Tuning Ice Nucleation with Supercharged Polypeptides

Poly(l-alanine-co-l-threonine succinate) as a Biomimetic Cryoprotectant

We synthesized a series of [(l-Ala)x-co-(l-Thr succinate)y] (PATs), which are analogous to natural antifreezing glycoprotein with the structure of [l-Ala-l-Ala-l-Thr disaccharide]n, by varying the composition and degree of succinylation while fixing their molecular weight (Mn) and Ala/Thr ratio at approximately 10-12 kDa and 2:1, respectively. We investigated their ice recrystallization inhibition (IRI), ice nucleation inhibition (INI), dynamic ice shaping (DIS), thermal hysteresis (TH), and protein cryopreservation activities. Both IRI and INI activities were greater for PATs with higher l-Ala content (PATs-3 and PATs-4) than those with lower l-Ala content (PATs-1 and PATs-2). DIS activity with faceted crystal growth was clearly observed in PATs-2 and PATs-4 with a high degree of succinylation. TH was small with <0.1 °C for all PATs and slightly greater for PATs with a high l-Ala content. Except for PATs-1, the protein (lactate dehydrogenase, LDH) stabilization activity was excellent for all PATs studied, maintaining LDH activity as high as that of fresh LDH even after 15 freeze-thaw cycles. To conclude, the cryo-active biomimetic PATs were synthesized by controlling the l-Ala content and degree of succinylation. Our results showed that PATs with an l-Ala content of 65-70% and degree of succinylation of 12-19% exhibited the cryo-activities of IRI, INI, and DIS, and particularly promising properties for the cryoprotection of LDH protein.

Peptide/glycyrrhizic acid supramolecular polymer: An emerging medical adhesive for dural sealing and repairing

Medical adhesives have emerged as potential materials for sealing, hemostasis and wound repairing in modern clinical surgery. However, most of existing medical adhesives are still far away from the clinical requirements for simultaneously meeting desirable tissue adhesion, safety, biodegradability, anti-swelling property, and convenient operability. Here, we present an entirely new kind of peptide-based underwater adhesives, which are constructed via cross-linked supramolecular copolymerization between cationic short peptides and glycyrrhizic acid (GA) in an aqueous solution. We revealed the unique molecular mechanism of the peptide/GA supramolecular polymers and underlined the importance of arginine residues in the enhancement of the bulk cohesion of the peptide/GA adhesive. We thus concluded a design guideline that the peptide sequence has to be encoded with multiple arginine termini and hydrophobic residues. The resulting adhesives exhibited effective tissue adhesion, robust cohesion, low cell cytotoxicity, acceptable hemocompatibility, inappreciable inflammation response, appropriate biodegradability, and excellent anti-swelling property. More attractively, the dried peptide/GA powder was able to rapidly self-gel into adhesives by absorbing water, suggesting conveniently clinical operability. Animal experiments showed that the peptide/GA supramolecular polymers could be utilized as reliable medical adhesives for dural sealing and repairing.

Recombinant supercharged polypeptides for safe and efficient heparin neutralization

Heparin is a widely used anticoagulant agent in the clinic. After application, its anticoagulant effect must be reversed to prevent potential side effects. Protamine sulfate (PS) is the only clinically licensed antidote that has been used for this purpose in the last 80 years, which, however, provokes severe adverse effects, such as systemic hypotension and even death. Herein, we demonstrate the potential of supercharged polypeptides as a promising alternative for protamine sulfate. A series of supercharged polypeptides with multiple positive charges was recombinantly produced, and the heparin-neutralizing performance of the polypeptides was evaluated in comparison with PS. It was found that increasing the number of charges significantly enhanced the ability to neutralize heparin and resist the screening effect induced by salt. In particular, the polypeptide bearing 72 charges (K72) exhibited an excellent heparin-neutralizing behavior that was comparable to that of PS. Further in vivo studies revealed that the heparin-triggered bleeding was almost completely alleviated by K72 while a negligible toxic effect was observed. Therefore, such recombinant supercharged polypeptides might replace protamine sulfate as heparin-reversal agents.

Engineered Compounds to Control Ice Nucleation and Recrystallization

One of the greatest concerns in the subzero storage of cells, tissues, and organs is the ability to control the nucleation or recrystallization of ice. In nature, evidence of these processes, which aid in sustaining internal temperatures below the physiologic freezing point for extended periods of time, is apparent in freeze-avoidant and freeze-tolerant organisms. After decades of studying these proteins, we now have easily accessible compounds and materials capable of recapitulating the mechanisms seen in nature for biopreser-vation applications. The output from this burgeoning area of research can interact synergistically with other novel developments in the field of cryobiology, making it an opportune time for a review on this topic.

