Achieving High-Performance Ternary Organic Solar Cells through Tuning Acceptor Alloy

Hypoxia-tolerant polymeric photosensitizer prodrug for cancer photo-immunotherapy

Although photodynamic immunotherapy represents a promising therapeutic approach against malignant tumors, its efficacy is often hampered by the hypoxia and immunosuppressive conditions within the tumor microenvironment (TME) following photodynamic therapy (PDT). In this study, we report the design guidelines towards efficient Type-I semiconducting polymer photosensitizer and modify the best-performing polymer into a hypoxia-tolerant polymeric photosensitizer prodrug (HTPSNiclo) for cancer photo-immunotherapy. HTPSNiclo not only performs Type-I PDT process to partially overcome the limitation of hypoxic tumors in PDT by recycling oxygen but also specifically releases a Signal Transducer and Activator of Transcription-3 (STAT3) inhibitor (Niclosamide) in response to a cancer biomarker in the TME. Consequently, HTPSNiclo inhibits the phosphorylation of STAT3, and suppresses the expression of hypoxia-inducible factor-1α. The synergistic effect results in the enhanced activation of immune cells (including mature dendritic cells, cytotoxic T cells) and production of immunostimulatory cytokines compared to Type-I PDT alone. Thus, HTPSNiclo-mediated photodynamic immunotherapy enhances tumor inhibition rate from 75.53% to 91.23%, prolongs the 100% survival from 39 days to 60 days as compared to Type-I PDT alone. This study not only provides the generic approach towards design of polymer-based Type-I photosensitizers but also uncovers effective strategies to counteract the immunosuppressive TME for enhanced photo-immunotherapy in 4T1 tumor bearing female BALB/c mice.

Tunable band alignment and large power conversion efficiency in a two-dimensional InS/ZnIn2S4 heterostructure

Heterostructures can efficiently modulate the bandgap of semiconductors and enhance the separation of photocarriers, thereby enhancing the performance of optoelectronic devices. Herein, we design an InS/ZnIn2S4 van der Waals (vdW) heterostructure and investigate its electronic and photovoltaic properties using first principles calculation. Compared to its individual monolayers, the InS/ZnIn2S4 heterostructure not only possesses a smaller band gap of 2.21 eV and superior light absorption performance in the visible short-wavelength region (<500 nm) but also forms a type-II1 band alignment. Moreover, a large power conversion efficiency (PCE) of 10.86% is achieved. The transformation of the band alignment from type-II1 to type-I or type-II2 can be forced using an external electric field, and the PCE can be further increased up to 12.19% at a positive E ⊥ of 0.2 V Å-1. Within a critical biaxial strain of 4%, the type-II1 band alignment can be maintained, and a high PCE of 20.80% is achieved at a tensile strain (ε) of 4%. Our results may suggest a potential optoelectronic application direction for the InS/ZnIn2S4 heterostructure and offer effective means to enhance its optoelectronic device performance.

Compromising Charge Generation and Recombination of Organic Photovoltaics with Mixed Diluent Strategy for Certified 19.4% Efficiency

The ternary blend is demonstrated as an effective strategy to promote the device performance of organic photovoltaics (OPVs) due to the dilution effect. While the compromise between the charge generation and recombination remains a challenge. Here, a mixed diluent strategy for further improving the device efficiency of OPV is proposed. Specifically, the high-performance OPV system with a polymer donor, i.e., PM6, and a nonfullerene acceptor (NFA), i.e., BTP-eC9, is diluted by the mixed diluents, which involve a high bandgap NFA of BTP-S17 and a low bandgap NFA of BTP-S16 (similar with that of the BTP-eC9). The BTP-S17 of better miscibility with BTP-eC9 can dramatically enhance the open-circuit voltage (V_OC ), while the BTP-S16 maximizes the charge generation or the short-circuit current density (J_SC ). The interplay of BTP-17 and BTP-S16 enables better compromise between charge generation and recombination, thus leading to a high device performance of 19.76% (certified 19.41%), which is the best among single-junction OPVs. Further analysis on carrier dynamics validates the efficacy of mixed diluents for balancing charge generation and recombination, which can be further attributed to the more diverse energetic landscapes and improved morphology. Therefore, this work provides an effective strategy for high-performance OPV for further commercialization.

Morphology Optimization of the Photoactive Layer through Crystallinity and Miscibility Regulation for High-performance Polymer Solar Cells

On the premise of strongly crystalline materials involved, it is a challenge to control the phase separation of bulk-heterojunction donor/acceptor active layer to fabricate high-performance polymer solar cells (PSCs). Herein, we develop a molecular design strategy of the third component to synthesize three guest materials (namely BTPT, BTP-Th, and BTP-2Th) to address this issue. We investigate and reveal the effect of crystallinity and miscibility of the third component in controlling the phase separation of Y6-derivatives-based blend film. As a result, a remarkable power-conversion efficiency of 18.53 % is obtained in the ternary PSC based on PTQ10 : m-BTP-PhC6 with BTP-Th as the third component, which is a significant improvement with regard to the efficiency of 17.22 % for the control binary device. Our study offers a molecular design strategy to develop a third component for building ternary PSCs in terms of crystallinity and miscibility regulation.

