Heterojunction Photocatalysts

Unveiling the photocatalytic marvels: Recent advances in solar heterojunctions for environmental remediation and energy harvesting

In the quest for effective solutions to address Environ. Pollut. and meet the escalating energy demands, heterojunction photocatalysts have emerged as a captivating and versatile technology. These photocatalysts have garnered significant interest due to their wide-ranging applications, including wastewater treatment, air purification, CO2 capture, and hydrogen generation via water splitting. This technique harnesses the power of semiconductors, which are activated under light illumination, providing the necessary energy for catalytic reactions. With visible light constituting a substantial portion (46%) of the solar spectrum, the development of visible-light-driven semiconductors has become imperative. Heterojunction photocatalysts offer a promising strategy to overcome the limitations associated with activating semiconductors under visible light. In this comprehensive review, we present the recent advancements in the field of photocatalytic degradation of contaminants across diverse media, as well as the remarkable progress made in renewable energy production. Moreover, we delve into the crucial role played by various operating parameters in influencing the photocatalytic performance of heterojunction systems. Finally, we address emerging challenges and propose novel perspectives to provide valuable insights for future advancements in this dynamic research domain. By unraveling the potential of heterojunction photocatalysts, this review contributes to the broader understanding of their applications and paves the way for exciting avenues of exploration and innovation.

Stable loading of MOF-derived carbon skeleton encapsulated Ni and BiOBr on carbonized cellulose fibers for fabricating high-performance and recyclable photocatalytic paper

The highly dispersed small-size metal co-catalysts can effectively improve the photocatalytic efficiency of semiconductor photocatalysts by separating photogenerated electrons and enriching active sites. However, this system tends to aggregate in the absence of carrier, resulting in the decrease of active sites. Here, MOF-derived carbon skeleton (MDCS) encapsulated Ni nanoparticles (Ni@MDCS) and BiOBr was loaded onto carbonized cellulose fibers (CCF) with the help of polydopamine (PDA) to construct high-performance and recyclable photocatalytic paper for photocatalytic degradation of organic dyes in water. The characterization results showed that MDCS promoted good dispersion of Ni nanoparticles and provided sufficient active sites. And Ni@MDCS as a co-catalyst accelerated the separation of photogenerated carriers in BiOBr. The PDA improved the loading state of Ni@MDCS on CCF and converted into N-doped C in the carbonization process for further increasing the transfer efficiency of photogenerated electrons. In the composite paper, the stable loading of Ni@MDCS/BiOBr hybrid on CCF improved the dispersion and reusability of photocatalyst. The degradation rate of rhodamine B on CCF/PDA-C/Ni@MDCS/BiOBr paper was as high as 94.6 % after 60 min visible light irradiation, which was about 2.5 times higher than that of CCF/BiOBr paper. During 10 cycles, CCF/PDA-C/Ni@MDCS/BiOBr paper maintained high photocatalytic efficiency and good structural stability. This study provides a new way for developing high-performance and recyclable photocatalytic paper.

Synergistic effect of Na doping and CoSe2 cocatalyst for enhanced photocatalytic hydrogen evolution performance of ZnIn2S4

Element doping has been demonstrated as a useful strategy to regulate the band gap and electronic structure of photocatalyst for improving photocatalytic activity. Herein, ZnIn2S4 (ZIS) nanosheets were doped with alkali metal ions (Li+, Na+ or K+) by a simple solution method. Experimental characterizations reveal that alkali metal ions doping reduce the band gap, raise the conduction band position, and improve surface hydrophilicity of ZIS. In addition, theoretical calculations show that Na doping increases the electron density at valence band maximum and surrounding S atom, which is conducive to produce more electrons and effective utilization of electrons, respectively. Benefited from above factors, Na-doped ZIS (Na-ZIS) shows the highest photocatalytic hydrogen evolution performance. Furthermore, CoSe2 cocatalyst is loaded on the surface of Na-ZIS (CS/Na-ZIS), which further improve the charge separation and prolong the lifetime of charges. As a result, the optimized CS/Na-ZIS shows a H2 evolution rate of 4525 μmol·g-1·h-1 with an apparent quantum efficiency of 27.5 % at 420 nm, which are much higher than that of pure ZIS. This study provides an in-depth understanding of the synergistic effect of Na doping and CoSe2 cocatalyst in ameliorating photocatalytic activity.

TiO2-based photocatalysts from type-II to S-scheme heterojunction and their applications

Photocatalysis is a promising sustainable technology to remove organic pollution and convert solar energy into chemical energy. Titanium dioxide has drawn extensive attention in this field owing to its high activity under UV light, good chemical stability, large availability, low price and low toxicity. However, the poor quantum efficiency derived from fast electron/hole recombination, the limited utilization of sunlight, and a weak reducing ability still hinder its practical application. Among the modification strategies of TiO2 to enhance its performance, the construction of heterojunctions with other semiconductors is a powerful and versatile way to maximise the separation of photogenerated charge carriers and steer their transport toward enhanced efficiency and selectivity. Here, the research progress and current status of TiO2 modification are reviewed, focusing on heterojunctions. A rapid evolution of the understanding of the different charge transfer mechanisms is witnessed from traditional type II to the recently conceptualised S-scheme. Particular attention is paid to different synthetic approaches and interface engineering methods designed to improve and control the interfacial charge transfer, and several cases of TiO2 heterostructures with metal oxides, metal sulfides and carbon nitride are discussed. The application hotspots of TiO2-based photocatalysts are summarized, including hydrogen generation by water splitting, solar fuel production by CO2 conversion, and the degradation of organic water pollutants. Hints about less studied and emerging processes are also provided. Finally, the main issues and challenges related to the sustainability and scalability of photocatalytic technologies in view of their commercialization are highlighted, outlining future directions of development.

Heterojunction semiconductor nanocatalysts as cancer theranostics

Cancer nanotechnology is a promising area of cross-disciplinary research aiming to develop facile, effective, and noninvasive strategies to improve cancer diagnosis and treatment. Catalytic therapy based on exogenous stimulus-responsive semiconductor nanomaterials has shown its potential to address the challenges under the most global medical needs. Semiconductor nanocatalytic therapy is usually triggered by the catalytic action of hot electrons and holes during local redox reactions within the tumor, which represent the response of nontoxic semiconductor nanocatalysts to pertinent internal or external stimuli. However, careful architecture design of semiconductor nanocatalysts has been the major focus since the catalytic efficiency is often limited by facile hot electron/hole recombination. Addressing these challenges is vital for the progress of cancer catalytic therapy. In recent years, diverse strategies have been developed, with heterojunctions emerging as a prominent and extensively explored method. The efficiency of charge separation under exogenous stimulation can be heightened by manipulating the semiconducting performance of materials through heterojunction structures, thereby enhancing catalytic capabilities. This review summarizes the recent applications of exogenous stimulus-responsive semiconducting nanoheterojunctions for cancer theranostics. The first part of the review outlines the construction of different heterojunction types. The next section summarizes recent designs, properties, and catalytic mechanisms of various semiconductor heterojunctions in tumor therapy. The review concludes by discussing the challenges and providing insights into their prospects within this dynamic and continuously evolving field of research.

Comparative study of the photocatalytic activity of g-C3N4/MN4 (M = Mn, Fe, Co) for water splitting reaction: A theoretical study

In this study, nanocomposites of g-C3N4/MN4 (where M is Mn, Fe and Co) have been designed using advanced density functional theory (DFT) calculations. A comprehensive analysis was conducted on the geometry, electronic, optical properties, work function, charge transfer interaction and adhesion energy of the g-C3N4/MN4 heterostructures and concluded that g-C3N4/FeN4 and g-C3N4/CoN4 heterojunctions exhibit higher photocatalytic performance than individual units. The better photocatalytic activity can be attributed mainly by two facts; (i) the visible light absorption of both g-C3N4/FeN4 and g-C3N4/CoN4 interfaces are higher compared to its isolated analogs and (ii) a significant enhancement of band gap energy in g-C3N4/FeN4 and g-C3N4/CoN4 heterostructures limited the electron-hole recombination significantly. The potential of the g-C3N4/MN4 heterojunctions as a photocatalyst for the water splitting reaction was assessed by examining its band alignment for water splitting reaction. Importantly, while the electronic and magnetic properties of MN4 systems were studied, this is the first example of inclusion of MN4 on graphene-based material (g-C3N4) for studying the photocatalytic activity. The state of the art DFT calculations emphasis that g-C3N4/FeN4 and g-C3N4/CoN4 heterojunctions are half metallic photocatalysts, which is limited till date.

