Multifunctional Nanoparticles Self-Assembled from Small Organic Building Blocks for Biomedicine

Vapor-Tailored Nanojunctions in Ultraporous ZnO Nanoparticle Networks for Superior UV Photodetection

High quality nanojunctions are known to effectively improve the conductivity and structural robustness of ultraporous nanoparticle networks, surpassing the performance of natural van der Waals interfaces. Nevertheless, the traditional approach of forming these junctions by thermal annealing is incompatible with thermolabile polymers and slender metal electrodes found in modern wearable technologies. Herein, we present a low temperature, solvent vapor-based method to rapidly elicit high-quality metal-oxide nanojunctions in a fast, effortless, inexpensive, and easily scalable process; capable of generating necked interparticle interfaces in a matter of minutes. When applied to ultraporous-based ZnO Ultraviolet (UV) photodetectors, the vapor-tailoring process produces an incredible 128,000-fold improvement in responsivity (6.6 A.W-1) over untreated structures (51.2 µA.W-1), and a 5300-fold improvement in responsivity over thermally annealed structures; all while maintaining exceptionally low dark currents of 140 pA at a low bias voltage of 1 V. Most importantly, the exceptional performance enabled by room temperature synthesis suggests high potential adaptability of this process toward wearable UV sensors, shedding lights on the strategy of modifying weakly bonded porous nanostructures for improved physical properties.

Biodynamers: applications of dynamic covalent chemistry in single-chain polymer nanoparticles

Dynamic Covalent Chemistry (DCC) enables the development of responsive molecular systems through the integration of reversible bonds at the molecular level. These systems are thermodynamically stable and capable of undergoing various molecular assemblies and transformations, allowing them to adapt to changes in environmental conditions like temperature and pH. Introducing DCC into the field of polymer science has led to the design of Single-Chain Nanoparticles (SCNPs), which are formed by self-folding via intramolecular crosslinking mechanisms. Defined by their adaptability, SCNPs mimic biopolymers in size and functionality. Biodynamers, a subclass of SCNPs, are specifically designed for their stimuli-responsive and tunable, dynamic properties. Mimicking complex biological structures, their scope of application includes target-specific and pH-responsive drug delivery, enhanced cellular uptake and endosomal escape. In this manuscript, we discuss the integration of DCC for the design of SCNPs, focusing particularly on the characteristics of biodynamers and their biomedical and pharmaceutical applications. By underlining their potential, we highlight the factors driving the growing interest in SCNPs, providing an overview of recent developments and future perspectives in this research field.

Development of a Supermolecular Radionuclide-Drug Conjugate System for Integrated Radiotheranostics for Non-small Cell Lung Cancer

Radionuclide-drug conjugates (RDCs) designed from small molecule or nanoplatform shows complementary characteristics. We constructed a new RDC system with integrated merits of small molecule and nanoplatform-based RDCs. Erlotinib was labeled with 131I to construct the bulk of RDC (131I-ER). Floxuridine was mixed with 131I-ER to develop a hydrogen bond-driving supermolecular RDC system (131I-ER-Fu NPs). The carrier-free 131I-ER-Fu NPs supermolecule not only demonstrated integrated merits of small molecule and nanoplatform-based RDC, including clear structure definition, stable quality control, prolonged circulation lifetime, enhanced tumor specificity and retention, and rapidly nontarget clearance, but also exhibited low biological toxicity and stronger antitumor effects. In vivo imaging also revealed its application for tumor localization of nonsmall cell lung cancer (NSCLC) and screening of patients suitable for epidermal growth factor receptor-tyrosine kinase inhibitor (EGFR-TKI) therapy. We considered that 131I-ER-Fu NPs showed potentials as an integrated platform for the radiotheranostics of NSCLC.

Achiral Solvent Inversed Helical Pathway and Cosolvent Controlled Excited-State "Majority Rule" in Enantiomeric Dansulfonamide Assemblies

Achiral solvents are commonly utilized to induce the self-assembly of chiral molecules. This study demonstrates that achiral solvents can trigger helicity inversion in the assemblies of dansyl amphiphiles and control the excited-state "majority rule" in assemblies composed of pure enantiomers, through variation of the cosolvent ratio. Specifically, enantiomers of dansyl amphiphiles self-assemble into helical structures with opposite handedness in methanol (MeOH) and acetonitrile (MeCN), together with inversed circular dichroism and circularly polarized luminescence (CPL) signals. When a mixture of MeOH and MeCN is employed, the achiral cosolvents collectively affect the CPL of the assemblies in a way similar to that of "mixed enantiomers". The dominant cosolvent governs the CPL signal. As the cosolvent composition shifts from pure MeCN to MeOH, the CPL signals undergo a significant inversion and amplification, with two maxima observed at ≈20% MeOH and 20% MeCN. This study deepens the comprehension of how achiral solvents modulate helical nanostructures and their excited-state chiroptical properties.

Antimicrobial peptide mimetic minimalistic approach leads to very short peptide amphiphiles-gold nanostructures for potent antibacterial activity

Strategically controlling concentrations of lipid-conjugated L-tryptophan (vsPA) guides the self-assembly of nanostructures, transitioning from nanorods to fibres and culminating in spherical shapes. The resulting Peptide-Au hybrids, exhibiting size-controlled 1D, 2D, and 3D nanostructures, show potential in antibacterial applications. Their high biocompatibility, favourable surface area-to-volume ratio, and plasmonic properties contribute to their effectiveness against clinically relevant bacteria. This controlled approach not only yields diverse nanostructures but also holds promise for applications in antibacterial therapeutics.