Over 19.2% Efficiency of Organic Solar Cells Enabled by Precisely Tuning the Charge Transfer State Via Donor Alloy Strategy

The large energy loss (E_loss ) is one of the main obstacles to further improve the photovoltaic performance of organic solar cells (OSCs), which is closely related to the charge transfer (CT) state. Herein, ternary donor alloy strategy is used to precisely tune the energy of CT state (E_CT ) and thus the E_loss for boosting the efficiency of OSCs. The elevated E_CT in the ternary OSCs reduce the energy loss for charge generation (ΔE_CT ), and promote the hybridization between localized excitation state and CT state to reduce the nonradiative energy loss (ΔE_nonrad ). Together with the optimal morphology, the ternary OSCs afford an impressive power conversion efficiency of 19.22% with a significantly improved open-circuit voltage (V_oc ) of 0.910 V without sacrificing short-cicuit density (J_sc ) and fill factor (FF) in comparison to the binary ones. This contribution reveals that precisely tuning the E_CT via donor alloy strategy is an efficient way to minimize E_loss and improve the photovoltaic performance of OSCs.

Novel Third Components with (Thio)barbituric Acid as the End Groups Improving the Efficiency of Ternary Solar Cells

Developing novel third component is critical for the ternary organic solar cells (TOSCs). Herein, we design and synthesize two novel third components, MAZ-1 and MAZ-2, with 1,3-diethyl-2-thiobarbituric acid and 1,3-dimethylbarbituric acid as the weak electron withdrawing end groups, respectively. Both MAZ-1 and MAZ-2 could improve the photovoltaic performance of the binary OSCs based on D18:Y6 which exhibit the power conversion efficiency (PCE) of 17%, because the third components can optimize the phase separation, suppress the bimolecular recombination, and decrease the nonradiative energy loss in ternary blends. The PCE of the optimized TOSCs approaches 18% along with the simultaneous increase in open circuit voltage, short circuit current density, and fill factor by incorporating 10 wt % MAZ-1 and MAZ-2 in acceptors. This work enriches the building blocks for novel third components for achieving highly efficient TOSCs.

Nonalloy Model-Based Ternary Organic Solar Cells

Ternary blending based on an alloy-like model has been proved as an efficient strategy for high-efficiency organic solar cells (OSCs). However, the third component that possesses excellent miscibility with host materials in the alloy-like model may trigger adverse effects for the active layer, especially at a high doping ratio. In this work, we propose a new concept of nonalloy model for the ternary OSCs in which the third component presents moderate miscibility with the acceptor and distributes at the interspace between donor and acceptor domains. The nonalloy model is constructed based on the PM6:Y6 system, and a Y6 analogue (BTP-MCA) is synthesized as the third component. The BTP-MCA can maintain initial excellent morphology of the active layer and enhance the morphological stability by acting as a frame around the host materials. As a result, ternary OSCs based on the PM6:Y6:BTP-MCA blend exhibit an impressive efficiency of 17.0% with a high open-circuit voltage of 0.87 V. Moreover, the devices present a high doping tolerance (keeping high efficiency with a doping ratio of 50%) and improved stability. This work indicates that the nonalloy model can be a promising method to fabricate efficient and stable ternary OSCs apart from the conventional alloy-like model.

Recent Progress in Organic Solar Cells: A Review on Materials from Acceptor to Donor

In the last few decades, organic solar cells (OSCs) have drawn broad interest owing to their advantages such as being low cost, flexible, semitransparent, non-toxic, and ideal for roll-to-roll large-scale processing. Significant advances have been made in the field of OSCs containing high-performance active layer materials, electrodes, and interlayers, as well as novel device structures. Particularly, the innovation of active layer materials, including novel acceptors and donors, has contributed significantly to the power conversion efficiency (PCE) improvement in OSCs. In this review, high-performance acceptors, containing fullerene derivatives, small molecular, and polymeric non-fullerene acceptors (NFAs), are discussed in detail. Meanwhile, highly efficient donor materials designed for fullerene- and NFA-based OSCs are also presented. Additionally, motivated by the incessant developments of donor and acceptor materials, recent advances in the field of ternary and tandem OSCs are reviewed as well.

Two Compatible Acceptors as an Alloy Model with a Halogen-Free Solvent for Efficient Ternary Polymer Solar Cells

A ternary strategy of halogen-free solvent processing can open up a promising pathway for the preparation of polymer solar cells (PSCs) on a large scale and can effectively improve the power conversion efficiency with an appropriate third component. Herein, the green solvent o-xylene (o-XY) is used as the main solvent, and the non-fullerene acceptor Y6-DT-4F as the third component is introduced into the PBB-F:IT-4F binary system to broaden the spectral absorption and optimize the morphology to achieve efficient PSCs. The third component, Y6-DT-4F, is compatible with IT-4F and can form an "alloy acceptor", which can synergistically optimize the photon capture, carrier transport, and collection capabilities of the ternary device. Meanwhile, Y6-DT-4F has strong crystallinity, so when introduced into the binary system as the third component can enhance the crystallization, which is conducive to the charge transport. Consequently, the optimal ternary system based on PBB-F:IT-4F:Y6-DT-4F achieved an efficiency of 15.24%, which is higher than that of the binary device based on PBB-F:IT-4F (13.39%).