Molecularly imprinted Photoelectrochemical sensor for Escherichia coli based on Cu:ZIF-8/KZ3TTz heterojunction

Herein, a signal stable molecularly imprinted photoelectrochemical (MIP-PEC) sensing platform was designed to sensitively detect Escherichia coli by incorporating polythiophene film with Cu: ZIF-8/KZ3TTz heterojunction. Attributed to the formation of a staggered type II heterostructure between KZ3TTz and Cu: ZIF-8 semiconductors, the Cu: ZIF-8/KZ3TTz heterojunction exhibited stable and significant cathode PEC response. Impressively, selective MIP film was grown on the surface of Cu: ZIF-8/KZ3TTz/GCE by electro-polymerization of 2,2-Dimethyl-5-(3-thienyl)-1,3-dioxane-4,6-dione (DTDD) in the presence of E. coli. After removing E. coli, more electrons were transferred to the electrolyte solution through the imprinting cavity on the MIP film, which was eliminated by O2 in the electrolyte, causing further enhancement of the cathode PEC response. On the contrary, when the imprinted cavity was filled with E. coli, the cathodic PEC response gradually decreased due to steric hindrance effect. The sensor showed excellent linearity in the range of 101 to 108 CFU/mL with a detection limit of 4.09 CFU/mL (S/N = 3). This strategy offered a novel approach for pathogenic bacteria detection in food safety and environmental monitoring.

Characterization of structure and mixing in nanoparticle hetero-aggregates using convolutional neural networks: 3D-reconstruction versus 2D-projection

Structural and chemical characterization of nanomaterials provides important information for understanding their functional properties. Nanomaterials with characteristic structure sizes in the nanometer range can be characterized by scanning transmission electron microscopy (STEM). In conventional STEM, two-dimensional (2D) projection images of the samples are acquired, information about the third dimension is lost. This drawback can be overcome by STEM tomography, where the three-dimensional (3D) structure is reconstructed from a series of projection images acquired using various projection directions. However, 3D measurements are expensive with respect to acquisition and evaluation time. Furthermore, the method is hardly applicable to beam-sensitive materials, i.e. samples that degrade under the electron beam. For this reason, it is desirable to know whether sufficient information on structural and chemical information can be extracted from 2D-projection measurements. In the present work, a comparison between 3D-reconstruction and 2D-projection characterization of structure and mixing in nanoparticle hetero-aggregates is provided. To this end, convolutional neural networks are trained in 2D and 3D to extract particle positions and material types from the simulated or experimental measurement. Results are used to evaluate structure, particle size distributions, hetero-aggregate compositions and mixing of particles quantitatively and to find an answer to the question, whether an expensive 3D characterization is required for this material system for future characterizations.

Microwave-Assisted Hydrothermal Synthesis of Photocatalytic Truncated-Bipyramidal TiO2/Ti3CN Heterostructures Derived from Ti3CN MXene

TiO2/MXene heterostructure has garnered significant interest as a photocatalyst due to its large surface area and efficient charge carrier separation at the interface. However, current synthesis methods produce TiO2 without clear crystal faceting and often require complicated postprocessing step, limiting its practical applications. We demonstrate a facile and controlled microwave-assisted hydrothermal synthesis for transforming multilayered Ti3CN MXene to a truncated-bipyramidal TiO2/Ti3CN heterostructure. The resulting TiO2 nanocrystals at the Ti3CN surface exhibited crystalline anatase truncated bipyramids, exposing {001} and {101} facets. We further tailored an indirect optical band gap of the TiO2/Ti3CN heterostructure in the range of 3.17-3.23 eV by varying the hydrothermal synthesis time from 15 min to 5 h at a fixed temperature of 160 °C. Efficient charge separation allowed us to decompose 97% of methylene blue (MB) within 30 min of ultraviolet (UV) light irradiation, ∼3.9-fold faster than the benchmark P25, higher than any other TiO2/MXene heterostructures. With simulated white light, we achieved over 60% efficiency of the dye decomposition within 2 h of irradiation, which resulted in 1.5-fold faster kinetics than P25. We also observed a similar excellent performance of Ti3CN-derived TiO2 in decomposing various persistent synthetic dyes, including commercial textile dye, methyl orange, and rhodamine B. In conclusion, our study provides a strategy for utilizing MXene chemical reactivity to produce highly crystalline optically active TiO2/Ti3CN heterostructure. The developed heterostructure can serve as an efficient photocatalyst for the degradation of organic pollutants.

Regulating the Layer Stacking Configuration of CTF-TiO2 Heterostructure for Improving the Photocatalytic CO2 Reduction

Herein, covalent triazine frameworks in eclipsed AA and staggered AB stacking modes are respectively used for the in-situ growth of TiO2, and two heterostructures are obtained. Due to the highly organized stacking of the molecular layer in CTF-AA that strengthens the interlayer interaction, the light absorption and carrier migration of CTF-AA/TiO2 are both enhanced in comparison to those of its component or CTF-AB/TiO2. Correspondently, the photocatalytic CO2 reduction reaction (CO2RR) of CTF-AA/TiO2 proffers 9.19 μmol·g-1·h-1 CH4 and 2.32 μmol·g-1·h-1 CO production, about 9.2 and 4.3 times greater than that of pristine TiO2, respectively. Even though the innate photoresponse of the triazine unit endows CTF-AB/TiO2 with augmented light capturing, its photocatalytic CO2 conversion is relatively insignificant. According to the analyses of the planar-averaged electron density difference and Bader charge, the unproductive CO2 efficiency might be due to the insufficient interfacial electron transfer from TiO2 to CTF-AB. Given that the ΔG (-3.22 eV) of CHO intermediate generation is lower than that of CO desorption (-1.23 eV), the reaction tends to further generate CH4 other than yielding CO. This study could shed fresh light over the reasonable design of effective photocatalytic heterostructures.

A compendium of all-in-one solar-driven water splitting using ZnIn2S4-based photocatalysts: guiding the path from the past to the limitless future

Photocatalytic water splitting represents a leading approach to harness the abundant solar energy, producing hydrogen as a clean and sustainable energy carrier. Zinc indium sulfide (ZIS) emerges as one of the most captivating candidates attributed to its unique physicochemical and photophysical properties, attracting much interest and holding significant promise in this domain. To develop a highly efficient ZIS-based photocatalytic system for green energy production, it is paramount to comprehensively understand the strengths and limitations of ZIS, particularly within the framework of solar-driven water splitting. This review elucidates the three sequential steps that govern the overall efficiency of ZIS with a sharp focus on the mechanisms and inherent drawbacks associated with each phase, including commonly overlooked aspects such as the jeopardising photocorrosion issue, the neglected oxidative counter surface reaction kinetics in overall water splitting, the sluggish photocarrier dynamics and the undesired side redox reactions. Multifarious material design strategies are discussed to specifically mitigate the formidable limitations and bottleneck issues. This review concludes with the current state of ZIS-based photocatalytic water splitting systems, followed by personal perspectives aimed at elevating the field to practical consideration for future endeavours towards sustainable hydrogen production through solar-driven water splitting.

MgCr2O4/MgIn2S4 Spinel/Spinel S-Scheme Heterojunction: A Robust Catalyst for Photothermal-Assisted Photocatalytic CO2 Reduction

Photocatalytic CO2 reduction technology has engaged significant attention due to its high efficiency, high selectivity, and environmental friendliness. However, its application is severely restrained by issues such as low separation efficiency of photogenerated carriers and a limited light absorption range. This work proposes an innovative MgCr2O4/MgIn2S4 magnesium-based spinel/spinel heterostructure photocatalyst to improve the photocatalytic CO2 reduction efficiency through the synergistic contributions of S-scheme heterojunction and photothermal effect. On the one hand, the unique S-scheme charge transfer mechanism enables the effective separation of photogenerated carriers. On the other hand, the photothermal effect allows an accelerated charge migration by increasing the reaction center temperature. Moreover, the abundant oxygen vacancies serve as electron traps and CO2 adsorption sites, unifying reaction and adsorption sites and substantially improving catalytic efficiency. Under UV-vis and UV-vis-NIR illumination, the average CO yields of the MgCr2O4/MgIn2S4 composite are 8.03 and 15.62 μmol g-1 h-1, respectively, greatly higher than those of pure MgCr2O4 and MgIn2S4 samples. Furthermore, the fabricated photocatalyst demonstrates excellent performance and structure stability. Therefore, this work may offer a new strategy for designing efficient and stable photocatalysts.