Self-assembling biomolecules for biosensor applications

Molecular self-assembly has received considerable attention in biomedical fields as a simple and effective method for developing biomolecular nanostructures. Self-assembled nanostructures can exhibit high binding affinity and selectivity by displaying multiple ligands/receptors on their surface. In addition, the use of supramolecular structure change upon binding is an intriguing approach to generate binding signal. Therefore, many self-assembled nanostructure-based biosensors have been developed over the past decades, using various biomolecules (e.g., peptides, DNA, RNA, lipids) and their combinations with non-biological substances. In this review, we provide an overview of recent developments in the design and fabrication of self-assembling biomolecules for biosensing. Furthermore, we discuss representative electrochemical biosensing platforms which convert the biochemical reactions of those biomolecules into electrical signals (e.g., voltage, ampere, potential difference, impedance) to contribute to detect targets. This paper also highlights the successful outcomes of self-assembling biomolecules in biosensor applications and discusses the challenges that this promising technology needs to overcome for more widespread use.

Hierarchical Nano-Electrocatalytic Reactor for High Performance Polysulfides Redox Flow Batteries

The aqueous polysulfides is an important Earth-abundant and multielectron redox couple to construct high capacity density and low-cost aqueous redox flow batteries (RFB) ; nevertheless, the sluggish conversion and kinetic behavior of S2-/Sx2- result in a low power density output and poor active material utilizations. Herein, we present nanoconfined self-assembled ordered hierarchical porous Co and N codoped carbon (OHP-Co/NC) as an electrocatalytic reactor to enhance the mass transfer and redox activity of aqueous polysulfides. Finite element method simulation proves that the OHP-Co/NC with interconnected macropores and mesopores exhibits an enhanced mass transfer and delivers a larger redox electrolyte utilization of 50.1% compared to 23.3% of conventional Co/NC. Notably, the OHP-Co/NC obtained at 850 °C delivers the smallest redox peak potential difference (ΔE = 99 mV). Comparison studies of in operando Raman for aqueous polysulfides in the redox electrolyte and in situ electrochemical Raman on the single OHP-Co/NC particle for the adsorbed polysulfides were carried out. And it confirms that the OHP-Co/NC-850 catalyst has a strong adsorption of S42- and can retard the strong disproportionation and hydrolysis behavior of polysulfides on the electrocatalyst interface. Therefore, the polysulfide/ferrocyanide RFB with an OHP-Co/NC-850 based membrane-electrode assembly (MEA) exhibited a high power density of 110 mW cm-2, as well as a steady capacity retention over 99.7% in 300 cycles.

Tools to enable the study and translation of supramolecular amphiphiles

This tutorial review focuses on providing a summary of the key techniques used for the characterisation of supramolecular amphiphiles and their self-assembled aggregates; from the understanding of low-level molecular interactions, to materials analysis, use of data to support computer-aided molecular design and finally, the translation of this class of compounds for real world application, specifically within the clinical setting. We highlight the common methodologies used for the study of traditional amphiphiles and build to provide specific examples that enable the study of specialist supramolecular systems. This includes the use of nuclear magnetic resonance spectroscopy, mass spectrometry, X-ray scattering techniques (small- and wide-angle X-ray scattering and single crystal X-ray diffraction), critical aggregation (or micelle) concentration determination methodologies, machine learning, and various microscopy techniques. Furthermore, this review provides guidance for working with supramolecular amphiphiles in in vitro and in vivo settings, as well as the use of accessible software programs, to facilitate screening and selection of druggable molecules. Each section provides: a methodology overview - information that may be derived from the use of the methodology described; a case study - examples for the application of these methodologies; and a summary section - providing methodology specific benefits, limitations and future applications.

Advancements in Biosensors Based on the Assembles of Small Organic Molecules and Peptides

Over the past few decades, molecular self-assembly has witnessed tremendous progress in a variety of biosensing and biomedical applications. In particular, self-assembled nanostructures of small organic molecules and peptides with intriguing characteristics (e.g., structure tailoring, facile processability, and excellent biocompatibility) have shown outstanding potential in the development of various biosensors. In this review, we introduced the unique properties of self-assembled nanostructures with small organic molecules and peptides for biosensing applications. We first discussed the applications of such nanostructures in electrochemical biosensors as electrode supports for enzymes and cells and as signal labels with a large number of electroactive units for signal amplification. Secondly, the utilization of fluorescent nanomaterials by self-assembled dyes or peptides was introduced. Thereinto, typical examples based on target-responsive aggregation-induced emission and decomposition-induced fluorescent enhancement were discussed. Finally, the applications of self-assembled nanomaterials in the colorimetric assays were summarized. We also briefly addressed the challenges and future prospects of biosensors based on self-assembled nanostructures.

Recent Advances in Functional Nanomaterials for Diagnostic and Sensing Using Self-Assembled Monolayers

Functional nanomaterials have attracted attention by producing different structures in any field. These materials have several potential applications, including medicine, electronics, and energy, which provide many unique properties. These nanostructures can be synthesized using various methods, including self-assembly, which can be used for the same applications. This unique nanomaterial is increasingly being used for biological detection due to its unique optical, electrical, and mechanical properties, which provide sensitive and specific sensors for detecting biomolecules such as DNA, RNA, and proteins. This review highlights recent advances in the field and discusses the fabrication and characterization of the corresponding materials, which can be further applied in optical, magnetic, electronic, and sensor fields.

Editorial for Special Issue: "Supramolecular Nanomaterials for Biomedical Application"

Since the discovery of supramolecular chemistry in 1987.