Dilution effect for highly efficient multiple-component organic solar cells

Although the multiple-component (MC) blend strategy has been frequently used as a very effective way to improve the performance of organic solar cells (OSCs), there is a strong need to understand the fundamental working mechanism and material selection rule for achieving optimal MC-OSCs. Here we present the 'dilution effect' as the mechanism for MC-OSCs, where two highly miscible components are molecularly intermixed. Contrary to the aggregation-induced non-radiative decay, the dilution effect enables higher luminescence quantum efficiencies and open-circuit voltages (V_OC) in MC-OSCs via suppressed electron-vibration coupling. The continuously broadened bandgap together with reduced electron-vibration coupling also explains the composition-dependent V_OC in ternary blends well. Moreover, we show that electrons can transfer between different acceptors, depending on the energy offset between them, which contributes to the largely unperturbed charge transport and high fill factors in MC-OSCs. The discovery of the dilution effect enables the demonstration of a high power conversion efficiency of 18.31% in an MC-OSC.

3D Nanoscale Morphology Characterization of Ternary Organic Solar Cells

It is highly desired to develop advanced characterization techniques to explore the 3D nanoscale morphology of the complicated blend film of ternary organic solar cells (OSCs). Here, ternary OSCs are constructed by incorporating the nonfullerene acceptor perylenediimide (PDI)-diketopyrrolopyrrole (DPP)-PDI and their morphology is characterized in depth to understand the performance variation. In particular, photoinduced force microscopy (PiFM) coupled with infrared laser spectroscopy is conducted to qualitatively study the distribution of donor and acceptors in the blend film by chemical identification and to quantitatively probe the segmentation of domains and the domain size distribution after PDI-DPP-PDI acceptor incorporation by PiFM imaging and data processing. In addition, the energy-filtered transmission electron microscopy with energy loss spectra is utilized to visualize the nanoscale morphology of ultrathin cross-sections in the configuration of the real ternary device for the first time in the field of photovoltaics. These measurements allow to "view" the surface and cross-sectional morphology and provide strong evidence that the PDI-DPP-PDI acceptor can suppress the aggregation of the fullerene molecules and generate the homogenous morphology with a higher-level of the molecularly mixed phase, which can prevent the charge recombination and stabilize the morphology of photoactive layer.

Approaching 18% efficiency of ternary organic photovoltaics with wide bandgap polymer donor and well compatible Y6 : Y6-1O as acceptor

A series of ternary organic photovoltaics (OPVs) are fabricated with one wide bandgap polymer D18-Cl as donor, and well compatible Y6 and Y6-1O as acceptor. The open-circuit-voltage (VOC ) of ternary OPVs is monotonously increased along with the incorporation of Y6-1O, indicating that the alloy state should be formed between Y6 and Y6-1O due to their excellent compatibility. The energy loss can be minimized by incorporating Y6-1O, leading to the VOC improvement of ternary OPVs. By finely adjusting the Y6-1O content, a power conversion efficiency of 17.91% is achieved in the optimal ternary OPVs with 30 wt% Y6-1O in acceptors, resulting from synchronously improved short-circuit-current density (JSC ) of 25.87 mA cm-2, fill factor (FF) of 76.92% and VOC of 0.900 V in comparison with those of D18-Cl : Y6 binary OPVs. The JSC and FF improvement of ternary OPVs should be ascribed to comprehensively optimal photon harvesting, exciton dissociation and charge transport in ternary active layers. The more efficient charge separation and transport process in ternary active layers can be confirmed by the magneto-photocurrent and impedance spectroscopy experimental results, respectively. This work provides new insight into constructing highly efficient ternary OPVs with well compatible Y6 and its derivative as acceptor.

A Simple Dithieno[3,2-b:2',3'-d]pyrrol-Rhodanine Molecular Third Component Enables Over 16.7% Efficiency and Stable Organic Solar Cells

Organic solar cells (OSCs) can achieve greatly improved power conversion efficiency (PCE) by incorporating suitable additives in active layers. Their structure design often faces the challenge of operation generality for more binary blends. Herein, a simple dithieno[3,2-b:2',3'-d]pyrrole-rhodanine molecule (DR8) featuring high compatibility with polymer donor PM6 is developed as a cost-effective third component. By employing classic ITIC-like ITC6-4Cl and Y6 as model nonfullerene acceptors (NFAs) in PM6-based binary blends, DR8 added PM6:ITC6-4Cl blends exhibit significantly promoted energy transfer and exciton dissociation. The PM6:ITC6-4Cl:DR8 (1:1:0.1, weight ratio) OSCs contribute an exciting PCE of 14.94% in comparison to host binary devices (13.52%), while PM6:Y6:DR8 (1:1.2:0.1) blends enable 16.73% PCE with all simultaneously improved photovoltaic parameters. To the best of the knowledge, this performance is among the best for ternary OSCs with simple small molecular third components in the literature. More importantly, DR8-added ternary OSCs exhibit much improved device stability against thermal aging and light soaking over binary ones. This work provides new insight on the design of efficient third components for OSCs.

