Advances in the Application of Silicon and Germanium Nanowires for High-Performance Lithium-Ion Batteries

Unveiling Potential of Gallium Ferrite (GaFeO3) as an Anode Material for Lithium-Ion Batteries

Lithium-ion batteries (LIBs) serve as the backbone of modern technologies with ongoing efforts to enhance their performance and sustainability driving the exploration of new electrode materials. This study introduces a new type of alloy-conversion-based gallium ferrite (GFO: GaFeO3) as a potential anode material for Li-ion battery applications. The GFO was synthesized by a one-step mechanochemistry-assisted solid-state method. The powder X-ray diffraction analysis confirms the presence of an orthorhombic phase with the Pc21 n space group. The photoelectron spectroscopy studies reveal the presence of Ga3+ and Fe3+ oxidation states of gallium and iron atoms in the GFO structure. The GFO was evaluated as an anode material for Li-ion battery applications, displaying a high discharge capacity of ∼887 mA h g-1 and retaining a stable capacity of ∼200 mA h g-1 over 450 cycles, with a Coulombic efficiency of 99.6 % at a current density of 100 mA g-1. Cyclic voltammetry studies confirm an alloy-conversion-based reaction mechanism in the GFO anode. Furthermore, density functional theory studies reveal the reaction mechanism during cycling and Li-ion diffusion pathways in the GFO anode. These results strongly suggest that the GFO could be an alternative anode material in LIBs.

Si Nanowires: From Model System to Practical Li-Ion Anode Material and Beyond

Nanowire (NW)-based anodes for Li-ion batteries (LIBs) have been under investigation for more than a decade, with their unique one-dimensional (1D) morphologies and ability to transform into interconnected active material networks offering potential for enhanced cycling stability with high capacity. This is particularly true for silicon (Si)-based anodes, where issues related to large volumetric expansion can be partially mitigated and the cycle life can be enhanced. In this Perspective, we highlight the trajectory of Si NWs from a model system to practical Li-ion battery anode material and future prospects for extension to beyond Li-ion batteries. The study examines key research areas related to Si NW-based anodes, including state-of-the-art (SoA) characterization approaches followed by practical anode design considerations, including NW composite anode formation and upscaling/full-cell considerations. An outlook on the practical prospects of NW-based anodes and some future directions for study are detailed.

Rational electrolyte design and electrode regulation for boosting high-capacity Zn-iodine fiber-shaped batteries with four-electron redox reactions

Aqueous Zn ion-based fiber-shaped batteries (AZFBs) with the merits of high flexibility and safety have received much attention for powering wearable electronic devices. However, the relatively low specific capacity provided by cathode materials limits their practical application. Herein, we first propose a simple strategy for fabricating high-capacity Zn-iodine fiber-shaped batteries with a high concentration electrolyte and a reduced graphene oxide fiber (GF) cathode. It was found that oxygen functional groups in the graphene sheet demonstrate strong interaction with polyiodides but hinder electron conductivity; thus, the optimal balance between the specific capacity and coulombic efficiency of the GF electrode can be a function of the surface properties at different hydrothermal temperatures. Besides, the regulated high concentration electrolyte effectively suppresses the diffusion of polyiodides, which is attributed to the constrained freedom of water. More importantly, a four-electron redox mechanism was experimentally revealed through in situ Raman spectra. As a result, this fiber-shaped battery delivers a superior high reversible capacity of 390 mA h cm-3 at 1 A cm-3, an excellent rate performance of 125.7 mA h cm-3 at a high current density of 8 A cm-3 and outstanding cycling life with 82% capacitance retention after 2500 cycles.

Revealing Seed-Mediated Structural Evolution of Copper-Silicide Nanostructures: Generating Structured Current Collectors for Rechargeable Batteries

Metal silicide thin films and nanostructures typically employed in electronics have recently gained significant attention in battery technology, where they are used as active or inactive materials. However, unlike thin films, the science behind the evolution of silicide nanostructures, especially 1D nanowires (NWs), is a key missing aspect. Cux Siy nanostructures synthesized by solvent vapor growth technique are studied as a model system to gain insights into metal silicide formation. The temperature-dependent phase evolution of Cux Siy structures proceeds from Cu>Cu0.83 Si0.17 >Cu5 Si>Cu15 Si4 . The role of Cu diffusion kinetics on the morphological progression of Cu silicides is studied, revealing that the growth of 1D metal silicide NWs proceeds through an in situ formed, Cu seed-mediated, self-catalytic process. The different Cux Siy morphologies synthesized are utilized as structured current collectors for K-ion battery anodes. Sb deposited by thermal evaporation upon Cu15 Si4 tripod NWs and cube architectures exhibit reversible alloying capacities of 477.3 and 477.6 mAh g-1 at a C/5 rate. Furthermore, Sb deposited Cu15 Si4 tripod NWs anode tested in Li-ion and Na-ion batteries demonstrate reversible capacities of ≈518 and 495 mAh g-1 .

Robust bond linkage between boron-based coating layer and lithium polyacrylic acid binder enables ultra-stable micro-sized germanium anodes

Micro-sized alloy type germanium (Ge) anodes possess appealing properties for next-generation lithium ions batteries, such as desirable capacity, easy accessibility and greater tapdensity. Nevertheless, volume expansion accompanied by severe pulverization and continuous growth of solid electrolyte interlayer (SEI) still represent fundamental obstacles to their practical applications. Herein, we propose a fresh strategy of constructing robust bond linkage between boron-based coating layer and lithiated polyacrylic acid (PAALi) binder to circumvent the pulverization problems of Ge anodes. Facile pyrolysis of boric acid can introduce an amorphous boron oxide interphase on Ge microparticles (noted as Ge@B2O3). Then in situ crosslinking reaction between B2O3 and PAALi via BOC bond linkage constructs a robust Ge anode (Ge@B-PAALi), which is proved by FTIR and Raman characterizations. Post morphological and compositional investigations reveal the minimized pulverization and a thinner SEI composition. The robust bond linkage strategy endows Ge anode with ultra-stable cycling properties of 1053.8 mAh/g after 500 cycles at 1 A/g vs. 500.7 mAh/g for Ge@PAALi and 372.7 mAh/g for Ge@B2O3, respectively. The proposed bond linkage strategy via artificial coating layer and functional binders unlocks huge potential of alloys and other anodes for next-generation battery applications.