On the relationship between the properties of planar structures of non-ionic surfactants and their vesicular analogues - Niosomes

In recent years, the study of niosomes as nanocarriers alternative to liposomes has received increasing attention. In contrast to well-studied liposome membranes, many aspects of the behavior of analogous niosome bilayers have not been studied. This paper considers one of these aspects related to the communication between the physicochemical properties of planar and vesicular objects. We present the first results of comparative studies of Langmuir monolayers of binary and ternary (with cholesterol) mixtures of non-ionic surfactants based on sorbitan esters and niosomal structures assembled from the same materials. The Thin-Film Hydration (TFH) method in the gentle shaking version was used to produce the particles of large sizes, while small unilamellar high quality vesicles with a unimodal distribution of particles were prepared by TFH using ultrasonic treatment and extrusion. An analysis of the structural organization and phase state of monolayers based on compression isotherms and supplemented by thermodynamic calculations, as well as the results of determining the particle morphology, polarity and microviscosity of niosome shells, made it possible to obtain fundamental data on the intermolecular interactions of the components and their packing in shells and to relate these data to the properties of niosomes. This relationship can be used to optimize the composition of niosome membranes and predict the behavior of these vesicular systems. It was shown that cholesterol excess creates regions of bilayers with increased rigidity (like "lipid rafts"), which hinders the process of folding film fragments into small niosomes.

Antibacterial Host-Guest Intercalated LDH-Adorned Polyurethane for Accelerated Dermal Wound Healing

Curcumin has a limited clinical application because of its extremely poor accessibility. In the present study, improved curcumin bioavailability within a castor oil polyurethane/layered double hydroxide (LDH) wound cover was achieved by preparing a curcumin p-sulfonic acid calix[4]arene (SC4A) inclusion complex. Then, it was utilized to intercalate MgAl-layered double hydroxide (MgAl-LDH) nanosheets. The incorporation of the nanostructure into a PU/Cur-SC4A-LDH film provided bacteria-killing performance against both Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli bacteria. This finding is due to an increase in curcumin bioavailability in the PU matrix. Furthermore, all PU nanocomposites exhibited appropriate cytocompatibility based on an MTT assay. Mainly, the proliferation of L929 fibroblast cells in contact with the PU/Cur-SC4A-LDH sample was significantly further enhanced than that for other nanocomposites within 7 days. This observation can be related to the better availability of curcumin on the film's surface, which causes an improvement in the proliferation rate of cells. Regarding the histological results, the hematoxylin and eosin (H&E) images showed faster epidermal layer formation and a larger quantity of matured hair follicles for PU/Cur-SC4A-LDH-healed wounds in comparison with those for the negative control over a period of 28 days. Thus, this practical healing ability of the PU/Cur-SC4A-LDH nanocomposite makes it a promising candidate as a wound dressing film.

Rip it, stitch it, click it: A Chemist's guide to VLP manipulation

Viruses are some of nature's most ubiquitous self-assembled molecular containers. Evolutionary pressures have created some incredibly robust, thermally, and enzymatically resistant carriers to transport delicate genetic information safely. Virus-like particles (VLPs) are human-engineered non-infectious systems that inherit the parent virus' ability to self-assemble under controlled conditions while being non-infectious. VLPs and plant-based viral nanoparticles are becoming increasingly popular in medicine as their self-assembly properties are exploitable for applications ranging from diagnostic tools to targeted drug delivery. Understanding the basic structure and principles underlying the assembly of higher-order structures has allowed researchers to disassemble (rip it), reassemble (stitch it), and functionalize (click it) these systems on demand. This review focuses on the current toolbox of strategies developed to manipulate these systems by ripping, stitching, and clicking to create new technologies in the biomedical space.

Ruthenium-based antitumor drugs and delivery systems from monotherapy to combination therapy

Ruthenium complex is an important compound group for antitumor drug research and development. NAMI-A, KP1019, TLD1433 and other ruthenium complexes have entered clinical research. In recent years, the research on ruthenium antitumor drugs has not been limited to single chemotherapy drugs; other applications of ruthenium complexes have emerged such as in combination therapy. During the development of ruthenium complexes, drug delivery forms of ruthenium antitumor drugs have also evolved from single-molecule drugs to nanodrug delivery systems. The review summarizes the following aspects: (1) ruthenium complexes from monotherapy to combination therapy, including the development of single-molecule compounds, carrier nanomedicine, and self-assembly of carrier-free nanomedicine; (2) ruthenium complexes in the process of ADME in terms of absorption, distribution, metabolism and excretion; (3) the applications of ruthenium complexes in combination therapy, including photodynamic therapy (PDT), photothermal therapy (PTT), photoactivated chemotherapy (PACT), immunotherapy, and their combined application; (4) the future prospects of ruthenium-based antitumor drugs.

Highly efficient discrimination of cancer cells based on in situ-activated phosphorescence energy transfer for targeted cell imaging

Highly efficient discrimination between cancer cells and normal cells is full of challenges for precise diagnosis. Herein, we report an effective in situ-activated phosphorescence energy transfer supramolecular assembly constructed by a bromophenyl pyridine derivative (BPPY), cucurbit[8]uril (CB[8]), and rhodamine B-grafted hyaluronic acid (HAR) through noncovalent interaction. As compared with BPPY, CB[8] encapsulated two BPPY molecules, resulting in a biaxial pseudorotaxane supramolecular assembly showing purely organic room-temperature phosphorescence induced by macrocyclic confinement, which when further co-assembled with HAR, formed a multivalent supramolecular assembly with phosphorescence energy transfer. Benefitting from the targeting of hyaluronic acid and the cyclolactam ring ON-OFF reaction of HAR, such supramolecular assembly with an open ring presents red delayed fluorescence through phosphorescence energy transfer in cancer cells, while the assembly showed only green phosphorescence in normal cells, realizing highly efficient discrimination between cancer and normal cells. This supramolecular assembly is responsive to the physiological environment and provides a supramolecular platform for precise diagnosis.