Super-Slippery Poly(Dimethylsiloxane) Brush Surfaces: From Fabrication to Practical Application

Superwetting surfaces with special slippery performances have been the focus of practical applications and basic research for decades. Compared to superhydrophobic/superoleophobic and slippery liquid-infused porous surfaces (SLIPS), liquid-like covalently attached poly(dimethylsiloxane) (PDMS) brush surfaces have no trouble in constructing the micro/nanostructure and the loss of infused lubricant, meanwhile, it can also provide lots of new advantages, such as smooth, transparent, pressure- and temperature-resistant, and low contact angle hysteresis (CAH) to diverse liquids. This paper focuses on the relationship between the wetting performance and practical functional application of PDMS brush surfaces. Recent progress of the preparation of PDMS brush surfaces and their super-slippery performances, with a special focus on diverse functional applications were summarized. Finally, perspectives on future research directions are also discussed.

Molecularly Engineered Protein Glues with Superior Adhesion Performance

Naturally inspired proteins are investigated for the development of bioglues that combine adhesion performance and biocompatibility for biomedical applications. However, engineering such adhesives by rational design of the proteins at the molecular level is rarely reported. Herein, it is shown that a new generation of protein-based glues is generated by supramolecular assembly through de novo designed structural proteins in which arginine triggers robust liquid-liquid phase separation. The encoded arginine moieties significantly strengthen multiple molecular interactions in the complex, leading to ultrastrong adhesion on various surfaces, outperforming many chemically reacted and biomimetic glues. Such adhesive materials enable quick visceral hemostasis in 10 s and outstanding tissue regeneration due to their robust adhesion, good biocompatibility, and superior antibacterial capacity. Remarkably, their minimum inhibitory concentrations are orders of magnitude lower than clinical antibiotics. These advances offer insights into molecular engineering of de novo designed protein glues and outline a general strategy to fabricate mechanically strong protein-based materials for surgical applications.

Silica as a Model Ice-Nucleating Particle to Study the Effects of Crystallinity, Porosity, and Low-Density Surface Functional Groups on Immersion Freezing

Aerosol particles can facilitate heterogeneous ice formation in the troposphere and stratosphere by acting as ice-nucleating particles, modulating cloud formation/dissipation, precipitation, and their microphysical properties. Heterogeneous ice nucleation is driven by ice embryo formation on the particle surface, which can be influenced by features of the surface such as crystallinity, surface structure, lattice structure, defects, and functional groups. To characterize the effect of crystallinity, pores, and surface functional groups toward ice nucleation, samples of comparable silica systems, specifically, quartz, ordered and nonordered porous amorphous silica samples with a range of pore sizes (2-11 nm), and nonporous functionalized silica spheres, were used as models for mineral dust aerosol particles. The ice nucleation activity of these samples was investigated by using an immersion freezing chamber. The results suggest that crystallinity has a larger effect than porosity on ice nucleation activity, as all of the porous silica samples investigated had lower onset freezing temperatures and lower ice nucleation activities than quartz. Our findings also suggest that pores alone are not sufficient to serve as effective active sites and need some additional chemical or physical property, like crystallinity, to nucleate ice in immersion mode freezing. The addition of a low density of organic functional groups to nonporous samples showed little enhancement compared to the inherent nucleation activity of silica with native surface hydroxyl groups. The density of functional groups investigated in this work suggests that a different arrangement of surface groups may be needed for enhanced immersion mode ice nucleation activity. In summary, crystallinity dictates the ice nucleation activity of silica samples rather than porosity or low-density surface functional groups. This work has broader implications regarding the climate impacts resulting from ice cloud formation.

Recent advances of bio-inspired anti-icing surfaces

The need for improved anti-icing surfaces is the demand of the time and closely related to many important aspects of our lives as surface icing threatens not only industrial production but also human safety. Freezing on a cold surface is usually a heterogeneous nucleation process induced by the substrate. Creating an anti-icing surface is mainly achieved by changing surface morphology and chemistry to regulate the interaction between the surface and the water/ice to inhibit freezing on the surface. In this paper, recent research progress in the creation of biomimetic anti-icing surfaces is reviewed. Firstly, basic strategies of bionic anti-icing are introduced, and then bionic anti-icing surface strategies are reviewed according to four aspects: the process of ice formation, including condensate self-removing, inhibiting ice nucleation, reducing ice adhesion, and melting accumulated ice on the surface. The remaining challenges and the direction of future development of biomimetic anti-icing surfaces are also discussed.

