Rapid Reversible Photoswitching of Integrin-Mediated Adhesion at the Single-Cell Level

Dynamic photoelectrical regulation of ECM protein and cellular behaviors

Dynamic regulation of cell-extracellular matrix (ECM)-material interactions is crucial for various biomedical applications. In this study, a light-activated molecular switch for the modulation of cell attachment/detachment behaviors was established on monolayer graphene (Gr)/n-type Silicon substrates (Gr/Si). Initiated by light illumination at the Gr/Si interface, pre-adsorbed proteins (bovine serum albumin, ECM proteins collagen-1, and fibronectin) underwent protonation to achieve negative charge transfer to Gr films (n-doping) through π-π interactions. This n-doping process stimulated the conformational switches of ECM proteins. The structural alterations in these ECM interactors significantly reduced the specificity of the cell surface receptor-ligand interaction (e.g., integrin recognition), leading to dynamic regulation of cell adhesion and eventual cell detachment. RNA-sequencing results revealed that the detached bone marrow mesenchymal stromal cell sheets from the Gr/Si system manifested regulated immunoregulatory properties and enhanced osteogenic differentiation, implying their potential application in bone tissue regeneration. This work not only provides a fast and feasible method for controllable cells/cell sheets harvesting but also gives new insights into the understanding of cell-ECM-material communications.

•

A light-activated molecular switch for regulation of cell attachment/detachment behaviors was established on (Gr/Si) substrates.

•

Light-induced charge transfer from ECM protein to Gr/Si through π-π interactions, resulting in the conformational alteration of ECM proteins.

•

Structural changes in ECM weakened the binding between RGD and integrin, inducing cell detachment.

•

This work provides a feasible method for cell harvesting and improves the understanding of cell-ECM-material communications.

Static and Dynamic Biomaterial Engineering for Cell Modulation

In the biological microenvironment, cells are surrounded by an extracellular matrix (ECM), with which they dynamically interact during various biological processes. Specifically, the physical and chemical properties of the ECM work cooperatively to influence the behavior and fate of cells directly and indirectly, which invokes various physiological responses in the body. Hence, efficient strategies to modulate cellular responses for a specific purpose have become important for various scientific fields such as biology, pharmacy, and medicine. Among many approaches, the utilization of biomaterials has been studied the most because they can be meticulously engineered to mimic cellular modulatory behavior. For such careful engineering, studies on physical modulation (e.g., ECM topography, stiffness, and wettability) and chemical manipulation (e.g., composition and soluble and surface biosignals) have been actively conducted. At present, the scope of research is being shifted from static (considering only the initial environment and the effects of each element) to biomimetic dynamic (including the concepts of time and gradient) modulation in both physical and chemical manipulations. This review provides an overall perspective on how the static and dynamic biomaterials are actively engineered to modulate targeted cellular responses while highlighting the importance and advance from static modulation to biomimetic dynamic modulation for biomedical applications.

Manipulating Nanoparticle Aggregates Regulates Receptor-Ligand Binding in Macrophages

The receptor-ligand interactions in cells are dynamically regulated by modulation of the ligand accessibility. In this study, we utilize size-tunable magnetic nanoparticle aggregates ordered at both nanometer and atomic scales. We flexibly anchor magnetic nanoparticle aggregates of tunable sizes over the cell-adhesive RGD ligand (Arg-Gly-Asp)-active material surface while maintaining the density of dispersed ligands accessible to macrophages at constant. Lowering the accessible ligand dispersity by increasing the aggregate size at constant accessible ligand density facilitates the binding of integrin receptors to the accessible ligands, which promotes the adhesion of macrophages. In high ligand dispersity, distant magnetic manipulation to lift the aggregates (which increases ligand accessibility) stimulates the binding of integrin receptors to the accessible ligands available under the aggregates to augment macrophage adhesion-mediated pro-healing polarization both in vitro and in vivo. In low ligand dispersity, distant control to drop the aggregates (which decreases ligand accessibility) repels integrin receptors away from the aggregates, thereby suppressing integrin receptor-ligand binding and macrophage adhesion, which promotes inflammatory polarization. Here, we present "accessible ligand dispersity" as a novel fundamental parameter that regulates receptor-ligand binding, which can be reversibly manipulated by increasing and decreasing the ligand accessibility. Limitless tuning of nanoparticle aggregate dimensions and morphology can offer further insight into the regulation of receptor-ligand binding in host cells.

Switchable Adhesion: On-Demand Bonding and Debonding

Adhesives have a long and illustrious history throughout human history. The development of synthetic polymers has highly improved adhesions in terms of their strength and environmental tolerance. As soft robotics, flexible electronics, and intelligent gadgets become more prevalent, adhesives with changeable adhesion capabilities will become more necessary. These adhesives should be programmable and switchable, with the ability to respond to light, electromagnetic fields, thermal, and other stimuli. These requirements necessitate novel concepts in adhesion engineering and material science. Considerable studies have been carried out to develop a wide range of adhesives. This review focuses on stimuli-responsive material-based adhesives, outlining current research on switchable and controlled adhesives, including design and manufacturing techniques. Finally, the potential for smart adhesives in applications, and the development of future adhesive forms are critically suggested.