Enzyme-mediated intratumoral self-assembly of nanotheranostics for enhanced imaging and tumor therapy

Enzyme-mediated intratumoral self-assembled (EMISA) nanotheranostics represent a new class of smart agents for combined imaging and therapy of cancer. Cancer cells overexpress various enzymes that are essential for high metabolism, fast proliferation, and tissue invasion and metastasis. By conjugating small molecules that contain an enzyme-specific cleavage site to appropriate chemical linkers, it is possible to induce self-assembly of nanostructures in tumor cells having the target enzyme. This approach of injecting small theranostic molecules that eventually become larger nanotheranostics in situ avoids some of the major limitations that are encountered when injecting larger, pre-assembled nanotheranostics. The advantage of EMISA nanotheranostics include the avoidance of nonspecific uptake and rapid clearance by phagocytic cells, increased cellular accumulation, reduced drug efflux and prolonged cellular exposure time, all of which lead to an amplified imaging signal and therapeutic efficacy. We review here the different approaches that can be used for preparing EMISA-based organic, inorganic, or organic/inorganic hybrid nanotheranostics based on noncovalent interactions and/or covalent bonding. Imaging examples are shown for fluorescence imaging, nuclear imaging, photoacoustic imaging, Raman imaging, computed tomography imaging, bioluminescent imaging, and magnetic resonance imaging. This article is categorized under: Diagnostic Tools > In Vivo Nanodiagnostics and Imaging Biology-Inspired Nanomaterials > Peptide-Based Structures.

Co-Assembly Induced Solid-State Stacking Transformation in Amino Acid-Based Crystals with Enhanced Physical Properties

The physical characteristics of supramolecular assemblies composed of small building blocks are dictated by molecular packing patterns in the solid-state. Yet, the structure-property correlation is still not fully understood. Herein, we report the unexpected cofacial to herringbone stacking transformation of a small aromatic bipyridine through co-assembly with acetylated glutamic acid. The unique solid-state structural transformation results in enhanced physical properties of the supramolecular organizations. The co-assembly methodology was further expanded to obtain diverse molecular packings by different bipyridine and acetylated amino acid derivatives. This study presents a feasible co-assembly approach to achieve the solid-state stacking transformation of supramolecular organization and opens up new opportunities to further explore the relationship between molecular arrangement and properties of supramolecular assemblies by crystal engineering.

Current State-of-the-Art and New Trends in Self-Assembled Nanocarriers as Drug Delivery Systems

Self-assembled nanocarrier drug delivery has received profuse attention in the field of diagnosis and treatment of diseases. These carriers have proved that serious life-threatening diseases can be eliminated evidently by virtue of their characteristic design and features. This review is aimed at systematically presenting the research and advances in the field of self-assembled nanocarriers such as polymeric nanoparticles, dendrimers, liposomes, inorganic nanocarriers, solid lipid nanoparticles, polymerosomes, micellar systems, niosomes, and some other nanoparticles. The self-assembled delivery of nanocarriers has been developed in recent years for targeting diseases. Some of the innovative attempts with regard to prolonging drug action, improving bioavailability, avoiding drug resistance, enhancing cellular uptake, and so on have been discussed. The discussion about various delivery systems included the investigation conducted at the preliminary stage, i.e., preclinical trials and assessment of safety. The clinical studies of some of the recently developed self-assembled products are currently at the clinical trial phase or FDA approved.

Structural and photoactive properties of self-assembled peptide-based nanostructures and their optical bioapplication in food analysis

BACKGROUND

Food processing plays an important role in the modern industry because food quality and security directly affect human health, life safety, and social and economic development. Accurate, efficient, and sensitive detection technology is the basis for ensuring food quality and security. Optosensor-based technology with the advantage of fast and visual real-time detection can be used to detect pesticides, metal ions, antibiotics, and nutrients in food. As excellent optical centres, self-assembled peptide-based nanostructures possess attractive advantages, such as simple preparation methods, controllable morphology, tunable functionality, and inherent biocompatibility.

AIM OF REVIEW

Self-assembled peptide nanostructures with good fabrication yield, stability, dispersity in a complex sample matrix, biocompatibility, and environmental friendliness are ideal development goals in the future. Owing to its flexible and unique optical properties, some short peptide self-assemblies can possibly be used to achieve the purpose of rapid and sensitive detection of composition in food, agriculture, and the environment, expanding the understanding and application of peptide-based optics in analytical chemistry.

KEY SCIENTIFIC CONCEPT OF REVIEW

The self-assembly process of peptides is driven by noncovalent interactions, including hydrogen bonding, electrostatic interactions, hydrophobic interactions, and π-π stacking, which are the key factors for obtaining stable self-assembled peptide nanostructures with peptides serving as assembly units. Controllable morphology of self-assembled peptide nanostructures can be achieved through adjustment in the type, concentration, and pH of organic solvents and peptides. The highly ordered nanostructures formed by the self-assembly of peptides have been proven to be novel biological structures and can be used for the construction of optosensing platforms in biological or other systems. Optosensing platforms make use of signal changes, including optical signals and electrical signals caused by specific reactions between analytes and active substances, to determine the content or concentration of an analyte.