Recent advances, challenges and prospects in ternary organic solar cells

The past decade has seen a tremendous development of organic solar cells (OSCs). To date, high-performance OSCs have boosted power conversion efficiencies (PCEs) over 17%, showing bright prospects toward commercial applications. Compared with binary OSCs, ternary OSCs, by introducing a third component as a second donor or acceptor into the active layer, have great potential in realizing outstanding photovoltaic performance. Herein, a comprehensive review of the recent advances of ternary solar cells is presented. According to the chemical components of active layer materials, we classify the ternary systems into four categories, including polymer/small molecule/small molecule, polymer/polymer/small molecule, all-polymer and all-small-molecule types. The relationships among the photovoltaic materials structure and weight ratio, active layer morphology and photovoltaic performance are systematically analyzed and summarized. The features and design strategies of each category are also discussed and summarized. Key issues and challenges faced in ternary OSCs are pointed out, and potential strategies and solutions are proposed. This review may provide guidance for the field of ternary OSCs.

Comparing Benzodithiophene Unit with Alkylthionaphthyl and Alkylthiobiphenyl Side-Chains in Constructing High-Performance Nonfullerene Solar Cells

Using single-bonded and fused aromatic rings are two methods for extending the π-conjugation in the vertical direction of benzo [1,2-b:4,5-b'] dithiophene (BDT) unit. To investigate which method is more efficient in nonfullerene systems, two novel polymers based on alkylthionaphthyl and alkylthiobiphenyl substituted BDT named PBDTNS-FTAZ and PBDTBPS-FTAZ are designed and synthesized. Two polymers only exhibit small differences in structure, but huge differences in photovoltaic properties. They are studied by blended with 3,9-bis(2-methylene-(3-(1,1-dicyanomethylene)indanone)-5,5,11,11-tetrakis(4-hexylphenyl)dithieno [2,3-d':2,3'-d']-s-indaceno [1,2-b:5,6-b'] dithiophene (ITIC). The device based on PBDTNS-FTAZ:ITIC showed the best power conversion efficiency (PCE) of 9.63% with the Voc of 0.87 V, a Jsc of 18.06 mA/cm2 and a fill factor of 61.21%, while the PBDTBPS-FTAZ:ITIC only exhibit a maximum PCE of 7.79% with a Voc of 0.86 V, a Jsc of 16.24 mA/cm2 and a relatively low fill factor of 55.92%. Therefore, extending π-conjugation with alkylthionaphthyl is more effective against constructing nonfullerene solar cells.

Over 15% Efficiency in Ternary Organic Solar Cells by Enhanced Charge Transport and Reduced Energy Loss

In this study, an efficient ternary bulk-heterojunction (BHJ) organic solar cell (OSC) is demonstrated by incorporating two acceptors, PC₆₁BM and ITC6-4F, with a polymer donor (PM6). This reveals that the addition of PC₆₁BM not only enhances the electron mobility of the derived BHJ blend but also facilitates exciton dissociation, resulting in a more balanced charge transport alongside with reduced trap-assisted charge recombination. Consequently, as compared to the pristine PM6/ITC6-4F device, the optimal ternary OSC is revealed to deliver an improved power conversion efficiency (PCE) of 15.11% with a boosted J_SC, V_OC, and fill factor (FF) simultaneously. The resultant V_OC and FF are among the highest values recorded in the literature for the ternary OSCs with a PCE exceeding 15%. This result thus suggests that besides improving the charge transport characteristics in devices, incorporating a fullerene derivative as part of the acceptor can also improve the resultant V_OC, which can reduce the energy loss to realize efficient organic photovoltaics.

Alloy-like ternary polymer solar cells with over 17.2% efficiency

Ternary strategy has been considered as an efficient method to achieve high performance polymer solar cells (PSCs). A power conversion efficiency (PCE) of 17.22% is achieved in the optimized ternary PSCs with 10 wt% MF1 in acceptors. The over 8% PCE improvement by employing ternary strategy is attributed to the simultaneously increased J_SC of 25.68 mA cm^-2, V_OC of 0.853 V and FF of 78.61% compared with Y6 based binary PSCs. The good compatibility of MF1 and Y6 can be confirmed from Raman mapping, contact angle, cyclic voltammetry and morphology, which is the prerequisite to form alloy-like state. Electron mobility in ternary active layers strongly depends on MF1 content in acceptors due to the different lowest unoccupied molecular orbital (LUMO) levels of Y6 and MF1, which can well explain the wave-like varied FF of ternary PSCs. The third-party certified PCE of 16.8% should be one of the highest values for single bulk heterojunction PSCs. This work provides sufficient references for selecting materials to achieve efficient ternary PSCs.

Hybrid ZnO Electron Transport Layer by Down Conversion Complexes for Dual Improvements of Photovoltaic and Stable Performances in Polymer Solar Cells

Polymer solar cells (PSCs) have shown excellent photovoltaic performance, however, extending the spectral response range to the ultraviolet (UV) region and enhancing the UV light stability remain two challenges to overcome in the development of PSCs. Lanthanide down-conversion materials can absorb the UV light and re-emit it at the visible region that matches well with the absorption of the active layer material PTB7-Th (poly[[2,6′-4,8-di(5-ethylhexylthienyl)benzo[1,2-b;3,3-b]dithiophene][3-fluoro-2[(2-ethylhexyl)carbony]thieno[3,4-b]thiophenediyl]]) and PBDB-T-2F, thus helping to enhance the photovoltaic performance and UV light stability of PSCs. In this research, a down-conversion material Eu(TTA)₃phen (ETP) is introduced into the cathode transport layer (ZnO) in PSCs to manipulate its nanostructure morphology for its application in hyperfine structure of PSCs. The device based on the ZnO/ETP electron transport layer can obtain power conversion efficiencies (PCEs) of 9.22% (PTB7-Th–PC₇₁BM ([6,6]-phenylC₇₁-butyric acid methyl ester) device) and 13.12% (PBDB-T-2F–IT-4F device), respectively. Besides, in the research on PTB7-Th-PC₇₁BM device, the stability of the device based on ZnO/ETP layer is prolonged by 70% compared with the ZnO device. The results suggest that the ZnO/ETP layer plays the role of enhanced photovoltaic performance and prolonged device stability, as well as reducing photo-loss and UV degradation for PSCs.