First-Principles Dynamics Investigation of Germanium as an Anode Material in Multivalent-Ion Batteries

Germanium, a promising electrode material for high-capacity lithium ion batteries (LIBs) anodes, attracted much attention because of its large capacity and remarkably fast charge/discharge kinetics. Multivalent-ion batteries are of interest as potential alternatives to LIBs because they have a higher energy density and are less prone to safety hazards. In this study, we probed the potential of amorphous Ge anodes for use in multivalent-ion batteries. Although alloying Al and Zn in Ge anodes is thermodynamically unstable, Mg and Ca alloys with Ge form stable compounds, Mg2.3Ge and Ca2.4Ge that exhibit higher capacities than those obtained by alloying Li, Na, or K with Ge, corresponding to 1697 and 1771 mA·h·g-1, respectively. Despite having a slightly lower capacity than Ca-Ge, Mg-Ge shows an approximately 150% smaller volume expansion ratio (231% vs. 389%) and three orders of magnitude higher ion diffusivity (3.0 × 10-8 vs. 1.1 × 10-11 cm2 s-1) than Ca-Ge. Furthermore, ion diffusion in Mg-Ge occurs at a rate comparable to that of monovalent ions, such as Li+, Na+, and K+. The outstanding performance of the Mg-Ge system may originate from the coordination number of the Ge host atoms and the smaller atomic size of Mg. Therefore, Ge anodes could be applied in multivalent-ion batteries using Mg2+ as the carrier ion because its properties can compete with or surpass monovalent ions. Here, we report that the maximum capacity, volume expansion ratio, and ion diffusivities of the alloying electrode materials can be understood using atomic-scale structural properties, such as the host-host and host-ion coordination numbers, as valuable indicators.

Revealing Capacity Degradation of Ge Anodes in Lithium-Ion Batteries Triggered by Interfacial LiH

The Germanium (Ge), as a fast-charging and high specific capacity (1568 mAh g-1 ) alloy anode, is greatly hampered in practical application by poor cyclability. To date, the understanding of cycling performance degradation remains elusive. This study illustrates that, contrary to conventional beliefs, most of the Ge material in failed anodes still retains good integrity and does not undergo severe pulverization. It is revealed that capacity degradation is clearly correlated to the interfacial evolution of lithium hydride (LiH). Tetralithium germanium hydride (Li4 Ge2 H), as a new species derived from LiH, is identified as the culprit of Ge anode degradation, which is the dominant crystalized component in an ever-growing and ever-insulating interphase. The significantly increased thickness of the solid electrolyte interface (SEI) is accompanied by the accumulation of insulating Li4 Ge2 H upon cycling, which severely retards the charge transport process and ultimately triggers the anode failure. We believe that the comprehensive understanding of the failure mechanism presented in this study is of great significance to promoting the design and development of alloy anode for the next generation of lithium-ion batteries.

Encapsulation of Silicon Nano Powders via Electrospinning as Lithium Ion Battery Anode Materials

Silicon-containing polyester from tetramethoxysilane, ethylene glycol, and o-Phthalic anhydride were used as encapsulating materials for silicon nano powders (SiNP) via electrospinning, with Polyacrylonitrile (PAN) as spinning additives. In the correct quantities, SiNP could be well encapsulated in nano fibers (200-400 nm) using scanning electron microscopy (SEM). The encapsulating materials were then carbonized to a Si-O-C material at 755 °C (Si@C-SiNF-5 and Si@C-SiNF-10, with different SiNP content). Fiber structure and SiNP crystalline structure were reserved even after high-temperature treatment, as SEM and X-ray diffraction (XRD) verified. When used as lithium ion battery (LIB) anode materials, the cycling stability of SiNPs increased after encapsulation. The capacity of SiNPs decreased to ~10 mAh/g within 30 cycles, while those from Si@C-SiNF-5 and Si@C-SiNF-10 remained over 500 mAh/g at the 30th cycle. We also found that adequate SiNP content is necessary for good encapsulation and better cycling stability. In the anode from Si@C-SiNF-10 in which SiNPs were not well encapsulated, fibers were broken and pulverized as SEM confirmed; thus, its cycling stability is poorer than that from Si@C-SiNF-5.

Monitoring state of charge and volume expansion in lithium-ion batteries: an approach using surface mounted thin-film graphene sensors

Accurate monitoring of battery cell state of charge (SoC) and state of health (SoH) is vital to the safe and effective operation of rechargeable battery systems such as those in electric vehicles yet remains a challenge while the system is in use. A new surface-mounted sensor enabling simple and rapid monitoring of lithium-ion battery cell SoC and SoH is demonstrated. Small changes in cell volume brought about by the expansion and contraction of electrode materials during charge and discharge are detected through monitoring the changes in electrical resistance of a graphene film in the sensor. The relationship between sensor resistance and cell SoC/voltage was extracted, enabling rapid SoC determination without interruption to cell operation. The sensor was also capable of detecting early indications of irreversible cell expansion due to common cell failure modes, enabling mitigating steps to be taken to avoid catastrophic cell failure.

Revealing An Intercalation-Conversion-Heterogeneity Hybrid Lithium-Ion Storage Mechanism in Transition Metal Nitrides Electrodes with Jointly Fast Charging Capability and High Energy Output

The performance of electrode materials depends intensively on the lithium (Li)-ion storage mechanisms correlating ultimately with the Coulombic efficiency, reversible capacity, and morphology variation of electrode material upon cycling. Transition metal nitrides anode materials have exhibited high-energy density and superior rate capability; however, the intrinsic mechanism is largely unexplored and still unclear. Here, a typical 3D porous Fe2 N micro-coral anode is prepared and, an intercalation-conversion-heterogeneity hybrid Li-ion storage mechanism that is beyond the conventional intercalation or conversion reaction is revealed through various characterization techniques and thermodynamic analysis. Interestingly, using advanced in situ magnetometry, the ratio (ca. 24.4%) of the part where conversion reaction occurs to the entire Fe2 N can further be quantified. By rationally constructing a Li-ion capacitor comprising 3D porous Fe2 N micro-corals anode and commercial AC cathode, the hybrid full device delivers a high energy-density (157 Wh kg-1 ) and high power-density (20 000 W kg-1 ), as well as outstanding cycling stability (93.5% capacitance retention after 5000 cycles). This research provides an original and insightful method to confirm the reaction mechanism of material related to transition metals and a fundamental basis for emerging fast charging electrode materials to be efficiently explored for a next-generation battery.

Effect of Silicate Additive on Structural and Electrical Properties of Germanium Nanowires Formed by Electrochemical Reduction from Aqueous Solutions

Layers of germanium (Ge) nanowires (NWs) on titanium foils were grown by metal-assisted electrochemical reduction of germanium oxide in aqueous electrolytes based on germanium oxide without and with addition of sodium silicate. Structural properties and composition of Ge NWs were studied by means of the scanning and transmission electron microscopy, X-ray photoelectron spectroscopy, X-ray diffraction, and Raman spectroscopy. When sodium silicate was added to the electrolyte, Ge NWs consisted of 1-2 at.% of silicon (Si) and exhibited smaller mean diameter and improved crystallinity. Additionally, samples of Ge NW films were prepared by ultrasonic removal of Ge NWs from titanium foils followed with redeposition on corundum substrates with platinum electrodes. The electrical conductivity of Ge NW films was studied at different temperatures from 25 to 300 °C and an effect of the silicon impurity on the thermally activated electrical conductivity was revealed. Furthermore, the electrical conductivity of Ge NW films on corundum substrates exhibited a strong sensor response on the presence of saturated vapors of different liquids (water, acetone, ethanol, and isopropanol) in air and the response was dependent on the presence of Si impurities in the nanowires. The results obtained indicate the possibility of controlling the structure and electrical properties of Ge NWs by introducing silicate additives during their formation, which is of interest for applications in printed electronics and molecular sensorics.

