous Solution

The generation and accumulation of discarded coal gangue (CG) have severe environmental impacts. CG can adsorb other pollutants in the aquatic environment. However, previous studies have not assessed whether CG can adsorb the emerging contaminant tetracycline hydrochloride (TC). Here, discarded CG taken from a mine was pretreated by crushing, cleaning, and sieving and subsequently applied to the adsorption of TC. The adsorption studies were carried out by batch equilibrium adsorption experiments. Our findings indicated that the adsorption behavior could be accurately described using the quasi-first order kinetic and Langmuir adsorption isotherm models, indicating that monolayer adsorption was the main mechanism mediating the interaction between CG and TC. The adsorption process was classified as a thermodynamic endothermic and spontaneous reaction, which was controlled by chemical and physical adsorption, including electrostatic interaction and cation exchange. The pH of the solution had a great influence on the TC adsorption capacity of GC, with higher adsorption occurring in acidic environments compared to alkaline environments. This was attributed to the changes in CG Zeta potential and TC pKa at different pH conditions. Collectively, our findings demonstrated the potential applicability of discarded CG for the adsorption of TC and provided insights into the adsorption mechanisms.