Nonhalogenated-Solvent-Processed Efficient Polymer Solar Cells Enabled by Medium-Band-Gap A-π-D-π-A Small-Molecule Acceptors Based on a 6,12-Dihydro-diindolo[1,2-b:10,20-e]pyrazine Unit

In this contribution, a series of A-π-D-π-A small molecules (SMs), IPY-T-IC, IPY-T-ICCl, and IPY-T-ICF, containing the central donor unit (D) of 6,12-dihydro-diindolo[1,2-b:10,20-e]pyrazine (IPY), the π-conjugated bridge of thiophene, and the end-accepting group (A) of 3-(dic yanomethylidene)indol-1-one, 5,6-dichloro-3-(dicyanomethylidene)indol-1-one, or 5,6-difluoro-3-(dicyanomethylene)indol-1-one, were developed, characterized, and employed as the acceptor materials for polymer solar cells (PSCs). Influences of the different end-accepting groups on thermal properties, spectral absorption, energy levels, photovoltaic performance, and film morphology of these small-molecule acceptors (SMAs) were investigated in detail. These SMAs exhibit an excellent thermal stability and strong crystallization. The absorption spectra of these SMs mainly locate the wavelength between 400 and 700 nm, associated with the optical band gaps in the range of 1.75-1.90 eV. Compared with nonhalogenated IPY-T-IC, the halogenated SMAs IPY-T-ICCl and IPY-T-ICF present better absorption abilities, wider absorption region, and downshifted highest occupied molecular orbital (HOMO)/lowest unoccupied molecular orbital (LUMO) levels. With regard to the complementary spectral absorption and matched HOMO/LUMO levels, PTB7-Th as a low-band gap polymer was chosen to be an electron donor to pair with these SMAs for fabricating bulk-heterojuntion PSCs. Under optimized conditions, among these SMAs, the PTB7-Th:IPY-T-IC-based PSC processed from a halogenated solvent system (chlorobenzene + 1-chloronaphthalene) delivers the best power conversion efficiency (PCE) of 7.32%, mainly because of more complementary spectral absorption, upper-lying LUMO level, higher and balanced carrier mobility, more efficiently suppressed trap-assisted recombination, better charge collection property, and blend morphology. Encouragingly, an improved PCE of up to 7.68% is achieved when the IPY-T-IC-based solar cell was processed from a nonhalogenated solvent system (o-xylene + 2-methylnaphthalene). In view of the large band gap of these IPY-based SMAs, the PCE of over 7.5% is notable and attractive for the related community. Our study argues that the IPY moiety is a potential electron-donating building moiety to develop medium-band-gap high-performance A-π-D-π-A SMAs for nonhalogenated-solvent-processed photovoltaic devices.

Ternary Polymer Solar Cells Facilitating Improved Efficiency and Stability

The use of a ternary active layer offers a promising approach to enhance the power conversion efficiency (PCE) of polymer solar cells (PSCs) via simply incorporating a third component. Here, a ternary PSC with improved efficiency and stability facilitated by a new small molecule IBC-F is demonstrated. Even though the PBDB-T:IBC-F-based device gives an extremely low PCE of only 0.21%, a remarkable PCE of 15.06% can be realized in the ternary device based on PBDB-T:IE4F-S:IBC-F with 20% IBC-F, which is ≈10% greater than that (PCE = 13.70%) of the control binary device based on PBDB-T:IE4F-S. The improvement in the device performance of the ternary PSC is mainly attributed to the enhancement of fill factor, which is due to the improved charge dissociation and extraction, suppressed bimolecular and trap-assisted recombination, longer charge-carrier lifetime, and enhanced intermolecular interactions for preferential face-on orientation. Additionally, the ternary device with 20% IBC-F shows better thermal and photoinduced stability over the control binary device. This work provides a new angle to develop the third components for building ternary PSCs with enhanced photovoltaic performance and stability for practical applications.

Miscibility Tuning for Optimizing Phase Separation and Vertical Distribution toward Highly Efficient Organic Solar Cells

Blending multidonor or multiacceptor organic materials as ternary devices has been recognized as an efficient and potential method to improve the power conversion efficiency of bulk heterojunction devices or single-junction components in tandem design. In this work, a highly crystalline molecule, DRCN5T, is involved into a PTB7-Th:PC70BM system to fabricate large-area organic solar cells (OSCs) whose blend film thickness is up to 270 nm, achieving an impressive performance of 11.1%. The significant improvement of OSCs after adding DRCN5T is due to the formation of an interconnected fibrous network with decreased π-π stacking and enhanced domain purity, in addition to the optimized vertical distribution of PTB7-Th and PC70BM, producing more effective charge separation, transport, and collection. The optimized morphology and performance are actually determined by the miscibility in different components, which can be quantitatively described by the Flory-Huggins interaction parameter of -0.80 and 2.94 in DRCN5T:PTB7-Th and DRCN5T:PC70BM blends, respectively. The findings in this work can potentially guide the selection of an appropriate third additive for high-performance OSCs for the sake of large-area printing and roll-to-roll fabrication from the view of miscibility.