Dynamic Ligand Screening by Magnetic Nanoassembly Modulates Stem Cell Differentiation

In native microenvironment, diverse physical barriers exist to dynamically modulate stem cell recruitment and differentiation for tissue repair. In this study, nanoassembly-based magnetic screens of various sizes are utilized, and they are elastically tethered over an RGD ligand (cell-adhesive motif)-presenting material surface to generate various nanogaps between the screens and the RGDs without modulating the RGD density. Large screens exhibiting low RGD distribution stimulate integrin clustering to facilitate focal adhesion, mechanotransduction, and differentiation of stem cells, which are not observed with small screens. Magnetic downward pulling of the large screens decreases the nanogaps, which dynamically suppress the focal adhesion, mechanotransduction, and differentiation of stem cells. Conversely, magnetic upward pulling of the small screens increases the nanogaps, which dynamically activates focal adhesion, mechanotransduction, and differentiation of stem cells. This regulation mechanism is also shown to be effective in the microenvironment in vivo. Further diversifying the geometries of the physical screens can further enable diverse modalities of multifaceted and safe unscreening of the distributed RGDs to unravel and modulate stem cell differentiation for tissue repair.

A Dual-Responsive Peptide-Based Smart Biointerface with Biomimetic Adhesive Behaviors for Bacterial Isolation

As mimics of the extracellular matrix, surfaces with the capability of capturing and releasing specific cells in a smart and controllable way play an important role in bacterial isolation. In this work, we fabricated a dual-responsive smart biointerface via peptide self-assembly and reversible covalent chemistry biomimetic adhesion behavior for bacterial isolation. Compared with that of the biointerface based on a single reversible covalent bond, the bacterial enrichment efficiency obtained in this work was 2.3 times higher. Furthermore, the release of bacteria from the surface could be achieved by dual responsiveness (sugar and enzyme), which makes the biointerface more adaptable and compatible under different conditions. Finally, the reusability of the biointerface was verified via peptide self-assembly and the regenerated smart biointerface still showed good bacterial capture stability and excellent release efficiency, which was highly anticipated to be more widely applied in biomaterial science and biomedicine in the future.

Quantifying force transmission through fibroblasts: changes of traction forces under external shearing

Mammalian cells have evolved complex mechanical connections to their microenvironment, including focal adhesion clusters that physically connect the cytoskeleton and the extracellular matrix. This mechanical link is also part of the cellular machinery to transduce, sense and respond to external forces. Although methods to measure cell attachment and cellular traction forces are well established, these are not capable of quantifying force transmission through the cell body to adhesion sites. We here present a novel approach to quantify intracellular force transmission by combining microneedle shearing at the apical cell surface with traction force microscopy at the basal cell surface. The change of traction forces exerted by fibroblasts to underlying polyacrylamide substrates as a response to a known shear force exerted with a calibrated microneedle reveals that cells redistribute forces dynamically under external shearing and during sequential rupture of their adhesion sites. Our quantitative results demonstrate a transition from dipolar to monopolar traction patterns, an inhomogeneous distribution of the external shear force to the adhesion sites as well as dynamical changes in force loading prior to and after the rupture of single adhesion sites. Our strategy of combining traction force microscopy with external force application opens new perspectives for future studies of force transmission and mechanotransduction in cells.

Magnetic Control and Real-Time Monitoring of Stem Cell Differentiation by the Ligand Nanoassembly

Native extracellular matrix (ECM) exhibits dynamic change in the ligand position. Herein, the ECM-emulating control and real-time monitoring of stem cell differentiation are demonstrated by ligand nanoassembly. The density of gold nanoassembly presenting cell-adhesive Arg-Gly-Asp (RGD) ligand on Fe₃ O₄ (magnetite) nanoparticle in nanostructures flexibly grafted to material is changed while keeping macroscale ligand density invariant. The ligand nanoassembly on the Fe₃ O₄ can be magnetically attracted to mediate rising and falling ligand movements via linker stretching and compression, respectively. High ligand nanoassembly density stimulates integrin ligation to activate the mechanosensing-assisted stem cell differentiation, which is monitored via in situ real-time electrochemical sensing. Magnetic control of rising and falling ligand movements hinders and promotes the adhesion-mediated mechanotransduction and differentiation of stem cells, respectively. These rising and falling ligand states yield the difference in the farthest distance (≈34.6 nm) of the RGD from material surface, thereby dynamically mimicking static long and short flexible linkers, which hinder and promote cell adhesion, respectively. Design of cytocompatible ligand nanoassemblies can be made with combinations of dimensions, shapes, and biomimetic ligands for remotely regulating stem cells for offering novel methodologies to advance regenerative therapies.