In situ construction of a cobalt oxyhydroxide loaded pyrene-based fluorescent organic nanoprobe for bioimaging of endogenous ascorbic acid in living cells

A novel in situ strategy to fabricate CoOOH nanoflake-loaded pyrene-based FONs (denoted as PyFONs@CoOOH) as proof-of-concept of a sensing platform for direct bioimaging of endogenous AA in living cells.

A four-in-one pure nanomedicine for synergistic multi-target therapy against breast cancer

Designing a multi-target nanomedicine without a carrier is pivotal for successful cancer nanotherapy. This study details a novel four-in-one RRX/BMS/CA4/PTX nanomedicine by simple nanoprecipitation. In this multi-target pure nanomedicine, paclitaxel (PTX) causes the immunogenic cell death of 4T1 tumour cells and the differentiation of marrow-derived suppressor cells (MDSCs) into dendritic cells (DCs) at low dose; repertaxin (RRX) selectively depletes cancer stem cells (CSCs) that are not killed by paclitaxel to inhibit lung metastasis from the breast; BMS-1 blocks the PD-1/PD-L1 pathway for proliferating effector T cells; and combretastatin A4 (CA4) targets tumour microvessels to cut off the blood supply in the tumour microenvironment. The synergy of multi-target therapies results in excellent antitumour effects. The tumour inhibition rate of 4T1 tumours is 92.5%, and the lung metastasis suppression rate exceeds 90%; no relapse is observed at 46 days after the treatment endpoint, and the survival of 50% of mice is prolonged by 95 days. Due to the low dose of PTX administration, the systemic toxicity of the RRX/BMS/CA4/PTX nanomedicine is not found. Our results suggest a strategy for designing multi-target pure nanomedicines with simple construction and efficacious therapeutic responses that present potential for clinical transformation.

Self-assembling, structure and nonlinear optical properties of fluorescent organic nanoparticles in water

Owing to their intense emission, low toxicity and solubility in aqueous medium, fluorescent organic nanoparticles (FONs) have emerged as promising alternatives to inorganic ones for the realization of exogenous probes for bioimaging applications. However, the intimate structure of FONs in solution, as well as the role played by intermolecular interactions on their optical properties, remains challenging to study. Following a recent Second-Harmonic Scattering (SHS) investigation led by two of us [Daniel et al., ACS Photonics, 2015, 2, 1209], we report herein a computational study of the structural organization and second-order nonlinear optical (NLO) properties of FONs based on dipolar chromophores incorporating a hydrophobic triphenylamine electron-donating unit and a slightly hydrophilic aldehyde electron-withdrawing unit at their extremities. Molecular dynamics simulations of the FON formation in water are associated with quantum chemical calculations, to provide insight into the molecular aggregation process, the molecular orientation of the dipolar dyes within the nanoparticles, and the dynamical behavior of their NLO properties. Moreover, the impact of intermolecular interactions on the NLO responses of the FONs is investigated by employing the tight-binding version of the recently developed simplified time-dependent density functional theory (sTD-DFT) approach, allowing the all-atom quantum mechanics treatment of nanoparticles.

Preparation of Near-Infrared/Photoacoustic Dual-Mode Imaging and Photothermal/Chemo Synergistic Theranostic Nanoparticles and Their Imaging and Treating of Hepatic Carcinoma

At present, the clinical diagnosis of and treatment methods for hepatic carcinoma still fail to fully meet the needs of patients. The integrated theranostic system, in which functional materials are used to load different active molecules, created a new developmental direction for the combination treatment of hepatic carcinoma, realizing the synchronization of diagnosis and treatment. In this study, polydopamine (PDA), which has the functions of self-assembly, encapsulation, photothermal conversion, and photoacoustic interaction, was used as the carrier material. The IR780, a near-infrared fluorescence imaging (NIFI), photoacoustic imaging (PAI), and photothermal therapy (PTT) agent, and paclitaxel (PTX), a broad-spectrum chemotherapy drug, were selected to build the NIF/PA dual-mode imaging and PTT/chemo synergistic theranostic nanoparticles (DIST NPs). The DIST NPs have a 103.4 ± 13.3 nm particle size, a weak negative charge on the surface, good colloidal stability, slow and controlled drug release, and high photothermal conversion ability. The experiments results showed that the DIST NPs have a long circulation in vivo, high bioavailability, high biocompatibility, and low effective dose. DIST NPs showed an excellent NIFI/PAI dual-mode imaging and significant synergistic antitumor effect in hepatic carcinoma models. DIST NPs met the initial design requirements. A set of fast and low-cost preparation methods was established. This study provides an experimental basis for the development of new clinical theranostic methods for hepatic carcinoma.

Hyaluronic acid-based nanogels derived from multicomponent self-assembly for imaging-guided chemo-photodynamic cancer therapy

Multifunctional theranostic nanoplatforms integrated of imaging function, multi-modality therapy, stimuli-responsiveness, and targeted delivery are of highly desirable attributes in achieving precise medicine. However, preparation of multifunctional nanoplatforms often involves laborious, multiple steps and inevitably utilizes low-biocompatible or non-functional components. Herein we report a facile, one-step self-assembly strategy to fabricate hyaluronic acid (HA)-based multifunctional tumor theranostic nanoplatform by employing magnetic resonance imaging (MRI) agent Mn2+ as a reversible crosslink agent for histidine-grafted HA, along with simultaneously loading chemotherapeutic agent doxorubicin hydrochloride (DOX) and photodynamic therapy agent chlorin e6, to realize MRI-guided targeted chemo-photodynamic cancer therapy. The targeted delivery and stimuli-responsive payload release were demonstrated in vitro and in vivo. Furthermore, the combined chemo-photodynamic therapy of the nanoassembly dramatically improved the cancer therapeutic outcome, in comparison with that of free DOX and nanoplatform solely loaded DOX in a melanoma bearing mice. Our one step assemble strategy is of great potential in clinic transformation.

