Porous Amorphous Silicon Hollow Nanoboxes Coated with Reduced Graphene Oxide as Stable Anodes for Sodium-Ion Batteries

Amorphous silicon (a-Si), due to its satisfactory theoretical capacity, moderate discharge potential, and abundant reserves, is treated as one of the most prospective materials for the anode of sodium-ion batteries (SIBs). However, the slow Na⁺ diffusion kinetics, poor electrical conductivity, and rupture-prone structures of a-Si restrict its further development. In this work, a composite (a-Si@rGO) consisting of porous amorphous silicon hollow nanoboxes (a-Si HNBs) and reduced graphene oxide (rGO) is prepared. The a-Si HNBs are synthesized through "sodiothermic reduction" of silica hollow nanoboxes at a relatively low temperature, and the rGO is covered on the surface of the a-Si HNBs by electrostatic interaction. The as-synthesized composite anode applying in SIBs exhibits a high initial discharge capacity of 681.6 mAh g^-1 at 100 mA g^-1, great stability over 2000 cycles at 800 mA g^-1, and superior rate performance (261.2, 176.8, 130.3, 98.4, and 73.3 mAh g^-1 at 100, 400, 800, 1500, and 3000 mA g^-1, respectively). The excellent electrochemical properties are ascribed to synergistic action of the porous hollow nanostructure of a-Si and the rGO coating. This research not only offers an innovative synthetic means for the development of a-Si in various fields but also provides a practicable idea for the design of other alloy-type anodes.

Honeycomb-like 3D carbon skeletons with embedded phosphorus-rich phosphide nanoparticles as advanced anodes for lithium-ion batteries

Phosphorus-rich iron phosphides (FeP₂) have been regarded as excellent anode candidates for lithium storage owing to their low cost, high natural abundance, high theoretical capacity, and reasonable redox potential. However, FeP₂ suffers from a few challenging problems such as low reversibility, fast capacity degradation, and big volume variation. Herein, we have designed and synthesized a 3D honeycomb-like carbon skeleton with embedded FeP₂ nanoparticles (denoted as FeP₂ NPs@CK), which can significantly promote the kinetics and maintain the structural stability during the cycling, resulting in an excellent electrochemical performance reflected by high reversibility and long-term cycling stability. FeP₂ NPs@CK shows high reversibility, delivering a reversible capacity as high as 938 mA h g^-1 at 0.5 A g^-1. It also shows excellent cycling stability, delivering a capacity of 620 mA h g^-1 after 500 cycles at 1 A g^-1. Moreover, the fast kinetics and lithium storage mechanism of FeP₂ NPs@CK are investigated by quantitative analysis and in situ X-ray diffraction. Such superior performance demonstrates that FeP₂ NPs@CK could be a promising and attractive anode candidate for lithium storage.

A Dendrite-Free Lithium-Metal Anode Enabled by Designed Ultrathin MgF2 Nanosheets Encapsulated Inside Nitrogen-Doped Graphene-Like Hollow Nanospheres

Uncontrolled lithium dendrite growth and dramatic volume change during cycling have long been severely impeding the practical applications of Li metal as the ultimate anode. In this work, ultrathin MgF₂ nanosheets encapsulated inside nitrogen-doped graphene-like hollow nanospheres (MgF₂ NSs@NGHSs) are ingeniously fabricated to address these problems by a perfect combination of atomic layer deposition and chemical vapor deposition. The uniform and continuous Li-Mg solid-solution inner layer formed by the MgF₂ nanosheets can reduce the nucleation overpotential and induce selective deposition of Li into the cavities of the NGHSs. Furthermore, the Li deposition behavior and mechanism of the hybrid host are comprehensively explored by in situ optical microscopy at the macroscopic level, in situ transmission electron microscopy at the microscopic level, and theoretical calculations at the atomic level, respectively. Benefiting from a synergistic modulation strategy of nanosheet seed-induced nucleation and Li-confined growth, the designed composite demonstrates an endurance of 590 cycles for asymmetric cells and a lifespan over 1330 h for corresponding symmetric cells. When applied in LiFePO₄ full cells, it provides a reversible capacity of 90.6 mAh g^-1 after 1000 cycles at 1 C.