Contact probing of prestressed adhesive membranes of living cells

Atomic force microscopy (AFM) studies of living biological cells is one of main experimental tools that enable quantitative measurements of deformation of the cells and extraction of information about their structural and mechanical properties. However, proper modelling of AFM probing and related adhesive contact problems are of crucial importance for interpretation of experimental data. The Johnson-Kendall-Roberts (JKR) theory of adhesive contact has often been used as a basis for modelling of various phenomena including cell-cell interactions. However, strictly speaking the original JKR theory is valid only for contact of isotropic linearly elastic spheres, while the cell membranes are often prestressed. For the first time, effects caused by molecular adhesion for living cells are analytically studied taking into account the mechanical properties of cell membranes whose stiffness depends on the level of the tensile prestress. Another important question is how one can extract the work of adhesion between the probe and the cell. An extended version of the Borodich-Galanov method for non-direct extraction of elastic and adhesive properties of contacted materials is proposed to apply to experiments of cell probing. Evidently, the proposed models of adhesive contact for cells with prestressed membranes do not cover all types of biological cells because the structure and properties of the cells may vary considerably. However, the obtained results can be applied to many types of smooth cells and can be used to describe initial stages of contact and various other processes when effects of adhesion are of crucial importance. This article is part of a discussion meeting issue 'A cracking approach to inventing new tough materials: fracture stranger than friction'.

A versatile pH-responsive peptide based dynamic biointerface for tracking bacteria killing and infection resistance

Herein we reported a versatile dynamic biointerface based on pH-responsive peptide self-assembly and disassembly to capture the bacteria to avoid bacteria further infected tissue around that can release peptides from the surface in a slightly acidic environment to kill the bacteria with the specificity. The exposed biointerface still presented infection resistance.

Advances in Application of Azobenzene as a Trigger in Biomedicine: Molecular Design and Spontaneous Assembly

Azobenzene is a well-known derivative of stimulus-responsive molecular switches and has shown superior performance as a functional material in biomedical applications. The results of multiple studies have led to the development of light/hypoxia-responsive azobenzene for biomedical use. In recent years, long-wavelength-responsive azobenzene has been developed. Matching the longer wavelength absorption and hypoxia-response characteristics of the azobenzene switch unit to the bio-optical window results in a large and effective stimulus response. In addition, azobenzene has been used as a hypoxia-sensitive connector via biological cleavage under appropriate stimulus conditions. This has resulted in on/off state switching of properties such as pharmacology and fluorescence activity. Herein, recent advances in the design and fabrication of azobenzene as a trigger in biomedicine are summarized.

Remote Control of Time-Regulated Stretching of Ligand-Presenting Nanocoils In Situ Regulates the Cyclic Adhesion and Differentiation of Stem Cells

Native extracellular matrix (ECM) can exhibit cyclic nanoscale stretching and shrinking of ligands to regulate complex cell-material interactions. Designing materials that allow cyclic control of changes in intrinsic ligand-presenting nanostructures in situ can emulate ECM dynamicity to regulate cellular adhesion. Unprecedented remote control of rapid, cyclic, and mechanical stretching ("ON") and shrinking ("OFF") of cell-adhesive RGD ligand-presenting magnetic nanocoils on a material surface in five repeated cycles are reported, thereby independently increasing and decreasing ligand pitch in nanocoils, respectively, without modulating ligand-presenting surface area per nanocoil. It is demonstrated that cyclic switching "ON" (ligand nanostretching) facilitates time-regulated integrin ligation, focal adhesion, spreading, YAP/TAZ mechanosensing, and differentiation of viable stem cells, both in vitro and in vivo. Fluorescence resonance energy transfer (FRET) imaging reveals magnetic switching "ON" (stretching) and "OFF" (shrinking) of the nanocoils inside animals. Versatile tuning of physical dimensions and elements of nanocoils by regulating electrodeposition conditions is also demonstrated. The study sheds novel insight into designing materials with connected ligand nanostructures that exhibit nanocoil-specific nano-spaced declustering, which is ineffective in nanowires, to facilitate cell adhesion. This unprecedented, independent, remote, and cytocompatible control of ligand nanopitch is promising for regulating the mechanosensing-mediated differentiation of stem cells in vivo.

