High Performance Graphene/Ni2 P Hybrid Anodes for Lithium and Sodium Storage through 3D Yolk-Shell-Like Nanostructural Design

Synergistic enhancement of Ni2P anode for high lithium/sodium storage by N, P, S triply-doping and soft template-assisted strategy

Transition metal phosphides have demonstrated excellent performance in the field of energy conversion and storage, where nickel phosphide is one of the most prominent type of phosphides. However, achieving long cycle life with higher specific capacity in the case of Ni2P is still a great challenge. In this study, the composition and structure of Ni2P composites are rationally and precisely adjusted by heteroatoms doping and micelle-assisted methods to attain high capacity for longer cycles at high rate. Among all studied combinations, nickel phosphide particles anchored to triple heteroatom (N, P, S) doped carbon network skeleton (Ni2P@NPS) exhibited specific capacities of 727.3, 586.6, and 321.5 mA h g-1 after 1000 cycles at 1, 2 and 6 A g-1 for lithium-ion batteries (LIBs) and 230.1 mA h g-1 at 1 A g-1 for sodium-ion batteries (SIBs) after 560 cycles. The introduction of heteroatoms optimized the electronic structure of the electrode materials and promoted mass and charge transfer, while triple-heteroatom doped carbon substrates and uniformly dispersed spherical structures formed an active three-dimensional conductive network structure that provided a stronger driving force and richer channels for Li+/Na+ transport. Theoretical calculations showed that the high content of pyrrole nitrogen as well as the additional sulfur ensured improved electrical conductivity and enhanced ion adsorption performance. This study encourages further research into the synergistic effect of N, P, S co-doping materials for improving Li+/Na+ storage and the exploration of other heteroatom co-doping systems.

Balancing Potassiophilicity and Catalytic Activity of Artificial Interface Layer for Dendrite-Free Sodium/Potassium Metal Batteries

Potassium metal batteries (PMBs), with high energy density and low cost, are considered a promising option for grid-scale energy storage systems. However, challenges such as the uneven nucleation of K and instability of the solid electrolyte interphase (SEI) layer result in dendrite growth and poor cyclic performance, limiting practical application. To address them, constructing an artificial interface layer with rich defects can enhance the potassium affinity and promote the uniform nucleation of potassium, yet this can also catalyze electrolyte to decompose, leading to unstable SEI formation and poor cycle stability. Herein, a carbon layer with a locally ordered structure (SC-1600) is constructed as the artificial interface to achieve a balance between K affinity and catalytic activity. This optimized design allows for the uniform nucleation of potassium metal and the formation of a dense SEI layer. SC-1600@K symmetric cell can operate for 2000 h at 0.5 mA cm-2 with a capacity of 0.5 mAh cm-2, and the developed full cell shows a high capacity retention of 78% after 1500 cycles at 1 A g-1. Besides, SC-1600@Na effectively extend the life of sodium metal batteries. This work provides a new insight for the construction of efficient K metal artificial interface layer.

Anion-Dominated Solvation in Low-Concentration Electrolytes Promotes Inorganic-Rich Interphase Formation in Lithium Metal Batteries

While the formation of an inorganic-rich solid electrolyte interphase (SEI) plays a crucial role, the persistent challenge lies in the formation of an organic-rich SEI due to the high solvent ratio in low-concentration electrolytes (LCEs), which hinders the achievement of high-performance lithium metal batteries. Herein, by incorporating di-fluoroethylene carbonate (DFEC) as a non-solvating cosolvent, a solvation structure dominated by anions is introduced in the innovative LCE, leading to the creation of a durable and stable inorganic-rich SEI. Leveraging this electrolyte design, the Li||NCM83 cell demonstrates exceptional cycling stability, maintaining 82.85% of its capacity over 500 cycles at 1 C. Additionally, Li||NCM83 cell with a low N/P ratio (≈2.57) and reduced electrolyte volume (30 µL) retain 87.58% of its capacity after 150 cycles at 0.5 C. Direct molecular information is utilized to reveal a strong correlation between solvation structures and reduction sequences, proving the anion-dominate solvation structure can impedes the preferential reduction of solvents and constructs an inorganic-rich SEI. These findings shed light on the pivotal role of solvation structures in dictating SEI composition and battery performance, offering valuable insights for the design of advanced electrolytes for next-generation lithium metal batteries.