Ternary System with Intermolecular Hydrogen Bond: Efficient Strategy to High-Performance Nonfullerene Organic Solar Cells

To boost organic solar cell (OSC) performance, numerous approaches have been developed, such as synthesizing new materials, using post-annealing (thermal or solvent annealing) or fabricating ternary devices. The ternary strategy is usually used as an uncomplicated and effective way, but how to choose the third component and the effect of interactions between materials on OSC performance still need to be clarified. Herein, we proposed a new finding that the carbonyl group of 3,9-bis(2-methylene-(3-(1,1-dicyanomethylene)-indanone))-5,5,11,11-tetrakis(4-hexylphenyl)-dithieno[2,3-d:2',3'-d']-s-indaceno[1,2-b:5,6-b'] dithiophene (ITIC) end groups can react with the dye molecule SR197 to form the N-H···O noncovalent interaction. The existence of intermolecular hydrogen bonds was confirmed using Fourier transform infrared spectra and two-dimensional proton nuclear magnetic resonance. The power conversion efficiency (PCE) was improved to 10.29% via doping SR197 into blends of PTB7-Th:ITIC, which exhibited a huge enhancement of approximately 30% compared with the binary OSCs (PCE = 7.92%). The ternary OSCs of PBDB-T:SR197:ITIC could also achieve high PCE (11.03%) without post-thermal or solvent annealing. Transmission electron microscopy and grazing-incidence wide-angle X-ray scattering showed the optimized morphology and enhanced crystallinity of ternary systems, which is facilitated to exciton dissociation and charge transmission. These conclusions mean that the H-bonding strategy is an effective way for selecting the third component and could achieve high-performance OSCs.

Conjugated Donor-Acceptor Terpolymers Toward High-Efficiency Polymer Solar Cells

The development of conjugated alternating donor-acceptor (D-A) copolymers with various electron-rich and electron-deficient units in polymer backbones has boosted the power conversion efficiency (PCE) over 17% for polymer solar cells (PSCs) over the past two decades. However, further enhancements in PCEs for PSCs are still imperative to compensate their imperfect stability for fulfilling practical applications. Meanwhile development of these alternating D-A copolymers is highly demanding in creative design and syntheses of novel D and/or A monomers. In this regard, when being possible to adopt an existing monomer unit as a third component from its libraries, either a D' unit or an A' moiety, to the parent D-A type polymer backbones to afford conjugated D-A terpolymers, it will give a facile and cost-effective method to improve their light absorption and tune energy levels and also interchain packing synergistically. Moreover, the rationally controlled stoichiometry for these components in such terpolymers also provides access for further fine-tuning these factors, thus resulting in high-performance PSCs. Herein, based on their unique features, the recent progress of conjugated D-A terpolymers for efficient PSCs is reviewed and it is discussed how these factors influence their photovoltaic performance, for providing useful guidelines to design new terpolymers toward high-efficiency PSCs.

13%-Efficiency Quaternary Polymer Solar Cell with Nonfullerene and Fullerene as Mixed Electron Acceptor Materials

In this article, we report 13%-efficiency quaternary polymer solar cell. By introducing bis-PC₇₁BM:PC₇₁BM into a known nonfullerene system-poly[(2,6-(4,8-bis(5-(2-ethylhexyl)thiophen-2-yl))benzo[1,2- b:4,5- b']dithiophene)- co-(1,3-di(5-thiophene-2-yl)-5,7-bis(2-ethylhexyl)benzo[1,2- c:4,5- c']dithiophene-4,8-dione):3,9-bis(2-methylene-(3-(1,1-dicyanomethylene)-indanone-methyl))-5,5,11,11-tetrakis(4- n-hexylphenyl)-dithieno[2,3 d:2',3' d']- s-indaceno[1,2 b:5,6 b']dithiophene (PBDB-T:IT-M), the quaternary solar cell significantly outperforms the nonfullerene binary and the ternary (PBDB-T:IT-M:fullerene) devices with a significant increase in the short-circuit current-density (18.2 vs 16.5 and 16.8-17.5 mA/cm²) and the fill factor (0.73 vs 0.67 and 0.707-0.726), and hence, large power conversion efficiency (13% for quaternary vs 11% for the binary and 12% for the ternary). Grazing incidence wide-angle X-ray scattering data indicate that both the polymer and IT-M phase crystallinity becomes greater upon introduction of PC₇₁BM as the forth additive into the host ternary PBDB-T:IT-M:bis-PC₇₁BM, which results in an increase in both the electron and hole mobilities, contributing to the J_sc enhancement. Our results indicate that the use of the forth fullerene component provides more choices and more mechanisms than the ternary systems for tuning the photon-to-electron conversion; therefore, sheds light on the realization of high-efficiency polymer solar cells by designing the multiacceptor components with aligned energy levels, complementary absorption spectra, and improved film morphologies.