Reversibly Photo-Modulating Mechanical Stiffness and Toughness of Bioengineered Protein Fibers

Light-responsive materials have been extensively studied due to the attractive possibility of manipulating their properties with high spatiotemporal control in a non-invasive fashion. This stimulated the development of a series of photo-deformable smart devices. However, it remained a challenge to reversibly modulate the stiffness and toughness of bulk materials. Here, we present bioengineered protein fibers and their optomechanical manipulation by employing electrostatic interactions between supercharged polypeptides (SUPs) and an azobenzene (Azo)-based surfactant. Photo-isomerization of the Azo moiety from the E- to Z-form reversibly triggered the modulation of tensile strength, stiffness, and toughness of the bulk protein fiber. Specifically, the photo-induced rearrangement into the Z-form of Azo possibly strengthened cation-π interactions within the fiber material, resulting in an around twofold increase in the fiber's mechanical performance. The outstanding mechanical and responsive properties open a path towards the development of SUP-Azo fibers as smart stimuli-responsive mechano-biomaterials.

Single Chain Mean-Field Theory Study on Responsive Behavior of Semiflexible Polymer Brush

The application of single chain mean-field theory (SCMFT) on semiflexible chain brushes is reviewed. The worm-like chain (WLC) model is the best mode of semiflexible chain that can continuously recover to the rigid rod model and Gaussian chain (GC) model in rigid and flexible limits, respectively. Compared with the commonly used GC model, SCMFT is more applicable to the WLC model because the algorithmic complexity of the WLC model is much higher than that of the GC model in self-consistent field theory (SCFT). On the contrary, the algorithmic complexity of both models in SCMFT are comparable. In SCMFT, the ensemble average of quantities is obtained by sampling the conformations of a single chain or multi-chains in the external auxiliary field instead of solving the modified diffuse equation (MDE) in SCFT. The precision of this calculation is controlled by the number of bonds Nm used to discretize the chain contour length L and the number of conformations M used in the ensemble average. The latter factor can be well controlled by metropolis Monte Carlo simulation. This approach can be easily generalized to solve problems with complex boundary conditions or in high-dimensional systems, which were once nightmares when solving MDEs in SCFT. Moreover, the calculations in SCMFT mainly relate to the assemble averages of chain conformations, for which a portion of conformations can be performed parallel on different computing cores using a message-passing interface (MPI).

Large and Externally Positioned Ligand-Coated Nanopatches Facilitate the Adhesion-Dependent Regenerative Polarization of Host Macrophages

Macrophages can associate with extracellular matrix (ECM) demonstrating nanosequenced cell-adhesive RGD ligand. In this study, we devised barcoded materials composed of RGD-coated gold and RGD-absent iron nanopatches to show various frequencies and position of RGD-coated nanopatches with similar areas of iron and RGD-gold nanopatches that maintain macroscale and nanoscale RGD density invariant. Iron patches were used for substrate coupling. Both large (low frequency) and externally positioned RGD-coated nanopatches stimulated robust attachment in macrophages, compared with small (high frequency) and internally positioned RGD-coated nanopatches, respectively, which mediate their regenerative/anti-inflammatory M2 polarization. The nanobarcodes exhibited stability in vivo. We shed light into designing ligand-engineered nanostructures in an external position to facilitate host cell attachment, thereby eliciting regenerative host responses.

Turning Cell Adhesions ON or OFF with High Spatiotemporal Precision Using the Green Light Responsive Protein CarH

Spatiotemporal control of integrin-mediated cell adhesions to extracellular matrix regulates cell behavior with has numerous implications for biotechnological applications. In this work, two approaches for regulating cell adhesions in space and time with high precision are reported, both of which utilize green light. In the first design, CarH, which is a tetramer in the dark, is used to mask cRGD adhesion-peptides on a surface. Upon green light illumination, the CarH tetramer dissociates into its monomers, revealing the adhesion peptide so that cells can adhere. In the second design, the RGD motif is incorporated into the CarH protein tetramer such that cells can adhere to surfaces functionalized with this protein. The cell adhesions can be disrupted with green light, due to the disassembly of the CarH-RGD protein. Both designs allow for photoregulation with noninvasive visible light and open new possibilities to investigate the dynamical regulation of cell adhesions in cell biology.

Loss of the nuclear Wnt pathway effector TCF7L2 promotes migration and invasion of human colorectal cancer cells

The transcription factor TCF7L2 is indispensable for intestinal tissue homeostasis where it transmits mitogenic Wnt/β-Catenin signals in stem and progenitor cells, from which intestinal tumors arise. Yet, TCF7L2 belongs to the most frequently mutated genes in colorectal cancer (CRC), and tumor-suppressive functions of TCF7L2 were proposed. This apparent paradox warrants to clarify the role of TCF7L2 in colorectal carcinogenesis. Here, we investigated TCF7L2 dependence/independence of CRC cells and the cellular and molecular consequences of TCF7L2 loss-of-function. By genome editing we achieved complete TCF7L2 inactivation in several CRC cell lines without loss of viability, showing that CRC cells have widely lost the strict requirement for TCF7L2. TCF7L2 deficiency impaired G1/S progression, reminiscent of the physiological role of TCF7L2. In addition, TCF7L2-negative cells exhibited morphological changes, enhanced migration, invasion, and collagen adhesion, albeit the severity of the phenotypic alterations manifested in a cell-line-specific fashion. To provide a molecular framework for the observed cellular changes, we performed global transcriptome profiling and identified gene-regulatory networks in which TCF7L2 positively regulates the proto-oncogene MYC, while repressing the cell cycle inhibitors CDKN2C/CDKN2D. Consistent with its function in curbing cell motility and invasion, TCF7L2 directly suppresses the pro-metastatic transcription factor RUNX2 and impinges on the expression of cell adhesion molecules. Altogether, we conclude that the proliferation-stimulating activity of TCF7L2 persists in CRC cells. In addition, TCF7L2 acts as invasion suppressor. Despite its negative impact on cell cycle progression, TCF7L2 loss-of-function may thereby increase malignancy, which could explain why TCF7L2 is mutated in a sizeable fraction of colorectal tumors.