Boosting Photocatalytic Hydrogen Production by MOF-Derived Metal Oxide Heterojunctions with a 10.0 % Apparent Quantum Yield

Photocatalytic hydrogen production offers an alternative pathway to establish a sustainable energy economy, utilizing the Earth's natural sunlight and water resources to address environmental concerns associated with fossil fuel combustion. While numerous photoactive materials exhibit high potential for generating hydrogen from water, the synergy achieved by combining two different materials with complementary properties in the form of heterojunctions can significantly enhance the rate of hydrogen production and quantum efficiency. Our study describes the design and generation of the metal-organic framework-derived (MOF) metal oxide heterojunction herein referred to as RTTA, composed of RuO2/N,S-TiO2. The RuO2/N,S-TiO2 is generated through the pyrolysis of MOFs, Ru-HKUST-1, and the amino-functionalized MIL-125-NH2 in the presence of thiourea. Among the various RTTA materials tested, RTTA-1, characterized by the lowest RuO2 content, exhibited the highest hydrogen evolution rate, producing 10,761 μmol ⋅ hr-1 ⋅ g-1 of hydrogen with an apparent quantum yield of 10.0 % in pure water containing glycerol. In addition to RTTA-1, we generated two other MOF-derived metal oxide heterojunctions, namely ZTTA-1 (ZnO/N,S-TiO2) and ITTA-1 (In2O3/N,S-TiO2). These heterojunctions were tested for their photocatalytic activity, leading to apparent quantum yields of 0.7 % and 0.3 %, respectively. The remarkable photocatalytic activity observed in RTTA-1 is thought to be attributed to the synergistic effects arising from the combination of metallic properties inherent in the metal oxides, complemented by the presence of suitable band alignment, porosity, and surface properties inherited from the parent MOFs. These properties enhance electron transfer and restrict hole movement. The photocatalytic efficiency of RTTA-1 was further demonstrated in actual water samples, producing hydrogen with a rate of 8,190 μmol ⋅ hr-1 ⋅ g-1 in tap water, and 6,390 μmol ⋅ hr-1 ⋅ g-1 in river water.

Structurally and surficially activated TiO2 nanomaterials for photochemical reactions

Renewable fuels and environmental remediation are of paramount importance in today's world due to escalating concerns about climate change, pollution, and the finite nature of fossil fuels. Transitioning to sustainable energy sources and addressing environmental pollution has become an urgent necessity. Photocatalysis, particularly harnessing solar energy to drive chemical reactions for environmental remediation and clean fuel production, holds significant promise among emerging technologies. As a benchmark semiconductor in photocatalysis, TiO2 photocatalyst offers an excellent solution for environmental remediation and serves as a key tool in energy conversion and chemical synthesis. Despite its status as the default photocatalyst, TiO2 suffers from drawbacks such as a high recombination rate of charge carriers, low electrical conductivity, and limited absorption in the visible light spectrum. This review provides an in-depth exploration of the fundamental principles of photocatalytic reactions and presents recent advancements in the development of TiO2 photocatalysts. It specifically focuses on strategic approaches aimed at enhancing the performance of TiO2 photocatalysts, including improving visible light absorption for efficient solar energy harvesting, enhancing charge separation and transportation efficiency, and ensuring stability for robust photocatalysis. Additionally, the review delves into the application of photodegradation and photocatalysis, particularly in critical processes such as water splitting, carbon dioxide reduction, nitrogen fixation, hydrogen peroxide generation, and alcohol oxidation. It also highlights the novel use of TiO2 in plastic polymerization and degradation, showcasing its potential for converting plastic waste into valuable chemicals and fuels, thereby offering sustainable waste management solutions. By addressing these essential areas, the review offers valuable insights into the potential of TiO2 photocatalysis for addressing pressing environmental and energy challenges. Furthermore, the review encompasses the application of TiO2 photochromic systems, expanding its scope to include other innovative research and applications. Finally, it addresses the underlying challenges and provides perspectives on the future development of TiO2 photocatalysts. Through addressing these issues and implementing innovative strategies, TiO2 photocatalysis can continue to evolve and play a pivotal role in sustainable energy and environmental applications.

In-Situ Construction of Atomic-Level Fe-O Bond Bridges within Fe2N/g-C3N4 Heterojunction for Efficient Visible-Light-Driven Photocatalytic H2 Production

The limited active sites and faster photogenerated electron-hole pair recombination rate of g-C3N4 restrict its application in photocatalytic H2 production. Constructing heterojunctions has been shown to improve the spatial (directional) separation of photogenerated electrons and holes. However, due to interface mismatch in traditional heterojunction structures and a lack of precise electron transport channels, the photocatalytic efficiency is limited. Here, we developed a two-step calcination approach to create an Fe2N/g-C3N4 heterojunction linked by Fe-O bonds (named as Fe-OCN). The newly formed Fe-O bonds within the heterojunction can act as atomic-level interface electron transfer channels, directly transferring the photogenerated electrons of g-C3N4 to the reactive center Fe2N, significantly improving the charge transfer rate and utilization, thus promoting visible-light-driven photocatalytic H2 production. The optimal Fe-OCN achieved a H2 production rate of 5986.29 μmol g-1 h-1 under visible light, 13.44 times higher than that of the OCN due to efficient charge separation and transfer capabilities. This work provides a constructive reference for the design and synthesis of organic-inorganic heterojunction with chemically bonded interfaces, establishing quick electron transfer channels, and achieving targeted electron transfer.

Cu2O-Mediated Heterojunction Conversion from Dual Type II to Dual Z-Scheme: Its Application in Photoelectric-Colorimetric Dual-Mode Detection of Fat Mass and Obesity-Associated (FTO) Protein

Although the construction of heterojunction has been used in photoelectrochemical (PEC) biosensors, their potential for tunable optical properties has not been deeply explored. Based on the fact that a type-II heterojunction and Z-scheme heterojunction have the same energy band structure, effective alteration of the electron transfer pathway has been achieved by introducing unique photoactive materials into the system and exploiting the interactions between the photomaterials. Based on this, we reported a novel polarity-switchable dual-mode sensor for fat mass and obesity-associated (FTO) protein analysis. Specifically, the MgIn2S4/Bi2MoO6/Bi2S3 dual type-II heterojunction was used as the sensing interface in concert with the rolling circle amplification, CRISPR/Cas12, and terminal DNA transfer enzyme multiamplification strategies, and finally, Cu2O was captured at the sensing interface. Due to the matched energy band, the introduction of Cu2O effectively changed the electron transfer pathway and realized the conversion from a dual type-II heterojunction to a dual Z-scheme heterojunction. It caused the switch of the photocurrent from the anode to the cathode. The developed PEC method showed high sensitivity and selectivity for FTO protein detection in the range of 0.0005-500 μg/L. In addition, based on the peroxidase-like activity of Cu2O to catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine by H2O2, the electrode system also achieved the colorimetric detection of FTO protein using the naked eye with the change of the color of the detection solution from colorless to blue. The detection range was from 0.05 to 500 μg/L. This work developed a photoelectrochemical-colorimetric biosensing platform with consciously designed semiconductor structures, revealing the potential of semiconductor-structured transformations in future sensing fields.

Unveiling Advancements: Trends and Hotspots of Metal-Organic Frameworks in Photocatalytic CO2 Reduction

Metal-organic frameworks (MOFs) are robust, crystalline, and porous materials featured by their superior CO2 adsorption capacity, tunable energy band structure, and enhanced photovoltaic conversion efficiency, making them highly promising for photocatalytic CO2 reduction reaction (PCO2RR). This study presents a comprehensive examination of the advancements in MOFs-based PCO2RR field spanning the period from 2011 to 2023. Employing bibliometric analysis, the paper scrutinizes the widely adopted terminology and citation patterns, elucidating trends in publication, leading research entities, and the thematic evolution within the field. The findings highlight a period of rapid expansion and increasing interdisciplinary integration, with extensive international and institutional collaboration. A notable emphasis on significant research clusters and key terminologies identified through co-occurrence network analysis, highlighting predominant research on MOFs such as UiO, MIL, ZIF, porphyrin-based MOFs, their composites, and the hybridization with photosensitizers and molecular catalysts. Furthermore, prospective design approaches for catalysts are explored, encompassing single-atom catalysts (SACs), interfacial interaction enhancement, novel MOF constructions, biocatalysis, etc. It also delves into potential avenues for scaling these materials from the laboratory to industrial applications, underlining the primary technical challenges that need to be overcome to facilitate the broader application and development of MOFs-based PCO2RR technologies.