Construction of sub micro-nano-structured silicon based anode for lithium-ion batteries

The significant volume change experienced by silicon (Si) anodes during lithiation/delithiation cycles often triggers mechanical-electrochemical failures, undermining their utility in high-energy-density lithium-ion batteries (LIBs). Herein, we propose a sub micro-nano-structured Si based material to address the persistent challenge of mechanic-electrochemical coupling issue during cycling. The mesoporous Si-based composite submicrospheres (M-Si/SiO2/CS) with a high Si/SiO2content of 84.6 wt.% is prepared by magnesiothermic reduction of mesoporous SiO2submicrospheres followed by carbon coating process. M-Si/SiO2/CS anode can maintain a high specific capacity of 740 mAh g-1at 0.5 A g-1after 100 cycles with a lower electrode thickness swelling rate of 63%, and exhibits a good long-term cycling stability of 570 mAh g-1at 1 A g-1after 250 cycles. This remarkable Li-storage performance can be attributed to the synergistic effects of the hierarchical structure and SiO2frameworks. The spherical structure mitigates stress/strain caused by the lithiation/delithiation, while the internal mesopores provide buffer space for Si expansion and obviously shorten the diffusion path for electrolyte/ions. Additionally, the amorphous SiO2matrix not only servers as support for structure stability, but also facilitates the rapid formation of a stable solid electrolyte interphase layer. This unique architecture offers a potential model for designing high-performance Si-based anode for LIBs.

Reinterpreting the Intercalation-Conversion Mechanism of FeP Anodes in Lithium/Sodium-Ion Batteries from Evolution of the Magnetic Phase

Batteries with intercalation-conversion-type electrodes tend to achieve high-capacity storage, but the complicated reaction process often suffers from confusing electrochemical mechanisms. Here, we reinterpreted the essential issue about the potential of the conversion reaction and whether there is an intercalation reaction in a lithium/sodium-ion battery (LIB/SIB) with the FeP anode based on the evolution of the magnetic phase. Especially, the ever-present intercalation process in a large voltage range followed by the conversion reaction with extremely low potential was confirmed in FeP LIB, while it is mainly the conversion reaction for the sodium storage mechanism in FeP SIB. The insufficient conversion reaction profoundly limits the actual capacity to the expectedly respectable value. Accordingly, a graphene oxide modification strategy was proposed to increase the reversible capacity of FeP LIB/SIB by 99% and 132%, respectively. The results facilitate the development of anode materials with a high capacity and low operating potential.

Reduced Graphene Oxide Coating LiFePO4 Composite Cathodes for Advanced Lithium-Ion Battery Applications

Recently, the application of LiFePO4 (LFP) batteries in electric vehicles has attracted extensive attention from researchers. This work presents a composite of LFP particles trapped in reduced graphene oxide (rGO) nanosheets obtained through the high-temperature reduction strategy. The obtained LiFePO4/rGO composites indicate spherical morphology and uniform particles. As to the structure mode of the composite, LFP distributes in the interlayer structure of rGO, and the rGO evenly covers the surface of the particles. The LFP/rGO cathodes demonstrate a reversible specific capacity of 165 mA h g-1 and high coulombic efficiency at 0.2 C, excellent rate capacity (up to 10 C), outstanding long-term cycling stability (98%) after 1000 cycles at 5 C. The combined high electron conductivity of the layered rGO coating and uniform LFP particles contribute to the remarkable electrochemical performance of the LFP/rGO composite. The unique LFP/rGO cathode provides a potential application in high-power lithium-ion batteries.