Theoretical Study of the Optimal Design of a UV-Controllable Smart Surface Decorated by a Hybrid Azobenzene-Containing Polymer Layer

Although grafting polymers onto surfaces is widely suggested for designing smart systems, optimizing the performance of such systems is not simple. In this article, we investigate an azo-polymer-based smart surface using the single-chain-in-mean-field theory. Through the numerical simulations, we study the adhesion/erasion transition of the system and show that the performance of the smart surface can be characterized by the difference between the effective nanoparticle-surface interactions in the UV-on and UV-off states. Further exploring the optimization of the smart surface, we find that the distribution function of the receptor can have typical bimodal characteristics, which is crucial for optimizing the position of the azo-bond along the azo-polymer, f. Moreover, the presence of the homopolymer is also essential for the optimal performance of the smart surface, and we build a reference map for the good combinations of f and the homopolymer design f_homo.

Immunoregulation of macrophages by dynamic ligand presentation via ligand-cation coordination

Macrophages regulate host responses to implants through their dynamic adhesion, release, and activation. Herein, we employ bisphosphonate (BP)-coated gold nanoparticle template (BNP) to direct the swift and convertible formation of Mg²⁺-functional Mg²⁺-BP nanoparticle (NP) on the BP-AuNP surface via reversible Mg²⁺-BP coordination, thus producing (Mg²⁺-BP)-Au dimer (MgBNP). Ethylenediaminetetraacetic acid-based Mg²⁺ chelation facilitates the dissolution of Mg²⁺-BP NP, thus enabling the reversion of the MgBNP to the BNP. This convertible nanoassembly incorporating cell-adhesive Mg²⁺ moieties directs reversible attachment and detachment of macrophages by BP and EDTA, without physical scraping or trypsin that could damage cells. The swift formation of RGD ligand- and Mg²⁺-bifunctional RGD-Mg²⁺-BP NP that yields (RGD-Mg²⁺-BP)-Au dimer (RGDBNP) further stimulates the adhesion and pro-regenerative M2-type polarization of macrophages, both in vitro and in vivo, including rho-associated protein kinase. This swift and non-toxic dimer formation can include diverse bio-functional moieties to regulate host responses to implants.

Control of macrophage adhesion and phenotype is important to biomaterial applications. Here, the authors report on the use of bisphosphonate coated gold nanoparticles by magnesium coordination for the controlled adhesion and polarisation of macrophages in vitro and in vivo and controlled cell release.

Optoregulated Biointerfaces to Trigger Cellular Responses

Optoregulated biointerfaces offer the possibility to manipulate the interactions between cell membrane receptors and the extracellular space. This Invited Feature Article summarizes recent efforts by our group and others during the past decade to develop light-responsive biointerfaces to stimulate cells and elicit cellular responses using photocleavable protecting groups (PPG) as our working tool. This article begins by providing a brief introduction to available PPGs, with a special focus on the widely used o-nitrobenzyl family, followed by an overview of molecular design principles for the control of bioactivity in the context of cell-material interactions and the characterization methods to use in following the photoreaction at surfaces. We present various light-guided cellular processes using PPGs, including cell adhesion, release, migration, proliferation, and differentiation, both in vitro and in vivo. Finally, this Invited Feature Article closes with our perspective on the current status and future challenges of this topic.

An In Situ Reversible Heterodimeric Nanoswitch Controlled by Metal-Ion-Ligand Coordination Regulates the Mechanosensing and Differentiation of Stem Cells