A Techno-Economic Model for Benchmarking the Production Cost of Lithium-Ion Battery Cells

In response to the increasing expansion of the electric vehicles (EVs) market and demand, billions of dollars are invested into the battery industry to increase the number and production volume of battery cell manufacturing plants across the world, evident in Giga-battery factories. On the other side, despite the increase in the battery cell raw material prices, the total production cost of battery cells requires reaching a specific value to grow cost-competitive with internal combustion vehicles. Further, obtaining a high-quality battery at the end of the production line requires integrating numerous complex processes. Thus, developing a cost model that simultaneously includes the physical and chemical characteristics of battery cells, commodities prices, process parameters, and economic aspects of a battery production plant is essential in identifying the cost-intensive areas of battery production. Moreover, such a model is helpful in finding the minimum efficient scale for the battery production plant which complies with the emergence of Giga-battery plants. In this regard, a process-based cost model (PBCM) is developed to investigate the final cost for producing ten state-of-the-art battery cell chemistries on large scales in nine locations. For a case study plant of 5.3 GWh.year−1 that produces prismatic NMC111-G battery cells, location can alter the total cost of battery cell production by approximately 47 US$/kWh, which is dominated by the labor cost. This difference could decrease by approximately 31% at the minimum efficient scale of the battery production plant, which is 7.8 GWh.year−1 for the case study in this work. Finally, a comprehensive sensitivity analysis is conducted to investigate the final prices of battery cell chemistries due to the changes in commodities prices, economic factors of the plant, battery cell production parameters, and production volume. The outcomes of this work can support policy designers and battery industry leaders in managing production technology and location.

A controlled nucleation and growth of Si nanowires by using a TiN diffusion barrier layer for lithium-ion batteries

Uniform size of Si nanowires (NWs) is highly desirable to enhance the performance of Si NW-based lithium-ion batteries. To achieve a narrow size distribution of Si NWs, the formation of bulk-like Si structures such as islands and chunks needs to be inhibited during nucleation and growth of Si NWs. We developed a simple approach to control the nucleation of Si NWs via interfacial energy tuning between metal catalysts and substrates by introducing a conductive diffusion barrier. Owing to the high interfacial energy between Au and TiN, agglomeration of Au nanoparticle catalysts was restrained on a TiN layer which induced the formation of small Au nanoparticle catalysts on TiN-coated substrates. The resulting Au catalysts led to the nucleation and growth of Si NWs on the TiN layer with higher number density and direct integration of the Si NWs onto current collectors without the formation of bulk-like Si structures. The lithium-ion battery anodes based on Si NWs grown on TiN-coated current collectors showed improved specific gravimetric capacities (>30%) for various charging rates and enhanced capacity retention up to 500 cycles of charging-discharging.

One-Step Grown Carbonaceous Germanium Nanowires and Their Application as Highly Efficient Lithium-Ion Battery Anodes

Developing a simple, cheap, and scalable synthetic method for the fabrication of functional nanomaterials is crucial. Carbon-based nanowire nanocomposites could play a key role in integrating group IV semiconducting nanomaterials as anodes into Li-ion batteries. Here, we report a very simple, one-pot solvothermal-like growth of carbonaceous germanium (C-Ge) nanowires in a supercritical solvent. C-Ge nanowires are grown just by heating (380-490 °C) a commercially sourced Ge precursor, diphenylgermane (DPG), in supercritical toluene, without any external catalysts or surfactants. The self-seeded nanowires are highly crystalline and very thin, with an average diameter between 11 and 19 nm. The amorphous carbonaceous layer coating on Ge nanowires is formed from the polymerization and condensation of light carbon compounds generated from the decomposition of DPG during the growth process. These carbonaceous Ge nanowires demonstrate impressive electrochemical performance as an anode material for Li-ion batteries with high specific charge values (>1200 mAh g^-1 after 500 cycles), greater than most of the previously reported for other "binder-free" Ge nanowire anode materials, and exceptionally stable capacity retention. The high specific charge values and impressively stable capacity are due to the unique morphology and composition of the nanowires.

Nitrogen, Oxygen-Codoped Vertical Graphene Arrays Coated 3D Flexible Carbon Nanofibers with High Silicon Content as an Ultrastable Anode for Superior Lithium Storage

Free-standing and foldable electrodes with high energy density and long lifespan have recently elicited attention on the development of lithium-ion batteries (LIBs) for flexible electronic devices. However, both low energy density and slow kinetics in cycling impede their practical applications. In this work, a free-standing and binder-free N, O-codoped 3D vertical graphene carbon nanofibers electrode with ultra-high silicon content (VGAs@Si@CNFs) is developed via electrospinning, subsequent thermal treatment, and chemical vapor deposition processes. The as-prepared VGAs@Si@CNFs electrode exhibits excellent conductivity and flexibility because of the high graphitized carbon nanofiber network and abundant vertical graphene arrays. Such 3D all-carbon architecture can be fabulous for providing a conductive and mechanically robust network, further improving the kinetics and restraining the volume expansion of Si NPs, especially with an ultra-high Si content (>90 wt%). As a result, the VGAs@Si@CNFs composite demonstrates a superior specific capacity (3619.5 mAh g-1 at 0.05 A g-1 ), ultralong lifespan, and outstanding rate capability (1093.1 mAh g-1 after 1500 cycles at 8 A g-1 ) as a free-standing anode for LIBs. It is believed that this work offers an exciting method for developing free-standing and high-energy-density electrodes for other energy storage devices.