Engineering CoP Alloy Foil to a Well-Designed Integrated Electrode Toward High-Performance Electrochemical Energy Storage

Nanostructured integrated electrodes with binder-free design show great potential to solve the ever-growing problems faced by currently commercial lithium-ion batteries such as insufficient power and energy densities. However, there are still many challenging problems limiting practical application of this emerging technology, in particular complex manufacturing process, high fabrication cost, and low loading mass of active material. Different from existing fabrication strategies, here using a CoP alloy foil as a precursor  a simple neutral salt solution-mediated electrochemical dealloying method to well address the above issues is demonstrated. The resultant freestanding mesoporous np-Co(OH)_x /Co₂ P product possesses not only active compositions of high specific capacity and large electrode packing density (>3.0 g cm^-3 ) to meet practical capacity requirements, high-conductivity and well-developed nanoporous framework to achieve simultaneously fast ion and electron transfer, but also interconnected ligaments and suitable free space to ensure strong structural stability. Its comprehensively excellent electrochemical energy storage (EES) performances in both lithium/sodium-ion batteries and lithium-ion capacitors can further illustrate the effectiveness of the integrated electrode preparation strategy, such as remarkable reversible specific capacities/capacitances, dominated pseudo-capacitive EES mechanism, and ultra-long cycling life. This study provides new insights into preparation and design of high-performance integrated electrodes for practical applications.

The electrosorption behavior of shuttle-like FeP: performance and mechanism

Owing to its high electrochemical ability, the FeP is envisioned to be the potential electrode for capacitive deionization (CDI) with enhanced performance. However, it suffers from poor cycling stability due to the active redox reaction. In this work, a facile approach has been designed to prepare the mesoporous shuttle-like FeP using MIL-88 as the template. The porous shuttle-like structure not only alleviates the volume expansion of FeP during the desalination/salination process but also promotes ion diffusion dynamics by providing convenient ion diffusion channels. As a result, the FeP electrode has demonstrated a high desalting capacity of 79.09 mg g⁻¹ at 1.2 V. Further, it proves the superior capacitance retention, which maintained 84% of the initial capacity after the cycling. Based on post-characterization, a possible electrosorption mechanism of FeP has been proposed.

In this work, mesoporous shuttle-like FeP for electrosorption is prepared. As an electrode, it achieves a high salt adsorption capacity of 79.09 mg g⁻¹ and superior capacitance retention. The conversion of Fe^II to Fe^III is responsible for the removal of salty ions.

Phosphorus/Phosphide-Based Materials for Alkali Metal-Ion Batteries

Phosphorus- and phosphide-based materials with remarkable physicochemical properties and low costs have attracted significant attention as the anodes of alkali metal (e.g., Li, Na, K, Mg, Ca)-ion batteries (AIBs). However, the low electrical conductivity and large volume expansion of these materials during electrochemical reactions inhibit their practical applications. To solve these problems, various promising solutions have been explored and utilized. In this review, the recent progress in AIBs using phosphorus- and phosphide-based materials is summarized. Thereafter, the in-depth working principles of diverse AIBs are discussed and predicted. Representative works with design concepts, construction approaches, engineering strategies, special functions, and electrochemical results are listed and discussed in detail. Finally, the existing challenges and issues are concluded and analyzed, and future perspectives and research directions are given. This review can provide new guidance for the future design and practical applications of phosphorus- and phosphide-based materials used in AIBs.

Synthesis of Highly Active Carbon-encapsulated Ni2P Catalysts by One-step Pyrolysis–phosphidation for Hydrodeoxygenation of Phenolic Compounds

Hydrodeoxygenation (HDO) of phenolic compounds is a promising technology to convert biomass materials to value-added chemicals and fuels. However, the development of highly efficient catalysts remains a great challenge. In...