Dendrites-Free Zn Metal Anodes Enabled by an Artificial Protective Layer Filled with 2D Anionic Nanosheets

Metallic zinc (Zn) has been considered to be an ideal anode material for aqueous batteries, but is impeded by the growth of Zn dendrites and its side reactions with an aqueous electrolyte. Here, it is reported that an artificial protective layer filled with novel 2D Zn²⁺ adsorbed Sb₃ P₂ O₁₄ ^3- (denoted as Zn-Sb₃ P₂ O₁₄ ) nanosheets provide an effective route to mitigate the above challenging problems. The Zn-Sb₃ P₂ O₁₄ protection layer not only avoids the direct contact with the aqueous electrolyte to suppress the side reactions but also allows for Zn-ions to pass through the protection layer rapidly. Moreover, the 2D Sb₃ P₂ O₁₄ ^3- skeleton with negative charge also confines the 2D diffusion of Zn-ion along the lateral surface of Zn anode, resulting in a uniform electron-deposition. This unique protection layer not only enables dendrite-free Zn plating/stripping with an average Coulombic efficiency of 99.2% for 200 cycles, but also sustains the symmetric Zn||Zn cell over 1300 h at 1 mA cm^-2 and 1 mAh cm^-2 as well as for 450 h at 10 mA cm^-2 and 10 mAh cm^-2 . Such advantages bring high reversibility to full Zn batteries with MnO₂ cathodes, which deliver a discharge capacity of 111.7 mAh g^-1 after 1000 cycles.

The Progress and Prospect of Tunable Organic Molecules for Organic Lithium-Ion Batteries

Compared to inorganic electrodes, organic materials are regarded as promising electrodes for lithium-ion batteries (LIBs) due to the attractive advantages of light elements, molecular-level structural design, fast electron/ion transferring, favorable environmental impacts, and flexible feature, etc. Not only specific capacities but also working potentials of organic electrodes are reasonably tuned by polymerization, electron-donating/withdrawing groups, and multifunctional groups as well as conductive additives, which have attracted intensive attention. However, organic LIBs (OLIBs) are also facing challenges on capacity loss, side reactions, electrode dissolution, low electronic conductivity, and short cycle life, etc. Many strategies have been applied to tackle those challenges, and many inspiring results have been achieved in the last few decades. In this review, we have introduced the basic concepts of LIBs and OLIBs, followed by the typical cathode and anode materials with various physicochemical properties, redox reaction mechanisms, and evolutions of functional groups. Typical charge-discharge behaviors and molecular structures of organic electrodes are displayed. Moreover, effective strategies on addressing problems of organic electrodes are summarized to give some guidance on the synthesis of optimized organic electrodes for practical applications of OLIBs.

Ultra-small Fe3O4 nanodots encapsulated in layered carbon nanosheets with fast kinetics for lithium/potassium-ion battery anodes

Iron oxides are regarded as promising anodes for both lithium-ion batteries (LIBs) and potassium-ion batteries (KIBs) due to their high theoretical capacity, abundant reserves, and low cost, but they are also facing great challenges due to the sluggish reaction kinetics, low electronic conductivity, huge volume change, and unstable electrode interphases. Moreover, iron oxides are normally prepared at high temperature, forming large particles because of Ostwald ripening, and exhibiting low electronic/ionic conductivity and unfavorable mechanical stability. To address those issues, herein, we have synthesized ultra-small Fe₃O₄ nanodots encapsulated in layered carbon nanosheets (Fe₃O₄@LCS), using the coordination interaction between catechol and Fe³⁺, demonstrating fast reaction kinetics, high capacity, and typical capacitive-controlled electrochemical behaviors. Such Fe₃O₄@LCS nanocomposites were derived from coordination compounds with layered structures via van der Waals's force. Fe₃O₄@LCS-500 (annealed at 500 °C) nanocomposites have displayed attractive features of ultra-small particle size (∼5 nm), high surface area, mesoporous and layered feature. When used as anodes, Fe₃O₄@LCS-500 nanocomposites delivered exceptional electrochemical performances of high reversible capacity, excellent cycle stability and rate performance for both LIBs and KIBs. Such exceptional performances are highly associated with features of Fe₃O₄@LCS-500 nanocomposites in shortening Li/K ion diffusion length, fast reaction kinetics, high electronic/ionic conductivity, and robust electrode interphase stability.

Ultra-small Fe₃O₄ nanodots encapsulated in layered carbon nanosheet nanocomposites were synthesized, showing fast reaction kinetics, high conductivity, and robust stability.

Green Fabrication of Silkworm Cocoon-like Silicon-Based Composite for High-Performance Li-Ion Batteries

Designing yolk-shell nanostructures is an effective way of addressing the huge volume expansion issue for large-capacity anode and cathode materials in Li-ion batteries (LIBs). Previous studies mainly focused on adopting a SiO₂ template through HF etching to create yolk-shell nanostructures. However, HF etching is highly corrosive and may result in a significant reduction of Si content in the composite. Herein, a silkworm cocoon-like silicon-based composite is prepared through a green approach in which Al₂O₃ was selected as a sacrificial template. The void space between the outer nitrogen-doped carbon (NC) shell formed by chemical vapor deposition using a pyridine precursor and the inside porous silicon nanorods (p-Si NRs) synthesized by magnesiothermic reduction of ordered mesoporous silica nanorods can be generated by etching Al₂O₃ with diluted HCl. The obtained p-Si NRs@void@NC composite is utilized as an anode material for LIBs, which exhibits a large initial discharge capacity of 3161 mAh g^-1 at 0.5 A g^-1, excellent cycling behavior up to 300 cycles, and super rate performance. Furthermore, a deep understanding of the mechanism for the yolk-shell nanostructure during the Li-alloying process is revealed by in situ transmission electron microscopy and finite element simulation.