Dense Silicon Nanowire Networks Grown on a Stainless-Steel Fiber Cloth: A Flexible and Robust Anode for Lithium-Ion Batteries

Silicon nanowires (Si NWs) are a promising anode material for lithium-ion batteries (LIBs) due to their high specific capacity. Achieving adequate mass loadings for binder-free Si NWs is restricted by low surface area, mechanically unstable and poorly conductive current collectors (CCs), as well as complicated/expensive fabrication routes. Herein, a tunable mass loading and dense Si NW growth on a conductive, flexible, fire-resistant, and mechanically robust interwoven stainless-steel fiber cloth (SSFC) using a simple glassware setup is reported. The SSFC CC facilitates dense growth of Si NWs where its open structure allows a buffer space for expansion/contraction during Li-cycling. The Si NWs@SSFC anode displays a stable performance for 500 cycles with an average Coulombic efficiency of >99.5%. Galvanostatic cycling of the Si NWs@SSFC anode with a mass loading of 1.32 mg cm-2 achieves a stable areal capacity of ≈2 mAh cm-2 at 0.2 C after 200 cycles. Si NWs@SSFC anodes with different mass loadings are characterized before and after cycling by scanning and transmission electron microscopy to examine the effects of Li-cycling on the morphology. Notably, this approach allows the large-scale fabrication of robust and flexible binder-free Si NWs@SSFC architectures, making it viable for practical applications in high energy density LIBs.

Nanowelding in Whole-Lifetime Bottom-Up Manufacturing: From Assembly to Service

The continuous miniaturization of microelectronics is pushing the transformation of nanomanufacturing modes from top-down to bottom-up. Bottom-up manufacturing is essentially the way of assembling nanostructures from atoms, clusters, quantum dots, etc. The assembly process relies on nanowelding which also existed in the synthesis process of nanostructures, construction and repair of nanonetworks, interconnects, integrated circuits, and nanodevices. First, many kinds of novel nanomaterials and nanostructures from 0D to 1D, and even 2D are synthesized by nanowelding. Second, the connection of nanostructures and interfaces between metal/semiconductor-metal/semiconductor is realized through low-temperature heat-assisted nanowelding, mechanical-assisted nanowelding, or cold welding. Finally, 2D and 3D interconnects, flexible transparent electrodes, integrated circuits, and nanodevices are constructed, functioned, or self-healed by nanowelding. All of the three nanomanufacturing stages follow the rule of "oriented attachment" mechanisms. Thus, the whole-lifetime bottom-up manufacturing process from the synthesis and connection of nanostructures to the construction and service of nanodevices can be organically integrated by nanowelding. The authors hope this review can bring some new perspective in future semiconductor industrialization development in the expansion of multi-material systems, technology pathway for the refined design, controlled synthesis and in situ characterization of complex nanostructures, and the strategies to develop and repair novel nanodevices in service.

Commercialization-Driven Electrodes Design for Lithium Batteries: Basic Guidance, Opportunities, and Perspectives

Current lithium-ion battery technology is approaching the theoretical energy density limitation, which is challenged by the increasing requirements of ever-growing energy storage market of electric vehicles, hybrid electric vehicles, and portable electronic devices. Although great progresses are made on tailoring the electrode materials from methodology to mechanism to meet the practical demands, sluggish mass transport, and charge transfer dynamics are the main bottlenecks when increasing the areal/volumetric loading multiple times to commercial level. Thus, this review presents the state-of-the-art developments on rational design of the commercialization-driven electrodes for lithium batteries. First, the basic guidance and challenges (such as electrode mechanical instability, sluggish charge diffusion, deteriorated performance, and safety concerns) on constructing the industry-required high mass loading electrodes toward commercialization are discussed. Second, the corresponding design strategies on cathode/anode electrode materials with high mass loading are proposed to overcome these challenges without compromising energy density and cycling durability, including electrode architecture, integrated configuration, interface engineering, mechanical compression, and Li metal protection. Finally, the future trends and perspectives on commercialization-driven electrodes are offered. These design principles and potential strategies are also promising to be applied in other energy storage and conversion systems, such as supercapacitors, and other metal-ion batteries.

Progressive growth of the solid-electrolyte interphase towards the Si anode interior causes capacity fading

The solid-electrolyte interphase (SEI), a layer formed on the electrode surface, is essential for electrochemical reactions in batteries and critically governs the battery stability. Active materials, especially those with extremely high energy density, such as silicon (Si), often inevitably undergo a large volume swing upon ion insertion and extraction, raising a critical question as to how the SEI interactively responds to and evolves with the material and consequently controls the cycling stability of the battery. Here, by integrating sensitive elemental tomography, an advanced algorithm and cryogenic scanning transmission electron microscopy, we unveil, in three dimensions, a correlated structural and chemical evolution of Si and SEI. Corroborated with a chemomechanical model, we demonstrate progressive electrolyte permeation and SEI growth along the percolation channel of the nanovoids due to vacancy injection and condensation during the delithiation process. Consequently, the Si-SEI spatial configuration evolves from the classic 'core-shell' structure in the first few cycles to a 'plum-pudding' structure following extended cycling, featuring the engulfing of Si domains by the SEI, which leads to the disruption of electron conduction pathways and formation of dead Si, contributing to capacity loss. The spatially coupled interactive evolution model of SEI and active materials, in principle, applies to a broad class of high-capacity electrode materials, leading to a critical insight for remedying the fading of high-capacity electrodes.

A Review of Self-Seeded Germanium Nanowires: Synthesis, Growth Mechanisms and Potential Applications

Ge nanowires are playing a big role in the development of new functional microelectronic modules, such as gate-all-around field-effect transistor devices, on-chip lasers and photodetectors. The widely used three-phase bottom-up growth method utilising a foreign catalyst metal or metalloid is by far the most popular for Ge nanowire growth. However, to fully utilise the potential of Ge nanowires, it is important to explore and understand alternative and functional growth paradigms such as self-seeded nanowire growth, where nanowire growth is usually directed by the in situ-formed catalysts of the growth material, i.e., Ge in this case. Additionally, it is important to understand how the self-seeded nanowires can benefit the device application of nanomaterials as the additional metal seeding can influence electron and phonon transport, and the electronic band structure in the nanomaterials. Here, we review recent advances in the growth and application of self-seeded Ge and Ge-based binary alloy (GeSn) nanowires. Different fabrication methods for growing self-seeded Ge nanowires are delineated and correlated with metal seeded growth. This review also highlights the requirement and advantage of self-seeded growth approach for Ge nanomaterials in the potential applications in energy storage and nanoelectronic devices.

A Nanowire Nest Structure Comprising Copper Silicide and Silicon Nanowires for Lithium-Ion Battery Anodes with High Areal Loading

High loading (>1.6 mg cm^-2 ) of Si nanowires (NWs) is achieved by seeding the growth from a dense array of Cu₁₅ Si₄ NWs using tin seeds. A one-pot synthetic approach involves the direct growth of CuSi NWs on Cu foil that acts as a textured surface for Sn adhesion and Si NW nucleation. The high achievable Si NW loading is enabled by the high surface area of CuSi NWs and bolstered by secondary growth of Si NWs as branches from both Si and CuSi NW stems, forming a dense Si active layer, interconnected with an electrically conducting CuSi array (denoted Si/CuSi). When employed as Li-ion battery anodes, the Si/CuSi nest structure demonstrates impressive rate performance, reaching 4.1 mAh cm^-2 at C/20, 3.1 mAh cm^-2 at C/5, and 0.8 mAh cm^-2 at 6C. Also, Si/CuSi shows remarkable long-term stability, delivering a stable areal capacity of 2.2 mAh cm^-2 after 300 cycles. Overall, complete anode fabrication is achieved within a single reaction by employing an inexpensive Sn powder approach.