Do antifreeze proteins generally possess the potential to promote ice growth?

The binding of antifreeze proteins (AFPs) to ice needs to be mediated by interfacial water molecules. Our previous study of the effect of AFPs on the dynamics of the interfacial water of freezing at its initial stage has shown that AFPs can promote the growth of ice before binding to it. However, whether different AFPs can promote the freezing of water molecules on the basal and the prismatic surfaces of ice still needs further study. In the present contribution, five representative natural AFPs with different structures and different activities that can be adsorbed on the basal and/or prismatic surfaces of ice are investigated at the atomic level. Our results show that the phenomenon of promoting the growth of ice crystals is not universal. Only hyperactive AFPs (hypAFPs) can promote the growth of the basal plane of ice, while moderately active AFPs cannot. Moreover, this significant promotion is not observed on the prismatic plane regardless of their activity. Further analysis indicates that this promotion may result from the thicker ice/water interface of the basal plane, and the synergy of hypAFPs with ice crystals.

Gels as emerging anti-icing materials: a mini review

Gel materials have drawn great attention recently in the anti-icing research community due to their remarkable potential for reducing ice adhesion, inhibiting ice nucleation, and restricting ice propagation. Although the current anti-icing gels are in their infancy and far from practical applications due to poor durability, their outstanding prospect of icephobicity has already shed light on a new group of emerging anti-icing materials. There is a need for a timely review to consolidate the new trends and foster the development towards dedicated applications. Starting from the stage of icing, we first survey the relevant anti-icing strategies. The latest anti-icing gels are then categorized by their liquid phases into organogels, hydrogels, and ionogels. At the same time, the current research focuses, anti-icing mechanisms and shortcomings affiliated with each category are carefully analysed. Based upon the reported state-of-the-art anti-icing research and our own experience in polymer-based anti-icing materials, suggestions for the future development of the anti-icing gels are presented, including pathways to enhance durability, the need to build up the missing fundamentals, and the possibility to enable stimuli-responsive properties. The primary aim of this review is to motivate researchers in both the anti-icing and gel research communities to perform a synchronized effort to rapidly advance the understanding and making of gel-based next generation anti-icing materials.

Hyperactive Antifreeze Proteins Promote Ice Growth before Binding to It

The antifreeze mechanism of antifreeze proteins (AFPs) evolved by organisms has been widely studied. However, detailed knowledge of the synergy between AFPs and ice crystals still remains fragmentary. In the present contribution, the cooperative effect of the hyperactive insect antifreeze protein TmAFP and ice crystals on the interfacial water during the entire process of inhibiting ice growth is systematically investigated at the atomic level and compared with its low activity mutant and a nonantifreeze protein. The results indicate a significant synergy between TmAFP and ice crystals, which enables the TmAFP to promote the ice growth before adsorbing on the surfaces of the ice crystals, while the mutant and the nonantifreeze protein cannot promote the ice growth due to the lack of this synergy. When TmAFP approaches the ice surface, the interfacial water is induced by both the AFP and the ice crystals to form the anchored clathrate motif, which binds TmAFP to the ice surface, resulting in a local increase in the curvature of the ice surface, thereby inhibiting the growth of ice. In this study, three stages, namely, promotion, adsorption, and inhibition, are observed in the complete process of TmAFP inhibiting ice growth, and the synergistic mechanism between protein and ice crystals is revealed. The results are helpful for the design of antifreeze proteins and bioinspired antifreeze materials with superior performance.

Bioengineered Protein-based Adhesives for Biomedical Applications

Protein-based adhesives with their robust adhesion performance and excellent biocompatibility have been extensively explored over years. In particular, the unique adhesion behaviours of mussel and sandcastle worm inspired the development of synthetic adhesives. However, the chemical synthesized adhesives often demonstrate weak underwater adhesion performance and poor biocompatibility/biodegradability, limiting their further biomedical applications. In sharp contrast, genetically engineering endows the protein-based adhesives the ability to maintain underwater adhesion property as well as biocompatibility/biodegradability. Herein, we outline recent advances in the design and development of protein-based adhesives by genetic engineering. We summarize the fabrication and adhesion performance of elastin-like polypeptide-based adhesives, followed by mussel foot protein (mfp) based adhesives and other sources protein-based adhesives, such as, spider silk spidroin and suckerin. In addition, the biomedical applications of these bioengineered protein-based adhesives are presented. Finally, we give a brief summary and perspective on the future development of bioengineered protein-based adhesives.