Versatile Preparation of Mesoporous Single-Layered Transition-Metal Sulfide/Carbon Composites for Enhanced Sodium Storage

Transition-metal sulfides are promising electrochemical energy storage materials due to their abundant active sites, large interlayer space, and high theoretical capacities, especially for sodium storage. However, the low conductivity and poor cycling stability at high current densities hamper their applications. Herein, a versatile dual-template method is reported to elaborate ordered mesoporous single-layered MoS₂ /carbon composite with high specific area, uniform pore size, and large pore volume. The single-layered MoS₂ is confined in the carbon matrix. The mesopores between the composite nanorods provide fast electrolyte diffusion. The obtained nanocomposite shows a high sodium-storage capability, excellent rate capacity, and very good cycling performance. A capacity of 310 mAh g^-1 can remain at 5.0 A g^-1 after 2500 cycles. Furthermore, a sodium-ion battery (SIB) full cell composed of the MoS₂ /carbon composite anode and a Na₃ V₂ (PO₄ )₃ (NVP) cathode maintains a specific capacity of 330 mAh g^-1 at 1.0 A g^-1 during 100 cycles. The mechanism is investigated by in situ and ex situ characterizations as well as density functional theory (DFT) calculations.

Two-in-one template-assisted construction of hollow phosphide nanotubes for electrochemical energy storage

In this work, the template-assisted method was used to develop novel Ni2P@PANI hollow nanotubes as a positive electrode material for supercapacitors by using prepared polyaniline (PANI) nanotubes as precursors, and...

A Coral-Like FeP@NC Anode with Increasing Cycle Capacity for Sodium-Ion and Lithium-Ion Batteries Induced by Particle Refinement

We present a coral-like FeP composite with FeP nanoparticles anchored and dispersed on a nitrogen-doped 3D carbon framework (FeP@NC). Due to the highly continuous N-doped carbon framework and a spring-buffering graphitized carbon layer around the FeP nanoparticle, a sodium-ion battery with the FeP@NC composite exhibits an ultra-stable cycling performance at 10 A g^-1 with a capacity retention of 82.0 % in 10 000 cycles. Also, particle refinement leads to a capacity increase during cycling. The FeP nanoparticles go through a refining-recombination process during the first cycle and present a global refining trend after dozens of cycles, which results in a gradually increase in graphitization degree and interface magnetization, and further provides more active sites for Na⁺ storage and contributes to a rising capacity with cycling. The capacity ascending phenomenon can also extend to lithium-ion batteries.

Oxygen Vacancies Boosting Lithium-Ion Diffusion Kinetics of Lithium Germanate for High-Performance Lithium Storage

Oxygen vacancies play a positive role in optimizing the physical and chemical properties of metal oxides. In this work, we demonstrated oxygen vacancy-promoted enhancement of Li-ion diffusion kinetics in Li₂GeO₃ nanoparticle-encapsulated carbon nanofibers (denoted as Li₂GeO_3-x/C) and accordingly boosted lithium storage. The introduction of the oxygen vacancies in Li₂GeO_3-x/C can enhance electronic conductivity and evidently decrease activation energy of Li-ion transport, thus resulting in evidently accelerated Li-ion diffusion kinetics during the lithiation/delithiation process. Thus, the Li₂GeO_3-x/C nanofibers exhibit an exceptionally large discharge capacity of 1460.5 mA h g^-1 at 0.1 A g^-1, high initial Coulombic efficiency of 81.3%, and excellent rate capability. This facile and efficient strategy could provide a reference for injecting the oxygen vacancies into other metal oxides for high-performance anode materials.