Architectural Engineering Achieves High-Performance Alloying Anodes for Lithium and Sodium Ion Batteries

Tremendous efforts have been dedicated to the development of high-performance electrochemical energy storage devices. The development of lithium- and sodium-ion batteries (LIBs and SIBs) with high energy densities is urgently needed to meet the growing demands for portable electronic devices, electric vehicles, and large-scale smart grids. Anode materials with high theoretical capacities that are based on alloying storage mechanisms are at the forefront of research geared towards high-energy-density LIBs or SIBs. However, they often suffer from severe pulverization and rapid capacity decay due to their huge volume change upon cycling. So far, a wide variety of advanced materials and electrode structures are developed to improve the long-term cyclability of alloying-type materials. This review provides fundamentals of anti-pulverization and cutting-edge concepts that aim to achieve high-performance alloying anodes for LIBs/SIBs from the viewpoint of architectural engineering. The recent progress on the effective strategies of nanostructuring, incorporation of carbon, intermetallics design, and binder engineering is systematically summarized. After that, the relationship between architectural design and electrochemical performance as well as the related charge-storage mechanisms is discussed. Finally, challenges and perspectives of alloying-type anode materials for further development in LIB/SIB applications are proposed.

Green, Template-Less Synthesis of Honeycomb-like Porous Micron-Sized Red Phosphorus for High-Performance Lithium Storage

Large-volume-expansion-induced material pulverization severely limits the electrochemical performance of high-capacity red phosphorus (RP) in alkali-ion batteries. Honeycomb-like porous materials can effectively solve the issues due to their abundant interconnected pore structures. Nevertheless, it is difficult and greatly challenging to fabricate a honeycomb-like porous RP that has not yet been fabricated via chemical synthesis. Herein, we successfully fabricate a honeycomb-like porous micron-sized red phosphorus (HPRP) with a controlled pore structure via a large-scale green and template-less hydrothermal strategy. It is demonstrated that dissolved oxygen in the solution can accelerate the destruction of P9 cages of RP, thus forming abundant active defects with a faster reaction rate, so the fast corrosion forms the honeycomb-like porous structure. Owing to the free volume, interconnected porous structure, and strong robustness, the optimized HPRP-36 can mitigate drastic volume variation and prevent pulverization during cycling resulting in tiny particle-level outward expansion, demonstrated by in situ TEM and ex situ SEM analysis. Thus, the HPRP-36 anode delivers a large reversible capacity (2587.4 mAh g^-1 at 0.05 A g^-1) and long-cycling stability with over 500 cycles (∼81.9% capacity retention at 0.5 A g^-1) in lithium-ion batteries. This generally scalable, green strategy and deep insights provide a good entry point in designing honeycomb-like porous micron-sized materials for high-performance electrochemical energy storage and conversion.

Influence of Carbonate-Based Additives on the Electrochemical Performance of Si NW Anodes Cycled in an Ionic Liquid Electrolyte

Addition of electrolyte additives (ethylene or vinylene carbonate) is shown to dramatically improve the cycling stability and capacity retention (1600 mAh g^-1) of Si nanowires (NWs) in a safe ionic liquid (IL) electrolyte (0.1LiTFSI-0.6PYR₁₃FSI-0.3PYR₁₃TFSI). We show, using postmortem SEM and TEM, a distinct difference in morphologies of the active material after cycling in the presence or absence of the additives. The difference in performance is shown by postmortem XPS analysis to arise from a notable increase in irreversible silicate formation in the absence of the carbonate additives. The composition of the solid electrolyte interphase (SEI) formed at the active material surface was further analyzed using XPS as a function of the IL components revealing that the SEI was primarily made up of N-, F-, and S-containing compounds from the degradation of the TFSI and FSI anions.

Achieving Fast and Durable Lithium Storage through Amorphous FeP Nanoparticles Encapsulated in Ultrathin 3D P-Doped Porous Carbon Nanosheets

Conversion-type transition-metal phosphide anode materials with high theoretical capacity usually suffer from low-rate capability and severe capacity decay, which are mainly caused by their inferior electronic conductivities and large volumetric variations together with the poor reversibility of discharge product (Li₃P), impeding their practical applications. Herein, guided by density functional theory calculations, these obstacles are simultaneously mitigated by confining amorphous FeP nanoparticles into ultrathin 3D interconnected P-doped porous carbon nanosheets (denoted as FeP@CNs) via a facile approach, forming an intriguing 3D flake-CNs-like configuration. As an anode for lithium-ion batteries (LIBs), the resulting FeP@CNs electrode not only reaches a high reversible capacity (837 mA h g^-1 after 300 cycles at 0.2 A g^-1) and an exceptional rate capability (403 mA h g^-1 at 16 A g^-1) but also exhibits extraordinary durability (2500 cycles, 563 mA h g^-1 at 4 A g^-1, 98% capacity retention). By combining DFT calculations, in situ transmission electron microscopy, and a suite of ex situ microscopic and spectroscopic techniques, we show that the superior performances of FeP@CNs anode originate from its prominent structural and compositional merits, which render fast electron/ion-transport kinetics and abundant active sites (amorphous FeP nanoparticles and structural defects in P-doped CNs) for charge storage, promote the reversibility of conversion reactions, and buffer the volume variations while preventing pulverization/aggregation of FeP during cycling, thus enabling a high rate and highly durable lithium storage. Furthermore, a full cell composed of the prelithiated FeP@CNs anode and commercial LiFePO₄ cathode exhibits impressive rate performance while maintaining superior cycling stability. This work fundamentally and experimentally presents a facile and effective structural engineering strategy for markedly improving the performance of conversion-type anodes for advanced LIBs.

A novel 3D porous pseudographite/Si/Ni composite anode material fabricated by a facile method

A novel 3D porous pseudographite/Si/Ni (PG/Si/Ni) composite was prepared by a facile low-temperature calcination method using saturable starch and NiCl₂·6H₂O as precursors. The pseudographite matrix of PG/Si/Ni was obtained from the reaction between starch and NiCl₂·6H₂O during the calcination process. Compared to the C/Si electrode, the PG/Si/Ni electrode delivers a high reversible specific capacity of 659.66 mA h g^-1 at a current density of 1 A g^-1 even after 2000 cycles. In addition, the PG/Si/Ni electrode shows superior rate performance and still maintains a high specific capacity of 1324.01 mA h g^-1 when the cycle current density returns to 0.1 A g^-1. The porous pseudographite structure is able to improve Li⁺ diffusion efficiency, reduce pulverization and lead to the formation of stable SEI layers during the cycling process. Therefore, these results suggest that the 3D porous pseudographite/Si/Ni composite is a promising novel anode material. Besides, the low-temperature synthesis method of the pseudographite matrix can be applied for further modification of carbon-based Si anode materials.