Active coacervate droplets are protocells that grow and resist Ostwald ripening

Active coacervate droplets are liquid condensates coupled to a chemical reaction that turns over their components, keeping the droplets out of equilibrium. This turnover can be used to drive active processes such as growth, and provide an insight into the chemical requirements underlying (proto)cellular behaviour. Moreover, controlled growth is a key requirement to achieve population fitness and survival. Here we present a minimal, nucleotide-based coacervate model for active droplets, and report three key findings that make these droplets into evolvable protocells. First, we show that coacervate droplets form and grow by the fuel-driven synthesis of new coacervate material. Second, we find that these droplets do not undergo Ostwald ripening, which we attribute to the attractive electrostatic interactions and translational entropy within complex coacervates, active or passive. Finally, we show that the droplet growth rate reflects experimental conditions such as substrate, enzyme and protein concentration, and that a different droplet composition (addition of RNA) leads to altered growth rates and droplet fitness. These findings together make active coacervate droplets a powerful platform to mimic cellular growth at a single-droplet level, and to study fitness at a population level.

Synergistic Ice Inhibition Effect Enhances Rapid Freezing Cryopreservation with Low Concentration of Cryoprotectants

Despite recent advances in controlling ice formation and growth, it remains a challenge to design anti-icing materials in various fields from atmospheric to biological cryopreservation. Herein, tungsten diselenide (WSe2)-polyvinyl pyrrolidone (PVP) nanoparticles (NPs) are synthesized through one-step solvothermal route. The WSe2-PVP NPs show synergetic ice regulation ability both in the freezing and thawing processes. Molecularly speaking, PVP containing amides group can form hydrogen bonds with water molecules. At a macro level, the WSe2-PVP NPs show adsorption-inhibition and photothermal conversation effects to synergistically restrict ice growth. Meanwhile, WSe2-PVP NPs are for the first time used for the cryopreservation of human umbilical vein endothelial cell (HUVEC)-laden constructs based on rapid freezing with low concentrations of cryoprotectants (CPAs), the experimental results indicate that a minimal concentration (0.5 mg mL-1) of WSe2-PVP NPs can increase the viabilities of HUVECs in the constructs post cryopreservation (from 55.8% to 83.4%) and the cryopreserved constructs can also keep good condition in vivo within 7 days. Therefore, this work provides a novel strategy to synergistically suppress the formation and growth of the ice crystalsfor the cryopreservation of cells, tissues, or organs.

Ice Inhibition for Cryopreservation: Materials, Strategies, and Challenges

Cryopreservation technology has developed into a fundamental and important supporting method for biomedical applications such as cell-based therapeutics, tissue engineering, assisted reproduction, and vaccine storage. The formation, growth, and recrystallization of ice crystals are the major limitations in cell/tissue/organ cryopreservation, and cause fatal cryoinjury to cryopreserved biological samples. Flourishing anti-icing materials and strategies can effectively regulate and suppress ice crystals, thus reducing ice damage and promoting cryopreservation efficiency. This review first describes the basic ice cryodamage mechanisms in the cryopreservation process. The recent development of chemical ice-inhibition molecules, including cryoprotectant, antifreeze protein, synthetic polymer, nanomaterial, and hydrogel, and their applications in cryopreservation are summarized. The advanced engineering strategies, including trehalose delivery, cell encapsulation, and bioinspired structure design for ice inhibition, are further discussed. Furthermore, external physical field technologies used for inhibiting ice crystals in both the cooling and thawing processes are systematically reviewed. Finally, the current challenges and future perspectives in the field of ice inhibition for high-efficiency cryopreservation are proposed.

Controlling Optical and Catalytic Activity of Genetically Engineered Proteins by Ultrasound

Ultrasound (US) produces cavitation-induced mechanical forces stretching and breaking polymer chains in solution. This type of polymer mechanochemistry is widely used for synthetic polymers, but not biomacromolecules, even though US is biocompatible and commonly used for medical therapy as well as in vivo imaging. The ability to control protein activity by US would thus be a major stepping-stone for these disciplines. Here, we provide the first examples of selective protein activation and deactivation by means of US. Using GFP as a model system, we engineer US sensitivity into proteins by design. The incorporation of long and highly charged domains enables the efficient transfer of force to the protein structure. We then use this principle to activate the catalytic activity of trypsin by inducing the release of its inhibitor. We expect that this concept to switch "on" and "off" protein activity by US will serve as a blueprint to remotely control other bioactive molecules.