Pyrene-Imidazole Based Aggregation Modifier Leads to Enhancement in Efficiency and Environmental Stability for Ternary Organic Solar Cells

A novel pyrene-imidazole derivative (PyPI), which can form effcient π-π stacking in solid film, has been utilized in organic solar cells (OSCs). The stacking of small a molecule PyPI can facilitate a charge transfer and suppress fullerene aggregation. As a result, PTB7-Th: PyPI: PC₇₁BM based ternary OSC exhibits a high power conversion efficiency (PCE) of 10.36%, which presents a 15.88% increase from the binary device (8.94%). Concurrently, the ternary OSC shows a much better thermal and light illumination stability. Under continuous 60°C annealing for 3 h, in atmosphere, the device still remains at 94.13% efficiency more than the pristine state, while the control device remains at 52.47% PCE. Constant illumination under Air Mass (AM) 1.5G irradiation (100 mW cm⁻²) in atmosphere, the PCE of OSC remains at 72.50%. The high conversion efficiency and excellent environmental stability of the PyPI based ternary OSC, has narrowed the gap between laboratory investigation and industrial production.

Improved efficiency and thermal stability of ternary all-small-molecule organic solar cells by NCBA as a third component material

In this work, organic solar cells (OSCs) were fabricated with a blend of PC₇₁BM and p-DTS-(FBTTh₂)₂ employed as a binary photoactive layer and with a dihydronaphthyl-based C60 bisadduct (NCBA) small-molecule acceptor used as a third component material. We demonstrate that the short-circuit current density (J_SC), open-circuit voltage (V_OC), fill factor (FF), power conversion efficiency (PCE), and thermal stability can all be enhanced simultaneously. In addition, the crystallinity can be finely optimized and the photon harvesting ability was enhanced for short-wavelength light by adjusting the NCBA doping ratio, leading to efficient exciton dissociation and charge-carrier transport. At the same time, the ternary photoactive layer, with a small amount of NCBA as a third component material, reduced monomolecular recombination and bimolecular recombination under open-circuit and short-circuit conditions, respectively. Such a ternary structure with NCBA as a third component material helped enhance the crystallinity and fix the surface morphology of the photoactive layer, thus reducing the decay ratio while increasing the thermal annealing treatment time. Consequently, the PCE reaches 9.1% for ternary OSCs with a 12 wt% NCBA doping ratio in a blended acceptor, with 87.2% of the initial PCE value maintained after 100 h of thermal annealing treatment at 90 °C, which is much higher than that obtained for the PCE of binary OSCs.

Iris-Like Acceptor with Most PDI Units for Organic Solar Cells

Mother Nature is always the best source for scientists to draw inspiration. Herein, a three-dimensional perylene diimide (PDI)-based molecular acceptor was designed and synthesized, in which six PDI units form an "iris-like" structure upon connecting with the hexaphenylbenzene core. Interestingly, this molecule is the nonfullerene acceptor containing most PDI units, which can absorb solar light to exhibit excellent power conversion efficiency, much more efficient than the natural flowers. This contribution presents an interesting example of learning from Mother Nature to design novel materials for applications.

Nonfullerene/Fullerene Acceptor Blend with a Tunable Energy State for High-Performance Ternary Organic Solar Cells

Ternary blending is an effective strategy for broadening the absorption range of the active layer in bulk heterojunction polymer solar cells and for constructing an efficient cascade energy landscape at the donor/acceptor interface to achieve high efficiencies. In this study, we report efficient ternary blend solar cells containing an acceptor alloy consisting of the indacenodithiophene-based nonfullerene material, IDT2BR, and the fullerene material, phenyl-C₇₁-butyric acid methyl ester (PC₇₁BM). The IDT2BR materials mix fully with PC₇₁BM materials, and the energy state of this phase can be tuned by varying the blending ratio. We performed photoluminescence and external quantum efficiency studies and found that the ternary charge cascade structure efficiently transfers the photogenerated charges from the polymer to IDT2BR and finally to PC₇₁BM materials. Ternary blend devices containing the IDT2BR:PC₇₁BM acceptor blend and various types of donor polymers were found to exhibit power conversion efficiencies (PCEs) improved by more than 10% over the PCEs of the binary blend devices.

Effect of dihydronaphthyl-based C60 bisadduct as third component materials on the photovoltaic performance and charge carrier recombination of binary PBDB-T : ITIC polymer solar cells

A dihydronaphthyl-based C60 bisadduct (NCBA) acceptor was introduced as a third component to typical poly[(2,6-(4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)-benzo[1,2-b:4,5-b0]dithiophene))-alt-(5,5-(10,30-di-2-thienyl-50,70-bis(2-ethylhexyl)benzo[10,20-c:40,50-c0]dithiophene-4,8-dione))] (PBDB-T): 3,9-bis(2-methylene-(3-(1,1-dicyanomethylene)-indanone))-5,5,11,11-tetrakis(4-hexylphenyl)-dithieno[2,3-d:20,30-d0]-s-indaceno[1,2-b:5,6-b0]-dithiophene (ITIC) binary polymer solar cells (PSCs). NCBA plays a bridging role between the lowest unoccupied molecular orbital (LUMO) of PBDB-T and ITIC and provides more routes for charge carrier transfer at the interface between PBDB-T and ITIC, whereupon a higher open-circuit voltage (VOC) could be realized upon the addition of NCBA relative to the neat ITIC as an electron acceptor. With the strong visible light absorption in the range from 300 to 520 nm of the NCBA molecule, it had the effect of apparently complementary visible light absorption compared with the binary PBDB-T : ITIC layer. The crystallinity and surface morphology of the PBDB-T : NCBA : ITIC (1 : 0.1 : 0.9) thin films was similar to that of the binary PBDB-T : ITIC layer, which guaranteed suitable efficient exciton dissociation and charge carrier transport. The photocurrent density versus effective voltage (Jph-Veff) curves, short-circuit current density (JSC), and VOC as a function of incident light intensity as well as the transient photovoltage (TPV) and transient photocurrent (TPC) were measured, and the results illustrated the effects of NCBA as third component materials in terms of efficient exciton dissociation and reduced charge carrier recombination and loss. The PBDB-T : NCBA : ITIC (1 : 0.1 : 0.9)-based PSCs showed an optimized PCE value of 9.56% and better thermal stability after 10 h thermal annealing treatment (the normalized PCE value was 92.5% of the initial PCE value).