A Review on Bi2WO6-Based Materials for Photocatalytic CO2 Reduction

Photocatalytic reduction of CO2 (PCR) technology offers the capacity to transmute solar energy into chemical energy through an eco-friendly and efficacious process, concurrently facilitating energy storage and carbon diminution, this innovation harbors significant potential for mitigating energy shortages and ameliorating environmental degradation. Bismuth tungstate (Bi2WO6) is distinguished by its robust visible light absorption and distinctive perovskite-type crystal architecture, rendering it highly efficiency in PCR. In recent years, numerous systematic strategies have been investigated for the synthesis and modification of Bi2WO6 to enhance its photocatalytic performance, aiming to achieve superior applications. This review provides a comprehensive review of the latest research progress on Bi2WO6 based materials in the field of photocatalysis. Firstly, outlining the fundamental principles, associated reaction mechanisms and reduction pathways of PCR. Then, the synthesis strategy of Bi2WO6-based materials is introduced for the regulation of its photocatalytic properties. Furthermore, accentuating the extant applications in CO2 reduction, including metal-Bi2WO6, semiconductor-Bi2WO6 and carbon-based Bi2WO6 composites etc. while concludes with an examination of the future landscape and challenges faced. This review hopes to serve as an effective reference for the continuous improvement and implementation of Bi2WO6-based photocatalysts in PCR.

Photocatalytic overall water splitting endowed by modulation of internal and external energy fields

The pursuit of sustainable and clean energy sources has driven extensive research into the generation and use of novel energy vectors. The photocatalytic overall water splitting (POWS) reaction has been identified as a promising approach for harnessing solar energy to produce hydrogen to be used as a clean energy carrier. Materials chemistry and associated photocatalyst design are key to the further improvement of the efficiency of the POWS reaction through the optimization of charge carrier separation, migration and interfacial reaction kinetics. This review examines the latest progress in POWS, ranging from key catalyst materials to modification strategies and reaction design. Critical analysis focuses on carrier separation and promotion from the perspective of internal and external energy fields, aiming to trace the driving force behind the POWS process and explore the potential for industrial development of this technology. This review concludes by presenting perspectives on the emerging opportunities for this technology, and the challenges to be overcome by future studies.

Polyacid-Modulated Carrier Dynamic Behavior at the Interface of 0D/2D Heterojunctions

Heterojunctions formed by polyoxometalates and 2D materials draw attention owing to their remarkable photoelectric and catalytic properties. However, the intrinsic mechanisms of polyoxometalates regulating the heterojunction photoelectric properties are unclear. Herein, we constructed two types of heterojunctions by integrating polyoxometalates (Keggin-type H3PW12O40 and Lindqvist-type H2W6O19) on g-C3N4 monolayers, exploring photoexcited carrier dynamics in these heterojunctions by ab initio calculations combined with nonadiabatic molecular dynamics (NAMD) simulations. Our results show that electrons and holes in H3PW12O40 on g-C3N4 monolayers relax within 583 and 760 fs, respectively. The electron-hole recombination occurs at 342 fs, faster than carrier separation, aligning with the behavior of Z-type heterojunctions. Contrarily, the H2W6O19/g-C3N4 heterojunction exhibits the typical characteristics of type II heterojunctions, with a long photogenerated carrier lifetime reaching 652 fs. These findings show tunable band alignment in polyoxometalate-supported systems by modulating polyoxometalate type, influencing hot electron dynamics, and guiding 0D/2D heterojunction design.

S-Scheme heterojunction of Cs2SnBr6/C3N4 with interfacial electron exchange toward efficient photocatalytic NO abatement

Photocatalytic technology is of great significance in environmental purification due to its eco-friendly and cost-effective operations. However, low charge-transfer efficiency restricts the photocatalytic activity of the catalyst. Herein, we report Cs2SnBr6/C3N4 composite catalysts that exhibit a robust interfacial electron exchange thereby enhancing photocatalytic nitric oxide (NO) oxidation. A comprehensive study has demonstrated the S-scheme electron transfer mechanism. Benefiting from the interfacial internal electric field, the C-Br bond serves as a direct electron transfer channel, resulting in enhanced charge separation. Furthermore, the S-scheme heterojunction effectively traps high redox potential electrons and holes, leading to the production of abundant reactive oxygen radicals that enhance photocatalytic NO abatement. The NO removal rate of the Cs2SnBr6/C3N4 heterogeneous system can reach 86.8 %, which is approximately 3-fold and 18-fold that of pristine C3N4 and Cs2SnBr6, respectively. The comprehensive understanding of the electron transfer between heterojunction atomic interfaces will provide a novel perspective on efficient environmental photocatalysis.

Surface-anchored N-based functional groups driven photoactivity of SrTiO3

Surface modification, including the anchoring of functional groups is a popular method to increase the photocatalytic activity of semiconductor photocatalysts. These species can trap excited electrons, thus prolonging the life of the charge carriers. N-containing functional groups are suitable for this purpose due to their high electron density. Here, we report a facile synthesis method for preparing interfacial N-based functional groups-modified and nitrogen-doped SrTiO3 photocatalysts. Among the modified samples (with 0.42-11.14 at.% nominal nitrogen content), the one with 7.71 at.% nitrogen showed 6.4 times higher photooxidation efficiency for phenol and 2.2 times better photoreduction efficiency for CO2 conversion than the unmodified SrTiO3 reference. Characterization results showed that using a low amount of nitrogen source resulted in low but measurable nitrogen doping, which did not significantly affect the photocatalytic activity. The formation of surface amine groups was significant even at lower initial nitrogen concentrations, while higher amounts of nitrogen source gradually resulted in the incorporation of nitrogen in higher amounts. Surface amine groups decreased the recombination of charge carriers, resulting in increased photocatalytic activity.

Copper Sulfide based Photocatalysts, Electrocatalysts and Photoelectrocatalysts: Innovations in Structural Modulation and Application

Copper sulfides (CuxS, 1 ≤ x ≤ 2) are notable for their unique photoelectric properties and potential applications, particularly in photo/electrocatalysis. These materials are valued for their tunable band gap, near-infrared optical characteristics, and plasmonic resonance effects. However, challenges such as low catalytic activity and limited stability impede their practical applications. This review addresses these issues by exploring advanced strategies for electronic structure modulation, including atomic doping, shape alteration, heterojunction construction, and defect introduction to enhance catalytic efficiency. A detailed analysis of the optical and electrical properties of CuxS across various stoichiometric ratios and crystal structures is provided, offering a comprehensive overview of their applications in photocatalysis, electrocatalysis, and photo/electrocatalysis. Additionally, the review synthesizes current knowledge and highlights the potential of these strategies to optimize CuxS-based photo/electrocatalysts, proposing future research directions to bridge the gap between theoretical studies and practical applications. This work underscores the importance of CuxS in photo/electrocatalysis and aims to inspire further innovation and exploration in this field, emphasizing its significance in material science and engineering.

Recent Advances in Structure Design and Application of Metal Halide Perovskite-Based Gas Sensor

Metal halide perovskites (MHPs) are emerging gas-sensing materials and have attracted considerable attention in gas sensors due to their unique bandgap structure and tunable optoelectronic properties. The past decade has witnessed significant developments in the gas-sensing field; however, their intrinsic structural instability and ambiguous gas-sensing mechanisms hamper their practical applications. Herein, we summarize the recent advances in MHP-based gas sensors. The physicochemical properties of MHPs are discussed at first. The structure design, including dimension design and engineering design, is overviewed as well as their fabrication methods, and we put forward our insights into the gas-sensing mechanism of MHPs. It is believed that enhanced understanding of gas-sensing mechanisms of MHPs are helpful for their application as gas-sensing materials, and structure design can enhance their stability, sensing sensitivity, and selectivity to target gases as gas sensors. Subsequently, the latest developments in MHP-based gas sensors are summarized according to their different application scenarios. Finally, we conclude with the current status and challenges in this field and propose future perspectives.