Iron Selenide Microcapsules as Universal Conversion-Typed Anodes for Alkali Metal-Ion Batteries

Rechargeable alkali metal-ion batteries (AMIBs) are receiving significant attention owing to their high energy density and low weight. The performance of AMIBs is highly dependent on the electrode materials. It is, therefore, quite crucial to explore suitable electrode materials that can fulfil the future requirements of AMIBs. Herein, a hierarchical hybrid yolk-shell structure of carbon-coated iron selenide microcapsules (FeSe₂ @C-3 MCs) is prepared via facile hydrothermal reaction, carbon-coating, HCl solution etching, and then selenization treatment. When used as the conversion-typed anode materials (CTAMs) for AMIBs, the yolk-shell FeSe₂ @C-3 MCs show advantages. First, the interconnected external carbon shell improves the mechanical strength of electrodes and accelerates ionic migration and electron transmission. Second, the internal electroactive FeSe₂ nanoparticles effectively decrease the extent of volume expansion and avoid pulverization when compared with micro-sized solid FeSe₂ . Third, the yolk-shell structure provides sufficient inner void to ensure electrolyte infiltration and mobilize the surface and near-surface reactions of electroactive FeSe₂ with alkali metal ions. Consequently, the designed yolk-shell FeSe₂ @C-3 MCs demonstrate enhanced electrochemical performance in lithium-ion batteries, sodium-ion batteries, and potassium-ion batteries with high specific capacities, long cyclic stability, and outstanding rate capability, presenting potential application as universal anodes for AMIBs.

Ultra-small Fe3O4 nanodots encapsulated in layered carbon nanosheets with fast kinetics for lithium/potassium-ion battery anodes

Iron oxides are regarded as promising anodes for both lithium-ion batteries (LIBs) and potassium-ion batteries (KIBs) due to their high theoretical capacity, abundant reserves, and low cost, but they are also facing great challenges due to the sluggish reaction kinetics, low electronic conductivity, huge volume change, and unstable electrode interphases. Moreover, iron oxides are normally prepared at high temperature, forming large particles because of Ostwald ripening, and exhibiting low electronic/ionic conductivity and unfavorable mechanical stability. To address those issues, herein, we have synthesized ultra-small Fe₃O₄ nanodots encapsulated in layered carbon nanosheets (Fe₃O₄@LCS), using the coordination interaction between catechol and Fe³⁺, demonstrating fast reaction kinetics, high capacity, and typical capacitive-controlled electrochemical behaviors. Such Fe₃O₄@LCS nanocomposites were derived from coordination compounds with layered structures via van der Waals's force. Fe₃O₄@LCS-500 (annealed at 500 °C) nanocomposites have displayed attractive features of ultra-small particle size (∼5 nm), high surface area, mesoporous and layered feature. When used as anodes, Fe₃O₄@LCS-500 nanocomposites delivered exceptional electrochemical performances of high reversible capacity, excellent cycle stability and rate performance for both LIBs and KIBs. Such exceptional performances are highly associated with features of Fe₃O₄@LCS-500 nanocomposites in shortening Li/K ion diffusion length, fast reaction kinetics, high electronic/ionic conductivity, and robust electrode interphase stability.

Ultra-small Fe₃O₄ nanodots encapsulated in layered carbon nanosheet nanocomposites were synthesized, showing fast reaction kinetics, high conductivity, and robust stability.

Boosting reaction kinetics and reversibility in Mott-Schottky VS2/MoS2 heterojunctions for enhanced lithium storage

Heterostructures have lately been recognized as a viable implement to achieve high-energy Li-ion batteries (LIBs) because the as-formed built-in electric field can greatly accelerate the charge transfer kinetics. Herein, we have constructed the Mott-Schottky heterostructured VS₂/MoS₂ hybrids with tailorable 1T/2H phase based on their matchable formation energy, which are made of metallic and few-layered VS₂ vertically grown on MoS₂ surface. The density functional theory (DFT) calculations unveil that such heterojunctions drive the rearrangement of energy band with a facilitated reaction kinetics and enhance the Li adsorption energy more than twice compared to the MoS₂ surface. Furthermore, the VS₂ catalytically expedites the Li-S bond fracture and meantime the enriched Mo⁶⁺ enables the sulfur anchoring toward the oriented reaction with Li⁺ to form Li₂S, synergistically enhancing the reversibility of electrochemical redox. Consequently, the as-obtained VS₂/MoS₂ hybrids deliver a very large specific capacity of 1273 mAh g^-1 at 0.1 A g^-1 with 61% retention even at 5 A g^-1. It can also stabilize 100 cycles at 0.5 A g^-1 and 500 cycles at 1 A g^-1. The findings provide in-depth insights into engineering heterojunctions towards the enhancement of reaction kinetics and reversibility for LIBs.