Hydroquinone Resin Induced Carbon Nanotubes on Ni Foam As Binder-Free Cathode for Li-O2 Batteries

In this work, hydroquinone resin was used to grow carbon nanotubes directly on Ni foam. The composites were obtained via a simple carbonization method, which avoids using the explosive gaseous carbon precursors that are usually applied in the chemical vapor deposition method. When evaluated as cathode for Li-O2 batteries, the binder-free structure showed enhanced ORR/OER activities, thus giving a high rate capability (12690 mAh g(-1) at 200 mA g(-1) and 3999 mAh g(-1) at 2000 mA g(-1)) and outstanding long-term cycling stability (capacity limited 2000 mAh g(-1), 110 cycles at 200 mA g(-1)). The excellent battery performance provides new insights into designing a low-cost and high-efficiency cathode for Li-O2 batteries.

Co3O4-based binder-free cathodes for lithium–oxygen batteries with improved cycling stability

A novel binder-free electrode for lithium–oxygen batteries has been prepared by electrodepositing a Co₃O₄ layer onto a pretreated TiO₂ fiber mesh formed on nickel foam by an electrospinning method.

Surface binding of polypyrrole on porous silicon hollow nanospheres for Li-ion battery anodes with high structure stability

Uniform porous silicon hollow nano-spheres are prepared without any sacrificial templates through a magnesio-thermic reduction of mesoporous silica hollow nanospheres and surface modified by the following in situ chemical polymerization of polypyrrole. The porous hollow structure and polypyrrole coating contribute significantly to the excellent structure stability and high electrochemical performance of the nanocomposite.

In situ catalytic growth of large-area multilayered graphene/MoS2 heterostructures

Stacking various two-dimensional atomic crystals on top of each other is a feasible approach to create unique multilayered heterostructures with desired properties. Herein for the first time, we present a controlled preparation of large-area graphene/MoS₂ heterostructures via a simple heating procedure on Mo-oleate complex coated sodium sulfate under N₂ atmosphere. Through a direct in situ catalytic reaction, graphene layer has been uniformly grown on the MoS₂ film formed by the reaction of Mo species with S pecies, which is from the carbothermal reduction of sodium sulfate. Due to the excellent graphene “painting” on MoS₂ atomic layers, the significantly shortened lithium ion diffusion distance and the markedly enhanced electronic conductivity, these multilayered graphene/MoS₂ heterostructures exhibit high specific capacity, unprecedented rate performance and outstanding cycling stability, especially at a high current density, when used as an anode material for lithium batteries. This work provides a simple but efficient route for the controlled fabrication of large-area multilayered graphene/metal sulfide heterostructures with promising applications in battery manufacture, electronics or catalysis.

Incorporation of heterostructured Sn/SnO nanoparticles in crumpled nitrogen-doped graphene nanosheets for application as anodes in lithium-ion batteries

Sn/SnO nanoparticles are incorporated in crumpled nitrogen-doped graphene nanosheets by a simple melting diffusion method, generating a composite exhibiting excellent electrochemical performance.

Polymorphisms of the angiotensin II type 1 receptor gene affect antihypertensive response to angiotensin receptor blockers in hypertensive Chinese

The renin-angiotensin-aldosterone system plays a key role in regulating blood pressure by maintaining vascular tone and the water/sodium balance. Many antihypertensive drugs target the renin-angiotensin-aldosterone system, but the effect differs considerably among hypertensive patients. We investigated whether genetic variants of the angiotensin II type 1 receptor are associated with blood pressure response to angiotensin II receptor blockers in hypertensive Chinese patients. After a 2-week single-blind placebo run-in period, 148 patients with mild-to-moderate primary hypertension received monotherapy with 80 mg/day telmisartan and then were followed up for 8 weeks. The 1166A/C, 573T/C, -810A/T, and -521C/T polymorphisms of the AT1R gene were determined through PCR and RFLP analysis. The relationship between these polymorphisms and changes in blood pressure was observed and evaluated after 8 weeks of treatment. Patients with the AT1R -521CC genotype had a significant reduction in diastolic blood pressure compared to those carrying the T allele. No significant reduction in blood pressure was found in individuals with the 1166A/C, 573T/C, or -810A/T polymorphisms of the AT1R gene. We conclude that only the AT1R -521CC genotype is associated with a significant decrease in blood pressure in response to telmisartan treatment in Chinese hypertensive patients.