Biomimetic Brushlike Slippery Coatings with Mechanically Robust, Self-Cleaning, and Icephobic Properties

In this work, a facile strategy was proposed to prepare a series of brushlike thermoplastic polyurethane (TPU) coatings with mechanically robust, self-cleaning, and icephobic performance. Through a simple multicomponent click reaction of thiolactone with a diamine compound and mono-ethenyl-terminated polydimethylsiloxane (mono-ethenyl-PDMS), a diol with amide groups and flexible PDMS was synthesized, and a novel TPU could be obtained productively by a reaction of isocyanate and diol. The unique chain structure endowed TPU films with ascendant self-stratifying properties. During solvent vapor annealing, flexible PDMS chains migrated and enriched to the surface while urethane linkages with a strong interaction tended to locate at the substrate. Based on this, TPU-PDMS films exhibited mechanically robust property, and the tensile strength value of TPU-PDMS-3 showed a sharp increase to 48.62 MPa. The resultant TPU-PDMS-10 coatings exhibited a water repellent behavior and possessed superior movability of droplet water, and also the dirt on it could be readily removed by rinsing with water without leaving any traces. Furthermore, three different criteria were used to characterize the icephobic performance. The coatings exhibited a significantly lower freezing point (approximately -27 °C) of supercooled water, longer delay-icing time, and less ice adhesion shear strength. Therefore, these novel brushlike TPU coatings have tremendous potential applications.

Water Freezes at Near-Zero Temperatures Using Carbon Nanotube-Based Electrodes under Static Electric Fields

Although static electric fields have been effective in controlling ice nucleation, the highest freezing temperature (T_f) of water that can be achieved in an electric field (E) is still uncertain. We performed a systematic study of the effect of an electric field on water freezing by varying the thickness of a dielectric layer and the voltage across it in an electrowetting system. Results show that T_f first increases sharply with E and then reaches saturation at -3.5 °C after a critical value E of 6 × 10⁶ V/m. Using classical heterogeneous nucleation theory, it is revealed that this behavior is due to saturation in the contact angle of the ice embryo with the underlying substrate. Finally, we show that it is possible to overcome this freezing saturation by controlling the uniformity of the electric field using carbon nanotubes. We achieve a T_f of -0.6 °C using carbon nanotube-based electrodes with an E of 3 × 10⁷ V/m. This work sheds new light on the control of ice nucleation and has the potential to impact many applications ranging from food freezing to ice production.

Heterogeneous Electrofreezing of Super-Cooled Water on Surfaces of Pyroelectric Crystals is Triggered by Trigonal Planar Ions

Electrofreezing experiments of super-cooled water (SCW) with different ions, performed directly on the charged hemihedral faces of pyroelectric LiTaO₃ and AgI crystals, in the presence and in the absence of pyroelectric charge are reported. It is demonstrated that bicarbonate (HCO₃ ^- ) ions elevate the icing temperature near the positively charged faces. In contrast, the hydronium (H₃ O⁺ ) slightly reduces the icing temperature. Molecular dynamics simulations suggest that the hydrated trigonal planar HCO₃ ^- ions self-assemble with water molecules near the surface of the AgI crystal as clusters of slightly different configuration from those of the ice-like hexagons. These clusters, however, have a tendency to serve as embryonic nuclei for ice crystallization. Consequently, we predicted and experimentally confirmed that the trigonal planar ions of NO₃ ^- and guanidinium (Gdm⁺ ), at appropriate concentrations, elevate the icing temperature near the positive and negative charged surfaces, respectively. On the other hand, the Cl^- and SO₄ ^2- ions of different configurations reduce the icing temperature.

Hydrogels as Durable Anti-Icing Coatings Inhibit and Delay Ice Nucleation

The accumulation of ice on surfaces brings dangerous and costly problems to our daily life. Thus, it would be desirable to design anti-icing coatings for various surfaces. We report a durable anti-icing coating based on mussel-inspired chemistry, which is enabled via fabricating a liquid water layer, achieved by modifying solid substrates with the highly water absorbing property of sodium alginate. Dopamine, the main component of the mussel adhesive protein, is introduced to anchor the sodium alginate in order to render the coating applicable to all types of solid surfaces. Simultaneously, it serves as the cross-linking agent for sodium alginate; thus, the cross-linking degree of the coatings could be easily varied. The non-freezable and freezable water in the coatings with different cross-link degrees all remain liquid-like at subzero conditions and synergistically fulfill the aim of decreasing the temperature of ice nucleation. These anti-icing coatings display excellent stability even under harsh conditions. Furthermore, these coatings can be applied to almost all types of solid surfaces and have great promise in practical applications.