Achieving Fast and Durable Lithium Storage through Amorphous FeP Nanoparticles Encapsulated in Ultrathin 3D P-Doped Porous Carbon Nanosheets

Conversion-type transition-metal phosphide anode materials with high theoretical capacity usually suffer from low-rate capability and severe capacity decay, which are mainly caused by their inferior electronic conductivities and large volumetric variations together with the poor reversibility of discharge product (Li₃P), impeding their practical applications. Herein, guided by density functional theory calculations, these obstacles are simultaneously mitigated by confining amorphous FeP nanoparticles into ultrathin 3D interconnected P-doped porous carbon nanosheets (denoted as FeP@CNs) via a facile approach, forming an intriguing 3D flake-CNs-like configuration. As an anode for lithium-ion batteries (LIBs), the resulting FeP@CNs electrode not only reaches a high reversible capacity (837 mA h g^-1 after 300 cycles at 0.2 A g^-1) and an exceptional rate capability (403 mA h g^-1 at 16 A g^-1) but also exhibits extraordinary durability (2500 cycles, 563 mA h g^-1 at 4 A g^-1, 98% capacity retention). By combining DFT calculations, in situ transmission electron microscopy, and a suite of ex situ microscopic and spectroscopic techniques, we show that the superior performances of FeP@CNs anode originate from its prominent structural and compositional merits, which render fast electron/ion-transport kinetics and abundant active sites (amorphous FeP nanoparticles and structural defects in P-doped CNs) for charge storage, promote the reversibility of conversion reactions, and buffer the volume variations while preventing pulverization/aggregation of FeP during cycling, thus enabling a high rate and highly durable lithium storage. Furthermore, a full cell composed of the prelithiated FeP@CNs anode and commercial LiFePO₄ cathode exhibits impressive rate performance while maintaining superior cycling stability. This work fundamentally and experimentally presents a facile and effective structural engineering strategy for markedly improving the performance of conversion-type anodes for advanced LIBs.

Hierarchical Design of Mn2P Nanoparticles Embedded in N,P-Codoped Porous Carbon Nanosheets Enables Highly Durable Lithium Storage

Although transition metal phosphide anodes possess high theoretical capacities, their inferior electronic conductivities and drastic volume variations during cycling lead to poor rate capability and rapid capacity fading. To simultaneously overcome these issues, we report a hierarchical heterostructure consisting of isolated Mn₂P nanoparticles embedded into nitrogen- and phosphorus-codoped porous carbon nanosheets (denoted as Mn₂P@NPC) as a viable anode for lithium-ion batteries (LIBs). The resulting Mn₂P@NPC design manifests outstanding electrochemical performances, namely, high reversible capacity (598 mA h g^-1 after 300 cycles at 0.1 A g^-1 ), exceptional rate capability (347 mA h g^-1 at 4 A g^-1), and excellent cycling stability (99% capacity retention at 4 A g^-1 after 2000 cycles). The robust structure stability of Mn₂P@NPC electrode during cycling has been revealed by the in situ and ex situ transmission electron microscopy (TEM) characterizations, giving rise to long-term cyclability. Using in situ selected area electron diffraction and ex situ high-resolution TEM studies, we have unraveled the dominant lithium storage mechanism and confirmed that the superior lithium storage performance of Mn₂P@NPC originated from the reversible conversion reaction. Furthermore, the prelithiated Mn₂P@NPC∥LiFePO₄ full cell exhibits impressive rate capability and cycling stability. This work introduces the potential for engineering high-performance anodes for next-generation high-energy-density LIBs.