An updated review of few-layer black phosphorus serving as a promising photocatalyst: synthesis, modification and applications

Semiconductor photocatalysts represent a potential strategy to simultaneously solve the global energy shortage and environmental pollution, and black phosphorus (BP) has gained widespread applications in photocatalysis due to its high hole mobility, strong light trapping capabilities, and adjustable band gap. Nevertheless, the original material exhibits unsatisfactory photocatalytic activity in terms of low carrier separation efficiency, weak environmental stability, and difficult to control layer thickness. The following review briefly presents the fundamental characteristics and extensively discusses the synthesis methods and modification strategies for few-layer black phosphorus (FL-BP). Furthermore, various applications of composite photocatalysts derived from FL-BP such as water splitting, pollutant degradation, the carbon dioxide reduction reaction (CO2RR), phototherapy, bacterial disinfection, N2 fixation, and hydrogenation reactions are reviewed. Finally, the opportunities and challenges for the development and further investigation of advanced FL-BP-based photocatalysts are also presented.

Au/Ag@ZnS yolk-shell photocatalysts enhanced with noble metals and hyaluronic acid for efficient hydrogen production in rheumatoid arthritis therapy

Rheumatoid arthritis, characterized by the abnormal proliferation of synovial cells and extensive macrophage infiltration, is a chronic inflammatory disease. Molecular hydrogen, known for its antioxidant properties, has shown promise in eliminating reactive oxygen species. However, the low solubility and bioavailability of hydrogen limit the effectiveness of this therapy. To overcome these issues, we developed a novel yolk-shell heterostructure, H-AAZS (Au/Ag@ZnS modified hyaluronic acid), utilizing a hydrothermal cation exchange process. Through ion doping, semiconductor hybridization, and Schottky barriers in H-AAZS, photocatalysis for hydrogen generation has been successfully implemented using 660 nm laser irradiation. Additionally, the H-AAZS demonstrate the capacity for mild photothermal therapy, inducing apoptosis in synovial cells with Au's hot electrons with 660 nm laser irradiation. This strategy not only improves the abnormal proliferation of synovial cells but also avoids the exacerbation of inflammation caused by thermal stimulation. Both in vitro and in vivo experiments validate the synergistic effects of hydrogen production mediated anti-inflammatory responses, macrophage polarization and photothermal therapy. Therefore, this work represents a significant advancement as it ingeniously harnesses photocatalysis to modulate the synovial microenvironment while mitigating the side effects associated with photothermal therapy. This nanocrystal provides new and valuable insights into the potential treatment of Rheumatoid arthritis.

Enhanced tetracycline degradation by novel Mn-FeOOH/CNNS photocatalysts in a visible-light-driven photocatalysis coupled peroxydisulfate system

Recently, photocatalysis combined peroxydisulfate activation under visible light (PC-PDS/Vis) was developed as a promising technology for removing antibiotics in water. Herein, Mn doped FeOOH (Mn-FeOOH) nanoclusters were grown in-situ on the surface of graphitic carbon nitride nanosheets (CNNS) using a wet chemical method, which served as a visible-light-driven photocatalyst for peroxydisulfate (PDS) activation. Photovoltaic property characterizations revealed that Mn-FeOOH/CNNS owned superior light capture ability and carrier separation efficiency. According to DFT calculations, the synergistic effect between Mn and Fe species was proved to enhance the adsorption and activation of PDS. 99.7% of tetracycline (TC) was rapidly removed in 50 min in the PC-PDS/Vis system. In addition, Mn-FeOOH/CNNS exhibited high recycling stability with low iron leaching, attributed to the interaction between Mn-FeOOH clusters and carbon species. Quenching experiments and electron spin resonance (ESR) tests unveiled that •O2- played a significant role in TC removal, while •OH and SO4•- acted as additional roles contributing to the overall process. These findings given a new strategy for antibiotics degradation by photocatalysis, offering deeper insights for the advancement of sustainable and cutting-edge wastewater treatment technologies.

Advances in the heterostructures for enhanced hydrogen production efficiency: a comprehensive review

The growing global energy demand and heightened environmental consciousness have contributed to the increasing interest in green energy sources, including hydrogen production. However, the efficacy of this technology is contingent upon the efficient separation of charges, high absorption of sunlight, rapid charge transfer rate, abundant active sites and resistance to photodegradation. The utilization of photocatalytic heterostructures coupling two materials has proved to be effective in tackling the aforementioned challenges and delivering exceptional performance in the production of hydrogen. The present article provides a comprehensive overview of operational principles of photocatalysis and the combination of photocatalytic and piezo-catalytic applications with heterostructures, including the transfer behavior and mechanisms of photoexcited non-equilibrium carriers between the materials. Furthermore, the effects of recent advances and state-of-the-art designs of heterostructures on hydrogen production are discussed, offering practical approaches to form heterostructures for efficient hydrogen production.

Water adsorption on ferroelectric PbTiO3 (0 0 1) surface: A density functional theory study

In this work, combining the density functional theory (DFT) calculations and the ab initio molecular dynamics (AIMD) simulations, the water adsorption behavior, including the molecular and the dissociative adsorption on the negatively polarized (0 0 1) surface of ferroelectric PbTiO3 was comprehensively studied. Our theoretical results show that the dissociative adsorption of water is more energetically favorable than the molecular adsorption on the pristine PbTiO3 (0 0 1) surface. It has been also found that introducing surface oxygen vacancies (OV) can enhance the thermodynamic stability of dissociative adsorption of water molecule. The AIMD simulations demonstrate that water molecule can spontaneously dissociate into hydrogen atoms (H) and hydroxyl groups (OH) on the pristine PbTiO3 (0 0 1) surface at room temperature. Moreover, the surface OV can effectively facilitate the dissociative adsorption of water molecules, leading to a high surface coverage of OH group, thus giving rise to a high reactivity for water splitting on defective PbTiO3 (0 0 1) surface with OV. Our results not only comprehensively understand the reason for the photocatalytic water oxidation activity of single domain PbTiO3, but also shed light on the development of high performance ferroelectric photocatalysts for water splitting.

Heterostructure g-C3N4/Bi2MoO6 PVDF nanofiber composite membrane for the photodegradation of steroid hormone micropollutants

Photocatalytic membrane reactors (PMRs) are a promising technology for micropollutant removal. Sunlight utilization and catalyst surface sites limit photodegradation. A poly(vinylidene fluoride) (PVDF) nanofiber composite membrane (NCM) with immobilized visible-light-responsive g-C3N4/Bi2MoO6 (BMCN) were developed. Photodegradation of steroid hormones with the PVDF-BMCN NCM was investigated with varying catalyst properties, operating conditions, and relevant solution chemistry under solar irradiation. Increasing CN ratio (0-65 %) enhanced estradiol (E2) degradation from 20 ± 10 to 75 ± 7 % due to improved sunlight utilization and photon lifetime. PVDF nanofibers reduced self-aggregation of catalysts. Hydraulic residence time and light intensity enhanced the photodegradation. With the increasing pH value, the E2 removal decreased from 84 ± 4 to 67 ± 7 % owing to electrical repulsion and thus reduced adsorption between catalysts and E2. A removal of 96 % can be attained at environmentally relevant feed concentration (100 ng.L-1) with a flux of 60 L.m-2.h-1, irradiance of 100 mW.cm-2, and 1 mg.cm-2 BMCN65 loading. This confirmed that heterojunction photocatalysts can enhance micropollutants degradation in PMRs.

Plasmonic group IVB transition metal nitrides: Fabrication methods and applications in biosensing, photovoltaics and photocatalysis

This review paper focuses on group IVB transition metal nitrides (TMNs) such as titanium nitride (TiN), zirconium nitride (ZrN), and hafnium nitride (HfN) and as alternative plasmonic materials to noble metals like gold and silver. It delves into the fabrication methods of these TMNs, particularly emphasizing thin film fabrication techniques like magnetron sputtering and atomic layer deposition, as well as nanostructure fabrication processes applied to these thin films. Overcoming the current fabrication and application-related challenges requires a deep understanding of the material properties, deposition techniques, and application requirements. Here, we discuss the impact of fabrication parameters on the properties of resulting films, highlighting the importance of aligning fabrication methods with practical application requirements for optimal performance. Additionally, we summarize and tabulate the most recent plasmonic applications of these TMNs in fields like biosensing, photovoltaic energy, and photocatalysis, contributing significantly to the current literature by consolidating knowledge on TMNs.