A novel drug delivery system -- Drug crystallization encapsulated liquid crystal emulsion

Liquid crystals (LCs) are widely used for drug delivery due to their controlled and sustained drug release properties. In this paper, drug crystallization encapsulated liquid crystal emulsion, a novel drug delivery system, was proposed. The lamellar liquid crystals formed by hydrogenated lecithin, which are similar to the skin stratum corneum lipid structure, are adopted as the drug carrier to encapsulate non-steroidal anti-inflammatory drugs (NSAIDs). As the model drug, ketoprofen exists in the hydrophobic core of emulsion as a drug crystal when squalane is used as the oil phase. The microstructure, sustained drug release behaviors, physicochemical property and biocompatibility of the system were examined by polarized light microscopy, rheological measurements, differential scanning calorimetry, X-ray diffraction, small-angle X-ray scattering, in vitro release study, and in vitro cellular cytotoxicity assay. The results have shown that the novel system lowers the drug crystal melting point and improves the thermal stability of liquid crystal structure. Besides, the excellent biocompatibility and sustained release property through the additional dissolution step of drug crystal show its application potentials in the topical cosmeceuticals. The results will also be helpful for in-depth understanding of the physical state of encapsulated drug in the liquid crystal carrier systems.

Self-assembly of diclofenac prodrug into nanomicelles for enhancing the anti-inflammatory activity

Non-steroidal anti-inflammatory drugs (NSAIDs) are widely prescribed for the treatment of various types of inflammatory conditions. Diclofenac is a very common NSAID that is utilized to relieve pain and reduce fever and, most importantly, inflammation. However, it suffers from low water solubility and a low dissolution profile. Therefore, we aim to develop a new drug delivery system based on the synthesis of amphiphilic structures that are capable of self assembling into nano-micelles which will be a water-soluble delivery system for the diclofenac. The amphiphilic structure consists of a hydrophilic moiety of triethylene glycol (TEG), polyethylene glycol PEG 400, or PEG 600 linked with the hydrophobic drug diclofenac through an ester linkage. The diclofenac derivatives were successfully synthesized as confirmed by nuclear magnetic resonance. Moreover, the formation of the micellar structure of the synthesized amphiphilic derivatives was confirmed by atomic force microscopy obtaining a spherical shape of the micelles with average diameters of 200 nm for Dic-PEG400-Dic, and 110 nm for Dic-PEG600-Dic. The critical micelle concentration has been determined as 2.7 × 10^-3 mg mL^-1 for Dic-PEG400-Dic, and 1 × 10^-4 mg mL^-1 for Dic-PEG600-Dic. The in vitro diclofenac release profile by esterase enzyme was conducted and showed almost complete conversion to free diclofenac within 35 h in the case of Dic-PEG400-Dic micelles and more than 85% of Dic-PEG600-Dic micelles. Then the anti-inflammatory activity was determined by testing the TNF-α production in LPS-stimulated Balb/c mice. Diclofenac micelles significantly suppressed TNF-α production after a 5 mg kg^-1 dose was given. The developed micelles showed TNF-α inhibition up to 87.4% and 84% after 48 hours of treatment in the case of Dic-PEG400-Dic and Dic-PEG600-Dic micelles respectively in comparison to 42.3% in the case of diclofenac alone. Dic-PEG400-Dic micelles showed the most potent anti-inflammatory activity with improved TNF-α suppression through time progress. Therefore, the developed nano-micelles provide a facile synthetic approach to enhance diclofenac water solubility, improve the anti-inflammatory effect and achieve a sustained release profile to get better patient compliance.

Amphiphilic BODIPY-based nanoparticles as "light-up" fluorescent probe for PAEs detection by an aggregation/disaggregation approach

Phthalic acid eaters (PAEs) play the role of plasticizer and have been widely used in the industrial and plastic production process. But due to not chemically bound in the polymeric matrix, PAEs can be easily released directly and/or indirectly into the environment, and pose a threat the ecosystem and human health. Small-molecule self-assembled nanoparticles have drawn more and more attention due to advantages of precise molecular structure, biocompatibility, great diversity, and tunability in optical properties and functionalities. Here we report the use of disaggregation-induced emission (DIE) based supramolecular assembly to design organic nanoprobe for detection PAEs. In the water solution, the designed small organic fluorophore AJ-1 was aggregated via noncovalent forces to form fluorescence off nanoparticles, but in the presence of PAEs, they disaggregated and produced a clear light-up fluorescent signal. The detection of PAEs with selectivity, sensitivity and rapid response were further achieved. The experiment of recovery of PAEs in real-water sample illustrated the practicability of probe AJ-1 in real-world applications. Besides, cellular uptake assay suggested that AJ-1 could pass through membrane and gather in the cytoplasm.