Zinc Phosphides as Outstanding Sodium-Ion Battery Anodes

To design a high-performance sodium-ion battery anode, binary zinc phosphides (ZnP₂ and Zn₃P₂) were synthesized by a facile solid-state heat treatment process, and their Na storage characteristics were evaluated. The Na reactivity of ZnP₂ was better than that of Zn₃P₂. Therefore, a C-modified ZnP₂-based composite (ZnP₂-C) was fabricated to achieve better electrochemical performance. To investigate the electrochemical reaction mechanism of ZnP₂-C during sodiation/desodiation, various ex situ analytical techniques were employed. During sodiation, ZnP₂ in the composite was transformed into NaZn₁₃ and Na₃P phases, exhibiting a one-step conversion reaction. Conversely, Zn and P in NaZn₁₃ and Na₃P, respectively, were fully recombined to the original ZnP₂ phase during desodiation. Owing to the one-step conversion/recombination of ZnP₂ in the composite during cycling, the ZnP₂-C showed high electrochemical performance with a highly reversible capacity of 883 mA h g^-1 after 130 cycles with no capacity deterioration and a fast C-rate capability of 500 mA h g^-1 at 1 C and 350 mA h g^-1 at 3 C.

Advanced Se3 P4 @C Anode with Exceptional Cycling Life for High Performance Potassium-Ion Batteries

Potassium-ion batteries have attracted increasing attention for next-generation energy storage systems due to their high energy density and abundance of potassium. However, the lack of suitable anode highly hampers its practical application due to the large ionic radius of K⁺ . Herein, a Se₃ P₄ @mesoporous carbon (Se₃ P₄ @C) composite is reported as a high-performance anode for potassium-ion batteries. The Se₃ P₄ @C composite is synthesized through an in situ combination reaction between red phosphorus and Se within a porous carbon matrix. In this way, the nano-sized Se₃ P₄ is well confined in the porous carbon and thus exhibits a close contact with the carbon matrix. This can significantly improve the conductivity and alleviate the volume change during the cycling process. As a result, the Se₃ P₄ @C exhibits a high reversible initial capacity of 1036.8 mAh g^-1 at a current density of 50 mA g^-1 as well as an excellent cycle performance with a capacity decay of 0.07% per cycle over 300 cycles under 1000 mA g^-1 . In terms of high specific capacity and stable cycling performance, the Se₃ P₄ @C anode is a promising candidate for advanced potassium-ion batteries.

NiS2 nanoparticles anchored on open carbon nanohelmets as an advanced anode for lithium-ion batteries

Low intrinsic conductivity and large volume expansion seriously restrict the efficient lithium storage performance of metal sulfides. Here, we fabricate a hybrid material of NiS2 nanoparticles/carbon nanohelmets (NiS2/CNHs) to address the above issues. As an anode material in lithium-ion batteries, NiS2/CNHs exhibit excellent cycling stability (490 mA h g-1 after 3000 cycles at 5 A g-1) and rate properties (412 mA h g-1 at 10 A g-1), outperforming other NiS x -based anode materials. These remarkable performances originate from the three-dimensional helmet-like integrated architecture of NiS2/CNHs, which reduces the electrode resistance due to the tight combination between NiS2 and CNHs, provides efficient diffusion paths for the electrolyte and Li+ owing to the amorphous nanoporous carbon structure, and significantly mitigates the aggregation and buffers the large volumetric expansion of NiS2 nanoparticles upon long-term cycling thanks to the open three-dimensional architecture and well-dispersed NiS2 nanoparticles on it.