Germanium tin alloy nanowires as anode materials for high performance Li-ion batteries

The combination of two active Li-ion materials (Ge and Sn) can result in improved conduction paths and higher capacity retention. Here we report for the first time, the implementation of Ge_1-x Sn _x alloy nanowires as anode materials for Li-ion batteries. Ge_1-x Sn _x alloy nanowires have been successfully grown via vapor-liquid-solid technique directly on stainless steel current collectors. Ge_1-x Sn _x (x = 0.048) nanowires were predominantly seeded from the Au_0.80Ag_0.20 catalysts with negligible amount of growth was also directly catalyzed from stainless steel substrate. The electrochemical performance of the the Ge_1-x Sn _x nanowires as an anode material for Li-ion batteries was investigated via galvanostatic cycling and detailed analysis of differential capacity plots (DCPs). The nanowire electrodes demonstrated an exceptional capacity retention of 93.4% from the 2nd to the 100th charge at a C/5 rate, while maintaining a specific capacity value of ∼921 mAh g^-1 after 100 cycles. Voltage profiles and DCPs revealed that the Ge_1-x Sn _x nanowires behave as an alloying mode anode material, as reduction/oxidation peaks for both Ge and Sn were observed, however it is clear that the reversible lithiation of Ge is responsible for the majority of the charge stored.

Ultrahigh and Durable Volumetric Lithium/Sodium Storage Enabled by a Highly Dense Graphene-Encapsulated Nitrogen-Doped Carbon@Sn Compact Monolith

Tin-based composites hold promise as anodes for high-capacity lithium/sodium-ion batteries (LIBs/SIBs); however, it is necessary to use carbon coated nanosized tin to solve the issues related to large volume changes during electrochemical cycling, thus leading to the low volumetric capacity for tin-based composites due to their low packing density. Herein, we design a highly dense graphene-encapsulated nitrogen-doped carbon@Sn (HD N-C@Sn/G) compact monolith with Sn nanoparticles double-encapsulated by N-C and graphene, which exhibits a high density of 2.6 g cm^-3 and a high conductivity of 212 S m^-1. The as-obtained HD N-C@Sn/G monolith anode exhibits ultrahigh and durable volumetric lithium/sodium storage. Specifically, it delivers a high volumetric capacity of 2692 mAh cm^-3 after 100 cycles at 0.1 A g^-1 and an ultralong cycling stability exceeding 1500 cycles at 1.0 A g^-1 with only 0.019% capacity decay per cycle in lithium-ion batteries. Besides, in situ TEM and ex situ SEM have revealed that the unique double-encapsulated structure effectively mitigates drastic volume variation of the tin nanoparticles during electrode cycling. Furthermore, the full cell using HD N-C@Sn/G as an anode and LiCoO₂ as a cathode displays a superior cycling stability. This work provides a new avenue and deep insight into the design of high-volumetric-capacity alloy-based anodes with ultralong cycle life.

Si and Ge-Based Anode Materials for Li-, Na-, and K-Ion Batteries: A Perspective from Structure to Electrochemical Mechanism

Silicon and germanium are among the most promising candidates as anodes for Li-ion batteries, meanwhile their potential application in sodium- and potassium-ion batteries is emerging. The access of their entire potential requires a comprehensive understanding of their electrochemical mechanism. This Review highlights the processes taking place during the alloying reaction of Si and Ge with the alkali ions. Several associated challenges, including the volumetric expansion, particle pulverization, and uncontrolled formation of solid electrolyte interphase layer must be surmounted and different strategies, such as nanostructures and electrode formulation, have been implemented. Additionally, a new approach based on the use of layered Si and Ge-based Zintl phases is presented. The versatility of this new family permits the tuning of their physical and chemical properties for specific applications. For batteries in particular, the layered structure buffers the volume expansion and exhibits an enhanced electronic conductivity, allowing high power applications.

Copper Silicide Nanowires as Hosts for Amorphous Si Deposition as a Route to Produce High Capacity Lithium-Ion Battery Anodes

Herein, copper silicide (Cu₁₅Si₄) nanowires (NWs) grown in high densities from a metallic Cu substrate are utilized as nanostructured hosts for amorphous silicon (aSi) deposition. The conductive Cu₁₅Si₄ NW scaffolds offer an increased surface area, versus planar substrates, and enable the preparation of high capacity Li-ion anodes consisting of a nanostructured active material. The formation method involves a two-step process, where Cu₁₅Si₄ nanowires are synthesized from a Cu substrate via a solvent vapor growth (SVG) approach followed by the plasma-enhanced chemical vapor deposition (PECVD) of aSi. These binder-free anodes are investigated in half-cell (versus Li-foil) and full-cell (versus LCO) configurations with discharge capacities greater than 2000 mAh/g retained after 200 cycles (half-cell) and reversible capacities of 1870 mAh/g exhibited after 100 cycles (full-cell). A noteworthy rate capability is also attained where capacities of up to 1367 mAh/g and 1520 mAh/g are exhibited at 5C in half-cell and full-cell configurations, respectively, highlighting the active material's promise for fast charging and high power applications. The anode material is characterized prior to cycling and after 1, 25, and 100 charge/discharge cycles, by scanning electron microscopy (SEM) and transmission electron microscopy (TEM), to track the effects of cycling on the material.

A sandwich-like Si/SiC/nanographite sheet as a high performance anode for lithium-ion batteries

Silicon/carbon (Si/C) nanocomposite anodes have attracted great interest for their use in lithium-ion batteries (LIBs). However, Si nanoparticles are difficult to stabilize on a carbon surface. Herein, we solve this stabilization problem by designing a Si/silicon carbide/nanographite sheet (Si/SiC/NanoG) nanocomposite. The Si/SiC/NanoG nanocomposite is synthesized by the magnesium thermal reduction of a mixture of silica (SiO2) nanoparticles and NanoG at low temperature, which results in a sandwich-like structure in which the middle SiC layer serves as a linker to stabilize the Si nanoparticles on the surface of NanoGs. Electrochemical characterization shows that the Si/SiC/NanoG nanocomposite anode exhibits outstanding electrochemical performance (an initial reversible capacity of 1135.4 mA h g-1 and 80.4% capacity retention after 100 cycles at 100 mA g-1). This high capacity retention is due to the strong connection between Si and NanoG through the interfacial SiC layer, which buffers the volume changes during the Li-Si alloying-dealloying process. This research will contribute to the design of advanced Si/C anode materials of LIBs.