Blade-Cast Nonfullerene Organic Solar Cells in Air with Excellent Morphology, Efficiency, and Stability

Blade-coating serving as a prototype tool for slot-die coating can be very compatible with large-area roll-to-roll coating. Using blade-coating in an ambient environment, an average power conversion efficiency (PCE) of 10.03% is achieved in nonfullerene organic solar cells, which is higher than that of the optimal spin-coated device with a PCE of 9.41%. It is demonstrated that blade-coating can induce a higher degree of molecular packing for both conjugated polymer donors and small-molecular acceptors as it helps to produce a seeding film containing numerous crystal grains, subsequently providing nucleation sites for the residual solution when the motion of the blade exposes a liquid front. Due to this effect, blade-coating can partially replace the role of the additive 1,8-diiodooctane (DIO) and thus achieves the optimized morphology with fewer additives. Moreover, it is found that the blade-coated film with 0.25% DIO possesses not only a smaller domain size but also higher domain purity, suggesting more D/A (donor/acceptor) interfaces and a purer phase domain as compared to the spin-coated film with 1% DIO. Encouragingly, the blade-coated device with less DIO (0.25%) exhibits much better stability than the spin-coated device with 1% DIO, showing excellent prospects.

Nonfullerene Acceptor Molecules for Bulk Heterojunction Organic Solar Cells

The bulk-heterojunction blend of an electron donor and an electron acceptor material is the key component in a solution-processed organic photovoltaic device. In the past decades, a p-type conjugated polymer and an n-type fullerene derivative have been the most commonly used electron donor and electron acceptor, respectively. While most advances of the device performance come from the design of new polymer donors, fullerene derivatives have almost been exclusively used as electron acceptors in organic photovoltaics. Recently, nonfullerene acceptor materials, particularly small molecules and oligomers, have emerged as a promising alternative to replace fullerene derivatives. Compared to fullerenes, these new acceptors are generally synthesized from diversified, low-cost routes based on building block materials with extraordinary chemical, thermal, and photostability. The facile functionalization of these molecules affords excellent tunability to their optoelectronic and electrochemical properties. Within the past five years, there have been over 100 nonfullerene acceptor molecules synthesized, and the power conversion efficiency of nonfullerene organic solar cells has increased dramatically, from ∼2% in 2012 to >13% in 2017. This review summarizes this progress, aiming to describe the molecular design strategy, to provide insight into the structure-property relationship, and to highlight the challenges the field is facing, with emphasis placed on most recent nonfullerene acceptors that demonstrated top-of-the-line photovoltaic performances. We also provide perspectives from a device point of view, wherein topics including ternary blend device, multijunction device, device stability, active layer morphology, and device physics are discussed.

High-Performance Organic Bulk-Heterojunction Solar Cells Based on Multiple-Donor or Multiple-Acceptor Components

Organic solar cells (OSCs) based on bulk heterojunction structures are promising candidates for next-generation solar cells. However, the narrow absorption bandwidth of organic semiconductors is a critical issue resulting in insufficient usage of the energy from the solar spectrum, and as a result, it hinders performance. Devices based on multiple-donor or multiple-acceptor components with complementary absorption spectra provide a solution to address this issue. OSCs based on multiple-donor or multiple-acceptor systems have achieved power conversion efficiencies over 12%. Moreover, the introduction of an additional component can further facilitate charge transfer and reduce charge recombination through cascade energy structure and optimized morphology. This progress report provides an overview of the recent progress in OSCs based on multiple-donor (polymer/polymer, polymer/dye, and polymer/small molecule) or multiple-acceptor (fullerene/fullerene, fullerene/nonfullerene, and nonfullerene/nonfullerene) components.

High Performing Ternary Solar Cells through Förster Resonance Energy Transfer between Nonfullerene Acceptors

Nonradiative Förster resonance energy transfer (FRET) is an important mechanism of organic solar cells, which can improve the exciton migration over a long distance, resulting in improvement of efficiency of solar cells. However, the current observations of FRET are very limited, and the efficiencies are less than 9%. In this study, FRET effect was first observed between two nonfullerene acceptors in ternary solar cells, which improved both the absorption range and exciton harvesting, leading to the dramatic enhancement in the short circuit current and power conversion efficiency. Moreover, this strategy is proved to be a versatile platform for conjugated polymers with different bandgaps, resulting in a remarkable efficiency of 10.4%. These results demonstrated a novel method to enhance the efficiency of organic soar cells.