Optimizing the Void Size of Yolk-Shell Bi@Void@C Nanospheres for High-Power-Density Sodium-Ion Batteries

Bismuth (Bi) has been demonstrated as a promising anode for Na-ion batteries (NIBs) because it has high gravimetry (386 mA h g^-1) and volumetric capacity (3800 mA h cm^-3). However, Bi suffers from large volume expansion during sodiation, leading to poor electrochemical performance. The construction of a nanostructure with sufficient void space to accommodate the volume change has been proven effective for achieving prolonged cycling stability. However the excessive void space will definitely decrease the volumetric energy density of the battery. Herein, we design optimized Bi@Void@C nanospheres (Bi@Void@C-2) with yolk-shell structure that exhibit the best cycling performance and enhanced volumetric energy density. The optimized void space not only could buffer the volume change of the Bi nanosphere but also could keep the high volumetric energy density of the battery. The Bi@Void@C-2 shows an excellent rate capacity of 173 mA h g^-1 at ultrahigh current density of 100 A g^-1 and long-cycle life (198 mA h g^-1 at 20 A g^-1 over 10 000 cycles). The origin of the superior performance is achieved through in-depth fundamental studies during battery operation using in situ X-ray diffraction (XRD) and in situ transmission electron microscope (TEM), complemented by theoretical calculations and ex situ TEM observation. Our rational design provides insights for anode materials with large volume variation, especially for conversion type and alloying type mechanism materials for batteries (i.e., Li-ion batteries, Na-ion batteries).

3D hierarchical rose-like Ni2P@rGO assembled from interconnected nanoflakes as anode for lithium ion batteries

In recent years, anode materials of transition metal phosphates (TMPs) for lithium ion batteries have drawn a vast amount of attention, due to their high theoretical capacity and comparatively low intercalation potentials vs. Li/Li⁺.

Rationally designed Ni2P/Ni/C as a positive electrode for high-performance hybrid supercapacitors

Ni₂P/Ni/C is fabricated a simple simultaneous carbonization and phosphidation process. It displays exceptional rate performance with excellent cycling ability, mainly resulting from accelerated charge transfer ability and stable porous structure.

A Flexible and Boron-Doped Carbon Nanotube Film for High-Performance Li Storage

Boron-doped carbon nanotubes are a promising candidate for Li storage due to the unique electronic structure and high crystallinity brought by the boron dopants. However, the relatively low Li storage capacity has limited its application in the electrochemical energy storage field, which is mainly caused by the predominantly intact graphitic structure on their surface with limited access points for Li ion entering. Herein, we report a novel B-doped CNTs (py-B-CNTs) film, in which the CNTs possess intrinsically rough surface but flat internal graphitic structure. When used as a flexible anode material for LIBs, this py-B-CNTs film delivers significantly enhanced capacity than the conventional B-doped CNTs or the pristine CNTs films, with good rate capability and excellent cycling performance as well. Moreover, this flexible film also possesses excellent mechanical flexibility, making it capable of being used in a prototype flexible LIB with stable power output upon various bending states.

Rational design of Ni/Ni2P heterostructures encapsulated in 3D porous carbon networks for improved lithium storage

Nickel phosphides are considered to be a promising lithium storage host due to their high theoretical capacities. However, the volume change during the charge-discharge process and inherent poor reaction kinetics limit their electrochemical performance. To solve these problems, Ni/Ni₂P heterostructures encapsulated in 3D porous carbon networks are fabricated. The macro/micro-pores-rich carbon networks are in situ constructed via a freeze-drying method and subsequent pyrolysis route using NaCl as a template. In the following phosphorization process, Ni/Ni₂P nanoparticles are homogenously embedded in the carbon matrix. When used as anodes for lithium ion batteries, the Ni/Ni₂P/porous carbon networks deliver high discharge capacity, good cycling stability as well as good rate performance. It is believed that metallic Ni and porous carbon networks significantly improve the conductivity of electrodes. Moreover, the 3D conductive matrix can not only alleviate the volume change, but also prevent the aggregation and pulverization of Ni₂P nanoparticles during the charge-discharge process.