Supercharged Proteins and Polypeptides

Electrostatic interactions play a vital role in nature. Biomacromolecules such as proteins are orchestrated by electrostatics, among other intermolecular forces, to assemble and organize biochemistry. Natural proteins with a high net charge exist in a folded state or are unstructured and can be an inspiration for scientists to artificially supercharge other protein entities. Recent findings show that supercharging proteins allows for control of their properties such as temperature resistance and catalytic activity. One elegant method to transfer the favorable properties of supercharged proteins to other proteins is the fabrication of fusions. Genetically engineered, supercharged unstructured polypeptides (SUPs) are just one promising fusion tool. SUPs can also be complexed with artificial entities to yield thermotropic and lyotropic liquid crystals and liquids. These architectures represent novel bulk materials that are sensitive to external stimuli. Interestingly, SUPs undergo fluid-fluid phase separation to form coacervates. These coacervates can even be directly generated in living cells or can be combined with dissipative fiber assemblies that induce life-like features. Supercharged proteins and SUPs are developed into exciting classes of materials. Their synthesis, structures, and properties are summarized. Moreover, potential applications are highlighted and challenges are discussed.

Liquid-Infused Micro-Nanostructured MOF Coatings (LIMNSMCs) with High Anti-Icing Performance

In this article, a new kind of anti-icing material, liquid-infused micro-nanostructured MOF coating (LIMNSMC), was designed and prepared. The porous micro-nanostructures of metal-organic framework (MOF) coating were first utilized to immobilize the lubricating liquid. The anti-icing performance of LIMNSMC could be tuned by the viscosity, the amount of lubricating liquid, and the surface morphology. Under appropriate conditions, the LIMNSMC shows high anti-icing performance with the condensed water-freezing temperature of approximately -39 °C and the ice adhesion strength of approximately 10 kPa as the micro-nanostructures of MOF coating reduce the contact area and hinder the heat transfer between the surface and water droplets, and the lubricating layer effectively reduces the heterogeneous nucleation sites on the surface, as well as reduces the ice adhesion. LIMNSMCs exhibit good durability as the lubricating liquid can be effectively immobilized by the nanopores of MOFs. So, the high anti-icing performance of LIMNSMCs could be maintained throughout 10 freezing/melting cycles and six icing/de-icing cycles and slightly decreased after high-speed centrifugation and 50 abrasion cycles.

Metal-catechol complexes mediate ice nucleation

The capability of mediating ice nucleation is pertinent to a broad range of fields. Herein, inspired by metal-catechol coordination found in adhesive proteins in which catechol moieties can construct strong complexes with a diverse array of metal ions, we develop a platform for mediating ice nucleation based on metal-catechol complexes and demonstrate that ice nucleation can be successively mediated by varying the characteristics and valence of the metal in metal-catechol complexes.

Bioinspired Materials for Controlling Ice Nucleation, Growth, and Recrystallization

Ice formation, mainly consisting of ice nucleation, ice growth, and ice recrystallization, is ubiquitous and crucial in wide-ranging fields from cryobiology to atmospheric physics. Despite active research for more than a century, the mechanism of ice formation is still far from satisfactory. Meanwhile, nature has unique ways of controlling ice formation and can provide resourceful avenues to unravel the mechanism of ice formation. For instance, antifreeze proteins (AFPs) protect living organisms from freezing damage via controlling ice formation, for example, tuning ice nucleation, shaping ice crystals, and inhibiting ice growth and recrystallization. In addition, AFP mimics can have applications in cryopreservation of cells, tissues, and organs, food storage, and anti-icing materials. Therefore, continuous efforts have been made to understand the mechanism of AFPs and design AFP inspired materials. In this Account, we first review our recent research progress in understanding the mechanism of AFPs in controlling ice formation. A Janus effect of AFPs on ice nucleation was discovered, which was achieved via selectively tethering the ice-binding face (IBF) or the non-ice-binding face (NIBF) of AFPs to solid surfaces and investigating specifically the effect of the other face on ice nucleation. Through molecular dynamics (MD) simulation analysis, we observed ordered hexagonal ice-like water structure atop the IBF and disordered water structure atop the NIBF. Therefore, we conclude that the interfacial water plays a critical role in controlling ice formation. Next, we discuss the design and fabrication of AFP mimics with capabilities in tuning ice nucleation and controlling ice shape and growth, as well as inhibiting ice recrystallization. For example, we tuned ice nucleation via modifying solid surfaces with supercharged unfolded polypeptides (SUPs) and polyelectrolyte brushes (PBs) with different counterions. We found graphene oxide (GO) and oxidized quasi-carbon nitride quantum dots (OQCNs) had profound effects in controlling ice shape and inhibiting ice growth. We also studied the ion-specific effect on ice recrystallization inhibition (IRI) with a large variety of anions and cations. All functionalities are achieved by tuning the properties of interfacial water on these materials, which reinforces the importance of the interfacial water in controlling ice formation. Finally, we review the development of novel application-oriented materials emerging from our enhanced understanding of ice formation, for example, ultralow ice adhesion coatings with aqueous lubricating layer, cryopreservation of cells by inhibiting ice recrystallization, and two-dimensional (2D) and three-dimensional (3D) porous materials with tunable pore sizes through recrystallized ice crystal templates. This Account sheds new light on the molecular mechanism of ice formation and will inspire the design of unprecedented functional materials based on controlled ice formation.