Conjugated diamine cation based halide perovskitoid enables robust stability and high photodetector performance

Low-dimensional lead halide materials have proved to be intrinsically stable semiconductor materials. However, the development of one-dimensional (1D) perovskites or perovskitoids with both robust water stability and high optoelectronic performance still faces significant challenges. Here, we report a new class of 1D (TzBIPY)Pb2X6 (X = Cl, Br, I) perovskitoids featuring a π-conjugated diamine cation (TzBIPY = 2,5-di(pyridin-4-yl)thiazolo[5,4-d]thiazole). The TzBIPY2+ cation with delocalized electrons directly contributes to the electronic structure and hence reduces the band gap. Especially, the Br-based material exhibits enhanced carrier separation and transport capacity, benefiting from the improved electronic conjugation together with a type II intramolecular heterojunction between conjugated organic cations and Pb-X octahedra. The (TzBIPY)Pb2Br6 photodetector exhibits an impressive photocurrent on/off ratio of 8.1 × 105, which is much superior to the previous three-dimensional (3D) perovskite benchmark. Additionally, the π-conjugated cations serve as dense protective shields for vulnerable Pb-X inorganic lattice against being attacked by water, thus demonstrating exceptional stability even immersed in water for over 3000 h.

Ti3C2 quantum dots-modified oxygen-vacancy-rich BiOBr hollow microspheres toward optimized photocatalytic performance

The Ti3C2 quantum dots (QDs)/oxygen-vacancy-rich BiOBr hollow microspheres composite photocatalyst was prepared using solvothermal synthesis and electrostatic self-assembly techniques. Together, Ti3C2QDs and oxygen vacancies (OVs) enhanced photocatalytic activity by broadening light absorption and improving charge transfer and separation processes, resulting in a significant performance boost. Meanwhile, the photocatalytic efficiency of Ti3C2 QDs/BiOBr-OVs is assessed to investigate its capability for oxygen evolution and degradation of tetracycline (TC) and Rhodamine B (RhB) under visible-light conditions. The rate of oxygen production is observed to be 5.1 times higher than that of pure BiOBr-OVs, while the photocatalytic degradation rates for TC and RhB is up to 97.27% and 99.8%, respectively. The synergistic effect between Ti3C2QDs and OVs greatly enhances charge separation, leading to remarkable photocatalytic activity. Furthermore, the hollow microsphere contributes to the enhanced photocatalytic performance by facilitating multiple light scatterings and providing ample surface-active sites. The resultant Ti3C2QDs/BiOBr-OVs composite photocatalyst demonstrates significant potential for environmental applications.

Recent progress and new insights on semiconductor heterojunctions powered photocatalytic desulphurization: A review

Desulphurization of fossil fuels is a critical process in reducing the sulphur content from environment, which is a major contributor to atmospheric pollution. Traditional desulphurization techniques, while effective, often involve high energy consumption and the use of harsh chemicals. Recently, photocatalytic desulphurization has emerged as a promising, eco-friendly alternative, leveraging the potential of photocatalysts especially semiconductor heterojunctions to enhance photocatalytic efficiency. This review comprehensively discusses the significance and mechanism of photocatalytic desulphurization reactions, designing of various heterojunctions such as conventional, p-n, Z-scheme and S-scheme, their charge transfer mechanism and properties and their contribution to the photocatalytic desulphurization activity. Heterojunctions, formed by combining different semiconductor materials, facilitate efficient charge separation and broaden the light absorption range, thereby improving the photocatalytic performance under visible light. Furthermore, the recent advancements in the heterojunction systems in the field of photocatalytic desulphurization activity have been discussed in detail and summarized. The current limitations and challenges in this particular field are also explored. The paper concludes with an outlook on future research directions and the potential industrial applications of heterojunction-powered photocatalytic desulphurization, emphasizing its role in achieving cleaner energy production and environmental sustainability.

Dual Channel H2O2 Photosynthesis in Pure Water over S-Scheme Heterojunction Cs3PMo12/CC Boosted by Proton and Electron Reservoirs

Dual channel photo-driven H2O2 production in pure water on small-scale on-site setups is a promising strategy to provide low-concentrated H2O2 whenever needed. This process suffers, however, strongly from the fast recombination of photo-generated charge carriers and the sluggish oxidation process. Here, insoluble Keggin-type cesium phosphomolybdate Cs3PMo12O40 (abbreviated to Cs3PMo12) is introduced to carbonized cellulose (CC) to construct S-scheme heterojunction Cs3PMo12/CC. Dual channel H2O2 photosynthesis from both H2O oxidation and O2 reduction in pure water has been thus achieved with the production rate of 20.1 mmol L-1 gcat. -1 h-1, apparent quantum yield (AQY) of 2.1% and solar-to-chemical conversion (SCC) efficiency of 0.050%. H2O2 accumulative concentration reaches 4.9 mmol L-1. This high photocatalytic activity is guaranteed by unique features of Cs3PMo12/CC, namely, S-scheme heterojunction, electron reservoir, and proton reservoir. The former two enhance the separation of photo-generated charge carriers, while the latter speeds up the torpid oxidation process. In situ experiments reveal that H2O2 is formed via successive single-electron transfer in both channels. In real practice, exposing the reaction system under natural sunlight outdoors successfully results in 0.24 mmol L-1 H2O2. This work provides a key practical strategy for designing photocatalysts in modulating redox half-reactions in photosynthesis.

Exfoliated 2D Nanosheet-Based Conjugated Polymer Composites with P-N Heterojunction Interfaces for Highly Efficient Electrocatalytic Hydrogen Evolution

We have achieved a significant breakthrough in the preparation and development of two-dimensional nanocomposites with P-N heterojunction interfaces as efficient cathode catalysts for electrochemical hydrogen evolution reaction (HER) and iodide oxidation reaction (IOR). P-type acid-doped polyaniline (PANI) and N-type exfoliated molybdenum disulfide (MoS2) nanosheets can form structurally stable composites due to formation of P-N heterojunction structures at their interfaces. These P-N heterojunctions facilitate charge transfer from PANI to MoS2 structures and thus significantly enhance the catalytic efficiency of MoS2 in the HER and IOR. Herein, by combining efficient sodium-functionalized chitosan-assisted MoS2 exfoliation, electropolymerization of PANI on nickel foam (NF) substrate, and electrochemical activation, controllable and scalable Na-Chitosan/MoS2/PANI/NF electrodes are successfully constructed as non-noble metal-based electrochemical catalysts. Compared to a commercial platinum/carbon (Pt/C) catalyst, the Na-Chitosan/MoS2/PANI/NF electrode exhibits significantly lower resistance and overpotential, a similar Tafel slope, and excellent catalytic stability at high current densities, demonstrating excellent catalytic performance in the HER under acidic conditions. More importantly, results obtained from proton exchange membrane fuel cell devices confirm the Na-Chitosan/MoS2/PANI/NF electrode exhibits a low turn-on voltage, high current density, and stable operation at 2 V. Thus, this system holds potential as a replacement for Pt/C with feasibility for applications in energy-related fields.

A Review of Metal-Organic Frameworks Derived Hollow-Structured Photocatalysts: Synthesis and Applications

Photocatalysis is a most important approach to addressing global energy shortages and environmental issues due to its environmentally friendly and sustainable properties. The key to realizing efficient photocatalysis relies on developing appropriate catalysts with high efficiency and chemical stability. Among various photocatalysts, Metal-organic frameworks (MOFs)-derived hollow-structured materials have drawn increased attention in photocatalysis based on advantages like more active sites, strong light absorption, efficient transfer of pho-induced charges, excellent stability, high electrical conductivity, and better biocompatibility. Specifically, MOFs-derived hollow-structured materials are widely utilized in photocatalytic CO2 reduction (CO2RR), hydrogen evolution (HER), nitrogen fixation (NRR), degradation, and other reactions. This review starts with the development story of MOFs, the commonly adopted synthesis strategies of MOFs-derived hollow materials, and the latest research progress in various photocatalytic applications are also introduced in detail. Ultimately, the challenges of MOFs-derived hollow-structured materials in practical photocatalytic applications are also prospected. This review holds great potential for developing more applicable and efficient MOFs-derived hollow-structured photocatalysts.