In situ and cytocompatible nanoswitching by external stimuli is highly appealing for reversibly regulating cellular adhesion and functions in vivo. Here, a heterodimeric nanoswitch is designed to facilitate in situ switchable and combinatorial presentation of integrin-binding cell-adhesive moieties, such as Mg²⁺ and Arg-Gly-Asp (RGD) ligand in nanostructures. In situ reversible nanoswitching is controlled by convertible coordination between bioactive Mg²⁺ and bisphosphonate (BP) ligand. A BP-coated gold-nanoparticle monomer (BP-AuNP) on a substrate is prepared to allow in situ assembly of cell-adhesive Mg²⁺ -active Mg-BP nanoparticles (NPs) on a BP-AuNP surface via Mg²⁺ -BP coordination, yielding heterodimeric nanostructures (switching "ON"). Ethylenediaminetetraacetic acid (EDTA)-based Mg²⁺ chelation allows in situ disassembly of Mg²⁺ -BP NP, reverting to Mg²⁺ -free monomer (switching "OFF"). This in situ reversible nanoswitching on and off of cell-adhesive Mg²⁺ presentation allows reversible cell adhesion and release in vivo, respectively, and spatiotemporally controls cyclic cell adhesion. In situ heterodimeric assembly of dual RGD ligand- and Mg²⁺ -active RGD-BP-Mg²⁺ NP (switching "Dual ON") further tunes and promotes focal adhesion, spreading, and differentiation of stem cells. The modular nature of this in situ nanoswitch can accommodate various bioactive nanostructures via metal-ion-ligand coordination to regulate diverse cellular functions in vivo in reversible and compatible manner.

Independent Control over Multiple Cell Types in Space and Time Using Orthogonal Blue and Red Light Switchable Cell Interactions

Independent control over multiple cell-material interactions with high spatiotemporal resolution is a key for many biomedical applications and understanding cell biology, as different cell types can perform different tasks in a multicellular context. In this study, the binding of two different cell types to materials is orthogonally controlled with blue and red light providing independent regulation in space and time. Cells expressing the photoswitchable protein cryptochrome 2 (CRY2) on cell surface bind to N-truncated CRY-interacting basic helix-loop-helix protein 1 (CIBN)-immobilized substrates under blue light and cells expressing the photoswitchable protein phytochrome B (PhyB ) on cell surface bind to phytochrome interaction factor 6 (PIF6)-immobilized substrates under red light, respectively. These light-switchable cell interactions provide orthogonal and noninvasive control using two wavelengths of visible light. Moreover, both cell-material interactions are dynamically switched on under light and reversible in the dark. The specificity of the CRY2/CIBN and PhyB/PIF6 interactions and their response to different wavelengths of light allow selectively activating the binding of one cell type with blue and the other cell type with red light in the presence of the other cell type.

Regulating the migration of smooth muscle cells by a vertically distributed poly(2-hydroxyethyl methacrylate) gradient on polymer brushes covalently immobilized with RGD peptides

The gradient localization of biological cues is of paramount importance to guide directional migration of cells. In this study, poly(2-hydroxyethyl methacrylate-co-glycidyl methacrylate)-block- poly(2-hydroxyethyl methacrylate) (P(HEMA-co-GMA)-b-PHEMA) brushes with a uniform underneath P(HEMA-co-GMA) layer and a gradient thickness of PHEMA blocks were prepared by using surface-initiated atom-transfer radical polymerization and a dynamically controlled polymerization process. The polymer chains were subsequently functionalized with the cell-adhesive arginine-glycine-aspartic acid (RGD) peptides by reaction with the glycidyl groups, and their structures and properties were characterized by X-ray photoelectron spectrometry (XPS), quartz crystal microbalance with dissipation (QCM-D) and air contact angle. Adhesion and migration processes of smooth muscle cells (SMCs) were then studied. Compared with those on the sufficiently exposed RGD surface, the cell adhesion and mobility were well maintained when the RGD peptides were localized at 18.9 nm depth, whereas the adhesion, spreading and migration rate of SMCs were significantly impaired when the RGD peptides were localized at a depth of 38.4 nm. On the RGD depth gradient surface, the SMCs exhibited preferential orientation and enhanced directional migration toward the direction of reduced thickness of the second PHEMA brushes. Half of the cells were oriented within ± 30° to the x-axis direction, and 72% of the cells moved directionally at the optimal conditions. Cell adhesion strength, arrangement of cytoskeleton, and gene and protein expression levels of adhesion-related proteins were studied to corroborate the mechanisms, demonstrating that the cell mobility is regulated by the complex and synergetic intracellular signals resulted from the difference in surface properties.

STATEMENT OF SIGNIFICANCE

Cell migration is of paramount importance for the processes of tissue repair and regeneration. So far, the gradient localization of biological cues perpendicular to the substrate, which is the usual case for the biological signaling molecules to locate in ECM in vivo, has been scarcely studied, and has not been used to guide the directional migration of cells. In this study, we prepare a depth gradient of RGD peptides along the polymer chains, which is used to guide the directional migration of SMCs after a second hydrophilic bock is prepared in a gradient manner. For the first time the directional migration of SMCs is achieved under the guidance of a depth gradient of RGD ligands. The mechanisms of different cell migration abilities are further discussed based on the results of cell adhesion, cell adhesion force, cytoskeleton alignment and expression of relative proteins and genes. This work paves a new strategy by fabricating a gradient polymer brushes with immobilized bioactive molecules to dominate the directional cell migration, and elucidates the mechanisms underlining the biased migration along RGD depth localization gradients, shedding a light for the design of novel biomaterials to control and guide cell migration and invasion.