Enhancing the Mechanical Durability of Icephobic Surfaces by Introducing Autonomous Self-Healing Function

Ice accretion presents a severe risk for human safety. Although great efforts have been made for developing icephobic surfaces (the surface with an ice adhesion strength below 100 kPa), expanding the lifetime of state-of-the-art icephobic surfaces still remains a critical unsolved issue. Herein, a novel icephobic material is designed by integrating an interpenetrating polymer network (IPN) into an autonomous self-healing elastomer, which is applied in anti-icing for enhancing the mechanical durability. The molecular structure, surface morphology, mechanical properties, and durable icephobicity of the material were studied. The creep behaviors of the new icephobic material, which were absent in most relevant studies on self-healing materials, were also investigated in this work. Significantly, the material showed great potentials for anti-icing applications with an ultralow ice adhesion strength of 6.0 ± 0.9 kPa, outperforming many other icephobic surfaces. The material also exhibited an extraordinary durability, showing a very low long-term ice adhesion strength of ∼12.2 kPa after 50 icing/deicing cycles. Most importantly, the material was able to exhibit a self-healing property from mechanical damages in a sufficiently short time, which shed light on the longevity of icephobic surfaces in practical applications.

Self-Assembly of Electrostatic Cocrystals from Supercharged Fusion Peptides and Protein Cages

Self-assembly is a convenient process to arrange complex biomolecules into large hierarchically ordered structures. Electrostatic attraction between the building blocks is a particularly interesting driving force for the assembly process, as it is easily tunable and reversible. Large biomolecules with high surface charge density, such as proteins and protein cages, are very promising building blocks due to their uniform size and shape. Assemblies of functional molecules with well-defined nanostructures have wide-ranging applications but are difficult to produce precisely by synthetic methods. Furthermore, obtaining highly ordered structures is an important prerequisite for X-ray structure analysis. Here we show how negatively charged ferritin and viral protein cages can adopt specific cocrystal structures with supercharged cationic polypeptides (SUPs, K72) and their recombinant fusions with green fluorescent protein (GFP-K72). The cage structures and recombinant proteins self-assemble in aqueous solution to large ordered structures, where the structure morphology and size are controlled by the ratio of oppositely charged building blocks and the electrolyte concentration. Both ferritin and viral cages form cocrystals with face centered cubic structure and lattice constants of 14.0 and 28.5 nm, respectively. The crystals are porous and the cationic recombinant proteins occupy the voids between the cages. Such systems resemble naturally occurring occlusion bodies and may serve as protecting agents as well as aid the structure determination of biomolecules by X-ray scattering.

Ballistic Jumping Drops on Superhydrophobic Surfaces via Electrostatic Manipulation

The ballistic ejection of liquid drops by electrostatic manipulating has both fundamental and practical implications, from raindrops in thunderclouds to self-cleaning, anti-icing, condensation, and heat transfer enhancements. In this paper, the ballistic jumping behavior of liquid drops from a superhydrophobic surface is investigated. Powered by the repulsion of the same kind of charges, water drops can jump from the surface. The electrostatic acting time for the jumping of a microliter supercooled drop only takes several milliseconds, even shorter than the time for icing. In addition, one can control the ballistic jumping direction precisely by the relative position above the electrostatic field. The approach offers a facile method that can be used to manipulate the ballistic drop jumping via an electrostatic field, opening the possibility of energy efficient drop detaching techniques in various applications.