Interstitial sodium and lithium doping effects on the electronic and mechanical properties of silicon nanowires: a DFT study

In this work, we present a theoretical study of the electronic band structure and the Young's modulus of hydrogen-passivated silicon nanowires (H-SiNWs), grown along the [110] crystallographic direction, as a function of the concentration of interstitial sodium (Na) and lithium (Li) atoms. The study is performed using the supercell scheme and the density functional theory (DFT), within the local density approximation (LDA). The results show that the presence of Na or Li atoms closes the former semiconducting band gap of the H-SiNWs and shifts the Fermi energy into the conduction band. The transition from semiconductor to metal occurs as soon as a single Na or Li atom is added to the nanowire and the number of occupied states near the Fermi level is larger for the H-SiNWs with Li atoms in comparison with those nanowires with the same concentration of Na atoms. The calculated formation energies reveal that the system becomes less stable when the concentration of Na and Li atoms augments. Moreover, the obtained binding energies indicate that Si-Li and Si-Na bonds are formed. It is worth mentioning that the binding energies of H-SiNWs with interstitial Li atoms are larger than those corresponding to the H-SiNWs with interstitial Na atoms. On the other hand, the Young's moduli of H-SiNWs with Na atoms are lower than those of pure H-SiNWs and their values diminish when the concentration of Na atoms increases. In contrast, Young's moduli of H-SiNWs present a non-monotonic behavior as a function of the concentration of interstitial Li atoms and for the largest studied concentration the nanowire fractures. These results give insight into the changes that electronic and mechanical properties of H-SiNWs suffer during the charge-discharge process, which should be taken into account in the design of electrodes of Na or Li-ion batteries.

A germanium and zinc chalcogenide as an anode for a high-capacity and long cycle life lithium battery

High-performance lithium ion batteries are ideal energy storage devices for both grid-scale and large-scale applications. Germanium, possessing a high theoretical capacity, is a promising anode material for lithium ion batteries, but still faces poor cyclability due to huge volume changes during the lithium alloying/dealloying process. Herein, we synthesized an amorphous germanium and zinc chalcogenide (GZC) with a hierarchically porous structure via a solvothermal reaction. As an anode material in a lithium ion battery, the GZC electrode exhibits a high reversible capacity of 747 mA h g-1 after 350 cycles at a current density of 100 mA g-1 and a stable capacity of 370 mA h g-1 after 500 cycles at a current density of 1000 mA g-1 along with 92% capacity retention. All of these outstanding electrochemical properties are attributed to the hierarchically porous structure of the electrode that has a large surface area, fast ion conductivity and superior structural stability, which buffers the volumetric variation during charge/discharge processes and also makes it easier for the electrolyte to soak in, affording more electrochemically active sites.

Adding Metal Carbides to Suppress the Crystalline Li15Si4 Formation: A Route toward Cycling Durable Si-Based Anodes for Lithium-Ion Batteries

In addition to large volume change and sluggish kinetics, the capacity decay of silicon anodes is also related to the formation of a crystalline Li₁₅Si₄ phase during cycling. Herein, we have demonstrated that refining cheap coarse-grained Si by ball milling with metal carbides (Mo₂C, Cr₂C₃, etc.) can reduce the Si crystallite size significantly and can thus suppress the formation of the crystalline Li₁₅Si₄ during cycling, which increases the life of Si-based anode materials significantly. Si-Cr₃C₂@few-layer graphene (SC@G) composite anode materials were designed and prepared by plasma milling (P-milling) to achieve a considerable capacity of 881.8 mA h g^-1 after 300 cycles at 1 A g^-1. A study of the microstructure of the SC@G indicated that the refined amorphous-nanocrystal Si grains were distributed uniformly around multiscale Cr₃C₂ particles, which were covered by few-layer graphenes. The rigid Cr₃C₂ skeleton, which acts as a good conductive material, can increase the conductivity of the SC@G composite, avoid the agglomeration of refined Si, and regenerate Si nanosized grains during lithiation and delithiation. These results showed that the SC@G anode material exhibited an excellent overall performance based on its high capacity and long cycle stability, as well as excellent lithium-ion diffusion kinetics for lithium storage.

A facile in situ synthesis of SiC&Si@CNT composite 3D frameworks as an anode material for lithium-ion batteries

SiC&Si@CNT composite 3D frameworks were successfully synthesized via an in situ reduction method of a C@SiO₂@CNT precursor. Owing to the extremely large amount of heat derived from magnesiothermic reduction, SiC particles of the SiC&Si@CNT composite were obtained by a reaction between Si and C. The amount of SiC could be adjusted by changing the poly-dopamine coating time. The SiC&Si@CNT composite is composed of reduced nano Si, fine SiC and CNTs. The as-prepared materials, particularly the SiC&Si@CNT-1 sample, show superior cycling performance and electrochemical characteristics as anode materials for lithium-ion batteries. In particular, the specific capacity of the SiC&Si@CNT-1 electrode reaches 1051.44 mA h g^-1 at 1 A g^-1 even after 880 cycles. Furthermore, the SiC&Si@CNT-1 electrode delivered ideal reversible capacities of 671.58 mA h g^-1 and 476.71 mA h g^-1 at high current densities of 4 A g^-1 and 8 A g^-1, respectively. The porous nanostructure of the SiC&Si@CNT composite 3D framework is beneficial for shortening the path of lithium-ion diffusion inside the electrode, alleviating the volume expansion and contraction during the cycling process. These results suggest that the SiC&Si@CNT composite 3D frameworks can be used as appropriate anode materials for lithium-ion batteries.

Graphene on Group-IV Elementary Semiconductors: The Direct Growth Approach and Its Applications

Since the first development of large-area graphene synthesis by the chemical vapor deposition (CVD) method in 2009, CVD-graphene has been considered to be a key material in the future electronics, energy, and display industries, which require transparent, flexible, and stretchable characteristics. Although many graphene-based prototype applications have been demonstrated, several important issues must be addressed in order for them to be compatible with current complementary metal-oxide-semiconductor (CMOS)-based manufacturing processes. In particular, metal contamination and mechanical damage, caused by the metal catalyst for graphene growth, are known to cause severe and irreversible deterioration in the performance of devices. The most effective way to solve the problems is to grow the graphene directly on the semiconductor substrate. Herein, recent advances in the direct growth of graphene on group-IV semiconductors are reviewed, focusing mainly on the growth mechanism and initial growth behavior when graphene is synthesized on Si and Ge. Furthermore, recent progress in the device applications of graphene with Si and Ge are presented. Finally, perspectives for future research in graphene with a semiconductor are discussed.