Deciphering the evolution of supramolecular nanofibers in solution and solid-state: a combined microscopic and spectroscopic approach

Supramolecular self-assembly of small organic molecules has emerged as a powerful tool to construct well-defined micro- and nanoarchitecture through fine-tuning a range of intermolecular interactions. The size, shape, and optical properties of these nanostructures largely depend on the specific assembly of the molecular building units, temperature and polarity of the medium, and external stimuli. The engineering of supramolecular self-assembled nanostructures with morphology-dependent tunable emission is in high demand due to the promising scope in nanodevices and molecular machines. However, probing the evolution of molecular aggregates from the solution and directing the self-assembly process in a pre-defined fashion are challenging. In the present study, we have deciphered the sequential evolution of supramolecular nanofibers from solution to spherical and oblong-shaped nanoparticles through the variation of solvent polarity, tuning the hydrophobic-hydrophilic interactions. An intriguing case of molecular self-assembly has been elucidated employing a newly designed π-conjugated thiophene derivative (TPAn) through a combination of steady-state absorption, emission measurements, fluorescence correlation spectroscopy (FCS), and electron microscopy. The FCS analysis and microscopy results revealed that the small-sized nanofibers in the dispersion further agglomerated upon solvent evaporation, resulting in a network of nanofibers. Stimuli-responsive reversible interconversion between a network of nanofibers and spherical nanoaggregates was probed both in dispersion and solvent-evaporated state. The evolution of organic nanofibers and a subtle control over the self-assembly process demonstrated in the current investigation provide a general paradigm to correlate the size, shape, and emission properties of fluorescent molecular aggregates in complex heterogeneous media, including a human cell.

Pillararene-based self-assemblies for electrochemical biosensors

The ingenious design and synthesis of novel macrocycles bring out renewed vigor of supramolecular chemistry in the past decade. As an intriguing class of macrocycles, pillararene and pillararene-based functional materials that are constructed through the noncovalent bond self-assembly approach have been undergoing a rapid growth, benefiting from their unique structures and physiochemical properties. This review elaborates recent significant advances of electrochemical studies based on pillararene systems. Fundamental electrochemical behavior of pillar[n]arene[m]quinone and pillararene-based self-assemblies as well as their applications in electrochemical biosensors are highlighted. In addition, the advantages and functions of pillararene self-assembly systems resulted from the unique molecular architectures are analyzed. Finally, current challenges and future development tendency in this burgeoning field are discussed from the viewpoint of both fundamental research and applications. Overall, this review not only manifests the main development vein of pillararene-based electrochemical systems, but also conquers a solid foundation for their further bioelectrochemical applications.

Single Small Molecule-Assembled Mitochondria Targeting Nanofibers for Enhanced Photodynamic Cancer Therapy in Vivo

Photodynamic therapy (PDT) has emerged as an attractive alternative in cancer therapy, but its therapeutic effects are limited by the nonselective subcellular localization and poor intratumoral retention of small-molecule photosensitizes. Here a fiber-forming nanophotosensitizer (PQC NF) that is composed of mitochondria targeting small molecules of amphiphilicity is reported. Harnessing the specific mitochondria targeting, the light-activated PQC NFs produce approximately 110-fold higher amount of reactive oxygen species (ROS) in cells than free photosensitizers and can dramatically induce mitochondrial disruption to trigger intense apoptosis, showing 20-50 times better in vitro anticancer potency than traditional photosensitizers. As fiber-shaped nanomaterials, PQC NFs also demonstrated a long-term retention in tumor sites, solving the challenge of rapid clearance of small-molecule photosensitizers from tumors. With these advantages, PQC NFs achieve a 100% complete cure rate in both subcutaneous and orthotopic oral cancer models with the administration of only a single dose. This type of single small molecule-assembled mitochondria targeting nanofibers offer an advantageous strategy to improve the in vivo therapeutic effects of conventional PDT.

Recent research progress in the construction of active free radical nanoreactors and their applications in photodynamic therapy

Photodynamic therapy is the most important treatment strategy in free radical therapy. However, tumor microenvironment hypoxia is a key obstacle in PDT. In order to overcome this obstacle, the strategy of in situ production of O₂/radicals by catalytic reaction in solid tumors was proposed. In recent years, it has been found that there are many oxygen-independent carbon-based free radicals that can generate toxic active free radicals under laser irradiation and lead to tumor cell death. Based on the rational design of multifunctional nano-medicine, the active free radical nano-generator has opened up a new way for the highly developed nanotechnology and tumor cooperative therapy to improve the therapeutic effect. In this paper, the research status of active free radical nano-generators, especially reactive oxygen species, including the construction mechanism of active free radical nanomaterials, is reviewed and the application of free radical nano-generators in tumor therapy is emphasized.

Innovative Synthetic Procedures for Luminogens Showing Aggregation-Induced Emission

As a consequence of their intrinsic advantageous properties, luminogens that show aggregation-induced emission (AIEgens) have received increasing global interest for a wide range of applications. Whereas general synthetic methods towards AIEgens largely rely on tedious procedures and limited reaction types, various innovative synthetic methods have now emerged as complementary, and even alternative, strategies. In this Review, we systematically highlight advancements made in metal-catalyzed functionalization and metal-free-promoted pathways for the construction of AIEgens over the past five years, and briefly illustrate new perspectives in this area. The development of innovative synthetic procedures will enable the facile synthesis of AIEgens with great structural diversity for multifunctional applications.

Recent advances in the fabrication and bio-medical applications of self-assembled dipeptide nanostructures

Molecular self-assembly is a widespread natural phenomenon and has inspired several researchers to synthesize a compendium of nano/microstructures with widespread applications. Biomolecules like proteins, peptides and lipids are used as building blocks to fabricate various nanomaterials. Supramolecular peptide self-assembly continue to play a significant role in forming diverse nanostructures with numerous biomedical applications; however, dipeptides offer distinctive supremacy in their ability to self-assemble and produce a variety of nanostructures. Though several reviews have articulated the progress in the field of longer peptides or polymers and their self-assembling behavior, there is a paucity of reviews or literature covering the emerging field of dipeptide-based nanostructures. In this review, our goal is to present the recent advancements in dipeptide-based nanostructures with their potential applications.