About Chemical Strategies to Fabricate Cell-Instructive Biointerfaces with Static and Dynamic Complexity

Properly functioning cell-instructive biointerfaces are critical for healthy integration of biomedical devices in the body and serve as decisive tools for the advancement of our understanding of fundamental cell biological phenomena. Studies are reviewed that use covalent chemistries to fabricate cell-instructive biointerfaces. These types of biointerfaces typically result in a static presentation of predefined cell-instructive cues. Chemically defined, but dynamic cell-instructive biointerfaces introduce spatiotemporal control over cell-instructive cues and present another type of biointerface, which promises a more biomimetic way to guide cell behavior. Therefore, strategies that offer control over the lateral sorting of ligands, the availability and molecular structure of bioactive ligands, and strategies that offer the ability to induce physical, chemical and mechanical changes in situ are reviewed. Specific attention is paid to state-of-the-art studies on dynamic, cell-instructive 3D materials. Future work is expected to further deepen our understanding of molecular and cellular biological processes investigating cell-type specific responses and the translational steps toward targeted in vivo applications.

Sweet Switch: Sugar-Responsive Bioactive Surfaces Based on Dynamic Covalent Bonding

Smart bioactive surfaces that can modulate interactions with biological systems are of great interest. In this work, a surface with switchable bioactivity in response to sugars has been developed. It is based on dynamic covalent bonding between phenylboronic acid (PBA) and secondary hydroxyls on the "wide" rim of β-cyclodextrin (β-CD). The system reported consists of gold surface modified with PBA-containing polymer brushes and a series of functional β-CD derivatives conjugated to diverse bioactive ligands (CD-X). CD-X molecules are attached to the surface to give specified bioactivity such as capture of a specific protein or killing of attached bacteria. Subsequent treatment with cis-diol containing biomolecules having high affinity for PBA (e.g. fructose) leads to the release of CD-X together with the captured proteins, killed bacteria, and so forth from the surface. The surface bioactivity is thereby "turned off". Effectively, this constitutes an on-off bioactivity switch in a mild and noninvasive way, which has the potential in the design of dynamic bioactive surfaces for biomedical applications.

A Hollow-Structured CuS@Cu2 S@Au Nanohybrid: Synergistically Enhanced Photothermal Efficiency and Photoswitchable Targeting Effect for Cancer Theranostics

It is of great importance in drug delivery to fabricate multifunctional nanocarriers with intelligent targeting properties, for cancer diagnosis and therapy. Herein, hollow-structured CuS@Cu₂ S@Au nanoshell/satellite nanoparticles are designed and synthesized for enhanced photothermal therapy and photoswitchable targeting theranostics. The remarkably improved photothermal conversion efficiency of CuS@Cu₂ S@Au under 808 nm near-infrared (NIR) laser irradiation can be explained by the reduced bandgap and more circuit paths for electron transitions for CuS and Cu₂ S modified with Au nanoparticles, as calculated by the Vienna ab initio simulation package, based on density functional theory. By modification of thermal-isomerization RGD targeting molecules and thermally sensitive copolymer on the surface of nanoparticles, the transition of the shielded/unshielded mode of RGD (Arg-Gly-Asp) targeting molecules and shrinking of the thermally sensitive polymer by NIR photoactivation can realize a photoswitchable targeting effect. After loading an anticancer drug doxorubicin in the cavity of CuS@Cu₂ S@Au, the antitumor therapy efficacy is greatly enhanced by combining chemo- and photothermal therapy. The reported nanohybrid can also act as a photoacoustic imaging agent and an NIR thermal imaging agent for real-time imaging, which provides a versatile platform for multifunctional theranostics and stimuli-responsive targeted cancer therapy.

Visible-Light-Responsive Surfaces for Efficient, Noninvasive Cell Sheet Harvesting

Effective regulation of cell-surface interactions is critical for regenerative medicine and other cell-based therapies. Herein, visible-light-induced cell sheet harvesting based on silicon wafers with a p/n junction [Si(p/n)] is introduced. Cell sheets could quickly detach from the Si(p/n) surface after 10 min of visible-light illumination with maintained cell viability and functions. It is found that preadsorbed proteins on the Si(p/n) surface like BSA and collagen-I show light-induced desorption behaviors. Molecular dynamics simulation also indicates that long-range force caused by the photovoltaic effect of Si(p/n) under visible-light illumination plays a key role in triggering the release of the preadsorbed protein. It is suggested that such protein desorption behavior mediated by the photovoltaic effect is responsible for cell release. This work not only shows promising potential for cell sheet harvesting, but also provides new insights into protein-material interactions.