Flexible and High-Voltage Coaxial-Fiber Aqueous Rechargeable Zinc-Ion Battery

Extensive efforts have been devoted to construct a fiber-shaped energy-storage device to fulfill the increasing demand for power consumption of textile-based wearable electronics. Despite the myriad of available material selections and device architectures, it is still fundamentally challenging to develop eco-friendly fiber-shaped aqueous rechargeable batteries (FARBs) on a single-fiber architecture with high energy density and long-term stability. Here, we demonstrate flexible and high-voltage coaxial-fiber aqueous rechargeable zinc-ion batteries (CARZIBs). By utilizing a novel spherical zinc hexacyanoferrate with prominent electrochemical performance as cathode material, the assembled CARZIB offers a large capacity of 100.2 mAh cm^-3 and a high energy density of 195.39 mWh cm^-3, outperforming the state-of-the-art FARBs. Moreover, the resulting CARZIB delivers outstanding flexibility with the capacity retention of 93.2% after bending 3000 times. Last, high operating voltage and output current are achieved by the serial and parallel connection of CARZIBs woven into the flexible textile to power high-energy-consuming devices. Thus, this work provides proof-of-concept design for next-generation wearable energy-storage devices.

Tunable Core-Shell Nanowire Active Material for High Capacity Li-Ion Battery Anodes Comprised of PECVD Deposited aSi on Directly Grown Ge Nanowires

Herein, we report the formation of core@shell nanowires (NWs) comprised of crystalline germanium NW cores with amorphous silicon shells (Ge@aSi) and their performance as a high capacity Li-ion battery anode material. The Ge NWs were synthesized directly from the current collector in a solvent vapor growth (SVG) system and used as hosts for the deposition of the Si shells via a plasma-enhanced chemical vapor deposition (PECVD) process utilizing an expanding thermal plasma (ETP) source. The secondary deposition allows for the preparation of Ge@aSi core@shell structures with tunable Ge/Si ratios (2:1 and 1:1) and superior gravimetric and areal capacities, relative to pure Ge. The binder-free anodes exhibited discharge capacities of up to 2066 mAh/g and retained capacities of 1455 mAh/g after 150 cycles (for the 1:1 ratio). The 2:1 ratio showed a minimal ∼5% fade in capacity between the 20th and 150th cycles. Ex situ microscopy revealed a complete restructuring of the active material to an interconnected Si_{1- x}Ge _x morphology due to repeated lithiation and delithiation. In full-cell testing, a prelithiation step counteracted first cycle Li consumption and resulted in a 2-fold improvement to the capacity of the prelithiated cell versus the unconditioned full-cells. Remarkable rate capability was also delivered where capacities of 750 mAh/g were observed at a rate of 10 C.

Electrode Design from "Internal" to "External" for High Stability Silicon Anodes in Lithium-Ion Batteries

Building a stable electrode structure is an effective way to promote the practical applications of Si anode, which has large volume changes during charge/discharge process, in lithium-ion batteries. Herein, we fabricated an integrated electrode structure reinforced from "internal" to "external" to boost the performance of Si nanoparticles (NPs). The electrode contains the conductive polymer of poly(3,4-ethylene dioxythiophene):poly(styrenesulphonic acid) (PEDOT:PSS) as the binder, reduced graphene oxide (rGO), and hydroxylated Si NPs, which help form the "internal" interaction between them through the hydrogen bonding, while the "external" malleable network built by the flexible polymers and two-dimensional rGO sheets as the framework endows the highly flexible network to accommodate the Si expansion and forms long-range conductive network. Thus, the built-integrated electrode by the simple casting method shows high capacity, good rate performance, and long cycling stability. It is noted that such an electrode shows a high areal capacity of 3.29 mA h cm^-2 and a high volumetric capacity of 3290 A h cm^-3 at 0.09 mA cm^-2. The integrated electrode design is promising to promote the practical use of Si anodes and can be extended to other noncarbon anodes with large volume changes.

Nanocrystal Conversion-Assisted Design of Sn-Fe Alloy with a Core-Shell Structure as High-Performance Anodes for Lithium-Ion Batteries

Sn-based alloy materials are strong candidates to replace graphitic carbon as the anode for the next generation lithium-ion batteries because of their much higher gravimetric and volumetric capacity. A series of nanosize Sn _y Fe alloys derived from the chemical transformation of preformed Sn nanoparticles as templates have been synthesized and characterized. An optimized Sn₅Fe/Sn₂Fe anode with a core-shell structure delivered 541 mAh·g^-1 after 200 cycles at the C/2 rate, retaining close to 100% of the initial capacity. Its volumetric capacity is double that of commercial graphitic carbon. It also has an excellent rate performance, delivering 94.8, 84.3, 72.1, and 58.2% of the 0.1 C capacity (679.8 mAh/g) at 0.2, 0.5, 1 and 2 C, respectively. The capacity is recovered upon lowering the rate. The exceptional cycling/rate capability and higher gravimetric/volumetric capacity make the Sn _y Fe alloy a potential candidate as the anode in lithium-ion batteries. The understanding of Sn _y Fe alloys from this work also provides insight for designing other Sn-M (M = Co, Ni, Cu, Mn, etc.) system.

Enhancing the performance of germanium nanowire anodes for Li-ion batteries by direct growth on textured copper

Capacity retention of directly grown Ge nanowire anodes is enhanced by replacing stainless steel with textured Cu foil current collectors.

Axial Si-Ge Heterostructure Nanowires as Lithium-Ion Battery Anodes

Here, we report the application of axially heterostructured nanowires consisting of alternating segments of silicon and germanium with a tin seed as lithium-ion battery anodes. During repeated lithiation and delithiation, the heterostructures completely rearrange into a porous network of homogeneously alloyed Si_{1- x}Ge _x ligaments. The transformation was characterized through ex situ TEM, STEM, and Raman spectroscopy. Electrochemical analysis was conducted on the heterostructure nanowires with discharge capacities in excess of 1180 mAh/g for 400 cycles (C/5) and capacities of up to 613 mAh/g exhibited at a rate of 10 C.

Rigid TiO2-x coated mesoporous hollow Si nanospheres with high structure stability for lithium-ion battery anodes

Rigid oxygen-deficient TiO2-x coated mesoporous hollow Si nanospheres with a mechanically and electrically robust structure have been constructed through a facile method for high-performance Li-ion battery anodes. The mesoporous hollow structure provides enough inner void space for the expansion of Si. The oxygen-deficient TiO2-x coating has functions in three aspects: (1) avoiding direct contact between Si and the electrolyte; (2) suppressing the outward expansion of the mesoporous hollow Si nanospheres; (3) improving the conductivity of the composite. The combined effect leads to high interfacial stability and structural integrity of both the material nanoparticles and the whole electrode. By virtue of the rational design, the composite yields a high reversible specific capacity of 1750.4 mA h g-1 at 0.2 A g-1, an excellent cycling stability of 1303.1 mA h g-1 at 2 A g-1 with 84.5% capacity retention after 500 cycles, and a high rate capability of 907.6 mA h g-1 even at 4 A g-1.