One-Dimensional Single-Crystal Mesoporous TiO2 Supported CuW6O24 Clusters as Photocatalytic Cascade Nanoreactor for Boosting Reduction of CO2 to CH4

Constructing nanoreactors with multiple active sites in well-defined crystalline mesoporous frameworks is an effective strategy for tailoring photocatalysts to address the challenging of CO2 reduction. Herein, one-dimensional (1-D) mesoporous single-crystal TiO2 nanorod (MS-TiO2-NRs, ≈110 nm in length, high surface area of 117 m2 g-1, and uniform mesopores of ≈7.0 nm) based nanoreactors are prepared via a droplet interface directed-assembly strategy under mild condition. By regulating the interfacial energy, the 1-D mesoporous single-crystal TiO2 can be further tuned to polycrystalline fan- and flower-like morphologies with different oxygen vacancies (Ov). The integration of single-crystal nature and mesopores with exposed oxygen vacancies make the rod-like TiO2 nanoreactors exhibit a high-photocatalytic CO2 reduction selectivity to CO (95.1%). Furthermore, photocatalytic cascade nanoreactors by in situ incorporation of CuW6O24 (W-Cu) clusters onto MS-TiO2-NRs via Ov are designed and synthesized, which improved the CO2 adsorption capacity and achieved two-step CO2-CO-CH4 photoreduction. The second step CO-to-CH4 reaction induced by W-Cu sites ensures a high generation rate of CH4 (420.4 µmol g-1 h-1), along with an enhanced CH4 selectivity (≈94.3% electron selectivity). This research provides a platform for the design of mesoporous single-crystal materials, which potentially extends to a range of functional ceramics and semiconductors for various applications.

Engineered Two-Dimensional Transition Metal Dichalcogenides for Energy Conversion and Storage

Designing efficient and cost-effective materials is pivotal to solving the key scientific and technological challenges at the interface of energy, environment, and sustainability for achieving NetZero. Two-dimensional transition metal dichalcogenides (2D TMDs) represent a unique class of materials that have catered to a myriad of energy conversion and storage (ECS) applications. Their uniqueness arises from their ultra-thin nature, high fractions of atoms residing on surfaces, rich chemical compositions featuring diverse metals and chalcogens, and remarkable tunability across multiple length scales. Specifically, the rich electronic/electrical, optical, and thermal properties of 2D TMDs have been widely exploited for electrochemical energy conversion (e.g., electrocatalytic water splitting), and storage (e.g., anodes in alkali ion batteries and supercapacitors), photocatalysis, photovoltaic devices, and thermoelectric applications. Furthermore, their properties and performances can be greatly boosted by judicious structural and chemical tuning through phase, size, composition, defect, dopant, topological, and heterostructure engineering. The challenge, however, is to design and control such engineering levers, optimally and specifically, to maximize performance outcomes for targeted applications. In this review we discuss, highlight, and provide insights on the significant advancements and ongoing research directions in the design and engineering approaches of 2D TMDs for improving their performance and potential in ECS applications.

Utilizing full-spectrum sunlight for ammonia decomposition to hydrogen over GaN nanowires-supported Ru nanoparticles on silicon

Photo-thermal-coupling ammonia decomposition presents a promising strategy for utilizing the full-spectrum to address the H2 storage and transportation issues. Herein, we exhibit a photo-thermal-catalytic architecture by assembling gallium nitride nanowires-supported ruthenium nanoparticles on a silicon for extracting hydrogen from ammonia aqueous solution in a batch reactor with only sunlight input. The photoexcited charge carriers make a predomination contribution on H2 activity with the assistance of the photothermal effect. Upon concentrated light illumination, the architecture significantly reduces the activation energy barrier from 1.08 to 0.22 eV. As a result, a high turnover number of 3,400,750 is reported during 400 h of continuous light illumination, and the H2 activity per hour  is nearly 1000 times higher than that under the pure thermo-catalytic conditions. The reaction mechanism is extensively studied by coordinating experiments, spectroscopic characterizations, and density functional theory calculation. Outdoor tests validate the viability of such a multifunctional architecture for ammonia decomposition toward H2 under natural sunlight.

Four Birds with One Stone: A Bandgap-Regulated Multifunctional Schottky Heterojunction for Robust Synergistic Antitumor Therapy upon Endo-/Exogenous Stimuli

Considering the profound impact of structure on heterojunction catalysts, the rational design of emerging catalysts with optimized energy band structures is required for antitumor efficiency. Herein, we select titanium nitride (TiN) and Pt to develop a multifunctional Schottky heterojunction named Pt/H-TiN&SRF (PHTS) nanoparticles (NPs) with a narrowed bandgap to accomplish "four birds with one stone" involving enzyo/sono/photo three modals and additional ferroptosis. The in situ-grown Pt NPs acted as electron traps that can cause the energy band to bend upward and form a Schottky barrier, thereby facilitating the separation of electron/hole pairs in exogenous stimulation catalytic therapy. In addition, endogenous catalytic reactions based on peroxidase (POD)- and catalase (CAT)-mimicking activities can also be amplified, triggering intense oxidative stress, in which CAT-like activity decomposes endogenous H2O2 into O2 alleviating hypoxia and provides reactants for sonodynamic therapy. Moreover, PHTS NPs can elicit mild photothermal therapy with boosted photothermal properties as well as ferroptosis with loaded ferroptosis inducer sorafenib for effective tumor ablation and apoptosis-ferroptosis synergistic tumor inhibitory effect. In summary, this paper proposes an attractive design for antitumor strategies and highlights findings for heterojunction catalytic therapy with potential in tumor theranostics.

Unveiling Dynamic Structure and Bond Evolutions in BiOIO3 Photocatalysts during CO2 Reduction

We have established a correlation between photocatalytic activity and dynamic structure/bond evolutions of BiOIO3-based photocatalysts during CO2 reduction by combining operando X-ray diffraction with photoelectron spectroscopy. More specifically, the selective photo-deposition of PtOx species on BiOIO3 (010) facets could effectively promote the electron enrichment on Bi active sites of (100) facets for facilitating the adsorption/activation of CO2 molecules, leading to the formation of Bi sites with high oxidation state and the shrink of crystalline structures. With introducing light irradiation to drive CO2 reduction, the Bi active sites with high oxidation states transformed into normal Bi3+ state, accompanying with the expansion of crystalline structures. Owing to the dynamic structure, bond, and chemical-state evolutions, a significant improvement of photocatalytic activity for CO evolution has been achieved on PtOx-BiOIO3 (195.0 μmol g-1 ⋅ h-1), much higher than the pristine (61.9 μmol g-1 ⋅ h-1) as well as metal-Pt decorated BiOIO3 (70.3 μmol g-1 ⋅ h-1) samples. This work provides new insights to correlate the intrinsically dynamic structure/bond evolutions with CO2 reduction activity, which may help to guide future photocatalyst design.

Exploring the Dynamics of Charge Transfer in Photocatalysis: Applications of Femtosecond Transient Absorption Spectroscopy

Artificial photocatalytic energy conversion is a very interesting strategy to solve energy crises and environmental problems by directly collecting solar energy, but low photocatalytic conversion efficiency is a bottleneck that restricts the practical application of photocatalytic reactions. The key issue is that the photo-generated charge separation process spans a huge spatio-temporal scale from femtoseconds to seconds, and involves complex physical processes from microscopic atoms to macroscopic materials. Femtosecond transient absorption (fs-TA) spectroscopy is a powerful tool for studying electron transfer paths in photogenerated carrier dynamics of photocatalysts. By extracting the attenuation characteristics of the spectra, the quenching path and lifetimes of carriers can be simulated on femtosecond and picosecond time scales. This paper introduces the principle of transient absorption, typical dynamic processes and the application of femtosecond transient absorption spectroscopy in photocatalysis, and summarizes the bottlenecks faced by ultrafast spectroscopy in photocatalytic applications, as well as future research directions and solutions. This will provide inspiration for understanding the charge transfer mechanism of photocatalytic processes.

Stable, while Still Active? A DFT Study of Cu, Ag, and Au Single Atoms at the C3N4/TiO2 Interface

Hybrid DFT calculations are employed to compare the adsorption and stabilization of Cu, Ag, and Au atoms on graphitic C3N4 and on the heterojunction formed by g- C3N4 and TiO2. While Cu and Ag can be strongly chemisorbed in form of cations on g- C3N4, Au is only weakly physisorbed. On g- C3N4/TiO2, all coinage metal adatoms can be strongly chemisorbed, but, while Cu and Ag forms cations, Au form an Au- species. Ab Initio Molecular Dynamics simulations confirm that the metal adatoms on g-C3N4 are highly mobile at room temperature, while they remain confined in the interfacial spacing between C3N4 and TiO2 on the heterojunction, being both stably bound and reachable for the reactants in a catalytic cycle. Doping g- C3N4/TiO2 with metal single atoms permits thus to generate catalytic systems with tunable charge and chemical properties and improved stability with respect to bare C3N4. Moreover, the changes in the electronic structure of g- C3N4/TiO2 induced by the presence of the metal single atoms are beneficial also for photocatalytic applications.