Eu3+/Tb3+ supramolecular assembly hybrids for ultrasensitive and ratiometric detection of anthrax spore biomarker in water solution and actual spore samples

Rare earth (RE) complexes have found a variety of applications in materials science and biomedicine because of their unique luminescence properties. However, the poor stability and solubility in water of multicomponent RE assemblies significantly limit their practical applications. We rationally designed and developed a novel Eu³⁺/Tb³⁺ supramolecular assembly hybrids (Eu/Tb-SAH) by supramolecular host-guest recognition and coordination recognition with the excellent characteristics of water dispersion stability, biocompatibility and luminous properties. As anthrax spore biomarker, 2,6-pyridinedicarboxylic acid (DPA) can coordinate with Tb³⁺ and sensitize Tb³⁺, resulting in a proportional change of fluorescence intensity and lifetime on the ms timescales, thereby realizing rapid and sensitive detection of DPA in water media or actual spores. To confirm our prediction, accurate and selective detection of DPA was achieved with Eu/Tb-SAH as a nanoprobe through steady-state ratiometric fluorescence and time-resolved technology, of which the limit of detection (LOD) are 27.3 nM and 1.06 nM, respectively. This was obviously lower than the amount of anthrax spores infecting the human body (60 μM). Besides, the filter paper was used to carry out visual detection of DPA and read the corresponding data through smart phones. This work paves a new way to fabricate luminescent RE nanomaterials and provides new ideas for the design of ratiometic lifetime imaging biosensors in the meantime.

Rational collaborative ablation of bacterial biofilms ignited by physical cavitation and concurrent deep antibiotic release

Bacteria biofilm has extracellular polymeric substances to protect bacteria from external threats, which is a stubborn problem for human health. Herein, a kind of gasifiable nanodroplet is fabricated to ablate Staphylococcus aureus (S. aureus) biofilm. Upon NIR pulsed laser irradiation, the nanodroplets can gasify to generate destructive gas shockwave, which further potentiates initial acoustic cavitation effect, thus synergistically disrupting the protective biofilm and killing resident bacteria. More importantly, the gasification can further promote antibiotic release in deep biofilm for residual bacteria eradication. The nanodroplets not only exhibit deep biofilm penetration capacity and high potency to ablate biofilms, but also good biocompatibility without detectable side effects. In vivo mouse implant model indicates that the nanodroplets can accumulate at the S. aureus infected implant sites. Upon pulsed laser treatment, the nanodroplets efficiently eradicate bacteria biofilm in implanted catheter by synergistic contribution of gas shockwave-enhanced cavitation and deep antibiotic release. Current phase changeable nanodroplets with synergistic physical and chemical therapeutic modalities are promising to combat complex bacterial biofilms with drug resistance, which provides an alternative visual angle for biofilm inhibition in biomedicine.

Self-Assembled Organic Nanomaterials for Drug Delivery, Bioimaging, and Cancer Therapy

Over the past few decades, tremendous progress has been made in the development of engineering nanomaterials, which opened new horizons in the field of diagnosis and treatment of various diseases. In particular, self-assembled organic nanomaterials with intriguing features including delicate structure tailoring, facile processability, low cost, and excellent biocompatibility have shown outstanding potential in biomedical applications because of the enhanced permeability and retention (EPR) effect and multifunctional properties. In this review, we briefly introduce distinctive merits of self-assembled organic nanomaterials for biomedical applications. The main focus will be placed on summarizing recent advances in self-assembled organic nanomedicine for drug delivery, bioimaging, and cancer phototherapy, followed by highlighting a critical perspective on further development of self-assembled organic nanomaterials for future clinical translation. We believe that the above themes will appeal to researchers from different fields, including material, chemical, and biological sciences, as well as pharmaceutics.

Supramolecular combination chemotherapy: a pH-responsive co-encapsulation drug delivery system

Most cancer chemotherapy regimens rely on the use of two or more chemotherapeutic agents. However, achieving the best possible dosing of the individual drugs can be challenging due to differences in metabolism, uptake, and clearance among other factors. Here we describe a supramolecular strategy for achieving drug delivery in which the loading ratio of two active components is easily defined. Specifically, we report the formation of aggregates comprised of self-assembled amphiphiles between carboxylatopillar[6]arene (CP6A) and an oxaliplatin (OX)-type Pt(iv) prodrug (PtC10). The association constant (K a) for the underlying host-guest interaction at pH 7.4 ((1.16 ± 0.03) × 104 M-1) is an order of magnitude higher than at pH 5.0 ((1.73 ± 0.15) × 103 M-1). A second chemotherapeutic, doxorubicin (DOX), may be encapsulated in the resulting vesicles (PtC10⊂CP6A) to give a supramolecular combination chemotherapeutic system DOX@PtC10⊂CP6A. Drug release studies served to confirm that PtC10 and DOX are released in acidic environments. Support for a synergistic antiproliferative effect relative to PtC10 + DOX came from cellular studies of DOX@PtC10⊂CP6A using the human liver hepatocellular carcinoma (HepG-2) cell line. In vivo studies revealed that DOX@PtC10⊂CP6A is not only able to retard tumor growth efficiently but also reduce drug-related toxic side effects in BALB/c nude mice bearing HepG-2 subcutaneous tumor xenografts. These favorable findings are attributed to the formation of a ternary complex that benefits from an enhanced permeability and retention (EPR) effect in vivo while allowing for the pH-based release of PtC10 and DOX at the tumor site.