Fabrication of Anti-Icing Surfaces by Short α-Helical Peptides

We designed 12-amino acid peptides as antifreeze protein (AFP) mimetics and tuned the antifreeze activity of the peptides by their structures. Moreover, these short peptides were first immobilized to surfaces as an anti-icing coating. We discovered that the peptides with higher antifreeze activity exhibited better anti-icing performance. It is the first time that short peptides were successfully applied to fabricate anti-icing surfaces, which is certainly advantageous in comparison to the AFP anti-icing coatings previously reported.

Fundamental interfacial mechanisms underlying electrofreezing

This article reviews the fundamental interfacial mechanisms underlying electrofreezing (promotion of ice nucleation via the application of an electric field). Electrofreezing has been an active research topic for many decades, with applications in food preservation, cryopreservation, cryogenics and ice formation. There is substantial literature detailing experimental and simulations-based studies, which aim to understand the complex mechanisms underlying accelerated ice nucleation in the presence of electric fields and electrical charge. This work provides a critical review of all such studies. It is noted that application-focused studies of electrofreezing are excluded from this review; such studies have been previously reviewed in literature. This review focuses only on fundamental studies, which analyze the physical mechanisms underlying electrofreezing. Topics reviewed include experimental studies on electrofreezing (DC and AC electric fields), pyroelectricity-based control of freezing, molecular dynamics simulations of electrofreezing, and thermodynamics-based explanations of electrofreezing. Overall, it is seen that electrofreezing can enable disruptive advancements in the control of liquid-to-solid phase change, and that our current understanding of the underlying mechanisms can be significantly improved through further studies of various interfacial effects coming into play.

A Simple Optoelectronic Tongue Discriminates Amino Acids

A self-assembled nine-element optoelectronic tongue consisting of a positively charged water-soluble poly(para-phenyleneethynylene) and three metal ions (Fe²⁺ , Co²⁺ , and Cu²⁺ ) at three different pH values (7, 10, and 13) discriminates all of the 20 natural amino acids in water. Unknown identification was not ideal. Addition of a highly positively charged green fluorescent protein in the presence of Fe²⁺ , Co²⁺ , and Cu²⁺ increased the unknown identification to above 86 %. Linear discriminant analysis (LDA) orders the responses according to the amino acid type, that is, hydrophobic, polar, anionic, or cationic.

Liquefaction of Biopolymers: Solvent-free Liquids and Liquid Crystals from Nucleic Acids and Proteins

Biomacromolecules, such as nucleic acids, proteins, and virus particles, are persistent molecular entities with dimensions that exceed the range of their intermolecular forces hence undergoing degradation by thermally induced bond-scission upon heating. Consequently, for this type of molecule, the absence of a liquid phase can be regarded as a general phenomenon. However, certain advantageous properties usually associated with the liquid state of matter, such as processability, flowability, or molecular mobility, are highly sought-after features for biomacromolecules in a solvent-free environment. Here, we provide an overview over the design principles and synthetic pathways to obtain solvent-free liquids of biomacromolecular architectures approaching the topic from our own perspective of research. We will highlight the milestones in synthesis, including a recently developed general surfactant complexation method applicable to a large variety of biomacromolecules as well as other synthetic principles granting access to electrostatically complexed proteins and DNA.

These synthetic pathways retain the function and structure of the biomacromolecules even under extreme, nonphysiological conditions at high temperatures in water-free melts challenging the existing paradigm on the role of hydration in structural biology. Under these conditions, the resulting complexes reveal their true potential for previously unthinkable applications. Moreover, these protocols open a pathway toward the assembly of anisotropic architectures, enabling the formation of solvent-free biomacromolecular thermotropic liquid crystals. These ordered biomaterials exhibit vastly different mechanical properties when compared to the individual building blocks. Beyond the preparative aspects, we will shine light on the unique potential applications and technologies resulting from solvent-free biomacromolecular fluids: From charge transport in dehydrated liquids to DNA electrochromism to biocatalysis in the absence of a protein hydration shell. Moreover, solvent-free biological liquids containing viruses can be used as novel storage and process media serving as a formulation technology for the delivery of highly concentrated bioactive compounds. We are confident that this new class of hybrid biomaterials will fuel further studies and applications of biomacromolecules beyond water and other solvents and in a much broader context than just the traditional physiological conditions.

A superrepellent coating with dynamic fluorine chains for frosting suppression: effects of polarity, coalescence and ice nucleation free energy barrier

We designed 3 types oleophobic smooth surface (DTMS, FAS13, FAS17) with dynamic molecular chains and investigated their anti-frosting property under freezing conditions.