Enhanced photocatalytic U(VI) reduction via double internal electric field in CoWO4/covalent organic frameworks p-n heterojunction

Photoreduction of highly toxic U(VI) to less toxic U(IV) is crucial for mitigating radioactive contamination. Herein, a CoWO4/TpDD p-n heterojunction is synthesized, with TpDD serving as the n-type semiconductor substrate and CoWO4 as the p-type semiconductor grown in situ on its surface. The Fermi energy difference between TpDD and CoWO4 provides the electrochemical potential for charge-hole separation. Moreover, the Coulombic forces from the distinct carrier types between the two materials synergistically facilitate the transfer of electrons and holes. Hence, an internal electric field directed from TpDD to CoWO4 is established. Under photoexcitation conditions, charges and holes migrate efficiently along the curved band and internal electric field, further enhancing charge-hole separation. As a result, the removal capacity of CoWO4/TpDD increases from 515.2 mg/g in the dark to 1754.6 mg/g under light conditions. Thus, constructing a p-n heterojunction proves to be an effective strategy for remediating uranium-contaminated environments.

Red and near-infrared light-activated photoelectrochemical nanobiosensors for biomedical target detection

Photoelectrochemical (PEC) nanobiosensors integrate molecular (bio)recognition elements with semiconductor/plasmonic photoactive nanomaterials to produce measurable signals after light-induced reactions. Recent advancements in PEC nanobiosensors, using light-matter interactions, have significantly improved sensitivity, specificity, and signal-to-noise ratio in detecting (bio)analytes. Tunable nanomaterials activated by a wide spectral radiation window coupled to electrochemical transduction platforms have further improved detection by stabilizing and amplifying electrical signals. This work reviews PEC biosensors based on nanomaterials like metal oxides, carbon nitrides, quantum dots, and transition metal chalcogenides (TMCs), showing their superior optoelectronic properties and analytical performance for the detection of clinically relevant biomarkers. Furthermore, it highlights the innovative role of red light and NIR-activated PEC nanobiosensors in enhancing charge transfer processes, protecting them from biomolecule photodamage in vitro and in vivo applications. Overall, advances in PEC detection systems have the potential to revolutionize rapid and accurate measurements in clinical diagnostic applications. Their integration into miniaturized devices also supports the development of portable, easy-to-use diagnostic tools, facilitating point-of-care (POC) testing solutions and real-time monitoring.

Anisotropic Dual S-Scheme Heterojunctions Mimic Natural Photosynthetic System for Boosting Photoelectric Response

The design of heterojunctions that mimic natural photosynthetic systems holds great promise for enhancing photoelectric response. However, the limited interfacial space charge layer (SCL) often fails to provide sufficient driving force for the directional migration of inner charge carriers. Drawing inspiration from the electron transport chain (ETC) in natural photosynthesis system, we developed a novel anisotropic dual S-scheme heterojunction artificial photosynthetic system composed of Bi2O3-BiOBr-AgI for the first time, with Bi2O3 and AgI selectively distributed along the bicrystal facets of BiOBr. Compared to traditional semiconductors, the anisotropic carrier migration in BiOBr overcomes the recombination resulting from thermodynamic diffusion, thereby establishing a potential ETC for the directional migration of inner charge carriers. Importantly, this pioneering bioinspired design overcomes the limitations imposed by the limited distribution of SCL in heterojunctions, resulting in a remarkable 55-fold enhancement in photoelectric performance. Leveraging the etching of thiols on Ag-based materials, this dual S-scheme heterojunction is further employed in the construction of photoelectrochemical sensors for the detection of acetylcholinesterase and organophosphorus pesticides.

Efficient CO2 Conversion through a Novel Dual-Fiber Reactor System

Carbon dioxide (CO2) can be converted to valuable organic chemicals using light irradiation and photocatalysis. Today, light-energy loss, poor conversion efficiency, and low quantum efficiency (QE) hamper the application of photocatalytic CO2 reduction. To overcome these drawbacks, we developed an efficient photocatalytic reactor platform for producing formic acid (HCOOH) by coating an iron-based metal-organic framework (Fe-MOF) onto side-emitting polymeric optical fibers (POFs) and using hollow-fiber membranes (HFMs) to deliver bubble-free CO2. The photocatalyst, Fe-MOF with amine-group (-NH2) decoration, provided exceptional dissolved inorganic carbon (DIC) absorption. The dual-fiber system gave a CO2-to-HCOOH conversion rate of 116 ± 1.2 mM h-1 g-1, which is ≥18-fold higher than the rates in photocatalytic slurry systems. The 12% QE obtained using the POF was 18-fold greater than the QE obtained by a photocatalytic slurry. The conversion efficiency and product selectivity of CO2-to-HCOOH were up to 22 and 99%, respectively. Due to the dual efficiencies of bubble-free CO2 delivery and the high QE achieved using the POF platform, the dual-fiber system had energy consumption of only 0.60 ± 0.05 kWh mol-1, 3000-fold better than photocatalysis using slurry-based systems. This innovative dual-fiber design enables efficient CO2 valorization without the use of platinum group metals or rare earth elements.

Visible-Light Photocatalytic Degradation Efficiency of Tetracycline and Rhodamine B Using a Double Z-Scheme Heterojunction Catalyst of UiO-66-NH2/BiOCl/Bi2S3

BiOCl is a promising photocatalyst, but due to its weak visible light absorption capacity and low photogenerated electron-hole pair separation rate, its practical application is limited to a certain extent. In this study, a novel double Z-scheme heterojunction UiO-66-NH2/BiOCl/Bi2S3 catalyst was constructed to broaden the visible light response range and promote high photogenerated hole-electron separation of BiOCl. Its photocatalytic performance is evaluated by dissociating tetracycline (TC) and rhodamine B (RhB) in visible light. The optimal proportion of UiO-66-NH2/BiOCl/Bi2S3 hybrids exhibits the best degradation efficiency of visible light illumination (∼93% in 120 min for TC and ∼98% in 60 min for RhB). The synergistic effect of a large visible light response range and the Z-scheme charge transfer mechanism ensure the excellent visible photocatalytic activity of UiO-66-NH2/BiOCl/Bi2S3. It is proven that h+ and •O2- are the main active substances in the photocatalysis process by active substance capture experiments and electron spin resonance tests. The intermediates and degradation processes are analyzed by high-performance liquid chromatography-mass spectrometry. This study proves that the new UiO-66-NH2/BiOCl/Bi2S3 photocatalyst has great application potential in the field of water pollution degradation and will provide a new idea for the optimization of BiOCl.

Engineered Probiotic Bio-Heterojunction with Robust Antibiofilm Modality via "Eating" Extracellular Polymeric Substances for Wound Regeneration

The compact three-dimensional (3D) structure of extracellular polymeric substances (EPS) within biofilms significantly hinders the penetration of antimicrobial agents, making biofilm eradication challenging and resulting in persistent biofilm-associated infections. To address this challenge, a solution is proposed: a probiotic bio-heterojunction (P-bioHJ) combining Lactobacillus rhamnosus with MXene (Ti3C2) quantum dots (MQDs)/FeS heterojunction. This innovation aims to break down the saccharides in EPS, enabling effective combat against biofilm-associated infections. Initially, the P-bioHJ targets saccharides through metabolic processes, causing the collapse of EPS and allowing infiltration into bacterial colonies. Simultaneously, upon exposure to near-infrared (NIR) irradiation, the P-bioHJ produces reactive oxygen species (ROS) and thermal energy, deploying physical mechanisms to combat bacterial biofilms effectively. Following antibiofilm treatment, the P-bioHJ adjusts the oxidative environment, reduces wound inflammation by scavenging ROS, boosts antioxidant enzyme activity, and mitigates the NF-κB inflammatory pathway, thereby accelerating wound healing. In vitro and in vivo experiments confirm the exceptional antibiofilm, antioxidant/anti-inflammatory, and wound-regeneration properties of P-bioHJ. In conclusion, this study provides a promising approach for treating biofilm-related infections.