Cation-chelation and pH induced controlled switching of the non-fouling properties of bacterial crystalline films

We report the controlled loss of the anti-fouling activity of the S-layer protein SbpA from Lysinibacillus sphaericus (CCM2177). This protein forms crystal-like films with square lattice (p4) via self-assembly on almost any type of surfaces. Such engineered bioinspired nanometric membranes are known by their excellent preventive performance under biological conditions. However, their exposure to certain treatments can lead to gradual degradation of the S-protein layer. In this work, two distinctive approaches are studied for understanding either specific or non-specific degradation of the film, by treatment with a chelating agent (EDTA), which interacts with inner Ca²⁺ ions, or Citrate buffer (with pH<pI), respectively. Subsequently, the degraded protein films have been tested upon binding of polyelectrolytes of different charge and endothelial HUVEC cells, and their performance compared to that of intact S-layers. The SbpA protein layer degradation process as well as its impact on the loss of anti-fouling properties have been characterized, in terms of mass and structural changes, by means of real time quartz crystal microbalance with dissipation (QCM-D) monitoring, atomic force microscopy (AFM) experiments, and fluorescence microscopy. The results show that overall structure degradation (citrate buffer) has a higher impact on the loss of antifouling properties than selective removal of divalent cations. Thus, crystal structure integrity is a necessary condition for bacterial antifouling properties.

Adhesion forces and mechanics in mannose-mediated acanthamoeba interactions

The human pathogenic amoeba Acanthamoeba castellanii (A. castellanii) causes severe diseases, including acanthamoeba keratitis and encephalitis. Pathogenicity arises from the killing of target-cells by an extracellular killing mechanism, where the crucial first step is the formation of a close contact between A. castellanii and the target-cell. This process is mediated by the glycocalix of the target-cell and mannose has been identified as key mediator. The aim of the present study was to carry out a detailed biophysical investigation of mannose-mediated adhesion of A. castellanii using force spectroscopy on single trophozoites. In detail, we studied the interaction of a mannose-coated cantilever with an A. castellanii trophozoite, as mannose is the decisive part of the cellular glycocalix in mediating pathogenicity. We observed a clear increase of the force to initiate cantilever detachment from the trophozoite with increasing contact time. This increase is also associated with an increase in the work of detachment. Furthermore, we also analyzed single rupture events during the detachment process and found that single rupture processes are associated with membrane tether formation, suggesting that the cytoskeleton is not involved in mannose binding events during the first few seconds of contact. Our study provides an experimental and conceptual basis for measuring interactions between pathogens and target-cells at different levels of complexity and as a function of interaction time, thus leading to new insights into the biophysical mechanisms of parasite pathogenicity.

Taking Orders from Light: Photo-Switchable Working/Inactive Smart Surfaces for Protein and Cell Adhesion

Photoresponsive smart surfaces are promising candidates for a variety of applications in optoelectronics and sensing devices. The use of light as an order signal provides advantages of remote and noninvasive control with high temporal and spatial resolutions. Modification of the photoswitches with target biomacromolecules, such as peptides, DNA, and small molecules including folic acid derivatives and sugars, has recently become a popular strategy to empower the smart surfaces with an improved detection efficiency and specificity. Herein, we report the construction of photoswitchable self-assembled monolayers (SAMs) based on sugar (galactose/mannose)-decorated azobenzene derivatives and determine their photoswitchable, selective protein/cell adhesion performances via electrochemistry. Under alternate UV/vis irradiation, interconvertible high/low recognition and binding affinity toward selective lectins (proteins that recognize sugars) and cells that highly express sugar receptors are achieved. Furthermore, the cis-SAMs with a low binding affinity toward selective proteins and cells also exhibit minimal response toward unselective protein and cell samples, which offers the possibility in avoiding unwanted contamination and consumption of probes prior to functioning for practical applications. Besides, the electrochemical technique used facilitates the development of portable devices based on the smart surfaces for on-demand disease diagnosis.

High-Frequency Mechanostimulation of Cell Adhesion

Cell adhesion is regulated by molecularly defined protein interactions and by mechanical forces, which can activate a dynamic restructuring of adhesion sites. Previous attempts to explore the response of cell adhesion to forces have been limited to applying mechanical stimuli that involve the cytoskeleton. In contrast, we here apply a new, oscillatory type of stimulus through push-pull azobenzenes. Push-pull azobenzenes perform a high-frequency, molecular oscillation upon irradiation with visible light that has frequently been applied in polymer surface relief grating. We here use these oscillations to address single adhesion receptors. The effect of molecular oscillatory forces on cell adhesion has been analyzed using single-cell force spectroscopy and gene expression studies. Our experiments demonstrate a reinforcement of cell adhesion as well as upregulated expression levels of adhesion-associated genes as a result of the nanoscale "tickling" of integrins. This novel type of mechanical stimulus provides a previously unprecedented molecular control of cellular mechanosensing.